Strong Improvement of Long-Term Chemical and Thermal Stability of Plasmonic Silver Nanoantennas and Films

First-principles study of mercaptoundecanoic acid molecule adsorption and gas molecule penetration onto silver surface: an insight for corrosion protection

Recently, 11-mercaptoundecanoic acid (MUA) molecule has attracted attention as a promising passivation agent of Ag nanowire (NW) network electrode for corrosion inhibition, but the underneath mechanism has not been elaborated. In this work, we investigate adsorption of MUA molecule on Ag(1 0 0) and Ag(1 1 1) surface, adsorption of air gas molecules of H2O, H2S and O2 on MUA molecular end surface, and their penetrations into the Ag surface using the first-principles calculations. Our calculations reveal that the MUA molecule is strongly bound to the Ag surface with the binding energies ranging from -0.47 to -2.06 eV and the Ag-S bond lengths of 2.68-2.97 Å by Lewis acid-base reaction. Furthermore, we find attractive interactions between the gas molecules and the MUA@Ag complexes upon their adsorptions and calculate activation barriers for their migrations from the outermost end of the complexes to the top of Ag surface. It is found that the penetrations of H2O and H2S are more difficult than the O2 penetration due to their higher activation barriers, while the O2 penetration is still difficult, confirming the corrosion protection of Ag NW network by adsorbing the uniform monolayer of MUA. With these findings, this work can contribute to finding a better passivation agent in the strategy of corrosion protection of Ag NW network electrode.

Molecular Plasmonic Silver Forests for the Photocatalytic-Driven Sensing Platforms

Structural electronics, as well as flexible and wearable devices are applications that are possible by merging polymers with metal nanoparticles. However, using conventional technologies, it is challenging to fabricate plasmonic structures that remain flexible. We developed three-dimensional (3D) plasmonic nanostructures/polymer sensors via single-step laser processing and further functionalization with 4-nitrobenzenethiol (4-NBT) as a molecular probe. These sensors allow ultrasensitive detection with surface-enhanced Raman spectroscopy (SERS). We tracked the 4-NBT plasmonic enhancement and changes in its vibrational spectrum under the chemical environment perturbations. As a model system, we investigated the sensor's performance when exposed to prostate cancer cells' media over 7 days showing the possibility of identifying the cell death reflected in the environment through the effects on the 4-NBT probe. Thus, the fabricated sensor could have an impact on the monitoring of the cancer treatment process. Moreover, the laser-driven nanoparticles/polymer intermixing resulted in a free-form electrically conductive composite that withstands over 1000 bending cycles without losing electrical properties. Our results bridge the gap between plasmonic sensing with SERS and flexible electronics in a scalable, energy-efficient, inexpensive, and environmentally friendly way.

Investigation of organic monoradicals reactivity using surface-enhanced Raman spectroscopy

Surface-enhanced Raman spectroscopy (SERS) and self-assembled monolayer (SAM) approaches were used to investigate the reactions of organic monoradicals with methanol. An attempt was made to generate monoradicals from thiophenols and phenylmethanethiols substituted with bromine, iodine, and nitro groups by irradiation with UV light. Monolayers of radical precursors were deposited on SERS substrates, which were then immersed in methanol and irradiated for 1 and/or 3, 6, 12 and 24 h in a UV photochemical reactor. Pre- and postreaction SERS spectra were obtained by using a confocal Raman microscope and compared with the spectra of expected products of the radical reaction with methanol. Our studies have shown that the efficiency of monoradical generation is highly dependent on the chemical structure of the precursor. In addition, it is shown that both the SERS substrate and experimental conditions used strongly influence the obtained results.

Innovative Codeposition of a Ag-Al2O3 Layer: An Attractive Combination of High Durability and Lack of Cytotoxicity for Public Space Applications

Today, the use of silver in surfaces for public environments is very frequent, as it ensures high antimicrobial activities, avoiding the continuous disinfection of the surfaces themselves. Similarly, thanks to its interesting combination of technological properties, anodized aluminum is widely employed in the production of components for applications in public spaces. Therefore, this work describes a simple method of the codeposition of silver and anodized aluminum to combine the remarkable properties of Al₂O₃ layers with the antibacterial performances of silver. The effect of silver in modifying the durability features of the anodized aluminum layer was evaluated by means of various accelerated degradation techniques, such as the exposure in a climatic chamber to UV-B radiation or an aggressive atmosphere simulated by the Kesternich test. These analyses showed the good compatibility between Ag and the alumina matrix, whose durability performances were not particularly influenced by silver. Furthermore, the composite layers did not express relevant cytotoxicity activity, as evidenced by Trypan blue flow cytometry analysis and microscopy observations, ensuring the possible use of this material in applications in close contact with humans. This same conclusion was reached by observing an almost negligible ionic release of Ag by the composite layers, even following severe degradation of the alumina matrix due to exposure to a particular acid solution. In conclusion, this work presents an innovative material that can be used in public spaces, thanks to its interesting combination of high durability and low cytotoxicity.

Robustness Analysis of Metasurfaces: Perfect Structures Are Not Always the Best

Optical metasurfaces rely on subwavelength scale nanostructures, which puts significant constraints on nanofabrication accuracies. These constraints are becoming increasingly important, as metasurfaces are maturing toward real applications that require the fabrication of very large area samples. Here, we focus on beam steering gradient metasurfaces and show that perfect nanofabrication does not necessarily equate with best performances: metasurfaces with missing elements can actually be more efficient than intact metasurfaces. Both plasmonic metasurfaces in reflection and dielectric metasurfaces in transmission are investigated. These findings are substantiated by experiments on purposely misfabricated metasurfaces and full-wave calculations. A very efficient quasi-analytical model is also introduced for the design and simulations of metasurfaces; it agrees very well with full-wave calculations. Our findings indicate that the substrate properties play a key role in the robustness of a metasurface and the smoothness of the approximated phase gradient controls the device efficiency.

A Low-Temperature Annealing Method for Alloy Nanostructures and Metasurfaces: Unlocking a Novel Degree of Freedom

The material and exact shape of a nanostructure determine its optical response, which is especially strong for plasmonic metals. Unfortunately, only a few plasmonic metals are available, which limits the spectral range where these strong optical effects can be utilized. Alloying different plasmonic metals can overcome this limitation, at the expense of using a high-temperature alloying process, which adversely destroys the nanostructure shape. Here, a low-temperature alloying process is developed where the sample is heated at only 300 °C for 8 h followed by 30 min at 450 °C and Au-Ag nanostructures with a broad diversity of shapes, aspect ratios, and stoichiometries are fabricated. Energy-dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy analyses confirm the homogeneous alloying through the entire sample. Varying the alloy stoichiometry tunes the optical response and controls spectral features, such as Fano resonances. Binary metasurfaces that combine nanostructures with different stoichiometries are fabricated using multiple-step electron-beam lithography, and their optical function as a hologram or a Fresnel zone plate is demonstrated at the visible wavelength of λ = 532 nm. This low-temperature annealing technique provides a versatile and cost-effective way of fabricating complex Au-Ag nanostructures with arbitrary stoichiometry.

Corrosion processes of silver nanoparticles

The corrosion of silver nanoparticles (AgNPs) on exposure to ambient air was studied using imaging and analysis in the scanning transmission electron microscope (STEM). Secondary particles are formed on exposure to ambient air, and these are more numerous and more widely distributed as the relative humidity increases. Energy-dispersive X-ray analysis (EDS) confirms that the particles contain Ag and S. Electron energy loss spectra (EELS) in the valence part of the spectrum (< ~ 50 eV) identify the corrosion product as Ag2S on comparison with spectra from reference compounds. The EELS measurements also allow for a direct visualisation of the shift in the energy of the surface plasmon peak that occurs when the corrosion product is in contact with the particle. The experiments confirm that advanced electron microscopy methods have an important role in investigating corrosion of nanoparticulate systems.

Preparation and properties of water-based acrylic emulsion-assisted flexible building tiles

The heavy and rigid appearance of conventional burnt building tiles is not suitable for a global sustainable development strategy. Flexible facing tiles with lightweight and environmental materials are highly desirable for the construction industry today. In this work, water-based polymer emulsion-assisted flexible building tiles were prepared. Based on the method of achieving post crosslinking and improving adhesion with inorganic matrix-based materials, WPAs modified with GMA and KH570 display good chemical resistance and low solvent absorption (0.132 in water and 0.289 in ethanol respectively). The optimum mechanical performance of flexible building materials prepared with WPAs can strain 1.406% and stress 1.8658 MPa. The TGA, XRD, SEM and AFM results further indicate the excellent thermal stability and compatibility of flexible building tiles. Hence, flexible building tiles prepared with WPAs can be promising building materials for construction.

Overview and emerging trends in optical fiber aptasensing

Optical fiber biosensors have attracted growing interest over the last decade and quickly became a key enabling technology, especially for the detection of biomarkers at extremely low concentrations and in small volumes. Among the many and recent fiber-optic sensing amenities, aptamers-based sensors have shown unequalled performances in terms of ease of production, specificity, and sensitivity. The immobilization of small and highly stable bioreceptors such as DNA has bolstered their use for the most varied applications e.g., medical diagnosis, food safety and environmental monitoring. This review highlights the recent advances in aptamer-based optical fiber biosensors. An in-depth analysis of the literature summarizes different fiber-optic structures and biochemical strategies for molecular detection and immobilization of receptors over diverse surfaces. In this review, we analyze the features offered by those sensors and discuss about the next challenges to be addressed. This overview investigates both biochemical and optical parameters, drawing the guiding lines for forthcoming innovations and prospects in this ever-growing field of research.

Fabrication of plasmonic structures with well-controlled nanometric features: a comparison between lift-off and ion beam etching

After providing a detailed overview of nanofabrication techniques for plasmonics, we discuss in detail two different approaches for the fabrication of metallic nanostructures based on e-beam lithography. The first approach relies on a negative e-beam resist, followed by ion beam milling, while the second uses a positive e-beam resist and lift-off. Overall, ion beam etching provides smaller and more regular features including tiny gaps between sub-parts, that can be controlled down to about 10 nm. In the lift-off process, the metal atoms are deposited within the resist mask and can diffuse on the substrate, giving rise to the formation of nanoclusters that render the nanostructure outline slightly fuzzy. Scattering cross sections computed for both approaches highlight some spectral differences, which are especially visible for structures that support complex resonances, such as Fano resonances. Both techniques can produce useful nanostructures and the results reported therein should guide the researcher to choose the best suited approach for a given application, depending on the available technology.

On the stability of microwave-fabricated SERS substrates - chemical and morphological considerations

The stability of surface-enhanced Raman spectroscopy (SERS) substrates in different organic solvents and different buffer solutions was investigated. SERS substrates were fabricated by a microwave-assisted synthesis approach and the morphological as well as chemical changes of the SERS substrates were studied. It was demonstrated that the SERS substrates treated with methanol, ethanol, or N,N-dimethylformamide (DMF) were comparable and showed overall good stability and did not show severe morphological changes or a strong decrease in their Raman activity. Toluene treatment resulted in a strong decrease in the Raman activity whereas dimethyl sulfoxide (DMSO) treatment completely preserved or even slightly improved the Raman enhancement capabilities. SERS substrates immersed into phosphate-buffered saline (PBS) solutions were observed to be rather instable in low and neutral pH buffer solutions. Other buffer systems showed less severe influences on the SERS activity of the substrates and a carbonate buffer at pH 10 was found to even improve SERS performance. This study represents a guideline on the stability of microwave-fabricated SERS substrates or other SERS substrates consisting of non-stabilized silver nanoparticles for the application of different organic solvents and buffer solutions.

Extraordinary sensitivity enhancement of Ag-Au alloy nanohole arrays for label-free detection of Escherichia Coli

Alloy nanostructures unveil extraordinary plasmonic phenomena that supersede the mono-metallic counterparts. Here we report silver-gold (Ag-Au) alloy nanohole arrays (α-NHA) for ultra-sensitive plasmonic label-free detection of Escherichia Coli (E. coli). Large-area α-NHA were fabricated by using nanoimprint lithography and concurrent thermal evaporation of Ag and Au. The completely miscible Ag-Au alloy exhibits an entirely different dielectric function in the near infra-red wavelength range compared to mono-metallic Ag or Au. The α-NHA demonstrate substantially enhanced refractive index sensitivity of 387 nm/RIU, surpassing those of Ag or Au mono-metallic nanohole arrays by approximately 40%. Moreover, the α-NHA provide highly durable material stability to corrosion and oxidation during over one-month observation. The ultra-sensitive α-NHA allow the label-free detection of E. coli in various concentration levels ranging from 10³ to 10⁸ cfu/ml with a calculated limit of detection of 59 cfu/ml. This novel alloy plasmonic material provides a new outlook for widely applicable biosensing and bio-medical applications.

Epitaxial Silver Films Morphology and Optical Properties Evolution over Two Years

Silver and gold are the most commonly used materials in optics and plasmonics. Silver has the lowest optical losses in the visible and near-infrared wavelength range, but it faces a serious problem—degradation over time. It has been repeatedly reported that the optical properties of silver thin films rapidly degrade when exposed to the atmosphere. This phenomenon was described by various mechanisms: rapid silver oxidation, sorption of sulfur or oxygen, formation of silver compounds with chlorine, sulfur, and oxygen. In this work, we systematically studied single-crystalline silver films from 25 to 70 nm thicknesses for almost two years. The surface morphology, crystalline structure and optical characteristics of the silver films were measured using spectroscopic ellipsometry, ultra-high-resolution scanning electron microscopy, and stylus profilometry under standard laboratory conditions. After 19 months, bulk structures appeared on the surface of thin films. These structures are associated with relaxation of internal stresses combined with dewetting. Single-crystalline silver films deposited using the single-crystalline continuous ultra-smooth, low-loss, low-cost (SCULL) technology with a thickness of 35–50 nm demonstrated the best stability in terms of degradation. We have shown that the number of defects (grain boundaries and joints of terraces) is one of the key factors that influence the degradation intensity of silver films.

Navigation of Silver/Carbon Nanoantennas in Organic Fluids Explored by a Two-Wave Mixing

Within this work are analyzed third-order nonlinear optical properties with a potential influence on the dynamic mechanics exhibited by metal/carbon nanofluids. The nanofluids were integrated by multiwall carbon nanotubes decorated with Ag nanoparticles suspended in ethanol or in acetone. Optical third-order nonlinearities were experimentally explored by vectorial two-wave mixing experiments with a Nd-YAG laser system emitting nanosecond pulses at a 532 nm wavelength. An optically induced birefringence in the metal/organic samples seems to be responsible for a significant modification in density and compressibility modulus in the nanosystems. The measured nonlinear refractive index was associated with a thermal process together with changes in density, compressibility modulus and speed of sound in the samples. Nanofluid diffusivity was studied to characterize the dynamic concentration gradients related to the precipitation of nanostructures in the liquid solutions. The evolution of the nanoparticle density suspended in the nanofluids was considered as a temporal-resolved probabilistic system. It is stated that the incorporation of Ag nanoparticles in carbon nanotubes produces strong mechanical changes in carbon-based nanofluids. According to numerical simulations and optical evaluations, immediate applications for developing dynamic nanoantennas optical logic gates and quantum-controlled metal/carbon systems can be contemplated.

Applications and challenges of thermoplasmonics

Over the past two decades, there has been a growing interest in the use of plasmonic nanoparticles as sources of heat remotely controlled by light, giving rise to the field of thermoplasmonics. The ability to release heat on the nanoscale has already impacted a broad range of research activities, from biomedicine to imaging and catalysis. Thermoplasmonics is now entering an important phase: some applications have engaged in an industrial stage, while others, originally full of promise, experience some difficulty in reaching their potential. Meanwhile, innovative fundamental areas of research are being developed. In this Review, we scrutinize the current research landscape in thermoplasmonics, with a specific focus on its applications and main challenges in many different fields of science, including nanomedicine, cell biology, photothermal and hot-electron chemistry, solar light harvesting, soft matter and nanofluidics.

Effect of Flash Light Sintering on Silver Nanowire Electrode Networks

We investigated the flash light sintering process to effectively reduce electrical resistance in silver nanowire networks. The optimum condition of the flash light sintering process reduces the electrical resistance by ~20%, while the effect of the conventional thermal annealing processes is rather limited for silver nanowire networks. After flash light sintering, the morphology of the junction between the silver nanowires changes to a mixed-phase structure of the two individual nanowires. This facile and fast process for silver nanowire welding could be highly advantageous to the mass production of silver nanowire networks.

Epitaxial graphene/silicon carbide intercalation: a minireview on graphene modulation and unique 2D materials

Intercalation of atomic species through epitaxial graphene on silicon carbide began only a few years following its initial report in 2004. The impact of intercalation on the electronic properties of the graphene is well known; however, the intercalant itself can also exhibit intriguing properties not found in nature. This realization has inspired new interest in epitaxial graphene/silicon carbide (EG/SiC) intercalation, where the scope of the technique extends beyond modulation of graphene properties to the creation of new 2D forms of 3D materials. The mission of this minireview is to provide a concise introduction to EG/SiC intercalation and to demonstrate a simplified approach to EG/SiC intercalation. We summarize the primary techniques used to achieve and characterize EG/SiC intercalation, and show that thermal evaporation-based methods can effectively substitute for more complex synthesis techniques, enabling large-scale intercalation of non-refractory metals and compounds including two-dimensional silver (2D-Ag) and gallium nitride (2D-GaN_x).

Increasing Silver Nanowire Network Stability through Small Molecule Passivation

Silver nanowire (AgNW) transparent electrodes show promise as an alternative to indium tin oxide (ITO). However, these nanowire electrodes degrade in air, leading to significant resistance increases. We show that passivating the nanowire surfaces with small organic molecules of 11-mercaptoundecanoic acid (MUA) does not affect electrode transparency contrary to typical passivation films, and is inexpensive and simple to deposit. The sheet resistance of a 32 nm diameter silver nanowire network coated with MUA increases by only 12% over 120 days when exposed to atmospheric conditions but kept in the dark. The increase is larger when exposed to daylight (588%), but is still nearly two orders of magnitude lower than the resistance increase of unpassivated networks. The difference between the experiments performed under daylight versus the dark exemplifies the importance of testing passivation materials under light exposure.

A Single-Crystalline Silver Plasmonic Circuit for Visible Quantum Emitters

Plasmonic waveguides are key elements in nanophotonic devices, serving as optical interconnects between nanoscale light sources and detectors. Multimode operation in plasmonic two-wire transmission lines promises important degrees of freedom for near-field manipulation and information encoding. However, highly confined plasmon propagation along gold nanostructures is typically limited to the near-infrared region due to ohmic losses, excluding all visible quantum emitters from plasmonic circuitry. We report on the top-down fabrication of complex plasmonic nanostructures in single-crystalline silver plates. We demonstrate the controlled remote excitation of a small ensemble of fluorophores by a set of waveguide modes and the emission of the visible luminescence into the waveguide with high efficiency. This approach opens up the study of a nanoscale light-matter interaction between complex plasmonic waveguides and a large variety of quantum emitters available in the visible spectral range.

Photocatalytic ammonia production enhanced by a plasmonic near-field and hot electrons originating from aluminium nanostructures

We report on plasmonic near-field and hot electron enhanced ammonia production.

Bioplasmonic Alloyed Nanoislands Using Dewetting of Bilayer Thin Films

Unlike monometallic materials, bimetallic plasmonic materials offer extensive benefits such as broadband tuning capability or high environmental stability. Here we report a broad range tuning of plasmon resonance of alloyed nanoislands by using solid-state dewetting of gold and silver bilayer thin films. Thermal dewetting after successive thermal evaporation of thin metal double-layer films readily forms AuAg-alloyed nanoislands with a precise composition ratio. The complete miscibility of alloyed nanoislands results in programmable tuning of plasmon resonance wavelength in a broadband visible range. Such extraordinary tuning capability opens up a new direction for plasmonic enhancement in biophotonic applications such as surface-enhanced Raman scattering or plasmon-enhanced fluorescence.