Bio-Based Transparent Conductive Film Consisting of Polyethylene Furanoate and Silver Nanowires for Flexible Optoelectronic Devices

Recent advances in the development of green furan ring-containing polymeric materials based on renewable plant biomass

Fossil resources are rapidly depleting, forcing researchers in various fields of chemistry and materials science to switch to the use of renewable sources and the development of corresponding technologies. In this regard, the field of sustainable materials science is experiencing an extraordinary surge of interest in recent times due to the significant advances made in the development of new polymers with desired and controllable properties. This review summarizes important scientific reports in recent times dedicated to the synthesis, construction and computational studies of novel sustainable polymeric materials containing unchanged (pseudo)aromatic furan cores in their structure. Linear polymers for thermoplastics, branched polymers for thermosets and other crosslinked materials are emerging materials to highlight. Various polymer blends and composites based on sustainable polyfurans are also considered as pathways to achieve high-value-added products.

Fire Propagation Behavior of Some Biobased Furanic Compounds with a Focus on the Polymer PEF

Avantium is in the process of building a flagship plant for the production of furandicarboxylic acid (FDCA) and the derived polyester polyethylene furanoate (PEF) using their YXY process. Because of the status of this development of monomer production, next to storage and shipping, polymer production, application development, and polymer recycling, the understanding of the safety aspects of the YXY process is key for a successful deployment of the technology. In this paper, the focus is on fire propagation-related issues for both monomeric furanic compounds and for the polymer PEF and results are compared with relevant reference materials. The current assessment addresses the fire initiation and propagation behavior of FDCA and PEF for the very first time. From the fire safety viewpoint, it can be concluded that of the furanics tested, FDCA has a better safety margin both in terms of a lower thermal and chemical threat, as fires resulting from FDCA are not easily shifting toward underventilated fire scenarios. The obtained results with the PEF polymer are useful in understanding the nature and behavior of PEF under real fire conditions. PEF seems slightly better in terms of the total energy released from the combustion process than the bulk polyester PET. In addition, PEF fires result in lesser CO and soot yields compared to PET, which is proof for a better completeness of combustion.

Flexible Polymer-Organic Solar Cells Based on P3HT:PCBM Bulk Heterojunction Active Layer Constructed under Environmental Conditions

In this study, some crucial parameters were determined of flexible polymer–organic solar cells prepared from an active layer blend of poly(3-hexylthiophene) (P3HT) and the fullerene derivative [6,6]-phenyl-C₆₁-butyric acid methyl ester (PCBM) mixed in 1:1 mass ratio and deposited from chlorobenzene solution by spin-coating on poly(ethylene terephthalate) (PET)/ITO substrates. Additionally, the positive effect of an electron transport layer (ETL) prepared from zinc oxide nanoparticles (ZnO np) on flexible photovoltaic elements’ performance and stability was investigated. Test devices with above normal architecture and silver back electrodes deposed by magnetron sputtering were constructed under environmental conditions. They were characterized by current-voltage (I–V) measurements, quantum efficiency, impedance spectroscopy, surface morphology, and time–degradation experiments. The control over morphology of active layer thin film was achieved by post-deposition thermal treatment at temperatures of 110–120 °C, which led to optimization of device morphology and electrical parameters. The impedance spectroscopy results of flexible photovoltaic elements were fitted using two R||CPE circuits in series. Polymer–organic solar cells prepared on plastic substrates showed comparable current–voltage characteristics and structural properties but need further device stability improvement according to traditionally constructed cells on glass substrates.

Microbial cell factories a new dimension in bio-nanotechnology: exploring the robustness of nature

Bio-based nanotechnology has its existence in biological dimensions e.g. microbial cell factories (bacteria, fungi. algae, yeast, cyanobacteria) plants, and biopolymers. They provide multipurpose biological platforms to supply well-designed materials for diverse nano-biotechnological applications. The "green or bio-based synthesis of nanoparticles (NPs)" has witnessed a research outburst in the past decade. The bio-based synthesis of NPs using microbial cell factories is a benign process and requires mild conditions for the synthesis with end products being less/non-toxic. As a result, its application has extended in multitudinous industries including environment, cosmetics, and pharmaceutical. Thus, the present review summarizes all the significant aspects of nanotechnology and the reason to switch towards the bio-based synthesis of NPs using microbial cell factories. It consists of a detailed description of the bio-based methods employed for the synthesis and classification of NPs. Also, a comprehensive study on the application of bio-based NPs in the various industrial and biotechnological domains has been discussed. The limitation and its solution would help identify the applicability of NPs to "identified and unidentified" sectors.

Mechanical Robust Flexible Single-Component Organic Solar Cells

Owing to the advantages of being lightweight and compatible with surfaces with different deformations, flexible organic solar cells (OSCs) have broad scopes of applications, including wearable electronics and portable devices. Most flexible OSCs focus on the two-component bulk-heterojunction (BHJ) photo-active layers, but they usually suffer from degradation problems both in efficiency and mechanical durability derived from the limited phase stability under mechanical and thermal stress. Whereas, single-component organic solar cells (SCOSCs) based on the double-cable conjugated polymer are supposed to possess excellent mechanical robustness and long-term stability. Here, the first flexible SCOSCs based on a double-cable polymer are fabricated on a transparent silver nanowires (AgNWs) electrode on a plastic foil. Impressively, the obtained flexible SCOSCs exhibited a power conversion efficiency (PCE) of 7.21%. The flexible SCOSCs are further demonstrated to possess superior mechanical robustness (>95% retention after 1000 bending cycles) and storage stability (>97% retention after 430 h in nitrogen atmosphere) compared to several BHJ-type flexible OSCs. The pseudo-free-standing tensile test and morphology investigation are conducted to reveal the distinction in mechanical durability of the single-component polymer film and the BHJ-type films. Besides, ultraflexible SCOSCs are also fabricated, indicating the application prospect and superiority in flexible devices and wearable electronic products.

Highly Transparent, Stretchable, and Conductive Supramolecular Ionogels Integrated with Three-Dimensional Printable, Adhesive, Healable, and Recyclable Character

In this work, we report the easy fabrication of highly transparent (optical transmittance above 93%), stretchable (1500-2500% elongation at break), and conductive (up to 2.25 S m^-1 at 25 °C) supramolecular ionogels that simultaneously integrate with three-dimensional (3D) printable, healable, adhesive, and recyclable character. The supramolecular ionogel is designed using a linear amphiphilic poly(urethane-urea) (PUU) copolymer and ionic liquid (IL) as the elastic scaffold and electrolyte, respectively, via a simple cosolvent method. Intriguingly, the 3D-printed highly conductive (2.25 S m^-1 at 25 °C) supramolecular ionogel structure shows record-high mechanical performance with a breaking tensile strain and stress of 945% and 1.51 MPa, respectively, and is able to lift 3400× or bear 10000× its weight without fracture. Furthermore, both the solution casting and 3D-printed ionogel films show high sensitivity and reliability for sensing a wide range of strains, including various human motions. The results present some new insights into the structural, mechanical, and functional design of novel multifunctional ionogels with distinguished mechanical performance and tractable processability, which will extend them to a wide range of flexible electronic applications, including artificial intelligence, wearable/conformable electronics, human/machine interactions, soft robotics, etc.

New Bio-Based Furanic Materials Effectively Absorb Metals from Water and Exert Antimicrobial Activity

Development of sustainable bio-based materials for removal of toxic contaminants from water is a high priority goal. Novel bio-based binary and ternary copolymers with enhanced ion-exchange, adsorption and antibacterial properties were obtained by using plant biomass-derived diallyl esters of furandicarboxylic acid (FDCA) as crosslinking agents and easily available vinyl monomers. The synthesized copolymer materials showed higher sorption capacities for Ni^II , Co^II and Cu^II compared to the commercial ion-exchange resins, and they maintained their high metal adsorption capacities for over 10 cycles of regeneration. The synthesized copolymer gels containing 1-5 wt % of the crosslinker showed excellent water absorption capacities. The synthesized copolymers with 1 % crosslinker content showed swelling ratios high enough to also act as moisture absorbents. Synthesized copolymers with crosslinker content of 10 wt % performed as contact-active antibacterials by inhibiting the growth of Gram-positive (S. aureus) and Gram-negative bacteria (E. coli, K. pneumonia) in suspension tests.

Thermoresponsive and Conductive Chitosan-Polyurethane Biocompatible Thin Films with Potential Coating Application

Conductive thin films have great potential for application in the biomedical field. Herein, we designed thermoresponsive and conductive thin films with hydrophilicity, strain sensing, and biocompatibility. The crosslinked dense thin films were synthesized and prepared through a Schiff base reaction and ionic interaction from dialdehyde polyurethane, N-carboxyethyl chitosan, and double-bonded chitosan grafted polypyrrole. The thin films were air-dried under room temperature. These thin films showed hydrophilicity and conductivity (above 2.50 mS/cm) as well as responsiveness to the deformation. The tensile break strength (9.72 MPa to 15.07 MPa) and tensile elongation (5.76% to 12.77%) of conductive thin films were enhanced by heating them from 25 °C to 50 °C. In addition, neural stem cells cultured on the conductive thin films showed cell clustering, proliferation, and differentiation. The application of the materials as a conductive surface coating was verified by different coating strategies. The conductive thin films are potential candidates for surface modification and biocompatible polymer coating.

Embedding Silver Nanowires into a Hydroxypropyl Methyl Cellulose Film for Flexible Electrochromic Devices with High Electromechanical Stability

Transparent conductive films (TCFs) based on silver nanowires (AgNWs) are becoming one of the best candidates in realizing flexible optoelectronic devices. The AgNW-based TCF is usually prepared by coating AgNWs on a transparent polymer film; however, the coated AgNWs easily detach from the polymer underneath because of the weak adhesion between them. Herein, a network of AgNWs is embedded in the transparent hydroxypropyl methyl cellulose film, which has a strong adhesion with the AgNWs. The obtained TCF shows high optical transmittance (>85%), low roughness (rms = 4.8 ± 0.5 nm), and low haze (<0.2%). More importantly, owing to the embedding structure and strong adhesion, this TCF also shows excellent electromechanical stability, which is superior to the reported ones. Employing this TCF in a flexible electrochromic device, the obtained device exhibits excellent cyclic electromechanical stability and high coloring efficiency. Our work demonstrates a promising TCF with superior electromechanical stability for future applications in flexible optoelectronics.

Mechanical and Functional Properties of Novel Biobased Poly(decylene-2,5-furanoate)/Carbon Nanotubes Nanocomposite Films

The present work investigates the microstructural, thermo-mechanical, and electrical properties of a promising, but still not thoroughly studied, biobased polymer, i.e., poly(decylene furanoate) (PDeF), and its performance when multi-walled carbon nanotubes (CNTs) are added. After sample preparation by solution mixing and film casting, the microstructural investigation evidences that the fracture surface becomes smoother and more homogeneous with a small fraction of CNTs, and that the production process is suitable to achieve good disentanglement and dispersion of CNTs within the matrix, although some aggregates are still observable. CNTs act as nucleating agents for PDeF crystals, as evidenced by differential scanning calorimetry, as the crystallinity degree increases from 43.2% of neat PDeF to 55.0% with a CNT content of 2 phr, while the crystallization temperature increases from 68.4 °C of PDeF to 91.7 °C of PDeF-CNT-2. A similar trend in crystallinity is confirmed by X-ray diffraction, after detailed Rietveld analysis with a three-phase model. CNTs also remarkably improve the mechanical performance of the bioderived polymer, as the elastic modulus increases up to 123% and the stress at break up to 131%. The strain at break also increases by +71% when a small amount of 0.25 phr of CNTs are added, which is probably the consequence of a more homogeneous microstructure. The long-term mechanical performance is also improved upon CNT addition, as the creep compliance decreases considerably, which was observed for both the elastic and the viscoelastic component. Finally, the films become electrically dissipative for a CNT content of 1 phr and conductive for a CNT amount of 2 phr. This study contributes to highlight the properties of bioderived furan-based polymer PDeF and evidences the potential of CNTs as a promising nanofiller for this matrix.

A Perspective on PEF Synthesis, Properties, and End-Life

This critical review considers the extensive research and development dedicated, in the last years, to a single polymer, the poly(ethylene 2,5-furandicarboxylate), usually simply referred to as PEF. PEF importance stems from the fact that it is based on renewable resources, typically prepared from C6 sugars present in biomass feedstocks, for its resemblance to the high-performance poly(ethylene terephthalate) (PET) and in terms of barrier properties even outperforming PET. For the first time synthesis, properties, and end-life targeting—a more sustainable PEF—are critically reviewed. The emphasis is placed on how synthetic roots to PEF evolved toward the development of greener processes based on ring open polymerization, enzymatic synthesis, or the use of ionic liquids; together with a broader perspective on PEF end-life, highlighting recycling and (bio)degradation solutions.

A Review: Preparation, Performance, and Applications of Silicon Oxynitride Film

Silicon oxynitride (SiN_xO_y) is a highly promising functional material for its luminescence performance and tunable refractive index, which has wide applications in optical devices, non-volatile memory, barrier layer, and scratch-resistant coatings. This review presents recent developments, and discusses the preparation methods, performance, and applications of SiN_xO_y film. In particular, the preparation of SiN_xO_y film by chemical vapor deposition, physical vapor deposition, and oxynitridation is elaborated in details.