Developing a tissue engineered repair material for treatment of stress urinary incontinence and pelvic organ prolapse-which cell source?

Puerarin-Loaded Electrospun Patches with Anti-Inflammatory and Pro-Collagen Synthesis Properties for Pelvic Floor Reconstruction

Pelvic organ prolapse (POP) is one of the most common pelvic floor dysfunction disorders worldwide. The weakening of pelvic connective tissues initiated by excessive collagen degradation is a leading cause of POP. However, the patches currently used in the clinic trigger an unfavorable inflammatory response, which often leads to implantation failure and the inability to simultaneously reverse progressive collagen degradation. Therefore, to overcome the present challenges, a new strategy is applied by introducing puerarin (Pue) into poly(l-lactic acid) (PLLA) using electrospinning technology. PLLA improves the mechanical properties of the patch, while Pue offers intrinsic anti-inflammatory and pro-collagen synthesis effects. The results show that Pue is released from PLLA@Pue in a sustained manner for more than 20 days, with a total release rate exceeding 80%. The PLLA@Pue electrospun patches also show good biocompatibility and low cytotoxicity. The excellent anti-inflammatory and pro-collagen synthesis properties of the PLLA@Pue patch are demonstrated both in vitro in H2O2-stimulated mouse fibroblasts and in vivo in rat abdominal wall muscle defects. Therefore, it is believed that this multifunctional electrospun patch integrating anti-inflammatory and pro-collagen synthesis properties can overcome the limitations of traditional patches and has great prospects for efficient pelvic floor reconstruction.

Stem Cell Application for Stress Urinary Incontinence: From Bench to Bedside

Stress urinary incontinence (SUI) is a common urinary system disease worldwide. Nowadays, medical therapy and surgery can control the symptoms and improve the life quality of patients. However, they might also bring about complications as the standard therapy fails to address the underlying problem of urethral sphincter dysfunction. Recent advances in cell technology have aroused interest in the use of autologous stem cell therapy to restore the ability of urinary control. The present study reviewed several types of stem cells for the treatment of SUI in the experimental and clinical stages.

Platelet-derived growth factor AA-modified electrospun fibers promote tendon healing

Platelet-derived growth factor AA (PDGF-AA) is an important promoter of tissue injury repair and might be a candidate for improving the mechanical properties of repaired tendons. Here, we designed a PDGF-AA-modified poly(lactide-co-glycolide) acid (PLGA) electrospun fibers to promote tendon rehabilitation after injury. In the present study, we grafted PDGF-AA on the surface of PLGA. In structural experiments, we found that the hydrophilicity of PLGA containing PDGF-AA (PLGA-PDGF-AA) increased, but the strength of the material did not change significantly. Moreover, no significant changes in tendon cell proliferation and viability were observed in the PLGA-PDGF-AA treatment compared with the control group. The mouse tendon injury model (n = 9) experiment illustrated that PLGA-PDGF-AA effectively promoted tendon healing, and we confirmed that PLGA-PDGF-AA promoted collagen synthesis and deposition by immunohistochemistry and RT-PCR. Moreover, the mechanical strength of PLGA-PDGF-AA-treated mouse (n = 9) tendon tissue was also higher than that of the PLGA-treated group alone. In conclusion, PLGA-PDGF-AA promoted regeneration after tendon injury and serves as a potential adjuvant material for surgical tendon injury repair.

Tissue-engineered repair material for pelvic floor dysfunction

Pelvic floor dysfunction (PFD) is a highly prevalent urogynecology disorder affecting many women worldwide, with symptoms including pelvic organ prolapse (POP), stress urinary incontinence (SUI), fecal incontinence, and overactive bladder syndrome (OAB). At present, the clinical treatments of PFD are still conservative and symptom-based, including non-surgical treatment and surgery. Surgical repair is an effective and durable treatment for PFD, and synthetic and biological materials can be used to enforce or reinforce the diseased tissue. However, synthetic materials such as polypropylene patches caused a series of complications such as mesh erosion, exposure, pain, and inflammation. The poor mechanical properties and high degradation speed of the biomaterial meshes resulted in poor anatomical reduction effect and limitation to clinical application. Therefore, the current treatment options are suboptimal. Recently, tissue-engineered repair material (TERM) has been applied to repair PFD and could markedly improve the prognosis of POP and SUI repair surgery in animal models. We review the directions and progression of TERM in POP and SUI repair. Adipose-derived stem cells (ADSCs) and endometrial mesenchymal stem cells (eMSCs) appear to be suitable cell types for scaffold seeding and clinical implantation. The multidisciplinary therapy approach to tissue engineering is a promising direction for tissue repair. More and longer follow-up studies are needed before determining cell types and materials for PFD repair.

Evaluating tissue-engineered repair material for pelvic floor dysfunction: a comparison of in vivo response to meshes implanted in rats

INTRODUCTION AND HYPOTHESIS

Achieving better anatomic restoration and decreasing the associated complications are necessary for material repair of pelvic floor dysfunction (PFD). This study was aimed to investigate host response to tissue-engineered repair material (TERM) in rat models by comparing different materials and study the changes in biomechanical properties over time.

METHODS

TERM was constructed by seeding adipose-derived stem cells (ADSCs) on electrospun poly(L-lactide)-trimethylene carbonate-glycolide (PLTG) terpolymers. The TERM, PLTG, porcine small intestine submucosa mesh (SIS), and polypropylene (PP) (n = 6 / group per time point) were implanted in rats for 7, 30, 60, and 90 days. Hematoxylin-eosin and Masson's trichrome staining were used to assess the host response, and mechanical testing was used to evaluate the changes in biomechanical properties.

RESULTS

In vivo imaging showed that the ADSCs were confined to the abdominal wall and did not migrate to other organs or tissues. The TERM was encapsulated by a thicker layer of connective tissue and was associated with less reduced inflammatory scores compared with PLTG and PP over time. The vascularization of the TERM was greater than that with PP and PLTG over time (p < 0.05) and was greater than that with SIS on day 90. The ultimate tensile strain and Young's modulus of the PP group showed the greatest increases, and the TERM group followed on day 90.

CONCLUSIONS

This TERM achieved better host integration in rat models and better biomechanical properties, and it may be an alternative material for PFD.

Tissue engineering to treat pelvic organ prolapse

Pelvic organ prolapse (POP) is a frequent chronic illness, which seriously affects women's living quality. In recent years, tissue engineering has made superior progress in POP treatment, and biological scaffolds have received considerable attention. Nevertheless, pelvic floor reconstruction still faces severe challenges, including the construction of ideal scaffolds, the selection of optimal seed cells, and growth factors. This paper summarizes the recent progress of pelvic floor reconstruction in tissue engineering, and discusses the problems that need to be further considered and solved to provide references for the further development of this field.

Biodegradable materials for surgical management of stress urinary incontinence: A narrative review

Stress urinary incontinence (SUI) was managed with techniques such as colposuspension, autologous fascia sling and urethral bulking agents. The introduction of the mid-urethral polypropylene (PP) sling in the 1990s led to a significant and rapid global change in SUI surgery. The synthetic non-degradable PP sling had superior results to traditional SUI procedures but its use has now declined due to significant complications such as pain and mesh erosion. These complications are attributed to its poor biocompatibility and integration into vaginal tissues. The efficacy of PP was extrapolated from studies on abdominal wall repair and it is now clear that integration of implanted materials in the pelvic floor differs from the abdominal wall. With PP prohibited in some jurisdictions, female patients with SUI have few management options. In the present review we summarise recent advances in SUI surgery and evaluate potential alternatives to PP slings with a particular focus on degradable materials. Allograft and xenograft materials demonstrate good biocompatibility but have yielded suboptimal cure rates. Tissue engineered synthetic degradable materials outperform unmodified synthetic degradable materials in terms of biomechanics and cell support. Synthetic tissue engineered degradable materials show promising results from in vitro studies and future research should focus on animal and human trials in this field.

Next-generation surgical meshes for drug delivery and tissue engineering applications: materials, design and emerging manufacturing technologies

Abstract

Surgical meshes have been employed in the management of a variety of pathological conditions including hernia, pelvic floor dysfunctions, periodontal guided bone regeneration, wound healing and more recently for breast plastic surgery after mastectomy. These common pathologies affect a wide portion of the worldwide population; therefore, an effective and enhanced treatment is crucial to ameliorate patients’ living conditions both from medical and aesthetic points of view. At present, non-absorbable synthetic polymers are the most widely used class of biomaterials for the manufacturing of mesh implants for hernia, pelvic floor dysfunctions and guided bone regeneration, with polypropylene and poly tetrafluoroethylene being the most common. Biological prostheses, such as surgical grafts, have been employed mainly for breast plastic surgery and wound healing applications. Despite the advantages of mesh implants to the treatment of these conditions, there are still many drawbacks, mainly related to the arising of a huge number of post-operative complications, among which infections are the most common. Developing a mesh that could appropriately integrate with the native tissue, promote its healing and constructive remodelling, is the key aim of ongoing research in the area of surgical mesh implants. To this end, the adoption of new biomaterials including absorbable and natural polymers, the use of drugs and advanced manufacturing technologies, such as 3D printing and electrospinning, are under investigation to address the previously mentioned challenges and improve the outcomes of future clinical practice. The aim of this work is to review the key advantages and disadvantages related to the use of surgical meshes, the main issues characterizing each clinical procedure and the future directions in terms of both novel manufacturing technologies and latest regulatory considerations.

Graphic abstract

The Potential of Novel Chitosan-Based Scaffolds in Pelvic Organ Prolapse (POP) Treatment through Tissue Engineering

The growing number of female reproductive system disorders creates a need for novel treatment methods. Tissue engineering brings hope for patients, which enables damaged tissue reconstruction. For this purpose, epithelial cells are cultured on three-dimensional scaffolds. One of the most promising materials is chitosan, which is known for its biocompatibility and biodegradability. The aim of the following study was to verify the potential of chitosan-based biomaterials for pelvic organ prolapse regeneration. The scaffolds were obtained under microwave-assisted conditions in crosslinking reactions, using dicarboxylic acids and aminoacid as crosslinkers, including l-glutamic acid, adipic acid, malonic acid, and levulinic acid. The products were characterized over their physicochemical and biological properties. FT–IR analysis confirmed formation of amide bonds. The scaffolds had a highly porous structure, which was confirmed by SEM analysis. Their porosity was above 90%. The biomaterials had excellent swelling abilities and very good antioxidant properties. The cytotoxicity study was performed on vaginal epithelial VK2/E6E7 and human colon cancer HCT116 cell lines. The results showed that after certain modifications, the proposed scaffolds could be used in pelvic organ prolapse (POP) treatment.

Impact of human umbilical cord-derived stem cells (HUMSCs) on host responses to a synthetic polypropylene mesh for pelvic floor reconstruction in a rat model

In order to evaluate the effects of human umbilical cord-derived stem cells (HUMSCs) on the biocompatibility of and tissue response to a polypropylene (PP) mesh (Gynemesh™ PS) implanted in rat vaginas, HUMSCs were isolated and characterized in vitro and then combined with Gynemesh™ PS to create a tissue-engineered mesh. This tissue-engineered mesh and pure PP mesh were implanted in the submucosae of the posterior vaginal walls of rats. Mesh/tissue complexes were harvested at 1, 4 and 12 weeks after implantation. Histological evaluations including an assessment of the inflammatory reaction, neovascularization and fibrosis around the mesh fibers were performed and real-time quantitative polymerase chain reaction (RT-PCR) was used to analyze the mRNA expression of genes involved in wound healing at the tissue-mesh interface. After being seeded onto the PP mesh scaffold, HUMSCs grew and proliferated well in vitro culture. One week after implantation, the HUMSC-seeded mesh elicited a greater inflammatory response than the pure PP mesh (3.33 ± 0.21 vs. 2.63 ± 0.18, p = 0.026), while 4 and 12 weeks after implantation, the inflammatory response in the HUMSC-seeded mesh was lower than that in the unseeded mesh (p < 0.05). At 12 weeks, the HUMSC-seeded mesh induced a lower expression of matrix metalloproteinase (MMP)-1 and a higher expression of anti-inflammatory cytokine interleukin (IL)-4. HUMSCs may decrease the inflammatory response and improve the biocompatibility of a conventional synthetic mesh and may have the potential to reduce postoperative complications such as mesh exposure or erosion.

Tissue engineering in female pelvic floor reconstruction

Pelvic organ prolapse is a common and frequently occurring disease in middle-aged and elderly women. Mesh implantation is an ideal surgical treatment. The polypropylene mesh commonly used in clinical practice has good mechanical properties, but there are long-term complications. The application of tissue engineering technology in the treatment of pelvic organ prolapse disease can not only meet the mechanical requirements of pelvic floor support, but also be more biocompatible than traditional polypropylene mesh, and can promote tissue repair to a certain extent. In this paper, the progress of tissue engineering was summarized to understand the application of tissue engineering in the treatment of pelvic organ prolapse disease and will help in research.

Regenerative medicine and injection therapies in stress urinary incontinence

Stress urinary incontinence (SUI) is a common and bothersome condition. Anti-incontinence surgery has high cure rates, but concerns about mesh tapes have resulted in the resurgence of surgical procedures that involve increased abdominopelvic dissection and morbidity. Injection therapy with urethral bulking agents or stem cell formulations have been developed as minimally invasive alternatives. Many synthetic and biological bulking agents have been trialled, but several have been discontinued owing to safety concerns. The use of Macroplastique and Contigen has the largest evidence base, but, overall, success rates seem to be similar between the various agents and positive outcomes are poorly sustained for more than 6 months. Furthermore, subjective cure rates, although initially high, also deteriorate over time. The available data consistently demonstrate manifestly poorer outcomes for injection therapies than for surgery. Stem cell treatments are thought to functionally regenerate the urethral sphincter in patients with suspected intrinsic sphincter deficiency. Autologous adipose and muscle-derived stem cells seem to be the intuitive cell source, as they are comparatively abundant, can be harvested and cause minimal donor site morbidity. To date, only a few small clinical studies have been reported and most data are derived from animal models. The success rates of stem cell injection therapies seem to be comparable with those of bulking agents.

Injectable Catalyst-Free Poly(Propylene Fumarate) System Cross-Linked by Strain Promoted Alkyne-Azide Cycloaddition Click Chemistry for Spine Defect Filling

A new PPF-BCN/hyPCL32-N3 injectable system that can be cross-linked by catalyst-free, strain promoted alkyne-azide cycloaddition (SPAAC) click chemistry was developed for tissue engineering applications. The system consisted of two components: PPF-BCN, poly(propylene fumarate) (PPF) functionalized with (1R,8S,9s)-bicyclo[6.1.0]non-4-yn-9-ylmethanol (BCN-OH), and hyPCL32-N3, a hyper-branched 32-arm poly(ε-caprolactone) (PCL) dendrimer functionalized with azide as the cross-linker core. Fast SPAAC click reaction allowed the desired gelation of the system without using any toxic initiator or catalyst. Compared to the conventional injectable formulation, e.g., poly(methyl methacrylate) (PMMA), our PPF-BCN/hyPCL32-N3 (abbreviated as PFCL-Click) injectable system showed enhanced biocompatibility and low heat generation during cross-linking. After reaction, the cross-linked PFCL-Click scaffolds supported excellent proliferation and differentiation of preosteoblast cells on the surface. The PFCL-Click system can be successfully injected into vertebral bodies of rabbit spine and can be monitored by X-ray imaging after incorporating zirconium dioxide (ZrO2) powder. With these unique advantages, this injectable system has promising potential for bone defect repair and other tissue engineering and regenerative medicine applications.

Two-Dimensional Black Phosphorus and Graphene Oxide Nanosheets Synergistically Enhance Cell Proliferation and Osteogenesis on 3D Printed Scaffolds

Two-dimensional (2D) materials have emerged as a new promising research topic for tissue engineering because of their ability to alter the surface properties of tissue scaffolds and thus improve their biocompatibility and cell affinity. Multiple 2D materials, such as graphene and graphene oxide (GO), have been widely reported to enhance cell adhesion and proliferation. Recently, a newly emerged black phosphorus (BP) 2D material has attracted attention in biomedical applications because of its unique mechanical and electrochemical characteristics. In this study, we investigated the synergistic effect of these two types of 2D materials on cell osteogenesis for bone tissue engineering. BP was first wrapped in negatively charged GO nanosheets, which were then adsorbed together onto positively charged poly(propylene fumarate) three-dimensional (3D) scaffolds. The increased surface area provided by GO nanosheets would enhance cell attachment at the initial stage. In addition, slow oxidation of BP nanosheets wrapped within GO layers would generate a continuous release of phosphate, an important osteoblast differentiation facilitator designed to stimulate cell osteogenesis toward the new bone formation. Through the use of 3D confocal imaging, unique interactions between cells and BP nanosheets were observed, including a stretched cell shape and the development of filaments around the BP nanosheets, along with increased cell proliferation when compared with scaffolds incorporating only one of the 2D materials. Furthermore, the biomineralization of 3D scaffolds, as well as cellular osteogenic markers, was all measured and improved on scaffolds with both BP and GO nanosheets. All these results indicate that the incorporation of 2D BP and GO materials could effectively and synergistically stimulate cell proliferation and osteogenesis on 3D tissue scaffolds.

Recent advances in pelvic floor repair

Stress urinary incontinence (SUI) and pelvic organ prolapse (POP) are conditions which result in significant physical, mental and social consequences for women worldwide. The high rates of recurrence reported with primary repair for POP led to the use of synthetic mesh to augment repairs in both primary and secondary cases following failed previous POP repair. The widely reported, unacceptably high rates of complications associated with the use of synthetic, transvaginal mesh in pelvic floor repair have severely limited the treatment options that surgeons can offer. This article summarises the recent advances in pelvic floor repair, such as improved quantification and modelling of the biomechanics of the pelvic floor and the developing technology within the field of tissue engineering for treatment of SUI/POP, including biomaterials and cell-based therapies. Finally, we will discuss the issues surrounding the commercial introduction of synthetic mesh for use within the pelvic floor and what lessons can be learned for the future as well as the current guidance surrounding treatment for SUI/POP.

Tissue engineering for the pelvic floor

PURPOSE OF REVIEW

To set in context the challenge of developing tissue-engineered constructs for use in the female pelvic floor compared with at least 30 years of research progress in tissue engineering for other tissues.

RECENT FINDINGS

The relative lack of information on the mechanical requirements of the pelvic floor in women who have suffered damage to these tissues is a major challenge to designing tissue-engineered materials for use in this area. A few groups are now using autologous cells and biomaterials to develop constructs for repair and regeneration of the pelvic floor. Progress with these has reached early stage evaluation in small animal models. Meanwhile the regulatory challenge of introducing laboratory-expanded cell therapy into the clinic is prompting groups to look at alternatives, such as using lipoaspirate retrieved in theatre as a source of adult stem cells for a number of tissues. In our group, we have begun to look at lipoaspirate for repair of the pelvic floor.

SUMMARY

There is a need for research to harvest the advances made over the last 30 years in developing tissue-engineered constructs for several tissues to now tackle the problems of the weakened pelvic floor. At present, there are relatively few groups engaged in this challenge despite the growing clinical need.

Development of biomimetic trilayer fibrous membranes for guided bone regeneration

in order to build fibrous bone tissue scaffolds for guided bone regeneration and to mimic the trilayer structure and the multifunctional properties of the natural periosteum, we fabricated two fibrous trilayer membranes by conjugate electrospinning technology, in which poly(ε-caprolactone) (PCL) fiber was designed as an outer layer, the mixed fibers of PCL and polyurethane (co-PUPCL) as the interlayer, and degradable polyurethane fibers with or without nano-hydroxyapatite (n-HA) as the inner layer (PUHA or PU). The microstructure and characteristics of the trilayer membranes were evaluated and different monolayer fibers were fabricated as the contrast samples. The tensile strength values of each layer increased from the inner layer to the outer layer in the designed structure, while the step-by-step electrospinning method produced good adhesion of different layers. Furthermore, the degradable properties and hydrophilicity of the layers changed with dissymmetric fibrous structures. Cell proliferation assay and cell morphology observation indicated that the PUHA inner fibrous layer exhibited better cell attachment and proliferation than PU. In addition, the osteogenicity of the PUHA fibrous layer has been attested through protein expression by the differentiation of rat mesenchymal stem cells (rMSCs) into the osteogenic lineage. Cell infiltration testing on the two sides of the trilayer membranes in vitro and in vivo showed that the inner layer had good cellular penetration deep into the scaffolds, whereas the cells were barred by the outer layer. We have developed a trilayer structured membrane with different polymer fibers to replicate the natural periosteum by improving functional outcomes, which is a promising fibrous scaffold for clinical use in the repair of destroyed bone.

Effect of Optimized Concentrations of Basic Fibroblast Growth Factor and Epidermal Growth Factor on Proliferation of Fibroblasts and Expression of Collagen: Related to Pelvic Floor Tissue Regeneration

Background:

Fibroblasts were the main seed cells in the studies of tissue engineering of the pelvic floor ligament. Basic fibroblast growth factor (bFGF) and epidermal growth factor (EGF) were widely studied but at various concentrations. This study aimed to optimize the concentrations of combined bFGF and EGF by evaluating their effects on proliferation and collagen secretion of fibroblasts.

Methods:

Fibroblasts were differentiated from rat adipose mesenchymal stem cells (ADSCs). Flow cytometry and immunohistochemistry were used for cell identification. The growth factors were applied at concentrations of 0, 1, 10, and 100 ng/ml as three groups: (1) bFGF alone, (2) EGF alone, and (3) bFGF mixed with EGF. Cell proliferation was evaluated by Cell Counting Kit-8 assays. Expression of Type I and III collagen (Col-I and Col-III) mRNAs was evaluated by real-time quantitative reverse transcription-polymerase chain reaction. Statistical analysis was performed with SPSS software and GraphPad Prism using one-way analysis of variance and multiple t-test.

Results:

ADSCs were successfully isolated from rat adipose tissue as identified by expression of typical surface markers CD29, CD44, CD90, and CD45 in flow cytometry. Fibroblasts induced from ADSC, compared with ADSCs, were with higher mRNA expression levels of Col I and Col III (F = 1.29, P = 0.0390). bFGF, EGF, and the mixture of bFGF with EGF can enhanced fibroblasts proliferation, and the concentration of 10 ng/ml of the mixture of bFGF with EGF displayed most effectively (all P < 0.05). The expression levels of Col-I and Col-III mRNAs in fibroblasts displayed significant increases in the 10 ng/ml bFGF combined with EGF group (all P < 0.05).

Conclusions:

The optimal concentration of both bFGF and EGF to promote cell proliferation and collagen expression in fibroblasts was 10 ng/ml at which fibroblasts grew faster and secreted more Type I and III collagens into the extracellular matrix, which might contribute to the stability of the pelvic floor microenvironment.

Comparing different tissue-engineered repair materials for the treatment of pelvic organ prolapse and urinary incontinence: which material is better?

INTRODUCTION AND HYPOTHESIS

Synthetic non-absorbable meshes are widely used to augment surgical repair of pelvic organ prolapse (POP) and stress urinary incontinence (SUI), but these meshes are associated with serious complications. This study compares the attachment and extracellular matrix (ECM) production of adipose-derived stem cells (ADSCs) on different biodegradable nanomaterials to develop tissue engineered repair materials.

METHODS

Rat ADSCs were isolated and cultured on electrospun poly-L-lactic acid (PLA) and electrospun poly(L-lactide)-trimethylene carbonate-gycolide (PLTG) terpolymers for 1 and 2 weeks. Samples were tested for cell proliferation (cell counting kit-8), microstructure, and morphology (scanning electron microscopy), production of ECM components (immunostaining for collagen I, collagen III, and elastin) and biomechanical properties (uniaxial tensile methods).

RESULTS

The ADSCs showed good attachment and proliferation on both PLA and PLTG scaffolds. The production of collagen I and collagen III on both scaffolds was greater at 14 days than at 7 days and was greater on PLTG scaffolds than on PLA scaffolds, but these differences were not significant. The addition of ADSCs onto scaffolds led to a significant increase in the biomechanical properties of both PLA and PLTG scaffolds compared with unseeded scaffolds.

CONCLUSION

These data support the use of both PLA and PLTG as tissue-engineered repair materials for POP or SUI.

Oestradiol-releasing Biodegradable Mesh Stimulates Collagen Production and Angiogenesis: An Approach to Improving Biomaterial Integration in Pelvic Floor Repair

BACKGROUND

Polypropylene meshes cause severe complications in some patients. Materials that are biomechanically compatible and can better integrate into host tissues are urgently needed.

OBJECTIVE

To design an oestradiol-releasing electrospun poly-l-lactic acid (PLA) mesh and evaluate its ability to stimulate new extracellular matrix and new blood vessel formation.

DESIGN, SETTING, AND PARTICIPANTS

Human adipose derived mesenchymal cells (ADMSC) were isolated from fat. PLA meshes with micro- to nano-sized fibres containing 1%, 5%, and 10% oestradiol were constructed and used for in vitro and in vivo experiments.

INTERVENTION

The angiogenic potential of the fibrous meshes was evaluated using an in vivo chorioallantoic membrane and an in vitro chick aortic arch assays.

OUTCOME MEASUREMENTS AND STATISTICAL ANALYSIS

Oestradiol release was measured fluorometrically. The effect of fibrous meshes on proliferation and extracellular matrix (ECM) production of ADMSC was assessed using immunohistology. Mechanical properties were tested using a tensiometer.

RESULTS AND LIMITATIONS

The ultrastructure of the mesh was not affected by the inclusion of oestradiol and mechanical properties were only slightly modified. Oestradiol was released from PLA meshes over a 5-mo period. ADMSCs cultured on oestradiol-releasing PLA meshes produced more ECM involving collagen I, collagen III, and elastin. Oestradiol-releasing meshes doubled new blood vessel formation in the chorioallantoic membrane assay (p=0.001) and outgrowth of pro-angiogenic cells in the aortic arch assay (p=0.001). Further studies in longer-term animal models are required to confirm these results.

CONCLUSIONS

Oestradiol-releasing PLA meshes increase ECM production and stimulate angiogenesis. As such, they are promising candidate materials to be used in pelvic floor repair and to improve the initial healing phase of a repair material following implantation.

PATIENT SUMMARY

In this study, we designed a tissue engineered material to be used to support weakened pelvic floor tissues in women to avoid the complications associated with current surgical mesh. Our results showed that this material can stimulate new blood vessel formation in simple chick assays and tissue production in vitro. Both properties should help with the integration of this material into patients' tissues and merit further study in physiologically relevant animal models.

Characterization of biodegradable poly(lactic acid) porous scaffolds prepared using selective enzymatic degradation for tissue engineering

SEM images of MEF cells on PLA scaffolds prepared by selective enzymatic degradation after 7 days of culture. The results demonstrated that MEF cells attached more easily to the surface than in the interior of the PLA scaffolds.

Application of Tissue Engineering to Pelvic Organ Prolapse and Stress Urinary Incontinence

Synthetic or biological materials can be used for the surgical repair of pelvic organ prolapse (POP) or stress urinary incontinence (SUI). While non-degradable synthetic mesh has a low failure rate, it is prone to complications such as infection and erosion, particularly in the urological/gynecological setting when subject to chronic influences of gravity and intermittent, repetitive strain. Biological materials have lower complication rates, although allografts and xenografts have a high risk of failure and the theoretical risk of infection. Autografts are used successfully for the treatment of SUI and are not associated with erosion; however, can lead to morbidity at the donor site. Tissue engineering has thus become the focus of interest in recent years as researchers seek an ideal tissue remodeling material for urogynecological repair. Herein, we review the directions of current and future research in this exciting field. Electrospun poly-L-lactic acid (PLA) and porcine small intestine submucosa (SIS) are two promising scaffold material candidates. Adipose-derived stem cells (ADSCs) appear to be a suitable cell type for scaffold seeding, and cells grown on scaffolds when subjected to repetitive biaxial strain show more appropriate biomechanical properties for clinical implantation. After implantation, an appropriate level of acute inflammation is important to precipitate moderate fibrosis and encourage tissue strength. New research directions include the use of bioactive materials containing compounds that may help facilitate integration of the new tissue. More research with longer follow-up is needed to ascertain the most successful and safe methods and materials for pelvic organ repair and SUI treatment.

Production and Characterization of a Novel, Electrospun, Tri-Layer Polycaprolactone Membrane for the Segregated Co-Culture of Bone and Soft Tissue

Composite tissue-engineered constructs combining bone and soft tissue have applications in regenerative medicine, particularly dentistry. This study generated a tri-layer, electrospun, poly-ε-caprolactone membrane, with two microfiber layers separated by a layer of nanofibers, for the spatially segregated culture of mesenchymal progenitor cells (MPCs) and fibroblasts. The two cell types were seeded on either side, and cell proliferation and spatial organization were investigated over several weeks. Calcium deposition by MPCs was detected using xylenol orange (XO) and the separation between fibroblasts and the calcified matrix was visualized by confocal laser scanning microscopy. SEM confirmed that the scaffold consisted of two layers of micron-diameter fibers with a thin layer of nano-diameter fibers in-between. Complete separation of cell types was maintained and calcified matrix was observed on only one side of the membrane. This novel tri-layer membrane is capable of supporting the formation of a bilayer of calcified and non-calcified connective tissue.

Endometrial mesenchymal stem cells as a cell based therapy for pelvic organ prolapse

Pelvic organ prolapse (POP) occurs when the pelvic organs (bladder, bowel or uterus) herniate into the vagina, causing incontinence, voiding, bowel and sexual dysfunction, negatively impacting upon a woman’s quality of life. POP affects 25% of all women and results from childbirth injury. For 19% of all women, surgical reconstructive surgery is required for treatment, often augmented with surgical mesh. The surgical treatment fails in up to 30% of cases or results in adverse effects, such as pain and mesh erosion into the bladder, bowel or vagina. Due to these complications the Food and Drug Administration cautioned against the use of vaginal mesh and several major brands have been recently been withdrawn from market. In this review we will discuss new cell-based approaches being developed for the treatment of POP. Several cell types have been investigated in animal models, including a new source of mesenchymal stem/stromal cells (MSC) derived from human endometrium. The unique characteristics of endometrial MSC, methods for their isolation and purification and steps towards their development for good manufacturing practice production will be described. Animal models that could be used to examine the potential for this approach will also be discussed as will a rodent model showing promise in developing an endometrial MSC-based therapy for POP. The development of a preclinical large animal model for assessing tissue engineering constructs for treating POP will also be mentioned.

In vitro differentiation of endometrial regenerative cells into smooth muscle cells: Α potential approach for the management of pelvic organ prolapse

Pelvic organ prolapse (POP), is a common condition in parous women. Synthetic mesh was once considered to be the standard of care; however, the use of synthetic mesh is limited by severe complications, thus creating a need for novel approaches. The application of cell-based therapy with stem cells may be an ideal alternative, and specifically for vaginal prolapse. Abnormalities in vaginal smooth muscle (SM) play a role in the pathogenesis of POP, indicating that smooth muscle cells (SMCs) may be a potential therapeutic target. Endometrial regenerative cells (ERCs) are an easily accessible, readily available source of adult stem cells. In the present study, ERCs were obtained from human menstrual blood, and phase contrast microscopy and flow cytometry were performed to characterize the morphology and phenotype of the ERCs. SMC differentiation was induced by a transforming growth factor β1-based medium, and the induction conditions were optimized. We defined the SMC characteristics of the induced cells with regard to morphology and marker expression using transmission electron microscopy, western blot analysis, immunocytofluorescence and RT-PCR. Examining the expression of the components of the Smad pathway and phosphorylated Smad2 and Smad3 by western blot analysis, RT-PCR and quantitative PCR demonstrated that the 'TGFBR2/ALK5/Smad2 and Smad3' pathway is involved, and both Smad2 and Smad3 participated in SMC differentiation. Taken together, these findings indicate that ERCs may be a promising cell source for cellular therapy aimed at modulating SM function in the vagina wall and pelvic floor in order to treat POP.

Developing Repair Materials for Stress Urinary Incontinence to Withstand Dynamic Distension

BACKGROUND

Polypropylene mesh used as a mid-urethral sling is associated with severe clinical complications in a significant minority of patients. Current in vitro mechanical testing shows that polypropylene responds inadequately to mechanical distension and is also poor at supporting cell proliferation.

AIMS AND OBJECTIVES

Our objective therefore is to produce materials with more appropriate mechanical properties for use as a sling material but which can also support cell integration.

METHODS

Scaffolds of two polyurethanes (PU), poly-L-lactic acid (PLA) and co-polymers of the two were produced by electrospinning. Mechanical properties of materials were assessed and compared to polypropylene. The interaction of adipose derived stem cells (ADSC) with the scaffolds was also assessed. Uniaxial tensiometry of scaffolds was performed before and after seven days of cyclical distension. Cell penetration (using DAPI and a fluorescent red cell tracker dye), viability (AlamarBlue assay) and total collagen production (Sirius red assay) were measured for ADSC cultured on scaffolds.

RESULTS

Polypropylene was stronger than polyurethanes and PLA. However, polypropylene mesh deformed plastically after 7 days of sustained cyclical distention, while polyurethanes maintained their elasticity. Scaffolds of PU containing PLA were weaker and stiffer than PU or polypropylene but were significantly better than PU scaffolds alone at supporting ADSC.

CONCLUSIONS

Therefore, prolonged mechanical distension in vitro causes polypropylene to fail. Materials with more appropriate mechanical properties for use as sling materials can be produced using PU. Combining PLA with PU greatly improves interaction of cells with this material.

Biodegradable scaffolds designed to mimic fascia-like properties for the treatment of pelvic organ prolapse and stress urinary incontinence

There is an urgent clinical need for better synthetic materials to be used in surgical support of the pelvic floor. The aim of the current study was to construct biodegradable synthetic scaffolds that mimic the three-dimensional architecture of human fascia, which can integrate better into host tissues both mechanically and biologically. Therefore, four different polylactic acid (PLA) scaffolds with various degrees of fibre alignment were electrospun by modifying the electrospinning parameters. Physical and mechanical properties were assessed using a BOSE electroforce tensiometer. The attachment, viability and extracellular matrix production of adipose-derived stem cells cultured on the polylactic acid scaffolds were evaluated. The bulk density of the scaffolds decreased as the proportion of aligned fibres increased. Scaffolds became stronger and stiffer with increasing amounts of aligned fibres as measured along the axis parallel to the fibre alignment. In addition, more total collagen was produced on scaffolds with aligned fibres and was organised in the direction of the aligned fibres. In conclusion, the electrospinning technique can be easily modified to develop biodegradable scaffolds with a spectrum of mechanical properties allowing extracellular matrix organisation towards human-like fascia.

Stem Cell Therapy for Treatment of Stress Urinary Incontinence: The Current Status and Challenges

Stress urinary incontinence (SUI) is a common urinary system disease that mostly affects women. Current treatments still do not solve the critical problem of urethral sphincter dysfunction. In recent years, there have been major developments in techniques to obtain, culture, and characterize autologous stem cells as well as many studies describing their applications for the treatment of SUI. In this paper, we review recent publications and clinical trials investigating the applications of several stem cell types as potential treatments for SUI and the underlying challenges of such therapy.

Production of ascorbic acid releasing biomaterials for pelvic floor repair

OBJECTIVE

An underlying abnormality in collagen turnover is implied in the occurrence of complications and recurrences after mesh augmented pelvic floor repair surgeries. Ascorbic acid is a potent stimulant of collagen synthesis. The aim of this study is to produce ascorbic acid releasing poly-lactic acid (PLA) scaffolds and evaluate them for their effects on extracellular matrix production and the strength of the materials.

MATERIALS AND METHODS

Scaffolds which contained either l-ascorbic acid (AA) and Ascorbate-2-Phosphate (A2P) were produced with emulsion electrospinning. The release of both drugs was measured by UV spectrophotometry. Human dermal fibroblasts were seeded on scaffolds and cultured for 2weeks. Cell attachment, viability and total collagen production were evaluated as well as mechanical properties.

RESULTS

No significant differences were observed between AA, A2P, Vehicle and PLA scaffolds in terms of fibre diameter and pore size. The encapsulation efficiency and successful release of both AA and A2P were demonstrated. Both AA and A2P containing scaffolds were significantly more hydrophilic and stronger in both dry and wet states compared to PLA scaffolds. Fibroblasts produced more collagen on scaffolds containing either AA or A2P compared to cells grown on control scaffolds.

CONCLUSION

This study is the first to directly compare the two ascorbic acid derivatives in a tissue engineered scaffold and shows that both AA and A2P releasing electrospun PLA scaffolds increased collagen production of fibroblasts to similar extents but AA scaffolds seemed to be more hydrophilic and stronger compared to A2P scaffolds.

STATEMENT OF SIGNIFICANCE

Mesh augmented surgical repair of the pelvic floor currently relies on non-degradable materials which results in severe complications in some patients. There is an unmet and urgent need for better pelvic floor repair materials. Our current understanding suggests that the ideal material should be able to better integrate into sites of implantation both biologically and mechanically. The impact of vitamin C on extracellular matrix production is well established but we in this study have undertaken a critical comparison of two derivatives of vitamin C as they are released from a biodegradable scaffold. This strategy proved to be equally useful with both derivatives in terms of new tissue production yet we observed significant differences in mechanical properties of these biomaterials.

Tunable tissue scaffolds fabricated by in situ crosslink in phase separation system

Three-dimensional (3-D) scaffolds with intrinsic porous structures are desirable in various tissue regeneration applications. In this study, a unique method that combines thermally induced phase separation with a photocrosslinking process was developed for the fabrication of 3-D crosslinked polymer scaffolds with densely interconnected porous structures. Biodegradable poly(propylene fumarate)-co-poly(L-lactic acid) with crosslinkable fumarate bonds were used as the structural polymer material and a dioxane/water binary system was applied for the phase separation. By altering the polymer composition (9, 5 and 3 wt%), different types of scaffolds with distinct morphology, mechanical strength, degradation rate, cell growth and morphology, and extracellular matrix production were fabricated. These crosslinked 3-D porous scaffolds with tunable strength and biological responses show promise for potential applications in regenerative therapies, including bone and neural tissue engineering.

Development of an implantable synthetic membrane for the treatment of preterm premature rupture of fetal membranes

Preterm premature rupture of fetal membranes is a very common condition leading to premature labour of a non viable fetus. Significant morbidities may occur when preterm premature rupture of fetal membranes management is attempted to prolong the pregnancy for fetal maturation. Reducing the rate of loss of amniotic fluid and providing a barrier to bacterial entry may allow the pregnancy to continue to term, avoiding complications. Our aim is to develop a synthetic biocompatible membrane to form a distensible barrier for cervical closure which acts to reduce fluid loss and provide a surface for epithelial ingrowth to help repair the damaged membranes. Therefore, a bilayer membrane was developed using an electrospinning technique of combining two FDA-approved polymers, poly-L-lactic acid (PLA) and polyurethane (Z3) polymer. This was compared to a plain electrospun Z3 membrane. The physical and mechanical properties were assessed using scanning electron microscope images and a BOSE tensiometer, respectively, and compared to native fetal membranes. The performance of the membranes in preventing fluid loss was assessed by measuring their ability to support a column of water. Finally the ability of the membranes to support cell ingrowth was assessed by culturing adipose-derived stem cells on the membranes for two weeks and assessing metabolic activity after 7 and 14 days. The physical properties of the bilayer were similar to that of the native fetal membranes and it was resistant to fluid penetration. This bilayer membrane presented mechanical properties close to those for fetal membranes and showed elastic distention, which may be crucial for progress of the pregnancy. The membrane was also able to retain surgical sutures. In addition, it also supported the attachment and growth of adipose-derived stem cells for two weeks. In conclusion, this membrane may prove a useful approach in the treatment of preterm premature rupture of fetal membranes and now merits further investigation.

In vivo effects of human adipose-derived stem cells reseeding on acellular bovine pericardium in nude mice

Tissue-engineered biologic products may be a viable option in the reconstruction of pelvic organ prolapse (POP). This study was based on the hypothesis that human adipose-derived stem cells (hASCs) are viable in acellular bovine pericardium (ABP), when reseeded by two different techniques, and thus, aid in the reconstruction. To investigate the reseeding of hASCs on ABP grafts by using non-invasive bioluminescence imaging (BLI), and to identify the effective hASCs-scaffold combinations that enabled regeneration. Thirty female athymic nude mice were randomly divided into three groups: In the VIVO group, ABPs were implanted in the subcutaneous pockets and enhanced green fluorescent protein luciferase (eGFP·Luc)-hASCs (1 × 10(6) cells/50 µL) were injected on the ABP at the same time. In the VITRO group, the mice were implanted with grafts that ABP were co-cultured with eGFP·Luc-hASCs in vitro. The BLANK group mice were implanted with ABP only. The eGFP·Luc-hASCs reseeded on ABP were analyzed by BLI, histology, and immunohistochemistry. The eGFP·Luc-hASCs reseeded on ABP could be visualized at 12 weeks in vivo. Histology revealed that the VIVO group displayed the highest cell ingrowths, small vessels, and percent of collagen content per unit area. Desmin and α-smooth muscle actin were positive at the same site in the VIVO group cells. However, few smooth muscles were observed in the VITRO and BLANK groups. These results suggest that hASCs reseeded on ABP in vivo during surgery may further enhance the properties of ABP and may promote regeneration at the recipient site, resulting in a promising treatment option for POP.

Biomimetic poly(glycerol sebacate)/poly(l-lactic acid) blend scaffolds for adipose tissue engineering

Large three-dimensional poly(glycerol sebacate) (PGS)/poly(l-lactic acid) (PLLA) scaffolds with similar bulk mechanical properties to native low and high stress adapted adipose tissue were fabricated via a freeze-drying and a subsequent curing process. PGS/PLLA scaffolds containing 73vol.% PGS were prepared using two different organic solvents, resulting in highly interconnected open-pore structures with porosities and pore sizes in the range of 91-92% and 109-141μm, respectively. Scanning electron microscopic analysis indicated that the scaffolds featured different microstructure characteristics, depending on the organic solvent in use. The PGS/PLLA scaffolds had a tensile Young's modulus of 0.030MPa, tensile strength of 0.007MPa, elongation at the maximum stress of 25% and full shape recovery capability upon release of the compressive load. In vitro degradation tests presented mass losses of 11-16% and 54-55% without and with the presence of lipase enzyme in 31days, respectively. In vitro cell tests exhibited clear evidence that the PGS/PLLA scaffolds prepared with 1,4-dioxane as the solvent are suitable for culture of adipose derived stem cells. Compared to pristine PLLA scaffolds prepared with the same procedure, these scaffolds provided favourable porous microstructures, good hydrophilic characteristics, and appropriate mechanical properties for soft tissue applications, as well as enhanced scaffold cell penetration and tissue in-growth characteristics. This work demonstrates that the PGS/PLLA scaffolds have potential for applications in adipose tissue engineering.

Slings for urinary incontinence and the application of cell-based therapy

The most commonly used technique for the treatment of stress urinary incontinence (SUI) in women is the suburethral polypropylene sling, using either a retropubic or transobturator tape approach This treatment results in a cure rate of over 80%, based on both subjective and objective evaluations. Biological slings have been largely abandoned due to lack of efficacy. Despite the high success rates, 10-20% of women remain incontinent. Cell-based therapy might offer solutions for the future both for the primary setting as for the treatment of failures. Preclinical studies suggest that stem cells (SC) can enhance the recovery of damaged tissue either by direct integration and replacement of damaged tissue (differentiation) or by secreting factors that influence host response mechanisms (paracrine effect). The clinical data to date do not allow strong efficacy conclusions, except that SC therapy seems to be safe in the short term. Most published studies use autologous cells. Allogeneic cell sources need to be investigated as well to allow ready-to-use solutions in the future. Most importantly, we need better insight into the mechanisms of action. We need more basic stem cell research, better acute and chronic animal models, better investigational tools and more efforts using tissue engineering approach.

Induction of endometrial mesenchymal stem cells into tissue-forming cells suitable for fascial repair

Pelvic organ prolapse is a major hidden burden affecting almost one in four women. It is treated by reconstructive surgery, often augmented with synthetic mesh. To overcome the growing concerns of using current synthetic meshes coupled with the high risk of reoperation, a tissue engineering strategy has been developed, adopting a novel source of mesenchymal stem cells. These cells are derived from the highly regenerative endometrial lining of the uterus (eMSCs) and will be delivered in vivo using a new gelatin-coated polyamide scaffold. In this study, gelatin properties were optimized by altering the gelatin concentration and extent of crosslinking to produce the desired gelation and degradation rate in culture. Following cell seeding of uncoated polyamide (PA) and gelatin-coated meshes (PA+G), the growth rate of eMSCs on the PA+G scaffolds was more than that on the PA alone, without compromising cell shape. eMSCs cultured on the PA+G scaffold retained their phenotype, as demonstrated by W5C5/SUSD2 (eMSC-specific marker) immunocytochemistry. Additionally, eMSCs were induced to differentiate into smooth muscle cells (SMC), as shown by immunofluorescence for smooth muscle protein 22 and smooth muscle myosin heavy chain. eMSCs also differentiated into fibroblast-like cells when treated with connective tissue growth factor with enhanced detection of Tenascin-C and collagen type I as well as new tissue formation, as seen by Masson's trichrome. In summary, it was demonstrated that the PA+G scaffold is an appropriate platform for eMSC delivery, proliferation and differentiation into SMC and fibroblasts, with good biocompatibility and the capacity to regenerate neo-tissue.

Prevention and management of pelvic organ prolapse

Pelvic organ prolapse is a highly prevalent condition in the female population, which impairs the health-related quality of life of affected individuals. Despite the lack of robust evidence, selective modification of obstetric events or other risk factors could play a central role in the prevention of prolapse. While the value of pelvic floor muscle training as a preventive treatment remains uncertain, it has an essential role in the conservative management of prolapse. Surgical trends are currently changing due to the controversial issues surrounding the use of mesh and the increasing demand for uterine preservation. The evolution of laparoscopic and robotic surgery has increased the use of these techniques in pelvic floor surgery.

Acute in vivo response to an alternative implant for urogynecology

Purpose. To investigate in vivo the acute host response to an alternative implant designed for the treatment of stress urinary incontinence (SUI) and pelvic organ prolapse (POP). Methods. A biodegradable scaffold was produced from poly-L-lactic acid (PLA) using the electrospinning technique. Human and rat adipose-derived stem cells (ADSCs) were isolated and characterized by fluorescence-activated cell sorting and differentiation assays. PLA scaffolds were seeded and cultured for 2 weeks with human or rat ADSCs. Scaffolds with and without human or rat ADSCs were implanted subcutaneously on the abdominal wall of rats. After 3 and 7 days, 6 animals from each group were sacrificed. Sections from each sample were analyzed by Haematoxylin and Eosin staining, Sirius red staining, and immunohistochemistry for CD68, PECAM-1, and collagen I and III. Results. Animals responded to the scaffolds with an acute macrophage response. After 7 days of implantation, there was extensive host cell penetration, new blood vessel formation, and new collagen deposition throughout the full thickness of the samples without obvious differences between cell-containing and cell-free scaffolds. Conclusions. The acute in vivo response to an alternative implant (both with and without cells) for the treatment of SUI and POP showed good acute integration into the host tissues.