Orange Peel Derived Activated Carbon for Fabrication of High-Energy and High-Rate Supercapacitors

Sustainable sodium alginate hydrogels incorporating banana leaf activated carbon and organo-clay for enhanced dye removal

New sodium alginate-based hydrogels using activated carbon from banana leaves and organo-modified montmorillonite for water treatment. Activated carbon extracted successfully from banana leaves and montmorillonite clay was surface-modified using cetyltrimethylammonium bromide as a cationic surfactant. Hydrogels were then synthesized using calcium chloride as the cross-linking agent. They were characterized using FTIR, X-ray diffraction, and scanning electronic microscopy. Characterization intimated the incorporation of components successfully. Adsorption performance was determined using pH, adsorbent dosages, initial dye concentration, and contact time. Sodium alginate-based hydrogels demonstrated remarkable efficacy in removing MB and EBT dyes from synthetic solutions, achieving removal efficiencies of up to 80.3% and 84.9% respectively within 90 min at pH 7. The adsorption process corresponded better to the Freundlich isotherm model. The kinetics of EBT dye removal were described by a pseudo-second-order model. Meanwhile, the kinetics of the removal of MB dyes were described by both pseudo-first order and intraparticle diffusion models. We conducted MTT assays to determine the cytotoxicity of our blends. This showed a dose-dependent drop in viability. Sodium alginate-based hydrogels made the cells least cytotoxic. The developed hydrogels can be used as safe and effective agents for water treatment, as indicated by the results.

Crafting the architecture of biomass-derived activated carbon via electrochemical insights for supercapacitors: a review

Escalating energy demands have often ignited ground-breaking innovations in the current era of electrochemical energy storage systems. Supercapacitors (SCs) have emerged as frontrunners in this regard owing to their exclusive features such ultra-high cyclic stability, power density, and ability to be derived from sustainable sources. Despite their promising attributes, they typically fail in terms of energy density, which poses a significant hindrance to their widespread commercialization. Hence, researchers have been exploring different cutting-edge technologies to address these challenges. This review focuses on biomass-derived activated carbon (BDAC) as a promising material for SCs. Initially, the methodology and key factors involved in synthesising BDAC, including crafting the building blocks of SCs, is detailed. Further, various conventional and novel material characterization techniques are examined, highlighting important insights from different biomass sources. This comprehensive investigation seeks to deepen our understanding of the properties of materials and their significance in various applications. Next, the architectural concepts of SCs, including their construction and energy storage mechanisms, are highlighted. Finally, the translation of the unravelled BDAC metrics into promising SCs is reviewed with comprehensive device-level visualisations and quantifications of the electrochemical performance of SCs using various techniques, including cyclic voltammetry (CV), galvanostatic charge-discharge test (GCD), electrochemical impedance spectroscopy (EIS), cyclic tests (CT), voltage holding tests (VHT) and self-discharge tests (SDT). The review is concluded with a discussion that overviews peanut-shell-derived activated carbon as it is a common and promising source in our geographical setting. Overall, the review explores the current and futuristic pivotal roles of BDAC in the broad field of energy storage, especially in SC construction and commercialisation.

Cupric ion coordination-mediated molecularly imprinted electrochemical sensor for the recognition and ratiometric detection of lidocaine

Molecularly imprinted polymers (MIPs) have been widely used as artificial recognition elements in sensing applications. However, their electrochemical sensing performance is generally hampered by limited affinity and uncontrolled condition change. In this work, a novel MIP electrochemical sensor based on metal coordination interaction was prepared and used for the recognition and ratiometric detection of lidocaine (LC). The sensor was constructed by electrodepositing Cu-coordinated MIP on biomass carbon modified glassy carbon electrode. Herein, Cu2+ ions acted as anchor for the immobilization of LC during the synthesis process, enabling the orderly formation of molecular recognition sites. Reversely, the metal coordination between Cu2+ ions and LC molecules facilitated the recognition of LC. Moreover, the doped cupric ions in the polymer film could provide a reference signal for subsequent ratiometric strategy. Thus the resulting sensor exhibited high selectivity, sensitivity, satisfactory reproducibility, and anti-interference ability. Under the selected conditions, the peak current ratio of LC and cupric ion was linear to LC concentration in the range of 0.008-2.5 μmol L-1 (R2 = 0.9951), and the limit of detection was 1.9 nmol L-1 (S/N = 3). The practical feasibility of the sensor was evaluated by detecting human serum and pharmaceutical samples, and satisfactory outcomes were obtained.

Sustainable synthesis of spongy-like porous carbon for supercapacitive energy storage systems towards pollution control

In this study, the fruit of Terminalia chebula, commonly known as chebulic myrobalan, is used as the precursor for carbon for its application in supercapacitors. The Terminalia chebula biomass-derived sponge-like porous carbon (TC-SPC) is synthesized using a facile and economical method of pyrolysis. TC-SPC thus obtained is subjected to XRD, FESEM, TEM, HRTEM, XPS, Raman spectroscopy, ATR-FTIR, and nitrogen adsorption-desorption analyses for their structural and chemical composition. The examination revealed that TC-SPC has a crystalline nature and a mesoporous and microporous structure accompanied by a disordered carbon framework that is doped with heteroatoms such as nitrogen and sulfur. Electrochemical studies are performed on TC-SPC using cyclic voltammetry, galvanostatic charge-discharge, and electrochemical impedance spectroscopy. TC-SPC contributed a maximum specific capacitance of 145 F g-1 obtained at 1 A g-1. The cyclic stability of TC-SPC is significant with 10,000 cycles, maintaining the capacitance retention value of 96%. The results demonstrated that by turning the fruit of Terminalia chebula into an opulent product, a supercapacitor, TC-SPC generated from biomass has proven to be a potential candidate for energy storage application.

Potential Development of Porous Carbon Composites Generated from the Biomass for Energy Storage Applications

Creating an innovative and environmentally friendly energy storage system is of vital importance due to the growing number of environmental problems and the fast exhaustion of fossil fuels. Energy storage using porous carbon composites generated from biomass has attracted a lot of attention in the research community. This is primarily due to the environmentally friendly nature, abundant availability in nature, accessibility, affordability, and long-term viability of macro/meso/microporous carbon sourced from a variety of biological materials. Extensive information on the design and the building of an energy storage device that uses supercapacitors was a part of this research. This study examines both porous carbon electrodes (ranging from 44 to 1050 F/g) and biomasses with a large surface area (between 215 and 3532 m2/g). Supposedly, these electrodes have a capacitive retention performance of about 99.7 percent after 1000 cycles. The energy density of symmetric supercapacitors is also considered, with values between 5.1 and 138.4 Wh/kg. In this review, we look at the basic structures of biomass and how they affect porous carbon synthesis. It also discusses the effects of different structured porous carbon materials on electrochemical performance and analyzes them. In recent developments, significant steps have been made across various fields including fuel cells, carbon capture, and the utilization of biomass-derived carbonaceous nanoparticles. Notably, our study delves into the innovative energy conversion and storage potentials inherent in these materials. This comprehensive investigation seeks to lay the foundation for forthcoming energy storage research endeavors by delineating the current advancements and anticipating potential challenges in fabricating porous carbon composites sourced from biomass.

A Strategic Synthesis of Orange Waste-Derived Porous Carbon via a Freeze-Drying Method: Morphological Characterization and Cytocompatibility Evaluation

Porous carbon materials from food waste have gained growing interest worldwide for multiple applications due to their natural abundance and the sustainability of the raw materials and the cost-effective synthetic processing. Herein, orange waste-derived porous carbon (OWPC) was developed through a freeze-drying method to prevent the demolition of the original biomass structure and then was pyrolyzed to create a large number of micro, meso and macro pores. The novelty of this work lies in the fact of using the macro-channels of the orange waste in order to create a macroporous network via the freeze-drying method which remains after the pyrolysis steps and creates space for the development of different types of porous in the micro and meso scale in a controlled way. The results showed the successful preparation of a porous carbon material with a high specific surface area of 644 m2 g-1 without any physical or chemical activation. The material's cytocompatibility was also investigated against a fibroblast cell line (NIH/3T3 cells). OWPC triggered a mild intracellular reactive oxygen species production without initiating apoptosis or severely affecting cell proliferation and survival. The combination of their physicochemical characteristics and high cytocompatibility renders them promising materials for further use in biomedical and pharmaceutical applications.

Activated Carbon Derived from Cucumber Peel for Use as a Supercapacitor Electrode Material

Biowaste conversion into activated carbon is a sustainable and inexpensive approach that relieves the pressure on its disposal. Here, we prepared micro-mesoporous activated carbons (ACs) from cucumber peels through carbonization at 600 °C followed by thermal activation at different temperatures. The ACs were tested as supercapacitors for the first time. The carbon activated at 800 °C (ACP-800) showed a high specific capacitance value of 300 F/g at a scan rate of 5 mV/s in the cyclic voltammetry and 331 F/g at the current density of 0.1 A/g in the galvanostatic charge-discharge analysis. At the current density of 1 A/g, the specific discharge capacitance was 286 F/g and retained 100% capacity after 2000 cycles. Their properties were analyzed by scanning electron microscopy, energy-dispersive X-ray analysis, porosity, thermal analysis, and Fourier-transform infrared spectroscopy. The specific surface area of this sample was calculated to be 2333 m2 g-1 using the Brunauer-Emmett-Teller method. The excellent performance of ACP-800 is mainly attributed to its hierarchical porosity, as the mesopores provide connectivity between the micropores and improve the capacitive performance. These electrochemical properties enable this carbon material prepared from cucumber peels to be a potential source for supercapacitor materials.

Synthesis and characterization of magnesium ferrite-activated carbon composites derived from orange peels for enhanced supercapacitor performance

Supercapacitors have emerged as highly efficient energy storage devices, relying on electrochemical processes. The performance of these devices can be influenced by several factors, with key considerations including the selection of electrode materials and the type of electrolyte utilized. Transition metal oxide electrodes are commonly used in supercapacitors, as they greatly influence the electrochemical performance of these devices. Nonetheless, ferrites' low energy density poses a limitation. Hence, it is crucial to create electrode materials featuring unique and distinct structures, while also exploring the ideal electrolyte types, to enhance the electrochemical performance of supercapacitors incorporating magnesium ferrites (MF). In this study, we effectively prepared magnesium ferrites (MgFe2O4) supported on activated carbon (AC) derived from orange peels (OP) using a simple hydrothermal method. The resulting blends underwent comprehensive characterization employing various methods, including FTIR, XRD, TEM, SEM, EDX, and mapping analysis. Moreover, the electrochemical performance of MgFe2O4@AC composites was evaluated using GCD and CV techniques. Remarkably, the MF45-AC electrode material showed exceptional electrochemical behavior, demonstrating a specific capacitance of 870 F·g-1 within current density of 1.0 A g-1 and potential windows spanning from 0 to 0.5 V. Additionally, the prepared electrodes displayed exceptional cycling stability, with AC, MF, and MF45-AC retaining 89.6%, 94.2%, and 95.1% of their initial specific capacitance, respectively, even after 5000 cycles. These findings underscore the potential of MF-AC composites as superior electrode materials for supercapacitors. The development of such composites, combined with tailored electrolyte concentrations, holds significant promise for advancing the electrochemical performance and energy density of supercapacitor devices.

Protonated C3N4 Nanosheets for Enhanced Energy Storage in Symmetric Supercapacitors through Hydrochloric Acid Treatment

Next-generation electrochemical energy storage materials are essential in delivering high power for long periods of time. Double-layer carbonaceous materials provide high power density with low energy density due to surface-controlled adsorption. This limitation can be overcome by developing a low-cost, more abundant material that delivers high energy and power density. Herein, we develop layered C3N4 as a sustainable charge storage material for supercapacitor applications. It was thermally polymerized using urea and then protonated with various acids to enhance its charge storage contribution by activating more reaction sites through the exfoliation of the C-N framework. The increased electron-rich nitrogen moieties in the C-N framework material lead to better electrolytic ion impregnation into the electrode, resulting in a 7-fold increase in charge storage compared to the pristine material and other acids. It was found that C3N4 treated with hydrochloric acid showed a very high capacitance of 761 F g-1 at a current density of 20 A g-1 and maintained 100% cyclic retention over 10,000 cycles in a three-electrode configuration, outperforming both the pristine material and other acids. A symmetric device was fabricated using a KOH/LiI gel-based electrolyte, exhibiting a maximum specific capacitance of 175 F g-1 at a current density of 1 A g-1. Additionally, the device showed remarkable power and energy density, reaching 600 W kg-1 and 35 Wh kg-1, with an exceptional cyclic stability of 60% even after 5000 cycles. This study provides an archetype to understand the underlying mechanism of acid protonation and paves the way to a metal-carbon-free environment.

Graphitized mango seed as an effective 3D anode in batch and continuous mode microbial fuel cells for sustainable wastewater treatment and power generation

Herein, we explored the utilization of graphitized mango seeds as 3D-packed anodes in microbial fuel cells (MFCs) powered by sewage wastewater. Mango seeds were graphitized at different temperatures (800 °C, 900 °C, 1000 °C, and 1100 °C) and their effectiveness as anodes was evaluated. Surface morphology analysis indicated that the proposed anode was characterized by layered branches and micro-sized deep holes, facilitating enhanced biofilm formation and microorganism attachment. Maximum power densities achieved in the MFCs utilizing the mango seed-packed anodes graphitized at 1100 °C and 1000 °C were 2170.8 ± 90 and 1350.6 ± 125 mW m-2, respectively. Furthermore, the weight of the graphitized seed anode demonstrated a positive correlation with the generated power density and cell potential. Specifically, MFCs fabricated with 9 g and 6 g anodes achieved maximum power densities of 2170.8 ± 90 and 1800.5 ± 40 mW m-2, respectively. A continuous mode air cathode MFC employing the proposed graphitized mango anode prepared at 1100 °C and operated at a flow rate of 2 L h-1 generated a stable current density of approximately 12 A m-2 after 15 hours of operation, maintaining its stability for 75 hours. Furthermore, a chemical oxygen demand (COD) removal efficiency of 85% was achieved in an assembled continuous mode MFC. Considering that the proposed MFC was driven by sewage wastewater without the addition of external microorganisms, atmospheric oxygen was used as the electron acceptor through an air cathode mode, agricultural biomass waste was employed for the preparation of the anode, and a higher power density was achieved (2170.8 mW m-2) compared to reported values; it is evident that the proposed graphitized mango seed anode exhibits high efficiency for application in MFCs.

Synergistic advancements in sewage-driven microbial fuel cells: novel carbon nanotube cathodes and biomass-derived anodes for efficient renewable energy generation and wastewater treatment

Microbial fuel cells (MFCs) offer a dual solution of generating electrical energy from organic pollutants-laden wastewater while treating it. This study focuses on enhancing MFC performance through innovative electrode design. Three-dimensional (3D) anodes, created from corncobs and mango seeds via controlled graphitization, achieved remarkable power densities. The newly developed electrode configurations were evaluated within sewage wastewater-driven MFCs without the introduction of external microorganisms or prior treatment of the wastewater. At 1,000°C and 1,100°C graphitization temperatures, corncob and mango seed anodes produced 1,963 and 2,171 mW/m2, respectively, nearly 20 times higher than conventional carbon cloth and paper anodes. An advanced cathode composed of an activated carbon-carbon nanotube composite was introduced, rivaling expensive platinum-based cathodes. By optimizing the thermal treatment temperature and carbon nanotube content of the proposed cathode, comparable or superior performance to standard Pt/C commercial cathodes was achieved. Specifically, MFCs assembled with corncob anode with the proposed and standard Pt/C cathodes reached power densities of 1,963.1 and 2,178.6 mW/m2, respectively. Similarly, when utilizing graphitized mango seeds at 1,100°C, power densities of 2,171 and 2,151 mW/m2 were achieved for the new and standard cathodes, respectively. Furthermore, in continuous operation with a flow rate of 2 L/h, impressive chemical oxygen demand (COD) removal rates of 77% and 85% were achieved with corncob and mango seed anodes, respectively. This work highlights the significance of electrode design for enhancing MFC efficiency in electricity generation and wastewater treatment.

Biomass-Derived Sustainable Electrode Material for Low-Grade Heat Harvesting

The ever-increasing energy demand and global warming caused by fossil fuels push for the exploration of sustainable and eco-friendly energy sources. Waste thermal energy has been considered as one of the promising candidates for sustainable power generation as it is abundantly available everywhere in our daily lives. Recently, thermo-electrochemical cells based on the temperature-dependent redox potential have been intensely studied for efficiently harnessing low-grade waste heat. Despite considerable progress in improving thermocell performance, no attempt was made to develop electrode materials from renewable precursors. In this work, we report the synthesis of a porous carbon electrode from mandarin peel waste through carbonization and activation processes. The influence of carbonization temperature and activating agent/carbon precursor ratio on the performance of thermocell was studied to optimize the microstructure and elemental composition of electrode materials. Due to its well-developed pore structure and nitrogen doping, the mandarin peel-derived electrodes carbonized at 800 °C delivered the maximum power density. The areal power density (P) of 193.4 mW m^-2 and P/(ΔT)² of 0.236 mW m^-2 K^-2 were achieved at ΔT of 28.6 K. However, KOH-activated electrodes showed no performance enhancement regardless of activating agent/carbon precursor ratio. The electrode material developed here worked well under different temperature differences, proving its feasibility in harvesting electrical energy from various types of waste heat sources.

Carbon dots conjugated nanocomposite for the enhanced electrochemical performance of supercapacitor electrodes

Naturally, a combination of metal oxides and carbon materials enhances the electrochemical performance of supercapacitor (SC) electrodes. We report on two different materials with highly conductive carbon dots (CDs) and a Co0.5Ni0.5Fe2O4/SiO2/TiO2 nanocomposite with a high power density, a high specific surface area, and a nanoporous structure to improve power and energy density in energy storage devices. A simple and low-cost process for synthesizing the hybrid SC electrode material Co0.5Ni0.5Fe2O4/SiO2/TiO2/CDs, known as CDs-nanocomposite, was performed via a layer-by-layer method; then, the CDs-nanocomposite was loaded on a nickel foam substrate for SC electrochemical measurements. A comparative study of the surface and morphology of CDs, the Co0.5Ni0.5Fe2O4/SiO2/TiO2 nanocomposite and CDs-nanocomposite was carried out using X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDX), BET surface area, and Raman spectroscopy. The synthesized CDs-nanocomposite electrode material displayed enhanced electrochemical performance, having a high specific capacitance of 913.7 F g-1 at a scan rate of 5 mV s-1 and capacitance retention of 72.2%, as well as remarkable long-life cyclic stability over 3000 cycles in the three-electrode setup and 1 M KOH electrolyte. It also demonstrated a superior energy density of 130.7 W h kg-1. The improved electrochemical behavior of the CDs-nanocomposite for SC electrodes, together with its fast and simple synthesis method, provides a suitable point of reference. Other kinds of metal oxide nanocomposites can be synthesized for use in energy storage devices.

Physicochemical and Optical Characterization of Citrus aurantium Derived Biochar for Solar Absorber Applications

Agro-industrial waste valorization is an attractive approach that offers new alternatives to deal with shrinkage and residue problems. One of these approaches is the synthesis of advanced carbon materials. Current research has shown that citrus waste, mainly orange peel, can be a precursor for the synthesis of high-quality carbon materials for chemical adsorption and energy storage applications. A recent approach to the utilization of advanced carbon materials based on lignocellulosic biomass is their use in solar absorber coatings for solar-thermal applications. This study focused on the production of biochar from Citrus aurantium orange peel by a pyrolysis process at different temperatures. Biochars were characterized by SEM, elemental analysis, TGA-DSC, FTIR, DRX, Raman, and XPS spectroscopies. Optical properties such as diffuse reflectance in the UV−VIS−NIR region was also determined. Physical-chemical characterization revealed that the pyrolysis temperature had a negative effect in yield of biochars, whereas biochars with a higher carbon content, aromaticity, thermal stability, and structural order were produced as the temperature increased. Diffuse reflectance measurements revealed that it is possible to reduce the reflectance of the material by controlling its pyrolysis temperature, producing a material with physicochemical and optical properties that could be attractive for use as a pigment in solar absorber coatings.

Nature inspired approach to mimic design for increased specific capacitance as supercapacitor electrodes

In this study, the experiment was conducted assuming that the citrus fruits were contaminated with bacteria. Herein, orange peels (OP) and lemon peels (LP) can be used as a carbon source and have the advantage of using discarded materials and heteroatoms. Also, the nitrogen heteroatom is introduced by naturally doping the materials with bacteria (Escherichia Coli, E. coli). The as-prepared bacteria doped activated carbon showed an increase in nitrogen content and surface properties which led to an improvement in electrochemical properties. The specific capacitance of bacteria doped OP and LP was 92.4 and 139 Fg^-1 compared to the bare samples with a specific capacitance of 60.9 and 49.6 Fg^-1 at a current density of 0.2Ag^-1 and capacity retention of 129% after 10,000 cycles for the bacteria-doped samples. This process which is simple, cheap, and environmentally friendly can be applied to discarded fruit peels for the fabrication of supercapacitor materials.

Switching the solubility of electroactive ionic liquids for designing high energy supercapacitor and low potential biosensor

Ionic liquids are regarded as one of the most prodigious materials for sustainable technological developments with superior performance and versatility. Hence, in this study, we have reported the design and synthesis of electroactive disubstituted ferrocenyl ionic liquids (Fc-ILs) with two different counter anions and demonstrated the significance of their anion tuneable physicochemical characteristics towards multifunctional electrochemical applications. The Fc-IL synthesized with chloride counter anion (Fc-Cl-IL) displays water-solubility and can be used as a redox additive in the fabrication of supercapacitor. Supercapacitor device with Fc-Cl-IL based redox electrolyte exhibits outstanding energy and power densities of 91 Wh kg^-1 and 20.3 kW kg^-1, respectively. Meanwhile, ferrocenyl IL synthesized with perchlorate anion (Fc-ClO₄-IL) exhibits water-insolubility and can serve as a redox mediator towards construction of a glucose biosensor. The biosensor comprising Fc-ClO₄-IL is able to detect glucose at an exceptionally lower potential of 0.2 V, with remarkable sensitivity and selectivity. This study implies that the introduction of electroactive ILs could afford supercapacitor devices with high energy and power densities and biosensors with less detection potential.

Research on High-Value Utilization of Carbon Derived from Tobacco Waste in Supercapacitors

Large quantities of tobacco stalks residues are generated and discarded as crop waste or combusted directly every year. Thus, we need to find an appropriate way to dispose of this type of waste and recycle it. The conversion of biomass waste into electrode materials for supercapacitors is entirely in line with the concept of sustainability and green. In this paper, tobacco-stalk-based, porous activated carbon (TC) was successfully synthesized by high-temperature and high-pressure hydrothermal pre-carbonization and KOH activation. The synthesized TC had a high pore volume and a large surface area of 1875.5 m² g⁻¹, in which there were many mesopores and interconnected micro-/macropores. The electrochemical test demonstrated that TC-1 could reach a high specific capacitance of up to 356.4 F g⁻¹ at a current density of 0.5 A g⁻¹, which was carried in 6M KOH. Additionally, a symmetrical supercapacitor device was fabricated by using TC-1 as the electrode, which delivered a high energy density up to 10.4 Wh kg⁻¹ at a power density of 300 W kg⁻¹, and excellent long-term cycling stability (92.8% of the initial capacitance retention rate after 5000 cycles). Therefore, TC-1 is considered to be a promising candidate for high-performance supercapacitor electrode materials and is a good choice for converting tobacco biomass waste into a resource.

The Effect of Modifications of Activated Carbon Materials on the Capacitive Performance: Surface, Microstructure, and Wettability

In this review, the efforts done by different research groups to enhance the performance of the electric double-layer capacitors (EDLCs), regarding the effect of the modification of activated carbon structures on the electrochemical properties, are summarized. Activated carbon materials with various porous textures, surface chemistry, and microstructure have been synthesized using several different techniques by different researchers. Micro-, meso-, and macroporous textures can be obtained through the activation/carbonization process using various activating agents. The surface chemistry of activated carbon materials can be modified via: (i) the carbonization of heteroatom-enriched compounds, (ii) post-treatment of carbon materials with reactive heteroatom sources, and (iii) activated carbon combined both with metal oxide materials dan conducting polymers to obtain composites. Intending to improve the EDLCs performance, the introduction of heteroatoms into an activated carbon matrix and composited activated carbon with either metal oxide materials or conducting polymers introduced a pseudo-capacitance effect, which is an additional contribution to the dominant double-layer capacitance. Such tricks offer high capacitance due to the presence of both electrical double layer charge storage mechanism and faradic charge transfer. The surface modification by attaching suitable heteroatoms such as phosphorus species increases the cell operating voltage, thereby improving the cell performance. To establish a detailed understanding of how one can modify the activated carbon structure regarding its porous textures, the surface chemistry, the wettability, and microstructure enable to enhance the performance of the EDLCs is discussed here in detail. This review discusses the basic key parameters which are considered to evaluate the performance of EDLCs such as cell capacitance, operating voltage, equivalent series resistance, power density, and energy density, and how these are affected by the modification of the activated carbon framework.

Carbonaceous Adsorbents Derived from Agricultural Sources for the Removal of Pramipexole Pharmaceutical Model Compound from Synthetic Aqueous Solutions

The aim of the present study was to synthesize various samples of activated carbon (AC) from different agricultural sources as precursors, like orange peels, tea stalks, and kiwi peels, as well as sucrose. The synthesis of AC was achieved with chemical activation using H3PO4 and KOH. The produced AC samples were tested as adsorbents for the removal of a pharmaceutical model compound, pramipexole dihydrochloride (PRM), from synthetic aqueous synthetic solutions. The produced-from-sucrose AC presented the higher yield of synthesis (~58%). The physicochemical features of the materials were analyzed by FTIR spectroscopy, N2 physisorption, and SEM imaging. More specifically, the AC sample derived from sucrose (SG-AC) had the highest specific surface area (1977 m2/g) with the total pores volume, mesopores volume, and external surface area being 1.382 cm3/g, 0.819 cm3/g, and 751 m2/g, respectively. The effect of the initial pH and PRM concentration were studied, while the equilibrium results (isotherms) were fitted to Langmuir and Freundlich models. The maximum adsorption capacities were found to be 213, 190, 155, and 115 mg/g for AC samples produced from sucrose, kiwi peels, orange peels, and tea stalks, respectively.

Hydrothermal synthesis of cobalt telluride nanorods for a high performance hybrid asymmetric supercapacitor

Cobalt telluride nanostructured materials have demonstrated various applications, particularly in energy generation and storage. A high temperature and reducing atmosphere are required for the preparation of cobalt telluride-based materials, which makes this a difficult and expensive process. The development of a facile route for producing the desirable nanostructure of cobalt telluride remains a great challenge. We demonstrated a simple hydrothermal method for preparing cobalt telluride nanorods (CoTe NRs) and telluride nanorods (Te NRs) for supercapacitor applications. The morphology of CoTe NRs and Te NRs was analyzed using scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The prepared CoTe NR electrode material exhibited a high specific capacity of 170 C g⁻¹ at a current density of 0.5 A g⁻¹ with an exceptional cyclic stability. The asymmetric supercapacitor was assembled using CoTe NRs and orange peel-derived activated carbon (OPAA-700) as a positive and negative electrode, respectively. The fabricated device delivered a high energy density of 40.7 W h kg⁻¹ with a power density of 800 W kg⁻¹ at 1 A g⁻¹ current density. When the current density was increased to 30 A g⁻¹, the fabricated device delivered a high power density of 22.5 kW kg⁻¹ with an energy density of 16.3 W h kg⁻¹. The fabricated asymmetric supercapacitor displayed a good cyclic stability performance for 10 000 cycles at a high current density of 30 A g⁻¹ and retained 85% of its initial capacity for after 10 000 cycles. The prepared materials indicate their applicability for high performance energy storage devices.

A one-step hydrothermal derived cobalt telluride nanorods and activated carbon-based hybrid asymmetric supercapacitor delivered a high energy (40.7 W h kg⁻¹) and power density (22.5 kW kg⁻¹) with an electrochemical stability of 85% for 10000 cycles.

Waste Toner-Derived Carbon/Fe3O4 Nanocomposite for High-Performance Supercapacitor

Electronic waste management is one of the key challenges for the green revolution without affecting the environment. The wide use of printer devices has brought a horde of discarded waste toner, which release ∼6000 tons of processed carbon powder into the atmosphere every year that would essentially pollute the atmosphere. Here, we propose a one-step thermal conversion of waste toner powder into carbon/Fe₃O₄ nanocomposites for energy storage applications. Recovered toner carbon (RTC) and toner carbon calcined at 300 °C (RTC-300) were characterized using various analytical tools. From the FE-SEM analysis, the presence of carbon particles with uniformly decorated Fe₃O₄ nanoparticles was confirmed. RTC-300 carbon was used as an electrode material for supercapacitors, and it exhibited a high specific capacitance of 536 F/g at a current density of 3 A/g, which is almost six times higher than that of the commercial mesoporous graphitized carbon black. RTC-300 showed excellent electrochemical stability of 97% over 5000 cycles at a high current density of 20 A/g. The fabricated symmetric cell using RTC-300 electrode materials in an aqueous electrolyte with a cell voltage of 1.8 V delivered a high energy and high-power density of 42 W h/kg and 14.5 kW/kg, respectively. The fabricated device is stable up to 20,000 cycles at a high current density of 20 A/g with a loss of 23% capacitance.

Fabrication of 9.6 V High-performance Asymmetric Supercapacitors Stack Based on Nickel Hexacyanoferrate-derived Ni(OH)2 Nanosheets and Bio-derived Activated Carbon

Hydrated Ni(OH)₂ and activated carbon based electrodes are widely used in electrochemical applications. Here we report the fabrication of symmetric supercapacitors using Ni(OH)₂ nanosheets and activated carbon as positive and negative electrodes in aqueous electrolyte, respectively. The asymmetric supercapacitors stack connected in series exhibited a stable device voltage of 9.6 V and delivered a stored high energy and power of 30 mWh and 1632 mW, respectively. The fabricated device shows an excellent electrochemical stability and high retention of 81% initial capacitance after 100,000 charge-discharges cycling at high charging current of 500 mA. The positive electrode material Ni(OH)₂ nanosheets was prepared through chemical decomposition of nickel hexacyanoferrate complex. The XRD pattern revealed the high crystalline nature of Ni(OH)₂ with an average crystallite size of ~10 nm. The nitrogen adsorption-desorption isotherms of Ni(OH)₂ nanosheets indicate the formation of mesoporous Ni(OH)₂ nanosheets. The chemical synthesis of Ni(OH)₂ results the formation of hierarchical nanosheets that are randomly oriented which was confirmed by FE-SEM and HR-TEM analysis. The negative electrode, activated porous carbon (OPAA-700) was obtained from orange peel waste. The electrochemical properties of Ni(OH)₂ nanosheets and OPAA-700 were studied and exhibit a high specific capacity of 1126 C/g and high specific capacitance of 311 F/g at current density of 2 A/g, respectively. Ni(OH)₂ nanosheets delivered a good rate performance and remarkable capacitance retention of 96% at high current density of 32 A/g.

Design and Preparation of Biomass-Derived Carbon Materials for Supercapacitors: A Review

The synthesis and application of biomass-derived carbon in energy storage have drawn increasing research attention due to the ease of fabrication, cost-effectiveness, and sustainability of the meso/microporous carbon produced from various biological precursors, including plants, fruits, microorganisms, and animals. Compared to the artificial nanostructured carbons, such as fullerene, carbon nanotube and graphene, the biomass-derived carbons may obtain superior capacitance, rate performance and stability in supercapacitor applications ascribing to their intrinsic nanoporous and hierarchical structures. However, challenges remain in processing techniques to obtain biomass-derived carbons with high carbon yield, high energy density, and controllable graphitic microstructures, which may require a clear understanding over the chemical and elemental compositions, and the intrinsic microstructural characteristics of the biological precursors. Herein we present comprehensive analyses over the impacts of the chemical and elemental compositions of the precursors on the carbon yield of the biomass, as well as the mechanism of chemical activation on the nanoporous structure development of the biomass-derived carbons. The structure–property relationship and functional performance of various biomass-derived carbons for supercapacitor applications are also discussed in detail and compared. Finally, useful insights are also provided for the improvements of biomass-derived carbons in supercapacitor applications.