Rationalizing the Effect of Oxygen Vacancy on Oxygen Electrocatalysis in Li-O2 Battery

A review on defect modulated electrocatalysts for the oxygen evolution reaction

The oxygen evolution reaction (OER) is crucial for applications such as water splitting and rechargeable metal-air batteries. Recent research has focused on improving the activity and stability of OER electrocatalysts through various strategies including structural innovation, heteroatom doping, and conductivity enhancement. Among these, defect engineering has proved particularly effective, allowing precise modulation of the materials' electronic structure at the atomic level. This review addresses defect-rich materials that exhibit superior electrochemical properties for OER applications, with a particular focus on developments from the past five years. The discussion starts with an overview of the OER catalytic mechanism and then delves into the types of defects, synthesis methods, and their impact on electrochemical performance. This review concludes with insights into the rational design and synthesis of advanced electrocatalysts, aiming to improve efficiency and extend operational longevity. The objective is to highlight approaches for creating high-performance OER electrocatalysts that outperform noble-metal based systems in both activity and stability.

Enthralling Anodic Protection by Molybdate on High-Entropy Alloy-Based Electrocatalyst for Sustainable Seawater Oxidation

Efficient and sustainable seawater electrolysis is still limited due to the interference of chloride corrosion at the anode. The designing of suitable electrocatalysts is one of the crucial ways to boost electrocatalytic activity. However, the approach may fall short as achieving high current density often occurs in chlorine evolution reaction (CER)-dominating potential regions. Thereby, apart from developing an OER-active high-entropy alloy-based electrocatalyst, the present study also offers a unique way to protect anode surface under high current density or potential by using MoO4 2- as an effective inhibitor during seawater oxidation. The wide variation of d-band center of high-entropy alloy-based electrocatalyst allows great oxygen evolution reaction (OER) proficiency exhibiting an overpotential of 230 mV at current density of 20 mA cm-2. Besides, the electrocatalyst demonstrates impressive stability over 500 h at high current density of 1 A cm-2 or at a high oxidation potential of 2.0 V versus RHE in the presence of a molybdate inhibitor. Theoretical and experimental studies reveal MoO4 2- electrostatically accumulated at anode surface due to higher adsorption ability, thereby creating a protective layer against chlorides without affecting OER.

Silver nanoparticle-decorated NiFe2O4/CuWO4 heterostructure electrocatalyst for oxygen evolution reactions

In this work, Ag nanoparticles decorated with NiFe2O4/CuWO4 heterostructure were synthesized using the step-wise precipitation method. The influence of varying Ag loading on the NiFe2O4/CuWO4 heterostructure and its electrochemical OER performance was extensively studied in 1 M KOH electrolyte. The obtained LSV profile was analyzed to determine the overpotential, Tafel slope, and onset potential. The heterostructure with an optimal Ag loading of 5 wt% required the least overpotential (1.60 V vs. RHE) for generating a current density of 10 mA cm-2 with a lower Tafel slope of 44.5 mV dec-1, indicating its faster OER kinetics. Furthermore, the composite remained stable over a period of 24 hours with a minimum rise in the overpotential after the stability test. The enhanced OER performance of the as-prepared catalyst can be attributed to the presence of multiple metallic elements in the Ag-loaded NiFe2O4/CuWO4 composite, which created a diverse array of oxygen-vacant sites with varying reactivity, enhancing the charge-transfer kinetics; and thus contributing to the overall efficiency of OER. Therefore, optimizing the Ag concentration and engineering a microstructure represents an encouraging strategy for developing cost-effective catalysts for next-generation energy-conversion applications.

Vacancy-Driven High-Performance Metabolic Assay for Diagnosis and Therapeutic Evaluation of Depression

Depression is one of the most common mental illnesses and is a well-known risk factor for suicide, characterized by low overall efficacy (<50%) and high relapse rate (40%). A rapid and objective approach for screening and prognosis of depression is highly desirable but still awaits further development. Herein, a high-performance metabolite-based assay to aid the diagnosis and therapeutic evaluation of depression by developing a vacancy-engineered cobalt oxide (Vo-Co3O4) assisted laser desorption/ionization mass spectrometer platform is presented. The easy-prepared nanoparticles with optimal vacancy achieve a considerable signal enhancement, characterized by favorable charge transfer and increased photothermal conversion. The optimized Vo-Co3O4 allows for a direct and robust record of plasma metabolic fingerprints (PMFs). Through machine learning of PMFs, high-performance depression diagnosis is achieved, with the areas under the curve (AUC) of 0.941-0.980 and an accuracy of over 92%. Furthermore, a simplified diagnostic panel for depression is established, with a desirable AUC value of 0.933. Finally, proline levels are quantified in a follow-up cohort of depressive patients, highlighting the potential of metabolite quantification in the therapeutic evaluation of depression. This work promotes the progression of advanced matrixes and brings insights into the management of depression.

First Principles Study of the Structure-Performance Relation of Pristine Wn+1Cn and Oxygen-Functionalized Wn+1CnO2 MXenes as Cathode Catalysts for Li-O2 Batteries

Li-O2 batteries are considered a highly promising energy storage solution. However, their practical implementation is hindered by the sluggish kinetics of the oxygen reduction (ORR) and oxygen evolution (OER) reactions at cathodes during discharging and charging, respectively. In this work, we investigated the catalytic performance of Wn+1Cn and Wn+1CnO2 MXenes (n = 1, 2, and 3) as cathodes for Li-O2 batteries using first principles calculations. Both Wn+1Cn and Wn+1CnO2 MXenes show high conductivity, and their conductivity is further enhanced with increasing atomic layers, as reflected by the elevated density of states at the Fermi level. The oxygen functionalization can change the electronic properties of WC MXenes from the electrophilic W surface of Wn+1Cn to the nucleophilic O surface of Wn+1CnO2, which is beneficial for the activation of the Li-O bond, and thus promotes the Li+ deintercalation during the charge-discharge process. On both Wn+1Cn and Wn+1CnO2, the rate-determining step (RDS) of ORR is the formation of the (Li2O)2* product, while the RDS of OER is the LiO2* decomposition. The overpotentials of ORR and OER are positively linearly correlated with the adsorption energy of the RDS LixO2* intermediates. By lowering the energy band center, the oxygen functionalization and increasing atomic layers can effectively reduce the adsorption strength of the LixO2* intermediates, thereby reducing the ORR and OER overpotentials. The W4C3O2 MXene shows immense potential as a cathode catalyst for Li-O2 batteries due to its outstanding conductivity and super-low ORR, OER, and total overpotentials (0.25, 0.38, and 0.63 V).

p-d Orbital Hybridization-Engineered PdSn Nanozymes for a Sensitive Immunoassay

Nanozymes with peroxidase-like activity have been extensively studied for colorimetric biosensing. However, their catalytic activity and specificity still lag far behind those of natural enzymes, which significantly affects the accuracy and sensitivity of colorimetric biosensing. To address this issue, we design PdSn nanozymes with selectively enhanced peroxidase-like activity, which improves the sensitivity and accuracy of a colorimetric immunoassay. The peroxidase-like activity of PdSn nanozymes is significantly higher than that of Pd nanozymes. Theoretical calculations reveal that the p-d orbital hybridization of Pd and Sn not only results in an upward shift of the d-band center to enhance hydrogen peroxide (H2O2) adsorption but also regulates the O-O bonding strength of H2O2 to achieve selective H2O2 activation. Ultimately, the nanozyme-linked immunosorbent assay has been successfully developed to sensitively and accurately detect the prostate-specific antigen (PSA), achieving a low detection limit of 1.696 pg mL-1. This work demonstrates a promising approach for detecting PSA in a clinical diagnosis.

Symbiotic strategy of Cu on CuFe2O4 realizing high-efficiency electromagnetic wave absorption

Low complex permittivity and easy magnetic agglomeration prevent ferrites from achieving high-efficiency electromagnetic wave (EMW) absorption owing to the resultant narrow absorption bandwidth. Existing composition- and morphology-controlled strategies have made limited progress in fundamentally improving the intrinsic complex permittivity and absorption performance of pure ferrite. In this study, Cu/CuFe₂O₄ composites were synthesized using a facile and low-energy sol-gel self-propagating combustion, and the metallic Cu content was adjusted by changing the ratio of the reductant (citric acid) to the oxidant (ferric nitrate). The symbiosis and coexistence of metallic Cu with ferritic CuFe₂O₄ increases the intrinsic complex permittivity of CuFe₂O₄, which can be regulated by changing the metallic Cu content_. Moreover, the unique ant-nest-like microstructure overcomes the issue of magnetic agglomeration. Because of the favorable impedance matching and strong dielectric loss (interfacial polarization and conduction loss) provided by the moderate metallic Cu content, S0.5 concurrently displays broadband absorption with an effective absorption bandwidth (EAB) of 6.32 GHz at an ultrathin thickness of 1.7 mm and strong absorption relying on minimum reflection loss (RL_min) of -48.81 dB at 4.08 GHz and 4.0 mm. This study provides a new perspective for improving the EMW absorption performance of ferrites.

Chromium-doped inverse spinel electrocatalysts with optimal orbital occupancy for facilitating reaction kinetics of lithium-oxygen batteries

Tailored electrocatalysts that can modulate their electronic structure are highly desirable to facilitate the reaction kinetics of oxygen evolution reaction (OER) and oxidation reduction reaction (ORR) in lithium-oxygen batteries (LOB). Although octahedron predominant inverse spinels (e.g., CoFe₂O₄) have been proposed as promising candidates for catalytic reactions, their performance has remained unsatisfactory. Herein, the chromium (Cr) doped CoFe₂O₄ nanoflowers (Cr-CoFe₂O₄) are elaborately constructed on nickel foam as a bifunctional electrocatalyst that drastically improves the performance of LOB. The results show that the partially oxidized Cr⁶⁺ stabilizes the cobalt (Co) sites at high-valence and regulates the electronic structure of Co sites, facilitating the oxygen redox kinetics of LOB due to their strong electron-withdrawing capability. Moreover, DFT calculations and ultraviolet photoelectron spectrometer (UPS) results consistently demonstrate that Cr doping optimizes the e_g electron filling state of the active octahedral Co sites, significantly improves the covalency of Co-O bonds, and enhances the degree of Co 3d-O 2p hybrids. As a result, Cr-CoFe₂O₄ catalyzed LOB can achieve low overpotential (0.48 V), high discharge capacity (22030 mA h g^-1) and long-term cycling durability (over 500 cycles at 300 mA g^-1). This work promotes the oxygen redox reaction and accelerates the electron transfer between Co ions and oxygen-containing intermediates, highlighting the potential of Cr-CoFe₂O₄ nanoflowers as bifunctional electrocatalysts for LOB.

Modulating Electronic Structure with Copper Doping to Promote the Electrocatalytic Performance of Cobalt Disulfide in Li-O2 Batteries

Introducing heteroatom into catalyst lattice to modulate its intrinsic electronic structure is an efficient strategy to improve the electrocatalytic performance in Li-O₂ batteries. Herein, Cu-doped CoS₂ (Cu-CoS₂ ) nanoparticles are fabricated by a solvothermal method and evaluated as promising cathode catalysts for Li-O₂ batteries. Based on physicochemical analysis as well as density functional theory calculations, it is revealed that doping Cu heteroatom in CoS₂ lattice can increase the covalency of the CoS bond with more electron transfer from Co 3d to S 3p orbitals, thereby resulting in less electron transfer from Co 3d to O 2p orbitals of Li-O species, which can weaken the adsorption strength toward Li-O intermediates, decrease the reaction barrier, and thus improve the catalytic performance in Li-O₂ batteries. As a result, the battery using Cu-CoS₂ nanoparticles in the cathode exhibits superior kinetics, reversibility, capacity, and cycling performance, as compared to the battery based on CoS₂ catalyst. This work provides an atomic-level insight into the rational design of transition-metal dichalcogenide catalysts via regulating the electronic structure for high-performance Li-O₂ batteries.

Single-Atom Pd-N4 Catalysis for Stable Low-Overpotential Lithium-Oxygen Battery

The critical challenge for Li-O₂ batteries lies in the large charge overpotential, leading to undesirable side reactions and inferior cycle stability. Single-atom catalysts have shown promising prospects in expediting the kinetics of oxygen evolution reaction (OER) for Li-O₂ batteries. However, a present practical drawback is the limited understanding of the correlation between the unique atomic structures and the OER mechanism. Herein, a template-assisted strategy is reported to synthesize atomically dispersed Pd anchored on N-doped carbon spheres as cathode catalysts. Benefiting from the well-defined Pd-N₄ moiety, the morphology and distribution of Li₂ O₂ products are distinctly regulated with optimized decomposition reversibility. Theoretical simulations reveal that the unique configuration of Pd-N₄ will contribute to the electron transfer from Pd atoms to the adjacent N atoms, which turns the originally electroneutral Pd into positively charged and downshifts the d-band center and therefore weakens its adsorption energy with the intermediates. The Li-O₂ batteries with Pd SAs/NC cathode achieve a charge overpotential of only 0.24 V and sustainable low-overpotential cycling stability (500 mA g^-1 ), and can retain a low charge voltage to a very high capacity of 10 000 mAh g^-1 . This work provides some insights into designing efficient single-atom catalysts for stable low-overpotential Li-O₂ batteries.

Constructing oxygen vacancy-rich MXene @Ce-MOF composites for enhanced energy storage and conversion

Oxygen vacancies can regulate the coordination structure and electronic states of atoms, thus promoting the formation of surface-active sites and increasing the conductivity of the electrode material. This work presents a design for MXene@Ce-MOF composites with abundant oxygen vacancies. The hydroxyl groups on the surface of monolayer MXene attract cerium ions, which create surface defects in Ce-MOF and further promote the formation of oxygen vacancies. This results in a significant improvement in energy storage capacity, as well as performance in oxygen evolution reaction (OER) and hydrogen evolution reaction (HER). The MXene@Ce-MOF composite exhibits a specific capacity of 496 F g^-1, which is 1.8 times higher than that of pure Ce-MOF and 3.5 times higher than MXene alone. At a current density of 10 mA cm^-2, the overpotential for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) is as low as 270 and 220 mV, respectively, and the composite exhibits excellent cycling stability. Oxygen vacancy-based MOF composites play a crucial role in electrocatalysis and energy conversion.

Covalent organic frameworks with Ni-Bis(dithiolene) and Co-porphyrin units as bifunctional catalysts for Li-O2 batteries

The rational design of efficient and stable catalysts for the oxygen reduction reaction and oxygen evolution reaction (ORR/OER) is the key to improving Li-O₂ battery performance. Here, we report the construction of ORR/OER bifunctional cathode catalysts in a covalent organic framework (COF) platform by simultaneously incorporating Ni-bis(dithiolene) and Co-porphyrin units. The resulting bimetallic Ni/Co-COF exhibits high surface area, fairly good electrical conductivity, and excellent chemical stability. Li-O₂ batteries with the Ni/Co-COF-based cathode show a low discharge/charge potential gap (1.0 V) and stable cycling (200 cycles) at a current density of 500 mA g^-1, rivaling that of PtAu nanocrystals. Density functional theory computations and control experiments using nonmetal or single metal-based isostructural COFs reveal the critical role of Ni and Co sites in reducing the discharge/charge overpotentials and regulating the Li₂O₂ deposition. This work highlights the advantage of bimetallic COFs in the rational design of efficient and stable Li-O₂ batteries.

First principles investigation on Na-ion storage in two-dimensional boron-rich B2N, B3N, and B5N

Na-ion batteries (SIBs) are emerging as a promising alternative to Li-ion batteries for large-scale energy storage in light of abundant Na resources and their low cost. Development of appropriate electrode materials that can conquer some critical issues such as low theoretical storage capacity and sluggish redox kinetics resulting from the larger radius of Na is urgently needed for their practical applications. In this work, boron-rich 2D B_xN (x = 2, 3, and 5) has been explored as promising anode materials for high-performance SIBs based on density functional theory calculations. B_xN electrodes exhibit moderate affinity toward Na-ions with adsorption energies of -0.41 to -1.21 eV, which allows stable Na-ion intercalation without the formation of metal dendrites. Moreover, both B₃N and B₅N deliver low diffusion barriers (0.28 and 0.08 eV) for Na-ion migration, guaranteeing a high charging/discharging rate. More importantly, these B_xN anodes exhibit not only a remarkably high theoretical capacity of 1129-1313 mA h g^-1 but also a low open-circuit voltage (0.45-0.87 V), which is important to achieve high energy density. AIMD simulations have confirmed the excellent cyclability of B_xN electrodes during reversible lithiation/delithiation. These results suggested that the B_xN electrode could be used as a new lightweight SIB anode with high capacity, cyclability, and desired rate performance.

Interfacial Engineering of Co3 O4 /Fe2 O3 Nano-Heterostructure Toward Superior Li-O2 Batteries

A major issue with Li-O₂ batteries is their slow oxygen reduction and evolution kinetics, necessitating catalysts with high catalytic activity to improve reaction kinetics and cycle stability. Herein, a nano-heterostructured catalyst composed of Co₃ O₄ and Fe₂ O₃ (Co₃ O₄ /Fe₂ O₃ ) with a porous rod morphology is achieved through an interfacial engineering strategy by constructing Fe₂ O₃ on the Co₃ O₄ surface, which can function as a high-performance cathode in order to efficiently encourage the oxygen reduction and evolution while also reduce the battery polarization during charging and discharging. The density functional theory (DFT) calculations show the differences in charge density at the interface of nano-heterostructures, demonstrating the occurrence of an electron transfer process in the interface region of Co₃ O₄ and Fe₂ O₃ , implying a strong electronic coupling transfer, and in turn changing the electronic structure of the Co₃ O₄ . This significantly reduces the adsorption energy of LiO₂ intermediates, thereby effectively lowering the overpotential. The resultant Li-O₂ battery has larger discharge specific capacity, lower overpotential for the efficient oxygen evolution/reduction, as well as good cycling stability of 280 cycles. This work demonstrates an effective method to fabricate the nano-heterostrucutred materials with enhanced catalytic efficiency for advanced energy applications.

Engineering the Structural Defects of Spinel Oxide Nanoneedles by Doping of V for a Highly Efficient Oxygen Evolution Reaction

Rational design of multi-structural defects in the transition-metal oxides is a very alluring and challenging strategy to significantly improve its oxygen evolution reaction (OER) performance. Herein, a simple and promising element doping approach is demonstrated to fabricate a poor-crystalline V-doping CuCo2O4 (V-CuCo2O4) nanoneedle with rich oxygen vacancies (Vo), partially amorphous phase, and Co2+ defects on the carbon fiber (CF) (V-CuCo2O4/CF). The results indicate that the V doping could further weaken the crystallinity of V-CuCo2O4, providing the thoroughfares for the convenience of electrolyte penetration and the exposure of active sites. Meanwhile, [CoO6] octahedron in the V-CuCo2O4 lattice is gravely distorted due to a strong electronic interaction between the doped V and Co atoms, creating more Co2+ active species. With the merits of these multiple structural defects, V-CuCo2O4/CF exhibits rich active sites, and its intrinsically electrocatalytic activity is significantly enhanced. The optimized V-CuCo2O4/CF electrocatalyst has a significantly enhanced OER activity with a required low overpotential of ∼204 and ∼246 mV at a current density of 100 and 300 mA cm-2, respectively, a small Tafel slope of 40.7 mV dec-1, and excellent stability in an alkaline medium. Furthermore, the results from the projected partial density of states calculation not only demonstrate that the 3-fol-coordinated Co near Vo bonded with Cu and V sites (Cu-Co(surf-Vo)-V) exhibits an enhanced electronic transfer activity but also reveal that the doped V could protect the Co sites from the deactivation by intermediates overbinding on the V sites. This work provides new insights into structure engineering of spinel phase copper cobaltite, resulting in significantly boosting electrocatalytic OER activity.

Tailored Plasmonic Ru/OV-MoO2 on TiO2 Catalysts via Solid-Phase Interface Engineering: Toward Highly Efficient Photoassisted Li-O2 Batteries with Enhanced Cycling Reliability

The photoassisted electrochemical reactions are considered an effective method to reduce the overpotential of Li-O₂ batteries. However, achieving long-term cell cycling stability remains a challenge. Here, we report a solid-phase interfacial reaction (SPIR) strategy that introduces both oxygen vacancies (O_V) and metal centers (Ru) into the MoO₂ to synthesize the surface plasmon (i.e., Ru/O_V-MoO₂). Then, Ru/O_V-MoO₂ can be uniformly loaded on the TiO₂ nanowires by the hydrothermal method. The plasma effect of Ru/O_V-MoO₂ demonstrates the effective reduction of the photoexcited electron and hole recombination to improve visible light-harvesting ability. The lifetime of electrons and holes can be extended by Ru nanoparticles, which is beneficial for promoting the formation and decomposition of Li₂O₂. In addition, the generated O_V further enhanced the migration of electrons and Li⁺, thus improving the ORR performance. The Ru/O_V-MT/CC cathode corroborates excellent stability and catalytic performance in the photoassisted Li-O₂ battery, with an overpotential value of 0.47 V, achieving the highest energy efficiency of 93.94%, retaining at 89.13% after 800 h. This work offers a platform for preparing a stable, bifunctional catalyst with the high total activity of a photoassisted Li-O₂ battery.

Pr6O11: Temperature-Dependent Oxygen Vacancy Regulation and Catalytic Performance for Lithium-Oxygen Batteries

Many challenges still exist in lithium-oxygen batteries (LOBs), particularly exploring an efficient catalyst to optimize the reaction pathway and regulate the Li₂O₂ nucleation. Pr₆O₁₁ has a unique 4f electronic structure and the highest oxygen ion mobility among rare earth oxides, exhibiting superior electronic, optical, and chemical properties. These unique properties might endow it with advanced catalytic activities for LOBs. This work reports two crystal forms of Pr₆O₁₁ as novel catalysts and regulates the oxygen vacancy (V_o) concentrations by feasible calcination. Thermogravimetric analysis, X-ray diffraction, and X-ray photoelectron spectroscopy (XPS) confirm the conversion from commercial Pr₆O₁₁ to cubic fluorite Pr₆O₁₁ and V_o-rich Pr₆O₁₁. Photographs, high-resolution transmission electron microscopy, selected area electron diffraction, XPS, and electron paramagnetic resonance robustly demonstrate the temperature-dependent evolution of V_o. Ex situ XPS, scanning electron microscopy, and electrochemical techniques are used to study the catalytic mechanism and electrochemical reversibility. It is found that an appropriate V_o concentration can boost O₂ adsorption/desorption, accelerate electron transport, and reduce the reaction energy barrier. V_o-rich Pr₆O₁₁ optimizes the reaction pathway by offering an intermediate Li_2-xO₂ (with metalloid conductivity) and adjusting Li₂O₂ into vertically staggered nanoflakes, effectively avoiding the suffocation of the catalytic surface and presenting excellent capacity, cycling stability, and rate performance.

High Pressure Rapid Synthesis of LiCrTiO4 with Oxygen Vacancy for High Rate Lithium-Ion Battery Anodes

Lithium-ion battery based on LiCrTiO₄ (LCTO) is considered to be a promising anode material, as they provide higher safety and durability beyond than that of graphite electrode. However, the applications of this transformative technology demand improved inherent electrical conductivity of LCTO as well as a simple and rapid synthetic route. Here, LCTO with oxygen vacancies (OVs) is fabricated using high-pressure synthesis technology in only 40 min. The optimal synthesis pressure is 0.8 GPa (LCTO-0.8). The reversible capacity of LCTO-0.8 at 1C is 131 mA h g^-1 after 1000 cycles and the capacity retention is nearly 97%, and the reversible capacity of LCTO synthesized at atmospheric pressure (LCTO-P) is 85 mA h g^-1 under the same circumstances. Even at 5C, the reversible capacity is 110 mA h g^-1 , which is 77% higher than LCTO-P. Furthermore, it is confirmed by theoretical calculations that the introduction of OVs has the occupation of electronic states at the Fermi level, which greatly enhances the intrinsic conductivity of LCTO. Specifically, the electronic conductivity has increased by two orders of magnitude compared with LCTO-P. Therefore, high-pressure synthesis technology endows LCTO with superior characteristics, providing a new avenue for industrialization.

Composite NiCo2 O4 @CeO2 Microsphere as Cathode Catalyst for High-Performance Lithium-Oxygen Battery

The large overpotential and poor cycle stability caused by inactive redox reactions are tough challenges for lithium-oxygen batteries (LOBs). Here, a composite microsphere material comprising NiCo₂ O₄ @CeO₂ is synthesized via a hydrothermal approach followed by an annealing processing, which is acted as a high performance electrocatalyst for LOBs. The unique microstructured catalyst can provide enough catalytic surface to facilitate the barrier-free transport of oxygen as well as lithium ions. In addition, the special microsphere and porous nanoneedles structure can effectively accelerate electrolyte penetration and the reversible formation and decomposition process of Li₂ O₂ , while the introduction of CeO₂ can increase oxygen vacancies and optimize the electronic structure of NiCo₂ O₄ , thereby enhancing the electron transport of the whole electrode. This kind of catalytic cathode material can effectively reduce the overpotential to only 1.07 V with remarkable cycling stability of 400 loops under 500 mA g^-1 . Based on the density functional theory calculations, the origin of the enhanced electrochemical performance of NiCo₂ O₄ @CeO₂ is clarified from the perspective of electronic structure and reaction kinetics. This work demonstrates the high efficiency of NiCo₂ O₄ @CeO₂ as an electrocatalyst and confirms the contribution of the current design concept to the development of LOBs cathode materials.

Insight into the effects of oxygen vacancy on the toluene oxidation over α-MnO2 catalyst

In order to clarify the role of oxygen vacancy (OV), five α-MnO₂ catalysts with abundant OVs are fabricated via a novel and facile redox-precipitation approach and employed to the toluene oxidation in air. The concentration of OVs in α-MnO₂ catalysts is regulated via the alkyl chain length of alcohols, and its correlation with catalytic performances is scientifically investigated based on various characterization technologies and density functional theory (DFT) calculation. The α-MnO₂-C2 catalyst exhibits excellent catalytic activity (T₉₀ = 217 °C), stability, and water resistance for toluene oxidation in air. The OVs can induce the new bandgap states (BGS), which upshift the antibonding orbitals relative to the Fermi level (E_f), eventually favoring the formation of adsorbed active oxygen species. Furthermore, the OVs cause an increase in the amount of Mn³⁺, resulting in the elongated Mn-O bonds due to the strong Jahn-Teller effect of Mn³⁺. Therefore, the synergistic effects of OVs benefit toluene oxidation through L-H and MvK mechanisms over the prepared α-MnO₂-Cx catalysts. This work reveals the important role of OVs in the promotion of toluene catalytic oxidation activity and also may provide new insights for the design of high-performance VOCs oxidation elimination catalyst.

Oxygen Vacancy-Mediated Growth of Amorphous Discharge Products toward an Ultrawide Band Light-Assisted Li-O2 Batteries

Photoassisted electrochemical reaction is regarded as an effective approach to reduce the overpotential of lithium-oxygen (Li-O₂ ) batteries. However, the achievement of both broadband absorption and long term battery cycling stability are still a formidable challenge. Herein, an oxygen vacancy-mediated fast kinetics for a photoassisted Li-O₂ system is developed with a silver/bismuth molybdate (Ag/Bi₂ MoO₆ ) hybrid cathode. The cathode can offer both double advantages for light absorption covering UV to visible region and excellent electrochemical activity for O₂ . Upon discharging, the photoexcited electrons from Ag nanoplate based on the localized surface plasmon resonance (LSPR) are injected into the oxygen vacancy in Bi₂ MoO₆ . The fast oxygen reaction kinetics generate the amorphous Li₂ O₂ , and the discharge plateau is improved to 3.05 V. Upon charging, the photoexcited holes are capable to decompose amorphous Li₂ O₂ promptly, yielding a very low charge plateau of 3.25 V. A first cycle round-trip efficiency is 93.8% and retention of 70% over 500 h, which is the longest cycle life ever reported in photoassisted Li-O₂ batteries. This work offers a general and reliable strategy for boosting the electrochemical kinetics by tailoring the crystalline of Li₂ O₂ with wide-band light.

Heterogeneous Bimetallic Organic Coordination Polymer-Derived Co/Fe@NC Bifunctional Catalysts for Rechargeable Li-O2 Batteries

The Li-O₂ battery has attracted substantial attention due to its high theoretical energy density. In particular, high-efficiency oxygen catalysts are very important for the design of practical Li-O₂ batteries. Herein, we have synthesized heterogeneous crystalline-coated partially crystalline bimetallic organic coordination polymers (PC@C-BMOCPs), which are further pyrolyzed to obtain Co- and Fe-based nanoparticles embedded within rodlike N-doped carbon (Co/Fe@NC) as a bifunctional oxygen reduction reaction/oxygen evolution reaction (ORR/OER) catalyst used in the Li-O₂ battery. Owing to excellent ORR/OER catalytic ability, the Co/Fe@NC bifunctional catalyst exhibits an efficient reversible reaction between O₂ and Li₂O₂. Additionally, a large number of mesoporous channels are present in the core-shell Co/Fe@NC nanoparticles. These channels not only promote the diffusion of Li⁺ and O₂, but also create ample room to store insoluble discharge product Li₂O₂. The Li-O₂ batteries utilizing the bifunctional Co/Fe@NC oxygen electrode exhibit a large capacity of 17,326 mAh g^-1, a long cycling life of more than 250 cycles, and excellent reversibility. This work provides a universally applicable strategy for designing nonnoble metal ORR/OER catalysts with excellent electrochemical performance for metal-air batteries.

Realizing Superior Redox Kinetics of Hollow Bimetallic Sulfide Nanoarchitectures by Defect-Induced Manipulation toward Flexible Solid-State Supercapacitors

As a typical battery-type material, CuCo₂ S₄ is a promising candidate for supercapacitors due to the high theoretical specific capacity. However, its practical application is plagued by inherently sluggish ion diffusion kinetics and inferior electrical transport properties. Herein, sulfur vacancies are incorporated in CuCo₂ S₄ hollow nanoarchitectures (HNs) to accelerate redox reactivity. Experimental analyses and theoretical investigations uncover that the generated sulfur vacancies increase the active electron states, reduce the adsorption barriers of electrolyte ions, and enrich reactive redox species, thus achieving enhanced electrochemical performance. Consequently, the deficient CuCo₂ S₄ with optimized vacancy concentration presents a high specific capacity of 231 mAh g^-1 at 1 A g^-1 , a ≈1.78 times increase compared to that of pristine CuCo₂ S₄ , and exhibits a superior rate capability (73.8% capacity retention at 20 A g^-1 ). Furthermore, flexible solid-state asymmetric supercapacitor devices assembled with the deficient CuCo₂ S₄ HNs and VN nanosheets deliver a high energy density of 61.4 W h kg^-1 at 750 W kg^-1 . Under different bending states, the devices display exceptional mechanical flexibility with no obvious change in CV curves at 50 mV s^-1 . These findings provide insights for regulating electrode reactivity of battery-type materials through intentional nanoarchitectonics and vacancy engineering.

In Situ Defect Engineering Route to Optimize the Cationic Redox Activity of Layered Double Hydroxide Nanosheet via Strong Electronic Coupling with Holey Substrate

A defect engineering of inorganic solids garners great deal of research activities because of its high efficacy to optimize diverse energy-related functionalities of nanostructured materials. In this study, a novel in situ defect engineering route to maximize electrocatalytic redox activity of inorganic nanosheet is developed by using holey nanostructured substrate with strong interfacial electronic coupling. Density functional theory calculations and in situ spectroscopic analyses confirm that efficient interfacial charge transfer takes place between holey TiN and Ni-Fe-layered double hydroxide (LDH), leading to the feedback formation of nitrogen vacancies and a maximization of cation redox activity. The holey TiN-LDH nanohybrid is found to exhibit a superior functionality as an oxygen electrocatalyst and electrode for Li-O2 batteries compared to its non-holey homologues. The great impact of hybridization-driven vacancy introduction on the electrochemical performance originates from an efficient electrochemical activation of both Fe and Ni ions during electrocatalytic process, a reinforcement of interfacial electronic coupling, an increase in electrochemical active sites, and an improvement in electrocatalysis/charge-transfer kinetics.

Li2 O2 Formation Electrochemistry and Its Influence on Oxygen Reduction/Evolution Reaction Kinetics in Aprotic Li-O2 Batteries

Aprotic Li-O₂ batteries are regarded as the most promising technology to resolve the energy crisis in the near future because of its high theoretical specific energy. The key electrochemistry of a nonaqueous Li-O₂ battery highly relies on the formation of Li₂ O₂ during discharge and its reversible decomposition during charge. The properties of Li₂ O₂ and its formation mechanisms are of high significance in influencing the battery performance. This review article demonstrates the latest progress in understanding the Li₂ O₂ electrochemistry and the recent advances in regulating the Li₂ O₂ growth pathway. The first part of this review elaborates the Li₂ O₂ formation mechanism and its relationship with the oxygen reduction reaction/oxygen evolution reaction electrochemistry. The following part discusses how the cycling parameters, e.g., current density and discharge depth, influence the Li₂ O₂ morphology. A comprehensive summary of recent strategies in tailoring Li₂ O₂ formation including rational design of cathode structure, certain catalyst, and surface engineering is demonstrated. The influence resulted from the electrolyte, e.g., salt, solvent, and some additives on Li₂ O₂ growth pathway, is finally discussed. Further prospects of the ways in making advanced Li-O₂ batteries by control of favorable Li₂ O₂ formation are highlighted, which are valuable for practical construction of aprotic lithium-oxygen batteries.

Rationalizing Surface Electronic Configuration of Ni-Fe LDO by Introducing Cationic Nickel Vacancies as Highly Efficient Electrocatalysts for Lithium-Oxygen Batteries

Cationic defect engineering is an effective strategy to optimize the electronic structure of active sites and boost the oxygen electrode reactions in lithium-oxygen batteries (LOBs). Herein, Ni-Fe layered double oxides enriched with cationic nickel vacancies (Ni-Fe LDO-V_Ni ) are first designed and studied as the electrocatalysts for LOBs. Based on the density functional theory calculation, the existence of nickel vacancy in Ni-Fe LDO-V_Ni significantly improves its intrinsic affinity toward intermediates, thereby fundamentally optimizing the formation and decomposition pathway of Li₂ O₂ . In addition, the number of e_g electrons on each nickel site is 1.19 for Ni-Fe LDO-V_Ni , which is much closer to 1 than 1.49 for Ni-Fe LDO. The near-unity occupation of e_g orbital enhances the covalency of transition metal-oxygen bonds and thus improves the electrocatalytic activity of Ni-Fe LDO-V_Ni toward oxygen electrode reactions. The experimental results show that the LOBs with Ni-Fe LDO-V_Ni electrode deliver low overpotentials of 0.11/0.29 V during the oxygen reduction reaction/oxygen evolution reaction, respectively, large specific capacities of 13 933 mA h g^-1 and superior cycling stability of over 826 h. This study provides a novel approach to optimize the electrocatalytic activity of LDO through reasonable defect engineering.

Introducing Oxygen Vacancies in Li4Ti5O12 via Hydrogen Reduction for High-Power Lithium-Ion Batteries

Li4Ti5O12 (LTO), known as a zero-strain material, is widely studied as the anode material for lithium-ion batteries owing to its high safety and long cycling stability. However, its low electronic conductivity and Li diffusion coefficient significantly deteriorate its high-rate performance. In this work, we proposed a facile approach to introduce oxygen vacancies into the commercialized LTO via thermal treatment under Ar/H2 (5%). The oxygen vacancy-containing LTO demonstrates much better performance than the sample before H2 treatment, especially at high current rates. Density functional theory calculation results suggest that increasing oxygen vacancy concentration could enhance the electronic conductivity and lower the diffusion barrier of Li+, giving rise to a fast electrochemical kinetic process and thus improved high-rate performance.

Oxygen Vacancy-Rich RuO2-Co3O4 Nanohybrids as Improved Electrocatalysts for Li-O2 Batteries

Lithium oxygen (Li-O₂) batteries have shown great potential as new energy-storage devices due to the high theoretical energy density. However, there are still substantial problems to be solved before practical application, including large overpotential, low energy efficiency, and poor cycle life. Herein, we have successfully synthesized a RuO₂-Co₃O₄ nanohybrid with a rich oxygen vacancy and large specific surface area. The Li-O₂ batteries based on the RuO₂-Co₃O₄ nanohybrid shown obviously reduced overpotential and improved circulatory property, which can cycle stably for more than 100 cycles at a current density of 200 mA g^-1. Experimental results and density function theory calculation prove that the introduction of RuO₂ can increase oxygen vacancy concentration of Co₃O₄ and accelerate the charge transfer. Meanwhile, the hollow and porous structure leads to a large specific surface area about 104.5 m² g^-1, exposing more active sites. Due to the synergistic effect, the catalyst of the RuO₂-Co₃O₄ nanohybrid can significantly reduce the adsorption energy of the LiO₂ intermediate, thereby reducing the overpotential effectively.

Sodium oxalate-induced hydrothermal synthesis of wood-texture-column-like NiCo2O4 with broad bandwidth electromagnetic wave absorption performance

Single-component absorbent with wide-band absorption and strong attenuation capability is a challenge for efficient electromagnetic wave absorption. Morphology manipulation is an effective pathway to enhance electromagnetic wave absorption. Herein, naked NiCo₂O₄ with novel morphology of wood-texture-column-like nanostructure was synthesized for the first time through sodium oxalate-induced hydrothermal synthesis. The electromagnetic parameters are adjusted by controlling the amount of sodium oxalate to optimize absorbing performance. The optimum absorption performance occurs when the molar ratio of sodium oxalate to metal ions is 1.5, in which the effective absorption bandwidth is up to 7.10 GHz (10.90-18 GHz) at only 2.20 mm and the minimum reflection loss is low to -49.78 dB. Notably, the qualified EAB can cover the entire C, X and Ku bands by adjusting the thickness from 1.7 to 5.0 mm. Excellent absorbing performance is attributed to appropriate impedance matching originating from numerous cracks and pores in nanostructures and strong dipole polarization induced dominantly by oxygen vacancy together with lattice distortion. This study provides an excellent candidate for the study of single-component electromagnetic wave absorbents.