Reactive paper spray mass spectrometry for rapid analysis of formaldehyde in facial masks

Simultaneous Detection of Aldehyde Metabolites by Light-Assisted Ambient Ionization Mass Spectrometry

In the clinic, small-molecule metabolites (SMMs) in blood are highly convincing indicators for disease diagnosis, such as cancer. However, challenges still exist for detection of SMMs due to their low concentration and complicated components in blood. In this work, we report the design of a novel "selenium signature" nanoprobe (Se nanoprobe) for efficient identification of multiple aldehyde metabolites in blood. This Se nanoprobe consists of magnetic nanoparticles that can enrich aldehyde metabolites from a complex environment, functionalized with photosensitive "selenium signature" hydrazide molecules that can react with aldehyde metabolites. Upon irradiation with UV, the aldehyde derivatives can be released from the Se nanoprobe and further sprayed by mass spectrometry through ambient ionization (AIMS). By quantifying the selenium isotope distribution (MS/MS) from the derivatization product, accurate detection of several aldehyde metabolites, including valeraldehyde (Val), heptaldehyde (Hep), 2-furaldehyde (2-Fur), 10-undecenal aldehyde (10-Und), and benzaldehyde (Ben), is realized. This strategy reveals a new solution for quick and accurate cancer diagnosis in the clinic.

Plasma-Excited Nebulizer Gas-Assisted Electrospray Ionization: Enhancing the Sensitivity of Pesticide in Mass Spectrometry

Liquid chromatography-mass spectrometry (LC-MS) is widely used in the detection of pesticide residues. However, the detection sensitivity of low-polarity pesticides by commonly used electrospray ionization may be severely suppressed, which greatly affects the limit of detection and repeatability. Herein, a plasma-excited nebulizer gas-assisted electrospray ionization (PENG-ESI) device has been developed. By introducing the discharge plasma formed by Tesla coil into the electrospray nebulizer gas channel, the sensitivity of low-polarity pesticides was significantly increased while maintaining sensitivity to polar pesticides. Under the optimized conditions, the limit of detection for S-bioallethrin was achieved at the level of 100 pg/g with good linearity (R2 > 0.99) and precision (RSD ≤ 4.61%). The matrix effect of a series of spiked matrix samples is less than 13.1%. Finally, different pyrethroid pesticide residues were successfully analyzed without separation, highlighting that the technology has potential application prospects in food quality control, environmental monitoring, and other fields.

Applications of mass spectrometry in cosmetic analysis: An overview

Mass spectrometry (MS) is a crucial tool in cosmetic analysis. It is widely used for ingredient screening, quality control, risk monitoring, authenticity verification, and efficacy evaluation. However, due to the diversity of cosmetic products and the rapid development of MS-based analytical methods, the relevant literature needs a more systematic collation of information on this subject to unravel the true potential of MS in cosmetic analysis. Herein, an overview of the role of MS in cosmetic analysis over the past two decades is presented. The currently used sample preparation methods, ionization techniques, and types of mass analyzers are demonstrated in detail. In addition, a brief perspective on the future development of MS for cosmetic analysis is provided.

Cellulose paper sorptive extraction (CPSE): A simple and affordable microextraction method for analysis of basic drugs in blood as a proof of concept

Aiming towards simplifying sample preparation procedure, the present work explores use of unmodified laboratory filter paper as sorbent for extraction of nine basic drugs (five antidepressants, four benzodiazepines, and ketamine) from human blood samples and their analysis by gas chromatography-mass spectrometry (GC-MS). The procedure termed as cellulose paper sorptive extraction (CPSE) is straightforward. It involves adsorption of target analytes from deproteinized diluted blood samples on the unmodified cellulose paper followed by elution into 2 mL of methanol. Multivariate optimization, consisting of Placket-Burman design (PBD) and central composite design (CCD), was used to screen and optimize significant factors for CPSE. The proposed method follows the principles of green analytical chemistry (GAC), as the unmodified filter paper used as the sorbent is inexpensive and biodegradable. The technique is easy to perform and requires only 2 mL of MeOH during the entire extraction procedure. Under the optimized conditions, the limit of detection and quantification for the target analytes were estimated to be in the range of 0.003-0.035 and 0.010-0.117 µg mL^-1, respectively. In contrast, the relative standard deviations were consistently below 10 %. The calibration curves were linear in the range of 0.015-2 µg mL^-1 with a coefficient of determination (R²) in the range of 0.995-0.999.Satisfactory recoveries ranging from 87 to 99 % was achieved. As proof of concept, the analysis of nine drugs in blood samples from the patients was performed to demonstrate the potential application of the proposed method.

Suzuki C-C Coupling in Paper Spray Ionization: Microsynthesis of Biaryls and High-Sensitivity MS Detection of Aryl Bromides

Suzuki-Miyaura cross-coupling is one of the most powerful strategies for constructing biaryl compounds. However, classic Suzuki-Miyaura coupling suffers from hour-scale reaction time and competitive protodeboronation. To address these problems, a mild nonaqueous potassium trimethylsilanolate (TMSOK)-assisted Suzuki-Miyaura coupling strategy was designed for the microsynthesis of biaryls in paper spray ionization (PSI). Due to the acceleration power facilitated by microdroplet chemistry in reactive PSI, the microsynthesis of biaryls by reactive PSI was accomplished within minutes with comparable yields to the bulk, showing good substrate applicability from 32 Suzuki-Miyaura reactions of aryl bromides and aryl boronic acid/borates bearing different substituents. Based on the above TMSOK-assisted Suzuki-Miyaura coupling strategy, we further developed a high-sensitivity and selective PSI mass spectrometry (MS) method for quantitative analysis of aryl bromides, a class of environmentally persistent organic pollutants that cannot be directly detected by ambient mass spectrometry due to their low ionization efficiency. In situ derivatization of aryl bromides was achieved with aryl borates bearing quaternary ammonium groups in PSI. The proposed PSI-MS method shows good linearity over the 0.01-10 μmol L^-1 range with low detection limits of 1.8-4.8 nmol L^-1 as well as good applicability to the rapid determination of six aryl bromides in three environmental water samples. The proposed PSI-MS method also shows good applicability to brominated flame retardants (polybrominated diphenyls/diphenyl esters). Overall, this study provides a simple, rapid, low-cost, high-sensitivity, and high-selectivity strategy for trace aryl bromides and other brominated pollutants in real samples with minimal/no sample pretreatment.

Contact allergy to and allergic contact dermatitis from formaldehyde and -releasers: A clinical review and update

This review aims to provide a clinically useful update regarding the role of formaldehyde (FA) and its five main releasers (FRs) quaternium-15, diazolidinyl urea, DMDM hydantoin, imidazolidinyl urea and 2-bromo-2-nitropropane-1,3-diol (bronopol) in contact allergy and allergic contact dermatitis. These ubiquitous preservatives are still often, and sometimes undeclared, present in cosmetics, pharmaceuticals, medical devices, household detergents and chemical (industrial) products. In Europe, the use of free FA and quaternium-15 in cosmetics is forbidden and contact allergy rates have been found to be stable to decreasing. However, FA/FRs still readily provoke localized (e.g., facial/hand), airborne and generalized dermatitis, and may also complicate atopic and stasis dermatitis, or result in nummular dermatitis. Seborrheic-, rosacea- and impetigo-like dermatitis have recently been reported. For a correct diagnosis, FA 2% aq. (0.60 mg/cm² ) should be used, and particularly the FRs bronopol 0.5% pet. and diazolidinyl urea 2% should be patch tested separately in a baseline series. If sensitization to FA occurs, both FA and FRs should preferably be avoided, except perhaps for bronopol in case it tests negatively. If a patient reacts to one or more FRs (such as bronopol, or diazolidinyl/imidazolidinyl urea), but not to FA, then the specific FR(s) should be avoided. This article is protected by copyright. All rights reserved.

Unmodified cellulose filter paper, a sustainable and affordable sorbent for the isolation of biogenic amines from beer samples

While current trends in Green Analytical Chemistry aim at reducing or simplifying sample treatment, food usually comprises complex matrices where direct analysis is not possible in most cases. In this context, sample treatment plays a pivotal role. Biogenic amines are naturally formed in many foodstuffs due to the action of microorganisms, while their presence has been associated with adverse health effects. In this work, the extraction of seven biogenic amines (cadaverine, histamine, phenylethylamine, putrescine, spermidine, spermine, and tyramine) from beer samples has been simplified using laboratory filter paper as sorbent without any further modification. The analysis of the eluates by direct infusion mass spectrometry reduces the time of analysis, increasing the sample throughput. This simple but effective method enabled the determination of the analytes with limits of detection as low as 0.06 mg L^-1 and relative standard deviations better than 11.9%. The suitability of the method has been assessed by analyzing eight different types of beers by the standard addition method.