Recent Advances of Porous Graphene: Synthesis, Functionalization, and Electrochemical Applications

Covalent functionalization of 1D and 2D sp2-carbon nanoallotropes - twelve years of progress (2011-2023)

Carbon nanoallotropes have attracted significant attention in the field of materials science due to their unique combination of physicochemical and biological properties, with numerous applications. One-dimensional (1D) and two-dimensional (2D) sp2-carbon nanoallotropes, such as carbon nanohorns (CNHs), carbon nanotubes (CNTs), and graphene, have emerged as prominent candidates for a variety of technological advancements. To fully exploit their exceptional characteristics, the covalent functionalization of these nanostructures may alleviate the problems with the processing and final performance. This route of the carbon nanoallotrope functionalization is based on a covalent attachment of functional groups or molecules (via linkers of various strengths) to their surfaces, enabling precise control over physical, chemical, biological, and electronic properties. Such an approach opens up new avenues for tailoring the nanoallotrope characteristics, such as solubility/dispersibility, reactivity, and interactions with other materials. Over more than the last decade, significant progress has been made in the covalent functionalization of both 1D and 2D sp2-carbon nanoallotropes, paving the way for diverse applications in the nanoelectronics, energy storage, sensing, and biomedical fields. In this comprehensive review, we provide state-of-the-art advancements and achievements in the covalent functionalization of 1D and 2D sp2-carbon nanoallotropes during the past dozen years. We aim to highlight the key strategies, methodologies, and breakthroughs that have significantly contributed to this field. Eventually, we discuss the implications of those advancements and explore the opportunities for future research and applications.

Flat bands without twists: periodic holey graphene

Holey Graphene(HG) is a widely used graphene material for the synthesis of high-purity and highly crystalline materials. The electronic properties of a periodic distribution of lattice holes are explored here, demonstrating the emergence of flat bands. It is established that such flat bands arise as a consequence of an induced sublattice site imbalance, i.e. by having more sites in one of the graphene's bipartite sublattice than in the other. This is equivalent to the breaking of a path-exchange symmetry. By further breaking the inversion symmetry, gaps and a nonzero Berry curvature are induced, leading to topological bands. In particular, the folding of the Dirac cones from the hexagonal Brillouin zone (BZ) to the holey superlattice rectangular BZ of HG, with sizes proportional to an integerntimes the graphene's lattice parameter, leads to a periodicity in the gap formation such thatn≡0(mod 3). A low-energy hamiltonian for the three central bands is also obtained revealing that the system behaves as an effectiveα-T3graphene material. Therefore, a simple protocol is presented here that allows for obtaining flat bands at will. Such bands are known to increase electron-electron correlation effects. Therefore, the present work provides an alternative system that is much easier to build than twisted systems, allowing for the production of flat bands and potentially highly correlated quantum phases.

Mesoporous Nitrogen-Doped Holey Reduced Graphene Oxide: Preparation, Purification, and Application for Metal-Free Electrochemical Sensing of Dopamine

Holey graphenic nanomaterials with porosity within the basal plane attract significant interest. It is observed that the perforation of graphene can enhance the specific surface area of the nanosheet, ensuring effective wetting and penetration of electrolytes to the electrode surface, facilitating rapid charge transfer, and boosting the electrocatalytic efficacy of the transducers. This study reports the first example of nitrogen-doped holey reduced graphene oxide with a mesoporous morphology of the graphene basal plane (N-MHG). It is shown that N-MHG can be synthesized through a one-step hydrothermal treatment of GO using NH3 and H2O2. A straightforward procedure for the purification of N-MHG has also been developed. AFM, TEM, and Raman analyses have revealed that N-MHG possesses a highly mesoporous network structure with a pore size ranging from 10 to 50 nm. X-ray photoelectron spectroscopy data have indicated a partial reduction of the graphene oxide sheets during the etching process but also show a 3-5 times higher content of C═O and O-C═O fragments compared to rGO. This could account for the remarkable stability of the N-MHG aqueous suspension. An electrochemical sensor for dopamine analysis is assembled on a glassy carbon electrode with N-MHG/Nafion membrane and characterized by cyclic voltammetry and electrochemical impedance spectroscopy.

Implications of graphene-based materials in dentistry: present and future

Since the advent of nanoscience, nanobiomaterials have been applied in the dental industry. Graphene and its derivatives have attracted the most interest of all of them due to their exceptional look, biocompatibility, multiplication differential, and antibacterial capabilities. We outlined the most recent developments about their applications to dentistry in our review. There is discussion of the synthesis processes, architectures, and characteristics of materials based on graphene. The implications of graphene and its counterparts are then meticulously gathered and described. Finally, in an effort to inspire more excellent research, this paper explores the obstacles and potential of graphene-based nanomaterials for dental aspects.

Identifying optical microscope images of CVD-grown two-dimensional MoS2 by convolutional neural networks and transfer learning

Background

In Complementary Metal-Oxide Semiconductor (CMOS) technology, scaling down has been a key strategy to improve chip performance and reduce power losses. However, challenges such as sub-threshold leakage and gate leakage, resulting from short-channel effects, contribute to an increase in distributed static power. Two-dimensional transition metal dichalcogenides (2D TMDs) emerge as potential solutions, serving as channel materials with steep sub-threshold swings and lower power consumption. However, the production and development of these 2-dimensional materials require some time-consuming tasks. In order to employ them in different fields, including chip technology, it is crucial to ensure that their production meets the required standards of quality and uniformity; in this context, deep learning techniques show significant potential.

Methods

This research introduces a transfer learning-based deep convolutional neural network (CNN) to classify chemical vapor deposition (CVD) grown molybdenum disulfide (MoS2) flakes based on their uniformity or the occurrence of defects affecting electronic properties. Acquiring and labeling a sufficient number of microscope images for CNN training may not be realistic. To address this challenge, artificial images were generated using Fresnel equations to pre-train the CNN. Subsequently, accuracy was improved through fine-tuning with a limited set of real images.

Results

The proposed transfer learning-based CNN method significantly improved all measurement metrics with respect to the ordinary CNNs. The initial CNN, trained with limited data and without transfer learning, achieved 68% average accuracy for binary classification. Through transfer learning and artificial images, the same CNN achieved 85% average accuracy, demonstrating an average increase of approximately 17%. While this study specifically focuses on MoS2 structures, the same methodology can be extended to other 2-dimensional materials by simply incorporating their specific parameters when generating artificial images.

Electrochemical and Electrical Biosensors for Wearable and Implantable Electronics Based on Conducting Polymers and Carbon-Based Materials

Bioelectronic devices are designed to translate biological information into electrical signals and vice versa, thereby bridging the gap between the living biological world and electronic systems. Among different types of bioelectronics devices, wearable and implantable biosensors are particularly important as they offer access to the physiological and biochemical activities of tissues and organs, which is significant in diagnosing and researching various medical conditions. Organic conducting and semiconducting materials, including conducting polymers (CPs) and graphene and carbon nanotubes (CNTs), are some of the most promising candidates for wearable and implantable biosensors. Their unique electrical, electrochemical, and mechanical properties bring new possibilities to bioelectronics that could not be realized by utilizing metals- or silicon-based analogues. The use of organic- and carbon-based conductors in the development of wearable and implantable biosensors has emerged as a rapidly growing research field, with remarkable progress being made in recent years. The use of such materials addresses the issue of mismatched properties between biological tissues and electronic devices, as well as the improvement in the accuracy and fidelity of the transferred information. In this review, we highlight the most recent advances in this field and provide insights into organic and carbon-based (semi)conducting materials' properties and relate these to their applications in wearable/implantable biosensors. We also provide a perspective on the promising potential and exciting future developments of wearable/implantable biosensors.

Understanding Macroalgae: A Comprehensive Exploration of Nutraceutical, Pharmaceutical, and Omics Dimensions

Driven by a surge in global interest in natural products, macroalgae or seaweed, has emerged as a prime source for nutraceuticals and pharmaceutical applications. Characterized by remarkable genetic diversity and a crucial role in marine ecosystems, these organisms offer not only substantial nutritional value in proteins, fibers, vitamins, and minerals, but also a diverse array of bioactive molecules with promising pharmaceutical properties. Furthermore, macroalgae produce approximately 80% of the oxygen in the atmosphere, highlighting their ecological significance. The unique combination of nutritional and bioactive attributes positions macroalgae as an ideal resource for food and medicine in various regions worldwide. This comprehensive review consolidates the latest advancements in the field, elucidating the potential applications of macroalgae in developing nutraceuticals and therapeutics. The review emphasizes the pivotal role of omics approaches in deepening our understanding of macroalgae's physiological and molecular characteristics. By highlighting the importance of omics, this review also advocates for continued exploration and utilization of these extraordinary marine organisms in diverse domains, including drug discovery, functional foods, and other industrial applications. The multifaceted potential of macroalgae warrants further research and development to unlock their full benefits and contribute to advancing global health and sustainable industries.

N-doped carbon Co/CoOx with laccase-like activity for detection of epinephrine

N-doped carbon Co/CoOx with laccase-like activity was directionally designed by pyrolyzing Co-coordination polymer and applied to detect epinephrine, which revealed a new preparation strategy for laccase mimics. The formation mechanism of the N-doped carbon Co/CoOx nanozyme was reconnoitered by a thermogravimetric-mass spectrometry system (TG-MS). N-doped carbon Co/CoOx exhibited outstanding laccase-like activity, and the Michaelis-Menten constant and maximum initial velocity were calculated to be 0.087 mM and 0.0089 μM s-1, respectively. Based on this principle, a simple colorimetric sensing platform was developed for the quantitative detection of epinephrine, which can be used to diagnose pheochromocytoma. In addition, the visual platform for detecting epinephrine exhibited a linear range of 3 to 20 μg mL-1 and a calculated detection limit of 0.42 μg mL-1. Therefore, the proposed colorimetric sensing platform is a promising candidate to be applied in precise early pheochromocytoma diagnosis.

Molybdenum disulfide (MoS2) along with graphene nanoplatelets (GNPs) utilized to enhance the capacitance of conducting polymers (PANI and PPy)

Hybrid composites of molybdenum disulfide (MoS2), graphene nanoplatelets (GNPs) and polyaniline (PANI)/polypyrrole (PPy) have been synthesized as cost-effective electrode materials for supercapacitors. We have produced MoS2 from molybdenum dithiocarbamate by a melt method in an inert environment and then used a liquid exfoliation method to form its composite with graphene nanoplatelets (GNPs) and polymers (PANI and PPy). The MoS2 melt/GNP ratio in the resultant composites was 1 : 3 and the polymer was 10% by wt. of the original composite. XRD (X-ray diffraction analysis) confirmed the formation of MoS2 and SEM (scanning electron microscopy) revealed the morphology of the synthesized materials. The electrochemical charge storage performance of the synthesized composite materials was assessed by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and galvanostatic charge/discharge (GCCD) measurements. Resultant composites showed enhanced electrochemical performances (specific capacitance = 236.23 F g-1, energy density = 64.31 W h kg-1 and power density = 3858.42 W kg-1 for MoS2 melt 5 mPP at a current density of 0.57 A g-1 and had 91.87% capacitance retention after 10 000 charge-discharge cycles) as compared to the produced MoS2; thus, they can be utilized as electrode materials for supercapacitors.

Immobilization of Enzyme Electrochemical Biosensors and Their Application to Food Bioprocess Monitoring

Electrochemical biosensors based on immobilized enzymes are among the most popular and commercially successful biosensors. The literature in this field suggests that modification of electrodes with nanomaterials is an excellent method for enzyme immobilization, which can greatly improve the stability and sensitivity of the sensor. However, the poor stability, weak reproducibility, and limited lifetime of the enzyme itself still limit the requirements for the development of enzyme electrochemical biosensors for food production process monitoring. Therefore, constructing sensing technologies based on enzyme electrochemical biosensors remains a great challenge. This article outlines the construction principles of four generations of enzyme electrochemical biosensors and discusses the applications of single-enzyme systems, multi-enzyme systems, and nano-enzyme systems developed based on these principles. The article further describes methods to improve enzyme immobilization by combining different types of nanomaterials such as metals and their oxides, graphene-related materials, metal-organic frameworks, carbon nanotubes, and conducting polymers. In addition, the article highlights the challenges and future trends of enzyme electrochemical biosensors, providing theoretical support and future perspectives for further research and development of high-performance enzyme chemical biosensors.

Preparation of wavy three-dimensional graphene-like biochar and its adsorption mechanism of embedded separation for dimethoate

In this study, graphene-like biochar (IZBC) was prepared by pyrolysis of wheat straw in the presence of catalyst and activator. The formation of graphene in IZBC could be divided into three stages: shell core generation, carburization, and carbon precipitation. When the pyrolysis temperatures were in the ranges of 500-600 ℃, 600-700 ℃, 700-800 ℃ and 800-900 ℃, 17%, 32%, 13% and 38% of graphene were produced, respectively. The contribution ratios of graphene by FeCl₃, ZnCl₂ and HCl were 64%, 23% and 13%, respectively. Moreover, IZBC was filled with porous wavy three-dimensional graphene nanosheets that enabled self-aggregation to be effectively prevented, which was superior to the striped two-dimensional structure. The adsorption of IZBC for dimethoate was a spontaneous exothermic reaction with the adsorption capacity of 980 μmol/g, which was consistent with the pseudo-second-order and intraparticle diffusion models. The adsorption was inhibited by coexisting cations, anions, and humic acid in water. Dimethoate was adsorbed on graphene through embedded separation, with pore filling, cation-π and electrostatic attraction as the key driving forces. In addition, the adsorbed saturated IZBC could be effectively regenerated for many times by 2 mol/L HCl solution.

Large area MoS2 thin film growth by direct sulfurization

In this study, we present the growth of monolayer MoS₂ (molybdenum disulfide) film. Mo (molybdenum) film was formed on a sapphire substrate through e-beam evaporation, and triangular MoS₂ film was grown by direct sulfurization. First, the growth of MoS₂ was observed under an optical microscope. The number of MoS₂ layers was analyzed by Raman spectrum, atomic force microscope (AFM), and photoluminescence spectroscopy (PL) measurement. Different sapphire substrate regions have different growth conditions of MoS₂. The growth of MoS₂ is optimized by controlling the amount and location of precursors, adjusting the appropriate growing temperature and time, and establishing proper ventilation. Experimental results show the successful growth of a large-area single-layer MoS₂ on a sapphire substrate through direct sulfurization under a suitable environment. The thickness of the MoS₂ film determined by AFM measurement is about 0.73 nm. The peak difference between the Raman measurement shift of 386 and 405 cm^-1 is 19.1 cm^-1, and the peak of PL measurement is about 677 nm, which is converted into energy of 1.83 eV, which is the size of the direct energy gap of the MoS₂ thin film. The results verify the distribution of the number of grown layers. Based on the observation of the optical microscope (OM) images, MoS₂ continuously grows from a single layer of discretely distributed triangular single-crystal grains into a single-layer large-area MoS₂ film. This work provides a reference for growing MoS₂ in a large area. We expect to apply this structure to various heterojunctions, sensors, solar cells, and thin-film transistors.

3D graphene: synthesis, properties, and solar cell applications

Three-dimensional (3D) graphene is one of the most important nanomaterials. This feature article highlights the advancements, with an emphasis on contributions from our group, in the synthesis of 3D graphene-based materials and their utilization in solar cells. Chemistries of graphene oxides, hydrocarbons, and alkali metals are discussed for the synthesis of 3D graphene materials. Their performances in dye-sensitized solar cells and perovskite solar cells (as counter electrodes, photoelectrodes, and electron extracting layers) were correlatively analyzed with their properties/structures (accessible surface area, electrical conductivity, defects, and functional groups). The challenges and prospects for their applications in photovoltaic solar cells are outlined.

On the Road to the Frontiers of Lithium-Ion Batteries: A Review and Outlook of Graphene Anodes

Graphene has long been recognized as a potential anode for next-generation lithium-ion batteries (LIBs). The past decade has witnessed the rapid advancement of graphene anodes, and considerable breakthroughs are achieved so far. In this review, the aim is to provide a research roadmap of graphene anodes toward practical LIBs. The Li storage mechanism of graphene is started with and then the approaches to improve its electrochemical performance are comprehensively summarized. First, morphologically engineered graphene anodes with porous, spheric, ribboned, defective and holey structures display improved capacity and rate performance owing to their highly accessible surface area, interconnected diffusion channels, and sufficient active sites. Surface-modified graphene anodes with less aggregation, fast electrons/ions transportation, and optimal solid electrolyte interphase are discussed, demonstrating the close connection between the surface structure and electrochemical activity of graphene. Second, graphene derivatives anodes prepared by heteroatom doping and covalent functionalization are outlined, which show great advantages in boosting the Li storage performances because of the additionally introduced defect/active sites for further Li accommodation. Furthermore, binder-free and free-standing graphene electrodes are presented, exhibiting great prospects for high-energy-density and flexible LIBs. Finally, the remaining challenges and future opportunities of practically available graphene anodes for advanced LIBs are highlighted.

Porous nitrogen-doped reduced graphene oxide-supported CuO@Cu2O hybrid electrodes for highly sensitive enzyme-free glucose biosensor

Constructing high-performance enzyme-free biosensors for detecting glucose is essential to preliminary diabetes diagnosis. Here, copper oxide nanoparticles (CuO@Cu₂O NPs) were anchored in porous nitrogen-doped reduced graphene oxide (PNrGO) to construct CuO@Cu₂O/PNrGO/GCE hybrid electrode for sensitive detection of glucose. Benefiting from the remarkable synergistic effects between the multiple high activation sites of CuO@Cu₂O NPs and the dramatic properties of PNrGO with excellent conductivity and large surface area with many accessible pores, the hybrid electrode possesses outstanding glucose sensing performance that is far superior to those of pristine CuO@Cu₂O electrode. The as-fabricated enzyme-free glucose biosensor displays prominent glucose sensitivity of 2,906.07 μA mM^-1 cm^-2, extremely low limit of detection of 0.13 μM, and wide linear detection of 3 μM-6.772 mM. In addition, excellent reproducibility, favorable long-term stability, and distinguished selectivity are obtained in the glucose detection. Importantly, this study provides promising results for continuous improvement of non-enzyme sensing applications.

Research Progress on Graphite-Derived Materials for Electrocatalysis in Energy Conversion and Storage

High-performance electrocatalysts are critical to support emerging electrochemical energy storage and conversion technologies. Graphite-derived materials, including fullerenes, carbon nanotubes, and graphene, have been recognized as promising electrocatalysts and electrocatalyst supports for the oxygen reduction reaction (ORR), oxygen evolution reaction (OER), hydrogen evolution reaction (HER), and carbon dioxide reduction reaction (CO₂RR). Effective modification/functionalization of graphite-derived materials can promote higher electrocatalytic activity, stability, and durability. In this review, the mechanisms and evaluation parameters for the above-outlined electrochemical reactions are introduced first. Then, we emphasize the preparation methods for graphite-derived materials and modification strategies. We further highlight the importance of the structural changes of modified graphite-derived materials on electrocatalytic activity and stability. Finally, future directions and perspectives towards new and better graphite-derived materials are presented.

Synthesis of graphene nanomesh with symmetrical fractal patterns via hydrogen-free chemical vapor deposition

Graphene nanomesh (GNM), an emerging graphene nanostructure with a tunable bandgap, has gained tremendous interests owing to its great potentials in the fields of high-performance field-effect transistors, electrochemical sensors, new generation of spintronics and energy converters. In previous works, GNM has been successfully obtained on copper foil surface by employing hydrogen as an etching agent. A more facile, and low-cost strategy for the preparation of GNM is required. Here, we demonstrated a direct and feasible means for synthesizing large-area GNM with symmetrical fractal patterns via a hydrogen-free chemical vapor deposition method. The influences of the growth time and the gas source flow on the morphology of GNM patterns were systematically investigated. Then, we exhibited the key reaction details and proposed a growth mechanism of the GNM synthesis during the hydrogen-free chemical vapor deposition process. This work provides a valuable guidance for quality control in GNM mass production.

Ultrasound-assisted synthesis of graphene@MXene hybrid: A novel and promising material for electrochemical sensing

To date, multiple graphene@MXene hybrids have been reported via various synthesis approaches, but almost all the graphene@MXene hybrids inevitably used the reduced graphene oxide that prepared by chemical oxidation/reduction method, which generally involved the complex and dangerous operation procedure, and the highly toxic chemical reagent. How to prepare graphene@MXene hybrid through a simple, safe and eco-friendly synthetic route is highly desired. Compared with traditional synthesis technology, ultrasound synthesis strategy displays the merits of simplicity, low cost and environment protection. Herein, MXene (Ti₃C₂T_x) nanoflakes coupled with graphene nanosheets (graphene@MXene) were prepared in N-methylpyrrolidone (NMP) by simple ultrasound-assisted liquid-phase exfoliation method for the first time. Besides, the effect of types of solvent with different viscocity, sonication temperature and sonication duration time on the property of graphene@MXene hybrids were systematacially investigated. It is found the liquid-phase exfoliated graphene owned excellent electron transfer ability and the MXene (Ti₃C₂T_x) nanoflakes possessed outstanding adsorption property, the as-synthesized graphene@MXene hybrid exhibited significant signal synergistic enhancement effect toward the oxidation of hazardous veterinary drug residue compound (chlorpromazine) and food additives (rhodamine B). Based on this, a novel and sensitive electrochemical sensor was fabricated, the linear detection ranges were 5 nM to 0.5 μM for chlorpromazine with sensitivity of 1090 µA μM^-1 cm^-2, and 10 nM to 2.5 μM for rhodamine B with sensitivity of 440 and 102.14 µA μM^-1 cm^-2. Besides, the detection limits were evaluated to be as low as 1.25 nM and 2.45 nM for chlorpromazine and rhodamine B, respectively.

Soft Template-Assisted Fabrication of Mesoporous Graphenes for High-Performance Energy Storage Systems

Graphene is a promising active material for electric double layer supercapacitors (EDLCs) due to its high electric conductivity and lightweight nature. However, for practical uses as a power source of electronic devices, a porous structure is advantageous to maximize specific energy density. Here, we propose a facile fabrication approach of mesoporous graphene (m-G), in which self-assembled mesoporous structures of poly(styrene)-block-poly(2-vinylpyridine) copolymer (PS-b-P2VP) are exploited as both mesostructured catalytic template and a carbon source. Notably, the mesostructured catalytic template is sufficient to act as a rigid support without structural collapse, while PS-b-P2VP converts to graphene, generating m-G with a pore diameter of ca. 3.5 nm and high specific surface area of 186 m²/g. When the EDLCs were prepared using the obtained m-G and ionic liquids, excellent electrochemical behaviors were achieved even at high operation voltages (0 ∼ 3.5 V), including a large specific capacitance (130.2 F/g at 0.2 A/g), high-energy density of 55.4 W h/kg at power density of 350 W/kg, and excellent cycle stability (>10,000 cycles). This study demonstrates that m-G is a promising material for high-performance energy storage devices.

Synthesis of morphology-controlled N-doped porous carbon for simultaneous electrochemical sensing of dihydroxybenzene isomers

Different morphology of N-doped carbon materials, including three-dimensional interconnected N-doped hierarchically porous carbon networks (3D-NC), two-dimensional ultrathin porous carbon nanosheets (2D-NC), and bulk N-doped carbon with micron size (bulk-NC), was easily prepared by using NaCl crystal templates-assisted strategy. Compared with bare glassy carbon, bulk-NC, and 2D-NC, the as-synthesized 3D-NC exhibits excellent electrochemical activity toward the oxidation and sensing of three kinds of common environmental pollutants dihydroxybenzene isomers (hydroquinone (HQ), catechol (CC), and resorcinol (RS)). The impressive electrochemical activity of 3D-NC can be interpreted by its large specific surface area, continuous network-like morphology, superior electro-catalytic ability, and strong accumulation efficiency. Differential pulse voltammetry (DPV) test showed the 3D-NC-modified electrode exhibited three well-separated oxidation peaks at 0.05 V, 0.14 V, and 0.45 V vs. saturated calomel electrode (SCE) for HQ, CC, and RS, and their detection limits were evaluated to be as low as 0.0044, 0.012, and 0.016 mg L^-1, respectively. Finally, a novel electrochemical analytical platform is successfully fabricated for the simultaneous monitoring of hydroquinone, catechol, and resorcinol with high sensitivity. When used for real wastewater samples analysis, recovery ratio ranging from 94 to 108% with lower than 5% of relative standard deviation (RSD) values was achieved. This work proves a facile strategy to prepare morphology-controlled N-doped carbon-based material and demonstrates its high application potential for environmental monitoring and electrochemical analysis.

Preparation, Supramolecular Organization, and On-Surface Reactivity of Enantiopure Subphthalocyanines: From Bulk to 2D-Polymerization

The development of chiral materials is severely limited by the challenge to achieve enantiopure derivatives with both configurational stability and good optoelectronic properties. Herein we demonstrate that enantiopure subphthalocyanines (SubPcs) fulfill such demanding requirements and bear the prospect of becoming components of chiral technologies. Particularly, we describe the synthesis of enantiopure SubPcs and assess the impact of chirality on aspects as fundamental as the supramolecular organization, the behavior in contact with metallic surfaces, and the on-surface reactivity and polymerization. We find that enantiopure SubPcs remarkably tend to organize in columnar polar assemblies at the solid state and highly ordered chiral superstructures on Au(111) surfaces. At the metal interface, such SubPcs are singled out by scanning tunneling microscopy. DFT calculations suggest that SubPcs undergo a bowl-to-bowl inversion that was shown to be dependent on the axial substituent. Finally, we polymerize by means of on-surface synthesis a highly regular 2D, porous and chiral, π-extended polymer that paves the way to future nanodevice fabrication.

A Sandwich-Type Electrochemical Immunosensor for Insulin Detection Based on Au-Adhered Cu5 Zn8 Hollow Porous Carbon Nanocubes and AuNP Deposited Nitrogen-Doped Holey Graphene

Rapid, accurate, and sensitive insulin detection is crucial for managing and treating diabetes. A simple sandwich-type electrochemical immunosensor is engineered using gold nanoparticle (AuNP)-adhered metal-organic framework-derived copper-zinc hollow porous carbon nanocubes (Au@Cu₅ Zn₈ /HPCNC) and AuNP-deposited nitrogen-doped holey graphene (NHG) are used as a dual functional label and sensing platform. The results show that identical morphology and size of Au@Cu₅ Zn₈ /HPCNC enhance the electrocatalytic active sites, conductivity, and surface area to immobilize the detection antibodies (Ab₂ ). In addition, AuNP/NHG has the requisite biocompatibility and electrical conductivity, which facilitates electron transport and increases the surface area of the capture antibody (Ab₁ ). Significantly, Cu₅ Zn₈ /HPCNC exhibits necessary catalytic activity and sensitivity for the electrochemical reduction of H₂ O₂ using (i-t) amperometry and improves the electrochemical response in differential pulse voltammetry. Under optimal conditions, the immunosensor for insulin demonstrates a wide linear range with a low detection limit and viable specificity, stability, and reproducibility. The platform's practicality is evaluated by detecting insulin in human serum samples. All these characteristics indicate that the Cu₅ Zn₈ /HPCNC-based biosensing strategy may be used for the point-of-care assay of diverse biomarkers.

Excimer Laser Patterned Holey Graphene Oxide Films for Nonenzymatic Electrochemical Sensing

The existence of point defects, holes, and corrugations (macroscopic defects) induces high catalytic potential in graphene and its derivatives. We report a systematic approach for microscopic and macroscopic defect density optimization in excimer laser-induced reduced graphene oxide by varying the laser energy density and pulse number to achieve a record detection limit of 7.15 nM for peroxide sensing. A quantitative estimation of point defect densities was obtained using Raman spectroscopy and confirmed with electrochemical sensing measurements. Laser annealing (LA) at 0.6 J cm^-2 led to the formation of highly reduced graphene oxide (GO) by liquid-phase regrowth of molten carbon with the presence of dangling bonds, making it catalytically active. Hall-effect measurements yielded a mobility of ∼200 cm² V^-1 s^-1. An additional increase in the number of pulses at 0.6 J cm^-2 resulted in deoxygenation through the solid-state route, leading to the formation of holey graphene structure. The average hole size showed a hierarchical increase, with the number of pulses characterized with multiple microscopy techniques, including scanning electron microscopy, atomic force microscopy, and transmission electron microscopy. The exposure of edge sites due to high hole density after 10 pulses supported the formation of proximal diffusion layers, which led to facile mass transfer and improvement in the detection limit from 25.4 mM to 7.15 nM for peroxide sensing. However, LA at 1 J cm^-2 with 1 pulse resulted in a high melt lifetime of molten carbon and the formation of GO characterized by a high resistivity of 3 × 10^-2 Ω-cm, which was not ideal for sensing applications. The rapid thermal annealing technique using a batch furnace to generate holey graphene results in structure with uneven hole sizes. However, holey graphene formation using the LA technique is scalable with better control over hole size and density. This study will pave the path for cost-efficient and high-performance holey graphene sensors for advanced sensing applications.

Polyaniline inside the pores of high surface area mesoporous silicon as composite electrode material for supercapacitors

Mesoporous silicon (mSi) obtained by the magnesiothermic reduction of mesoporous silica was used to deposit polyaniline (PANI) in its pores, the composite was tested for its charge storage application for high performance supercapacitor electrodes. The mesoporous silica as confirmed by Small Angle X-ray Scattering (SAXS) has a Brunauer-Emmett-Teller (BET) surface area of 724 m2g-1 and mean pore size of 5 nm. After magnesiothermic reduction to mSi, the BET surface area is reduced to 348 m2g-1 but the mesoporousity is retained with a mean pore size of 10 nm. The BET surface area of mesoporous silicon is among the highest for porous silicon prepared/reduced from silica. In situ polymerization of PANI inside the pores of mSi was achieved by controlling the polymerization conditions. As a supercapacitor electrode, the mSi-PANI composite exhibits better charge storage performance as compared to pure PANI and mesoporous silica-PANI composite electrodes. Enhanced electrochemical performance of the mSi-PANI composite is attributed to the high surface mesoporous morphology of mSi with a network structure containing abundant mesopores enwrapped by an electrochemically permeable polyaniline matrix.

Holey and Wrinkled Flash Graphene from Mixed Plastic Waste

High surface area varieties of graphene have captured significant attention, allowing for improved performance in a variety of applications. However, there are challenges facing the use of graphene in these applications since it is expensive and difficult to synthesize in bulk. Here, we leverage the capabilities of flash Joule heating to synthesize holey and wrinkled flash graphene (HWFG) in seconds from mixed plastic waste feedstocks, using in situ salt decomposition to produce and stabilize pore formation during the reaction. Surface areas as high as 874 m² g^-1 are obtained, with characteristics of micro-, meso-, and macroporosities. Raman spectroscopy confirms the wrinkled and turbostratic nature of the HWFG. We demonstrate HWFG applications in its use as a metal-free hydrogen evolution reaction electrocatalyst, with excellent stability, competitive overpotential, and Tafel slope; in a Li-metal battery anode allowing for stable and high discharge rates; and in a material with high gas adsorption. This represents an upcycle of mixed plastic waste, thereby affording a valuable route to address this pressing environmental pollutant concern.

Optical and Material Characteristics of MoS2/Cu2O Sensor for Detection of Lung Cancer Cell Types in Hydroplegia

In this study, n-type MoS₂ monolayer flakes are grown through chemical vapor deposition (CVD), and a p-type Cu₂O thin film is grown via electrochemical deposition. The crystal structure of the grown MoS₂ flakes is analyzed through transmission electron microscopy. The monolayer structure of the MoS₂ flakes is verified with Raman spectroscopy, multiphoton excitation microscopy, atomic force microscopy, and photoluminescence (PL) measurements. After the preliminary processing of the grown MoS₂ flakes, the sample is then transferred onto a Cu₂O thin film to complete a p-n heterogeneous structure. Data are confirmed via scanning electron microscopy, SHG, and Raman mapping measurements. The luminous energy gap between the two materials is examined through PL measurements. Results reveal that the thickness of the single-layer MoS₂ film is 0.7 nm. PL mapping shows a micro signal generated at the 627 nm wavelength, which belongs to the B2 excitons of MoS₂ and tends to increase gradually when it approaches 670 nm. Finally, the biosensor is used to detect lung cancer cell types in hydroplegia significantly reducing the current busy procedures and longer waiting time for detection. The results suggest that the fabricated sensor is highly sensitive to the change in the photocurrent with the number of each cell, the linear regression of the three cell types is as high as 99%. By measuring the slope of the photocurrent, we can identify the type of cells and the number of cells.

3D Continuously Porous Graphene for Energy Applications

Constructing bulk graphene materials with well-reserved 2D properties is essential for device and engineering applications of atomically thick graphene. In this article, the recent progress in the fabrications and applications of sterically continuous porous graphene with designable microstructures, chemistries, and properties for energy storage and conversion are reviewed. Both template-based and template-free methods have been developed to synthesize the 3D continuously porous graphene, which typically has the microstructure reminiscent of pseudo-periodic minimal surfaces. The 3D graphene can well preserve the properties of 2D graphene of being highly conductive, surface abundant, and mechanically robust, together with unique 2D electronic behaviors. Additionally, the bicontinuous porosity and large curvature offer new functionalities, such as rapid mass transport, ample open space, mechanical flexibility, and tunable electric/thermal conductivity. Particularly, the 3D curvature provides a new degree of freedom for tailoring the catalysis and transport properties of graphene. The 3D graphene with those extraordinary properties has shown great promises for a wide range of applications, especially for energy conversion and storage. This article overviews the recent advances made in addressing the challenges of developing 3D continuously porous graphene, the benefits and opportunities of the new materials for energy-related applications, and the remaining challenges that warrant future study.

Graphene-Based Nanomaterials for Dental Applications: Principles, Current Advances, and Future Outlook

With the development of nanotechnology, nanomaterials have been used in dental fields over the past years. Among them, graphene and its derivatives have attracted great attentions, owing to their excellent physicochemical property, morphology, biocompatibility, multi-differentiation activity, and antimicrobial activity. In our review, we summarized the recent progress about their applications on the dentistry. The synthesis methods, structures, and properties of graphene-based materials are discussed. Then, the dental applications of graphene-based materials are emphatically collected and described. Finally, the challenges and outlooks of graphene-based nanomaterials on the dental applications are discussed in this paper, aiming at inspiring more excellent studies.

Multifunctional carbon nanomaterials for diagnostic applications in infectious diseases and tumors

Infectious diseases (such as Corona Virus Disease 2019) and tumors pose a tremendous challenge to global public health. Early diagnosis of infectious diseases and tumors can lead to effective control and early intervention of the patient's condition. Over the past few decades, carbon nanomaterials (CNs) have attracted widespread attention in different scientific disciplines. In the field of biomedicine, carbon nanotubes, graphene, carbon quantum dots and fullerenes have the ability of improving the accuracy of the diagnosis by the improvement of the diagnostic approaches. Therefore, this review highlights their applications in the diagnosis of infectious diseases and tumors over the past five years. Recent advances in the field of biosensing, bioimaging, and nucleic acid amplification by such CNs are introduced and discussed, emphasizing the importance of their unique properties in infectious disease and tumor diagnosis and the challenges and opportunities that exist for future clinical applications. Although the application of CNs in the diagnosis of several diseases is still at a beginning stage, biosensors, bioimaging technologies and nucleic acid amplification technologies built on CNs represent a new generation of promising diagnostic tools that further support their potential application in infectious disease and tumor diagnosis.

Recent progress in the development of porous carbon-based electrodes for sensing applications

Electrochemical (bio)sensors are considered clean and powerful analytical tools capable of converting an electrochemical reaction between analytes and electrodes into a quantitative signal. They are an important part of our daily lives integrated in various fields such as healthcare, food and environmental monitoring. Several strategies including the incorporation of porous carbon materials in its configuration have been applied to improve their sensitivity and selectivity in the last decade. The porosity, surface area, graphitic structure as well as chemical composition of materials greatly influence the electrochemical performance of the sensors. In this review, activated carbons, ordered mesoporous carbons, graphene-based materials, and MOF-derived carbons, which are used to date as crucial elements of electrochemical devices, are described, starting from their textural and chemical compositions to their role in the outcome of electrochemical sensors. Several relevant and meaningful examples about material synthesis, sensor fabrication and applications are illustrated and described. The closer perspectives of these fascinating materials forecast a promising future for the electrochemical sensing field.

Bamboo Weaving Inspired Design of a Carbonaceous Electrode with Exceptionally High Volumetric Capacity

A highly densified electrode material is desirable to achieve large volumetric capacity. However, pores acting as ion transport channels are critical for high utilization of active material. Achieving a balance between high volume density and pore utilization remains a challenge particularly for hollow materials. Herein, capillary force is employed to convert hollow fibers to a bamboo-weaving-like flexible electrode (BWFE), in which the shrinkage of hollow space results in high compactness of the electrode. The volume of the electrode can be decreased by 96% without sacrificing the gravimetric capacity. Importantly, the conductivity of BWFE after thermal treatment can reach up to 50,500 S/m which exceeds that for most other carbon materials. Detailed mechanical analysis reveals that, due to the strong interaction between nanoribbons, Young's modulus of the electrode increases by 105 times. After SnO₂ active materials is impregnated, the BWFE/SnO₂ electrode exhibits an exceptionally ultrahigh volumetric capacity of 2000 mAh/cm³.

Growth Mechanism of Periodic-Structured MoS2 by Transmission Electron Microscopy

Molybdenum disulfide (MoS₂) was grown on a laser-processed periodic-hole sapphire substrate through chemical vapor deposition. The main purpose was to investigate the mechanism of MoS₂ growth in substrate with a periodic structure. By controlling the amount and position of the precursor, adjusting the growth temperature and time, and setting the flow rate of argon gas, MoS₂ grew in the region of the periodic holes. A series of various growth layer analyses of MoS₂ were then confirmed by Raman spectroscopy, photoluminescence spectroscopy, and atomic force microscopy. Finally, the growth mechanism was studied by transmission electron microscopy (TEM). The experimental results show that in the appropriate environment, MoS₂ can be successfully grown on substrate with periodic holes, and the number of growth layers can be determined through measurements. By observing the growth mechanism, composition analysis, and selected area electron diffraction diagram by TEM, we comprehensively understand the growth phenomenon. The results of this research can serve as a reference for the large-scale periodic growth of MoS₂. The production of periodic structures by laser drilling is advantageous, as it is relatively simpler than other methods.

Carbon-based aerogels for biomedical sensing: Advances toward designing the ideal sensor

Carbon based aerogels are special solid-state materials comprised of interconnected networks of 3D nanostructures with high amount of air-filled nanoporous. They expand the structural properties along with physicochemical characteristics of nanoscale construction blocks to macroscale, and incorporate distinctive attributes of aerogels, like large surface area, high porosity, and low density, with particular features of the different constituents. These features impart aerogels with rapid response signal, high selectivity, and ultra-sensitivity for sensing diverse targets in biomedical media. This has prompted researchers to develop a variety of aerogel-based sensors with encouraging achievements. Hence, this work outlines sensing applications of aerogel-based sensors with a comprehensive overview on the carbon aerogel hybrid materials and their analytical performances. Authors tried to list advantages and limitations of the developed approach and introduced more potent research for possible devices designing. We also point out some challenges and future perspectives related to the improvement of high-efficiency aerogel-based sensors.

2D materials for bone therapy

Due to their prominent physicochemical properties, 2D materials are broadly applied in biomedicine. Currently, 2D materials have achieved great success in treating many diseases such as cancer and tissue engineering as well as bone therapy. Based on their different characteristics, 2D materials could function in various ways in different bone diseases. Herein, the application of 2D materials in bone tissue engineering, joint lubrication, infection of orthopedic implants, bone tumors, and osteoarthritis are firstly reviewed comprehensively together. Meanwhile, different mechanisms by which 2D materials function in each disease reviewed below are also reviewed in detail, which in turn reveals the versatile functions and application of 2D materials. At last, the outlook on how to further broaden applications of 2D materials in bone therapies based on their excellent properties is also discussed.

The construction of bio-inspired hierarchically porous graphene aerogel for efficiently organic pollutants absorption

Three-dimensional graphene aerogel shows a wide application in many frontier domains, which have attracted extensive research interest owing to its large specific surface area and high porosity. However, it is still a great challenge to construct the ideal hierarchical pore structure while guaranteeing excellent absorption and mechanical performance. In this paper, inspired by the bio-based porous material, a hierarchical graphene aerogel with inter-connected micro-/nano-scale pore structure was constructed. The micro and nano-scale pores are generated by the bubble and nanoparticles (NPs) template, respectively. The resulting graphene aerogel (GA) presents low density, increased interfacial areas, high mechanical performance, and excellent absorption performance towards a mass of organic solvents. In combination with its high compressibility, a diverse organic solvent can be absorbed efficiently and recycled by extrusion conveniently. Besides, owing to the scattered hydrophilic sites of functional groups and NPs on the surface of GA-b/NP, it shows high adhesion properties for water droplets, thus presents great potential in high-efficiency fog collecting materials. In a word, the proposed approach presents a novel strategy for the construction of the hierarchical aerogel with light-weight and elasticity, as well as the achievement of efficient functionalization, which has great potential for the preparation of diverse functional composites.

Edge-Rich Reduced Graphene Oxide Embedded in Silica-Based Laminated Ceramic Composites for Efficient and Robust Electrocatalytic Hydrogen Evolution

To mitigate the energy crisis and environmental pollution, efficient and earth-abundant hydrogen evolution reaction (HER) electrocatalysts are essential for hydrogen production through electrochemical water splitting. Graphene-based materials as metal-free catalysts have attracted significant attention but suffer from insufficient activity and stability. Therefore, a novel and economical approach is developed to prepare highly active, robust, and self-supported reduced graphene oxide (rGO)/SiO₂ ceramic composites as electrocatalysts in HER. Through intercalation and pressure sintering, the rGO sheets are parallelly aligned and embedded into a dense and chemically inert SiO₂ matrix, ensuring the electrical conductivity and stability of the prepared composites. After directional cutting, the edges of the oriented rGO sheets become fully exposed on the composite surface, acting as highly electrocatalytic active sites in HER, as confirmed by density functional theory calculations. The 4 vol% rGO/SiO₂ composite displays superior electrocatalytic performance, featuring a low overpotential (134 mV) at a current density of 10 mA cm^-2 , a small Tafel slope (103 mV dec^-1 ), and excellent catalytic durability in 0.5 m H₂ SO₄ . This study provides a new yet cost-effective strategy to prepare metal-free, robust, and edge-rich rGO/ceramic composites as a highly electrocatalytic active catalyst for HER applications.

Enzyme-Free Molecularly Imprinted and Graphene-Functionalized Photoelectrochemical Sensor Platform for Pollutants

In this work, a label-free nonenzymatic photoelectrochemical (PEC) sensor is successfully developed for the detection of a typical pollutant, microcystin-LR (MC-LR), based on a visible-light-responsive alloy oxide, with highly ordered and vertically aligned Ti-Fe-O nanotubes (NTs) as substrates. Ti-Fe-O NTs consisting mainly of TiO₂ and atomically doped Fe₂O₃ are in situ prepared on a Ti-Fe alloy by electrochemical anodic oxidation. Using a simple electrochemical deposition technique, reduced graphene oxide (RGO) could be grown onto Ti-Fe-O NTs, exhibiting significant bifunctions. It not only provides an ideal microenvironment for functionalization of molecularly imprinted polymers (MIPs) on the surface but also serves as the PEC signal amplification element because of its outstanding conductivity for photons and electrons. The designed MIP/RGO/Ti-Fe-O NT PEC sensor exhibits high sensitivity toward MC-LR with a limit of detection as low as 10 pM. High selectivity toward MC-LR is also proven for the sensor. A promising detection platform not only for MC-LR but also for other pollutants has therefore been provided.

Synthesis of holey graphene for advanced nanotechnological applications

Holey or porous graphene, a structural derivative of graphene, has attracted immense attention due to its unique properties and potential applications in different branches of science and technology. In this review, the synthesis methods of holey or porous graphene/graphene oxide are systematically summarized and their potential applications in different areas are discussed. The process-structure-applications are explained, which helps relate the synthesis approaches to their corresponding key applications. The review paper is anticipated to benefit the readers in understanding the different synthesis methods of holey graphene, their key parameters to control the pore size distribution, advantages and limitations, and their potential applications in various fields.

Fabrication, Modification, and Characterization of Lignin-Based Electrospun Fibers Derived from Distinctive Biomass Sources

From the environmental point of view, there is high demand for the preparation of polymeric materials for various applications from renewable and/or waste sources. New lignin-based spun fibers were produced, characterized, and probed for use in methylene blue (MB) dye removal in this study. The lignin was extracted from palm fronds (PF) and banana bunch (BB) feedstock using catalytic organosolv treatment. Different polymer concentrations of either a plasticized blend of renewable polymers such as polylactic acid/polyhydroxybutyrate blend (PLA-PHB-ATBC) or polyethylene terephthalate (PET) as a potential waste material were used as matrices to generate lignin-based fibers by the electrospinning technique. The samples with the best fiber morphologies were further modified after iodine handling to ameliorate and expedite the thermostabilization process. To investigate the adsorption of MB dye from aqueous solution, two approaches of fiber modification were utilized. First, electrospun fibers were carbonized at 500 °C with aim of generating lignin-based carbon fibers with a smooth appearance. The second method used an in situ oxidative chemical polymerization of m-toluidine monomer to modify electrospun fibers, which were then nominated by hybrid composites. SEM, TGA, FT-IR, BET, elemental analysis, and tensile measurements were employed to evaluate the composition, morphology, and characteristics of manufactured fibers. The hybrid composite formed from an OBBL/PET fiber mat has been shown to be a promising adsorbent material with a capacity of 9 mg/g for MB dye removal.

Nitrogen and Sulfur Co-Doped Graphene as Efficient Electrode Material for L-Cysteine Detection

Two graphene samples co-doped with nitrogen and sulfur were synthesized by the hydrothermal method using thiourea as doping and reducing agent for graphene oxide (GO). An appropriate amount of thiourea was added to the aqueous dispersion of GO, previously sonicated for 30 min. The mixture was poured into an autoclave and placed in the oven for 3 h, at 120 and 200 °C. The samples were denoted NSGr-120 and NSGr-200, respectively, in agreement with the reaction temperatures. They were next morphologically and structurally characterized by advanced techniques, such as SEM/TEM, XPS, XRD, and FTIR. According to XPS analysis, the NSGr-120 sample has higher amounts of heteroatoms in comparison with NSGr-200, indicating that the reaction temperature is a crucial factor that affects the doping degree. In order to reveal the influence of the doping degree on the electrochemical performances of graphene-modified electrodes, they were tested in solutions containing L-cysteine molecules. The electrode with the best electrocatalytic performances, GC/NSGr-120, was tested to detect L-cysteine in a pharmaceutical drug, proving its applicability in real sample analysis.

The implementation of graphene-based aerogel in the field of supercapacitor

Graphene and graphene-based hybrid materials have emerged as an outstanding supercapacitor electrode material primarily because of their excellent surface area, high electrical conductivity, and improved thermal, mechanical, electrochemical cycling stabilities. Graphene alone exhibits electric double layer capacitance (EDLC) with low energy density and high power density. The use of aerogels in a supercapacitor is a pragmatic approach due to its extraordinary properties like ultra-lightweight, high porosity and specific surface area. The aerogels encompass a high volume of pores which leads to easy soak by the electrolyte and fast charge-discharge process. Graphene aerogels assembled into three-dimensional (3D) architecture prevent there stacking of graphene sheets and maintain the high surface area and hence excellent cycling stability and rate capacitance. However, the energy density of graphene aerogels is limited due to EDLC type of charge storage mechanism. Consequently, 3D graphene aerogel coupled with pseudocapacitive materials such as transition metal oxides, metal hydroxides, conducting polymers, nitrides, chalcogenides show an efficient energy density and power density performance due to the presence of both types of charge storage mechanisms. This laconic review focuses on the design and development of graphene-based aerogel in the field of the supercapacitor. This review is an erudite article about methods, technology and electrochemical properties of graphene aerogel.

Three-Dimensional Graphene-Based Macrostructures for Electrocatalysis

Electrochemical energy storage and conversion is an effective strategy to relieve the increasing energy and environment crisis. The sluggish reaction kinetics in the related devices is one of the major obstacles for them to realize practical applications. More efforts should be devoted to searching for high-efficiency electrocatalysts and enhancing the electrocatalytic performance. 3D graphene macrostructures (3D GMs) are one kind of porous crystalline materials with 3D structures at both micro- and macro-scale. The unique structure can achieve large accessible surface area, expose many active sites, promote fast mass/electron transport, and provide wide room for further functional modification. All these features make them promising candidates for electrocatalysis. In this review, the authors focus on the latest progress of 3D GMs for electrocatalysis. First, the preparation methods of 3D GMs are introduced followed by the strategies for functional modifications. Then, their electrocatalytic performances are discussed in detail including monofunctional and bifunctional electrocatalysis. The electrocatalytic processes involve oxygen reduction reaction, oxygen evolution reaction, hydrogen evolution reaction, and carbon dioxide reduction reaction. Finally, the challenges and perspectives are presented to offer a guideline for the exploration of excellent 3D GM-based electrocatalysts.

Adsorption, Gas-Sensing, and Optical Properties of Molecules on a Diazine Monolayer: A First-Principles Study

Using first-principles calculations, the structural, electronic, and optical properties of CO2, CO, N2O, CH4, H2, N2, O2, NH3, acetone, and ethanol molecules adsorbed on a diazine monolayer were studied to develop the application potential of the diazine monolayer as a room-temperature gas sensor for detecting acetone, ethanol, and NH3. We found that these molecules are all physically adsorbed on the diazine monolayer with weak adsorption strength and charge transfer between the molecules and the monolayer, but the physisorption of only NH3, acetone, and ethanol remarkably modified the electronic properties of the diazine monolayer, especially for the obvious change in electric conductivity, showing that the diazine monolayer is highly sensitive to acetone, NH3, and ethanol. Further, the adsorption of NH3, acetone, and ethanol molecules remarkably modifies, in varying degrees, the optical properties of the diazine monolayer, such as work function, absorption coefficient, and the reflectivity, whereas adsorption of other molecules has infinitesimal influence. The different adsorption behaviors and influences of the electronic and optical properties of molecules on the monolayer show that the diazine monolayer has high selectivity to NH3, acetone, and ethanol. The recovery time of NH3, acetone, and ethanol molecules is, respectively, 1.2 μs, 7.7 μs, and 0.11 ms at 300 K. Thus, the diazine monolayer has a high application potential as a room-temperature acetone, ethanol, and NH3 sensor with high performance (high selectivity and sensitivity, and rapid recovery time).