Synthesis of Hierarchical 4H/fcc Ru Nanotubes for Highly Efficient Hydrogen Evolution in Alkaline Media

Phase Engineering-Mediated D-Band Center of Ru Sites Promote the Hydrogen Evolution Reaction Under Universal pH Condition

The rational design of pH-universal electrocatalyst with high-efficiency, low-cost and large current output suitable for industrial hydrogen evolution reaction (HER) is crucial for hydrogen production via water splitting. Herein, phase engineering of ruthenium (Ru) electrocatalyst comprised of metastable unconventional face-centered cubic (fcc) and conventional hexagonal close-packed (hcp) crystalline phase supported on nitrogen-doped carbon matrix (fcc/hcp-Ru/NC) is successfully synthesized through a facile pyrolysis approach. Fascinatingly, the fcc/hcp-Ru/NC displayed excellent electrocatalytic HER performance under a universal pH range. To deliver a current density of 10 mA cm-2, the fcc/hcp-Ru/NC required overpotentials of 16.8, 23.8 and 22.3 mV in 1 M KOH, 0.5 M H2SO4 and 1 M phosphate buffered solution (PBS), respectively. Even to drive an industrial-level current density of 500 and 1000 mA cm-2, the corresponding overpotentials are 189.8 and 284 mV in alkaline, 202 and 287 mV in acidic media, respectively. Experimental and theoretical calculation result unveiled that the charge migration from fcc-Ru to hcp-Ru induced by work function discrepancy within fcc/hcp-Ru/NC regulate the d-band center of Ru sites, which facilitated the water adsorption and dissociation, thus boosting the electrocatalytic HER performance. The present work paves the way for construction of novel and efficient electrocatalysts for energy conversion and storage.

Water-Driven Stacking Structure Transformation of Ultrathin Ru Nanosheets for Efficient Hydrogen Evolution Reaction

Ultrathin crystalline materials are a class of popular materials that can potentially exhibit fascinating physical and chemical properties dictated by their unique stacking freedom. However, it is challenging to achieve the controllable synthesis over their stacking structure for ultrathin crystalline materials. Herein, water is employed as a key regulatory factor to realize phase engineering in ultrathin nanosheets (NSs), thereby altering stacking faults to achieve distinct stacking arrangements. Ruthenium (Ru) NSs with consistent specific surface areas but different stacking manners are fabricated through the systematic regulation of water. Based on this, it is demonstrated that the hydrogen evolution reaction (HER) performance can be significantly influenced by their stacking structures. Further in-depth investigations reveal that the distinct stacking structures of Ru NSs, featuring a limited area of side facets, will influence the energy barrier of sluggish Volmer step in HER. Ru NSs with ABC stacking exhibit an accelerated Volmer process with outstanding catalytic activity, demonstrating a remarkably low overpotential (25 mV at 10 mA cm-2) and Tafel slope (29 mV dec-1) than most of the reported HER catalysts. The work will advance the understanding of controllable synthesis methods and illuminate the structure-activity relationships in ultrathin crystalline nanomaterials.

Crystal-Phase-Selective Etching of Heterophase Au Nanostructures

Selective oxidative etching is one of the most effective ways to prepare hollow nanostructures and nanocrystals with specific exposed facets. The mechanism of selective etching in noble metal nanostructures mainly relies on the different reactivity of metal components and the distinct surface energy of multimetallic nanostructures. Recently, phase engineering of nanomaterials (PEN) offers new opportunities for the preparation of unique heterostructures, including heterophase nanostructures. However, the synthesis of hollow multimetallic nanostructures based on crystal-phase-selective etching has been rarely studied. Here, a crystal-phase-selective etching method is reported to selectively etch the unconventional 4H and 2H phases in the heterophase Au nanostructures. Due to the coating of Pt-based alloy and the crystal-phase-selective etching of 4H-Au in 4H/face-centered cubic (fcc) Au nanowires, the well-defined ladder-like Au@PtAg nanoframes are prepared. In addition, the 2H-Au in the fcc-2H-fcc Au nanorods and 2H/fcc Au nanosheets can also be selectively etched using the same method. As a proof-of-concept application, the ladder-like Au@PtAg nanoframes are used for the electrocatalytic hydrogen evolution reaction (HER) in acidic media, showing excellent performance that is comparable to the commercial Pt/C catalyst.

The Phase Control of Transition Metallic Elements via Facile Chemical and Physical Syntheses

The crystal phases of metals are important factors to tune the properties of metals, and therefore received extensive attention. Traditionally, phase control is performed within limited numbers of elements by harsh conditions, such as face-centered cubic Fe by high temperature. This review summarizes most reports in metal phase control area, including elements of Fe, Co, Ni, Cu, Ru, Pd, Rh, Os and Au. For every metallic element, the facile phase control methods are systematically introduced, such as epitaxial growth, ball milling, chemical reduction, etc. Their corresponding applications and the mechanisms for phase control are thoroughly discussed.

Recent advanced strategies for bimetallenes toward electrocatalytic energy conversion reactions

Designing low-dimensional nanomaterials is vital to address the energy and environmental crisis by means of electrocatalytic conversion reactions. Bimetallenes, as an emerging class of 2D materials, present promise for electrocatalytic conversion reactions. By leveraging atomically thin layers, bimetallenes present unsaturated surface coordination, high specific surface area and high conductivity, which are all indispensable features for heterogeneous electrochemical reactions. However, the intrinsic activity and stability of bimetallenes needs to be improved further for bimetallene electrocatalysts, due to the higher demands of practical applications. Recently, many strategies have been developed to optimize the chemical or electronic structure to accommodate transfer of reactants, adsorption or desorption of intermediates, and dissociation of products. Considering that most such work focuses on adjusting the structure, this review offers in-depth insight into recent representative strategies for optimizing bimetallene electrocatalysts, mainly including alloying, strain effects, ligand effects, defects and heteroatom doping. Moreover, by summarizing the performance of bimetallenes optimized using various strategies, we provide a means to understand structure-property relationships. In addition, future prospects and challenges are discussed for further development of bimetallene electrocatalysts.

Hollow Ru/RuO2 nanospheres with nanoparticulate shells for high performance electrocatalytic oxygen evolution reactions

This work shows that hollow Ru/RuO2 nanoparticles having nanoparticulate shells (HN-Ru/RuO2) can be prepared using hollow microporous organic polymers with Ru species (H-MOP-Ru) as precursors. Using silica spheres as templates, H-MOPs were prepared through the Sonogashira-Hagihara coupling of 1,3,5-triethynylbenzene with 2,3-ethoxymethylenedioxy-1,4-diiodobenzene. Acid hydrolysis of cyclic ethyl orthoformate protecting groups generated catechol moieties to form H-MOP-Cat. Then, H-MOP-Ru was obtained by incorporating Ru species into H-MOP-Cat. Heat-treatment of H-MOP-Ru under air induced the formation of HN-Ru/RuO2 with a diameter of 61 nm and shells consisting of 6-7 nm nanoparticles. Due to the hollow structure and nanoparticulate shells, HN-Ru/RuO2 showed a high surface area of 80 m2 g-1 and a pore volume of 0.18 cm3 g-1. The HN-Ru/RuO2 showed enhanced electrocatalytic performance for the oxygen evolution reaction (OER) with an overpotential of 295 mV @ 10 mA cm-2 and a Tafel slope of 46 mV dec-1 in alkaline electrolyte, compared with control RuO2 such as commercial Ru/RuO2 nanoparticles (A-Ru/RuO2) and home-made Ru/RuO2 nanoparticles (N-Ru/RuO2) prepared via the same synthetic procedure as HN-Ru/RuO2. While HN-Ru/RuO2 inevitably contained Pd originated from coupling catalysts, it showed superior performance to Ru/RuO2 nanoparticles with the same Pd content (N1-Ru/RuO2), indicating that the efficient electrocatalytic performance of HN-Ru/RuO2 is attributable to its hollow structure and nanoparticulate shells.

Nanostructure engineering of Pt/Pd-based oxygen reduction reaction electrocatalysts

Increasing the atomic utilization of Pt and Pd elements is the key to the advancement and broad dissemination of fuel cells. Central to this task is the design and fabrication of highly active and stable Pt- or Pd-based electrocatalysts for the oxygen reduction reaction (ORR), which requires a comprehensive understanding of the ORR pathways and mechanism. Past endeavors have accumulated a wealth of knowledge about the Pt/Pd-based ORR electrocatalysts based on structure engineering, while a systematic review of the nanostructure engineering of Pt/Pd-based ORR electrocatalysts has been rarely reported. In this review, we provide a systematic discussion about the current status of Pt/Pd-based ORR electrocatalysts from the perspective of nanostructure engineering, and we highlight the ORR pathways, mechanisms and theories in order to understand the ORR in a more complex nanocatalyst. Particularly, the underlying structure-function relationship of Pt/Pd-based ORR electrocatalysts is specifically highlighted, which will guide the future synthesis of more efficient ORR electrocatalysts.

Recent Progress on Phase Engineering of Nanomaterials

As a key structural parameter, phase depicts the arrangement of atoms in materials. Normally, a nanomaterial exists in its thermodynamically stable crystal phase. With the development of nanotechnology, nanomaterials with unconventional crystal phases, which rarely exist in their bulk counterparts, or amorphous phase have been prepared using carefully controlled reaction conditions. Together these methods are beginning to enable phase engineering of nanomaterials (PEN), i.e., the synthesis of nanomaterials with unconventional phases and the transformation between different phases, to obtain desired properties and functions. This Review summarizes the research progress in the field of PEN. First, we present representative strategies for the direct synthesis of unconventional phases and modulation of phase transformation in diverse kinds of nanomaterials. We cover the synthesis of nanomaterials ranging from metal nanostructures such as Au, Ag, Cu, Pd, and Ru, and their alloys; metal oxides, borides, and carbides; to transition metal dichalcogenides (TMDs) and 2D layered materials. We review synthesis and growth methods ranging from wet-chemical reduction and seed-mediated epitaxial growth to chemical vapor deposition (CVD), high pressure phase transformation, and electron and ion-beam irradiation. After that, we summarize the significant influence of phase on the various properties of unconventional-phase nanomaterials. We also discuss the potential applications of the developed unconventional-phase nanomaterials in different areas including catalysis, electrochemical energy storage (batteries and supercapacitors), solar cells, optoelectronics, and sensing. Finally, we discuss existing challenges and future research directions in PEN.

Enhanced CO Functionality on Carbon Papers Ensures Lowering Nucleation Delay of ALD for Ru towards Unprecedented Alkaline HER Activity

The success in lowering the nucleation delay for Atomic Layer Deposition (ALD) of Ru on carbon surfaces is mitigated by constructive pretreatments resulting enhancement of CO functionality. Treatment of the carbon papers (CP) allowed Ru species deposition for minimum number of ALD cycles (25 cycles) with good conformality. The development of electrocatalysts from single atoms to nanoparticles (NPs) on conductive supports with low metal loadings, thus improving performance, is essential in electrocatalysis. For alkaline hydrogen evolution reaction, ALD decorated CPs with Ru exhibit low onset potentials of ≈4.7 mV versus reversable hydrogen electrode (RHE) (at 10 mA cm-2 ) and a high turnover frequency of 1.92 H2 s-1 at 30 mV versus RHE. The Ru decorated CPs show comparable to higher catalytic activity than of Platinum (Pt) decorated CP also developed by ALD. The current representation of unfamiliar catalytic activities of Ru active centers developed by ALD, pave a bright and sustainable path for energy conversion reactions.

Modulating Water Splitting Kinetics via Charge Transfer and Interfacial Hydrogen Spillover Effect for Robust Hydrogen Evolution Catalysis in Alkaline Media

Designing and synthesizing advanced electrocatalysts with superior intrinsic activity toward hydrogen evolution reaction (HER) in alkaline media is critical for the hydrogen economy. Herein, a novel Ir@Rhene heterojunction electrocatalyst is synthesized via epitaxially confining ultrasmall and low-coordinate Ir nanoclusters on the ultrathin Rh metallene accompanying the formation of Ir/IrO2 Janus nanoparticles. The as-prepared heterojunctions display outstanding alkaline HER activity, with an overpotential of only 17 mV at 10 mA cm-2 and an ultralow Tafel slope of 14.7 mV dec-1 . Both structural characterizations and theoretical calculations demonstrate that the Ir@Rhene heterointerfaces induce charge density redistribution, resulting in the increment of the electron density around the O atoms in the IrO2 site and thus delivering much lower water dissociation energy. In addition, the dual-site synergetic effects between IrO2 and Ir/Rh interface trigger and improve the interfacial hydrogen spillover, thereby subtly avoiding the steric blocking of the active site and eventually accelerating the alkaline HER kinetics.

Dimension Engineering in Noble-Metal-Based Electrocatalysts for Water Splitting

Dimension engineering plays a critical role in determining the electrocatalytic performance of catalysts towards water electrolysis since it is highly sensitive to the surface and interface properties. Bearing these considerations into mind, intensive efforts have been devoted to the rational dimension design and engineering, and many advanced nanocatalysts with multidimensions have been successfully fabricated. Aiming to provide more guidance for the fabrication of highly efficient noble-metal-based electrocatalysts, this review has focused on the recent progress in dimension engineering of noble-metal-based electrocatalysts towards water splitting, including the advanced engineering strategies, the application of noble-metal-based electrocatalysts with distinctive geometric structure from 0D to 1D, 2D, 3D, and multidimensions. In addition, the perspective insights and challenges of the dimension engineering in the noble-metal-based electrocatalysts is also systematically discussed.

Phase Transformation from Amorphous RuSx to Ru-RuS2 Hybrid Nanostructure for Efficient Water Splitting in Alkaline Media

Ruthenium (Ru)-based materials, as a class of efficient hydrogen evolution reaction (HER) catalysts, play an important role in hydrogen generation by electrolysis of water in an alkaline solution for clean hydrogen energy. Hybrid nanostructure (HN) materials, which include two or more components with distinct functionality, show better performance than their individual materials, since HN materials can potentially integrate their advantages and overcome the weaknesses. However, it remains a challenge to construct Ru-based HN materials with desired crystal phases for enhanced HER performances. Herein, a series of new Ru-based HN materials (t-Ru-RuS₂, S-Ru-RuS₂, and T-Ru-RuS₂) through phase engineering of nanomaterials (PEN) and chemical transformation are designed to achieve highly efficient HER properties. Owing to the plentiful formation of heterojunctions and amorphous/crystalline interfaces, the t-Ru-RuS₂ HN delivers the most outstanding overpotential of 16 mV and owns a small Tafel slope of 29 mV dec^-1 at a current density of 10 mA cm^-2, which exceeds commercial Pt/C catalysts (34 mV, 38 mV dec^-1). This work shows a new insight for HN and provides alternative opportunities in designing advanced electrocatalysts with low cost for HER in the hydrogen economy.

Ordered micropattern arrays fabricated by lung-derived dECM hydrogels for chemotherapeutic drug screening

AIMS

This study aims to evaluate ECM-coated micropattern arrays derived from decellularization of native porcine lungs as a novel three-dimensional cell culture platform.

METHODS

ECM derived from decellularization of native porcine lungs was exploited to prepare hydrogels. Then, dECM-coated micropattern arrays were fabricated at four different diameters (50, 100, 150 and 200 ​μm) using polydimethylsiloxane (PDMS). Two lung cancer cell lines, A549 and H1299, were tested on a dECM-coated micropattern array as a novel culture platform for cell adhesion, distribution, proliferation, viability, phenotype expression, and drug screening to evaluate the cytotoxicity of paclitaxel, doxorubicin and cisplatin.

RESULTS

The ECM derived from decellularization of native porcine lungs supported cell adhesion, distribution, viability and proliferation better than collagen I and Matrigel as the coated matrix on the surface. Moreover, the optimal diameter of the micropattern arrays was 100-150 ​μm, as determined by measuring the morphology, viability, proliferation and phenotype of the cancer cell spheroids. Cell spheroids of A549 and H1299 on dECM-coated micropattern arrays showed chemoresistance to anticancer drugs compared to that of the monolayer. The different distributions of HIF-1α, MCL-1 (in the center) and Ki-67 and MRP2 (in the periphery) of the spheroids demonstrated the good establishment of basal-lateral polarity and explained the chemoresistance phenomenon of spheroids.

CONCLUSIONS

This novel three-dimensional cell culture platform is stable and reliable for anticancer drug testing. Drug screening in dECM-coated micropattern arrays provides a powerful alternative to existing methods for drug testing and metabolic profiling in the drug discovery process.

Superassembly of Surface-Enriched Ru Nanoclusters from Trapping-Bonding Strategy for Efficient Hydrogen Evolution

Hydrogen evolution reaction (HER) through water splitting is a potential technology to realize the sustainable production of hydrogen, yet the tardy water dissociation and costly Pt-based catalysts inhibit its development. Here, a trapping-bonding strategy is proposed to realize the superassembly of surface-enriched Ru nanoclusters on a phytic acid modified nitrogen-doped carbon framework (denoted as NCPO-Ru NCs). The modified framework has a high affinity to metal cations and can trap plenty of Ru ions. The trapped Ru ions are mainly distributed on the surface of the framework and can form Ru nanoclusters at 50 °C with the synergistic effect of vacancies and phosphate groups. By adjusting the content of phytic acid, surface-enriched Ru nanoclusters with adjustable distribution and densities can be obtained. Benefiting from the adequate exposure of the active sites and dense distribution of ultrasmall Ru nanoclusters, the obtained NCPO-Ru NCs catalyst can effectively drive HER in alkaline electrolytes and show an activity (at overpotential of 50 mV) about 14.3 and 9.6 times higher than that of commercial Ru/C and Pt/C catalysts, respectively. Furthermore, the great performance in solar to hydrogen generation through water splitting provides more flexibility for wide applications of NCPO-Ru NCs.

Ultrafine Ru nanoclusters supported on N/S doped macroporous carbon spheres for efficient hydrogen evolution reaction

The construction of highly-active and stable electrocatalysts for the hydrogen evolution reaction (HER) is significant for efficient water splitting processes. Herein, we develop an efficient HER catalyst of ultrafine Ru nanoclusters supported on a N/S doped macroporous hollow carbon sphere (Ru/H-S,N-C). The N/S co-doping strategy not only facilitates the reduction of the Ru nanocluster sizes, but also regulates the electronic structure of metallic Ru, improving the HER activity of the metallic Ru catalyst. Due to the structural advantages of N/S-doped macroporous carbon spheres that provide a fast mass transfer process and the high intrinsic activity of Ru nanoclusters, the optimized Ru/H-S,N-C catalyst exhibits excellent HER performance in alkaline medium, with a low overpotential of 32 mV to reach 10 mA cm-2, fast HER kinetics (a Tafel slope of 24 mV dec-1) and excellent durability, superior to the performances of the Ru/H-N-C sample and commercial Pt/C catalyst. Our work offers some guidance on the design of efficient Ru-based electrocatalysts.

Engineering Ruthenium-Based Electrocatalysts for Effective Hydrogen Evolution Reaction

The investigation of highly effective, durable, and cost-effective electrocatalysts for the hydrogen evolution reaction (HER) is a prerequisite for the upcoming hydrogen energy society. To establish a new hydrogen energy system and gradually replace the traditional fossil-based energy, electrochemical water-splitting is considered the most promising, environmentally friendly, and efficient way to produce pure hydrogen. Compared with the commonly used platinum (Pt)-based catalysts, ruthenium (Ru) is expected to be a good alternative because of its similar hydrogen bonding energy, lower water decomposition barrier, and considerably lower price. Analyzing and revealing the HER mechanisms, as well as identifying a rational design of Ru-based HER catalysts with desirable activity and stability is indispensable. In this review, the research progress on HER electrocatalysts and the relevant describing parameters for HER performance are briefly introduced. Moreover, four major strategies to improve the performance of Ru-based electrocatalysts, including electronic effect modulation, support engineering, structure design, and maximum utilization (single atom) are discussed. Finally, the challenges, solutions and prospects are highlighted to prompt the practical applications of Ru-based electrocatalysts for HER.

Unconventional-Phase Crystalline Materials Constructed from Multiscale Building Blocks

Crystal phase, an intrinsic characteristic of crystalline materials, is one of the key parameters to determine their physicochemical properties. Recently, great progress has been made in the synthesis of nanomaterials with unconventional phases that are different from their thermodynamically stable bulk counterparts via various synthetic methods. A nanocrystalline material can also be viewed as an assembly of atoms with long-range order. When larger entities, such as nanoclusters, nanoparticles, and microparticles, are used as building blocks, supercrystalline materials with rich phases are obtained, some of which even have no analogues in the atomic and molecular crystals. The unconventional phases of nanocrystalline and supercrystalline materials endow them with distinctive properties as compared to their conventional counterparts. This Review highlights the state-of-the-art progress of nanocrystalline and supercrystalline materials with unconventional phases constructed from multiscale building blocks, including atoms, nanoclusters, spherical and anisotropic nanoparticles, and microparticles. Emerging strategies for engineering their crystal phases are introduced, with highlights on the governing parameters that are essential for the formation of unconventional phases. Phase-dependent properties and applications of nanocrystalline and supercrystalline materials are summarized. Finally, major challenges and opportunities in future research directions are proposed.

Benchmarking Phases of Ruthenium Dichalcogenides for Electrocatalysis of Hydrogen Evolution: Theoretical and Experimental Insights

The hydrogen evolution reaction (HER) is a significant cathode step in electrochemical devices, especially in water splitting, but developing efficient HER catalysts remains a great challenge. Herein, comprehensive density functional theory calculations are presented to explore the intrinsic HER behaviors of a series of ruthenium dichalcogenide crystals (RuX₂ , X = S, Se, Te). In addition, a simple and easily scaled production strategy is proposed to synthesize RuX₂ nanoparticles uniformly deposited on carbon nanotubes. Consistent with theoretical predictions, the RuX₂ catalysts exhibit impressive HER catalytic behavior. In particular, marcasite-type RuTe₂ (RuTe₂ -M) achieves Pt-like activity (35.7 mV at 10 mA cm^-2 ) in an acidic electrolyte, and pyrite-type RuSe₂ presents outstanding HER performance in an alkaline media (29.5 mV at 10 mA cm^-2 ), even superior to that of commercial Pt/C. More importantly, a RuTe₂ -M-based proton exchange membrane (PEM) electrolyzer and a RuSe₂ -based anion exchange membrane (AEM) electrolyzer are also carefully assembled, and their outstanding single-cell performance points to them being efficient cathode candidates for use in hydrogen production. This work makes a significant contribution to the exploration of a new class of transition metal dichalcogenides with remarkable activity toward water electrolysis.

Phase Control of Noble Monometallic and Alloy Nanomaterials by Chemical Reduction Methods

In recent years, the phase control of monometallic and alloy nanomaterials has attracted great attention because of the potential to tune the physical and chemical properties of these species. In this Review, an overview of the latest research progress in phase-controlled monometallic and alloy nanomaterials is first given. Then, the phase-controlled synthesis using a chemical reduction method are discussed, and the formation mechanisms of these nanomaterials are specifically highlighted. Lastly, the challenges and future perspectives in this new research field are discussed.

Ru Nanoworms Loaded TiO2 for Their Catalytic Performances toward CO Oxidation

Ruthenium nanocrystals with small size and special morphology are of great interest in various catalytic reactions due to their high activities. However, it is still a great challenge to downsize these nanocatalysts to a sub-nano scale (<2 nm). Herein, we reported a synthesis of ultrasmall size and uniform Ru nanoparticles through a rapid one-pot method. The prepared Ru nanocrystal shows a wormlike shape, in which the diameter is as thin as 1.6 ± 0.3 nm and the length is 13.6 ± 4.4 nm. These Ru nanoworms (NWs) are quite steady during the synthetic process even though the reaction time was further prolonged. We also examined their catalytic activity toward CO oxidation by loading Ru NWs on TiO₂ to form Ru NWs/TiO₂ catalysts. These catalysts exhibit a high activity of 100% CO conversion at 150 °C, which is much lower than the normal Ru NPs/TiO₂ nanostructures. Based on our detailed investigations, we proposed that the small size, special morphology, and TiO₂ support are the keys for their significantly improved catalytic activity. We believed that these reasonable discoveries provide a methodology and opportunity to get highly active catalysts for CO oxidation by a detailed increase in their active sites.

RuRh Bimetallene Nanoring as High-efficiency pH-Universal Catalyst for Hydrogen Evolution Reaction

Electrocatalysis of the hydrogen evolution reaction (HER) is a vital and demanding, yet challenging, task to produce clean energy applications. Here, the RuRh2 bimetallene nanoring with rich structural defects is designed and successfully synthesized by a mixed-solvent strategy, displaying ascendant HER performance with high mass activity at -0.05 and -0.07 V, separately higher than that of the commercial Pt catalyst. Also, it maintains steady hydrogen bubble evolution even after 30 000 potential cycles in acid media. Furthermore, the RuRh2 bimetallene nanoring shows an outstanding activity in both alkaline and neutral media, outperforming that of Pt catalysts and other reported HER catalysts. A combination of atomic-scale structure observation and density functional theory calculations demonstrates that both the grain boundaries and symmetry breaking of RuRh2 bimetallene cannot only weaken the adsorption strength of atomic hydrogen, but also facilitate the transfer of electrons and the adsorption of reactants, further boosting the HER electrocatalytic performance in all pH values.

Growth of Highly Active Amorphous RuCu Nanosheets on Cu Nanotubes for the Hydrogen Evolution Reaction in Wide pH Values

Rational design of low-cost, highly efficient, and stable electrocatalysts for the hydrogen evolution reaction (HER) has attracted wide attention. Herein, 3D RuCu nanocrystals (NCs) are successfully synthesized by a facile wet chemistry method, in which amorphous RuCu nanosheets are directly grown on crystalline Cu nanotubes (NTs). Importantly, the obtained 3D RuCu NCs only need 18 and 73 mV to deliver the current density of 10 mA cm^-2 for HER in alkaline and neutral media, respectively. Density functional theory calculations and experiments reveal that the Ru sites on the surface of amorphous nanosheets are the highly active centers for HER. Moreover, this catalyst can expose more surface area for water splitting compared to pure nanosheets because the unique 3D structure can effectively prevent the aggregation of nanosheets. Meanwhile, the interface between amorphous nanosheets and crystalline NTs is essential to boost the HER performance because the amorphous phase with many unsaturated bonds can facilitate adsorption of reactants and crystalline Cu with superior conductivity can promote the transfer of electrons. This work provides a facile method to prepare an original 3D Ru-based electrocatalyst with highly active HER performance in wide pH values.

Plasmonic Metallic Heteromeric Nanostructures

Binary, ternary, and other high-order plasmonic heteromers possess remarkable physical and chemical properties, enabling them to be used in numerous applications. The seed-mediated approach is one of the most promising and versatile routes to produce plasmonic heteromers. Selective growth of one or multiple domains on desired sites of noble metal, semiconductor, or magnetic seeds would form desired heteromeric nanostructures with multiple functionalities and synergistic effects. In this work, the challenges for the synthetic approaches are discussed with respect to tuning the thermodynamics, as well as the kinetic properties (e.g., pH, temperature, injection rate, among others). Then, plasmonic heteromers with their structure advantages displaying unique activities compared to other hybrid nanostructures (e.g., core-shell, alloy) are highlighted. Some of the main most recent applications of plasmonic heteromers are also presented. Finally, perspectives for further exploitation of plasmonic heteromers are demonstrated. The goal of this work is to provide the current know-how on the synthesis routes of plasmonic heteromers in a summarized manner, so as to achieve a better understanding of the resulting properties and to gain an improved control of their performances and extend their breadth of applications.

Catalytic Nanoframes and Beyond

The ever-increasing need for the production and expenditure of sustainable energy is a result of the astonishing rate of consumption of fossil fuels and the accompanying environmental problems. Emphasis is being directed to the generation of sustainable energy by the fuel cell and water splitting technologies. Accordingly, the development of highly efficient electrocatalysts has attracted significant interest, as the fuel cell and water splitting technologies are critically dependent on their performance. Among numerous catalyst designs under investigation, nanoframe catalysts have an intrinsically large surface area per volume and a tunable composition, which impacts the number of catalytically active sites and their intrinsic catalytic activity, respectively. Nevertheless, the structural integrity of the nanoframe during electrochemical operation is an ongoing concern. Some significant advances in the field of nanoframe catalysts have been recently accomplished, specifically geared to resolving the catalytic stability concerns and significantly boosting the intrinsic catalytic activity of the active sites. Herein, general synthetic concepts of nanoframe structures and their structure-dependent catalytic performance are summarized, along with recent notable advances in this field. A discussion on the remaining challenges and future directions, addressing the limitations of nanoframe catalysts, are also provided.

Recent Studies on Multifunctional Electrocatalysts for Fuel Cell by Various Nanomaterials

Based on nanotechnology, nanocomposites are synthesized using nanoparticles (NP), which have some advantages in terms of multifunctional, economic, and environmental factors. In this review, we discuss the inorganic applications as well as catalytic applications of NPs. Recently, structural defects, heteroatomic doping, and heterostructures of such efficient ideal catalysts and their application as multifunctional catalysts for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in water splitting. It has been verified that the catalysts used in oxygen reduction reaction and OER can be used effectively in metal/air batteries. Moreover, it has been reported that high-efficiency catalysts are required to implement urea oxidation reaction (UOR), which involves a six-electron reaction, as an electrochemical reaction. We expect that this review can be applied to sustainable and diverse electrochemistry fields.

One-Pot Self-Templated Growth of Gold Nanoframes for Enhanced Surface-Enhanced Raman Scattering Performance

As one of the representative metallic hollow nanostructures, Au nanoframes have shown fascinating properties such as strong localized surface plasmon resonance associated with emerging applications such as surface-enhanced Raman scattering (SERS) sensors. In this study, for the first time, a facile one-pot synthetic approach for hollow Au nanoframes is demonstrated by directly etching Au nanoplates, that is, the so-called self-templates. A novel growth mechanism has been revealed that involves a synergistic function of Ag and Br ions. The presence of Ag⁺ leads to the observation of self-limiting Au film thickness, whereas Au{111} facets are preferentially attacked by the presence of Br^- in the reaction ambient. More importantly, graphene is introduced to prevent/minimize aggregation during the formation of Au nanoframes. The combined simulation and experimental studies show that the hybrid platform made of graphene/Au nanoframes is capable of detecting analytes at concentration levels down to 10^-9 M by using the SERS technique.

Phase engineering of nanomaterials

Phase has emerged as an important structural parameter - in addition to composition, morphology, architecture, facet, size and dimensionality - that determines the properties and functionalities of nanomaterials. In particular, unconventional phases in nanomaterials that are unattainable in the bulk state can potentially endow nanomaterials with intriguing properties and innovative applications. Great progress has been made in the phase engineering of nanomaterials (PEN), including synthesis of nanomaterials with unconventional phases and phase transformation of nanomaterials. This Review provides an overview on the recent progress in PEN. We discuss various strategies used to synthesize nanomaterials with unconventional phases and induce phase transformation of nanomaterials, by taking noble metals and layered transition metal dichalcogenides as typical examples. Moreover, we also highlight recent advances in the preparation of amorphous nanomaterials, amorphous-crystalline and crystal phase-based hetero-nanostructures. We also provide personal perspectives on challenges and opportunities in this emerging field, including exploration of phase-dependent properties and applications, rational design of phase-based heterostructures and extension of the concept of phase engineering to a wider range of materials.

Phosphorus-triggered synergy of phase transformation and chalcogenide vacancy migration in cobalt sulfide for an efficient oxygen evolution reaction

Introduction of surface defects and phase control engineering in the electrocatalytic system of overall water splitting has played a crucial role in significantly enhancing its electrocatalytic activity toward the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER) in water splitting, but the relationship between structure and electrocatalysis is still elusive. Herein, we report a solid-liquid method to induce surface reorganization (formation of a chalcogenide layer with rich chalcogenide vacancies) and phase transformation (Co₉S₈-to-Co₃S₄) simultaneously on cobalt chalcogenide. Featuring a uniform 2D morphology and the in situ formation of sulfur (S) vacancies, in a 0.1 M KOH solution, it exhibits a low overpotential of 288 mV vs. RHE at 10 mA cm^-2, a low Tafel slope of 43.4 mV dec^-1, and strong cycling stability (35 h), outperforming commercial RuO₂ and most reported OER electrocatalysts. In addition, we also investigate the OER activity of the Co-S-P electrode in 1.0 M KOH solutions. Co_0.37S_0.38P_0.02 NSs only need 257 mV to reach a current density of 10 mA cm^-2. Meanwhile, the Tafel slope of Co_0.37S_0.38P_0.02 NSs (44.0 mV dec^-1) is lower than those of other recently reported electrocatalysts. Also, it shows high HER electrocatalytic activity in alkaline and acidic solutions. Finally, the Co_0.37S_0.38P_0.02 electrode is used as a cathode and anode simultaneously for overall water splitting, which merely requires a cell voltage of 1.59 V at 10 mA cm^-2 with excellent stability (40 h).

A facile synthesis of Ru/N–C as an efficient and cost-effective electrocatalyst for hydrogen evolution

This work provides a HER catalyst synthesis strategy with performance comparable to commercial Pt/C at a cost of only 0.6%.

Synthesis of PdM (M = Zn, Cd, ZnCd) Nanosheets with an Unconventional Face-Centered Tetragonal Phase as Highly Efficient Electrocatalysts for Ethanol Oxidation

Recently, crystal-phase engineering has been emerging as a promising strategy to tune the physicochemical properties of noble metal catalysts and further improve their catalytic performance. However, the synthesis of noble metal catalysts with an unconventional crystal phase as well as desired composition and morphology still remains a great challenge. Herein, a series of PdM (M = Zn, Cd, ZnCd) nanosheets (NSs) with thickness less than 5 nm have been synthesized via a facile one-pot wet-chemical method. In particular, different from the conventional face-centered cubic (fcc) phase, PdM NSs possess an unconventional face-centered tetragonal (fct) phase. As a proof-of-concept application, the fct PdZn NSs exhibit significantly enhanced mass activity and stability in ethanol oxidation reaction, compared to the pure Pd NSs and commercial Pd black catalyst.

Ru Octahedral Nanocrystals with a Face-Centered Cubic Structure, {111} Facets, Thermal Stability up to 400 °C, and Enhanced Catalytic Activity

Ruthenium nanocrystals with both a face-centered cubic ( fcc) structure and well-controlled facets are attractive catalytic materials for various reactions. Here we report a simple method for the synthesis of Ru octahedral nanocrystals with an fcc structure and an edge length of 9 nm. The success of this synthesis relies on the use of 4.5 nm Rh cubes as seeds to facilitate the heterogeneous nucleation and overgrowth of Ru atoms. We choose Rh because it can resist oxidative etching under the harsh conditions for Ru overgrowth, it can be readily prepared as nanocubes with edge lengths less than 5 nm, and its atoms have a size close to that of Ru atoms. During the seed-mediated growth, the atomic packing of Ru overlayers follows an fcc lattice, in contrast to the conventional hexagonal close-packed ( hcp) lattice associated with bulk Ru. The final product takes an octahedral shape, with the surface enclosed by {111} facets. Our in situ measurements suggest that both the octahedral shape and the fcc crystal structure can be well preserved up to 400 °C, which is more than 100 °C higher than what was reported for Ru octahedral nanocages. When utilized as catalysts, the Ru octahedral nanocrystals exhibited 4.4-fold enhancement in terms of specific activity toward oxygen evolution relative to hcp-Ru nanoparticles. We also demonstrate that Ru{111} facets are more active than Ru{100} facets in catalyzing the oxygen evolution reaction. Altogether, this work offers an effective method for the synthesis of Ru nanocrystals with an fcc structure and well-defined {111} facets, as well as enhanced thermal stability and catalytic activity. We believe these nanocrystals will find use in various catalytic applications.

Seed-assisted synthesis of fcc Ru–Cu bimetallic nanostructures and their catalytic properties for the hydrogen evolution reaction

Adjusting the chemical composition and/or crystal structures is an important approach to tune the activity of catalysts.