Sensitive and Reproducible Immunoassay of Multiple Mycotoxins Using Surface-Enhanced Raman Scattering Mapping on 3D Plasmonic Nanopillar Arrays

Low power density, high-efficiency reflective Raman system for polymer SERS substrates

Surface-enhanced Raman spectroscopy (SERS) is a powerful measurement method in the chemical analysis field. It is much superior to bulk Raman owing to the enhancement of signal sensitivity from the SERS substrate. Nevertheless, the delicate SERS substrates are overpriced, which results in the difficulty of universal measurements. Accordingly, opting for a substrate made of polymer material based on the nanoimprint technique shows great potential for low-cost and high-performance SERS substrates. However, due to its low heat conductivity, the polymer's thermal properties may cause heat to concentrate on the incident spot and damage the nanostructures or analytes. In this article, we proposed a novel design of the Reflective Raman (RR) system to reduce the input power density and maintain high collection efficiency at the same time. The proposed RR system was directly compared with a traditional micro Raman (μ-Raman) system and demonstrated its outstanding performance for low damage threshold analytes and SERS substrates.

SERS-based microdevices for use as in vitro diagnostic biosensors

Advances in surface-enhanced Raman scattering (SERS) detection have helped to overcome the limitations of traditional in vitro diagnostic methods, such as fluorescence and chemiluminescence, owing to its high sensitivity and multiplex detection capability. However, for the implementation of SERS detection technology in disease diagnosis, a SERS-based assay platform capable of analyzing clinical samples is essential. Moreover, infectious diseases like COVID-19 require the development of point-of-care (POC) diagnostic technologies that can rapidly and accurately determine infection status. As an effective assay platform, SERS-based bioassays utilize SERS nanotags labeled with protein or DNA receptors on Au or Ag nanoparticles, serving as highly sensitive optical probes. Additionally, a microdevice is necessary as an interface between the target biomolecules and SERS nanotags. This review aims to introduce various microdevices developed for SERS detection, available for POC diagnostics, including LFA strips, microfluidic chips, and microarray chips. Furthermore, the article presents research findings reported in the last 20 years for the SERS-based bioassay of various diseases, such as cancer, cardiovascular diseases, and infectious diseases. Finally, the prospects of SERS bioassays are discussed concerning the integration of SERS-based microdevices and portable Raman readers into POC systems, along with the utilization of artificial intelligence technology.

Advancing Mycotoxin Detection in Food and Feed: Novel Insights from Surface-Enhanced Raman Spectroscopy (SERS)

The implementation of low-cost and rapid technologies for the on-site detection of mycotoxin-contaminated crops is a promising solution to address the growing concerns of the agri-food industry. Recently, there have been significant developments in surface-enhanced Raman spectroscopy (SERS) for the direct detection of mycotoxins in food and feed. This review provides an overview of the most recent advancements in the utilization of SERS through the successful fabrication of novel nanostructured materials. Various bottom-up and top-down approaches have demonstrated their potential in improving sensitivity, while many applications exploit the immobilization of recognition elements and molecular imprinted polymers (MIPs) to enhance specificity and reproducibility in complex matrices. Therefore, the design and fabrication of nanomaterials is of utmost importance and are presented herein. This paper uncovers that limited studies establish detection limits or conduct validation using naturally contaminated samples. One decade on, SERS is still lacking significant progress and there is a disconnect between the technology, the European regulatory limits, and the intended end-user. Ongoing challenges and potential solutions are discussed including nanofabrication, molecular binders, and data analytics. Recommendations to assay design, portability, and substrate stability are made to help improve the potential and feasibility of SERS for future on-site agri-food applications.

A strategy to enhance SERS detection sensitivity through the use of SiO2 beads in a 1536-well plate

The development of rapid and accurate assays is crucial to prevent the rapid spread of highly contagious respiratory infections such as coronavirus (COVID-19). Here, we developed a surface-enhanced Raman scattering (SERS)-enzyme-linked immunosorbent assay (ELISA) method that allows for the screening of multiple patient samples with high sensitivity on a 1536-well plate. As the well number on the ELISA well plate increases from 96 to 1536, the throughput of the assay increases but the sensitivity decreases due to the low number of biomarkers and the increase in non-specific binding species. To address this problem, silica (SiO2) beads were used to increase the surface-to-volume ratio and the loading density of biomarkers, thereby enhancing sensitivity. Using a three-dimensional gold nanoparticle (AuNP)@SiO2 SERS assay platform on a 1536-well plate, an immunoassay for the nucleocapsid protein biomarker of SARS-CoV-2 was performed and the limit of detection (LoD) decreased from 273 to 7.83 PFU/mL compared to using a two-dimensional assay platform with AuNPs. The proposed AuNPs@SiO2 SERS immunoassay (SERS-IA) platform is expected to dramatically decrease the false-negative diagnostic rate of the currently used lateral flow assay (LFA) or ELISA by enabling the positive diagnosis of patients with low virus concentrations.

A review on current progress of Raman-based techniques in food safety: From normal Raman spectroscopy to SESORS

Frequently occurrence of food safety incidents has induced global concern over food safety. To ensure food quality and safety, an increasing number of rapid and sensitive analytical methods have been developed for analysis of all kinds of food composition and contaminants. As one of the high-profile analytical techniques, Raman spectroscopy has been widely applied in food analysis with simple, rapid, sensitive, and nondestructive detection performance. Research on Raman techniques is a direction of great interest to many fields, especially in food safety. Hence, it is crucial to gain insight into recent advances on the use of Raman-based techniques in food safety applications. In this review, we introduce Raman techniques from normal Raman spectroscopy to developed ones (e.g., surface enhanced Raman scattering (SERS), spatially offset Raman spectroscopy (SORS), surface-enhanced spatially offset Raman spectroscopy (SESORS)), in view of their history and development, principles, design, and applications. In addition, future challenges and trends of these techniques are discussed regarding to food safety.

SERS-ELISA using silica-encapsulated Au core-satellite nanotags for sensitive detection of SARS-CoV-2

The sensitive detection of viruses is key to preventing the spread of infectious diseases. In this study, we develop a silica-encapsulated Au core-satellite (CS@SiO₂) nanotag, which produces a strong and reproducible surface-enhanced Raman scattering (SERS) signal. The combination of SERS from the CS@SiO₂ nanotags with enzyme-linked immunosorbent assay (ELISA) achieves a highly sensitive detection of SARS-CoV-2. The CS@SiO₂ nanotag is constructed by assembling 32 nm Au nanoparticles (AuNPs) on a 75 nm AuNP. Then the core-satellite particles are encapsulated with SiO₂ for facile surface modification and stability. The SERS-ELISA technique using the CS@SiO₂ nanotags provides a great sensitivity, yielding a detection limit of 8.81 PFU mL-1, which is 10 times better than conventional ELISA and 100 times better than lateral flow assay strip method. SERS-ELISA is applied to 30 SARS-CoV-2 clinical samples and achieved 100% and 55% sensitivities for 15 and 9 positive samples with cycle thresholds < 30 and > 30, respectively. This new CS@SiO₂-SERS-ELISA method is an innovative technique that can significantly reduce the false-negative diagnostic rate for SARS-CoV-2 and thereby contribute to overcoming the current pandemic crisis.

A robust SERS calibration using a pseudo-internal intensity reference

Surface-enhanced Raman scattering (SERS) with high molecular sensitivity and specificity is a powerful nondestructive analytical tool. Since its discovery, SERS measurements have suffered from the vulnerability of calibration curve, which makes quantification analysis a great challenge. In this work, we report a robust calibration method by introducing a referenced measurement as the intensity standard. This intensity reference not only has the advantages of the internal standard method such as reflecting the SERS substrate enhancement, but also avoids the introduction of competing adsorption between target molecules and the internal standard. Based on the normalized calibration curve, the magnitude of the R6G concentration can be well evaluated from 10^-7 M to 10^-12 M. Furthermore, we demonstrate that this pseudo-internal standard method can also work well using a different type of molecule as the reference. This SERS calibration method would be beneficial for the development of quantitative SERS analysis.

Plasmonic Polarization Rotation in SERS Spectroscopy

Surface-enhanced Raman optical activity (SEROA) has been extensively investigated due to its ability to directly probe stereochemistry and molecular structure. However, most works have focused on the Raman optical activity (ROA) effect arising from the chirality of the molecules on isotropic surfaces. Here, we propose a strategy for achieving a similar effect: i.e., a surface-enhanced Raman polarization rotation effect arising from the coupling of optically inactive molecules with the chiral plasmonic response of metasurfaces. This effect is due to the optically active response of metallic nanostructures and their interaction with molecules, which could extend the ROA potential to inactive molecules and be used to enhance the sensibility performances of surface-enhanced Raman spectroscopy. More importantly, this technique does not suffer from the heating issue present in traditional plasmonic-enhanced ROA techniques, as it does not rely on the chirality of the molecules.

Direct Thermal Growth of Gold Nanopearls on 3D Interweaved Hydrophobic Fibers as Ultrasensitive Portable SERS Substrates for Clinical Applications

Surface-enhanced Raman spectroscopy (SERS)-based biosensors have attracted much attention for their label-free detection, ultrahigh sensitivity, and unique molecular fingerprinting. In this study, a wafer-scale, ultrasensitive, highly uniform, paper-based, portable SERS detection platform featuring abundant and dense gold nanopearls with narrow gap distances, are prepared and deposited directly onto ultralow-surface-energy fluorosilane-modified cellulose fibers through simple thermal evaporation by delicately manipulating the atom diffusion behavior. The as-designed paper-based SERS substrate exhibits an extremely high Raman enhancement factor (3.9 × 10¹¹ ), detectability at sub-femtomolar concentrations (single-molecule level) and great signal reproductivity (relative standard deviation: 3.97%), even when operated with a portable 785-nm Raman spectrometer. This system is used for fingerprinting identification of 12 diverse analytes, including clinical medicines (cefazolin, chloramphenicol, levetiracetam, nicotine), pesticides (thiram, paraquat, carbaryl, chlorpyrifos), environmental carcinogens (benzo[a]pyrene, benzo[g,h,i]perylene), and illegal drugs (methamphetamine, mephedrone). The lowest detection concentrations reach the sub-ppb level, highlighted by a low of 16.2 ppq for nicotine. This system appears suitable for clinical applications in, for example, i) therapeutic drug monitoring for individualized medication adjustment and ii) ultra-early diagnosis for pesticide intoxication. Accordingly, such scalable, portable and ultrasensitive fibrous SERS substrates open up new opportunities for practical on-site detection in biofluid analysis, point-of-care diagnostics and precision medicine.

Advances in immunoassay-based strategies for mycotoxin detection in food: From single-mode immunosensors to dual-mode immunosensors

Mycotoxin contamination in foods and other goods has become a broad issue owing to serious toxicity, tremendous threat to public safety, and terrible loss of resources. Herein, it is necessary to develop simple, sensitive, inexpensive, and rapid platforms for the detection of mycotoxins. Currently, the limitation of instrumental and chemical methods cannot be massively applied in practice. Immunoassays are considered one of the best candidates for toxin detection due to their simplicity, rapidness, and cost-effectiveness. Especially, the field of dual-mode immunosensors and corresponding assays is rapidly developing as an advanced and intersected technology. So, this review summarized the types and detection principles of single-mode immunosensors including optical and electrical immunosensors in recent years, then focused on developing dual-mode immunosensors including integrated immunosensors and combined immunosensors to detect mycotoxins, as well as the combination of dual-mode immunosensors with a portable device for point-of-care test. The remaining challenges were discussed with the aim of stimulating future development of dual-mode immunosensors to accelerate the transformation of scientific laboratory technologies into easy-to-operate and rapid detection platforms.

AIEgens: Next Generation Signaling Source for Immunoassays?

Luminogens with aggregation-induced emission (AIEgens) properties have numerous broad applications in fields of chemical and biological analyses due to their exceptional photostability, excellent signal reliability, high quantum yield, and large Stokes' shift. In particular, AIEgens also bring new blood for immunoassay. Since publication of the first 2004 paper, AIEgens-based immunoassays have received significant attention because of their high sensitivity, specificity, accuracy, and reliability. However, until now, there have been no comprehensive literature reviews focused on the evolving field of AIEgens-based immunoassays. Thus, we have extensively reviewed AIEgens-based immunoassays from their basic working principles to specific applications. We focus on several fundamental elements of AIEgens-based immunoassays, including the typical structures of AIEgens, emission mechanism of AIEgens probes, function of AIEgens in immunoassays, and platform of AIEgens-based immunoassays. Then, the representative applications of AIEgens-based immunoassays in food safety, medical diagnostics, and environmental monitoring are explored. Thus, proposals on how to further improve the AIEgens-based immunoassay performance are also discussed, as well as future challenges and perspectives, aiming to provide brief and valid guidelines for choosing suitable AIEgens-based immunoassays according to specific application requirements.

Recent advances in simultaneous detection strategies for multi-mycotoxins in foods

Mycotoxin contamination has become a challenge in the field of food safety testing, given the increasing emphasis on food safety in recent years. Mycotoxins are widely distributed, in heavily polluted areas. Food contamination with these toxins is difficult to prevent and control. Mycotoxins, as are small-molecule toxic metabolites produced by several species belonging to the genera Aspergillus, Fusarium, and Penicillium growing in food. They are considered teratogenic, carcinogenic, and mutagenic to humans and animals. Food systems are often simultaneously contaminated with multiple mycotoxins. Due to the additive or synergistic toxicological effects caused by the co-existence of multiple mycotoxins, their individual detection requires reliable, accurate, and high-throughput techniques. Currently available, methods for the detection of multiple mycotoxins are mainly based on chromatography, spectroscopy (colorimetry, fluorescence, and surface-enhanced Raman scattering), and electrochemistry. This review provides a comprehensive overview of advances in the multiple detection methods of mycotoxins during the recent 5 years. The principles and features of these techniques are described. The practical applications and challenges associated with assays for multiple detection methods of mycotoxins are summarized. The potential for future development and application is discussed in an effort, to provide standards of references for further research.

Application of SERS in the Detection of Fungi, Bacteria and Viruses

In this review, we report the recent advances of SERS in fungi, bacteria, and viruses. Firstly, we briefly introduce the advantage of SERS over fluorescence on virus identification and detection. Secondly, we review the feasibility analysis of Raman/SERS spectrum analysis, identification, and fungal detection on SERS substrates of various nanostructures with a signal amplification mechanism. Thirdly, we focus on SERS spectra for nucleic acid, pathogens for the detection of viruses and bacteria, and furthermore introduce SERS-based microdevices, including SERS-based microfluidic devices, and three-dimensional nanostructured plasmonic substrates.

The evolution of multiplex detection of mycotoxins using immunoassay platform technologies

Mycotoxins present serious threats not only for public health, but also for the economy and environment. The problems become more complex and serious due to co-contamination of multiple hazardous mycotoxins in commodities and environment. To mitigate against this issue, accurate, affordable, and rapid multiplex detection methods are required. This review presents an overview of emerging rapid immuno-based multiplex methods capable of detecting mycotoxins present in agricultural products and feed ingredients published within the past five years. The scientific principles, advantages, disadvantages, and assay performance of these rapid multiplex immunoassays, including lateral flow, fluorescence polarization, chemiluminescence, surface plasmon resonance, surface enhanced Raman scattering, electrochemical sensor, and nanoarray are discussed. From the recent literature landscape, it is predicted that the future trend of the detection methods for multiple mycotoxins will rely on the advance of various sensor technologies, a variety of enhancing and reporting signals based on nanomaterials, rapid and effective sample preparation, and capacity for quantitative analysis.

Magnetic Halloysite Nanotube-Based SERS Biosensor Enhanced with Au@Ag Core-Shell Nanotags for Bisphenol A Determination

Bisphenol A (BPA) has emerged as a contaminant of concern because long-term exposure may affect the human endocrine system. Herein, a novel aptamer sensor based on magnetic separation and surface-enhanced Raman scattering (SERS) is proposed for the extremely sensitive and specific detection of trace BPA. Moreover, the capture unit was prepared by immobilizing thiolated (SH)-BPA aptamer complementary DNA on AuNP-coated magnetic halloysite nanotubes (MNTs@AuNPs), and SH-BPA aptamer-modified Au@4-MBA@Ag core-shell SERS nanotags acted as signal units. By the complementary pairing of the BPA aptamer and the corresponding DNA, MNTs@AuNPs and Au@4-MBA@AgCS were linked together through hybridization-ligation, which acted as the SERS substrate. In the absence of BPA, the constructed aptamer sensor generated electromagnetic enhancement and plasmon coupling to improve the sensitivity of SERS substrates. Owing to the high affinity between BPA and the aptamer, the aptamer probe bound to BPA was separated from the capture unit by an externally-induced magnetic field. Thus, the Raman intensity of the MNTs@AuNP-Ag@AuCS core-satellite assemblies was negatively correlated with the BPA concentration. High sensitivity measurements of BPA might be performed by determining the decline in SERS signal strength together with concentration variations. The proposed aptasensor is a promising biosensing platform for BPA detection.

Dual Gold Nanoparticle/Chemiluminescent Immunoassay for Sensitive Detection of Multiple Analytes

Multiple antibiotics and mycotoxins usually simultaneously exist in foods, which poses a serious threat to human health. How to detect them in one test with high sensitivity and fidelity is challenging. In this study, we develop a dual readout lateral flow immunodetection platform that can quantitatively detect five kinds of antibiotics and five kinds of mycotoxins within one sample. The platform is composed of a chip and a portable readout instrument where gold nanoparticle (AuNP)-based and chemiluminescence immunoassays could be performed to reach a maximum throughput of 220 analytes in one setting. For a rapid screen, qualitative analysis by detecting the color change of the deposited AuNPs on the chip could be realized. For quantitative results, chemiluminescence imaging and analysis can be completed within 15 min. Apart from the high throughput and high efficiency, this platform has a high detection sensitivity. For instance, the limit of detection (LOD) for thiamphenicol (a representative antibiotic) and fumonisins B1 (a representative mycotoxin) is 8 times and 40 times lower than those of the previously reported methods, respectively. Thus, this dual readout immunodetection platform is promising as a universal device for rapid and quantitative detection of multiple analytes with high throughput, high sensitivity, and high fidelity.

Ti3C2Tx MXenes loaded with Au nanoparticle dimers as a surface-enhanced Raman scattering aptasensor for AFB1 detection

Mycotoxin B1 (AFB1) contamination in agricultural products pose a deadlydangertoanimal and human health and its rapid and reliable detection is thus very important. Herein, a ratiometric surface-enhanced Raman scattering (SERS) aptasensor for AFB1 detection was developed, in which 1,2-bis(4-pyridyl) ethylene (BPE) was used to trigger the assembly of Au nanoparticle dimers (AuNP dimers) and form intensive SERS "hot spots", and MXenes nanosheets could load aptamer-modified AuNP dimers due to the hydrogen bonding and the chelation between the phosphate groups of aptamers and the Ti ion of MXenes. With the presence of AFB1 preferentially binding to AFB1 aptamer, AuNP dimers were separated from MXenes nanosheets, leading to a decrease in SERS intensity. Regression analysis in the range from 0.001 to 100 ng·mL^-1 showed the limit of detection (LOD) being 0.6 pg·mL^-1 in standard solution, indicating that the great prospects of the AuNP dimers/MXenes SERS substrate for detecting AFB1.

Plasmonic Metasurfaces for Specific SERS Detection of Shiga Toxins

The interest in the development of nanoscale plasmonic technologies has dramatically increased in recent years. The photonic properties of plasmonic nanopatterns can be controlled and tuned via their size, shape, or the arrangement of their constituents. In this work, we propose a 2D hybrid metallic polymeric nanostructure based on the octupolar framework with enhanced sensing property. We analyze its plasmonic features both numerically and experimentally, demonstrating the higher values of their relevant figures of merit: we estimated a surface-enhanced Raman spectroscopy (SERS) enhancement factor of 9 × 10⁷ and a SPR bulk sensitivity of 430 nm/RIU. In addition, our nanostructure exhibits a dual resonance in the visible and near-infrared region, enabling our system toward multispectral plasmonic analysis. Finally, we illustrate our design engineering strategy as enabled by electron beam lithography by the outstanding performance of a SERS-based biosensor that targets the Shiga toxin 2a, a clinically relevant bacterial toxin. To the best of our knowledge, this is the first time that a SERS fingerprint of this toxin has been evidenced.

A Target-Driven Self-Feedback Paper-Based Photoelectrochemical Sensing Platform for Ultrasensitive Detection of Ochratoxin A with an In2S3/WO3 Heterojunction Structure

Currently, developing versatile, easy-to-operate, and effective signal amplification strategies hold great promise in photoelectrochemical (PEC) biosensing. Herein, an ultrasensitive polyvinylpyrrolidone-treated In₂S₃/WO₃ (In₂S₃-P/WO₃)-functionalized paper-based PEC sensor was established for sensing ochratoxin A (OTA) based on a target-driven self-feedback (TDSF) mechanism enabled by a dual cycling tactic of PEC chemical-chemical (PECCC) redox and exonuclease III (Exo III)-assisted complementary DNA. The In₂S₃-P/WO₃ heterojunction structure with 3D open-structure and regulable topology was initially in situ grown on Au nanoparticle-functionalized cellulose paper, which was served as a universal signal transducer to directly record photocurrent signals without complicated electrode modification, endowing the paper chip with admirable anti-interference ability and unexceptionable photoelectric conversion efficiency. With the assistance of Exo III-assisted cycling process, a trace amount of OTA could trigger substantial signal reporter ascorbic acid (AA) generated by the enzymatic catalysis of alkaline phosphatase, which could effectively provoke the PECCC redox cycling among the tris(2-carboxyethyl)phosphine acid, AA, and ferrocenecarboxylic at the In₂S₃-P/WO₃ photoelectrode, initiating TDSF signal amplification. Based on the TDSF process induced by the Exo III-assisted recycling and PECCC redox cycling strategy, the developed paper-based PEC biosensor realized ultrasensitive determination of OTA with persuasive selectivity, high stability, and excellent reproducibility. It is believed that the proposed paper-based PEC sensing platform exhibited enormous potential for the detection of other targets in bioanalysis and clinical diagnosis.

Density Regulation and Localization of Cell Clusters by Self-Assembled Femtosecond-Laser-Fabricated Micropillar Arrays

Tumor cell clusters of varying sizes and densities have different metastatic potentials. Three-dimensional (3D) patterned structures with rational topographical and mechanical properties are capable of guiding the 3D clustering of tumor cells. In this study, single femtosecond laser pulses were used to fabricate individual high-aspect-ratio micropillars via two-photon polymerization (TPP). By combining this approach with capillary-force self-assembly, complex 3D microstructure patterns were constructed with a high efficiency. The microstructures were able to regulate the formation of cell clusters at different cell seeding densities and direct self-guided 3D assembly of cell clusters of various sizes and densities. Localization of cell clusters was achieved using grid-indexed samples to address individual cell clusters, which holds great promise for in situ cell cluster culture and monitoring and for applications such as RNA sequencing of cell clusters.

Instant Preparation of Ultraclean Gold Nanothorns under Ambient Conditions for SERS Kit-Enabled Mobile Diagnosis

Availability of surface-enhanced Raman scattering (SERS) substrates with good stability, high sensitivity, and a clean surface is crucial for the practical usefulness of the SERS technology in biochemical sensing, especially for point-of-care testing (POCT). Hereby, we develop a "ready-to-use" SERS kit, which requires only 20 s to fabricate ultraclean gold nanothorn (AuNT)-based SERS chips under ambient conditions with simple solution processing steps. By varying the thickness of the pre-coated platinum (Pt) nanolayer, we can control the size and number density of the grown AuNT. Taking advantage of the ultraclean surface of the instantly obtained fresh AuNT, Raman reporter molecules can also be immediately modified, by means of which specific detection of three analytes including H₂O₂, NO₂^-, and ClO^- is realized. Furthermore, we propose the concept of an SERS kit and apply it to smartphone-based Raman analysis for POCT applications. This on-site preparation method solves the long-standing challenges hindering the practical use of SERS substrates, such as complicated fabrication processes, interference of residual surfactants, poor surface stability, and easy contamination. Besides performing SERS analysis conveniently and quickly, this SERS kit-enabled POCT technology can integrate remote data terminals and medical resources, which shows great potential for environmental protection or online-healthcare systems.

Recent advances in immunoassays and biosensors for mycotoxins detection in feedstuffs and foods

Mycotoxins are secondary metabolites produced by fungus. Many mycotoxin species are highly toxic and are frequently found in cereals and feedstuffs. So, powerful detection methods are vital and effective ways to prevent feed contamination. Traditional detection methods can no longer meet the needs of massive, real-time, simple, and fast mycotoxin monitoring. Rapid detection methods based on advanced material and sensor technology are the future trend. In this review, we highlight recent progress of mycotoxin rapid detection strategies in feedstuffs and foods, especially for simultaneous multiplex mycotoxin determination. Immunoassays, biosensors, and the prominent roles of nanomaterials are introduced. The principles of different types of recognition and signal transduction are explained, and the merits and pitfalls of these methods are compared. Furthermore, limitations and challenges of existing rapid sensing strategies and perspectives of future research are discussed.

A Novel Multiplex Mycotoxin Surface-Enhanced Raman Spectroscopy Immunoassay Using Functional Gold Nanotags on a Silica Photonic Crystal Microsphere Biochip

A novel multiplex mycotoxin surface-enhanced Raman spectroscopy (SERS) immunoassay was established for the first time on different artificial antigen-modified silica photonic crystal microspheres (SPCMs), which can be integrated into a biochip array to achieve multiplex detection using corresponding antibody-functionalized gold nanoparticles (AuNPs) as the SERS nanotag. The unique optical structure of SPCMs is helpful to find the detection spots easily, accommodate a large amount of probe molecules, and enhance the Raman signal intensity. Such enhancement was confirmed by the simulation result, showing the electric field enhancing effect in SPCMs with AuNPs being 7 times. A competitive SERS immunoassay was established using antigen-modified SPCMs and mycotoxins to compete for binding antibody-functionalized SERS nanotags, displaying broad linear detection ranges of 0.001-0.1 ng/mL for aflatoxin B₁ (AFB₁), 0.01-10 ng/mL for ochratoxin A (OTA), and 0.001-0.1 ng/mL for zearalenone (ZEN) and low detection limits of 0.82 pg/mL for AFB₁, 1.43 pg/mL for OTA, and 1.00 pg/mL for ZEN. In the spiked cereal samples, recovery rates of the method were measured in the range of 70.35-118.04% for the three mycotoxins, which was in agreement with that of the traditional enzyme-linked immunosorbent assay method. The SERS immunoassay for mycotoxin detection also showed high specificity and good repeatability and reproducibility. The new microsphere-based SERS immunoassay biochip only requires a one-step reaction and overcomes the disadvantages of fluorescence and chemiluminescence background signals. The work paves the way for further developing SERS-based microsphere suspension arrays for new targets.

Monolithic integration of nanorod arrays on microfluidic chips for fast and sensitive one-step immunoassays

Here, we present integrated nanorod arrays on microfluidic chips for fast and sensitive flow-through immunoassays of physiologically relevant macromolecules. Dense arrays of Au nanorods are easily fabricated through one-step oblique angle deposition, which eliminates the requirement of advanced lithography methods. We report the utility of this plasmonic structure to improve the detection limit of the cardiac troponin I (cTnI) assay by over 6 × 105-fold, reaching down to 33.9 fg mL-1 (~1.4 fM), compared with an identical assay on glass substrates. Through monolithic integration with microfluidic elements, the device enables a flow-through assay for quantitative detection of cTnI in the serum with a detection sensitivity of 6.9 pg mL-1 (~0.3 pM) in <6 min, which was 4000 times lower than conventional glass devices. This ultrasensitive detection arises from the large surface area for antibody conjugation and metal-enhanced fluorescent signals through plasmonic nanostructures. Moreover, due to the parallel arrangement of flow paths, simultaneous detection of multiple cancer biomarkers, including prostate-specific antigen and carcinoembryonic antigen, has been fulfilled with increased signal-to-background ratios. Given the high performance of this assay, together with its simple fabrication process that is compatible with standard mass manufacturing techniques, we expect that the prepared integrated nanorod device can bring on-site point-of-care diagnosis closer to reality.

Sensitive Detection of SARS-CoV-2 Using a SERS-Based Aptasensor

We developed a new surface-enhanced Raman scattering (SERS)-based aptasensor platform capable of quantifying severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) lysates with a high sensitivity. In this study, a spike protein deoxyribonucleic acid (DNA) aptamer was used as a receptor, and a self-grown Au nanopopcorn surface was used as a SERS detection substrate for the sensible detection of SARS-CoV-2. A quantitative analysis of the SARS-CoV-2 lysate was performed by monitoring the change in the SERS peak intensity caused by the new binding between the aptamer DNA released from the Au nanopopcorn surface and the spike protein in the SARS-CoV-2 virion. This technique enables detecting SARS-CoV-2 with a limit of detection (LoD) of less than 10 PFU/mL within 15 min. The results of this study demonstrate the possibility of a clinical application that can dramatically improve the detection limit and accuracy of the currently commercialized SARS-CoV-2 immunodiagnostic kit.

Preliminary Validation of a Continuum Model for Dimple Patterns on Polyethylene Naphthalate via Ar Ion Beam Sputtering

This work reports the self-organization of dimple nanostructures on a polyethylene naphthalate (PEN) surface where an Ar ion beam was irradiated at an ion energy of 600 eV. The peak-to-peak roughness and diameter of dimple nanostructures were 29.1~53.4 nm and 63.4~77.6 nm, respectively. The electron energy loss spectrum at the peaks and troughs of dimples showed similar C=C, C=O, and O=CH bonding statuses. In addition, wide-angle X-ray scattering showed that Ar ion beam irradiation did not induce crystallization of the PEN surface. That meant that the self-organization on the PEN surface could be due to the ion-induced surface instability of the amorphous layer and not due to the partial crystallinity differences of the peaks and valleys. A nonlinear continuum model described surface instability due to Ar ion-induced sputtering. The Kuramoto–Sivashinsky model reproduced the dimple morphologies numerically, which was similar to the experimentally observed dimple patterns. This preliminary validation showed the possibility that the continuum equation used for metal and semiconductor surfaces could be applied to polymer surfaces where ion beam sputtering occurred.

Competitive immunosensor for sensitive and optical anti-interference detection of imidacloprid by surface-enhanced Raman scattering

The sensitive detection of pesticides in complex environment is important but still challenging in presence of organic-rich water sample and food matrix. Herein, we reported a nitrile-mediated SERS immunosensor for sensitive and optical anti-interference determination of imidacloprid. Raman tag contained CN bond could provide a sharp characteristic peak in the Raman-silent spectral window (1800 ~ 2800 cm^-1), which could resist the optical noises from the fingerprint region (<1800 cm^-1). Au_core-Ag_shell bimetallic nanocuboid (AuNR@Ag) connected with antigen and Raman tag was used as Raman probe, while Fe₃O₄ magnetic nanoparticle functionalized with anti-imidacloprid antibody was applied as signal enhancer. Owing to the specific recognition ability between antigen and antibody, the competitive system with imidacloprid was formed. Under the optimal condition, the linear relationship was developed in the range of 10-400 nM. Finally, the SERS immunosensor was successfully applied to determine imidacloprid in real samples with recoveries from 96.8% to 100.5%.

Advances in gold nanoparticles for mycotoxin analysis

Mycotoxins are toxic secondary metabolites naturally produced by fungi. They can cause various kinds of acute and chronic diseases in both humans and animals since food usually contains trace amounts of mycotoxins. Thus, it is important to develop a rapid and sensitive technique for mycotoxin detection. Except for the original and classical enzyme-linked immunosorbent assays (ELISA), a series of biosensors has been developed to analyze mycotoxins in food in the last decade with the advantages of rapid analysis, simplicity, portability, reproducibility, stability, accuracy, and low cost. Nanomaterials have been incorporated into biosensors for the purpose of achieving better analytical performance in terms of limit of detection, linear range, analytical stability, low production cost, etc. Gold nanoparticles (AuNPs) are one of the most extensively studied and commonly used nanomaterials, which can be employed as an immobilization carrier, signal amplifier, mediator and mimic enzyme label. This paper aims to present an extensive overview of the recent progress in AuNPs in mycotoxin detection through ELISA and biosensors. The details of the detection methods and their application principles are described, and current challenges and future prospects are discussed as well.

Detection of Mycotoxins in Food Using Surface-Enhanced Raman Spectroscopy: A Review

Mycotoxins are toxic metabolites produced by fungi that contaminate many important crops worldwide. Humans are commonly exposed to mycotoxins through the consumption of contaminated food products. Mycotoxin contamination is unpredictable and unavoidable; it occurs at any point in the food production system under favorable conditions, and they cannot be destroyed by common heat treatments, because of their high thermal stability. Early and fast detection plays an essential role in this unique challenge to monitor the presence of these compounds in the food chain. Surface-enhanced Raman spectroscopy (SERS) is an advanced spectroscopic technique that integrates Raman spectroscopic molecular fingerprinting and enhanced sensitivity based on nanotechnology to meet the requirement of sensitivity and selectivity, but that can also be performed in a cost-effective and straightforward manner. This Review focuses on the SERS methodologies applied to date for qualitative and quantitative analysis of mycotoxins based on a variety of SERS substrates, as well as our perspectives on current limitations and future trends for applying this technique to mycotoxin analyses.

Recent progress in mycotoxins detection based on surface-enhanced Raman spectroscopy

Mycotoxins are toxic compounds naturally produced by certain types of fungi. The contamination of mycotoxins can occur on numerous foodstuffs, including cereals, nuts, fruits, and spices, and pose a major threat to humans and animals by causing acute and chronic toxic effects. In this regard, reliable techniques for accurate and sensitive detection of mycotoxins in agricultural products and food samples are urgently needed. As an advanced analytical tool, surface-enhanced Raman spectroscopy (SERS), presents several major advantages, such as ultrahigh sensitivity, rapid detection, fingerprint-type information, and miniaturized equipment. Benefiting from these merits, rapid growth has been observed under the topic of SERS-based mycotoxin detection. This review provides a comprehensive overview of the recent achievements in this area. The progress of SERS-based label-free detection, aptasensor, and immunosensor, as well as SERS combined with other techniques, has been summarized, and in-depth discussion of the remaining challenges has been provided, in order to inspire future development of translating the techniques invented in scientific laboratories into easy-to-operate analytic platforms for rapid detection of mycotoxins.

Multiplex surface-enhanced Raman scattering detection of deoxynivalenol and ochratoxin A with a linear polymer affinity agent

A linear, methacrylamide polymer affinity agent was explored to capture two mycotoxins, deoxynivalenol (DON) and ochratoxin A (OTA), for multiplex surface-enhanced Raman scattering (SERS) detection. These mycotoxins are naturally occurring small molecules from fungi that can be dangerous at low concentrations. SERS detection was completed for each polymer-toxin complex at concentrations relevant to current safety regulation by the FDA: 1 ppm for DON and 5 ppb for OTA. Visibly distinguishable vibrational modes were observed in the multiplex spectra that were attributed to each mycotoxin individually, thus, not requiring any additional chemometric analysis. Density functional theory (DFT) was used to model DON and OTA to accurately label the vibrational modes in the experimental spectra as well as provide insight on the binding between both targets and the affinity agent. Fully modeled vibrations of these toxins are novel contributions due to OTA never being modeled and only a few published vibrational modes of DON. DFT guides empirical observations regarding hydrogen bonding at multiple sites of each mycotoxin target molecule through the amine groups on the polymer, confirming the capabilities of a single polymer affinity agent to facilitate multiplex detection of a class of molecules through less-specific interactions than traditional affinity agents.

Recent advances in surface-enhanced Raman scattering-based microdevices for point-of-care diagnosis of viruses and bacteria

This minireview reports the recent advances in surface-enhanced Raman scattering (SERS)-based assay devices for the diagnosis of infectious diseases. SERS-based detection methods have shown promise in overcoming the low sensitivity and multiplex detection problems inherent to fluorescence detection. Therefore, it is interesting to investigate the current status, challenges, and applications associated with SERS-based microdevices for the point-of-care (POC) diagnosis of infectious diseases. The majority of this review highlights three different types of microdevices, namely microfluidic channels, lateral flow assay strips, and three-dimensional nanostructured substrates. Furthermore, the integration of portable Raman spectrophotometry with microdevices provides an ideal platform for the diagnosis of various infectious diseases in the field. Integrated SERS-based assay systems also enable measurements in minimal sample volumes and at low analyte concentrations of viral or bacterial samples. A significant number of studies using the SERS-based assay system have been performed recently to realize POC diagnostics, especially under resource-limited conditions. This portable SERS sensor is expected to be a next-generation POC assay system that could overcome the limitations of current fluorescence-based assay systems. This minireview summarizes recent advances in the development of SERS-based microdevices for the diagnosis of infectious diseases. Lastly, challenges to overcome and future perspectives are discussed.

Rapid and Quantitative Detection of Aflatoxin B1 in Grain by Portable Raman Spectrometer

Many foodstuffs are extremely susceptible to contamination with aflatoxins, in which aflatoxin B₁ is highly toxic and carcinogenic. Therefore, it is crucial to develop a rapid and effective analytical method for detecting and monitoring aflatoxin B₁ in food. Herein, a surface-enhanced Raman spectroscopic (SERS) method combined with QuEChERS (quick, easy, cheap-effective, rugged, safe) sample pretreatment technique was used to detect aflatoxin B₁. Sample preparation was optimized into a one-step extraction method using an Au nanoparticle-based solution (Au sol) as the SERS detection substrate. An affordable portable Raman spectrometer was then used for rapid, label-free, quantitative detection of aflatoxin B₁ levels in foodstuffs. This method showed a good linear log relationship between the Raman signal intensity of aflatoxin B₁ in the 1-1000 µg L^-1 concentration range with a limit of detection of 0.85 µg kg^-1 and a correlation coefficient of 0.9836. Rapid aflatoxin B₁ detection times of ∼10 min for wheat, corn, and protein feed powder samples were also achieved. This method has high sensitivity, strong specificity, excellent stability, is simple to use, economical, and is suitable for on-site detection, with good prospects for practical application in the field of food safety.

Attomolar Sensing Based on Liquid Interface-Assisted Surface-Enhanced Raman Scattering in Microfluidic Chip by Femtosecond Laser Processing

Surface-enhanced Raman scattering (SERS) is a multidisciplinary trace analysis technique based on plasmonic effects. The development of SERS microfluidic chips has been exploited extensively in recent times impacting on applications in diverse fields. However, despite much progress, the excitation of label-free molecules is extremely challenging when analyte concentrations are lower than 1 nM because of the blinking SERS effect. In this paper, a novel analytical strategy which can achieve detection limits at an attomolar level is proposed. This performance improvement is due to the use of a glass microfluidic chip that features an analyte air-solution interface which forms on the SERS substrate in the microfluidic channel, whereby the analyte molecules aggregate locally at the interface during the measurement, hence the term liquid interface-assisted SERS (LI-SERS). The microfluidic chips are fabricated using hybrid femtosecond (fs) laser processing consisting of fs laser-assisted chemical etching, selective metallization, and metal surface nanostructuring. The novel LI-SERS technique can achieve an analytical enhancement factor of 1.5 × 10¹⁴, providing a detection limit below 10^-17 M (<10 aM). The mechanism for the extraordinary enhancement afforded by LI-SERS is attributed to Marangoni convection induced by the photothermal effect.

Uniform Periodic Bowtie SERS Substrate with Narrow Nanogaps Obtained by Monitored Pulsed Electrodeposition

Surface-enhanced Raman spectroscopy (SERS) is a highly sensitive technique with molecular specificity, making it an ideal analytical tool in various fields. However, the breadth of practical applications of SERS has been severely limited because it is still a great challenge to achieve simultaneously a high sensitivity and a high reproducibility. Herein, we report a highly controllable method to fabricate periodic bowtie SERS substrates with a narrow nanogap, high SERS enhancement, and good uniformity over a large area. The periodic bowtie template is first fabricated over a gold film by holographic lithography (HL), followed by Au deposition to obtain a conductive plasmonic bowtie array. The gap size is then narrowed down by pulsed electrodeposition of Ag simultaneously monitored in situ by electrochemical dark field spectroscopy. Thus, we are able to observe the most sensitive change in the scattering spectra when the gap is just about to merge and obtain uniform SERS substrates with a gap size down to around 5 nm. The average enhancement factor of 5 × 10⁷ to 1 × 10⁸ is obtained, which is 50 times larger than that from Au nanoparticle-assembled substrates and 140 times larger than that from commercial Klarite chips. This substrate offers a promising opportunity for SERS practical applications.

Hydrophobic Plasmonic Nanoacorn Array for a Label-Free and Uniform SERS-Based Biomolecular Assay

A surface-enhanced Raman scattering (SERS) aptasensor based on a hydrophobic assembled nanoacorn (HANA) was developed with improved reproducibility and reduced nonspecific binding effect. In the fabrication process, a hexagonal-packed gold film over nanosphere (AuFON) arrays was first obtained and used as a hydrophobic plasmonic substrate. Then, a uniform sub-3 nm molecular spacer array (containing Raman reporters) was prepared by patterning nanometric hydrophilic ultrathin patches onto the hydrophobic AuFON, in which the hydrophilic thin layer is composed of polymers and aptamers. During the sensing process, the HANA aptasensor smartly impedes the adsorption of SERS probes as Au@Ag nanocubes (Au@Ag NCs) in the absence of targets. In the presence of targets, the displacement of aptamers occurs due to the specific interaction between the targets and the aptamers, and the Au@Ag NCs can be assembled onto the hydrophilic patches on AuFON through electrostatic interactions with polymers. Thus, SERS signals of reporter molecules inside the spacer can be dramatically enhanced due to the formation of a nanoparticle-on-mirror (NPoM) array. In such a SERS aptasensor, the well-ordered distribution of SERS probes ensures excellent repeatability, while the precise subnanometer junctions guarantee high sensitivity. More importantly, since the hydrophobic surface can greatly reduce nonspecific adsorption, the tedious process of nonspecific blocking that is employed in traditional biosensors is no longer needed. Using such a SERS HANA platform, human epidermal growth factor receptor 2 (HER2) and three exosomal proteins were analyzed with high sensitivity and good reproducibility (RSD < 7%) in whole-blood samples.

Encapsulation of 3D plasmonic nanostructures with ultrathin hydrogel skin for rapid and direct detection of toxic small molecules in complex fluids

Nanogap-rich 3D plasmonic nanostructures provide enhanced molecular Raman fingerprints in a nondestructive and label-free manner. However, the molecular detection of small target molecules in complex fluids is challenging due to nonspecific protein adsorption, which prevents access of the target molecules. Therefore, the molecular detection for complex mixtures usually requires a tedious and time-consuming pretreatment of samples. Herein, we report the encapsulation of 3D plasmonic nanostructures with an ultrathin hydrogel skin for the rapid and direct detection of small molecules in complex mixtures. To demonstrate the proof of concept, we directly detect pesticide dissolved in milk without pretreatment. This detection is enabled by the selective permeation of target molecules into the 3D mesh of the hydrogel skin and the adsorption onto plasmonic hotspots, accompanied by the rejection of large adhesive proteins and colloids. The high sensitivity of nanogap-rich plasmonic nanostructures in a conjunction with the molecular selection of the hydrogel skin enables the fast and reliable detection of tricyclazole in whole milk with a limit of detection as low as 10 ppb within 1 h. We believe that this plasmonic platform is highly adaptable for in situ and on-site detection of small molecules in various complex mixtures including foods, biological fluids, and environmental fluids.

Profiling DNA mutation patterns by SERS fingerprinting for supervised cancer classification

Profiling DNA mutation patterns for cancer classification plays an essential role in precision and personalized medicine. Conventional PCR-based mutation assay is limited by the extensive labour on target amplification. We herein create an amplification-free surface enhanced Raman spectroscopy (SERS) biochip which enables direct and simultaneous identification of multiple point mutations in tumor cells. Without pre-amplifying the target sequences, the SERS assay reads out the presence of cellular mutations through the interpretation of Raman fingerprints. The SERS sensor is integrated into a microfluidic chip, achieving one-step multiplex analysis within 40 min. Importantly, by combining SERS spectra encoding technique with supervised learning algorithm, a panel of nucleotide mixtures can be well distinguished according to their mutation profiles. We initially demonstrate an excellent levels of classification in samples from colorectal cancer and melanoma cell lines. For final clinical validation, the system performance is verified by classifying cancer patient samples, which shows an accuracy above 90%. Due to the simplicity and rapidness, the SERS biosensor is expected to become a promising tool for clinical point-of-care diagnosis towards precision medicine.

Quasi-3D Plasmonic Nanowell Array for Molecular Enrichment and SERS-Based Detection

We report on a quasi-three-dimensional (3D) plasmonic nanowell array with high structural uniformity for molecular detection. The quasi-3D plasmonic nanowell array was composed of periodic hexagonal Au nanowells whose surface is densely covered with gold nanoparticles (Au NPs), separated by an ultrathin dielectric interlayer. The uniform array of the Au nanowells was fabricated by nanoimprint lithography and deposition of Au thin film. A self-assembled monolayer (SAM) of perfluorodecanethiol (PFDT) was coated on the Au surface, on which Au was further deposited. Interestingly, the PFDT-coated Au nanowells were fully covered with Au NPs with an ultra-high density of 375 μm^-2 rather than a smooth film due to the anti-wetting property of the low-energy surface. The plasmonic nanogaps formed among the high-density Au NPs led to a strong near-field enhancement via coupled localized surface plasmon resonance and produced a uniform surface-enhanced Raman spectroscopy (SERS) response with a small relative standard deviation of 5.3%. Importantly, the highly uniform nanostructure, featured by the nanoimprint lithography and 3D growth of densely-packed Au NPs, minimizes the spatial variation of Raman intensity, potentially providing quantitative analysis. Moreover, analyte molecules were highly concentrated and selectively deposited in nanowells when a water droplet containing the analyte was evaporated on the plasmonic substrate. The analyte formed a relatively thick overcoat in the nanowells near the triple line due to the coffee-ring effects. Combining 3D plasmonic nanowell substrates with molecular enrichments, highly sensitive detection of lactic acid was demonstrated. Given its combination of high sensitivity and signal uniformity, the quasi-3D plasmonic nanowell substrate is expected to provide a superior molecular detection platform for biosensing applications.

Tethered molecular redox capacitors for nanoconfinement-assisted electrochemical signal amplification

Nanostructured materials offer the potential to drive future developments and applications of electrochemical devices, but are underutilized because their nanoscale cavities can impose mass transfer limitations that constrain electrochemical signal generation. Here, we report a new signal-generating mechanism that employs a molecular redox capacitor to enable nanostructured electrodes to amplify electrochemical signals even without an enhanced reactant mass transfer. The surface-tethered molecular redox capacitor engages diffusible reactants and products in redox-cycling reactions with the electrode. Such redox-cycling reactions are facilitated by the nanostructure that increases the probabilities of both reactant-electrode and product-redox-capacitor encounters (i.e., the nanoconfinement effect), resulting in substantial signal amplification. Using redox-capacitor-tethered Au nanopillar electrodes, we demonstrate improved sensitivity for measuring pyocyanin (bacterial metabolite). This study paves a new way of using nanostructured materials in electrochemical applications by engineering the reaction pathway within the nanoscale cavities of the materials.

A SERS-based competitive immunoassay for highly sensitive and specific detection of ochratoxin A

A SERS sensor for ochratoxin A detection based on three-dimensional magnetic beads and competitive immunoassay.

Reusable Surface-Enhanced Raman Spectroscopy Substrates Made of Silicon Nanowire Array Coated with Silver Nanoparticles Fabricated by Metal-Assisted Chemical Etching and Photonic Reduction

Surface-enhanced Raman spectroscopy (SERS) has advanced over the last four decades and has become an attractive tool for highly sensitive analysis in fields such as medicine and environmental monitoring. Recently, there has been an urgent demand for reusable and long-lived SERS substrates as a means of reducing the costs associated with this technique To this end, we fabricated a SERS substrate comprising a silicon nanowire array coated with silver nanoparticles, using metal-assisted chemical etching followed by photonic reduction. The morphology and growth mechanism of the SERS substrate were carefully examined and the performance of the fabricated SERS substrate was tested using rhodamine 6G and dopamine hydrochloride. The data show that this new substrate provides an enhancement factor of nearly 1 × 10⁸. This work demonstrates that a silicon nanowire array coated with silver nanoparticles is sensitive and sufficiently robust to allow repeated reuse. These results suggest that this newly developed technique could allow SERS to be used in many commercial applications.

SERS-Based Immunoassays for the Detection of Botulinum Toxins A and B Using Magnetic Beads

Rapid and sensitive detection of botulinum neurotoxins (BoNTs) is important for immediate treatment with proper antitoxins. However, it is difficult to detect BoNTs at the acute phase of infection, owing to its rarity and ambiguous symptoms. To resolve this problem, we developed a surface-enhanced Raman scattering (SERS)-based immunoassay technique for the rapid and sensitive detection of BoNTs. Magnetic beads and SERS nanotags as capture substrates and detection probes, respectively, and Nile Blue A (NBA) and malachite green isothiocyanate (MGITC) as Raman reporter molecules were used for the detection of two different types of BoNTs (types A and B), respectively. The corresponding limits of detection (LODs) were determined as 5.7 ng/mL (type A) and 1.3 ng/mL (type B). Total assay time, including that for immunoreaction, washing, and detection, was less than 2 h.

Template growth of Au/Ag nanocomposites on phosphorene for sensitive SERS detection of pesticides

We report template growth and dense packing of noble metallic nanoparticles (NPs) on few-layer phosphorene for sensitive surface-enhanced Raman scattering (SERS) detection. Phosphorene obtained by electrochemical exfoliation serves as both the template and reductant in the fabrication of noble metallic NPs which are dispersed on phosphorene without aggregation or pile-up. The BP/Ag/Au and BP/Au/Ag nanocomposites with a nanogap structure exhibit excellent SERS sensitivity and reproducibility with respect to Rhodamine 6G. The BP/Au/Ag nanocomposite is further utilized as the SERS substrate for the detection of two fungicides, thiabendazole and thiram, and detection limits of 10^-7 and 10^-8 M are achieved. Template growth of Au/Ag nanocomposites is demonstrated to be a green strategy for the fabrication of SERS substrates and has large potential in applications such as pesticide detection.

Facile synthesis of silver-rich Au/Ag bimetallic nanoparticles with highly active SERS properties

A one-pot route to the synthesis of Au/Ag bimetallic nanoparticles with a high SERS activity for detection of proteins at low concentration.