Large field-of-view real-time MRI with a 32-channel system

Radial magnetic resonance imaging (MRI) using a rotating radiofrequency (RF) coil at 9.4 T

The rotating radiofrequency coil (RRFC) has been developed recently as an alternative approach to multi-channel phased-array coils. The single-element RRFC avoids inter-channel coupling and allows a larger coil element with better B₁ field penetration when compared with an array counterpart. However, dedicated image reconstruction algorithms require accurate estimation of temporally varying coil sensitivities to remove artefacts caused by coil rotation. Various methods have been developed to estimate unknown sensitivity profiles from a few experimentally measured sensitivity maps, but these methods become problematic when the RRFC is used as a transceiver coil. In this work, a novel and practical radial encoding method is introduced for the RRFC to facilitate image reconstruction without the measurement or estimation of rotation-dependent sensitivity profiles. Theoretical analyses suggest that the rotation-dependent sensitivities of the RRFC can be used to create a uniform profile with careful choice of sampling positions and imaging parameters. To test this new imaging method, dedicated electronics were designed and built to control the RRFC speed and hence positions in synchrony with imaging parameters. High-quality phantom and animal images acquired on a 9.4 T pre-clinical scanner demonstrate the feasibility and potential of this new RRFC method.

Improved receiver arrays and optimized parallel imaging accelerations applied to time-resolved 3D fluoroscopically tracked peripheral runoff CE-MRA

OBJECTIVES

Three-station stepping-table time-resolved 3D contrast-enhanced magnetic resonance angiography has conflicting demands in the need to limit acquisition time in proximal stations to match the speed of the advancing contrast bolus and in the distal-most station to avoid venous contamination while still providing clinically useful spatial resolution. This work describes improved receiver coil arrays which address this issue by allowing increased acceleration factors, providing increased spatial resolution per unit time.

MATERIALS AND METHODS

Receiver coil arrays were constructed for each station (pelvis, thigh, calf) and then integrated into a 48-element array for three-station peripheral CE-MRA. Coil element sizes and array configurations for these three stations were designed to improve SENSE-type parallel imaging taking advantage of an increase in coil count for all stations versus the previous 32 channel capability. At each station either acceleration apportionment or optimal CAIPIRINHA selection was used to choose the optimum acceleration parameters for each subject. Results were evaluated in both single- and multi-station studies.

RESULTS

Single-station studies showed that SENSE acceleration in the thigh station could be readily increased from R=8 to R=10, allowing reduction of the frame time from 2.5 to 2.1 s to better image the typically rapidly advancing bolus at this station. Similarly, the improved coil array for the calf station permitted acceleration increase from R=8 to R=12, providing a 4.0 vs. 5.2 s frame time. Results in three-station studies suggest an improved ability to track the contrast bolus in peripheral CE-MRA.

CONCLUSIONS

Modified receiver coil arrays and individualized parameter optimization have been used to provide improved acceleration at all stations in multi-station peripheral CE-MRA and provide high spatial resolution with frame times as short as 2.1 s.

Highly accelerated acquisition and homogeneous image reconstruction with rotating RF coil array at 7T-A phantom based study

Parallel imaging (PI) is widely used for imaging acceleration by means of coil spatial sensitivities associated with phased array coils (PACs). By employing a time-division multiplexing technique, a single-channel rotating radiofrequency coil (RRFC) provides an alternative method to reduce scan time. Strategically combining these two concepts could provide enhanced acceleration and efficiency. In this work, the imaging acceleration ability and homogeneous image reconstruction strategy of 4-element rotating radiofrequency coil array (RRFCA) was numerically investigated and experimental validated at 7T with a homogeneous phantom. Each coil of RRFCA was capable of acquiring a large number of sensitivity profiles, leading to a better acceleration performance illustrated by the improved geometry-maps that have lower maximum values and more uniform distributions compared to 4- and 8-element stationary arrays. A reconstruction algorithm, rotating SENSitivity Encoding (rotating SENSE), was proposed to provide image reconstruction. Additionally, by optimally choosing the angular sampling positions and transmit profiles under the rotating scheme, phantom images could be faithfully reconstructed. The results indicate that, the proposed technique is able to provide homogeneous reconstructions with overall higher and more uniform signal-to-noise ratio (SNR) distributions at high reduction factors. It is hoped that, by employing the high imaging acceleration and homogeneous imaging reconstruction ability of RRFCA, the proposed method will facilitate human imaging for ultra high field MRI.

Advances in pediatric body MRI

MRI offers an alternative to CT, and thus is central to an ALARA strategy. However, long exam times, limited magnet availability, and motion artifacts are barriers to expanded use of MRI. This article reviews developments in pediatric body MRI that might reduce these barriers: high field systems, acceleration, navigation and newer contrast agents.

Potential impact of a 32-channel receiving head coil technology on the results of a functional MRI paradigm

PURPOSE

The authors investigated the potential of a 32-channel (32ch) receiving head coil for functional magnetic resonance imaging (fMRI) compared to a standard eight-channel (8ch) coil using a motor task.

MATERIAL AND METHODS

Brain activation was analyzed in 14 healthy right-handed subjects performing finger tapping with the right index finger (block design) during two experimental sessions, one with the 8ch and one with the 32ch coil (applied in a pseudorandomized order). Additionally, a phantom study was performed to compare signal-to-noise ratios (SNRs) of both coils.

RESULTS

During both fMRI sessions, analysis of motor conditions resulted in an activation of the left "hand knob" (precentral gyrus). Application of the 32ch coil obtained additional activation clusters in the right cerebellum, left superior frontal gyrus (SMA), left supramarginal gyrus, and left postcentral gyrus. The phantom study revealed a significantly higher SNR for the 32ch coil compared to the 8ch coil in superficial cortical areas located near the surface of the brain.

CONCLUSION

The 32ch technology has a potential impact on fMRI studies, especially in paradigms that result in activation of cortical areas located near the surface of the brain.

State-of-the-art in pediatric body and musculoskeletal magnetic resonance imaging

Pediatric body and musculoskeletal MRI has seen tremendous advances over the past few years. These advances have enabled high-quality imaging in even the smallest children and expanded the range of clinical problems amenable to MRI. In this review, we highlight some advances: transition to 3 Tesla, parallel imaging, motion compensation, and new contrast agents. Given the increasing saliency of concerns regarding ionizing radiation from computed tomography, these advances could not be more welcome.

Flexible, phase-matched, linear receive arrays for high-field MRI in monkeys

High signal-to-noise ratios (SNR) are essential for high-resolution anatomical and functional MRI. Phased arrays are advantageous for this but have the drawback that they often have inflexible and bulky configurations. Particularly in experiments where functional MRI is combined with simultaneous electrophysiology, space constraints can be prohibitive. To this end we developed a highly flexible multiple receive element phased array for use on anesthetized monkeys. The elements are interchangeable and different sizes and combinations of coil elements can be used, for instance, combinations of single and overlapped elements. The preamplifiers including control electronics are detachable and can serve a variety of prefabricated and phase matched arrays of different configurations, allowing the elements to always be placed in close proximity to the area of interest. Optimizing performance of the individual elements ensured high SNR at the cortical surface as well as in deeper laying structures. Performance of a variety of arrangements of gapped linear arrays was evaluated at 4.7 and 7T in high-resolution anatomical and functional MRI.

96-Channel receive-only head coil for 3 Tesla: design optimization and evaluation

The benefits and challenges of highly parallel array coils for head imaging were investigated through the development of a 3T receive-only phased-array head coil with 96 receive elements constructed on a close-fitting helmet-shaped former. We evaluated several designs for the coil elements and matching circuitry, with particular attention to sources of signal-to-noise ratio (SNR) loss, including various sources of coil loading and coupling between the array elements. The SNR and noise amplification (g-factor) in accelerated imaging were quantitatively evaluated in phantom and human imaging and compared to a 32-channel array built on an identical helmet-shaped former and to a larger commercial 12-channel head coil. The 96-channel coil provided substantial SNR gains in the distal cortex compared to the 12- and 32-channel coils. The central SNR for the 96-channel coil was similar to the 32-channel coil for optimum SNR combination and 20% lower for root-sum-of-squares combination. There was a significant reduction in the maximum g-factor for 96 channels compared to 32; for example, the 96-channel maximum g-factor was 65% of the 32-channel value for acceleration rate 4. The performance of the array is demonstrated in highly accelerated brain images.

Single echo acquisition MRI using RF encoding

Encoding of spatial information in magnetic resonance imaging is conventionally accomplished by using magnetic field gradients. During gradient encoding, the position in k-space is determined by a time-integral of the gradient field, resulting in a limitation in imaging speed due to either gradient power or secondary effects such as peripheral nerve stimulation. Partial encoding of spatial information through the sensitivity patterns of an array of coils, known as parallel imaging, is widely used to accelerate the imaging, and is complementary to gradient encoding. This paper describes the one-dimensional limit of parallel imaging in which all spatial localization in one dimension is performed through encoding by the radiofrequency (RF) coil. Using a one-dimensional array of long and narrow parallel elements to localize the image information in one direction, an entire image is obtained from a single line of k-space, avoiding rapid or repeated manipulation of gradients. The technique, called single echo acquisition (SEA) imaging, is described, along with the need for a phase compensation gradient pulse to counteract the phase variation contained in the RF coil pattern which would otherwise cause signal cancellation in each imaging voxel. Image reconstruction and resolution enhancement methods compatible with the speed of the technique are discussed. MR movies at frame rates of 125 frames per second are demonstrated, illustrating the ability to monitor the evolution of transverse magnetization to steady state during an MR experiment as well as demonstrating the ability to image rapid motion. Because this technique, like all RF encoding approaches, relies on the inherent spatially varying pattern of the coil and is not a time-integral, it should enable new applications for MRI that were previously inaccessible due to speed constraints, and should be of interest as an approach to extending the limits of detection in MR imaging.

128-channel body MRI with a flexible high-density receiver-coil array

PURPOSE

To determine whether the promise of high-density many-coil MRI receiver arrays for enabling highly accelerated parallel imaging can be realized in practice.

MATERIALS AND METHODS

A 128-channel body receiver-coil array and custom MRI system were developed. The array comprises two clamshells containing 64 coils each, with the posterior array built to maximize signal-to-noise ratio (SNR) and the anterior array design incorporating considerations of weight and flexibility as well. Phantom imaging and human body imaging were performed using a variety of reduction factors and 2D and 3D pulse sequences.

RESULTS

The ratio of SNR relative to a 32-element array of similar footprint was 1.03 in the center of an elliptical loading phantom and 1.7 on average in the outer regions. Maximum g-factors dropped from 5.5 (for 32 channels) to 2.0 (for 128 channels) for 4x4 acceleration and from 25 to 3.3 for 5x5 acceleration. Residual aliasing artifacts for a right/left (R/L) reduction factor of 8 in human body imaging were significantly reduced relative to the 32-channel array.

CONCLUSION

MRI with a large number of receiver channels enables significantly higher acceleration factors for parallel imaging and improved SNR, provided losses from the coils and electronics are kept negligible.

Advances in pediatric MR imaging

This article describes the considerable technical achievements that have been made in MR imaging in the evaluation of pediatric patients. The latest techniques in improving signal intensity, resolution, and speed are discussed. The multitude of new options for pediatric MR imaging are illustrated, including higher field strength imaging, multi-channel coil technology coupled with parallel imaging, and new pulse sequence designs. Several future directions in the field of pediatric body and musculoskeletal imaging also are highlighted.

Advances in 4D medical imaging and 4D radiation therapy

This paper reviews recent advances in 4D medical imaging (4DMI) and 4D radiation therapy (4DRT), which study, characterize, and minimize patient motion during the processes of imaging and radiotherapy. Patient motion is inevitably present in these processes, producing artifacts and uncertainties in target (lesion) identification, delineation, and localization. 4DMI includes time-resolved volumetric CT, MRI, PET, PET/CT, SPECT, and US imaging. To enhance the performance of these volumetric imaging techniques, parallel multi-detector array has been employed for acquiring image projections and the volumetric image reconstruction has been advanced from the 2D to the 3D tomography paradigm. The time information required for motion characterization in 4D imaging can be obtained either prospectively or retrospectively using respiratory gating or motion tracking techniques. The former acquires snapshot projections for reconstructing a motion-free image. The latter acquires image projections continuously with an associated timestamp indicating respiratory phases using external surrogates and sorts these projections into bins that represent different respiratory phases prior to reconstructing the cyclical series of 3D images. These methodologies generally work for all imaging modalities with variations in detailed implementation. In 4D CT imaging, both multi-slice CT (MSCT) and cone-beam CT (CBCT) are applicable in 4D imaging. In 4D MR imaging, parallel imaging with multi-coil-detectors has made 4D volumetric MRI possible. In 4D PET and SPECT, rigid and non-rigid motions can be corrected with aid of rigid and deformable registration, respectively, without suffering from low statistics due to signal binning. In 4D PET/CT and SPECT/CT, a single set of 4D images can be utilized for motion-free image creation, intrinsic registration, and attenuation correction. In 4D US, volumetric ultrasonography can be employed to monitor fetal heart beating with relatively high temporal resolution. 4DRT aims to track and compensate for target motion during radiation treatment, minimizing normal tissue injury, especially critical structures adjacent to the target, and/or maximizing radiation dose to the target. 4DRT requires 4DMI, 4D radiation treatment planning (4D RTP), and 4D radiation treatment delivery (4D RTD). Many concepts in 4DRT are borrowed, adapted and extended from existing image-guided radiation therapy (IGRT) and adaptive radiation therapy (ART). The advantage of 4DRT is its promise of sparing additional normal tissue by synchronizing the radiation beam with the moving target in real-time. 4DRT can be implemented differently depending upon how the time information is incorporated and utilized. In an ideal situation, the motion adaptive approach guided by 4D imaging should be applied to both RTP and RTD. However, until new automatic planning and motion feedback tools are developed for 4DRT, clinical implementation of ideal 4DRT will meet with limited success. However, simplified forms of 4DRT have been implemented with minor modifications of existing planning and delivery systems. The most common approach is the use of gating techniques in both imaging and treatment, so that the planned and treated target localizations are identical. In 4D planning, the use of a single planning CT image, which is representative of the statistical respiratory mean, seems preferable. In 4D delivery, on-site CBCT imaging or 3D US localization imaging for patient setup and internal fiducial markers for target motion tracking can significantly reduce the uncertainty in treatment delivery, providing improved normal tissue sparing. Most of the work on 4DRT can be regarded as a proof-of-principle and 4DRT is still in its early stage of development.

Highly accelerated cardiovascular MR imaging using many channel technology: concepts and clinical applications

Cardiovascular magnetic resonance imaging (CVMRI) is of proven clinical value in the non-invasive imaging of cardiovascular diseases. CVMRI requires rapid image acquisition, but acquisition speed is fundamentally limited in conventional MRI. Parallel imaging provides a means for increasing acquisition speed and efficiency. However, signal-to-noise (SNR) limitations and the limited number of receiver channels available on most MR systems have in the past imposed practical constraints, which dictated the use of moderate accelerations in CVMRI. High levels of acceleration, which were unattainable previously, have become possible with many-receiver MR systems and many-element, cardiac-optimized RF-coil arrays. The resulting imaging speed improvements can be exploited in a number of ways, ranging from enhancement of spatial and temporal resolution to efficient whole heart coverage to streamlining of CVMRI work flow. In this review, examples of these strategies are provided, following an outline of the fundamentals of the highly accelerated imaging approaches employed in CVMRI. Topics discussed include basic principles of parallel imaging; key requirements for MR systems and RF-coil design; practical considerations of SNR management, supported by multi-dimensional accelerations, 3D noise averaging and high field imaging; highly accelerated clinical state-of-the art cardiovascular imaging applications spanning the range from SNR-rich to SNR-limited; and current trends and future directions.

Whole-body contrast-enhanced magnetic resonance angiography: new advances at 3.0 T

During the past decade, technical improvements and numerous advances in scanner hardware and software have significantly improved image quality, speed, and reliability of 3-dimensional (3-D) contrast-enhanced magnetic resonance angiography (CE-MRA). The accuracy of CE-MRA is now comparable with that of computed tomography angiography or even conventional catheter angiography. Peripheral vascular disease (PVD) accounts for 50,000 to 60,000 cases of percutaneous transluminal angioplasty and for about 100,000 cases of amputation annually in the United States. Proper treatment of the arterial disease requires a comprehensive assessment of the underlying vascular morphology because it is crucial to localize and gauge the severity of arterial lesions for further therapeutic decision making.Contrast-enhanced magnetic resonance angiography has been widely implemented in noninvasive evaluation of PVD with high diagnostic accuracy. The lack of ionizing radiation and the use of contrast agent with relatively small potential nephrotoxicity in population of PVD with high prevalence of renal impairment are the appealing features for broad acceptance of CE-MRA in initial diagnosis and repeated follow-up studies of patients with PVD. The minimum anatomical coverage for evaluation of PVD comprises the aortic bifurcation to the ankles; however, because of the systemic nature of atherosclerosis hypertension, renal or cerebrovascular disease frequently coexist. Thus, many clinicians regard evaluation of the whole-body arterial vasculature as desirable.

Parallel magnetic resonance imaging

Parallel MRI started with the introduction of coil arrays in improving radiofrequency (RF) acquisition (what is called parallel imaging) and continued with an analogous development for RF transmission (parallel transmission). Based on differences in the spatial sensitivity distributions of the involved array elements, both techniques try to shorten the respective k-space trajectory. Parallel imaging refers to the acquisition of k-space data, whereas parallel transmission is dealing with the deposition of RF energy packages in the excitation k-space. However, parallel transmission is not simply the reciprocal of parallel imaging. The main goal of parallel imaging is the shortening of the acquisition time. The main goal of parallel transmission is the shortening of the pulse duration of spatially selective RF pulses. The present article describes the basic concept, the state of the art, and the similarities and differences of both technologies.

Parallel magnetic resonance imaging

Parallel imaging has been the single biggest innovation in magnetic resonance imaging in the last decade. The use of multiple receiver coils to augment the time consuming Fourier encoding has reduced acquisition times significantly. This increase in speed comes at a time when other approaches to acquisition time reduction were reaching engineering and human limits. A brief summary of spatial encoding in MRI is followed by an introduction to the problem parallel imaging is designed to solve. There are a large number of parallel reconstruction algorithms; this article reviews a cross-section, SENSE, SMASH, g-SMASH and GRAPPA, selected to demonstrate the different approaches. Theoretical (the g-factor) and practical (coil design) limits to acquisition speed are reviewed. The practical implementation of parallel imaging is also discussed, in particular coil calibration. How to recognize potential failure modes and their associated artefacts are shown. Well-established applications including angiography, cardiac imaging and applications using echo planar imaging are reviewed and we discuss what makes a good application for parallel imaging. Finally, active research areas where parallel imaging is being used to improve data quality by repairing artefacted images are also reviewed.

Compatibility of interventional x-ray and magnetic resonance imaging: feasibility of a closed bore XMR (CBXMR) system

A next-generation interventional guidance system is proposed that will enable intraprocedural access to both x-ray and magnetic resonance imaging (MRI) modalities. This closed bore XMR (CBXMR) system is comprised of a conventional radiographic rotating anode x-ray tube and a direct conversion flat panel detector on a rotating gantry positioned adjacent to the bore of a 1.5 T MRI. To assess the feasibility of such a system, we have investigated the degree of compatibility between the x-ray components and the MRI. For /-->B(ext)/ < 200 G the effect on the radiographic tube motor was negligible regardless of the orientation of -->B(ext) with respect to the motor axis of rotation--the frequency of anode rotation remained within 6% of the 3400 rpm frequency measured at 0 G. For /-->B(ext)/ >2400 G the anode slowed down to below 2400 rpm at all orientations. At intermediate B(ext), the frequency of rotation varied between 2400 and 3200 rpm, showing a strong dependence on orientation, with -->B(ext) perpendicular to the tube axis having a much stronger effect on the rotation frequency than -->B(ext) parallel to the tube axis. In contrast to the effect of -->B(ext) on the induction motor, parallel -->B(ext) had a stronger detrimental effect on the cathode-anode electron beam, whose path was at 16 degrees to the tube axis, than the perpendicular -->B(ext). Parallel -->B(ext) of several hundred Gauss had a defocusing effect on the x-ray focal spot. -->B(ext) perpendicular to the electron beam shifted the beam without significant defocusing. We have determined that the direct conversion flat panel detector (FPD) technology is not intrinsically sensitive to -->B(ext), and that the modifications required to make the proposed FPDs MRI compatible are minimal. The homogeneity of the MRI signal in the normal field of view was not significantly degraded by the presence of these x-ray components in the vicinity of the MRI bore entrance.

32-element receiver-coil array for cardiac imaging

A lightweight 32-element MRI receiver-coil array was designed and built for cardiac imaging. It comprises an anterior array of 21 copper rings (75 mm diameter) and a posterior array of 11 rings (107 mm diameter) that are arranged in hexagonal lattices so as to decouple nearest neighbors, and curved around the left side of the torso. Imaging experiments on phantoms and human volunteers show that it yields superior performance relative to an eight-element cardiac array as well as a 32-element whole-torso array for both traditional nonaccelerated cardiac imaging and 3D parallel imaging with acceleration factors as high as 16.

MRA of abdominal vessels: technical advances

Magnetic resonance angiography (MRA) in general and MRA of the abdominal vessels in particular have undergone substantial improvements in the past 5 years triggered by the introduction and application of parallel imaging (PI), new sequence techniques such as centric k-space trajectories and undersampling, dedicated contrast agents and clinical high-field scanners. All of these techniques have the potential to improve image quality and resolution or decrease the image acquisition time. However, each of them has its own specific advantages and drawbacks. This review describes the main technical innovations and focuses on the impact these developments may have on abdominal MRA. Special consideration is given to the interaction of these various technical advances. The clinical value of advanced MRA techniques is discussed and illustrated by characteristic cases.

An introduction to coil array design for parallel MRI

The basic principles of radiofrequency coil array design for parallel MRI are described from both theoretical and practical perspectives. Because parallel MRI techniques rely on coil array sensitivities to provide spatial information about the sample, a careful choice of array design is essential. The concepts of coil array spatial encoding are first discussed from four qualitative perspectives. These qualitative descriptions include using coil arrays to emulate spatial harmonics, choosing coils with selective sensitivities to aliased pixels, using coil sensitivities with broad k-space reception profiles, and relying on detector coils to provide a set of generalized projections of the sample. This qualitative discussion is followed by a quantitative analysis of coil arrays, which is discussed in terms of the baseline SNR of the received images as well as the noise amplifications (g-factor) in the reconstructed data. The complications encountered during the experimental evaluation of coil array SNR are discussed, and solutions are proposed. A series of specific array designs are reviewed, with an emphasis on the general design considerations that motivate each approach. Finally, a set of special topics is discussed, which reflect issues that have become important, especially as arrays are being designed for more high-performance applications of parallel MRI. These topics include concerns about the depth penetration of arrays composed of small elements, the use of adaptive arrays for systems with limited receiver channels, the management of inductive coupling between array elements, and special considerations required at high field strengths. The fundamental limits of spatial encoding using coil arrays are discussed, with a primary emphasis on how the determination of these limits impacts the design of optimized arrays. This review is intended to provide insight into how arrays are currently used for parallel MRI and to place into context the new innovations that are to come.

Parallel imaging in cardiovascular MRI: methods and applications

Cardiovascular MR imaging (CVMR) has become a valuable modality for the non-invasive detection and characterization of cardiovascular diseases. CVMR requires high imaging speed and efficiency, which is fundamentally limited in conventional cardiovascular MRI studies. With the introduction of parallel imaging, alternative means for increasing acquisition speed beyond these limits have become available. In parallel imaging some image data are acquired simultaneously, using RF detector coil sensitivities to encode simultaneous spatial information that complements the information gleaned from sequential application of magnetic field gradients. The resulting improvements in imaging speed can be used in various ways, including shortening long examinations, improving spatial resolution and/or anatomic coverage, improving temporal resolution, enhancing image quality, overcoming physiological constraints, detecting and correcting for physiologic motion, and streamlining work flow. Examples of each of these strategies will be provided in this review. First, basic principles and key concepts of parallel MR are described. Second, practical considerations such as coil array design, coil sensitivity calibrations, customized pulse sequences and tailored imaging parameters are outlined. Next, cardiovascular applications of parallel MR are reviewed, ranging from cardiac anatomical and functional assessment to myocardial perfusion and viability to MR angiography of the coronary arteries and the large vessels. Finally, current trends and future directions in parallel CVMR are considered.

Potential and feasibility of parallel MRI at high field

This survey focuses on the fusion of two major lines of recent progress in MRI methodology: parallel imaging with receiver coil arrays and the transition to high and ultra-high field strength for human applications. As discussed in this paper, combining the two developments has vast potential due to multiple specific synergies. First, parallel acquisition and high field are highly complementary in terms of their individual advantages and downsides. As a consequence, the joint approach generally offers enhanced flexibility in the design of scanning strategies. Second, increasing resonance frequency changes the electrodynamics of the MR signal in such a way that parallel imaging becomes more effective in large objects. The underlying conceptual and theoretical considerations are reviewed in detail. In further sections, technical challenges and practical aspects are discussed. The feasibility of parallel MRI at ultra-high field is illustrated by current results of parallel human MRI at 7 T.

Practical approaches to the evaluation of signal-to-noise ratio performance with parallel imaging: application with cardiac imaging and a 32-channel cardiac coil

In this work, two practical methods for the measurement of signal-to-noise-ratio (SNR) performance in parallel imaging are described. Phantoms and human studies were performed with a 32-channel cardiac coil in the context of ultrafast cardiac CINE imaging at 1.5 T using steady-state free precession (SSFP) and TSENSE. SNR and g-factor phantom measurements using a "multiple acquisition" method were compared to measurements from a "difference method". Excellent agreement was seen between the two methods, and the g-factor shows qualitative agreement with theoretical predictions from the literature. Examples of high temporal (42.6 ms) and spatial (2.1x2.1x8 mm3) resolution cardiac CINE SSFP images acquired from human volunteers using TSENSE are shown for acceleration factors up to 7. Image quality agrees qualitatively with phantom SNR measurements, suggesting an optimum acceleration of 4. With this acceleration, a cardiac function study consisting of 6 image planes (3 short-axis views, 3 long-axis views) was obtained in an 18-heartbeat breath-hold.

A fast spin echo two-point Dixon technique and its combination with sensitivity encoding for efficient T2-weighted imaging

A fast spin echo two-point Dixon (fast 2PD) technique was developed for efficient T2-weighted imaging with uniform water and fat separation. The technique acquires two interleaved fast spin echo images with water and fat in-phase and 180 degrees out-of-phase, respectively, and generates automatically separate water and fat images for each slice. The image reconstruction algorithm uses an improved and robust region-growing scheme for phase correction and achieves consistency in water and fat identification between different slices by exploiting the intrinsic correlation between the complex images from two neighboring slices. To further lower the acquisition time to that of a regular fast spin echo acquisition with a single signal average, we combined the fast 2PD technique with sensitivity encoding (SENSE). Phantom experiments show that the fast 2PD and SENSE are complementary in scan efficiency and signal-to-noise ratio (SNR). In vivo data from scanning of clinical patients demonstrate that T2-weighted imaging with uniform and consistent fat separation, including breath-hold abdominal examinations, can be readily performed with the fast 2PD technique or its combination with SENSE.

Parallel MR Imaging: A User’s Guide

Parallel imaging is a recently developed family of techniques that take advantage of the spatial information inherent in phased-array radiofrequency coils to reduce acquisition times in magnetic resonance imaging. In parallel imaging, the number of sampled k-space lines is reduced, often by a factor of two or greater, thereby significantly shortening the acquisition time. Parallel imaging techniques have only recently become commercially available, and the wide range of clinical applications is just beginning to be explored. The potential clinical applications primarily involve reduction in acquisition time, improved spatial resolution, or a combination of the two. Improvements in image quality can be achieved by reducing the echo train lengths of fast spin-echo and single-shot fast spin-echo sequences. Parallel imaging is particularly attractive for cardiac and vascular applications and will likely prove valuable as 3-T body and cardiovascular imaging becomes part of standard clinical practice. Limitations of parallel imaging include reduced signal-to-noise ratio and reconstruction artifacts. It is important to consider these limitations when deciding when to use these techniques.

Three-dimensional contrast-enhanced MR angiography of the thoraco-abdominal vessels

With the strategies presented in this article,relevant disease involving the thoraco-abdominal vessels can be well depicted by 3D CEMRA. Aneurysms, dissections, occlusions, congenital lesions, and anatomic anomalies are readily assessed. Time-resolved MRA provides supplemental information in shunts, dissections, aneurysms, and AVMs. Velocity-encoded imaging may help fur-ther characterize lesions and may provide useful functional information to grade and monitor the progression of stenotic disease. 3.0T imaging and recent development in multicoil RF technology will further improve the performance of 3D CEMRAin terms of temporal and spatial resolution.

Rapid volumetric MRI using parallel imaging with order-of-magnitude accelerations and a 32-element RF coil array: feasibility and implications

RATIONALE AND OBJECTIVES

Many clinical applications of Magnetic Resonance Imaging are constrained by basic limits on imaging speed. Parallel MRI relaxes these limits by using the sensitivity patterns of arrays of radiofrequency receiver coils to encode spatial information in a manner complementary to traditional encoding with magnetic field gradients. Until now, parallel MRI has been used to achieve modest improvements in imaging speed; order-of-magnitude improvements have been elusive given fundamental losses in signal-to-noise ratio. The goal of this work was to demonstrate that, with appropriate hardware and careful SNR management, rapid volumetric imaging at high accelerations is in fact feasible.

MATERIALS AND METHODS

Contrast-enhanced MRI with an axial 3D spoiled gradient echo imaging sequence was performed in healthy adult subjects using a 32-element RF coil array and a prototype 32-channel MR imaging system. Large imaging volumes were prescribed, in place of traditional limited slabs targeted only to suspect regions.

RESULTS

As much as 16-fold net accelerations of imaging were achieved repeatably using this approach. The use of large 3D volumes allowed comprehensive anatomical coverage at clinically useful spatial and/or temporal resolution. The need for careful, time-consuming, and subject-specific scan prescription was also eliminated.

CONCLUSION

The highly parallel imaging approach presented here allows previously inaccessible volumetric coverage for time-sensitive MRI examinations such as contrast-enhanced MRA, and simultaneously provides a substantially simplified imaging paradigm. The resulting capability for rapid volumetric imaging promises to combine the strengths of MRI with some of the advantages of alternative imaging modalities such as multidetector CT.

Three-dimensional reconstruction of limited-view projections for contrast-enhanced magnetic resonance angiography at high temporal and spatial resolution

The feasibility of reconstructing three-dimensional (3D) MRI data sets from limited-view projections is investigated in phantom and in vivo animal studies to improve the temporal resolution of magnetic resonance angiography without sacrificing spatial resolution. Thirty-two pairs of orthogonal biplane projections are acquired in an interleaved manner during the first pass of a contrast agent. The full data set is reconstructed as a priori 3D information. Each pair of projections is then reconstructed into an individual 3D data set based on a correlation analysis with the a priori data set. In this way, time-resolved 3D data sets at 1- to 2-s time intervals are reconstructed with submillimeter spatial resolution. Artifacts are limited if the image is simply structured or sparse and if SNR is sufficient in the projection images. With this technique, both high temporal and spatial resolution can be achieved simultaneously.

Parallel imaging for NMR microscopy at 14.1 Tesla

Parallel imaging techniques using arrays of mutually decoupled coils have become standard on almost all clinical imaging systems. Such techniques also have great potential for high-field magnetic resonance (MR) microscopy, where measurement times are usually long and susceptibility artifacts can be severe. However, it is technically very challenging to design efficient high-frequency phased arrays for small-diameter, vertical-bore magnets, especially since standard decoupling methods, such as impedance mismatched preamplifiers, cannot be easily integrated. A four-coil phased array was constructed for microimaging at 600 MHz, and sensitivity encoding (SENSE) and generalized autocalibrating partially parallel acquisitions (GRAPPA) reconstructions of spin-echo and echo-planar images of the mouse brain were performed to reduce imaging time and susceptibility artifacts, respectively.

Highly parallel volumetric imaging with a 32-element RF coil array

The improvement of MRI speed with parallel acquisition is ultimately an SNR-limited process. To offset acquisition- and reconstruction-related SNR losses, practical parallel imaging at high accelerations should include the use of a many-element array with a high intrinsic signal-to-noise ratio (SNR) and spatial-encoding capability, and an advantageous imaging paradigm. We present a 32-element receive-coil array and a volumetric paradigm that address the SNR challenge at high accelerations by maximally exploiting multidimensional acceleration in conjunction with noise averaging. Geometric details beyond an initial design concept for the array were determined with the guidance of simulations. Imaging with the support of 32-channel data acquisition systems produced in vivo results with up to 16-fold acceleration, including images from rapid abdominal and MRA studies.