The X-ray photoelectron spectra of Ir, IrO2 and IrCl3 revisited

IrSn Bimetallic Clusters Confined in MFI Zeolites for CO Selective Catalytic Reduction of NOx in the Presence of Excess O2

We developed a simple strategy for preparing IrSn bimetallic clusters encapsulated in pure silicon zeolites via a one-pot hydrothermal synthesis by using diethylamine as a stabilizing agent. A series of investigations verified that metal species have been confined successfully in the inner of MFI zeolites. IrSn bimetallic cluster catalysts were efficient for the CO selective catalytic reduction of NOx in the presence of excess O2. Furthermore, the 13CO temperature-programmed surface reaction results demonstrated that NO2 and N2O could form when most of the CO was transformed into CO2 and that Sn modification could passivate CO oxidation on the IrSn bimetallic clusters, leading to more reductants that could be used for NOx reduction at high temperatures. Furthermore, SO2 can also influence the NOx conversion by inhibiting the oxidation of CO. This study provides a new strategy for preparing efficient environmental catalysts with a high dispersion of metal species.

Iridium oxide-based non-enzymatic glucose sensor: Superior electro-catalytic performance in biological environmental media

Nanostructured inorganic materials have potential advantages as glucose-sensing elements in diabetes care, thereby circumventing the need for expensive enzymatic agents. However, many nonenzymatic sensors face challenges related to selectivity and reliability, reducing their efficacy in body fluids. In this study, we introduce an Iridium oxide (IrO2)-based non-enzymatic glucose sensor. This sensor demonstrates exceptional electro-catalytic properties in human serum, characterized by high sensitivity (638 μA μM-1cm2) and a consistent recovery rate (∼104%) across 15 cycles in saline. Furthermore, its impressive performance in human serum, as evidenced by a low relative standard deviation (RSD <1.57%), underscores its applicability in biological matrices such as interstitial fluids. Overall, the IrO2 sensor is a promising, highly reversible, economical, and simple method for detecting glucose in continuous monitoring systems.

Synthesis of novel chitosan/sodium hyaluronate/iridium hydrogel nanocomposite for wound healing application

A novel chitosan/sodium hyaluronate/iridium (CHI/SH/Ir) hydrogel nanocomposite with a unique microstructure containing vertically aligned pores is fabricated via an electrophoresis technique. The formation of orderly vertical pores in CHI/SH/Ir hydrogel nanocomposite is due to the confinement of hydrogen bubbles produced from the water electrolysis during electrophoresis that limits their lateral movement and coalescence. In a wet state, the diameter for the vertical pores is 600-700 μm. With a thickness of 500 μm, the CHI/SH/Ir hydrogel nanocomposite exhibits a porosity of 76.7 % and a water uptake of 350 %. Its tensile strength is almost doubled to 8.7 MPa, as compared to that of counterpart without the addition of iridium. In CHI/SH/Ir hydrogel nanocomposite, the iridium nanoparticles are homogeneously distributed with an average size of 3 nm. The CHI/SH/Ir electrophoresis suspension exhibits a negligible cytotoxicity. In cell migration test using the human keratinocytes HaCaT cells, the CHI/SH/Ir hydrogel nanocomposite reveals a relative migration of 122.15 ± 9.02 % (p < 0.001) as compared to the blank sample. The presence of vertically aligned pores with the use of SH and iridium nanoparticles indicates a promising opportunity in wound healing application.

3D Noble-Metal Nanostructures Approaching Atomic Efficiency and Atomic Density Limits

Noble metals have been widely used in catalysis, however, the scarcity and high cost of noble metal motivate researchers to balance the atomic efficiency and atomic density, which is formidably challenging. This article proposes a robust strategy for fabricating 3D amorphous noble metal-based oxides with simultaneous enhancement on atomic efficiency and density with the assistance of atomic channels, where the atomic utilization increases from 18.2% to 59.4%. The unique properties of amorphous bimetallic oxides and formation of atomic channels have been evidenced by detailed experimental characterizations and theoretical simulations. Moreover, the universality of the current strategy is validated by other binary oxides. When Cu2IrOx with atomic channels (Cu2IrOx-AE) is used as catalyst for oxygen evolution reaction (OER), the mass activity and turnover frequency value of Cu2IrOx-AE are 1-2 orders of magnitude higher than CuO/IrO2 and Cu2IrOx without atomic channels, largely outperforming the reported OER catalysts. Theoretical calculations reveal that the formation of atomic channels leads to various Ir sites, on which the proton of adsorbed *OH can transfer to adjacent O atoms of [IrO6]. This work may attract immediate interest of researchers in material science, chemistry, catalysis, and beyond.

Microdrop-confined synthesis and regulation of porous hollow Ir-based catalysts for the mass transfer-enhanced electrolysis of pure water

Maximally exploiting the active sites of iridium catalysts is essential for building low-cost proton exchange membrane (PEM) electrolyzers for green H2 production. Herein, we report a novel microdrop-confined fusion/blasting (MCFB) strategy for fabricating porous hollow IrO1-x microspheres (IrO1-x-PHM) by introducing explosive gas mediators from a NaNO3/glucose mixture. Moreover, the developed MCFB strategy is demonstrated to be general for synthesizing a series of Ir-based composites, including Ir-Cu, Ir-Ru, Ir-Pt, Ir-Rh, Ir-Pd, and Ir-Cu-Pd and other noble metals such as Rh, Ru, and Pt. The hollow structures can be regulated using different organics with NaNO3. The assembled PEM electrolyzer with IrO1-x-PHM as the anode catalyst (0.5 mg/cm2) displays an impressive polarization voltage of 1.593 and 1.726 V at current densities of 1 and 2A/cm2, respectively, outperforming commercial IrOx catalysts and most of the ever-reported iridium catalysts with such low catalyst loading. More importantly, the breakdown of the polarization loss indicates that the improved performance is due to the facilitated mass transport induced by the hollowness. This study offers a versatile platform for fabricating efficient Ir-based catalysts for PEM electrolyzers and beyond.

Sub-10-nm-sized Au@AuxIr1-x metal-core/alloy-shell nanoparticles as highly durable catalysts for acidic water splitting

The absence of efficient and durable catalysts for oxygen evolution reaction (OER) is the main obstacle to hydrogen production through water splitting in an acidic electrolyte. Here, we report a controllable synthesis method of surface IrOx with changing Au/Ir compositions by constructing a range of sub-10-nm-sized core-shell nanocatalysts composed of an Au core and AuxIr1-x alloy shell. In particular, Au@Au0.43Ir0.57 exhibits 4.5 times higher intrinsic OER activity than that of the commercial Ir/C. Synchrotron X-ray-based spectroscopies, electron microscopy and density functional theory calculations revealed a balanced binding of reaction intermediates with enhanced activity. The water-splitting cell using a load of 0.02 mgIr/cm2 of Au@Au0.43Ir0.57 as both anode and cathode can reach 10 mA/cm2 at 1.52 V and maintain activity for at least 194 h, which is better than the cell using the commercial couple Ir/C‖Pt/C (1.63 V, 0.2 h).

Novel sulfate solid supported binary Ru-Ir oxides for superior electrocatalytic activity towards OER and CER

Electrolysis for producing hydrogen powered by renewable electricity can be dramatically expanded by adapting different electrolytes (brine, seawater or pure water), which means the anode materials must stand up to complex electrolyte conditions. Here, a novel catalyst/support hybrid of binary Ru3.5Ir1Ox supported by barium strontium sulfate (BaSrSO4) was synthesized (RuIrOx/BSS) by exchanging the anion ligands of support. The as-synthesized RuIrOx/BSS exhibits compelling oxygen evolution (OER) and chlorine evolution (CER) performances, which affords to 10 mA cm-2 with only overpotential of 244 mV and 38 mV, respectively. The performed X-ray adsorption spectra clearly indicate the presence of an interface charge transfer effect, which results in the assignment of more electrons to the d orbitals of the Ru and Ir sites. The theoretical calculations demonstrated that the electronic structures of the catalytic active sites were modulated to give a lower overpotential, confirming the intrinsically high OER and CER catalytic activity.

Universal Synthesis of Amorphous Metal Oxide Nanomeshes

Constructing the pore structures in amorphous metal oxide nanosheets can enhance their electrocatalytic performance by efficiently increasing specific surface areas and facilitating mass transport in electrocatalysis. However, the accurate synthesis for porous amorphous metal oxide nanosheets remains a challenge. Herein, a facile nitrate-assisted oxidation strategy is reported for synthesizing amorphous mesoporous iridium oxide nanomeshes (a-m IrOx NMs) with a pore size of ∼4 nm. X-ray absorption characterizations indicate that a-m IrOx NMs possess stretched Ir─O bonds and weaker Ir-O interaction compared with commercial IrO2. Combining thermogravimetric-fourier transform infrared spectroscopy with differential scanning calorimetry measurements, it is demonstrated that sodium nitrate, acting as an oxidizing agent, is conducive to the formation of amorphous nanosheets, while the NO2 produced by the in situ decomposition of nitrates facilitates the generation of pores within the nanomeshes. As an anode electrocatalyst in proton exchange membrane water electrolyzer, a-m IrOx NMs exhibit superior performance, maintaining a cell voltage of 1.67 V at 1 A cm-2 for 120 h without obvious decay with a low loading (0.4 mgcatalyst cm-2). Furthermore, the nitrate-assisted method is demonstrated to be a general approach to prepare various amorphous metal oxide nanomeshes, including amorphous RhOx, TiOx, ZrOx, AlOx, and HfOx nanomeshes.

Engineering the Coordination Environment of Ir Single Atoms with Surface Titanium Oxide Amorphization for Superior Chlorine Evolution Reaction

The chlorine evolution reaction (CER) is essential for industrial Cl2 production but strongly relies on the use of dimensionally stable anode (DSA) with high-amount precious Ru/Ir oxide on a Ti substrate. For the purpose of sustainable development, precious metal decrement and performance improvement are highly desirable for the development of CER anodes. Herein, we demonstrate that surface titanium oxide amorphization is crucial to regulate the coordination environment of stabilized Ir single atoms for efficient and durable chlorine evolution of Ti monolithic anodes. Experimental and theoretical results revealed the formation of four-coordinated Ir1O4 and six-coordinated Ir1O6 sites on amorphous and crystalline titanium oxides, respectively. Interestingly, the Ir1O4 sites exhibited a superior CER performance, with a mass activity about 10 and 500 times those of the Ir1O6 counterpart and DSA, respectively. Moreover, the Ir1O4 anode displayed excellent durability for 200 h, far longer than that of its Ir1O6 counterpart (2 h). Mechanism studies showed that the unsaturated Ir in Ir1O4 was the active center for chlorine evolution, which was changed to the top-coordinated O in Ir1O6. This change of active sites greatly affected the adsorption energy of Cl species, thus accounting for their different CER activity. More importantly, the amorphous structure and restrained water dissociation of Ir1O4 synergistically prevent oxygen permeation across the Ti substrate, contributing to its long-term CER stability. This study sheds light on the importance of single-atom coordination structures in the reactivity of catalysts and offers a facile strategy to prepare highly active single-atom CER anodes via surface titanium oxide amorphization.

Electron Spin Selective Iridium Electrocatalysts for the Oxygen Evolution Reaction

Highly efficient electrocatalysts for water electrolysis are crucial to the widespread commercialization of the technology and an important step forward toward a sustainable energy future. In this study, an alternative method for boosting the electrocatalytic activity toward the oxygen evolution reaction (OER) of a well-known electrocatalyst (iridium) is presented. Iridium nanoparticles (2.1 ± 0.2 nm in diameter) functionalized with chiral molecules were found to markedly enhance the activity of the OER when compared to unfunctionalized and achiral functionalized iridium nanoparticles. At a potential of 1.55 V vs Reference Hydrogen Electrode (RHE), chiral functionalized iridium nanoparticles exhibited an average 85% enhancement in activity with respect to unfunctionalized iridium nanoparticles compared to an average 13% enhancement for the achiral functionalized iridium nanoparticle. This activity enhancement is attributed to a spin-selective electron transfer mechanism taking place on the chiral functionalized catalysts, a characteristic induced by the chirality of the ligand. This alternative path for the OER drastically reduces the production of hydrogen peroxide, which was confirmed via a colorimetric method.

Dynamic chloride ion adsorption on single iridium atom boosts seawater oxidation catalysis

Seawater electrolysis offers a renewable, scalable, and economic means for green hydrogen production. However, anode corrosion by Cl- pose great challenges for its commercialization. Herein, different from conventional catalysts designed to repel Cl- adsorption, we develop an atomic Ir catalyst on cobalt iron layered double hydroxide (Ir/CoFe-LDH) to tailor Cl- adsorption and modulate the electronic structure of the Ir active center, thereby establishing a unique Ir-OH/Cl coordination for alkaline seawater electrolysis. Operando characterizations and theoretical calculations unveil the pivotal role of this coordination state to lower OER activation energy by a factor of 1.93. The Ir/CoFe-LDH exhibits a remarkable oxygen evolution reaction activity (202 mV overpotential and TOF = 7.46 O2 s-1) in 6 M NaOH+2.8 M NaCl, superior over Cl--free 6 M NaOH electrolyte (236 mV overpotential and TOF = 1.05 O2 s-1), with 100% catalytic selectivity and stability at high current densities (400-800 mA cm-2) for more than 1,000 h.

Unveiling Valence State-Dependent Photocatalytic Water Splitting Activity and Photocathodic Behavior in Visible Light-Active Iridium-Doped BaTiO3

Despite having favorable energetics and tunable optoelectronic properties, utilization of BaTiO3 (BTO) for photocatalytic reactions is limited by its absorption only in the ultraviolet region. To address this challenge, BTO is doped with iridium (Ir) to induce visible light absorption. The visible light-induced photocatalytic H2 generation efficiency is enhanced by 2 orders of magnitude on selective conversion of the Ir valence state from Ir4+ to Ir3+. To understand such intriguing behavior, valence state-dependent changes in the optoelectronic, structural, and surface properties and electronic band structure are comprehensively investigated. The effect of electron occupancy change between Ir4+ (t2g5 eg0) and Ir3+ (t2g6 eg0) and their energetic positions within the band gap is found to significantly influence H2 generation. Besides this, converting Ir4+ to Ir3+ enhanced the photocathodic current and lowered the onset potential. Results aid in designing photocatalysts to efficiently use low-energy photons for enhancing solar H2 production in these emerging BTO-based photocatalysts. Collectively, the observations made in this work highlight the promising application of Ir3+:BTO in z-scheme photocatalysis.

Carbon-Extraction-Induced Biaxial Strain Tuning of Carbon-Intercalated Iridium Metallene for Hydrogen Evolution Catalysis

Metallene materials with atomic thicknesses are receiving increasing attention in electrocatalysis due to ultrahigh surface areas and distinctive surface strain. However, the continuous strain regulation of metallene remains a grand challenge. Herein, taking advantage of autocatalytic reduction of Cu2+ on biaxially strained, carbon-intercalated Ir metallene, we achieve control over the carbon extraction kinetics, enabling fine regulation of carbon intercalation concentration and continuous tuning of (111) in-plane (-2.0%-2.6%) and interplanar (3.5%-8.8%) strains over unprecedentedly wide ranges. Electrocatalysis measurements reveal the strain-dependent activity toward hydrogen evolution reaction (HER), where weakly strained Ir metallene (w-Ir metallene) with the smallest lattice constant presents the highest mass activity of 2.89 A mg-1Ir at -0.02 V vs reversible hydrogen electrode (RHE). Theoretical calculations validated the pivotal role of lattice compression in optimizing H binding on carbon-intercalated Ir metallene surfaces by downshifting the d-band center, further highlighting the significance of strain engineering for boosted electrocatalysis.

Polarization Conforms Performance Variability in Amorphous Electrodeposited Iridium Oxide pH Sensors: A Thorough Surface Chemistry Investigation

Electrodeposited amorphous hydrated iridium oxide (IrOx) is a promising material for pH sensing due to its high sensitivity and the ease of fabrication. However, durability and variability continue to restrict the sensor's effectiveness. Variation in probe films can be seen in both performance and fabrication, but it has been found that performance variation can be controlled with potentiostatic conditioning (PC). To make proper use of this technique, the morphological and chemical changes affecting the conditioning process must be understood. Here, a thorough study of this material, after undergoing PC in a pH-sensing-relevant potential regime, was conducted by voltammetry, scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). Fitting of XPS data was performed, guided by raw trends in survey scans, core orbitals, and valence spectra, both XPS and UPS. The findings indicate that the PC process can repeatably control and conform performance and surface bonding to desired calibrations and distributions, respectively; PC was able to reduce sensitivity and offset ranges to as low as ±0.7 mV/pH and ±0.008 V, respectively, and repeat bonding distributions over ~2 months of sample preparation. Both Ir/O atomic ratios (shifting from 4:1 to over 4.5:1) and fitted components assigned hydroxide or oxide states based on the literature (low-voltage spectra being almost entirely with suggested hydroxide components, and high-voltage spectra almost entirely with suggested oxide components) trend across the polarization range. Self-consistent valence, core orbital, and survey quantitative trends point to a likely mechanism of ligand conversion from hydroxide to oxide, suggesting that the conditioning process enforces specific state mixtures that include both theoretical Ir(III) and Ir(IV) species, and raising the conditioning potential alters the surface species from an assumed mixture of Ir species to more oxidized Ir species.

Single Atom Iridium Decorated Nickel Alloys Supported on Segregated MoO2 for Alkaline Water Electrolysis

Hetero-interface engineering has been widely employed to develop supported multicomponent catalysts for water electrolysis, but it still remains a substantial challenge for supported single atom alloys. Herein a conductive oxide MoO2 supported Ir1 Ni single atom alloys (Ir1 Ni@MoO2 SAAs) bifunctional electrocatalysts through surface segregation coupled with galvanic replacement reaction, where the Ir atoms are atomically anchored onto the surface of Ni nanoclusters via the Ir-Ni coordination accompanied with electron transfer from Ni to Ir is reported. Benefiting from the unique structure, the Ir1 Ni@MoO2 SAAs not only exhibit low overpotential of 48.6 mV at 10 mA cm-2 and Tafel slope of 19 mV dec-1 for hydrogen evolution reaction, but also show highly efficient alkaline water oxidation with overpotential of 280 mV at 10 mA cm-2 . Their overall water electrolysis exhibits a low cell voltage of 1.52 V at 10 mA cm-2 and excellent durability. Experiments and theoretical calculations reveal that the Ir-Ni interface effectively weakens hydrogen binding energy, and decoration of the Ir single atoms boost surface reconstruction of Ni species to enhance the coverage of intermediates (OH*) and switch the potential-determining step. It is suggested that this approach opens up a promising avenue to design efficient and durable precious metal bifunctional electrocatalysts.

XPS and HR TEM Elucidation of the Diversity of Titania-Supported Single-Site Ir Catalyst Performance in Spin-Selective Propene Hydrogenation

Immobilized [Ir(COD)Cl]2-Linker/TiO2 catalysts with linkers containing Py, P(Ph)2 and N(CH3)2 functional groups were prepared. The catalysts were tested via propene hydrogenation with parahydrogen in a temperature range from 40 °C to 120 °C which was monitored via NMR. The catalytic behavior of [Ir(COD)Cl]2-Linker/TiO2 is explained on the basis of quantitative and qualitative XPS data analysis performed for the catalysts before and after the reaction at 120 °C. It is shown that the temperature dependence of propene conversion and the enhancement of the NMR signal are explained via a combination of the stabilities of both the linker and immobilized [Ir(COD)Cl]2 complex. It is demonstrated that the N(CH3)2-linker is the most stable at the surface of TiO2 under used reaction conditions. As a result, only this sample shows a rise in the enhancement of the NMR signal in the 100-120 °C temperature range.

Efficient and sustainable water electrolysis achieved by excess electron reservoir enabling charge replenishment to catalysts

Suppressing the oxidation of active-Ir(III) in IrOx catalysts is highly desirable to realize an efficient and durable oxygen evolution reaction in water electrolysis. Although charge replenishment from supports can be effective in preventing the oxidation of IrOx catalysts, most supports have inherently limited charge transfer capability. Here, we demonstrate that an excess electron reservoir, which is a charged oxygen species, incorporated in antimony-doped tin oxide supports can effectively control the Ir oxidation states by boosting the charge donations to IrOx catalysts. Both computational and experimental analyses reveal that the promoted charge transfer driven by excess electron reservoir is the key parameter for stabilizing the active-Ir(III) in IrOx catalysts. When used in a polymer electrolyte membrane water electrolyzer, Ir catalyst on excess electron reservoir incorporated support exhibited 75 times higher mass activity than commercial nanoparticle-based catalysts and outstanding long-term stability for 250 h with a marginal degradation under a water-splitting current of 1 A cm-2. Moreover, Ir-specific power (74.8 kW g-1) indicates its remarkable potential for realizing gigawatt-scale H2 production for the first time.

Engineering metal oxidation using epitaxial strain

The oxides of platinum group metals are promising for future electronics and spintronics due to the delicate interplay of spin-orbit coupling and electron correlation energies. However, their synthesis as thin films remains challenging due to their low vapour pressures and low oxidation potentials. Here we show how epitaxial strain can be used as a control knob to enhance metal oxidation. Using Ir as an example, we demonstrate the use of epitaxial strain in engineering its oxidation chemistry, enabling phase-pure Ir or IrO2 films despite using identical growth conditions. The observations are explained using a density-functional-theory-based modified formation enthalpy framework, which highlights the important role of metal-substrate epitaxial strain in governing the oxide formation enthalpy. We also validate the generality of this principle by demonstrating epitaxial strain effect on Ru oxidation. The IrO2 films studied in our work further revealed quantum oscillations, attesting to the excellent film quality. The epitaxial strain approach we present could enable growth of oxide films of hard-to-oxidize elements using strain engineering.

Highly Active Single-Atom Nanozymes with High-Loading Iridium for Sensitive Detection of Pesticides

Single-atom nanozymes (SAzymes) are novel mimic-enzyme materials with atomically doped active sites. They play a pivotal role in the field of nanozymes because of their excellent catalytic activities, high utilization efficiency of the metal atoms, and simple model of active sites. Herein, the peroxidase (POD)-like SAzymes with high-loading iridium (Ir) (5.31%) on graphene oxide (GO) nanosheets [Ir(III)/GO] were prepared through a coordination reaction between the Ir(III) complex and the oxygen-containing groups in GO. The preparation strategy avoids nitrogen doping and pyrolysis procedures which are the usually used strategies to improve the GO-based enzyme mimic activity. Ascribed to the highly active Ir atoms, Ir(III)/GO SAzymes demonstrate outstanding POD-like activity without the oxidase-like activity. In advantage of the excellent POD-like activity, a simple and sensitive colorimetric pesticide detection platform is established. The developed sensing platform offers an excellent "switch-on" pirimicarb (PIB) detection in the linear range of 10-300 nM with a limit of detection (LOD) of 2.81 nM. Moreover, the detection platform was fabricated into a portable test kit, which is composed of a test swab and sample processing tube. In the aid of a color-reading APP, the test kit can detect PIB with the LOD of 3.31 nM. It is astonishing to get this excellent detection sensitivity just using the simple colorimetric strategy. This work not only provides a novel strategy to synthesize Ir-based SAzymes but also exhibits the super capability of Ir(III)/GO in the biosensing field.

Precise Strain Tuning Boosts Electrocatalytic Hydrogen Generation

Strain engineering has been utilized as an effective approach to regulate the binding of reaction intermediates and modify catalytic behavior on noble metal nanocatalysts. However, the continuous, precise control of strain for a depiction of strain-activity correlation remains a challenge. Herein, Pd-based nanooctahedrons coated with two Ir overlayers are constructed, and subject to different postsynthetic treatments to alter the amount of H intercalated into Pd core for achieving three different surface strains (o-Pd/Ir-1.2%, o-Pd/Ir-1.7%, and o-Pd/Ir-2.1% NPs). It is demonstrated that the catalytic performances of o-Pd/Ir NPs display a volcano-shaped curve against strains toward the hydrogen evolution reaction (HER). Specifically, o-Pd/Ir-1.7% NPs exhibit superior catalytic performance with a mass activity of 9.38 A mgIr -1 at -0.02 V versus reversible hydrogen electrode, 10.8- and 18.8-fold higher than those of commercial Pt/C and Ir/C, respectively, making it one of the most active HER electrocatalysts reported to date. Density function theory calculations verify that the moderate tensile strain on Ir(111) surfaces plays a pivotal role in optimizing the H binding energy. This work highlights a new strategy for precise control over the surface strain of nanocrystals for more efficient electrocatalysis.

Reconstructed Ir‒O‒Mo species with strong Brønsted acidity for acidic water oxidation

Surface reconstruction generates real active species in electrochemical conditions; rational regulating reconstruction in a targeted manner is the key for constructing highly active catalyst. Herein, we use the high-valence Mo modulated orthorhombic Pr₃Ir_1-xMo_xO₇ as model to activate lattice oxygen and cations, achieving directional and accelerated surface reconstruction to produce self-terminated Ir‒O_bri‒Mo (O_bri represents the bridge oxygen) active species that is highly active for acidic water oxidation. The doped Mo not only contributes to accelerated surface reconstruction due to optimized Ir‒O covalency and more prone dissolution of Pr, but also affords the improved durability resulted from Mo-buffered charge compensation, thereby preventing fierce Ir dissolution and excessive lattice oxygen loss. As such, Ir‒O_bri‒Mo species could be directionally generated, in which the strong Brønsted acidity of O_bri induced by remaining Mo assists with the facilitated deprotonation of oxo intermediates, following bridging-oxygen-assisted deprotonation pathway. Consequently, the optimal catalyst exhibits the best activity with an overpotential of 259 mV to reach 10 mA cm_geo^-2, 50 mV lower than undoped counterpart, and shows improved stability for over 200 h. This work provides a strategy of directional surface reconstruction to constructing strong Brønsted acid sites in IrO_x species, demonstrating the perspective of targeted electrocatalyst fabrication under in situ realistic reaction conditions.

Ultralow-iridium content NiIr alloy derivative nanochain arrays as bifunctional electrocatalysts for overall water splitting

The development of low-cost and high-durability bifunctional electrocatalysts is of considerable importance for overall water splitting (OWS). This work reports the controlled synthesis of nickel-iridium alloy derivative nanochain array electrodes (NiIr_x NCs) with fully exposed active sites that facilitated mass transfer for efficient OWS. The nanochains have a self-supported three-dimensional core-shell structure, composed of a metallic NiIr_x core and a thin (5-10 nm) amorphous (hydr)oxide film as the shell (e.g., IrO₂/NiIr_x and Ni(OH)₂/NiIr_x). Interestingly, NiIr_x NCs have bifunctional properties. Particularly, the oxygen evolution reaction (OER) current density (electrode geometrical area) of NiIr₁ NCs is four times higher than that of IrO₂ at 1.6 V vs. RHE. Meanwhile, its hydrogen evolution reaction (HER) overpotential at 10 mA cm^-2 (η₁₀ = 63 mV) is comparable to that of 10 wt% Pt/C. These performances may originate from the interfacial effect between the surface (hydr)oxide shell and metallic NiIr_x core, which facilitates the charge transfer, along with the synergistic effect between Ni²⁺ and Ir⁴⁺ in the (hydr)oxide shell. Furthermore, NiIr₁ NCs exhibits excellent OER durability (100 h @ 200 mA cm^-2) and OWS durability (100 h @ 500 mA cm^-2) with the nanochain array structure well preserved. This work provides a promising route for developing effective bifunctional electrocatalysts for OWS applications.

Atomically Thin Metal-Dielectric Heterostructures by Atomic Layer Deposition

Heterostructures increasingly attracted attention over the past several years to enable various optoelectronic and photonic applications. In this work, atomically thin interfaces of Ir/Al₂O₃ heterostructures compatible with micro-optoelectronic technologies are reported. Their structural and optical properties were determined by spectroscopic and microscopic techniques (XRR, XPS, HRTEM, spectroscopic ellipsometry, and UV/vis/NIR spectrophotometry). The XRR and HRTEM analyses reveal a layer-by-layer growth mechanism of Ir in atomic scale heterostructures, which is different from the typical island-type growth of metals on dielectrics. Alongside, XPS investigations imply the formation of Ir-O-Al bonding at the interfaces for lower Ir concentrations, in contrast to the nanoparticle core-shell structure formation. Precisely tuning the ratio of the constituents ensures the control of the dispersion profile along with a transition from effective dielectric to metallic heterostructures. The Ir coating thickness was varied ranging from a few angstroms to films of about 7 nm in the heterostructures. The transition has been observed in the structures containing individual Ir coating thicknesses of about 2-4 nm. Following this, we show epsilon-near-zero metamaterials with tunable dielectric constants by precisely varying the composition of such heterostructures. Overall, a comprehensive study on structural and optical properties of the metal-dielectric interfaces of Ir/Al₂O₃ heterostructures was addressed, indicating an extension of the material portfolio available for novel optical functionalities.

Enhancing the repeatability and sensitivity of low-cost PCB, pH-sensitive field-effect transistors

Discrete, extended gate pH-sensitive field-effect transistors (dEGFETs) fabricated on printed circuit boards (PCBs) are a low-cost, simple to manufacture analytical technology that can be applied to a wide range of applications. Electrodeposited iridium oxide (IrOx) films have emerged as promising pH-sensitive layers owing to their theoretically high pH sensitivity and facile deposition, but typically exhibit low pH sensitivity or lack reproducibility. Moreover, to date, a combined IrOx and dEGFET PCB system has not yet been realised. In this study, we demonstrate a dEGFET pH sensor based on an extended gate manufactured on PCB that is rendered pH sensitive through an electrodeposited IrOx film, which can reliably and repeatably display beyond-Nernstian pH response. Using a combination of complementary surface analysis techniques, we show that the high pH sensitivity and repeatability of the dEGFETs are dependent on both the chemical composition and critically the uniformity of the IrOx film. The IrOx film uniformity can be enhanced through electrochemical polishing of the extended gate electrode prior to electrodeposition, leading to dEGFETs that exhibit a median pH sensitivity of 70.7 ± 5 mV/pH (n = 56) compared to only 31.3 ± 14 mV/pH (n = 31) for IrOx electrodeposited on non-polished PCB electrodes. Finally, we demonstrate the applicability of these devices by demonstrating the detection and quantification of ampicillin due to β-Lactamase enzyme activity, thus laying the foundation for cheap and ubiquitous sensors which can be applied to a range of global challenges across healthcare and environmental monitoring.

Operando CO Infrared Spectroscopy and On-Line Mass Spectrometry for Studying the Active Phase of IrO2 in the Catalytic CO Oxidation Reaction

We combine operando diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) with on-line mass spectrometry (MS) to study the correlation between the oxidation state of titania-supported IrO2 catalysts (IrO2@TiO2) and their catalytic activity in the prototypical CO oxidation reaction. Here, the stretching vibration of adsorbed COad serves as the probe. DRIFTS provides information on both surface and gas phase species. Partially reduced IrO2 is shown to be significantly more active than its fully oxidized counterpart, with onset and full conversion temperatures being about 50 °C lower for reduced IrO2. By operando DRIFTS, this increase in activity is traced to a partially reduced state of the catalysts, as evidenced by a broad IR band of adsorbed CO reaching from 2080 to 1800 cm−1.

Overall Water Splitting by a SrTaO2N-Based Photocatalyst Decorated with an Ir-Promoted Ru-Based Cocatalyst

The development of narrow-bandgap photocatalysts for one-step-excitation overall water splitting (OWS) remains a critical challenge in the field of solar hydrogen production. SrTaO2N is a photocatalytic material having a band structure suitable for OWS under visible light (λ ≤ 600 nm). However, the presence of defects in the oxynitride and the lack of cocatalysts to promote simultaneous hydrogen and oxygen evolution make it challenging to realize OWS using this material. The present work demonstrates a SrTaO2N-based particulate photocatalyst for OWS. This photocatalyst, which was composed of single crystals, was obtained by nitriding SrCl2 and Ta2O5 together with NaOH, with the latter added to control the formation of defects. The subsequent loading of bimetallic RuIrOx nanoparticles accelerated charge separation and allowed the SrTaO2N photocatalyst to exhibit superior OWS activity. This research presenting the strategies of controlling the oxygen sources and promoting the cocatalyst function is expected to expand the range of potential OWS-active oxynitride photocatalysts and permit the design of efficient cocatalysts for photocatalytic OWS.

Construction of steady-active self-supported porous Ir-based electrocatalysts for the oxygen evolution reaction

Developing highly active and stable oxygen evolution reaction (OER) catalysts for water electrolysis remains a great challenge. A self-supported Ir nanocatalyst was prepared via a self-assembly method. Its porous structure and residual metal incorporation contributed to its high activity and stability for the OER in acid.

General Synergistic Hybrid Catalyst Synthesis Method Using a Natural Enzyme Scaffold-Confined Metal Nanocluster

Due to differences in the chemical properties or optimal reaction conditions of the catalysts, the challenge in the design of bio-chemical hybrid catalysts is that the bio-catalysts or chemical catalysts usually cannot maintain the initial catalytic performance. Herein, we report a general bio-chemical hybrid catalyst synthesis method using a natural enzyme scaffold-confined metal nanocluster. A redox-active enzyme is a nanoreactor that allows access to and reduces metal ions into metal nanoclusters in situ, resulting in the enzyme-confined metal nanocluster hybrid catalyst with a synergistic effect to boost catalytic performance. Specifically, bilirubin oxidase-Ir nanoclusters (BOD-Ir NCs) with catalytic properties for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) are designed. The BOD-Ir NCs exhibit an approximately 2-fold ORR activity compared with pure BOD and a 4-fold OER activity compared with pure Ir NCs. BOD-Ir NCs exhibit stability for over 50,000 s, exceeding that of pure Ir NCs (22,000 s). The synergistic catalytic performance is attributed to the following: the mild preparation condition and matched sizes of BOD and the Ir NCs maintain the natural activity of BOD; the highly conductive Ir NCs improve the ORR activity of BOD; and the confining effect of BOD, which improves the stability and activity of the Ir NCs during the OER. In particular, BOD-Ir NCs exhibit a high half-wave potential of 0.97 V for the ORR and a low overpotential of 319 mV at 10 mA cm^-2 for the OER, surpassing most of reported catalysts under neutral conditions. Furthermore, laccase-Ir NCs and glucose oxidase-Pd NCs with synergistic catalytic performances are fabricated, proving the universality of this synthetic method. This facile strategy for designing synergistic hybrid catalysts is expected to be applied to more complex chemical transformations.

High-Performance Iridium Thin Films for Water Splitting by CVD Using New Ir(I) Precursors

Thin films of iridium can be utilized in a wide range of applications and are particularly interesting for catalytic transformations. For the scalable deposition of functional Ir thin films, metalorganic chemical vapor deposition (MOCVD) is the method of choice, for which organometallic precursors that embody a high volatility and thermal stability need to be specifically tailored. Herein, we report the synthesis, analysis, and evaluation of new volatile Ir(I)-1,5-cyclooctadiene complexes bearing all-nitrogen coordinating guanidinate (N,N'-diisopropyl-2-dimethylamido-guanidinate (DPDMG)), amidinate (N,N'-diisopropyl-amidinate (DPAMD)), and formamidinate (N,N'-diisopropyl-formamidinate (DPfAMD)) ligands. The amidinate-based Ir complex [Ir(COD)(DPAMD)] together with O₂ was implemented in MOCVD experiments resulting in highly crystalline, dense, and conductive Ir films on a variety of substrate materials. The Ir deposits achieved outstanding electrochemical performance with overpotentials in the range of 50 mV at -10 mA·cm^-2 for catalytic hydrogen evolution reaction (HER) in acidic solution. The ability to deposit Ir layers via MOCVD exhibiting promising functional properties is a significant step toward large-scale applications.

Spark Ablation for the Fabrication of PEM Water Electrolysis Catalyst-Coated Membranes

Proton-exchange-membrane (PEM) electrolyzers represent a promising technology for sustainable hydrogen production, owing to their efficiency and load flexibility. However, the acidic nature of PEM demands the use of platinum-group metal-electrocatalysts. Apart from the associated high capital costs, the scarcity of Ir hinders the large-scale implementation of the technology. Since low-cost replacements for Ir are not available at present, there is an urgent need to engineer catalyst-coated membranes (CCMs) with homogeneous catalyst layers at low Ir loadings. Efforts to realize this mainly rely on the development of advanced Ir nanostructures with maximized dispersion via wet chemistry routes. This study demonstrates the potential of an alternative vapor-based process, based on spark ablation and impaction, to fabricate efficient and durable Ir- and Pt-coated membranes. Our results indicate that spark-ablation CCMs can reduce the Ir demand by up to five times compared to commercial CCMs, without a compromise in activity. The durability of spark-ablation CCMs has been investigated by applying constant and dynamic load profiles for 150 h, indicating different degradation mechanisms for each case without major pitfalls. At constant load, an initial degradation in performance was observed during the first 30 h, but a stable degradation rate of 0.05 mV h−1 was sustained during the rest of the test. The present results, together with manufacturing aspects related to simplicity, costs and environmental footprint, suggest the high potential of spark ablation having practical applications in CCM manufacturing.

Operando Direct Observation of Stable Water-Oxidation Intermediates on Ca2-xIrO4 Nanocrystals for Efficient Acidic Oxygen Evolution

We report Ca_2-xIrO₄ nanocrystals exhibit record stability of 300 h continuous operation and high iridium mass activity (248 A g_Ir^-1 at 1.5 V_RHE) that is about 62 times that of benchmark IrO₂. Lattice-resolution images and surface-sensitive spectroscopies demonstrate the Ir-rich surface layer (evolved from one-dimensional connected edge-sharing [IrO₆] octahedrons) with high relative content of Ir⁵⁺ sites, which is responsible for the high activity and long-term stability. Combining operando infrared spectroscopy with X-ray absorption spectroscopy, we report the first direct observation of key intermediates absorbing at 946 cm^-1 (Ir⁶⁺═O site) and absorbing at 870 cm^-1 (Ir⁶⁺OO- site) on iridium-based oxides electrocatalysts, and further discover the Ir⁶⁺═O and Ir⁶⁺OO- intermediates are stable even just from 1.3 V_RHE. Density functional theory calculations indicate the catalytic activity of Ca₂IrO₄ is enhanced remarkably after surface Ca leaching, and suggest IrOO- and Ir═O intermediates can be stabilized on positive charged active sites of Ir-rich surface layer.

MnO2-Ir Nanowires: Combining Ultrasmall Nanoparticle Sizes, O-Vacancies, and Low Noble-Metal Loading with Improved Activities towards the Oxygen Reduction Reaction

Although clean energy generation utilizing the Oxygen Reduction Reaction (ORR) can be considered a promising strategy, this approach remains challenging by the dependence on high loadings of noble metals, mainly Platinum (Pt). Therefore, efforts have been directed to develop new and efficient electrocatalysts that could decrease the Pt content (e.g., by nanotechnology tools or alloying) or replace them completely in these systems. The present investigation shows that high catalytic activity can be reached towards the ORR by employing 1.8 ± 0.7 nm Ir nanoparticles (NPs) deposited onto MnO₂ nanowires surface under low Ir loadings (1.2 wt.%). Interestingly, we observed that the MnO₂-Ir nanohybrid presented high catalytic activity for the ORR close to commercial Pt/C (20.0 wt.% of Pt), indicating that it could obtain efficient performance using a simple synthetic procedure. The MnO₂-Ir electrocatalyst also showed improved stability relative to commercial Pt/C, in which only a slight activity loss was observed after 50 reaction cycles. Considering our findings, the superior performance delivered by the MnO₂-Ir nanohybrid may be related to (i) the significant concentration of reduced Mn³⁺ species, leading to increased concentration of oxygen vacancies at its surface; (ii) the presence of strong metal-support interactions (SMSI), in which the electronic effect between MnO_x and Ir may enhance the ORR process; and (iii) the unique structure comprised by Ir ultrasmall sizes at the nanowire surface that enable the exposure of high energy surface/facets, high surface-to-volume ratios, and their uniform dispersion.

X-ray photoemission and absorption study of the pyrochlore iridates (Eu1-xBix)2Ir2O7, 0 ⩽x ⩽ 1

The pyrochlore iridates (Eu1-xBi_x)₂Ir₂O₇(0⩽x⩽1) undergo an anomalous negative lattice expansion for small Bi-doping (x⩽0.035) (region I) and a normal lattice expansion forx⩾0.1(region II); this is accompanied by a transition from an insulating (and magnetically ordered) to a metallic (and with no magnetic ordering) ground state. Here, we investigate (Eu1-xBi_x)₂Ir₂O₇(0⩽x⩽1) using hard x-ray photoemission spectroscopy and x-ray absorption fine structure (XAFS) spectroscopy. By analyzing the Eu-L₃, Ir-L₃and Bi-L₂&L₃edges x-ray absorption near edge structure spectra and Eu-3dcore-level XPS spectra, we show that the metal cations retain their nominal valence, namely, Ir⁴⁺, Bi³⁺and Eu³⁺, respectively, throughout the series. The Ir-4fand Bi-4fcore-level XPS spectra consist of screened and unscreened doublets. The unscreened component is dominant In the insulating range (x⩽0.035), and in the metallic region (x⩾0.1), the screened component dominates the spectra. The Eu-3dcore-level spectra remain invariant under Bi doping. The extended XAFS data show that the coordination around the Ir remains well preserved throughout the series. The evolution of the valence band spectra near the Fermi energy with increasing Bi doping indicates the presence of strong Ir(5d)-Bi(6p) hybridization which drives the metal-to-insulator transition.

Electronic Effects of Support Doping on Hydrotalcite-Supported Iridium N-Heterocyclic Carbene Complexes

The electronic effects of supports on immobilized organometallic complexes impact their activity and lifetime, yet remain poorly understood. Here we describe a systematic study of the support effects experienced by an organometallic complex immobilized on doped hydrotalcite-like materials. To that end, we describe the synthesis and characterization of the first organometallic species immobilized on a palette of doped hydrotalcites via sulfonate linkers. The organometallic species consists of iridium N-heterocyclic carbene (NHC) carbonyl complex ([Na][Ir-(NHC-Ph-SO₃)₂(CO)₂]), a highly active molecular catalyst for transfer hydrogenation of glycerol. The hydrotalcite supports are composed of Al, Mg, and a compatible transition-metal dopant (Fe, Cu, Ni, Zn). The materials were characterized extensively by STEM, XPS, TGA, PXRD, FT-IR, N₂ desorption, ICP-AES, TPD, and microcalorimetry to probe the morphology and electronic properties of the support and elucidate structure-property relationships.

Enabling alcohol as a hydrogen carrier using metal-organic framework-stabilized Ir-Sc bifunctional catalytic sites

Alcohols are attractive portable chemical carriers of hydrogen thanks to their reversible dehydrogenation, but the hydrogen release reaction is thermodynamically unfavorable. Coupling the alcohol dehydrogenation to acetal formation can shift the reaction thermodynamics for hydrogen production. Here, we stabilized Ir³⁺ and Sc³⁺ in a metal-organic framework (MOF) for tandem catalysis. The Ir³⁺ center bearing an α-hydroxybipyridine ligand catalyzes alcohol dehydrogenation, and the Sc³⁺ Lewis acid site catalyzes acetal formation that allows further dehydrogenation to form esters. The bifunctional UiO-bpyOH-IrCp-Sc catalyst effectively converts ethylene glycol to ester and H₂ without producing CO.

Visible light-driven efficient palladium catalyst turnover in oxidative transformations within confined frameworks

Palladium catalyst turnover by reoxidation of a low-valent Pd species dominates the proceeding of an efficient oxidative transformation, but the state-of-the-art catalysis approaches still have great challenges from the perspectives of high efficiency, atom-economy and environmental-friendliness. Herein, we report a new strategy for addressing Pd reoxidation problem by the fabrication of spatially proximate Ir^III photocatalyst and Pd^II catalyst into metal-organic framework (MOF), affording MOFs based Pd/photoredox catalysts UiO-67-Ir-PdX₂ (X = OAc, TFA), which are systematically evaluated using three representative Pd-catalyzed oxidation reactions. Owing to the stabilization of single-site Pd and Ir catalysts by MOFs framework as well as the proximity of them favoring fast electron transfer, UiO-67-Ir-PdX₂, under visible light, exhibits up to 25 times of Pd catalyst turnover number than the existing catalysis systems. Mechanism investigations theoretically corroborate the capability of MOFs based Pd/photoredox catalysis to regulate the competitive processes of Pd⁰ aggregation and reoxidation in Pd-catalyzed oxidation reactions.

Noble metal alloy thin films by atomic layer deposition and rapid Joule heating

Metal alloys are usually fabricated by melting constituent metals together or sintering metal alloy particles made by high energy ball milling (mechanical alloying). All these methods only allow for bulk alloys to be formed. This manuscript details a new method of fabricating Rhodium–Iridium (Rh–Ir) metal alloy films using atomic layer deposition (ALD) and rapid Joule heating induced alloying that gives functional thin film alloys, enabling conformal thin films with high aspect ratios on 3D nanostructured substrate. In this work, ALD was used to deposit Rh thin film on an Al₂O₃ substrate, followed by an Ir overlayer on top of the Rh film. The multilayered structure was then alloyed/sintered using rapid Joule heating. We can precisely control the thickness of the resultant alloy films down to the atomic scale. The Rh–Ir alloy thin films were characterized using scanning and transmission electron microscopy (SEM/TEM) and energy dispersive spectroscopy (EDS) to study their microstructural characteristics which showed the morphology difference before and after rapid Joule heating and confirmed the interdiffusion between Rh and Ir during rapid Joule heating. The diffraction peak shift was observed by Grazing-incidence X-ray diffraction (GIXRD) indicating the formation of Rh–Ir thin film alloys after rapid Joule heating. X-ray photoelectron spectroscopy (XPS) was also carried out and implied the formation of Rh–Ir alloy. Molecular dynamics simulation experiments of Rh–Ir alloys using Large-Scale Atomic/Molecular Massively Parallel Simulator (LAMMPS) were performed to elucidate the alloying mechanism during the rapid heating process, corroborating the experimental results.

Reductive Modification of Carbon Nitride Structure by Metals-The Influence on Structure and Photocatalytic Hydrogen Evolution

Pt, Ru, and Ir were introduced onto the surface of graphitic carbon nitride (g-C₃N₄) using the wet impregnation method. A reduction of these photocatalysts with hydrogen causes several changes, such as a significant increase in the specific surface area, a C/N atomic ratio, a number of defects in the crystalline structure of g-C₃N₄, and the contribution of nitrogen bound to the amino and imino groups. According to the X-ray photoelectron spectroscopy results, a transition layer is formed at the g-C₃N₄/metal nanoparticle interphase, which contains metal at a positive degree of oxidation bonded to nitrogen. These structural changes significantly enhanced the photocatalytic activity in the production of hydrogen through the water-splitting reaction. The activity of the platinum photocatalyst was 24 times greater than that of pristine g-C₃N₄. Moreover, the enhanced activity was attributed to significantly better separation of photogenerated electron-hole pairs on metal nanoparticles and structural distortions of g-C₃N₄.

Mn-Dopant Differentiating the Ru and Ir Oxidation States in Catalytic Oxides Toward Durable Oxygen Evolution Reaction in Acidic Electrolyte

Designing an efficient and durable electrocatalyst for the sluggish oxygen evolution reaction (OER) at the anode remains the foremost challenge in developing proton exchange membrane (PEM) electrolyzers. Here, a highly active and durable cactus-like nanoparticle with an exposed heterointerface between the IrO₂ and the low oxidation state Ru by introducing a trace amount of Mn dopant is reported. The heterostructure fabrication relies on initial mixing of the Ru and Ir phases before electrochemical oxidation to produce a conjoined Ru/IrO₂ heterointerface. Benefitting from electron transfer at the heterointerface, the low oxidation state Ru species shows excellent initial activity, which is maintained even after 180 h of continuous OER test. In a half-cell test, the Mn-doped RuIr nanocactus (Mn-RuIr NCT) achieves a mass activity of 1.85 A mg_Ir+Ru ^-1 at 1.48 V_RHE , which is 139-fold higher than that of commercial IrO₂ . Moreover, the superior electrocatalytic performance of Mn-RuIr NCT in the PEM electrolysis system ensures its viability in practical uses. The results of the excellent catalytic performance for acidic OER indicate that the heterostructuring robust rutile IrO₂ and the highly active Ru species with a low oxidation state on the catalyst surface drive a synergistic effect.

Hydrogen Peroxide Generation and Hydrogen Oxidation Reactions of Vacuum-prepared Ru/Ir(111) Bimetallic Surfaces

From the viewpoint of the application of Ir-Ru alloys for anode of proton exchange membrane fuel cells (PEMFCs), hydrogen peroxide (H2O2) generation and the hydrogen oxidation reaction (HOR) properties of...