Active capillary plasma source for ambient mass spectrometry

Ion Chemistry in Dielectric Barrier Discharge Ionization: Recent Advances in Direct Gas Phase Analyses

Dielectric barrier discharge ionization (DBDI) sources, employing low-temperature plasma, have emerged as sensitive and efficient ionization tools with various atmospheric pressure ionization processes. In this review, we summarize a historical overview of the development of DBDI, highlighting key principles of gas-phase ion chemistry and the mechanisms underlying the ionization processes within the DBDI source. These processes start with the formation of reagent ions or metastable atoms from the discharge gas, which depends on the nature of the gas (helium, nitrogen, air) and on the presence of water vapor or other compounds or dopants. The processes of ionizing the analyte molecules are summarized, including Penning ionization, electron transfer, proton transfer and ligand switching from secondary hydrated hydronium ions. Presently, the DBDI-MS methods face a challenge in the accurate quantification of gaseous analytes, limiting its broader application in biological, environmental, and medical realms where relative quantification using standards is inherently complex for gaseous matrices. Finally, we propose future avenues of research to enhance the analytical capabilities of DBDI-MS.

Rapid detection of aflatoxin B1, zearalenone and ochratoxin A in grains by thermal desorption dielectric barrier discharge ionization mass spectrometry

Dielectric barrier discharge ionization is increasingly used for rapid detection in ambient mass spectrometry, although more often for gaseous and highly volatile samples than for solids and liquids. In this project, we present a rapid and sensitive method for detecting mycotoxins and demonstrate its capability for the detection of aflatoxin B1, zearalenone, and ochratoxin A in food samples. Our method is based on thermal desorption coupled to dielectric barrier discharge ionization mass spectrometry (TD-DBDI-MS), which we show generates minimal interferences and produces almost exclusively molecular ions. We detected mycotoxins in various food samples, including corn, peanuts, millet, and rice. Our method has a linear dynamic range of 1 μg kg-1 to 100 μg kg-1 for all three mycotoxins and a limit of detection (LOD) of 0.31 μg kg-1, 0.28 μg kg-1 and 0.43 μg kg-1, respectively. It is simple, rapid, reduces the pretreatment steps and has significant potential for practical applications.

Rapid desorption and analysis for illicit drugs and chemical profiling of fingerprints by SICRIT ion source

Forensic analysis can encompass a wide variety of analytes from biological samples including DNA, blood, serum, and fingerprints to synthetic samples like drugs and explosives. In order to analyze this variety, there are various sample preparation techniques, which can be time-consuming and require multiple analytical instruments. With recent advancements in ambient ionization mass spectrometry (MS), plasma-based dielectric barrier discharge ionization (DBDI) sources have demonstrated to cover a wide range of these analytes. The flow-through design of this source also allows for easy connection to a thermal desorption type of sample introduction. We present an in-house built thermal desorption device where the sample is introduced via a glass slide, which gets heated and transferred to the DBDI-MS with nitrogen for identification and semi-quantification. Using a glass slide as an inexpensive sampling device, detection limits as low as 20 pg for fentanyl are demonstrated. Additionally, a very precise (>96% accuracy) identification of persons based on the chemical profile of their fingerprints is possible, establishing a direct analytical link of the drug trace to the individual in one measurement. We compared the DAG, TAG, sterol, and (semi-)volatile region of the averaged fingerprint spectra over multiple days, showing the best model accuracy for identification based on the DAG region. The combination of thermal desorption and DBDI-MS minimized sample preparation, leading to an ultrasensitive and rapid analysis of illicit drug traces and the identification of underlying personas based on fingerprints.

Characterization of a Soft Ionization by Chemical Reaction in Transfer Ion Source Hyphenated With Supercritical Fluid Chromatography-Tandem Mass Spectrometry

A commercially available dielectric barrier discharge ionization (DBDI) source was tested with supercritical fluid chromatography-mass spectrometry (SFC-MS). The compound mixture investigated comprised caffeine, theobromine, theophylline, uracil, testosterone, and pyrene, diluted in methanol. Dynamic response ranges were evaluated with multiple injections at different concentrations. Precision studies demonstrated the robustness and sensitivity of the ionization source across a concentration range of 10-1000 ng/mL. Results from this experiment showed linear regression of 0.99 or greater for all analytes tested over the range with a relative standard deviation (RSD) of less than 10% down to 10 ng/mL for all analytes except theobromine, which had an RSD of less than 10% down to 25 ng/mL. Notably, this study marks the first investigation of sensitivity for coupling a commercial DBDI source with SFC; a limit of detection less than 1 ng/mL was achieved for all compounds. This study demonstrates chromatographic separation by SFC and MS analysis for compounds that ionize poorly using traditional atmospheric pressure ionization, such as polycyclic aromatic hydrocarbons. Combining SFC with the DBDI source opens promising avenues for analyzing compounds that were previously challenging to characterize with standard atmospheric pressure ionization techniques.

In-Line Thermal Desorption and Dielectric Barrier Discharge Ionization for Rapid Mass Spectrometry Detection of Explosives

Thermal desorption (TD) of wipe-based samples was coupled with an in-line dielectric barrier discharge ionization (DBDI) source and rugged compact time-of-flight mass spectrometer (MS) for the detection of explosives, propellants, and postblast debris. The chromatography-free TD-DBDI-MS platform enabled rapid and sensitive detection of organic nitramine, nitrate ester, and nitroaromatic explosives as well as black powder and black powder substitute propellants. Parametric investigations characterized the response to TD temperature and optimized DBDI voltage, aerodynamically assisted entrainment, and fragmentation through in-source collision induced dissociation (isCID). Excess nitrate generated by the DBDI source yielded predominantly nitrate-adduct formation. Subnanogram sensitivities were demonstrated for all explosives investigated, except for nitroglycerin, specifically due to its volatility. Further, most analytes/explosives exhibited tens of picograms sensitivities. The platform also demonstrated the detection of propellant and military explosives from postblast debris. The TD-DBDI-MS system performed well without the need for aerodynamically assisted entrainment (and the associated rough pump), which along with requiring no additional gases (i.e., N2 or He) or solvents, aid in potential field deployment. The ease of TD-DBDI attachment and removal added trace solid or liquid residue detection to the rugged mass spectrometer, designed primarily for the analysis of volatile organic and inorganic compounds.

A Facile Determination of Herbicide Residues and Its Application in On-Site Analysis

Abuse of herbicides in food safety is a vital concern that has an influence on the sustainable development of the world. This work presents, a modified ionization method with separation of the sample and carrier gas inlets, which was utilized for efficient ionization and analyte transfer of herbicides in crops. The working parameters of voltage, injective distance, desorption temperature, and the carrier gas flow rate were optimized to achieve the high efficiency of the transfer and ionization of the analyte. When it was applied in the analysis of herbicides in laboratory, the method exhibited excellent performance in achieving the quantitative detection of herbicides in solutions and residues spiked in an actual matrix with a limit of quantification of 1-20 μg/kg and relative standard deviations of less than 15%. Although a simple QuEchERS process was used, the programmable heating platform ensured efficient gasification and transfer of the target analyte, with the advantages of high speed and selectivity, avoiding the noted matrix effect. The method exhibited a relatively acceptable performance by using air as the discharged gas (open air). It could be used to monitor herbicide residues in the growth stage via on-site non-destructive analysis, which obtained low LODs by dissociating the herbicides from the crops without any pretreatment. It showed great potential for the supervision of the food safety market by achieving non-destructive detection of crops anytime and anywhere. This finding may provide new insights into the determination of pesticide emergence and rice quality assessment.

Solvent-Assisted Laser Desorption Flexible Microtube Plasma Mass Spectrometry for Direct Analysis of Dried Samples on Paper

The present study investigated the potential for solvent-assisted laser desorption coupled with flexible microtube plasma ionization mass spectrometry (SALD-FμTP-MS) as a rapid analytical technique for direct analysis of surface-deposited samples. Paper was used as the demonstrative substrate, and an infrared hand-held laser was employed for sample desorption, aiming to explore cost-effective sampling and analysis methods. SALD-FμTP-MS offers several advantages, particularly for biofluid analysis, including affordability, the ability to analyze low sample volumes (<10 μL), expanded chemical coverage, sample and substrate stability, and in situ analysis and high throughput potential. The optimization process involved exploring the use of viscous solvents with high boiling points as liquid matrices. This approach aimed to enhance desorption and ionization efficiencies. Ethylene glycol (EG) was identified as a suitable solvent, which not only improved sensitivity but also ensured substrate stability during analysis. Furthermore, the addition of cosolvents such as acetonitrile/water (1:1) and ethyl acetate further enhanced sensitivity and reproducibility for a standard solution containing amphetamine, imazalil, and cholesterol. Optimized conditions for reproducible and sensitive analysis were determined as 1000 ms of laser exposure time using a 1 μL solvent mixture of 60% EG and 40% acetonitrile (ACN)/water (1:1). A mixture of 60% EG and 40% ACN/water (1:1) resulted in signal enhancements and relative standard deviations of 12, 20, and 13% for the evaluated standards, respectively. The applicability of SALD-FμTP-MS was further evaluated by successfully analyzing food, water, and biological samples, highlighting the potential of SALD-FμTP-MS analysis, particularly for thermolabile and polarity diverse compounds.

Exploring new dimensions: Single and multi-block analysis of essential oils using DBDI-MS and FT-IR for enhanced authenticity control

BACKGROUND

Essential oils (EOs) are complex mixtures of volatile hydrocarbons with a wide range of applications in the pharmaceutical, fragrance and food industry. The composition of EOs is highly variable and can affect their quality and pharmaceutical efficacy. Moreover, the high economic value of EOs, such as those obtained from Rosa damascena, make falsification and misclassification a lucrative business. Consequently, adulterations can lead to serious health consequences for consumers. While current quality control methods for EOs involve analysing their chromatographic profile or comparing their Fourier transform infrared (FT-IR) spectra, these methods can be time-consuming or lack sensitivity. To address these issues, we compared state-of-the-art quality control methods, including gas chromatography flame ionization detection (GC-FID) quantification and enantiomeric ratio determination, FT-IR spectrometry with dielectric barrier discharge ionization coupled to triple quadrupole mass spectrometer (DBDI-MS), in a chemometric single- and multi-block approach.

RESULTS

Our results show that the best classification accuracy of 94.7% for R. damascena samples was obtained using GC-FID combined with partial least square discriminant analysis (PLS-DA). Comparatively, the enantiomeric ratios did not improve classification accuracy. In contrast, fragmentation data from DBDI-MS (Q3), which was acquired in a fraction of the analysis time and without extensive sample preparation, achieved a classification accuracy of 84.2%. We also found that combining FT-IR with parent ion DBDI-MS (Q1) data in a multi-block sequentially orthogonalized partial least squares linear discriminant analysis (SO-PLS-LDA) model improved classification accuracy, compared to their respective single-block PLS-DA models.

SIGNIFICANCE

Overall, our study demonstrates that DBDI, as an ambient ionization method, has significant potential for high-throughput screening. When combined with MS, it can produce comparable classification accuracies to conventional methods, while offering the added benefits of speed and convenience. As such, DBDI-MS is a promising tool for EO quality control.

Spatio-Temporal Analysis of Anesthetics in Mice by Solid-Phase Microextraction: Dielectric Barrier Discharge Ionization Mass Spectrometry

Local anesthetics, drugs that only affect a restricted area of the body, are widely used in daily clinical practice. Less studied but equally important is the distribution of local anesthetics inside organisms. Here, we present a rapid in situ testing method of drug distribution in various organs. The temporal and spatial distribution of anesthetics in mice was measured by solid-phase microextraction (SPME), thermal desorption (TD), and dielectric barrier discharge ionization (DBDI) atmospheric pressure mass spectrometry. A coated SPME probe using a tungsten wire as the support covered with a carbonaceous material was prepared by a simple, low-cost flame method. An in-line structure of the inlet allows TD and DBDI to share the same capillary tube, which greatly improves the transmission efficiency. Nine kinds of anesthetics, such as lidocaine and dyclonine, were detected, and the limit of detection was determined to be as low as 13 pg/mL. In addition, the time-dependent distribution of drugs in mice organs was studied. We also found that macromolecules in organisms do not noticeably interfere with the detection. This method is convenient and efficient because it does not require tissue homogenates and allows direct in situ detection. Compared with the conventional analytical methods, this method is simple and rapid, works in situ, and allows microscale analysis of trace analytes in biological organisms with high sensitivity.

Ion Heating in Advanced Dielectric Barrier Discharge Ion Sources for Ambient Mass Spectrometry

Dielectric barrier discharges (DBD) are highly versatile plasma sources for forming ions at atmospheric pressure and near ambient temperatures for the rapid, direct, and sensitive analysis of molecules by mass spectrometry (MS). Ambient ion sources should ideally form intact ions, as in-source fragmentation can limit sensitivity, increase spectral complexity, and hinder interpretation. Here, we report the measurement of ion internal energy distributions for the four primary classes of DBD-based ion sources, specifically DBD ionization (DBDI), low-temperature plasma (LTP), flexible microtube plasma (FμTP), and active capillary plasma ionization (ACaPI), in addition to atmospheric pressure chemical ionization (APCI) using para-substituted benzylammonium thermometer ions. Surprisingly, the average extent of energy deposited by the use of ACaPI (90.6 kJ mol-1) was ∼40 kJ mol-1 lower than the other ion sources (DBDI, LTP, FμTP, and APCI; 130.2 to 134.1 kJ mol-1) in their conventional configurations, and slightly higher than electrospray ionization (80.8 kJ mol-1). The internal energy distributions did not depend strongly on the sample introduction conditions (i.e., the use of different solvents and sample vaporization temperatures) or the DBD plasma conditions (i.e., maximum applied voltage). By positioning the DBDI, LTP, and FμTP plasma jets on axis with the capillary entrance to the mass spectrometer, the extent of internal energy deposition could be reduced by up to 20 kJ mol-1, although at the expense of sensitivity. Overall, the use of an active capillary-based DBD can result in substantially less fragmentation of ions with labile bonds than alternate DBD sources and APCI with comparably high sensitivity.

Effect of Dopants and Gas-Phase Composition on Ionization Behavior and Efficiency in Dielectric Barrier Discharge Ionization

Cold plasma-based ionization techniques allow for soft ionization of a wide variety of chemical compounds. In this chemical ionization mechanism, the atmosphere plays a crucial role in ionization. Knowing its influence is critical for the optimization of analysis conditions and interpretation of resulting spectra. This study uses soft ionization by chemical reaction in transfer (SICRIT), a variant of dielectric barrier discharge ionization (DBDI), that allows for a controlled atmosphere to investigate atmosphere and dopant effects. The influence of eight makeup gas compositions (dry nitrogen, room air, and nitrogen-enriched with either water, HCl, MeOH, hexane, NH₃, and fluorobenzene) on the ionization with SICRIT was investigated. Fifteen compound classes, comprising alkanes, polyaromatic hydrocarbons (PAHs), terpenes, oxygen-containing terpenes, alkylphenols, chlorophenols, nitrophenols, trialkylamines, triazines, phthalates with or without ether groups, aldehydes, ketones, fatty acid methyl esters (FAMEs), and polyoxy-methylene ethers (OMEs) were measured via gas chromatography SICRIT high-resolution mass spectrometry (GC-SICRIT-HRMS). The different atmospheres were compared in terms of generated ions, ion intensities and fragmentation during ionization. Measurements of reactant ions were performed for a better understanding of the underlying mechanisms. All 15 compound classes were mostly softly ionized. For most compound classes and atmospheres, protonation is the dominant ionization mode. The highest number of compounds ionized via protonation was observed in dry nitrogen, followed by room air and humid nitrogen. The study should work as a guideline for the choice of atmosphere for specific compound classes and the interpretation of spectra generated under a specific atmosphere.

Discriminating alkylbenzene isomers with tandem mass spectrometry using a dielectric barrier discharge ionization source

Soft ambient ionization sources generate reactive species that interact with analyte molecules to form intact molecular ions, which allows rapid, sensitive, and direct identification of the molecular mass. We used a dielectric barrier discharge ionization (DBDI) source with nitrogen at atmospheric pressure to detect alkylated aromatic hydrocarbon isomers (C₈ H₁₀ or C₉ H₁₂ ). Intact molecular ions [M]^•+ were detected at 2.4 kV_pp , but at increased voltage (3.4 kV_pp ), [M + N]⁺ ions were formed, which could be used to differentiate regioisomers by collision-induced dissociation (CID). At 2.4 kV_pp , alkylbenzene isomers with different alkyl-substituents could be identified by additional product ions: ethylbenzene and -toluene formed [M-2H]⁺ , isopropylbenzene formed abundant [M-H]⁺ , and propylbenzene formed abundant C₇ H₇ ⁺ . At an operating voltage of 3.4 kV_pp , fragmentation of [M + N]⁺ by CID led to neutral loss of HCN and CH₃ CN, which corresponded to steric hindrance for excited state N-atoms approaching the aromatic ring (C-H). The ratio of HCN to CH₃ N loss (interday relative standard deviation [RSD] < 20%) was distinct for ethylbenzene and ethyltoluene isomers. The greater the number of alkyl-substituents (C-CH₃ ) and the more sterically hindered (meta > para > ortho) the aromatic core, the greater the loss of CH₃ CN relative to HCN was.

Dielectric Barrier Discharge Ionization Mechanisms: Polycyclic Aromatic Hydrocarbons as a Case of Study

Dielectric barrier discharge ionization (DBDI) is a versatile tool for small-molecule mass spectrometry applications, helping cover from polar to low polar molecules. However, the plasma gas-phase interactions are highly complex and have been scarcely investigated. The ionization mechanisms of plasmas have long been assumed to be somewhat similar to atmospheric pressure chemical ionization (APCI). Here, we evaluated the ionization mechanisms of a two-ring DBDI ion source, using different discharge gases to analyze vaporized liquid samples. Polycyclic aromatic hydrocarbons (PAHs) were used as model analytes to assess the mechanisms' dominance: protonation, [M + H]+, or radical ion species formation, [M]·+. In the present work, two different ionization trends were observed for APCI and DBDI during the PAH analysis; the compounds with proton affinities (PA) over 856 kJ/mol were detected as [M + H]+ when APCI was used as ionization source. Meanwhile, independently of the PA, DBDI showed the prevalence of charge exchange reactions. The addition of dopants in the gas-phase region shifted the ionization mechanisms toward charge exchange reactions, facilitating the formation of [M]·+ ion species, showing anisole a significant boost of the PAH radical ion species signals, over nine times for Ar-Prop-DBDI analysis. The presence of high-energy metastable atoms (e.g., HeM) with high ionization potentials (IE = 19.80 eV) did not show boosted PAH abundances or extensive molecule fragmentation. Moreover, other species in the plasma jet region with closer and more appropriate IE, such as N2 B3Πg excited molecules, are likely responsible for PAH Penning ionization.

Detection of Trace Explosives Using a Novel Sample Introduction and Ionization Method

A novel sample introduction and ionization method for trace explosives detection is proposed and investigated herein, taking into consideration real-world application requirements. A thermal desorption sampling method and dielectric barrier discharge ionization (DBDI) source, with air as the discharge gas, were developed. The counter flow method was adopted firstly into the DBDI source to remove the interference of ozone and other reactive nitrogen oxides. A separated reaction region with an ion guiding electric field was developed for ionization of the sample molecules. Coupled with a homemade miniature digital linear ion trap mass spectrometer, this compact and robust design, with further optimization, has the advantages of soft ionization, a low detection limit, is free of reagent and consumable gas, and is an easy sample introduction. A range of common nitro-based explosives including TNT, 2,4-DNT, NG, RDX, PETN, and HMX has been studied. A linear response in the range of two orders of magnitude with a limit of detection (LOD) of 0.01 ng for TNT has been demonstrated. Application to the detection of real explosives and simulated mixed samples has also been explored. The work paves the path to developing next generation mass spectrometry (MS) based explosive trace detectors (ETDs).

Ionization of semi-fluorinated n-alkanes in controlled atmosphere using flexible micro-tube plasma (FμTP) ionization source with square- and sine-wave voltage

Non-thermal plasma-based ionization sources have been widely used and shown excellent soft ionization performance in mass spectrometry. Despite their extensive application, the ionization mechanisms of these sources are of great interest for further exploring their full potential. A controlled atmosphere can provide a clean and controllable ionization environment and is beneficial for studying the ionization mechanism. The plasma source itself also has a significant impact on the ionization mechanism of the analyte, and the voltage waveform is one of the key parameters for controlling the plasma source. In this paper, a miniature flexible micro-tube plasma (FμTP) ionization source was sustained using both square and sine-wave voltage. The ionization processes of typical semi-fluorinated n-alkanes (SFAs) were investigated in the controlled atmosphere filled with 80% N₂ and 20% O₂. The main mass peaks using both square and sine-wave voltages are found to be [M-mH]⁺ and [M-mH+nO]⁺ (m = 1, 3; n = 0, 1, 2). However, for the square-wave voltage, the [M-H+O]⁺ species are the most abundant while [M-H]⁺ species are dominant for the sine-wave voltage, showing that the plasma generated with sine-wave voltage is somewhat "softer" than the one with square-wave voltage for SFAs. With the assistance of optical spectroscopy, the plasma developments in one discharge cycle for both voltage waveforms were obtained. Only one discharge can be found in each half cycle for square-wave voltage while several for the sine-wave voltage. These would be responsible for the different ionization behaviors in these two cases. This work provides more insight into the ionization mechanism of SFAs and more understanding of plasma-based soft ionization. In addition, the analytical performance was evaluated to be comparable when using these two voltage generators with a big difference in cost, which will benefit the instrumental development.

Excited-State N Atoms Transform Aromatic Hydrocarbons into N-Heterocycles in Low-Temperature Plasmas

The direct formation of N-heterocycles from aromatic hydrocarbons has been observed in nitrogen-based low-temperature plasmas; the mechanism of this unusual nitrogen-fixation reaction is the topic of this paper. We used homologous aromatic compounds to study their reaction with reactive nitrogen species (RNS) in a dielectric barrier discharge ionization (DBDI) source. Toluene (C₇H₈) served as a model compound to study the reaction in detail, which leads to the formation of two major products at "high" plasma voltage: a nitrogen-replacement product yielding protonated methylpyridine (C₆H₈N⁺) and a protonated nitrogen-addition (C₇H₈N⁺) product. We complemented those studies by a series of experiments probing the potential mechanism. Using a series of selected-ion flow tube experiments, we found that N⁺, N₂⁺, and N₄⁺ react with toluene to form a small abundance of the N-addition product, while N(⁴S) reacted with toluene cations to form a fragment ion. We created a model for the RNS in the plasma using variable electron and neutral density attachment mass spectrometry in a flowing afterglow Langmuir probe apparatus. These experiments suggested that excited-state nitrogen atoms could be responsible for the N-replacement product. Density functional theory calculations confirmed that the reaction of excited-state nitrogen N(²P) and N(²D) with toluene ions can directly form protonated methylpyridine, ejecting a carbon atom from the aromatic ring. N(²P) is responsible for this reaction in our DBDI source as it has a sufficient lifetime in the plasma and was detected by optical emission spectroscopy measurements, showing an increasing intensity of N(²P) with increasing voltage.

Electrodynamic balance–mass spectrometry reveals impact of oxidant concentration on product composition in the ozonolysis of oleic acid

Electrodynamic balance–mass spectrometry measurements reveal how the ozone concentration influences the product composition of oleic acid aerosol droplets.

Nontargeted Screening Using Gas Chromatography-Atmospheric Pressure Ionization Mass Spectrometry: Recent Trends and Emerging Potential

Gas chromatography–high-resolution mass spectrometry (GC–HRMS) is a powerful nontargeted screening technique that promises to accelerate the identification of environmental pollutants. Currently, most GC–HRMS instruments are equipped with electron ionization (EI), but atmospheric pressure ionization (API) ion sources have attracted renewed interest because: (i) collisional cooling at atmospheric pressure minimizes fragmentation, resulting in an increased yield of molecular ions for elemental composition determination and improved detection limits; (ii) a wide range of sophisticated tandem (ion mobility) mass spectrometers can be easily adapted for operation with GC–API; and (iii) the conditions of an atmospheric pressure ion source can promote structure diagnostic ion–molecule reactions that are otherwise difficult to perform using conventional GC–MS instrumentation. This literature review addresses the merits of GC–API for nontargeted screening while summarizing recent applications using various GC–API techniques. One perceived drawback of GC–API is the paucity of spectral libraries that can be used to guide structure elucidation. Herein, novel data acquisition, deconvolution and spectral prediction tools will be reviewed. With continued development, it is anticipated that API may eventually supplant EI as the de facto GC–MS ion source used to identify unknowns.

Plug-and-play laser ablation-mass spectrometry for molecular imaging by means of dielectric barrier discharge ionization

The plug-and-play hyphenation of UV-laser ablation (LA) and mass spectrometry is presented, using dielectric barrier discharge ionization (DBDI). The DBDI source employed here is characterized by its unique geometry, being directly mounted onto the inlet capillary of a mass spectrometer. In the literature, this particular kind of DBDI source is also referred to as active capillary plasma ionization. It has been commercialized as soft ionization by chemical reaction in transfer (SICRIT) and will be addressed as DBDI in this study. LA-DBDI-MS was used for the direct, molecule-specific and spatially resolved analysis of various solid samples, such as coffee beans and pain killer tablets without extensive sample preparation. The combination of fast washout UV-laser ablation and the principle of the DBDI source used here allowed for highly efficient soft ionization as well as high spatial resolution down to 10 μm for molecular imaging.

FIELDABLE MASS SPECTROMETRY FOR FORENSIC SCIENCE, HOMELAND SECURITY, AND DEFENSE APPLICATIONS

Mass spectrometry is commonly used in forensic chemistry laboratories for sensitive, definitive analysis. There have been significant efforts to bring mass spectrometry analysis on-site through the development of ruggedized, fieldable instruments. Testing samples in the field is of particular interest in forensic science, homeland security, and defense applications. In forensic chemistry, testing seized drugs in the field can significantly improve efficiencies in processing of related criminal cases. The screening of passengers and luggage at transportation hubs is a critical need for homeland security for which mass spectrometry is well suited to provide definitive answers with low false positive rates. Mass spectrometry can yield reliable data for military personnel testing sites for potential chemical weapons release. To meet the needs of the forensic and security communities fieldable mass spectrometers based on membrane inlet systems and hybrid gas chromatography systems have been developed and commercialized. More recently developed ambient ionization mass spectrometry methods can eliminate the time, equipment, and expertise associated with sample preparation, and so are especially appealing for on-site analysis. We describe the development of fieldable mass spectrometry systems, with emphasis on commercially available systems that have been deployed for on-site analysis of seized drugs, chemical warfare agents, explosives, and other analytes of interest to the forensic and security communities. © 2020 John Wiley & Sons Ltd. Mass Spec Rev.

MODERN PLASMA-BASED DESORPTION/IONIZATION: FROM ATOMS AND MOLECULES TO CHEMICAL SYNTHESIS

Since the first mass spectrometry (MS) experiments were conducted by Thomson and Aston, plasmas have been used as ionization sources. Historically, plasma ion sources were used for these experiments because they were one of the few known sources of gas-phase ions at the time and they were relatively simple to setup and operate. Since then, developments in plasma ionization have continued to inform and motivate advances in other areas of MS. For example, plasma-desorption MS demonstrated ionization of large peptides and polymers more than 10 years before the first descriptions of electrospray ionization (ESI) and matrix-assisted laser desorption/ionization (MALDI). As a result, significant effort was placed on development of ionization approaches, mass analysis, and detection approaches for very large molecules: even before the advent of ESI and MALDI. Since then, new analytical challenges and opportunities in plasma ionization have arisen. In this review, the emerging trends in plasma-based ionization for several areas of MS will be discussed, including molecular ionization, elemental ionization, hybrid elemental and molecular ion sources, and unique chemical transformations. © 2020 John Wiley & Sons Ltd. Mass Spec Rev.

Development of an inverse low-temperature plasma ionization source for liquid chromatography/mass spectrometry

RATIONALE

An argon inverse low-temperature plasma (iLTP) ionization source for liquid chromatography/tandem mass spectrometry was developed. The iLTP is constructed from simple chromatographic supply materials and is implemented into an atmospheric pressure chemical ionization (APCI) source replacing the APCI discharge needle electrode. The newly developed ion source was coupled to an ultra-high-performance liquid chromatography (UHPLC) system.

METHODS

The argon iLTP was characterized by optical emission spectroscopy. The soft ionization of selected standards was also demonstrated by direct infusion experiments. In addition to the use of argon as the discharge gas, helium, synthetic air, and oxygen were used, which were tested for their performance using testosterone and vitamin D₃ .

RESULTS

Spectroscopic measurements of the argon plasma were conducted, demonstrating the main emission band of argon metastables with corresponding energies of 11.53 eV and 11.72 eV. Infusion experiments indicate a gentle ionization by iLTP, e.g. caffeine, testosterone, reserpine, vitamin D₃ , and 25-hydroxyvitamin D₃ , which resulted in the corresponding protonated molecules. The splitless coupling with UHPLC (possible flow rates >1000 μL min^-1 ) shows promising results in interday repeatability (n = 10) for the substances with a relative standard deviation of less than 5% and limits of detection for caffeine, testosterone, reserpine, vitamin D₃ , and 25-hydroxyvitamin D₃ of 10 ng L^-1 , 50 ng L^-1 , 500 ng L^-1 , 5 μg L^-1 , and 5 μg L^-1 , respectively.

CONCLUSIONS

The argon iLTP ion source presented in this work shows promising approaches in the field of ionization of small organic molecules. The mechanism related to the discharge gas argon has not been elucidated so far and further investigations are needed. The iLTP ion source shows a very good performance with UHPLC coupling, even at increased flow rates. It could be shown that an argon iLTP can compete with the helium dielectric barrier discharge (DBD) preferred in the literature, making it a more economical choice.

Atmospheric Pressure Mass Spectrometry Imaging Using Laser Ablation, Followed by Dielectric Barrier Discharge Ionization

Mass spectrometry imaging (MSI) has become a powerful tool in diverse fields, for example, life science, biomaterials, and catalysis, for its ability of in situ and real-time visualization of the location of chemical compounds in samples. Although laser ablation (LA) achieves high spatial resolution in MSI, the ion yield can be very low. We therefore combined an LA system with an ambient ion source for post-ionization and an atmospheric pressure (AP) inlet mass spectrometer to construct a novel AP-MSI platform. A dielectric barrier discharge ionization (DBDI) source is operated in the "active sampling capillary" configuration, can be coupled to any mass spectrometer with an AP interface, and possesses high ion transmission efficiency. This study presents some application examples based on LA-DBDI, a low-cost and flexible strategy for AP-MSI, which does not require any sample pretreatment, and we show MS imaging of endogenous species in a traditional Chinese herbal medicine and of a drug molecule in zebra fish tissue, with a lateral resolution of ≈20 μm.

Rapid analysis of fragrance allergens by dielectric barrier discharge ionization mass spectrometry

RATIONALE

Fragrances are organic compounds with pleasant odors that are widely used in every aspect of our daily life; some fragrance ingredients can cause allergic reactions. Hence, the qualitative and quantitative analysis of fragrance allergens can prevent consumers coming into contact with these compounds. In this study, we evaluated the ability of a dielectric barrier discharge ionization (DBDI) source for analyzing allergens that occur in fragrances.

METHODS

A home-built liquid-infusion device was used to evaporate the liquid samples. An active capillary plasma ionization source, which is based on a dielectric barrier discharge, was used to ionize the analytes. Mass spectra were acquired in positive ion mode with an LTQ Orbitrap mass spectrometer.

RESULTS

Seven typical fragrance allergens were analyzed in this study. The limits of detections (LODs) were as low as 0.0001 ppm and a linear dynamic range of 2-3 orders of magnitude was achieved. Allergens in five different perfume products were successfully analyzed and quantified by this method, with analysis times of less than 1 min per sample.

CONCLUSIONS

This work introduces a DBDI-MS-based analytical method for detecting and quantifying fragrance allergens. Since DBDI has the advantages of high sensitivity, simple operation and fast analysis time, it is very suitable for the rapid analysis of trace allergens in fragrances, and could easily be used for quality control of consumer products in the cosmetics market.

Protein ion yield enhancement in matrix-assisted laser desorption/ionization mass spectrometry after sample and matrix low-pressure glow discharge plasma irradiation

RATIONALE

Plasma-assisted ionization is widely used in mass spectrometry; in this study, a low-pressure glow discharge is introduced as a new method to improve the detection of large proteins, and bovine serum albumin (BSA) is used as a protein model. The treatment of analyte, matrix, and the matrix/analyte mixture is evaluated under optimal conditions.

METHODS

Low-pressure radio-frequency capacitively coupled plasma (RF-CCP) treatment is utilized in the sample preparation step of matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) to enhance the protein MALDI ion signal. Plasma treatment can be an effective tool for enhancing the non-covalent binding of the analyte with the matrix, incorporation of the analyte into the matrix, production of matrix/analyte crystals, and analyte protonation through plasma activation, resulting in an improved MALDI ion signal.

RESULTS

Fourier-transform infrared (FTIR) spectroscopy allows us to distinguish between the functional groups of plasma-treated and control samples. In addition, optical emission spectroscopy (OES) determines the plasma species, and zeta potential analysis characterizes the potential difference between plasma-treated and control samples before MALDI-TOF MS analysis. Plasma-treated BSA can provide a five-times enhancement of ion intensity. The combination of the plasma-treated analyte with the plasma-treated matrix leads to an increase in the ion intensity by a factor of 14.

CONCLUSIONS

Low-pressure glow discharge plasma treatment greatly enhances MALDI ion signals, with a noticeable increase in incorporation, co-crystallization, protonation, and the concentration of the sample functional groups.

Rapid screening and quantitation of PAHs in water and complex sample matrices by solid-phase microextraction coupled to capillary atmospheric pressure photoionization-mass spectrometry

A capillary atmospheric pressure photoionization (cAPPI) source was used to analyze polycyclic aromatic hydrocarbons (PAHs) in complex matrices like grilled meat extract and urban dust reference material, as well as screening for PAHs in aqueous samples such as tap and lake water. A high-throughput workflow was developed that allowed rapid screening of unknown samples by direct solid-phase microextraction (SPME) coupled with cAPPI-MS, with confirmatory gas chromatography performed only for samples containing trace amounts of PAHs. Extraction times were as low as 15 s, with a total analysis time of 2 min per sample for screening. Limits of detections were in the low pg/ml range and in the subpg/ml range for the direct and chromatographic approach, respectively, with a linear dynamic range between two and three orders of magnitude, as determined for 15 model PAHs. This rapid approach represents an attractive way to screen samples containing nonpolar compounds using an ambient ionization source.

Atmospheric Pressure MALDI Mass Spectrometry Imaging Using In-Line Plasma Induced Postionization

Atmospheric pressure ionization methods confer a number of advantages over more traditional vacuum based techniques, in particular ease of hyphenation to a range of mass spectrometers. For atmospheric pressure matrix assisted desorption/ionization (AP-MALDI), several ion sources, operating in a range of geometries have been reported. Most of these platforms have, to date, generally demonstrated relatively low ion yields and/or poor ion transmission compared to vacuum sources. To improve the detection of certain ions, we have developed a second-generation transmission mode (TM) AP-MALDI imaging platform with in-line plasma postionization using the commercially available SICRIT device, replacing the previously used low temperature plasma probe from our developmental AP-TM-MALDI stage. Both plasma devices produce a significant ionization enhancement for a range of compounds, but the overall higher enhancement obtained by the SICRIT device in addition to the ease of installation and the minimal need for optimization presents this commercially available tool as an attractive method for simple postionization in AP-MALDI MSI.

Ambient (desorption/ionization) mass spectrometry methods for pesticide testing in food: a review

Ambient mass spectrometry refers to the family of techniques that allows ions to be generated from condensed phase samples under ambient conditions and then, collected and analysed by mass spectrometry. One of their key advantages relies on their ability to allow the analysis of samples with minimal to no sample workup. This feature maps well to the requirements of food safety testing, in particular, those related to the fast determination of pesticide residues in foods. This review discusses the application of different ambient ionization methods for the qualitative and (semi)quantitative determination of pesticides in foods, with the focus on different specific methods used and their ionization mechanisms. More popular techniques used are those commercially available including desorption electrospray ionization (DESI-MS), direct analysis on real time (DART-MS), paper spray (PS-MS) and low-temperature plasma (LTP-MS). Several applications described with ambient MS have reported limits of quantitation approaching those of reference methods, typically based on LC-MS and generic sample extraction procedures. Some of them have been combined with portable mass spectrometers thus allowing "in situ" analysis. In addition, these techniques have the ability to map surfaces (ambient MS imaging) to unravel the distribution of agrochemicals on crops.

The current role of mass spectrometry in forensics and future prospects

Mass spectrometry (MS) techniques are highly prevalent in crime laboratories, particularly those coupled to chromatographic separations like gas chromatography (GC) and liquid chromatography (LC). These methods are considered "gold standard" analytical techniques for forensic analysis and have been extensively validated for producing prosecutorial evidentiary data. However, factors such as growing evidence backlogs and problematic evidence types (e.g., novel psychoactive substance (NPS) classes) have exposed limitations of these stalwart techniques. This critical review serves to delineate the current role of MS methods across the broad sub-disciplines of forensic science, providing insight on how governmental steering committees guide their implementation. Novel, developing techniques that seek to broaden applicability and enhance performance will also be highlighted, from unique modifications to traditional hyphenated MS methods to the newer "ambient" MS techniques that show promise for forensic analysis, but need further validation before incorporation into routine forensic workflows. This review also expounds on how recent improvements to MS instrumental design, scan modes, and data processing could cause a paradigm shift in how the future forensic practitioner collects and processes target evidence.

Nanosecond Pulsed Dielectric Barrier Discharge Ionization Mass Spectrometry

Dielectric barrier discharge ionization (DBDI) is an emerging technique for ionizing volatile molecules directly from complex mixtures for sensitive detection by mass spectrometry (MS). In conventional DBDI, a high frequency and high voltage waveform with pulse widths of ∼50 μs (and ∼50 μs between pulses) is applied across a dielectric barrier and a gas to generate "low temperature plasma." Although such a source has the advantages of being compact, economical, robust, and sensitive, background ions from the ambient environment can be formed in high abundances, which limits performance. Here, we demonstrate that high voltage pulse widths as narrow as 100 ns with a pulse-to-pulse delay of ∼900 μs can significantly reduce background chemical noise and increase ion signal. Compared to microsecond pulses, ∼800 ns pulses can be used to increase the signal-to-noise and signal-to-background chemical noise ratios in DBDI-MS by up to 172% and 1300% for six analytes, including dimethyl methylphosphonate (DMMP), 3-octanone, and perfluorooctanoic acid. Using nanosecond pulses, the detection limit for DMMP and PFOA in human blood plasma can be lowered by more than a factor of 2 in comparison to microsecond pulses. In "nanopulsed" plasma ionization, the extent of internal energy deposition is as low as or lower than in electrospray ionization and micropulsed plasma ionization based on thermometer ion measurements. Overall, nanosecond high-voltage pulsing can be used to significantly improve the performance of DBDI-MS and potentially other ion sources involving high voltage waveforms.

Analyte-Tailored Controlled Atmosphere Improves Dielectric Barrier Discharge Ionization Mass Spectrometry Performance

Plasma sources in atmospheric pressure soft-ionization mass spectrometry have gained significant interest in recent years. As many of these sources are used under ambient air conditions, their interaction with the surrounding atmosphere plays an important role in the ionization pathway. This study focuses on the interaction between the plasma source and the surrounding atmosphere by connecting the plasma source to the mass spectrometer using a 2 mm ID closed reactant capillary supplied by a reactant gas up to 500 mL per minute to gain a controlled atmosphere. Different reactant gases (Ar, He, O₂, and N₂) and reactant gas mixtures are tested with regard to the DBDI performance and then used to improve the ionization efficiency. Tailoring the controlled atmosphere for a certain analyte, for example, perfluorinated compounds, leads to significantly improved limits of detection up to 2 ppb.

Flexible Microtube Plasma (FμTP) as an Embedded Ionization Source for a Microchip Mass Spectrometer Interface

Dielectric barrier discharges are used as soft ionization sources for mass spectrometers or ion mobility spectrometers, enabling excellent possibilities for analytical applications. A new robust and small-footprint discharge design, flexible microtube plasma (FμTP), developed as a result of ongoing miniaturization and electrode design processes, is presented in this work. This design provides major safety benefits by fitting the electrode into an inert flexible fused silica capillary (tube). Notably, in this context, the small discharge dimensions enable very low gas flows in the range of <100 mL min^-1; portability; the use of hydrogen, nitrogen, and air in addition to noble gases such as helium and argon, including its mixtures with propane; and application in microchip environments. By coupling FμTP with gas chromatography/mass spectrometry, we show that the polarity principle of the new discharge design allows it to outperform established ionization sources such as dielectric barrier discharge for soft ionization (DBDI) and low-temperature plasma (LTP) at low concentrations of perfluoroalkanes in terms of sensitivity, ionization efficiency, chemical background, linear dynamic range, and limit of detection by a large margin. In negative ion mode, the limit of detection is improved by more than 3-fold compared with that of DBDI and by 8-fold compared with that of LTP. The protonation capability was evaluated by headspace measurements of diisopropyl methylphosphonate in positive ion mode, showing low fragmentation and high stability in comparison to DBDI and LTP.

Screening of semifluorinated n-alkanes by gas chromatography coupled to dielectric barrier discharge ionization mass spectrometry

RATIONALE

The potential of an atmospheric pressure ionization source based on a dielectric barrier discharge in helium for the hyphenation of gas chromatography and mass spectrometry (GC/DBDI-MS) has been demonstrated only recently and for a limited range of compounds. Due to its 'soft' ionization properties and the possibility to choose from a variety of atmospheric pressure ionization MS instruments, GC/DBDI-MS has the potential to be an interesting alternative to 'classic' GC/MS techniques.

METHODS

The hyphenation of GC with DBDI-MS at atmospheric pressure is used for the determination of semifluorinated n-alkanes in ski wax samples.

RESULTS

Different to perfluorinated n-alkanes, which are typically detected as [M - F + O]^- and [M - F]^- , semifluorinated n-alkanes can be detected both in positive mode as [M - 3H + nO]⁺ and [M - H + nO]⁺ (n = 0, 1, 2, and 3) ions, as well as in negative mode as a fragment ion representing the fluorinated part of the respective semifluorinated n-alkane. The method allowed the sensitive detection of semifluorinated n-alkanes with achievable limits of detection (LODs) in the single digit pg range injected on column. To examine the applicability of the GC/DBDI-MS method, semifluorinated n-alkanes were determined in fluorinated ski waxes. Results were confirmed by complimentary GC/electron ionization MS measurements.

CONCLUSIONS

The unique SFA ionization patterns serve for complementary unambiguous identification of semifluorinated n-alkane species in positive mode and screening of contained n-alkanes fluorinated chain lengths in negative mode.

Mechanistic Understanding Leads to Increased Ionization Efficiency and Selectivity in Dielectric Barrier Discharge Ionization Mass Spectrometry: A Case Study with Perfluorinated Compounds

Perfluorinated compounds have unique properties and many practical applications, but are difficult to ionize efficiently with soft ionization methods. An active capillary plasma ionization source based on dielectric barrier discharge ionization (DBDI) coupled with mass spectrometry was used to study the ionization pathway of perfluorinated compounds (PFCs), with the aim of both increasing the ionization efficiency and influencing the selectivity for generating product ions in negative ion mode. Cyclic and linear perfluorinated alkanes were found to mainly form [M - F]^- and [M - F + O]^- ions, respectively; the [M]^-• ion was only obtained at low discharge voltage. Additionally, fluorine attachment [M + F]^- was observed mostly for perfluorinated alkenes. An isotope labeling experiment with ¹⁸O₂ showed that the primary source of oxygen in the substitution reaction is molecular oxygen, reacting with the analyte in the form of O^-• ions. The abundance of [M - F + O]^- ions can thus be enhanced by increasing the plasma voltage to produce a higher O^-• ion density. The loss of the fluorine (without substitution by oxygen) was mainly observed at high frequency, a fact which can be exploited for tuning the ionization toward specific product ions. Overall, the mechanistic understanding of the ionization of PFCs allowed to increase the selectivity of the product ions, resulting in increased ionization efficiency.

A quantitative approach for pesticide analysis in grape juice by direct interfacing of a matrix compatible SPME phase to dielectric barrier discharge ionization-mass spectrometry

We evaluated the performance of a dielectric barrier discharge ionization (DBDI) source for pesticide analysis in grape juice, a fairly complex matrix due to the high content of sugars (≈20% w/w) and pigments.

Effects of Different Waveforms on the Performance of Active Capillary Dielectric Barrier Discharge Ionization Mass Spectrometry

Active capillary dielectric barrier discharge ionization (DBDI) is emerging as a compact, low-cost, and robust method to form intact ions of small molecules for detection in near real time by portable mass spectrometers. Here, we demonstrate that by using a 10 kHz, ~2.5 kV_p-p high-voltage square-wave alternating current plasma, active capillary DBDI can consume less than 1 μW of power. In contrast, the power consumed using a sine and triangle alternating current waveform is more than two orders of magnitude higher than that for the square waveform to obtain a similar voltage for plasma generation. Moreover, the plasma obtained using a square waveform can be significantly more homogenous than that obtained using sine and triangle waveforms. Protonated dimethyl methylphosphonate (DMMP) and deprotonated perfluorooctanoic acid (PFOA) can be detected at about the same or higher abundances using square-wave DBDI mass spectrometry compared with the use of sine and triangle waveforms. By use of benzylammonium thermometer ions, the extent of internal energy deposition using square, sine, or triangle waveform excited plasmas are essentially the same at the optimum voltages for ion detection. Using an H-bridge circuit driving a transformer optimized to reduce losses, square-wave active capillary DBDI can be continuously powered for ~50 h by common 9 V-battery (PP3). Graphical Abstract ᅟ.

Internal Energy Deposition in Dielectric Barrier Discharge Ionization is Significantly Lower than in Direct Analysis in Real-Time Mass Spectrometry

The extent of internal energy deposition using three different plasma-based ionization mass spectrometry (MS) methods, atmospheric pressure chemical ionization (APCI), direct analysis in real time (DART), and active capillary dielectric barrier discharge ionization (DBDI), was investigated using benzylammonium ‘thermometer’ ions. Ions formed by DBDI were activated significantly less than those that were formed by DART and APCI under these conditions. Thermal ion activation by DART can be reduced slightly by positioning the DART source further from the capillary entrance to the MS and reducing the heat that is applied to metastable atoms exiting the DART source. For example, the average ion internal energy distribution decreased by less than 10 % (166.9 ± 0.3 to 152.2 ± 1.0 kJ mol−1) when the distance between the DART source and the MS was increased by 250 % (10 to 25 mm). By lowering the DART temperature from 350 to 150°C, the internal energy distributions of the thermometer ions decreased by ~15 % (169.93 ± 0.83 to 150.21 ± 0.52 kJ mol−1). Positioning the DART source nozzle more than 25 mm from the entrance to the MS and decreasing the DART temperature further resulted in a significant decrease in ion signal. Thus, varying the major DART ion source parameters had minimal impact on the ‘softness’ of the DART ion source under these conditions. Overall, these data indicate that DBDI can be a significantly ‘softer’ ion source than two of the most widely used plasma-based ion sources that are commercially available.

Atmospheric pressure soft ionization for gas chromatography with dielectric barrier discharge ionization-mass spectrometry (GC-DBDI-MS)

In this study, a gas chromatography (GC) system was interfaced to a high-resolution Orbitrap mass spectrometer by means of an active capillary plasma ionization source, based on dielectric barrier discharge ionization (DBDI).

A Radical-Mediated Pathway for the Formation of [M + H](+) in Dielectric Barrier Discharge Ionization

Active capillary plasma ionization is a highly efficient ambient ionization method. Its general principle of ion formation is closely related to atmospheric pressure chemical ionization (APCI). The method is based on dielectric barrier discharge ionization (DBDI), and can be constructed in the form of a direct flow-through interface to a mass spectrometer. Protonated species ([M + H](+)) are predominantly formed, although in some cases radical cations are also observed. We investigated the underlying ionization mechanisms and reaction pathways for the formation of protonated analyte ([M + H](+)). We found that ionization occurs in the presence and in the absence of water vapor. Therefore, the mechanism cannot exclusively rely on hydronium clusters, as generally accepted for APCI. Based on isotope labeling experiments, protons were shown to originate from various solvents (other than water) and, to a minor extent, from gaseous impurities and/or self-protonation. By using CO2 instead of air or N2 as plasma gas, additional species like [M + OH](+) and [M - H](+) were observed. These gas-phase reaction products of CO2 with the analyte (tertiary amines) indicate the presence of a radical-mediated ionization pathway, which proceeds by direct reaction of the ionized plasma gas with the analyte. The proposed reaction pathway is supported with density functional theory (DFT) calculations. These findings add a new ionization pathway leading to the protonated species to those currently known for APCI. Graphical Abstract ᅟ.

Direct and Sensitive Detection of CWA Simulants by Active Capillary Plasma Ionization Coupled to a Handheld Ion Trap Mass Spectrometer

An active capillary plasma ionization (ACI) source was coupled to a handheld mass spectrometer (Mini 10.5; Aston Labs, West Lafayette, IN, USA) and applied to the direct gas-phase detection and quantification of chemical warfare agent (CWA) related chemicals. Complementing the discontinuous atmospheric pressure interface (DAPI) of the Mini 10.5 mass spectrometer with an additional membrane pump, a quasi-continuous sample introduction through the ACI source was achieved. Nerve agent simulants (three dialkyl alkylphosphonates, a dialkyl phosporamidate, and the pesticide dichlorvos) were detected at low gas-phase concentrations with limits of detection ranging from 1.0 μg/m(3) to 6.3 μg/m(3). Our results demonstrate a sensitivity enhancement for portable MS-instrumentation by using an ACI source, enabling direct, quantitative measurements of volatile organic compounds. Due to its high sensitivity, selectivity, low power consumption (<80 W) and weight (<13 kg), this instrumentation has the potential for direct on-site CWA detection as required by military or civil protection. Graphical Abstract ᅟ.