Stimuli-Responsive Dipeptide-Protein Hydrogels through Schiff Base Coassembly

Light-triggered AND logic tetrapeptide dynamic covalent assembly

We demonstrate light-triggered dynamic covalent assembly of a linear short tetrapeptide containing two terminal cysteine residues in an AND logic manner. A photobase generator is introduced to accomplish light-mediated pH regulation to increase the reduction potential of thiols in the tetrapeptide, which activates its oxidative polymerization through disulfide bonds. Interestingly, it is elucidated that under light irradiation, mere co-existence of photobase generator and the oxidizing agent permits the polymerization performance of this tetrapeptide. Hence, a light-triggered AND logic dynamic covalent assembly of a tetrapeptide is achieved. Further, upon redox response, the reversible aggregation and disaggregation can be transformed for numerous times due to the dynamic covalent feature of disulfide bond. As a comparison, no assembly occurs for a short peptide containing one terminal cysteine residue under the same stimuli condition. This work offers a new approach to remotely control programmable molecular assembly of short linear peptides based on dynamic covalent bond, holding great potential in wide bioapplications.

Stimuli-Responsive Protein Hydrogels: Their Design, Properties, and Biomedical Applications

Protein-based hydrogels are considered ideal biomaterials due to their high biocompatibility, diverse structure, and their improved bioactivity and biodegradability. However, it remains challenging to mimic the native extracellular matrices that can dynamically respond to environmental stimuli. The combination of stimuli-responsive functionalities with engineered protein hydrogels has facilitated the development of new smart hydrogels with tunable biomechanics and biological properties that are triggered by cyto-compatible stimuli. This review summarizes the recent advancements of responsive hydrogels prepared from engineered proteins and integrated with physical, chemical or biological responsive moieties. We underscore the design principles and fabrication approaches of responsive protein hydrogels, and their biomedical applications in disease treatment, drug delivery, and tissue engineering are briefly discussed. Finally, the current challenges and future perspectives in this field are highlighted.

Stimulus-Responsive Drug Delivery Nanoplatforms for Osteoarthritis Therapy

Osteoarthritis (OA) is one of the most prevalent age-related degenerative diseases. With an increasingly aging global population, greater numbers of OA patients are providing clear economic and societal burdens. Surgical and pharmacological treatments are the most common and conventional therapeutic strategies for OA, but often fall considerably short of desired or optimal outcomes. With the development of stimulus-responsive nanoplatforms has come the potential for improved therapeutic strategies for OA. Enhanced control, longer retention time, higher loading rates, and increased sensitivity are among the potential benefits. This review summarizes the advanced application of stimulus-responsive drug delivery nanoplatforms for OA, categorized by either those that depend on endogenous stimulus (reactive oxygen species, pH, enzyme, and temperature), or those that depend on exogenous stimulus (near-infrared ray, ultrasound, magnetic fields). The opportunities, restrictions, and limitations related to these various drug delivery systems, or their combinations, are discussed in areas such as multi-functionality, image guidance, and multi-stimulus response. The remaining constraints and potential solutions that are represented by the clinical application of stimulus-responsive drug delivery nanoplatforms are finally summarized.

Synthetic extracellular matrices with function-encoding peptides

The communication of cells with their surroundings is mostly encoded in the epitopes of structural and signalling proteins present in the extracellular matrix (ECM). These peptide epitopes can be incorporated in biomaterials to serve as function-encoding molecules to modulate cell-cell and cell-ECM interactions. In this Review, we discuss natural and synthetic peptide epitopes as molecular tools to bioengineer bioactive hydrogel materials. We present a library of functional peptide sequences that selectively communicate with cells and the ECM to coordinate biological processes, including epitopes that directly signal to cells, that bind ECM components that subsequently signal to cells, and that regulate ECM turnover. We highlight how these epitopes can be incorporated in different biomaterials as individual or multiple signals, working synergistically or additively. This molecular toolbox can be applied in the design of biomaterials aimed at regulating or controlling cellular and tissue function, repair and regeneration.

Self-Assembled Charge-Transfer Chiral π-Materials: Stimuli-Responsive Circularly Polarized Luminescence and Chiroptical Photothermic Effects

Despite significant achievements in the field of chiroptical organic materials, the full utilization of both the excited state and ground state chiroptical properties in a single supramolecular system is still rarely disclosed. Here, we report that the rational combination of the charge-transfer (CT) interaction with the spacer effect and controlled protonation of π-histidine leads to chiroptical organic π-materials with both circularly polarized luminescence (CPL) and the supramolecular chirality-directed chiroptical photothermic effect. Three pyrene-conjugated histidine derivatives with varied acyl linkers (PyHis, PyC1His, and PyC3His) were designed to coassemble with electron-deficient 1,2,4,5-tetracyanobenzene (TCNB), leading to the formation of supramolecular CT complexes with intense orange to red CPL depending on the linker length. The linker length also affected the protonation-induced CPL responsiveness of the corresponding CT assemblies. Upon protonation of the histidine moiety, PyC3His/TCNB CT assemblies exhibited an inverted CPL signal, while PyHis/TCNB pairs gave quenched CPL due to the disassembly. The protonation-controlled PyC3His/TCNB CT assemblies at varied pH values showed different chiroptical photothermic effects (CPEs) for the same incident chiral light despite the molecular chirality of PyC3His remaining unchanged, supporting an interesting supramolecular chirality-directed photothermic effect.

Controlled Covalent Self-Assembly of a Homopolymer for Multiscale Materials Engineering

Polymer self-assembly is a crucial process in materials engineering. Currently, almost all polymer self-assembly is limited to non-covalent bonding methods, even though these methods have drawbacks as they require complicated synthesis techniques and produce relatively unstable structures. Here, a novel mechanism of covalent polymer self-assembly is discovered and employed to address drawbacks of non-covalent polymer self-assembly. A simple ketone homopolymer is found to self-assemble into nano- to macroscale hydrogels during covalent crosslinking. In contrast to non-covalent self-assembly, the covalent self-assembly is independent of and unaffected by solvent conditions (e.g., polarity and ionic strength) and does not require additional agents, e.g., organic solvents and surfactants. The covalent polymer self-assembly is subjected to a new mechanism of control by tuning the covalent crosslinking rate. This leads to nanogels with an unprecedented and tightly controlled range of dimensions from less than 10 nm to above 100 nm. Moreover, the crosslinking rate also regulates the assembly behavior of microgels fabricated by microfluidics. The microgels self-assemble into granular fibers, which is 3D printed into stable porous scaffolds. The novel covalent polymer assembly method has enormous potential to revolutionize multiscale materials fabrication for applications in drug delivery, tissue engineering, and many other fields.

The Schiff Base Probe With J-aggregation Induced Emission for Selective Detection of Cu2

Here, three Schiff bases 3a-c, differing by the substitutions (-H, -Cl, and -N(CH₃)₂) on the phenyl ring, have been designed and synthesized via the reaction of ortho-aminophenol with benzaldehyde, 2,4-dichlorobenzaldehyde and para-dimethylamine benzaldehyde in 1:1 molar ratio with favourable yields of 89-92%, respectively. Their structural characterizations were studied by FT-IR, NMR, MALDI-MS and elemental analysis. The fluorescence behaviours of compounds 3a and 3b exhibited a severe aggregation caused quenching (ACQ) effect in EtOH/water system. On the contrary, compound 3c had an obvious J-aggregation induced emission (AIE) feature in EtOH/water mixture (v/v = 1:1), and exhibited excellent sensitivity and anti-interference towards Cu²⁺ with the limit of detection (LOD) of 1.35 × 10^-8 M. Job's plot analysis and MS spectroscopic study revealed the 2:1 complexation of probe 3c and Cu²⁺. In addition, probe 3c was successfully applied to the determination of Cu²⁺ in real aqueous samples.

Introducing Zirconium Organic Gels for Efficient Radioiodine Gas Removal

Iodine radioisotope, as one of the most important fission products of uranium, may cause severe damage to human health when it is accidentally discharged into the environment. Hence, efficient removal of radioactive iodine is one of the most critical issues for both used nuclear fuel (UNF) reprocessing and environmental remediation. In this work, three metal-organic gels (MOGs) were introduced for iodine removal. The presented zirconium-based MOGs, namely, CWNU, CWNU-NH₂, and CWNU-2NH₂, were prepared via moderate solvothermal reactions. These MOGs all exhibit excellent chemical stability and reusability, marked iodine sorption capability, and favorable machinability, which can even rival commercial ones. The sorption capacities are determined to be 3.36, 4.10, and 4.20 g/g, respectively. The increased amount of amino group is considered to be responsible for the elevated iodine sorption capacity and kinetics, as confirmed by combined sorption studies and XPS analysis. The presented work sheds light on the utilization of MOGs for radioiodine capture.

Dynamic Protein and Polypeptide Hydrogels Based on Schiff Base Co-assembly for Biomedicine

Stimuli-responsive hydrogels are promising building blocks for biomedical devices, attributable to their excellent hydrophilicity, biocompatibility, and dynamic responsiveness to temperature, light, pH, and water content. Although hydrogels find interesting applications...

De novo design of self-assembly hydrogels based on Fmoc-diphenylalanine providing drug release

Short peptides with self-assembled nanostructures are widely applied in the areas of drug delivery systems and biomaterials. In this article, we create a new peptide-based hydrogelator (Fmoc-FFRRVR) based on N-fluorenylmethoxycarbonyl-diphenylalanine (Fmoc-FF) through an approach to improve its hydrophilicity. Compared to Fmoc-FF, Fmoc-FFRRVR prefers to form a hydrogel under mild conditions, and the gelation time is only 2 s. Fmoc-FFRRVR self-assembles into organized arrays of β-sheets in nanofibers via π-stacking of Fmoc-FF, which are supported by circular dichroism and fluorescence emission spectroscopy. Rheology results confirm that the hydrogel of Fmoc-FFRRVR is elastic, reversible and injectable. The newly discovered hydrogel not only retains some excellent performances of Fmoc-FF, but also can be used as a drug carrier for biomedical applications.

Dynamic Tannic Acid Hydrogel with Self-Healing and pH Sensitivity for Controlled Release

Dynamic hydrogels constructed with dynamic chemical bonds often have mechanical strength and self-healing properties. In this paper, tannic acid is combined with lysine-containing F127 through Schiff base. A series of FLaT hydrogels cross-linked by hydrogen bonds and dynamic chemical bonds is prepared, and the influence of Schiff base amount on the performance is discussed. The FLaT hydrogel exhibits reversible sol-gel transition, self-healing, injectability, and pH sensitivity. Increasing the amount of Schiff base can improve the strength, stability, and self-healing ability of the hydrogel. Owing to their low cytotoxicity, linear release pattern, and pH-controlled release rate, the FLaT hydrogels show potential use in drug delivery systems for cancer treatment.

Polyethylenimine-dextran-coated magnetic nanoparticles loaded with miR-302b suppress osteosarcoma in vitro and in vivo

Aim: We attempted to synthesize a magnetic gene carrier with poly(ethylenimine), dextran and iron oxide nanoparticles (PDIs) for miR-302b transfection in vitro and in vivo. Materials & methods: The nanoparticles were characterized for hydrodynamic properties, ζ potential and DNA-binding ability, evaluated by transmission electron microscopy. Cellular internalization, magnetofection efficiency and anti-osteosarcoma effects were investigated in osteosarcoma (OS) cells and OS-bearing nude mice. Results: PDIs were successfully prepared and showed mild cytotoxicity. A magnetic field efficiently enabled transport of PDI/pmiR302b to OS cells in OS-bearing nude mice, exerting the anti-osteosarcoma effect of miR-302b at the tumor site. The inhibitory effect of miR-302b on osteosarcoma-bearing nude mice may be attributed to regulation of the Hippo pathway through YOD1. Conclusion: Low-cytotoxic PDIs have potential applications as a magnetic transport carrier for future osteosarcoma treatment.

An injectable dipeptide-fullerene supramolecular hydrogel for photodynamic antibacterial therapy

Photodynamic therapy (PDT) is a promising treatment against multiantibiotic-resistant bacteria with the advantage of a low tendency towards antibiotic resistance. Due to their high PDT efficiencies and superior chemical stabilities, fullerenes have been proposed as effective photosensitizers for the photodynamic inactivation of bacteria. However, the biomedical applications of fullerenes are hindered by their limited aqueous solubility and apparent tendency to undergo aggregation. Herein, we report a hybrid supramolecular hydrogel prepared by the peptide-modulated self-assembly of fullerenes for targeted and sustained photodynamic antibacterial therapy. Aggregation of the fullerene in the hydrogel is largely inhibited through the non-covalent interactions between the peptide and the fullerene. Consequently, the PDT efficiency of the peptide-fullerene hydrogel is highly improved as compared to the untreated fullerene. The incorporation of fullerene profoundly improves the mechanical properties of the hydrogel, making the peptide-fullerene hydrogel a better injectable formulation for biomedical applications. In vitro and in vivo antibacterial results indicate that the peptide-fullerene hydrogels can effectively inhibit multiantibiotic-resistant Staphylococcus aureus and promote wound healing. This study offers a promising paradigm to adapt self-assembling small peptides with integration of multiple functions for biomedical applications.

Metal-Organic Gels of Catechol-Based Ligands with Ni(II) Acetate for Dye Adsorption

Metal organic gels (MOGs) are a class of supramolecular complexes, which have attracted widespread interest because of the coupled advantages of inorganic and organic building blocks. A new compound terminated with catechol was synthesized. This new compound can be used to coordinate with Ni²⁺ to form MOGs. These MOGs show favorable viscoelasticity and wormhole-shaped porous structures, which were confirmed by transmission electron microscope and scanning electronic microscope images. Taking the benefits of porosity into account, the xerogel could serve as an adsorbent to adsorb dye molecules from the aqueous media. The experimental results indicate that xerogels possess good adsorption effect both on anionic and cationic dyes. Exhaustive research has been performed on the adsorption kinetics and isotherms, revealing that the adsorption process accords with the pseudo-second-order model and the Langmuir model.

Multicomponent peptide assemblies

Self-assembled peptide nanostructures have been increasingly exploited as functional materials for applications in biomedicine and energy. The emergent properties of these nanomaterials determine the applications for which they can be exploited. It has recently been appreciated that nanomaterials composed of multicomponent coassembled peptides often display unique emergent properties that have the potential to dramatically expand the functional utility of peptide-based materials. This review presents recent efforts in the development of multicomponent peptide assemblies. The discussion includes multicomponent assemblies derived from short low molecular weight peptides, peptide amphiphiles, coiled coil peptides, collagen, and β-sheet peptides. The design, structure, emergent properties, and applications for these multicomponent assemblies are presented in order to illustrate the potential of these formulations as sophisticated next-generation bio-inspired materials.