Drug penetration and metabolism in 3D cell cultures treated in a 3D printed fluidic device: assessment of irinotecan via MALDI imaging mass spectrometry

Continuous flow delivery system for the perfusion of scaffold-based 3D cultures

The paper-based culture platform developed by Whitesides readily incorporates tissue-like structures into laboratories with established workflows that rely on monolayer cultures. Cell-laden hydrogels are deposited in these porous scaffolds with micropipettes; these scaffolds support the thin gel slabs, allowing them to be evaluated individually or stacked into thick constructs. The paper-based culture platform has inspired many basic and translational studies, each exploring how readily accessible materials can generate complex structures that mimic aspects of tissues in vivo. Many of these examples have relied on static culture conditions, which result in diffusion-limited environments and cells experiencing pericellular hypoxia. Perfusion-based systems can alleviate pericellular hypoxia and other cell stresses by continually exposing the cells to fresh medium. These perfusion systems are common in microfluidic and organ-on-chip devices supporting cells as monolayer cultures or as 3D constructs. Here, we introduce a continuous flow delivery system, which uses parts readily produced with 3D printing to provide a self-contained culture platform in which cells in paper or other scaffolds are exposed to fresh (flowing) medium. We demonstrate the utility of this device with examples of cells maintained in single cell-laden scaffolds, stacks of cell-laden scaffolds, and scaffolds that contain monolayers of endothelial cells. These demonstrations highlight some possible experimental questions that can be enabled with readily accessible culture materials and a perfusion-based device that can be readily fabricated.

Gas-Phase Fractionation Data-Independent Acquisition Analysis of 3D Cocultured Spheroid Tumor Model Reveals Altered Translational Processes and Signaling Using Proteomics

Colorectal cancer (CRC) contains considerable heterogeneity; therefore, models of the disease must also reflect the multifarious components. Compared to traditional 2D models, 3D cellular models, such as tumor spheroids, have the utility to determine the drug efficacy of potential therapeutics. Monoculture spheroids are well-known to recapitulate gene expression, cell signaling, and pathophysiological gradients of avascularized tumors. However, they fail to mimic the stromal cell influence present in CRC, which is known to perturb drug efficacy and is associated with metastatic, late-stage colorectal cancer. This study seeks to develop a cocultured spheroid model using carcinoma and noncancerous fibroblast cells. We characterized the proteomic profile of cocultured spheroids in comparison to monocultured spheroids using data-independent acquisition with gas-phase fractionation. Specifically, we determined that proteomic differences related to translation and mTOR signaling are significantly increased in cocultured spheroids compared to monocultured spheroids. Proteins related to fibroblast function, such as exocytosis of coated vesicles and secretion of growth factors, were significantly differentially expressed in the cocultured spheroids. Finally, we compared the proteomic profiles of both the monocultured and cocultured spheroids against a publicly available data set derived from solid CRC tumors. We found that the proteome of the cocultured spheroids more closely resembles that of the patient samples, indicating their potential as tumor mimics.

Penetration Profiles of Four Topical Antifungals in Mycotic Human Toenails Quantified by Matrix-Assisted Laser Desorption Ionization-Fourier Transform Ion Cyclotron Resonance Imaging

INTRODUCTION

Onychomycosis is a fungal infection of the nails that can be challenging to treat. Here, matrix-assisted laser desorption ionization-Fourier transform ion cyclotron resonance (MALDI-FTICR) imaging was applied to the quantitative analysis of the penetration profile of the antifungal compound, amorolfine, in human mycotic toenails. The amorolfine profile was compared with those of three other antifungals, ciclopirox, naftifine, and tioconazole.

METHODS

Antifungal compounds (amorolfine 5% lacquer, ciclopirox 8% lacquer, naftifine 1% solution, and tioconazole 28% solution) were applied to mycotic nails (n = 42). Nail sections were prepared, and MALDI-FTICR analysis was performed on the sections at a spatial resolution of 70 μm to compare the distribution profiles. Based on the minimum inhibitory concentrations of the four test compounds needed to kill 90% (MIC90) of the fungal organism, Trichophyton rubrum, the fold differences between the MIC90 and the antifungal concentrations in the nails (termed the multiplicity of the MIC90) were calculated for each.

RESULTS

The penetration profiles indicated higher concentrations of amorolfine and ciclopirox in the deeper layers of the nails 3 h after treatment, compared with naftifine and tioconazole. The mean concentrations across the entire nail sections at 3 h were significantly different among the four antifungals: amorolfine, 2.46 mM; ciclopirox, 0.95 mM; naftifine, 0.63 mM; and tioconazole, 1.36 mM (p = 0.016; n = 8 per compound). The median multiplicity of the MIC90 at 3 h was 191-fold for amorolfine, tenfold for ciclopirox, 52-fold for naftifine, and 208-fold for tioconazole.

CONCLUSION

In this study, MALDI-FTICR was successfully applied to the quantitative analysis of antifungal distribution in human mycotic nails. The findings suggest that amorolfine penetrates deeper layers of the nail and accumulates at concentrations far exceeding the MIC needed to exert antimycotic activity.

Minocycline and photodynamic priming significantly improve chemotherapy efficacy in heterotypic spheroids of pancreatic ductal adenocarcinoma

The prognosis for patients with advanced-stage pancreatic ductal adenocarcinoma (PDAC) remains dismal. It is generally accepted that combination cancer therapies offer the most promise, such as Folforinox, despite their associated high toxicity. This study addresses the issue of chemoresistance by introducing a complementary dual priming approach to attenuate the DNA repair mechanism and to improve the efficacy of a type 1 topoisomerase (Top1) inhibitor. The result is a regimen that integrates drug-repurposing and nanotechnology using 3 clinically relevant FDA-approved agents (1) Top1 inhibitor (irinotecan) at subcytotoxic doses (2) benzoporphyrin derivative (BPD) as a photoactive molecule for photodynamic priming (PDP) to improve the delivery of irinotecan within the cancer cell and (3) minocycline priming (MNP) to modulate DNA repair enzyme Tdp1 (tyrosyl-DNA phosphodiesterase) activity. We demonstrate in heterotypic 3D cancer models that incorporate cancer cells and pancreatic cancer-associated fibroblasts that simultaneous targeting of Tdp1 and Top1 were significantly more effective by employing MNP and photoactivatable multi-inhibitor liposomes encapsulating BPD and irinotecan compared to monotherapies or a cocktail of dual or triple-agents. These data are encouraging and warrant further work in appropriate animal models to evolve improved therapeutic regimens.

Advancing rare cancer research by MALDI mass spectrometry imaging: Applications, challenges, and future perspectives in sarcoma

MALDI mass spectrometry imaging (MALDI imaging) uniquely advances cancer research, by measuring spatial distribution of endogenous and exogenous molecules directly from tissue sections. These molecular maps provide valuable insights into basic and translational cancer research, including tumor biology, tumor microenvironment, biomarker identification, drug treatment, and patient stratification. Despite its advantages, MALDI imaging is underutilized in studying rare cancers. Sarcomas, a group of malignant mesenchymal tumors, pose unique challenges in medical research due to their complex heterogeneity and low incidence, resulting in understudied subtypes with suboptimal management and outcomes. In this review, we explore the applicability of MALDI imaging in sarcoma research, showcasing its value in understanding this highly heterogeneous and challenging rare cancer. We summarize all MALDI imaging studies in sarcoma to date, highlight their impact on key research fields, including molecular signatures, cancer heterogeneity, and drug studies. We address specific challenges encountered when employing MALDI imaging for sarcomas, and propose solutions, such as using formalin-fixed paraffin-embedded tissues, and multiplexed experiments, and considerations for multi-site studies and digital data sharing practices. Through this review, we aim to spark collaboration between MALDI imaging researchers and clinical colleagues, to deploy the unique capabilities of MALDI imaging in the context of sarcoma.

Quantitative mass spectrometry imaging: therapeutics & biomolecules

Mass spectrometry imaging (MSI) has become increasingly utilized in the analysis of biological molecules. MSI grants the ability to spatially map thousands of molecules within one experimental run in a label-free manner. While MSI is considered by most to be a qualitative method, recent advancements in instrumentation, sample preparation, and development of standards has made quantitative MSI (qMSI) more common. In this feature article, we present a tailored review of recent advancements in qMSI of therapeutics and biomolecules such as lipids and peptides/proteins. We also provide detailed experimental considerations for conducting qMSI studies on biological samples, aiming to advance the methodology.

A Guide to MALDI Imaging Mass Spectrometry for Tissues

Imaging mass spectrometry is a well-established technology that can easily and succinctly communicate the spatial localization of molecules within samples. This review communicates the recent advances in the field, with a specific focus on matrix-assisted laser desorption/ionization (MALDI) imaging mass spectrometry (IMS) applied on tissues. The general sample preparation strategies for different analyte classes are explored, including special considerations for sample types (fresh frozen or formalin-fixed,) strategies for various analytes (lipids, metabolites, proteins, peptides, and glycans) and how multimodal imaging strategies can leverage the strengths of each approach is mentioned. This work explores appropriate experimental design approaches and standardization of processes needed for successful studies, as well as the various data analysis platforms available to analyze data and their strengths. The review concludes with applications of imaging mass spectrometry in various fields, with a focus on medical research, and some examples from plant biology and microbe metabolism are mentioned, to illustrate the breadth and depth of MALDI IMS.

Luciferase Expressing Preclinical Model Systems Representing the Different Molecular Subtypes of Colorectal Cancer

Colorectal cancer (CRC) is a heterogeneous disease. More insight into the biological diversity of CRC is needed to improve therapeutic outcomes. Established CRC cell lines are frequently used and were shown to be representative models of the main subtypes of CRC at the genomic and transcriptomic level. In the present work, we established stable, luciferase expressing derivatives from 10 well-established CRC cell lines, generated spheroids and subcutaneous xenograft tumors in nude mice, and performed comparative characterization of these model systems. Transcriptomic analyses revealed the close relation of cell lines with their derived spheroids and xenograft tumors. The preclinical model systems clustered with patient tumor samples when compared to normal tissue thereby confirming that cell-line-based tumor models retain specific characteristics of primary tumors. Xenografts showed different differentiation patterns and bioluminescence imaging revealed metastatic spread to the lungs. In addition, the models were classified according to the CMS classification system, with further sub-classification according to the recently identified two intrinsic epithelial tumor cell states of CRC, iCMS2 and iCMS3. The combined data showed that regarding primary tumor characteristics, 3D-spheroid cultures resemble xenografts more closely than 2D-cultured cells do. Furthermore, we set up a bioluminescence-based spheroid cytotoxicity assay in order to be able to perform dose-response relationship studies in analogy to typical monolayer assays. Applying the established assay, we studied the efficacy of oxaliplatin. Seven of the ten used cell lines showed a significant reduction in the response to oxaliplatin in the 3D-spheroid model compared to the 2D-monolayer model. Therapy studies in selected xenograft models confirmed the response or lack of response to oxaliplatin treatment. Analyses of differentially expressed genes in these models identified CAV1 as a possible marker of oxaliplatin resistance. In conclusion, we established a combined 2D/3D, in vitro/in vivo model system representing the heterogeneity of CRC, which can be used in preclinical research applications.

Evaluating the Pharmacokinetics and Pharmacodynamics of Chemotherapeutics within a Spatial SILAC-Labeled Spheroid Model System

Tumors have considerable cellular heterogeneity that is impossible to explore with simple cell cultures. Spheroid cultures contain pathophysiological and chemical gradients similar to in vivo tumors and show complex responses to therapeutics, similar to a tumor. Using pulsed isotopic labels, we demonstrate the pronounced differential response of the proteome to the drug Regorafenib, a multikinase inhibitor, in HCT 116 spheroids. Regorafenib treatment of outer spheroids inhibits proteins involved in critical pathways such as mTOR signaling, extracellular signal-regulated kinase (ERK)/mitogen-activated protein kinase (MAPK) signaling, and colorectal cancer metastasis signaling, resulting in decreased proliferation and cellular apoptosis. By contrast, analysis of the treated core cells shows upregulation of MAPK1 and KRAS, possibly implicating drug resistance within these late apoptotic cells. Thus, pulsed isotopic labeling enables evaluation of the distinct proteomic responses for cells residing in the different chemical microenvironments of the spheroid. This platform promises great utility in assisting researchers' predictions of pharmacodynamic therapeutic responses within complex tumors.

Desorption electrospray ionization and matrix-assisted laser desorption/ionization as imaging approaches for biological samples analysis

The imaging of biological tissues can offer valuable information about the sample composition, which improves the understanding of analyte distribution in such complex samples. Different approaches using mass spectrometry imaging (MSI), also known as imaging mass spectrometry (IMS), enabled the visualization of the distribution of numerous metabolites, drugs, lipids, and glycans in biological samples. The high sensitivity and multiple analyte evaluation/visualization in a single sample provided by MSI methods lead to various advantages and overcome drawbacks of classical microscopy techniques. In this context, the application of MSI methods, such as desorption electrospray ionization-MSI (DESI-MSI) and matrix-assisted laser desorption/ionization-MSI (MALDI-MSI), has significantly contributed to this field. This review discusses the evaluation of exogenous and endogenous molecules in biological samples using DESI and MALDI imaging. It offers rare technical insights not commonly found in the literature (scanning speed and geometric parameters), making it a comprehensive guide for applying these techniques step-by-step. Furthermore, we provide an in-depth discussion of recent research findings on using these methods to study biological tissues.

Hybrid-DIA: intelligent data acquisition integrates targeted and discovery proteomics to analyze phospho-signaling in single spheroids

Achieving sufficient coverage of regulatory phosphorylation sites by mass spectrometry (MS)-based phosphoproteomics for signaling pathway reconstitution is challenging, especially when analyzing tiny sample amounts. To address this, we present a hybrid data-independent acquisition (DIA) strategy (hybrid-DIA) that combines targeted and discovery proteomics through an Application Programming Interface (API) to dynamically intercalate DIA scans with accurate triggering of multiplexed tandem mass spectrometry (MSx) scans of predefined (phospho)peptide targets. By spiking-in heavy stable isotope labeled phosphopeptide standards covering seven major signaling pathways, we benchmark hybrid-DIA against state-of-the-art targeted MS methods (i.e., SureQuant) using EGF-stimulated HeLa cells and find the quantitative accuracy and sensitivity to be comparable while hybrid-DIA also profiles the global phosphoproteome. To demonstrate the robustness, sensitivity, and biomedical potential of hybrid-DIA, we profile chemotherapeutic agents in single colon carcinoma multicellular spheroids and evaluate the phospho-signaling difference of cancer cells in 2D vs 3D culture.

Three-Dimensional In Vitro Cell Culture Models for Efficient Drug Discovery: Progress So Far and Future Prospects

Despite tremendous advancements in technologies and resources, drug discovery still remains a tedious and expensive process. Though most cells are cultured using 2D monolayer cultures, due to lack of specificity, biochemical incompatibility, and cell-to-cell/matrix communications, they often lag behind in the race of modern drug discovery. There exists compelling evidence that 3D cell culture models are quite promising and advantageous in mimicking in vivo conditions. It is anticipated that these 3D cell culture methods will bridge the translation of data from 2D cell culture to animal models. Although 3D technologies have been adopted widely these days, they still have certain challenges associated with them, such as the maintenance of a micro-tissue environment similar to in vivo models and a lack of reproducibility. However, newer 3D cell culture models are able to bypass these issues to a maximum extent. This review summarizes the basic principles of 3D cell culture approaches and emphasizes different 3D techniques such as hydrogels, spheroids, microfluidic devices, organoids, and 3D bioprinting methods. Besides the progress made so far in 3D cell culture systems, the article emphasizes the various challenges associated with these models and their potential role in drug repositioning, including perspectives from the COVID-19 pandemic.

Mass recalibration for desorption electrospray ionization mass spectrometry imaging using endogenous reference ions

BACKGROUND

Mass spectrometry imaging (MSI) data often consist of tens of thousands of mass spectra collected from a sample surface. During the time necessary to perform a single acquisition, it is likely that uncontrollable factors alter the validity of the initial mass calibration of the instrument, resulting in mass errors of magnitude significantly larger than their theoretical values. This phenomenon has a two-fold detrimental effect: (a) it reduces the ability to interpret the results based on the observed signals, (b) it can affect the quality of the observed signal spatial distributions.

RESULTS

We present a post-acquisition computational method capable of reducing the observed mass drift by up to 60 ppm in biological samples, exploiting the presence of typical molecules with a known mass-to-charge ratio. The procedure, tested on time-of-flight and Orbitrap mass spectrometry analyzers interfaced to a desorption electrospray ionization (DESI) source, improves the molecular annotation quality and the spatial distributions of the detected ions.

CONCLUSION

The presented method represents a robust and accurate tool for performing post-acquisition mass recalibration of DESI-MSI datasets and can help to increase the reliability of the molecular assignment and the data quality.

Mass recalibration for desorption electrospray ionization mass spectrometry imaging using endogenous reference ions

BACKGROUND

Mass spectrometry imaging (MSI) data often consist of tens of thousands of mass spectra collected from a sample surface. During the time necessary to perform a single acquisition, it is likely that uncontrollable factors alter the validity of the initial mass calibration of the instrument, resulting in mass errors of magnitude significantly larger than their theoretical values. This phenomenon has a two-fold detrimental effect: (a) it reduces the ability to interpret the results based on the observed signals, (b) it can affect the quality of the observed signal spatial distributions.

RESULTS

We present a post-acquisition computational method capable of reducing the observed mass drift by up to 60 ppm in biological samples, exploiting the presence of typical molecules with a known mass-to-charge ratio. The procedure, tested on time-of-flight and Orbitrap mass spectrometry analyzers interfaced to a desorption electrospray ionization (DESI) source, improves the molecular annotation quality and the spatial distributions of the detected ions.

CONCLUSION

The presented method represents a robust and accurate tool for performing post-acquisition mass recalibration of DESI-MSI datasets and can help to increase the reliability of the molecular assignment and the data quality.

Automated Assessment of Cancer Drug Efficacy On Breast Tumor Spheroids in Aggrewell™400 Plates Using Image Cytometry

Tumor spheroid models have proven useful in the study of cancer cell responses to chemotherapeutic compounds by more closely mimicking the 3-dimensional nature of tumors in situ. Their advantages are often offset, however, by protocols that are long, complicated, and expensive. Efforts continue for the development of high-throughput assays that combine the advantages of 3D models with the convenience and simplicity of traditional 2D monolayer methods. Herein, we describe the development of a breast cancer spheroid image cytometry assay using T47D cells in Aggrewell™400 spheroid plates. Using the Celigo^® automated imaging system, we developed a method to image and individually track thousands of spheroids within the Aggrewell™400 microwell plate over time. We demonstrate the use of calcein AM and propidium iodide staining to study the effects of known anti-cancer drugs Doxorubicin, Everolimus, Gemcitabine, Metformin, Paclitaxel and Tamoxifen. We use the image cytometry results to quantify the fluorescence of calcein AM and PI as well as spheroid size in a dose dependent manner for each of the drugs. We observe a dose-dependent reduction in spheroid size and find that it correlates well with the viability obtained from the CellTiter96^® endpoint assay. The image cytometry method we demonstrate is a convenient and high-throughput drug-response assay for breast cancer spheroids under 400 μm in diameter, and may lay a foundation for investigating other three-dimensional spheroids, organoids, and tissue samples.

The New Frontier of Three-Dimensional Culture Models to Scale-Up Cancer Research

In vitro cancer research models require the utmost accuracy and precision to effectively investigate physiological pathways and mechanisms, as well as test the therapeutic efficacy of anticancer drugs. Although two-dimensional (2D) cell culture models have been the traditional hallmark of cancer research, increasing evidence suggests 2D tumor models cannot accurately recapitulate complex aspects of tumor cells and drug responses. Three-dimensional (3D) cell cultures, however, are more physiologically relevant in oncology as they model the cancer network and microenvironment better, allowing for development and assessment of natural products and other anticancer drugs. The present review outlines unprecedented ways in which multicellular spheroid models, organoid models, hydrogel models, microfluidic devices, microfiber scaffold models, and tissue-engineered scaffold models are used in this research. The future of cancer research lies within 3D cell cultures, and as this approach improves, cancer research will continue to advance.

3D Cell Culture Models as Recapitulators of the Tumor Microenvironment for the Screening of Anti-Cancer Drugs

Today, innovative three-dimensional (3D) cell culture models have been proposed as viable and biomimetic alternatives for initial drug screening, allowing the improvement of the efficiency of drug development. These models are gaining popularity, given their ability to reproduce key aspects of the tumor microenvironment, concerning the 3D tumor architecture as well as the interactions of tumor cells with the extracellular matrix and surrounding non-tumor cells. The development of accurate 3D models may become beneficial to decrease the use of laboratory animals in scientific research, in accordance with the European Union's regulation on the 3R rule (Replacement, Reduction, Refinement). This review focuses on the impact of 3D cell culture models on cancer research, discussing their advantages, limitations, and compatibility with high-throughput screenings and automated systems. An insight is also given on the adequacy of the available readouts for the interpretation of the data obtained from the 3D cell culture models. Importantly, we also emphasize the need for the incorporation of additional and complementary microenvironment elements on the design of 3D cell culture models, towards improved predictive value of drug efficacy.

Models for measuring metabolic chemical changes in the metastasis of high grade serous ovarian cancer: fallopian tube, ovary, and omentum

Ovarian cancer (OC) is the most lethal gynecologic malignancy and high grade serous ovarian cancer (HGSOC) is the most common and deadly subtype, accounting for 70-80% of OC deaths. HGSOC has a distinct pattern of metastasis as many believe it originates in the fallopian tube and then it metastasizes first to the ovary, and later to the adipose-rich omentum. Metabolomics has been heavily utilized to investigate metabolite changes in HGSOC tumors and metastasis. Generally, metabolomics studies have traditionally been applied to biospecimens from patients or animal models; a number of recent studies have combined metabolomics with innovative cell-culture techniques to model the HGSOC metastatic microenvironment for the investigation of cell-to-cell communication. The purpose of this review is to serve as a tool for researchers aiming to model the metastasis of HGSOC for metabolomics analyses. It will provide a comprehensive overview of current knowledge on the origin and pattern of metastasis of HGSOC and discuss the advantages and limitations of different model systems to help investigators choose the best model for their research goals, with a special emphasis on compatibility with different metabolomics modalities. It will also examine what is presently known about the role of small molecules in the origin and metastasis of HGSOC.

Intervention of 3D printing in health care: transformation for sustainable development

INTRODUCTION

Three-dimensional (3D) technology is the practice of dropping material layer-by-layer in the construction of the desired object. The application of the 3D printing technique has been observed in miscellaneous domains. Personalized medicine becomes the most demanding trend in the health-care segment. Several advancements have been observed in the progress of 3D printing. However, the availability of finished products in the marketplace is very less. There is an utmost requirement to improve the knowledge and skills in the sustainable development of pharmaceutical and medical products by selecting suitable techniques and materials.

AREAS COVERED

This article covers the fundamental process of 3D printing, types, pharmaceutical-medical application, benefits, and challenges.

EXPERT OPINION

This technology is capable of designing the complex geometry of an organ. It is feasible to produce drug products by incorporating multiple drugs in various compartments in such a fashion that these drugs can release from the compartment at a predetermined rate. Additionally, this 3D process has the potential to revolutionize personalized therapy to different age-groups through design flexibility and accurate dosing. In the upcoming years, the potential application of this technology can be seen in a clinical setting where patients will get individualized medicine as per their needs.

MS imaging of multicellular tumor spheroids and organoids as an emerging tool for personalized medicine and drug discovery

MS imaging (MSI) is a powerful tool in drug discovery because of its ability to interrogate a wide range of endogenous and exogenous molecules in a broad variety of samples. The impressive versatility of the approach, where almost any ionizable biomolecule can be analyzed, including peptides, proteins, lipids, carbohydrates, and nucleic acids, has been applied to numerous types of complex biological samples. While originally demonstrated with harvested organs from animal models and biopsies from humans, these models are time consuming and expensive, which makes it necessary to extend the approach to 3D cell culture systems. These systems, which include spheroid models, prepared from immortalized cell lines, and organoid cultures, grown from patient biopsies, can provide insight on the intersection of molecular information on a spatial scale. In particular, the investigation of drug compounds, their metabolism, and the subsequent distribution of their metabolites in 3D cell culture systems by MSI has been a promising area of study. This review summarizes the different ionization methods, sample preparation steps, and data analysis methods of MSI and focuses on several of the latest applications of MALDI-MSI for drug studies in spheroids and organoids. Finally, the application of this approach in patient-derived organoids to evaluate personalized medicine options is discussed.

Electroblotting through Enzymatic Membranes to Enhance Molecular Tissue Imaging

MALDI-TOF mass spectrometry imaging (MSI) is a powerful tool for studying biomolecule localization in tissue. Protein distributions in tissue provide important histological information; however, large proteins exhibit a high limit of detection in MALDI-MS when compared to their corresponding smaller proteolytic peptides. As a result, several techniques have emerged to digest proteins into more detectable peptides for imaging. Digestion is typically accomplished through trypsin deposition on the tissue, but this technique increases the complexity of the tissue microenvironment, which can limit the number of detectable species. This proof-of-principle study explores tryptic tissue digestion during electroblotting through a trypsin-containing membrane. This approach actively extracts and enzymatically digests proteins from mouse brain tissue sections while simultaneously reducing the complexity of the tissue microenvironment (compared to trypsin deposition on the surface) to obtain an increased number of detectable peptide fragments. The method does not greatly compromise spatial location or require expensive devices to uniformly deposit trypsin on tissue. Using electrodigestion through membranes, we detected and tentatively identified several tryptic peptides that were not observed after on-tissue digestion. Moreover, the use of pepsin rather than trypsin in digestion membranes allows extraction and digestion at low pH to detect peptides from a complementary subset of tissue proteins. Future studies will aim to further improve the method, including changing the substrate membrane to increase spatial resolution and the number of detected peptides.

Lineage-specific mechanisms and drivers of breast cancer chemoresistance revealed by 3D biomimetic culture

To improve the success rate of current preclinical drug trials, there is a growing need for more complex and relevant models that can help predict clinical resistance to anticancer agents. Here, we present a three‐dimensional (3D) technology, based on biomimetic collagen scaffolds, that enables the modeling of the tumor hypoxic state and the prediction of in vivo chemotherapy responses in terms of efficacy, molecular alterations, and emergence of resistance mechanisms. The human breast cancer cell lines MDA‐MB‐231 (triple negative) and MCF‐7 (luminal A) were treated with scaling doses of doxorubicin in monolayer cultures, 3D collagen scaffolds, or orthotopically transplanted murine models. Lineage‐specific resistance mechanisms were revealed by the 3D tumor model. Reduced drug uptake, increased drug efflux, and drug lysosomal confinement were observed in triple‐negative MDA‐MB‐231 cells. In luminal A MCF‐7 cells, the selection of a drug‐resistant subline from parental cells with deregulation of p53 pathways occurred. These cells were demonstrated to be insensitive to DNA damage. Transcriptome analysis was carried out to identify differentially expressed genes (DEGs) in treated cells. DEG evaluation in breast cancer patients demonstrated their potential role as predictive biomarkers. High expression of the transporter associated with antigen processing 1 (TAP1) and the tumor protein p53‐inducible protein 3 (TP53I3) was associated with shorter relapse in patients affected by ER⁺ breast tumor. Likewise, the same clinical outcome was associated with high expression of the lysosomal‐associated membrane protein 1 LAMP1 in triple‐negative breast cancer. Hypoxia inhibition by resveratrol treatment was found to partially re‐sensitize cells to doxorubicin treatment. Our model might improve preclinical in vitro analysis for the translation of anticancer compounds as it provides: (a) more accurate data on drug efficacy and (b) enhanced understanding of resistance mechanisms and molecular drivers.

A new method for the study of biophysical and morphological parameters in 3D cell cultures: Evaluation in LoVo spheroids treated with crizotinib

Three-dimensional (3D) culture systems like tumor spheroids represent useful in vitro models for drug screening and more broadly for cancer biology research, but the generation of uniform populations of spheroids remains challenging. The possibility to properly characterize spheroid properties would increase the reliability of these models. To address this issue different analysis were combined: i) a new device and relative analytical method for the accurate, simultaneous, and rapid measurement of mass density, weight, and size of spheroids, ii) confocal imaging, and iii) protein quantification, in a clinically relevant 3D model. The LoVo colon cancer cell line forming spheroids, treated with crizotinib (CZB) an ATP-competitive small-molecule inhibitor of the receptor tyrosine kinases, was employed to study and assess the correlation between biophysical and morphological parameters in both live and fixed cells. The new fluidic-based measurements allowed a robust phenotypical characterization of the spheroids structure, offering insights on the spheroids bulk and an accurate measurement of the tumor density. This analysis helps overcome the technical limits of the imaging that hardly penetrates the thickness of 3D structures. Accordingly, we were able to document that CZB treatment has an impact on mass density, which represents a key marker characterizing cancer cell treatment. Spheroid culture is the ultimate technology in drug discovery and the adoption of such precise measurement of the tumor characteristics can represent a key step forward for the accurate testing of treatment’s potential in 3D in vitro models.

Spatially Resolved Mass Spectrometry at the Single Cell: Recent Innovations in Proteomics and Metabolomics

Biological systems are composed of heterogeneous populations of cells that intercommunicate to form a functional living tissue. Biological function varies greatly across populations of cells, as each single cell has a unique transcriptome, proteome, and metabolome that translates to functional differences within single species and across kingdoms. Over the past decade, substantial advancements in our ability to characterize omic profiles on a single cell level have occurred, including in multiple spectroscopic and mass spectrometry (MS)-based techniques. Of these technologies, spatially resolved mass spectrometry approaches, including mass spectrometry imaging (MSI), have shown the most progress for single cell proteomics and metabolomics. For example, reporter-based methods using heavy metal tags have allowed for targeted MS investigation of the proteome at the subcellular level, and development of technologies such as laser ablation electrospray ionization mass spectrometry (LAESI-MS) now mean that dynamic metabolomics can be performed in situ. In this Perspective, we showcase advancements in single cell spatial metabolomics and proteomics over the past decade and highlight important aspects related to high-throughput screening, data analysis, and more which are vital to the success of achieving proteomic and metabolomic profiling at the single cell scale. Finally, using this broad literature summary, we provide a perspective on how the next decade may unfold in the area of single cell MS-based proteomics and metabolomics.

Quantifying ADC bystander payload penetration with cellular resolution using pharmacodynamic mapping

With the recent approval of 3 new antibody drug conjugates (ADCs) for solid tumors, this class of drugs is gaining momentum for the targeted treatment of cancer. Despite significant investment, there are still fundamental issues that are incompletely understood. Three of the recently approved ADCs contain payloads exhibiting bystander effects, where the payload can diffuse out of a targeted cell into adjacent cells. These effects are often studied using a mosaic of antigen positive and negative cells. However, the distance these payloads can diffuse in tumor tissue while maintaining a lethal concentration is unclear. Computational studies suggest bystander effects partially compensate for ADC heterogeneity in tumors in addition to targeting antigen negative cells. However, this type of study is challenging to conduct experimentally due to the low concentrations of extremely potent payloads. In this work, we use a series of 3-dimensional cell culture and primary human tumor xenograft studies to directly track fluorescently labeled ADCs and indirectly follow the payload via an established pharmacodynamic marker (γH2A. X). Using TAK-164, an anti-GCC ADC undergoing clinical evaluation, we show that the lipophilic DNA-alkylating payload, DGN549, penetrates beyond the cell targeted layer in GCC-positive tumor spheroids and primary human tumor xenograft models. The penetration distance is similar to model predictions, where the lipophilicity results in moderate tissue penetration, thereby balancing improved tissue penetration with sufficient cellular uptake to avoid significant washout. These results aid in mechanistic understanding of the interplay between antigen heterogeneity, bystander effects, and heterogeneous delivery of ADCs in the tumor microenvironment to design clinically effective therapeutics.

Studies of nanoparticle delivery with in vitro bio-engineered microtissues

A variety of engineered nanoparticles, including lipid nanoparticles, polymer nanoparticles, gold nanoparticles, and biomimetic nanoparticles, have been studied as delivery vehicles for biomedical applications. When assessing the efficacy of a nanoparticle-based delivery system, in vitro testing with a model delivery system is crucial because it allows for real-time, in situ quantitative transport analysis, which is often difficult with in vivo animal models. The advent of tissue engineering has offered methods to create experimental models that can closely mimic the 3D microenvironment in the human body. This review paper overviews the types of nanoparticle vehicles, their application areas, and the design strategies to improve delivery efficiency, followed by the uses of engineered microtissues and methods of analysis. In particular, this review highlights studies on multicellular spheroids and other 3D tissue engineering approaches for cancer drug development. The use of bio-engineered tissues can potentially provide low-cost, high-throughput, and quantitative experimental platforms for the development of nanoparticle-based delivery systems.

Promising Applications of Tumor Spheroids and Organoids for Personalized Medicine

One of the promising directions in personalized medicine is the use of three-dimensional (3D) tumor models such as spheroids and organoids. Spheroids and organoids are three-dimensional cultures of tumor cells that can be obtained from patient tissue and, using high-throughput personalized medicine methods, provide a suitable therapy for that patient. These 3D models can be obtained from most types of tumors, which provides opportunities for the creation of biobanks with appropriate patient materials that can be used to screen drugs and facilitate the development of therapeutic agents. It should be noted that the use of spheroids and organoids would expand the understanding of tumor biology and its microenvironment, help develop new in vitro platforms for drug testing and create new therapeutic strategies. In this review, we discuss 3D tumor spheroid and organoid models, their advantages and disadvantages, and evaluate their promising use in personalized medicine.

Visualisation of penetration of topical antifungal drug substances through mycosis-infected nails by matrix-assisted laser desorption ionisation mass spectrometry imaging

BACKGROUND

Matrix-assisted laser desorption ionisation mass spectrometry imaging (MALDI-MSI) is a mass spectrometry-based technique, which can be applied for compound-specific imaging of pharmaceuticals in tissues samples. MALDI-MSI technology is widely used to visualise penetration and distribution profile through different tissues but has never been used with nail tissue.

OBJECTIVES

This study used MALDI-MSI technology to visualise distribution profile and penetration into ex vivo human mycosis-infected toenails of three antifungal active ingredients amorolfine, ciclopirox and naftifine contained in topical onychomycosis nail treatment preparations, marketed as Loceryl^® , Ciclopoli^® and Exoderil^® .

METHODS

Three mycosis-infected toenails were used for each treatment condition. Six and twenty-four hours after one single topical application of antifungal drugs, excess of formulation was removed, nails were cryo-sectioned at a thickness of 20 μm, and MALDI matrix was deposited on each nail slice. Penetration and distribution profile of amorolfine, ciclopirox and naftifine in the nails were analysed by MALDI-MSI.

RESULTS

All antifungal actives have been visualised in the nail by MALDI-MSI. Ciclopirox and naftifine molecules showed a highly localised distribution in the uppermost layer of the nail plate. In comparison, amorolfine diffuses through the nail plate to the deep layers already 6 hours after application and keeps diffusing towards the lowest nail layers within 24 hours.

CONCLUSIONS

This study shows for the first-time distribution and penetration of certain antifungal actives into human nails using MALDI-MSI analysis. The results showed a more homogeneous distribution of amorolfine to nail and a better penetration through the infected nails than ciclopirox and naftifine.

Microextraction approaches for bioanalytical applications: An overview

Biological samples are usually complex matrices due to the presence of proteins, salts and a variety of organic compounds with chemical properties similar to those of the target analytes. Therefore, sample preparation is often mandatory in order to isolate the analytes from troublesome matrices before instrumental analysis. Because the number of samples in drug development, doping analysis, forensic science, toxicological analysis, and preclinical and clinical assays is steadily increasing, novel high throughput sample preparation approaches are calling for. The key factors in this development are the miniaturization and the automation of the sample preparation approaches so as to cope with most of the twelve principles of green chemistry. In this review, recent trends in sample preparation and novel strategies will be discussed in detail with particular focus on sorptive and liquid-phase microextraction in bioanalysis. The actual applicability of selective sorbents is also considered. Additionally, the role of 3D printing in microextraction for bioanalytical methods will be pinpointed.

Developing a Drug Screening Platform: MALDI-Mass Spectrometry Imaging of Paper-Based Cultures

Many potential chemotherapeutics fail to reach patients. One of the key reasons is that compounds are tested during the drug discovery stage in two-dimensional (2D) cell cultures, which are often unable to accurately model in vivo outcomes. Three-dimensional (3D) in vitro tumor models are more predictive of chemotherapeutic effectiveness than 2D cultures, and thus, their implementation during the drug screening stage has the potential to more accurately evaluate compounds earlier, saving both time and money. Paper-based cultures (PBCs) are an emerging 3D culture platform in which cells suspended in Matrigel are seeded into paper scaffolds and cultured to generate a tissue-like environment. In this study, we demonstrate the potential of matrix-assisted laser desorption/ionization-mass spectrometry imaging with PBCs (MALDI-MSI-PBC) as a drug screening platform. This method discriminated regions of the PBCs with and without cells and/or drugs, indicating that coupling PBCs with MALDI-MSI has the potential to develop rapid, large-scale, and parallel mass spectrometric drug screens.

Review of 3D Cell Culture with Analysis in Microfluidic Systems

A review with 105 references that analyzes the emerging research area of 3D cell culture in microfluidic platforms with integrated detection schemes. Over the last several decades a central focus of cell culture has been the development of better in vivo mimics. This has led to the evolution from planar cell culture to cell culture on 3D scaffolds, and the incorporation of cell scaffolds into microfluidic devices. Specifically, this review explores the incorporation of suspension culture, hydrogels scaffolds, paper-based scaffolds, and fiber-based scaffolds into microfluidic platforms. In order to decrease analysis time, simplify sample preparation, monitor key signaling pathways involved in cell-to-cell communication or cell growth, and combat the limitations of sample volume/ dilution seen in traditional assays, researchers have also started to focus on integrating detection schemes into the cell culture devices. This review will highlight the work that has been performed towards combining these techniques and will discuss potential future directions. It is clear that microfluidic-based 3D cell culture coupled with quantitative analysis can greatly improve our ability to mimic and understand in vivo systems.

Precision pharmacology: Mass spectrometry imaging and pharmacokinetic drug resistance

Failure of systemic cancer treatment can be, at least in part, due to the drug not being delivered to the tumour at sufficiently high concentration and/or sufficiently homogeneous distribution; this is termed as "pharmacokinetic drug resistance". To understand whether a drug is being adequately delivered to the tumour, "precision pharmacology" techniques are needed. Mass spectrometry imaging (MSI) is a relatively new and complex technique that allows imaging of drug distribution within tissues. In this review we address the applicability of MSI to the study of cancer drug distribution from the bench to the bedside. We address: (i) the role of MSI in pre-clinical studies to characterize anti-cancer drug distribution within the body and the tumour, (ii) the application of MSI in pre-clinical studies to define optimal drug dose or schedule, combinations or new drug delivery systems, and finally (iii) the emerging role of MSI in clinical research.

Physiologically Based Pharmacokinetic and Pharmacodynamic Analysis Enabled by Microfluidically Linked Organs-on-Chips

Physiologically based pharmacokinetic (PBPK) modeling and simulation approaches are beginning to be integrated into drug development and approval processes because they enable key pharmacokinetic (PK) parameters to be predicted from in vitro data. However, these approaches are hampered by many limitations, including an inability to incorporate organ-specific differentials in drug clearance, distribution, and absorption that result from differences in cell uptake, transport, and metabolism. Moreover, such approaches are generally unable to provide insight into pharmacodynamic (PD) parameters. Recent development of microfluidic Organ-on-a-Chip (Organ Chip) cell culture devices that recapitulate tissue-tissue interfaces, vascular perfusion, and organ-level functionality offer the ability to overcome these limitations when multiple Organ Chips are linked via their endothelium-lined vascular channels. Here, we discuss successes and challenges in the use of existing culture models and vascularized Organ Chips for PBPK and PD modeling of human drug responses, as well as in vitro to in vivo extrapolation (IVIVE) of these results, and how these approaches might advance drug development and regulatory review processes in the future.

Short-term 3D culture systems of various complexity for treatment optimization of colorectal carcinoma

Three-dimensional (3D) cultures have the potential to increase the predictive value of pre-clinical drug research and bridge the gap towards anticipating clinical outcome of proposed treatments. However, their implementation in more advanced drug-discovery programs is still in its infancy due to the lack of reproducibility and low time- and cost effectiveness. HCT116, SW620 and DLD1 cells, cell lines with distinct mutations, grade and origin, were co-cultured with fibroblasts and endothelial cells (EC) in 3D spheroids. Clinically relevant drugs, i.e. 5-fluorouracil (5−FU), regorafenib and erlotinib, were administered individually to in CRC cell cultures. In this study, we established a robust, low-cost and reproducible short-term 3D culture system addressing the various complexities of the colorectal carcinoma (CRC) microenvironment. We observed a dose-dependent increase of erlotinib sensitivity in 3D (co-)cultures compared to 2D cultures. Furthermore, we compared the drug combination efficacy and drug-drug interactions administered in 2D, 3D and 3D co-cultures. We observed that synergistic/additive drug-drug interactions for drug combinations administered at low doses shifted towards additive and antagonistic when applied at higher doses in metastatic CRC cells. The addition of fibroblasts at various ratios and EC increased the resistance to some drug combinations in SW620 and DLD1 cells, but not in HCT116. Retreatment of SW620 3D co-cultures with a low-dose 3-drug combination was as active (88% inhibition, relative to control) as 5-FU treatment at high dose (100 μM). Moreover, 3D and 3D co-cultures responded variably to the drug combination treatments, and also signalling pathways were differently regulated, probably due to the influence of fibroblasts and ECs on cancer cells. The short-term 3D co-culture system developed here is a powerful platform for screening (combination) therapies. Understanding of signalling in 3D co-cultures versus 3D cultures and the responses in the 3D models upon drug treatment might be beneficial for designing anti-cancer therapies.

Tissue Imaging by Mass Spectrometry: A Practical Guide for the Medicinal Chemist

Understanding the tissue distribution of therapeutic molecules is often critical for assessing their efficacy and toxicity. Unfortunately, standard methods for monitoring localized drug distribution are resource-intensive and are typically performed late in the discovery process. As a result, early development efforts often progress without detailed information on the effect that changes in structure and/or formulation have on drug localization. Recent innovations in mass spectrometry (MS) provide new options for mapping the spatial distribution of drug in tissue and allow parallel detection of endogenous species. These advances are improving access to drug distribution data early in discovery and provide insight into local biochemical changes that are directly related to drug activity. The literature on these topics is voluminous, and the technology is advancing rapidly, offering a bewildering array of options for researchers who are new to the field. To guide medicinal chemists who wish to apply these methods in their research, this technology perspective provides our views on practical applications that are currently enabled by various MS imaging (MSI) approaches, along with recommendations for how best to implement these methods in pharmaceutical R&D.

A Human iPSC-derived 3D platform using primary brain cancer cells to study drug development and personalized medicine

A high throughput histology (microTMA) platform was applied for testing drugs against tumors in a novel 3D heterotypic glioblastoma brain sphere (gBS) model consisting of glioblastoma tumor cells, iPSC-derived neurons, glial cells and astrocytes grown in a spheroid. The differential responses of gBS tumors and normal neuronal cells to sustained treatments with anti-cancer drugs temozolomide (TMZ) and doxorubicin (DOX) were investigated. gBS were exposed to TMZ or DOX over a 7-day period. Untreated gBS tumors increased in size over a 4-week culture period, however, there was no increase in the number of normal neuronal cells. TMZ (100 uM) and DOX (0.3 uM) treatments caused ~30% (P~0.07) and ~80% (P < 0.001) decreases in the size of the tumors, respectively. Neither treatment altered the number of normal neuronal cells in the model. The anti-tumor effects of TMZ and DOX were mediated in part by selective induction of apoptosis. This platform provides a novel approach for screening new anti-glioblastoma agents and evaluating different treatment options for a given patient.

A Human iPSC-derived 3D platform using primary brain cancer cells to study drug development and personalized medicine

A high throughput histology (microTMA) platform was applied for testing drugs against tumors in a novel 3D heterotypic glioblastoma brain sphere (gBS) model consisting of glioblastoma tumor cells, iPSC-derived neurons, glial cells and astrocytes grown in a spheroid. The differential responses of gBS tumors and normal neuronal cells to sustained treatments with anti-cancer drugs temozolomide (TMZ) and doxorubicin (DOX) were investigated. gBS were exposed to TMZ or DOX over a 7-day period. Untreated gBS tumors increased in size over a 4-week culture period, however, there was no increase in the number of normal neuronal cells. TMZ (100 uM) and DOX (0.3 uM) treatments caused ~30% (P~0.07) and ~80% (P < 0.001) decreases in the size of the tumors, respectively. Neither treatment altered the number of normal neuronal cells in the model. The anti-tumor effects of TMZ and DOX were mediated in part by selective induction of apoptosis. This platform provides a novel approach for screening new anti-glioblastoma agents and evaluating different treatment options for a given patient.

A Human iPSC-derived 3D platform using primary brain cancer cells to study drug development and personalized medicine

A high throughput histology (microTMA) platform was applied for testing drugs against tumors in a novel 3D heterotypic glioblastoma brain sphere (gBS) model consisting of glioblastoma tumor cells, iPSC-derived neurons, glial cells and astrocytes grown in a spheroid. The differential responses of gBS tumors and normal neuronal cells to sustained treatments with anti-cancer drugs temozolomide (TMZ) and doxorubicin (DOX) were investigated. gBS were exposed to TMZ or DOX over a 7-day period. Untreated gBS tumors increased in size over a 4-week culture period, however, there was no increase in the number of normal neuronal cells. TMZ (100 uM) and DOX (0.3 uM) treatments caused ~30% (P~0.07) and ~80% (P < 0.001) decreases in the size of the tumors, respectively. Neither treatment altered the number of normal neuronal cells in the model. The anti-tumor effects of TMZ and DOX were mediated in part by selective induction of apoptosis. This platform provides a novel approach for screening new anti-glioblastoma agents and evaluating different treatment options for a given patient.

MALDI MS Imaging at Acquisition Rates Exceeding 100 Pixels per Second

The practicality of matrix-assisted laser desorption/ionization (MALDI) time-of-flight (TOF) mass spectrometry (MS) applied to molecular imaging of biological tissues is limited by the analysis speed. Typically, a relatively low speed of stop-and-go micromotion of XY stages is considered as a factor substantially reducing the rate with which fresh sample material can be supplied to the laser spot. The sample scan rate in our laboratory-built high-throughput imaging TOF mass spectrometer was significantly improved through the use of a galvanometer-based optical scanner performing fast laser spot repositioning on a target plate. The optical system incorporated into the ion source of our MALDI TOF mass spectrometer allowed focusing the laser beam via a modified grid into a 10-μm round spot. This permitted the acquisition of high-resolution MS images with a well-defined pixel size at acquisition rates exceeding 100 pixel/s. The influence of selected parameters on the total MS imaging time is discussed. The new scanning technique was employed to display the distribution of an antitumor agent in 3D colorectal adenocarcinoma cell aggregates; a single MS image comprising 100 × 100 pixels with 10-μm lateral resolution was recorded in approximately 70 s. Graphical Abstract.

Magnetic bead-based peptide extraction methodology for tissue imaging

MALDI-TOF imaging mass spectrometry (IMS) is a common technique used for analyzing tissue samples, as it allows the user to detect multiple different analytes simultaneously. However, the detection and analysis of these analytes may sometimes be hampered due to the presence of contaminants in the tissue microenvironment, which leads to ion suppression. This challenge necessitates the development of an active extraction technique to selectively isolate analytes of interest without compromising their spatial localization within a tissue sample. This study proposes a magnetic bead-based active extraction approach to selectively sequester peptides of interest from tissue samples. The technique utilizes a heterobifunctional cross-linker to covalently bind peptides with free primary amine groups to functionalized magnetic beads. The cross-linked peptides can then be collected using a transfer magnet and imaged using MALDI-TOF IMS. We have established that this technique not only successfully isolates peptides both in-solution and on a solid surface, but also extracts peptides from a tissue section without significantly compromising their spatial localization. This novel method provides the means to detect a unique subset of peptides from tissue sections when compared to unextracted tryptically digested tissue, all while minimizing the presence of contaminants and maintaining spatial localization.

MALDI-MSI of Immunotherapy: Mapping the EGFR-Targeting Antibody Cetuximab in 3D Colon-Cancer Cell Cultures

Immunotherapies are treatments that use a patient's immune system to combat disease. One important type of immunotherapy employed in cancer treatments is the delivery of monoclonal antibodies to block growth receptors. In this manuscript, we develop a methodology that enables accurate and simple evaluation of antibody-type drug delivery using MALDI-MSI. To overcome the mass-range limitation that prevents the detection of large therapeutic antibodies, we used in situ reduction and alkylation to break disulfide bonds to generate smaller fragments. These smaller fragments are more readily ionized and detected by MALDI-MSI without loss of spatial information on the parent drug. As a proof of concept study, we evaluated the distribution of cetuximab in 3D colon cell cultures. Cetuximab is a monoclonal antibody that binds to the extracellular domain of epidermal-growth-factor receptor (EGFR), which is often overexpressed in colorectal cancer (CRC) and mediates cell differentiation, proliferation, migration, and angiogenesis. Cetuximab directly inhibits tumor growth and metastasis and induces apoptosis. By performing on-tissue reduction followed by MALDI-MSI analysis, we successfully mapped the time-dependent penetration and distribution of cetuximab in spheroids derived from two different colon-cancer cell lines (HT-29 and DLD-1). The localization patterns were further confirmed with IF staining of the drug. Changes in other biomolecules following drug treatment were also observed, including the elevation of ATP in spheroids. The developed method has also been applied to map cetuximab distribution in patient-derived colorectal-tumor organoids (CTOs). Overall, we believe this powerful label-free approach will be useful for visualizing the heterogeneous distribution of antibody drugs in tissues and tumors and will help to monitor and optimize their use in the clinic.

Combined Short-Term Glucose Starvation and Chemotherapy in 3D Colorectal Cancer Cell Culture Decreases 14-3-3 Family Protein Expression and Phenotypic Response to Therapy

Short-term glucose starvation prior to chemotherapy has the potential to preferentially weaken cancer cells, making them more likely to succumb to treatment, while protecting normal cells. In this study, we used 3D cell cultures of colorectal cancer and assessed the effects of short-term glucose starvation and chemotherapy compared to treatment of either individually. We evaluated both phenotypic changes and protein expression levels. Our findings indicate that the combined treatment results in more significant phenotypic responses, including decreased cell viability and clonogenicity. These phenotypic responses can be explained by the decreased expression of LDHA and 14-3-3 family proteins, which were found only in the combined treatment groups. This study indicates that short-term glucose starvation has the potential to increase the efficacy of current cancer treatment regimes. Graphical Abstract ᅟ.

3D-printed miniaturized fluidic tools in chemistry and biology

3D printing (3DP), an additive manufacturing (AM) approach allowing for rapid prototyping and decentralized fabrication on-demand, has become a common method for creating parts or whole devices. The wide scope of the AM extends from organized sectors of construction, ornament, medical, and R&D industries to individual explorers attributed to the low cost, high quality printers along with revolutionary tools and polymers. While progress is being made but big manufacturing challenges are still there. Considering the quickly shifting narrative towards miniaturized analytical systems (MAS) we focus on the development/rapid prototyping and manufacturing of MAS with 3DP, and application dependent challenges in engineering designs and choice of the polymeric materials and provide an exhaustive background to the applications of 3DP in biology and chemistry. This will allow readers to perceive the most important features of AM in creating (i) various individual and modular components, and (ii) complete integrated tools.

Development of an in vitro cell-sheet cancer model for chemotherapeutic screening

Epithelial cancer grows in vivo in a microenvironment that comprises tumour, stroma, and immune cells. A three-dimensional (3D) culture model might be able to mimic the tumour microenvironment in vivo; therefore, we developed a new 3D epithelial cancer model using in vitro cell-sheet engineering and compared the results of treatment with several chemotherapeutic drugs among the 3D cell-sheet model, spheroid culture, and 2D cell culture.

Methods: The cell sheet comprised keratinocytes and a plasma fibrin matrix containing fibroblasts. Cancer spheroids with or without cancer-associated fibroblasts (CAFs) were interposed between the keratinocytes and fibrin layer. Cell growth, viability, and hypoxia were measured using the cell counting kit-8, LIVE/DEAD assay, and propidium iodide and LOX-1 staining. The morphology, invasion, and mRNA and protein expression were compared among the different cell culture models.

Results: Enhanced resistance to sorafenib and cisplatin by cancer spheroids and CAFs was more easily observed in the 3D than in the 2D model. Invasion by cancer-CAF spheroids into the fibrin matrix was more clearly observed in the 3D cell sheet. The expansion of viable cancer cells increased in the 3D cell sheet, particularly in those with CAFs, which were significantly inhibited by treatment with 10 μM sorafenib or 20 μM cisplatin (P < 0.05). TGF-β1, N-cadherin, and vimentin mRNA and protein levels were higher in the 3D cell-sheet model.

Conclusions: The 3D cell sheet-based cancer model could be applied to in vitro observation of epithelial cancer growth and invasion and to anticancer drug testing.

Technologies for Measuring Pharmacokinetic Profiles

The creation of a pharmacokinetic (PK) curve, which follows the plasma concentration of an administered drug as a function of time, is a critical aspect of the drug development process and includes such information as the drug's bioavailability, clearance, and elimination half-life. Prior to a drug of interest gaining clearance for use in human clinical trials, research is performed during the preclinical stages to establish drug safety and dosing metrics from data obtained from the PK studies. Both in vivo animal models and in vitro platforms have limitations in predicting human reaction to a drug due to differences in species and associated simplifications, respectively. As a result, in silico experiments using computer simulation have been implemented to accurately predict PK parameters in human studies. This review assesses these three approaches (in vitro, in vivo, and in silico) when establishing PK parameters and evaluates the potential for in silico studies to be the future gold standard of PK preclinical studies.