Removal of organic water pollutant using magnetite nanomaterials embedded with ionic copolymers of 2-acrylamido-2-methylpropane sodium sulfonate cryogels

Optimization studies of BTX removal by magnetite coated oleic acid obtained from microwave-assisted synthesis using response surface methodology

Benzene, toluene and xylene (BTX) are volatile organic compounds released into the environment, that require urgent removal to avoid adverse health effects. In this work, the modelling and optimization of the preparation factors for magnetite coated oleic acid (MNP-OA) composite from microwave synthesis using response surface methodology were conducted to maximize BTX removal, and iron content. The influence of five crucial preparation variables: the Fe^3+/Fe²⁺ solution volumes, microwave power, volume of ammonia water (VAW), reaction time and volume of oleic acid (VOA) on the iron content (% Fe), and BTX adsorption capacity were investigated. The analysis of variance results revealed that VOA and VAW were the most influential factors for high % Fe content, and improved BTX removal. The % Fe, and BTX adsorption capacity for MNP-OA composite at optimized experimental conditions were estimated to be 85.57%, 90.02 mg/g (benzene), 90.07 mg/g (toluene), and 96.31 mg/g (xylene).

Sustainable green nanoadsorbents for remediation of pharmaceuticals from water and wastewater: A critical review

In the last three decades, pharmaceutical research has increased tremendously to offer safe and healthy life. However, the high consumption of these harmful drugs has risen devastating impact on ecosystems. Therefore, it is worldwide paramount concern to effectively clean pharmaceuticals contaminated water streams to ensure safer environment and healthier life. Nanotechnology enables to produce new, high-technical material, such as membranes, adsorbent, nano-catalysts, functional surfaces, coverages and reagents for more effective water and wastewater cleanup processes. Nevertheless, nano-sorbent materials are regarded the most appropriate treatment technology for water and wastewater because of their facile application and a large number of adsorbents. Several conventional techniques have been operational for domestic wastewater treatment but are inefficient for pharmaceuticals removal. Alternatively, adsorption techniques have played a pivotal role in water and wastewater treatment for a long, but their rise in attraction is proportional with the continuous emergence of new micropollutants in the aquatic environment and new discoveries of sustainable and low-cost adsorbents. Recently, advancements in adsorption technique for wastewater treatment through nanoadsorbents has greatly increased due to its low production cost, sustainability, better physicochemical properties and high removal performance for pharmaceuticals. Herein, this review critically evaluates the performance of sustainable green nanoadsorbent for the remediation of pharmaceutical pollutants from water. The influential sorption parameters and interaction mechanism are also discussed. Moreover, the future prospects of nanoadsorbents for the remediation of pharmaceuticals are also presented.

Nanobiocatalysts and photocatalyst in dye degradation

In the modern era, the world today is in a mission for a new method of environmental bioremediation in faltering the damage, especially in polluted water. Recently, the global direction is regulated toward an alteration from the usual chemical-based methods to a supplementary ecofriendly green alternative. In this perspective, biocatalysts are appreciated as an economical and clean substitute which was meant to catalyze degradation of unmanageable chemicals in a rapid, green and ecologically stable manner. Among the various sources of water pollution, the textile manufacturing industries were thought to be a major dispute due to release of effluents in natural water bodies such as rivers. Other industries like paper, pulp and tannery pharmaceutical industries were also responsible in contaminating the water bodies. Photocatalysis was considered as an auspicious method for the removal of dyes from the natural bodies, specifically those with hard organic compounds; using enzymes. The present chapter briefly emphasizes on the effective methods used for degradation of dye effluents; their importance of photocatalytic and biocatalytic solution to the current environmental difficulties and future opportunities are discussed.

Magnetic Nanoparticle Composites: Synergistic Effects and Applications

Composite materials are made from two or more constituent materials with distinct physical or chemical properties that, when combined, produce a material with characteristics which are at least to some degree different from its individual components. Nanocomposite materials are composed of different materials of which at least one has nanoscale dimensions. Common types of nanocomposites consist of a combination of two different elements, with a nanoparticle that is linked to, or surrounded by, another organic or inorganic material, for example in a core-shell or heterostructure configuration. A general family of nanoparticle composites concerns the coating of a nanoscale material by a polymer, SiO2 or carbon. Other materials, such as graphene or graphene oxide (GO), are used as supports forming composites when nanoscale materials are deposited onto them. In this Review we focus on magnetic nanocomposites, describing their synthetic methods, physical properties and applications. Several types of nanocomposites are presented, according to their composition, morphology or surface functionalization. Their applications are largely due to the synergistic effects that appear thanks to the co-existence of two different materials and to their interface, resulting in properties often better than those of their single-phase components. Applications discussed concern magnetically separable catalysts, water treatment, diagnostics-sensing and biomedicine.

Methylene Blue Catalytic Degradation Using Silver and Magnetite Nanoparticles Functionalized with a Poly(ionic liquid) Based on Quaternized Dialkylethanolamine with 2-Acrylamido-2-methylpropane Sulfonate-co-Vinylpyrrolidone

Catalytic degradation of organic water pollutants has emerged as a cost- and energy-effective technique to treat wastewater. In this work, new silver and magnetite nanoparticles (NPs) were prepared with a protic poly(ionic liquid) (PIL) based on a quaternized diethylethanolamine cation combined with 2-acrylamido-2-methylpropane sulfonate-co-vinylpyrrolidone (QAMPSA/VP) as a capping and a reducing agent. The morphology, particle size, surface charge, thermal stability, and magnetic properties of QAMPS/VP-Ag and Fe₃O₄ NPs were investigated to determine the efficiency of the PIL as a reducing and a capping agent to protect the produced NPs from oxidation or thermal degradation. The activation energy, enthalpy, and entropy of the catalytic degradation of the cationic methylene blue (MB) dye in the presence of QAMPS/VP-Ag and Fe₃O₄ NPs were determined. The data elucidated that MB was completely degraded in 8 min in the presence of QAMPS/VP-Fe₃O₄ NPs as a Fenton oxidation catalyst. Moreover, their good magnetic properties allowed their easy separation and reuse for five cycles without losing their magnetic or catalytic properties.

Antimicrobial Activity of Hybrids Terpolymers Based on Magnetite Hydrogel Nanocomposites

In the past few years, the development of hydrogel properties has led to the emergence of nanocomposite hydrogels that have unique properties that allow them to be used in various different fields and applications such as drug delivery, adsorption soil containing, tissue engineering, wound dressing, and especially antimicrobial applications. Thus, this study was conducted in order to fabricate a novel crosslinked terpolymer nanocomposite hydrogel using the free radical copolymerization method based on the usage of 2-acrylamido-2-methylpropane sulfonic acid (AMPS), acrylamide (AAm), acrylonitrile (AN), and acrylic acid (AA) monomers and iron oxide (Fe3O4) magnetic nanoparticles and using benzoyl peroxide as an initiator and ethylene glycol dimethacrylate (EGDMA) as a crosslinker. The structure of the synthesized composite was confirmed using Fourier transform infrared (FTIR) spectroscopy and x-ray powder diffraction (XRD) measurements. Furthermore, the surface morphology and the magnetic nanoparticle distributions were determined by scanning electron microscopy (SEM) measurement. In addition, the swelling capacity of the hydrogel nanocomposite was measured using the swelling test. Lastly, the efficiency of the produced composite was evaluated as an antimicrobial agent for Gram-positive and Gram-negative bacterial strains and a fungal strain.

Hybrid Ionic Silver and Magnetite Microgels Nanocomposites for Efficient Removal of Methylene Blue

The ionic crosslinked 2-acrylamido-2-methylpropane sulfonic acid-co-acrylic acid hydrogel, AMPS/AA and its Ag and Fe₃O₄ composites were synthesized using an in situ technique. The surface charge, particle sizes, morphology, and thermal stability of the prepared AMPS/AA-Ag and AMPS/AA-Fe₃O₄ composites were evaluated using different analytical techniques and their adsorption characteristics were evaluated to remove the methylene blue cationic dye, MB, from their aqueous solutions at optimum conditions. Also, the same monomers were used to synthesize AMPS/AA microgel and its Ag and Fe₃O₄ nanocomposites, which were synthesized using the same technique. The AMPS/AA-Fe₃O₄ nanocomposite was selected as conventional iron-supported catalyst due to the presence of both Fe(II) and Fe(III) species besides its magnetic properties that allow their easy, fast, and inexpensive separation from the aqueous solution. It was then evaluated as a heterogeneous catalyst for complete MB degradation from aqueous solution by heterogeneous Fenton oxidation. It achieved a high rate of degradation, degrading 100 mg L^-1 of MB during a short time of 35 min as compared with the reported literature.

Application of New Sodium Vinyl Sulfonate⁻co-2-Acrylamido-2-me[thylpropane Sulfonic Acid Sodium Salt-Magnetite Cryogel Nanocomposites for Fast Methylene Blue Removal from Industrial Waste Water

Inorganic nanoparticles based on magnetite were used to improve the mechanical, thermal, and magnetic properties of microporous cryogel polymer composites. Here we report the synthesis of microporous cryogel based on the crosslinked sodium vinyl sulfonate (Na-VS) and 2-acrylamido-2-methylpropane sulfonic acid sodium salt (Na-AMPS). The magnetite nanoparticles were incorporated into Na-VS/Na-AMPS cryogel networks either during its crosslinking polymerization or by the in-situ technique after its crosslinking. The morphology, particle sizes, thermal stability, and magnetite contents of Na-VS/Na-AMPS cryogel and its magnetite composite were investigated. The prepared Na-VS/Na-AMPS cryogel and its magnetite composite were used as adsorbents for methylene blue (MB) cationic dye using optimum conditions. The magnetite Na-VS/Na-AMPS cryogel composite prepared by in-situ technique achieved the best adsorption MB removal capacity for 7 cycles among the other adsorbents via chemical adsorption mechanism at room temperature.