Chitosan-based hydrogels: recent design concepts to tailor properties and functions

Chitosan-based hydrogels: Influence of crosslinking strategy on rheological properties

The effect of two crosslink strategies on the preparation of chitosan-based covalent hydrogels was investigated employing the widely used thiol-ene reaction. This versatile "click" chemistry can be activated either photochemically or thermochemically. Initially, well-purified chitosan (CS, DA ∼4 %, Mw ∼580 kg mol-1) was separately functionalized with vinyl (CS-ene) or thiol (CS-SH) groups in aqueous media. Subsequently, two strategies were compared where thiol-ene reaction occurs respectively between: (S1) modified chitosans CS-ene and CS-SH, in a polymer - polymer strategy, and (S2) CS-ene and di(ethylene glycol) dithiol (dEG-(SH)2), in a polymer - molecule strategy. Both crosslinking strategies were evaluated through rheological measurements, starting with entangled chitosan solutions. The difference in diffusion of functional groups, whether attached to polymer chains or to free molecules, leads to faster gelation kinetics with S2. Consequently, stronger gels were obtained with S2, where the modulus was connected with the degree of functionalization, while S1 produced weaker gels closer to the percolation point, where crosslinked density was associated with the entanglement number derived from the initial concentration. Nevertheless, networks formed by both strategies were homogenous with minimal dissipative contributions to their rheological properties, indicating that structural defects are negligible.

Stretchable hydrogels of chitosan/hyaluronic acid induced by polyelectrolyte complexation around neutral pH

In this work, we propose the formation of stretchable hydrogels at neutral pH from the physical crosslinking of chitosan (CS) and hyaluronic acid (HA) by polyelectrolyte complexation. A mixture of CS (Mw ≈ 600 kg/mol, degree of acetylation ≈ 50 %) solution and HA (Mw ≈ 77 kg/mol) solution was prepared with an excess of salts screening the electrostatic interactions CS/HA. In a controlled manner, the polyelectrolyte complexation was induced through the progressive dialysis of the salted polymer mixture against a sodium acetate solution (AcONa, 0.01 M) for 7 days. Depending on [HA], various materials were obtained: viscous solutions at [HA] = 0.75 % (w/v); hydrogels at [HA] = 1.50-2.24 % (w/v) with Young modulus of 14 kPa and stretchable to 200 %. The small angle X-ray scattering characterization of the hydrogels revealed a multiscale organization related to the conformation of the polymers induced by the physical interactions. The dialysis process with AcONa was optimized by adding a dialysis step against a zinc acetate solution containing Zn2+. The combination of polyelectrolyte complexation between CS/HA and metal complexation between Zn2+ and the polymers led to an enhancement of the hydrogel stretchability up to 400 %.

Gelatin/O-carboxymethyl chitosan injectable self-healing hydrogels for ibuprofen and naproxen dual release

Recently, a significantly greater clinical benefit has been reported with a combination of glucosamine sulfate and nonsteroidal anti-inflammatory drugs (NSAIDs) compared to either treatment alone for the growing osteoarthritis (OA) disease. So, this study introduces hydrogels using O-carboxymethyl chitosan (O-CMC, structurally akin glucosamine glycan), and Gelatin type A (GA) in a 1:2 ratio with β-glycerophosphate (βGPh) at varying percentages (5 %, 12.5 %, and 15 %). We show that hydrogel properties, adaptable for drug delivery or tissue engineering, can be fine-tuned based on OCMC:βGPh ratio. CMC/GA/βGPh-12.5 exhibited a swelling rate of 189 %, compressive stress of 164 kPa, and compressive modulus of 3.4 kPa. The self-healing hydrogel also exhibited excellent injectability through a 21-gauge needle, requiring only 5 N of force. Ibuprofen and Naproxen release from CMC/GA/βGPh-12.5 and CMC/GA/βGPh-15 of designed dimensions (bi-layer structures of different diameter and height) were measured, and drug release kinetics were estimated using mathematical equations (MATLAB and polyfit program). CMC/GA/βGPh-12.5 demonstrated significant antibacterial effects against E. coli and S. aureus, a high cell survival rate of 89 % against L929 fibroblasts, and strong cell adhesion, all indicating biocompatibility. These findings underscore potential of these hydrogels as promising candidates for treating inflammatory diseases such as osteoarthritis.

Evaluation of ethanol-induced chitosan aerogels with human osteoblast cells

The following article provides an insight into the production of chitosan aerogels as potential materials for tissue engineering. Chitosan aerogels were prepared following two different protocols: formation in ethanol and formation in sodium hydroxide in an ethanol solution. The main objective was to apply a new route to obtain chitosan aerogels with no external cross-linkers and compare the mentioned preparation approaches. Forming chitosan aerogels in ethanol implies a simple, environmentally friendly, and efficient method. The prepared materials showed specific surface areas of up to 450 m2/g, highly porous networks and great mechanical properties. In vitro degradation studies revealed high stability for up to 10 weeks. The differences between the samples were significant. While the chitosan aerogels prepared in ethanol showed superior textural, morphological and mechanical properties, the chitosan aerogels prepared in the sodium hydroxide solution proved that a considerable influence on end properties could be made simply by adjusting the ageing medium. In vitro cell analysis with primary human osteoblasts showed good biocompatibility and pointed towards the potential use of these aerogels for orthopedic applications. This testing showed further that adjustments in structural properties by sodium hydroxide also come with a cost regarding their suitability to host bone cells.

Photo-cross-linked Hydrogels for Cartilage and Osteochondral Repair

Photo-cross-linked hydrogels, which respond to light and induce structural or morphological transitions, form a microenvironment that mimics the extracellular matrix of native tissue. In the last decades, photo-cross-linked hydrogels have been widely used in cartilage and osteochondral tissue engineering due to their good biocompatibility, ease of fabrication, rapid in situ gel-forming ability, and tunable mechanical and degradable properties. In this review, we systemically summarize the different types and physicochemical properties of photo-cross-linked hydrogels (including the materials and photoinitiators) and explore the biological properties modulated through the incorporation of additives, including cells, biomolecules, genes, and nanomaterials, into photo-cross-linked hydrogels. Subsequently, we compile the applications of photo-cross-linked hydrogels with a specific focus on cartilage and osteochondral repair. Finally, current limitations and future perspectives of photo-cross-linked hydrogels are also discussed.

Advances in Transdermal Delivery of Antimicrobial Peptides for Wound Management: Biomaterial-Based Approaches and Future Perspectives

Antimicrobial peptides (AMPs), distinguished by their cationic and amphiphilic nature, represent a critical frontier in the battle against antimicrobial resistance due to their potent antimicrobial activity and a broad spectrum of action. However, the clinical translation of AMPs faces hurdles, including their susceptibility to degradation, limited bioavailability, and the need for targeted delivery. Transdermal delivery has immense potential for optimizing AMP administration for wound management. Leveraging the skin's accessibility and barrier properties, transdermal delivery offers a noninvasive approach that can circumvent systemic side effects and ensure sustained release. Biomaterial-based delivery systems, encompassing nanofibers, hydrogels, nanoparticles, and liposomes, have emerged as key players in enhancing the efficacy of transdermal AMP delivery. These biomaterial carriers not only shield AMPs from enzymatic degradation but also provide controlled release mechanisms, thereby elevating stability and bioavailability. The synergistic interaction between the transdermal approach and biomaterial-facilitated formulations presents a promising strategy to overcome the multifaceted challenges associated with AMP delivery. Integrating advanced technologies and personalized medicine, this convergence allows the reimagining of wound care. This review amalgamates insights to propose a pathway where AMPs, transdermal delivery, and biomaterial innovation harmonize for effective wound management.

Proliferative and Osteogenic Supportive Effect of VEGF-Loaded Collagen-Chitosan Hydrogel System in Bone Marrow Derived Mesenchymal Stem Cells

The use of hydrogel (HG) in regenerative medicine is an emerging field and thus several approaches have been proposed recently to find an appropriate hydrogel system. In this sense, this study developed a novel HG system using collagen, chitosan, and VEGF composites for culturing mesenchymal stem cells (MSCs), and investigated their ability for osteogenic differentiation and mineral deposition. Our results showed that the HG loaded with 100 ng/mL VEGF (HG-100) significantly supported the proliferation of undifferentiated MSCs, the fibrillary filament structure (HE stain), mineralization (alizarin red S and von Kossa stain), alkaline phosphatase, and the osteogenesis of differentiated MSCs compared to other hydrogels (loaded with 25 and 50 ng/mL VEGF) and control (without hydrogel). HG-100 showed a higher VEGF releasing rate from day 3 to day 7 than other HGs, which substantially supports the proliferative and osteogenic properties of HG-100. However, the HGs did not increase the cell growth in differentiated MSCs on days 14 and 21 due to the confluence state (reach stationary phase) and cell loading ability, regardless of the VEGF content. Similarly, the HGs alone did not stimulate the osteogenesis of MSCs; however, they increased the osteogenic ability of MSCs in presence of osteogenic supplements. Accordingly, a fabricated HG with VEGF could be used as an appropriate system to culture stem cells for bone and dental regeneration.

A pH and Temperature Dual-Responsive Microgel-Embedded, Adhesive, and Tough Hydrogel for Drug Delivery and Wound Healing

Stimuli-responsive hydrogels have attracted much attention over the past decade for potential bioengineering applications such as wound dressing and drug delivery. In this work, a pH and temperature dual-responsive microgel-embedded hydrogel has been fabricated by incorporating poly(N-isopropylacrylamide-co-acrylic acid) (PNIPAAm-co-AAc) based microgel particles into polyacrylamide (PAAm)/chitosan (CS) semi-interpenetrating polymer network (semi-IPN), denoted as microgel@PAM/CS. The resultant hydrogel possesses excellent mechanical properties including stretchability, compressibility, and elasticity. In addition, the microgel@PAM/CS hydrogels can tightly adhere to the surfaces of a variety of tissues such as porcine skin, kidney, intestine, liver, and heart. Moreover, it shows controlled dual-drug release profile of both bovine serum albumin (BSA) (as a model protein) and sulfamethoxazole (SMZ), an antibiotic. Excellent antimicrobial properties are obtained for SMZ-loaded microgel@PAM/CS hydrogels. Compared with traditional drug administration methods such as by mouth, injection, and inhalation, the microgel@PAM/CS hydrogels possess advantages such as higher drug loading efficiency (by more than 80%) and controllable and sustained (over 48 h) release. The microgel@PAM/CS hydrogels can significantly enhance the wound healing process. This work provides a facile approach for the fabrication of multifunctional stimuli-responsive microparticle-embedded hydrogels with semi-IPN structures, and the as-prepared microgel@PAM/CS hydrogels have great potential for applications as smart wound dressing materials in biomedical engineering.

Nanosystems, Drug Molecule Functionalization and Intranasal Delivery: An Update on the Most Promising Strategies for Increasing the Therapeutic Efficacy of Antidepressant and Anxiolytic Drugs

Depression and anxiety are high incidence and debilitating psychiatric disorders, usually treated by antidepressant or anxiolytic drug administration, respectively. Nevertheless, treatment is usually given through the oral route, but the low permeability of the blood-brain barrier reduces the amount of drug that will be able to reach it, thus consequently reducing the therapeutic efficacy. Which is why it is imperative to find new solutions to make these treatments more effective, safer, and faster. To overcome this obstacle, three main strategies have been used to improve brain drug targeting: the intranasal route of administration, which allows the drug to be directly transported to the brain by neuronal pathways, bypassing the blood-brain barrier and avoiding the hepatic and gastrointestinal metabolism; the use of nanosystems for drug encapsulation, including polymeric and lipidic nanoparticles, nanometric emulsions, and nanogels; and drug molecule functionalization by ligand attachment, such as peptides and polymers. Pharmacokinetic and pharmacodynamic in vivo studies' results have shown that intranasal administration can be more efficient in brain targeting than other administration routes, and that the use of nanoformulations and drug functionalization can be quite advantageous in increasing brain-drug bioavailability. These strategies could be the key to future improved therapies for depressive and anxiety disorders.

Electrochemically Enhanced Delivery of Pemetrexed from Electroactive Hydrogels

Electroactive hydrogels based on derivatives of polyethyleneglycol (PEG), chitosan and polypyrrole were prepared via a combination of photopolymerization and oxidative chemical polymerization, and optionally doped with anions (e.g., lignin, drugs, etc.). The products were analyzed with a variety of techniques, including: FT-IR, UV-Vis, ¹H NMR (solution state), ¹³C NMR (solid state), XRD, TGA, SEM, swelling ratios and rheology. The conductive gels swell ca. 8 times less than the non-conductive gels due to the presence of the interpenetrating network (IPN) of polypyrrole and lignin. A rheological study showed that the non-conductive gels are soft (G' 0.35 kPa, G″ 0.02 kPa) with properties analogous to brain tissue, whereas the conductive gels are significantly stronger (G' 30 kPa, G″ 19 kPa) analogous to breast tissue due to the presence of the IPN of polypyrrole and lignin. The potential of these biomaterials to be used for biomedical applications was validated in vitro by cell culture studies (assessing adhesion and proliferation of fibroblasts) and drug delivery studies (electrochemically loading the FDA-approved chemotherapeutic pemetrexed and measuring passive and stimulated release); indeed, the application of electrical stimulus enhanced the release of PEM from gels by ca. 10-15% relative to the passive release control experiment for each application of electrical stimulation over a short period analogous to the duration of stimulation applied for electrochemotherapy. It is foreseeable that such materials could be integrated in electrochemotherapeutic medical devices, e.g., electrode arrays or plates currently used in the clinic.

Effect of Citric Acid Cross Linking on the Mechanical, Rheological and Barrier Properties of Chitosan

In this study, acetic acid (AA-2% w/v), a combination of acetic acid and citric acid (AA-1% w/v + CA-1% w/w), and three different concentrations of citric acid (CA-2, 4 and 6% w/w) were used to create chitosan solution. The FTIR analysis showed the presence of residual CA in all the CA-containing samples where no trace of AA was observed. The tensile strengths of the CA-containing samples were lower than the AA samples. Whereas the values for the elongation at break of the CA samples were higher than the AA samples, which kept increasing with an increasing CA content due to the plasticizing effect from residual citric acid. The elongation at break values for 4 and 6% CA-containing samples were 98% higher than the AA samples. The samples prepared with CA showed shorter LVE regions that reduced with an increasing CA concentration compared to the AA samples. Different acid concentrations did not have a large effect on the gelation time. However, CA-containing samples showed higher viscosities as compared to the AA-containing solution, which increased with an increasing CA content. The water vapour transmission rates of the CA-containing samples were lower than the others. All the chitosan solutions suppressed the growth of the two test strains, and none of the variants reached an abs 600 nm at 0.2.

Synthesis of nanocapsules blended polymeric hydrogel loaded with bupivacaine drug delivery system for local anesthetics and pain management

Local anesthetics are used clinically for the control of postoperative pain management. This study aimed to develop chitosan (CS) with genipin (GP) hydrogels as the hydrophilic lipid shell loaded poly(ε-caprolactone) (PC) nanocapsules as the hydrophobic polymeric core composites (CS-GP/PC) to deliver bupivacaine (BPV) for the prolongation of anesthesia and pain relief. The swelling ratio, in vitro degradation, and rheological properties enhancement of CS-GP/PC polymeric hydrogel. The incorporation of PC nanocapsules into CS-GP hydrogels was confirmed by SEM, FTIR, and XRD analysis. Scanning electron microscopy results demonstrated that the CS-GP hydrogels and CS-GP/PC polymeric hydrogels have a porous structure, the pore dimensions being non-uniform with diameters between 25 and 300 μm. The in vitro drug release profile of CS-GP/PC polymeric hydrogel has been achieved 99.2 ± 1.12% of BPV drug release in 36 h. Cellular viability was evaluated using the CCK-8 test on 3T3 fibroblast cells revealed that the obtained CS-GP/PC polymeric hydrogel with BPV exhibited no obvious cytotoxicity. The CS-GP/PC polymeric hydrogel loaded with BPV showed significant improvement in pain response compared to the control group animals for at least 7 days. When compared with BPV solution, CS-GP hydrogel and CS-GP/PC polymeric hydrogel improved the skin permeation of BPV 3-fold and 5-fold in 24 h, respectively. In vitro and in vivo results pointed out PC nanocapsules loaded CS-GP hydrogel can act as effective drug carriers, thus prolonging and enhancing the anesthetic effect of BPV. Histopathological results demonstrated the excellent biodegradability and biocompatibility of the BPV-loaded CS-GP/PC polymeric hydrogel system on 7, 14, and 21 days without neurotoxicity.

HIGHLIGHTS

Preparation and characterization of CS-GP/PC polymeric hydrogel system.

BPV-loaded CS-GP/PC exhibited prolonged in vitro release in PBS solution.

Cytotoxicity of BPV-loaded CS-GP/PC polymeric hydrogel against fibroblast (3T3) cells.

Development of CS-GP/PC a promising skin drug-delivery system for local anesthetic BPV.

Controlled Liposome Delivery from Chitosan-Based Thermosensitive Hydrogel for Regenerative Medicine

This work describes the development of an injectable nanocomposite system based on a chitosan thermosensitive hydrogel combined with liposomes for regenerative medicine applications. Liposomes with good physicochemical properties are prepared and embedded within the chitosan network. The resulting nanocomposite hydrogel is able to provide a controlled release of the content from liposomes, which are able to interact with cells and be internalized. The cellular uptake is enhanced by the presence of a chitosan coating, and cells incubated with liposomes embedded within thermosensitive hydrogels displayed a higher cell uptake compared to cells incubated with liposomes alone. Furthermore, the gelation temperature of the system resulted to be equal to 32.6 °C; thus, the system can be easily injected in the target site to form a hydrogel at physiological temperature. Given the peculiar performance of the selected systems, the resulting thermosensitive hydrogels are a versatile platform and display potential applications as controlled delivery systems of liposomes for tissue regeneration.

Sustainable production and co-immobilization of cold-active enzymes from Pseudomonas sp. for BTEX biodegradation

Toluene/o-Xylene Monooxygenase (ToMO) is equipped with a broad spectrum of aromatic substrate specificity (such as BTEX; benzene, toluene, ethylbenzene, and isomers of xylenes). TOMO has can hydroxylate more than a single position of aromatic rings in two consecutive monooxygenation reactions. Catechol 1,2-dioxygenase (C1,2D) is an iron-containing enzyme able to cleave the ring of catechol (the converted product from ToMO) for complete detoxification of BTEX. In this study, cold-active ToMO and C1,2D were produced using newly isolated psychrophilic Pseudomonas S2TR-14 in the minimal salt medium supplemented with crustacean waste and different concentrations of used motor oil (0.2-2% (v/v)). Crude ToMO and C1,2D were immobilized into micro/nano biochar-chitosan matrices and used for BTEX biodegradation. The results showed that the highest enzyme production (12 U/mg for ToMO and 22 U/mg for C1,2D) was achieved at the presence of 0.5% v/v used motor oil compared to the control group without motor oil (0.07 and 0.06 U/mg). High immobilization yield was achieved due to covalent bonding of ToMO (92.26% for micro matrix and 77.20% for nano matrix) and C1,2D (87.57% for micro matrix and 74.79% for nano matrix) with matrices. FTIR spectra confirmed the immobilization of enzymes on the surface of microbiochar and nanobiochar-chitosan matrices as proper support. The immobilization increased the storage stability of the enzymes with more than 50% residual activity after 30 days at 4 ± 1 °C, while the free form of enzymes had less than 10% of its activity. Immobilized enzymes degraded more than 80% of BTEX (~200 mg/L in groundwater and ~10,000 mg/kg in soil) at 10 ± 1 °C in groundwater and soil. Therefore, integrated use of microbiochar and nanobiochar with chitosan for co-immobilization of ToMO and C1,2D can be a potential way to remove petroleum hydrocarbons with higher efficiency from contaminated groundwater and soil.

Materials Based on Chitosan and Polylactide: From Biodegradable Plastics to Tissue Engineering Constructions

Abstract

The transition to green chemistry and biodegradable polymers is a logical stage in the development of modern chemical science and technology. In the framework of this review, the advantages, disadvantages, and potential of biodegradable polymers of synthetic and natural origin are compared using the example of polylactide and chitosan as traditional representatives of these classes of polymers, and the possibilities of their combination via obtaining composite materials or copolymers are assessed. The mechanochemical approach to the synthesis of graft copolymers of chitosan with oligolactides/polylactides is considered in more detail.

Chitosan-dipeptide hydrogels as potential anticancer drug delivery systems

A novel chitosan-dipeptide hydrogel was fabricated through a combination of self-assembly of 9-fluorenylmethoxycarbonyl-modified diphenylalanine (Fmoc-FF) and its electrostatic interaction with glycol chitosan (GCS). Hydrogel strength and stability depended on its composition. The highest gel strength was observed at a Fmoc-FF mass fraction (ϕ_FF) of 0.85, whereby the highest combined strength of the two interactions was achieved. As the ϕ_FF increased above 0.6, gel stability decreased in buffered solution at pH 7.46. The incorporation of doxorubicin (DOX) as a cationic model drug significantly increased the stability of the complex hydrogels. DOX-loaded hydrogels exhibited slow DOX release, probably due to the drug's strong binding to Fmoc-FF via electrostatic attraction and the high gel stability. These hydrogels also exhibited excellent thixotropic features that facilitated the development of injectable self-healing drug delivery systems. Notably, DOX release was significantly accelerated as the pH of the medium decreased from 7.46 to 5.5 and 4.0, possibly due to hydrogel components' protonation. The DOX-loaded hydrogel exhibited notable cytotoxicity against A549 human lung cancer cells, which suggests the newly developed hydrogel to be a promising candidate vehicle for the localized and controlled drug delivery in cancer therapy.

Preparation of gels of chitosan through a hydrothermal reaction in the presence of malonic acid and cinnamaldehyde: characterization and antibacterial activity

The preparation of composite gels through the hydrothermal reaction of a mixture of chitosan (CH), malonic acid (MLA), urea (UR) and cinnamaldehyde (CA), all of which are sustainable materials, is reported.

On the Mechanism of Genipin Binding to Primary Amines in Lactose-Modified Chitosan at Neutral pH

The present manuscript deals with the elucidation of the mechanism of genipin binding by primary amines at neutral pH. UV-VIS and CD measurements both in the presence of oxygen and in oxygen-depleted conditions, combined with computational analyses, led to propose a novel mechanism for the formation of genipin derivatives. The indications collected with chiral and achiral primary amines allowed interpreting the genipin binding to a lactose-modified chitosan (CTL or Chitlac), which is soluble at all pH values. Two types of reaction and their kinetics were found in the presence of oxygen: (i) an interchain reticulation, which involves two genipin molecules and two polysaccharide chains, and (ii) a binding of one genipin molecule to the polymer chain without chain-chain reticulation. The latter evolves in additional interchain cross-links, leading to the formation of the well-known blue iridoid-derivatives.

Recent Advances of Chitosan-Based Injectable Hydrogels for Bone and Dental Tissue Regeneration

Traditional strategies of bone repair include autografts, allografts and surgical reconstructions, but they may bring about potential hazard of donor site morbidity, rejection, risk of disease transmission and repetitive surgery. Bone tissue engineering (BTE) is a multidisciplinary field that offers promising substitutes in biopharmaceutical applications, and chitosan (CS)-based bone reconstructions can be a potential candidate in regenerative tissue fields owing to its low immunogenicity, biodegradability, bioresorbable features, low-cost and economic nature. Formulations of CS-based injectable hydrogels with thermo/pH-response are advantageous in terms of their high-water imbibing capability, minimal invasiveness, porous networks, and ability to mold perfectly into an irregular defect. Additionally, CS combined with other naturally-derived or synthetic polymers and bioactive agents has proven to be an effective alternative to autologous bone and dental grafts. In this review, we will highlight the current progress in the development of preparation methods, physicochemical properties and applications of CS-based injectable hydrogels and their perspectives in bone and dental regeneration. We believe this review is intended as starting point and inspiration for future research effort to develop the next generation of tissue-engineering scaffold materials.

Cryostructuring of Polymeric Systems. 55. Retrospective View on the More than 40 Years of Studies Performed in the A.N.Nesmeyanov Institute of Organoelement Compounds with Respect of the Cryostructuring Processes in Polymeric Systems

The processes of cryostructuring in polymeric systems, the techniques of the preparation of diverse cryogels and cryostructurates, the physico-chemical mechanisms of their formation, and the applied potential of these advanced polymer materials are all of high scientific and practical interest in many countries. This review article describes and discusses the results of more than 40 years of studies in this field performed by the researchers from the A.N.Nesmeyanov Institute of Organoelement Compounds, Russian Academy of Sciences-one of the key centers, where such investigations are carried out. The review includes brief historical information, the description of the main effects and trends characteristic of the cryostructuring processes, the data on the morphological specifics inherent in the polymeric cryogels and cryostructurates, and examples of their implementation for solving certain applied tasks.

Polymer- and Hybrid-Based Biomaterials for Interstitial, Connective, Vascular, Nerve, Visceral and Musculoskeletal Tissue Engineering

In this review, materials based on polymers and hybrids possessing both organic and inorganic contents for repairing or facilitating cell growth in tissue engineering are discussed. Pure polymer based biomaterials are predominantly used to target soft tissues. Stipulated by possibilities of tuning the composition and concentration of their inorganic content, hybrid materials allow to mimic properties of various types of harder tissues. That leads to the concept of "one-matches-all" referring to materials possessing the same polymeric base, but different inorganic content to enable tissue growth and repair, proliferation of cells, and the formation of the ECM (extra cellular matrix). Furthermore, adding drug delivery carriers to coatings and scaffolds designed with such materials brings additional functionality by encapsulating active molecules, antibacterial agents, and growth factors. We discuss here materials and methods of their assembly from a general perspective together with their applications in various tissue engineering sub-areas: interstitial, connective, vascular, nervous, visceral and musculoskeletal tissues. The overall aims of this review are two-fold: (a) to describe the needs and opportunities in the field of bio-medicine, which should be useful for material scientists, and (b) to present capabilities and resources available in the area of materials, which should be of interest for biologists and medical doctors.

Characterization of Chitosan/Hyaluronan Complex Coacervates Assembled by Varying Polymers Weight Ratio and Chitosan Physical-Chemical Composition

Herein, we synthetized and characterized polysaccharide-based complex coacervates starting from two water-soluble biopolymers, i.e., hydrochloride chitosans and sodium hyaluronan. We used chitosans encompassing a range of molecular weights from 30,000 to 400,000 and showing different fraction of acetylated units (i.e., FA = 0.16, 0.46, and 0.63). This set of chitosans was mixed with a low molecular weight hyaluronan to promote electrostatic interactions. Resulting colloids were analyzed in terms of size, polydispersity and surface charge by Dynamic Light Scattering. The weight ratio between the two polyelectrolytes was studied as additional parameter influencing the liquid-liquid phase separation. Main results include the following: the polymers weight ratio was fundamental in dictating the colloids surface charge, whereas chitosan physical-chemical features influenced the dimension and homogeneity of colloids. This contribution presents additional understanding of the complex coacervation between these two oppositely charged polysaccharides, with the potential translation of present system in food and biomedical sectors.

On the Formation and Stability of Chitosan/Hyaluronan-Based Complex Coacervates

This contribution is aimed at extending our previous findings on the formation and stability of chitosan/hyaluronan-based complex coacervates. Colloids are herewith formed by harnessing electrostatic interactions between the two polyelectrolytes. The presence of tiny amounts of the multivalent anion tripolyphosphate (TPP) in the protocol synthesis serves as an adjuvant “point-like” cross-linker for chitosan. Hydrochloride chitosans at different viscosity average molar mass, Mv¯, in the range 10,000–400,000 g/mol, and fraction of acetylated units, F_A, (0.16, 0.46 and 0.63) were selected to fabricate a large library of formulations. Concepts such as coacervate size, surface charge and homogeneity in relation to chitosan variables are herein disclosed. The stability of coacervates in Phosphate Buffered Saline (PBS) was verified by means of scattering techniques, i.e., Dynamic Light Scattering (DLS) and Small-Angle X-ray Scattering (SAXS). The conclusions from this set of experiments are the following: (i) a subtle equilibrium between chitosan F_A and Mv¯ does exist in ensuring colloidal stability; (ii) once diluted in PBS, osmotic swelling-driven forces trigger the enlargement of the polymeric mesh with an ensuing increase of coacervate size and porosity.

Dialdehyde-β-cyclodextrin-crosslinked carboxymethyl chitosan hydrogel for drug release

A simple method was proposed for preparing the dialdehyde-β-cyclodextrin (DA-β-CD) cross-linked carboxymethyl chitosan (CMCS) hydrogels for drug delivery. DA-β-CD was yielded from the sodium periodate oxidation of β-CD. Phenolphthalein (PhP) was adopted as a model drug to study the drug loading and releasing properties of the obtained hydrogels. The results show that the ability of the hydrogel to load drug is affected by the aldehyde content of DA-β-CD. The inclusion constant of DA-β-CD toward PhP is lower than that of the original β-CD and decreased with the rising of the aldehyde content. An increased cross-linking degree between DA-β-CD and CMCS slows the PhP release to some extent. In comparison with glyoxal/CMCS, DA-β-CD/CMCS presents better PhP release properties. Only 19.2 % of PhP loaded in glyoxal/CMCS was released within 24 h. Half of PhP loaded in DA-β-CD/CMCS was released in 2 h and about 90 % was released within 12 h.

Calcium Phosphate Incorporated Bacterial Cellulose-Polyvinylpyrrolidone Based Hydrogel Scaffold: Structural Property and Cell Viability Study for Bone Regeneration Application

This work focuses on the analysis of structural and functional properties of calcium phosphate (CaP) incorporated bacterial cellulose (BC)-polyvinylpyrrolidone (PVP) based hydrogel scaffolds referred to as “CaP/BC-PVP”. CaP is incorporated in the scaffolds in the form of hydroxyapatite (HA) and β-tricalcium phosphate (β-TCP) in different concentrations (β-TCP: HA (w/w) = 20:80, 40:60, and 50:50). The scaffolds were characterized on the basis of porosity, thermal, biodegradation, mechanical, and cell viability/cytocompatibility properties. The structural properties of all the hydrogel scaffolds show significant porosity. The biodegradation of “CaP/BC-PVP” scaffold was evaluated following hydrolytic degradation. Weight loss profile, pH change, scanning electron microscopy (SEM), and Fourier Transform Infrared Spectroscopy (FTIR) study confirm the significant degradability of the scaffolds. It is observed that a 50:50_CaP/BC-PVP scaffold has the highest degree of degradation. On the other hand, the compressive strengths of CaP/BC-PVP hydrogel scaffolds are found between 0.21 to 0.31 MPa, which is comparable with the human trabecular bone. The cell viability study is performed with a human osteosarcoma Saos-2 cell line, where significant cell viability is observed in all the hydrogel scaffolds. This indicated their ability to facilitate cell growth and cell proliferation. Considering all these substantial properties, CaP/BC-PVP hydrogel scaffolds can be suggested for detailed investigation in the context of bone regeneration application.

Chitosan Acetylation Degree Influences the Physical Properties of Polysaccharide Nanoparticles: Implication for the Innate Immune Cells Response

The aim of the present contribution is twofold as it reports (i) on the role played by chitosan acetylation degree for the stability of nanoparticles (NPs) formed with hyaluronan and (ii) on the effect of the interaction of such NPs with immune cells. Chitosans with similar viscosity-average molecular weight, [Formula: see text], (i.e., 200 000) and different fractions of acetylated units ( F_A) together with low-molecular-weight hyaluronan were chosen for developing a select library of formulations via electrostatic complex coacervation. The resulting NPs were analyzed in terms of size, polydispersity, surface charge, and stability in physiological-mimicked media by dynamic light scattering. Only medium acetylated chitosan ( F_A = 0.16) guaranteed the stability of NPs. To explore the effect of NPs interaction with immune cells, the release of proinflammatory cytokines and the reactive oxygen species production by human macrophages and neutrophils, respectively, were evaluated. Strikingly, a structure-function relationship emerged, showing that NPs made of chitosans with F_A = 0.02, 0.25, 0.46, and 0.63 manifested a proinflammatory activity, linked to the instability of the system. Conversely, NPs made of chitosan with F_A = 0.16 neither modified the functional response of macrophages nor that of neutrophils. Of note, such NPs were found to possess additional properties potentially advantageous in applications such as delivery of therapeutics to target inflamed sites: (i) they are devoid of cytotoxic effects, (ii) they avoid engulfment during the early stage of interaction with macrophages, and (iii) they are muco-adhesive, thereby providing for site-specificity and long-residence effects.

Fabrication of Microcapsules by the Combination of Biomass Porous Carbon and Polydopamine for Dual Self-Healing Hydrogels

Artificial development of smart materials from agricultural waste or food residues is particularly desirable for green chemistry. In this paper, dual-network self-healing hydrogels were successfully fabricated by using functional microcapsules. These microcapsules were established by biomass porous carbon (PC) after recycling of apple residues. Glutaraldehyde (GA) as the healing agent was embedded in the porous carbon, and the outer surface was coated with polydopamine (PDA). After the microcapsules were added, modifying guar gum-type hydrogels were successfully obtained with dual self-healing performance by the combination of a healing agent and metal-ligand coordination. The self-healing efficiency was about 89.9% from the tension test, and the fracture strength was measured as 7.68 MPa. These results not only highlight a new idea for the utilization of apple residues but also provide a new method for the preparation of excellent self-healing hydrogels.

A shear-thinning adhesive hydrogel reinforced by photo-initiated crosslinking as a fit-to-shape tissue sealant

A fit-to-shape sealant enhanced by photo-initiated crosslinking treated a wound with a nonplanar complex contour rapidly and effectively.

Nanoparticle-Patterned Multicompartmental Chitosan Capsules for Oral Delivery of Oligonucleotides

Orally administered antisense therapy has been introduced as an effective approach for treating cancer in the gastrointestinal tract. However, its practical application has been limited by the instability of oligonucleotides and their inefficient delivery. To overcome these problems, we synthesized size-dependent, oligonucleotide nanoparticle-patterned chitosan/phytic acid (ODN/CS/PA) capsules with protective shields via a three-step process of self-assembly, nanoparticle encapsulation, and shell formation. The multicompartmental capsule size and oligonucleotide nanoparticle-loading pattern were controlled by applying different potentials during the electrostatic extrusion process used for nanoparticle encapsulation. Over 95% of encapsulated oligonucleotides were protected from nuclease digestion (DNase I) and, depending on their size, showed 40-75% protection against simulated gastric fluid. Their controlled release from capsules correlated with the cellular delivery of released nanoparticles and the inhibition of protein expression in cancer cells. Specifically, large capsules showed approximately 32-fold greater delivery to cancer cells than nonencapsulated nanoparticles. We also confirmed delivery of oligonucleotide nanoparticles to the small intestine and colon of rats following oral administration. These findings demonstrate that the multicompartmental ODN/CS/PA capsules can facilitate efficient oral delivery of oligonucleotides for cancer treatment.