Metal Ion-Induced Self-Assembly of a Multi-Responsive Block Copolypeptide into Well-Defined Nanocapsules

Preparation of polypeptide-metal complexes-coated Hosenkoside A and its inhibitory effect in cervical cancer

We reported the anti-cervical cancer effect of proprietary saponin content from seeds of Impatiens balsamina L., Hosenkoside A. Our study found that Hosenkoside A significantly promotes cell apoptosis and cell cycle arrest after administration, exhibiting anti-tumor effects. Then the transcriptome sequencing results after administration showed that Hosenkoside A had a significant inhibitory effect on Histone deacetylase 3 (HDAC3). After sufficient administration time, the inhibition of HDAC3 expression level leads to a significant decrease in lysine acetylation at histone 3 sites 4 and 9, blocking the activation of Signal transducer and activator of transcription 3 (STAT3) and achieving anti-tumor effects. In addition, we encapsulated Hosenkoside A into polypeptide metal complexes (PMC) to form slow-release spheres. This material breaks down in the tumor environment, not only does it solve the problem of low drug solubility, but it also achieves targeted sustained-release drug delivery. Under the same concentration of stimulation, the PMC complex group showed better anti-tumor effects in both in vitro and in vivo experiments.

Enhanced stability of Foot-and-Mouth Disease Vaccine Antigens with a novel formulation

The structural instability of inactivated foot-and-mouth disease virus antigen hinders the development of vaccine industry. The use of an inexpensive, biocompatible formulation to slow down the degradation of antigen would address the problem. Here, PBS was showed to be effective in stabilizing 146S and hence determined as basic solution buffer. Excipients such as Trehalose, Sucrose, Arginine, Cysteine, Calcium chloride, BSA and Ascorbic acid were found to protect 146S from massive structural breakdown. Using orthogonal test, we confirmed the novel formulation as a combination of 5% (w/v) trehalose, 5% (w/v) sucrose, 0.05 M arginine, 0.01 M cysteine, 0.01 M calcium chloride, 1% (W/V) BSA and 0.001 M ascorbic acid in PBS. The formulation increased vaccine stabilization, with retention rate of 14% after storage at 4 °C for 14 months. Particle size for vaccine was at approximately 220 nm and physicochemical detecting findings were rarely abnormal in morphology and emulsion type. In summary, these results revealed that the novel formulation is beneficial to make FMD vaccine more stable and effective, reducing the dependence on cold storage and delivery.

Protein Nanoparticles: Uniting the Power of Proteins with Engineering Design Approaches

Protein nanoparticles, PNPs, have played a long-standing role in food and industrial applications. More recently, their potential in nanomedicine has been more widely pursued. This review summarizes recent trends related to the preparation, application, and chemical construction of nanoparticles that use proteins as major building blocks. A particular focus has been given to emerging trends related to applications in nanomedicine, an area of research where PNPs are poised for major breakthroughs as drug delivery carriers, particle-based therapeutics or for non-viral gene therapy.

Magnetic Resonance Imaging-Guided Multi-Stimulus-Responsive Drug Delivery Strategy for Personalized and Precise Cancer Treatment

The emergence of nano-targeted controlled release liposomal drug carriers has provided a breakthrough in cancer therapy. However, their clinical efficacy is unsatisfactory, which is related to individualized differences in targeted drugs and poor in vivo release efficiency. In this paper, we prepared a class of personalized targeted and precisely controlled-release therapeutic drug carriers (GF liposomes) by co-assembling targeting and traceable o-nitrobenzyl ester lipids to propose a magnetic resonance imaging (MRI)-guided personalized in vivo targeted drug screening strategy and a multi-stimulus superimposed controlled-release strategy. Furthermore, by following the drug release process of drug-loaded liposomes (GF-D), it was found that these liposomes could rely on energy superposition to achieve more sensitive and efficient controlled drug release. In addition, the indispensable adjustment of liposome formulation for personalized MRI-based targeted therapy was verified by differential cellular uptake and in vivo magnetic resonance imaging. In the end, the 10.22-fold tumor suppression effect in the stimulus superposition group (GF-D-UV) indicates that the multi-stimulus cumulative response strategy and MRI-guided in vivo screening strategy can more effectively treat cancer. This contribution provides a concise and clever design idea for the future development of personalized precise and efficient clinical cancer therapies.

Insights on the emerging biotechnology of histidine-rich peptides

In the late 70's, the discovery of the restriction enzymes made possible the biological production of functional proteins by recombinant DNA technologies, a fact that largely empowered both biotechnological and pharmaceutical industries. Short peptides or small protein domains, with specific molecular affinities, were developed as purification tags in downstream processes to separate the target protein from the culture media or cell debris, upon breaking the producing cells. Among these tags, and by exploiting the interactivity of the imidazole ring of histidine residues, the hexahistidine peptide (H6) became a gold standard. Although initially used almost exclusively in protein production, H6 and related His-rich peptides are progressively proving a broad applicability in novel utilities including enzymatic processes, advanced drug delivery systems and diagnosis, through a so far unsuspected adaptation of their binding capabilities. In this context, the coordination of histidine residues and metals confers intriguing functionalities to His-rich sequences useable in the forward-thinking design of protein-based nano- and micro-materials and devices, through strategies that are comprehensively presented here.

Metal-Coordinated Supramolecular Self-Assemblies for Cancer Theranostics

Metal-coordinated supramolecular nanoassemblies have recently attracted extensive attention as materials for cancer theranostics. Owing to their unique physicochemical properties, metal-coordinated supramolecular self-assemblies can bridge the boundary between traditional inorganic and organic materials. By tailoring the structural components of the metal ions and binding ligands, numerous multifunctional theranostic nanomedicines can be constructed. Metal-coordinated supramolecular nanoassemblies can modulate the tumor microenvironment (TME), thus facilitating the development of TME-responsive nanomedicines. More importantly, TME-responsive organic-inorganic hybrid nanomaterials can be constructed in vivo by exploiting the metal-coordinated self-assembly of a variety of functional ligands, which is a promising strategy for enhancing the tumor accumulation of theranostic molecules. In this review, recent advancements in the design and fabrication of metal-coordinated supramolecular nanomedicines for cancer theranostics are highlighted. These supramolecular compounds are classified according to the order in which the coordinated metal ions appear in the periodic table. Furthermore, the prospects and challenges of metal-coordinated supramolecular self-assemblies for both technical advances and clinical translation are discussed. In particular, the superiority of TME-responsive nanomedicines for in vivo coordinated self-assembly is elaborated, with an emphasis on strategies that enhance the accumulation of functional components in tumors for an ideal theranostic outcome.

Possible Action of Transition Divalent Metal Ions at the Inter-Pentameric Interface of Inactivated Foot-and-Mouth Disease Virus Provide A Simple but Effective Approach to Enhance Stability

The structural instability of inactivated foot-and-mouth disease virus (FMDV) hinders the development of vaccine industry. Here we found that some transition metal ions like Cu²⁺ and Ni²⁺ could specifically bind to FMDV capsids at capacities about 7089 and 3448 metal ions per capsid, respectively. These values are about 33- and 16-folds of the binding capacity of non-transition metal ion Ca²⁺ (about 214 per capsid). Further thermodynamic studies indicated that all these three metal ions bound to the capsids in spontaneous enthalpy driving manners (ΔG<0, ΔH<0, ΔS<0), and the Cu²⁺ binding had the highest affinity. The binding of Cu²⁺ and Ni²⁺ could enhance both the thermostability and acid-resistant stability of capsids, while the binding of Ca²⁺ was helpful only to the thermostability of the capsids. Animal experiments showed that the immunization of FMDV bound with Cu²⁺ induced the highest specific antibody titers in mice. Coincidently, the FMDV bound with Cu²⁺ exhibited significantly enhanced affinities to integrin β6 and heparin sulfate, both of which are important cell surface receptors for FMDV attaching. Finally, the specific interaction between capsids and Cu²⁺ or Ni²⁺ was applied to direct purification of FMDV from crude cell culture feedstock by the immobilized metal affinity chromatography. Based on our new findings and structural analysis of the FMDV capsid, a "transition metal ion bridges" mechanism that describes linkage between adjacent histidine and other amino acids at the inter-pentameric interface of the capsids by transition metal ions coordination action was proposed to explain their stabilizing effect imposed on the capsid.IMPORTANCE How to stabilize the inactivated FMDV without affecting virus infectivity and immunogenicity is a big challenge in vaccine industry. The electrostatic repulsion induced by protonation of a large amount of histidine residues at the inter-pentameric interface of viral capsids is one of the major mechanisms causing the dissociation of capsids. In the present work, this structural disadvantage inspired us to stabilize the capsids through coordinating transition metal ions with the adjacent histidine residues in FMDV capsid, instead of removing or substituting them. This approach was proved effective to enhance not only the stability of FMDV, but also enhance the specific antibody responses; thus, providing a new guideline for designing an easy-to-use strategy suitable for large-scale production of FMDV vaccine antigen.

Dual Self-Assembled Nanostructures from Intrinsically Disordered Protein Polymers with LCST Behavior and Antimicrobial Peptides

Antimicrobial peptides (AMPs) have attracted great interest as they constitute one of the most promising alternatives against drug-resistant infections. Their amphipathic nature not only provides them antimicrobial and immunomodulatory properties but also the ability to self-assemble into supramolecular nanostructures. Here, we propose their use as self-assembling domains to drive hierarchical organization of intrinsically disordered protein polymers (IDPPs). Using a modular approach, hybrid protein-engineered polymers were recombinantly produced, thus combining designer AMPs and a thermoresponsive IDPP, an elastin-like recombinamer (ELR). We exploited the ability of these AMPs and ELRs to self-assemble to develop supramolecular nanomaterials by way of a dual-assembly process. First, the AMPs trigger the formation of nanofibers; then, the thermoresponsiveness of the ELRs enables assembly into fibrillar aggregates. The interplay between the assembly of AMPs and ELRs provides an innovative molecular tool in the development of self-assembling nanosystems with potential use for biotechnological and biomedical applications.

Divalent Cations: A Molecular Glue for Protein Materials

Among inorganic materials, divalent cations modulate thousands of physiological processes that support life. Their roles in protein assembly and aggregation are less known, although they are progressively being brought to light. We review the structural roles of divalent cations here, as well as the novel protein materials that are under development, in which they are used as glue-like agents. More specifically, we discuss how mechanically stable nanoparticles, fibers, matrices, and hydrogels are generated through their coordination with histidine-rich proteins. We also describe how the rational use of divalent cations combined with simple protein engineering offers unexpected and very simple biochemical approaches to biomaterial design that might address unmet clinical needs in precision medicine.

Enzyme encapsulation by protein cages

Protein cages are hollow protein shells with a nanometric cavity that can be filled with useful materials. The encapsulating nature of the cages means that they are particularly attractive for loading with biological macromolecules, affording the guests protection in conditions where they may be degraded. Given the importance of proteins in both industrial and all cellular processes, encapsulation of functional protein cargoes, particularly enzymes, are of high interest both for in vivo diagnostic and therapeutic use as well as for ex vivo applications. Increasing knowledge of protein cage structures at high resolution along with recent advances in producing artificial protein cages means that they can now be designed with various attachment chemistries on their internal surfaces - a useful tool for cargo capture. Here we review the different available attachment strategies that have recently been successfully demonstrated for enzyme encapsulation in protein cages and consider their future potential.

Genetically Engineered Elastin-based Biomaterials for Biomedical Applications

Protein-based polymers are some of the most promising candidates for a new generation of innovative biomaterials as recent advances in genetic-engineering and biotechnological techniques mean that protein-based biomaterials can be designed and constructed with a higher degree of complexity and accuracy. Moreover, their sequences, which are derived from structural protein-based modules, can easily be modified to include bioactive motifs that improve their functions and material-host interactions, thereby satisfying fundamental biological requirements. The accuracy with which these advanced polypeptides can be produced, and their versatility, self-assembly behavior, stimuli-responsiveness and biocompatibility, means that they have attracted increasing attention for use in biomedical applications such as cell culture, tissue engineering, protein purification, surface engineering and controlled drug delivery. The biopolymers discussed in this review are elastin-derived protein-based polymers which are biologically inspired and biomimetic materials. This review will also focus on the design, synthesis and characterization of these genetically encoded polymers and their potential utility for controlled drug and gene delivery, as well as in tissue engineering and regenerative medicine.

Versatile Reversible Cross-Linking Strategy to Stabilize CCMV Virus Like Particles for Efficient siRNA Delivery

Virus like particles obtained from the Cowpea Chlorotic Mottle Virus (CCMV) represent an innovative platform for drug delivery applications. Their unique reversible self-assembly properties as well as their suitability for both cargo loading and functionalization make them a versatile scaffold for numerous purposes. One of the main drawbacks of this platform is however its limited stability at physiological conditions. Herein, we report the development of a general reversible cross-linking strategy involving the homobifunctional cross-linker DTSSP (3,3′-dithiobis (sulfosuccinimidylpropionate)) which is suitable for particle stabilization. This methodology is adaptable to different CCMV variants in the presence or absence of a stabilizing cargo without varying neither particle shape nor size thus extending the potential use of these protein cages in nanomedical applications. Cross-linked particles are stable at neutral pH and 37 °C and they are capable of protecting loaded cargo against enzymatic digestion. Furthermore, the reversible nature of the cross-linking ensures particle disassembly when they are taken up by cells. This was demonstrated via the highly effective delivery of active siRNA into cells.

Supramolecular Protein Nanodrugs with Coordination- and Heating-Enhanced Photothermal Effects for Antitumor Therapy

Supramolecular protein nanodrugs provide opportunities for improving antitumor therapeutic efficiency and lowering toxicity. However, protein nanodrugs that have robust structural stability and enhanced therapeutic efficiency are still in infancy. In this study, photothermal protein nanodrugs are constructed through a supramolecular approach along with heating by using proteins, photosensitizers, and metal ions as the building blocks. The metal coordination and heating improve not only the structural stability but also photothermal performance of the resulting nanodrugs. By virtue of the first integration of coordination- and heating-enhanced photothermal effects, the nanodrugs show superior photothermal conversion efficiency, enhanced tumor accumulation, and improved tumor inhibition. Metal coordination and heating are versatile to be applied for various protein nanodrugs. Hence, this study provides insights for the construction of highly efficient photothermal nanodrugs and thus will be beneficial to precision theranostics.

Cation-Directed Self-Assembly of Macrocyclic Diacetylene for Developing Chromogenic Polydiacetylene

The cation-directed self-assembly process has emerged as a fascinating approach for constructing supramolecular architectures and manifested a diverse range of assembly related applications. Herein, we synthesized a macrocyclic structure containing bis-amidopyridine and photopolymerizable diacetylene template, PyMCDA. Owing to the metal coordination affinity of bis-amidopyridine and the π-π stacking characteristic of diacetylene template and complementary to the cyclic molecular framework, Cs⁺-directed organic nanotubes are generated via unidirectional self-assembly of PyMCDA. The monomeric PyMCDA nanotubes are transformed into the covalently cross-linked chromogenic polydiacetylene nanotubes (PyMCPDA-Cs⁺) by UV-promoted topochemical polymerization. The result of a metal-ligand coordination characteristic, geometric parameters in solid-state assemblies, and topochemical polymerization behavior reveals a generation of Cs⁺ ion inserted nanotubes. Interestingly, PyMCDA-Cs⁺ nanotubes display thermochromic property with a brilliant blue-to-red color transition.

Construction of supramolecular nanotubes from protein crystals

Investigations involving the design of protein assemblies for the development of biomaterials are receiving significant attention. In nature, proteins can be driven into assemblies frequently by various non-covalent interactions. Assembly of proteins into supramolecules can be conducted under limited conditions in solution. These factors force the assembly process into an equilibrium state with low stability. Here, we report a new method for preparing assemblies using protein crystals as non-equilibrium molecular scaffolds. Protein crystals provide an ideal environment with a highly ordered packing of subunits in which the supramolecular assembled structures are formed in the crystalline matrix. Based on this feature, we demonstrate the self-assembly of supramolecular nanotubes constructed from protein crystals triggered by co-oxidation with cross-linkers. The assembly of tubes is driven by the formation of disulfide bonds to retain the intermolecular interactions within each assembly in the crystalline matrix after dissolution of the crystals.

Unique stabilizing mechanism provided by biocompatible choline-based ionic liquids for inhibiting dissociation of inactivated foot-and-mouth disease virus particles

Choline-based ionic liquids provide a unique stabilizing mechanism for inhibiting the dissociation of inactivated foot-and-mouth disease virus particles.

Metal Ion-Induced Self-Assembly and Packaging of CCMV Nanocapsules

The controlled self-assembly of protein cages is vital for the use of these nanocompartments in biomedical and nanotechnological applications. Recently, we showed that by combining different structural peptide elements, it is possible to assemble viral capsid proteins in distinct well-defined morphologies. In this chapter, a triblock copolypeptide is discussed, consisting of a metal ion-coordinating hexahistidine tag, a stimulus-responsive elastin-like polypeptide and a pH-responsive self-assembling viral capsid protein. This protein is able to form two different types of capsids, depending on the assembly pathway that is followed. Here, we focus on the metal ion-induced assembly process and describe the relevant experimental procedures to induce and utilize this assembly behavior.

Control of Amphiphile Self-Assembly via Bioinspired Metal Ion Coordination

Inspired by marine siderophores that exhibit a morphological shift upon metal coordination, hybrid peptide-polymer conjugates that assemble into different morphologies based on the nature of the metal ion coordination have been designed. Coupling of a peptide chelator, hexahistidine, with hydrophobic oligostyrene allows a modular strategy to be established for the efficient synthesis and purification of these tunable amphiphiles (oSt(His)6). Remarkably, in the presence of different divalent transition metal ions (Mn, Co, Ni, Cu, Zn, and Cd) a variety of morphologies were observed. Zinc(II), cobalt(II), and copper(II) led to aggregated micelles. Nickel(II) and cadmium(II) produced micelles, and multilamellar vesicles were obtained in the presence of manganese(II). This work highlights the significant potential for transition metal ion coordination as a tool for directing the assembly of synthetic nanomaterials.

Engineering and delivery of nanocolloids of hydrophobic drugs

A lot of efforts have been devoted to engineering the delivery of hydrophobic drugs due to the high demand of chemotherapy against cancer. While early developed liposomes and polymeric nanoparticles did not meet the requirements of high drug loading efficiency, pure drug nanoparticles appeared to meet these together with high stability. Current drug delivery systems demand an improved performance over the whole aspects of stability, loading capacity, and therapeutic effects. As a result, both new techniques based on traditional methods and totally new procedures are under investigation. In this review, we focus on the evaluation of pure drug nanolloids fabricated by different engineering protocols with emphasis on the size and morphology, delivery and controlled release, and therapeutic effects of these drug nanocolloids.

His-Tag-Mediated Dimerization of Chemoreceptors Leads to Assembly of Functional Nanoarrays

Transmembrane chemotaxis receptors are found in bacteria in extended hexagonal arrays stabilized by the membrane and by cytosolic binding partners, the kinase CheA and coupling protein CheW. Models of array architecture and assembly propose receptors cluster into trimers of dimers that associate with one CheA dimer and two CheW monomers to form the minimal "core unit" necessary for signal transduction. Reconstructing in vitro chemoreceptor ternary complexes that are homogeneous and functional and exhibit native architecture remains a challenge. Here we report that His-tag-mediated receptor dimerization with divalent metals is sufficient to drive assembly of nativelike functional arrays of a receptor cytoplasmic fragment. Our results indicate receptor dimerization initiates assembly and precedes formation of ternary complexes with partial kinase activity. Restoration of maximal kinase activity coincides with a shift to larger complexes, suggesting that kinase activity depends on interactions beyond the core unit. We hypothesize that achieving maximal activity requires building core units into hexagons and/or coalescing hexagons into the extended lattice. Overall, the minimally perturbing His-tag-mediated dimerization leads to assembly of chemoreceptor arrays with native architecture and thus serves as a powerful tool for studying the assembly and mechanism of this complex and other multiprotein complexes.

Stabilization of a Virus-Like Particle and Its Application as a Nanoreactor at Physiological Conditions

Virus-like particles are very interesting tools for application in bionanotechnology, due to their monodisperse features and biocompatibility. In particular, the cowpea chlorotic mottle virus (CCMV) capsid has been studied extensively as it can be assembled and disassembled reversibly, facilitating cargo encapsulation. CCMV is, however, only stable at physiological conditions when its endogenous nucleic acid cargo is present. To gain more flexibility in the type of cargo encapsulated and to broaden the window of operation, it is interesting to improve the stability of the empty virus-like particles. Here, a method is described to utilize the CCMV capsid at close to physiological conditions as a stable, enzyme-filled nanoreactor. As a proof-of-principle, the encapsulation of T4 lysozyme (T4L) was chosen; this enzyme is a promising antibiotic, but its clinical application is hampered by, for example, its cationic character. It was shown that four T4L molecules can successfully be encapsulated inside CCMV capsids, while remaining catalytically active, which could thus improve the enzyme’s application potential.

Polymeric Biomaterials: Diverse Functions Enabled by Advances in Macromolecular Chemistry

Biomaterials have been extensively used to leverage beneficial outcomes in various therapeutic applications, such as providing spatial and temporal control over the release of therapeutic agents in drug delivery as well as engineering functional tissues and promoting the healing process in tissue engineering and regenerative medicine. This perspective presents important milestones in the development of polymeric biomaterials with defined structures and properties. Contemporary studies of biomaterial design have been reviewed with focus on constructing materials with controlled structure, dynamic functionality, and biological complexity. Examples of these polymeric biomaterials enabled by advanced synthetic methodologies, dynamic chemistry/assembly strategies, and modulated cell-material interactions have been highlighted. As the field of polymeric biomaterials continues to evolve with increased sophistication, current challenges and future directions for the design and translation of these materials are also summarized.