Activating Layered Metal Oxide Nanomaterials via Structural Engineering as Biodegradable Nanoagents for Photothermal Cancer Therapy

Biosynthesis of NIR-II Ag2Se Quantum Dots with Bacterial Catalase for Photoacoustic Imaging and Alleviating-Hypoxia Photothermal Therapy

Developing the second near-infrared (NIR-II) photoacoustic (PA) agent is of great interest in bioimaging. Ag2Se quantum dots (QDs) are one kind of potential probe for applications in NIR-II photoacoustic imaging (PAI). However, the surfaces with excess anions of Ag2Se QDs, which increase the probability of nonradiative transitions of excitons benefiting PA imaging, are not conducive to binding electron donor ligands for potential biolabeling and imaging. In this study, Staphylococcus aureus (S. aureus) cells are driven for the biosynthesis of Ag2Se QDs with catalase (CAT). Biosynthesized Ag2Se (bio-Ag2Se-CAT) QDs are produced in Se-enriched environment of S. aureus and have a high Se-rich surface. The photothermal conversion efficiency of bio-Ag2Se-CAT QDs at 808 and 1064 nm is calculated as 75.3% and 51.7%, respectively. Additionally, the PA signal responsiveness of bio-Ag2Se-CAT QDs is ≈10 times that of the commercial PA contrast agent indocyanine green. In particular, the bacterial CAT is naturally attached to bio-Ag2Se-CAT QDs surface, which can effectively relieve tumor hypoxia. The bio-Ag2Se-CAT QDs can relieve heat-initiated oxidative stress while undergoing effective photothermal therapy (PTT). Such biosynthesis method of NIR-II bio-Ag2Se-CAT QDs opens a new avenue for developing multifunctional nanomaterials, showing great promise for PAI, hypoxia alleviation, and PTT.

AIBI Modified Mesoporous Copper Sulfide Nanocomposites for Efficient Non-Oxygen Dependent Free Radicals-Assisted Photothermal Therapy in Uveal Melanoma

Uveal melanoma (UM) is an ocular cancer predominantly affecting adults, characterized by challenging diagnostic outcomes. This research endeavors to develop an innovative multifunctional nanocomposite system sensitive to near-infrared (NIR) radiation, serving as both a non-oxygen free-radical generator and a photothermal agent. The designed system combines azobis isobutyl imidazoline hydrochloride (AIBI) with mesoporous copper sulfide (MCuS) nanoparticles. MCuS harnesses NIR laser energy to induce photothermal therapy, converting light energy into heat to destroy cancer cells. Simultaneously, AIBI is activated by the NIR laser to produce alkyl radicals, which induce DNA damage in remaining cancer cells. This distinctive feature equips the designed system to selectively eliminate cancers in the hypoxic tumor microenvironment. MCuS is also beneficial to scavenge the overexpressed glutathione (GSH) in the tumor microenvironment. GSH generally consumes free radicals and hiders the PDT effect. To enhance control over AIBI release in cancer cells, 1-tetradecyl alcohol (TD), a phase-changing material, is introduced onto the surface of MCuS nanoparticles to create the final AMPT nanoparticle system. In vitro and in vivo experiments confirm the remarkable anti-tumor efficacy of AMPT. Notably, the study introduces an orthotopic tumor model for UM, demonstrating the feasibility of precise and effective targeted treatment within the ocular system.

Tumor microenvironment responsive chitosan-coated W-doped MoOx biodegradable composite nanomaterials for photothermal/chemodynamic synergistic therapy

Chemodynamic therapy (CDT), an approach that eradicates tumor cells through the catalysis of hydrogen peroxide (H2O2) into highly toxic hydroxyl radicals (·OH), possesses distinct advantages in tumor specificity and minimal side effects. However, CDT's therapeutic efficacy is currently hampered by the low production efficiency of ·OH. To address this limitation, this study introduces a water-soluble chitosan-coated W-doped MoOx (WMoOx/CS) designed for the combined application of photothermal therapy (PTT) combined with CDT. The W-doped MoOx (WMoOx) was synthesized in one step by the hydrothermal method, and its surface was modified by water-soluble chitosan (carboxylated chitosan, CS) to enhance its biocompatibility. WMoOx boasts a high near-infrared photothermal conversion efficiency of 52.66 %, efficiently transducing near-infrared radiation into heat. Moreover, the Mo4+/Mo5+ and W5+ ions in WMoOx catalyze H2O2 to produce ·OH for CDT, and the Mo5+/Mo6+ and W6+ ions in WMoOx reduce intracellular glutathione levels and prevent the scavenging of ·OH by glutathione. Crucially, the combination of WMoOx/CS and near-infrared light irradiation demonstrates promising synergistic antitumor effects in both in vitro and in vivo models, highlighting its potential for the combined application of PTT and CDT.

Multifunctional Adaptable Injectable TiN-Based Hydrogels for Antitumor and Antidrug-Resistant Bacterial Therapy

The close relationship between bacteria and tumors has recently attracted increasing attention, and an increasing number of resources are being invested in the research and development of biomedical materials designed for the treatment of both. In this study, prefabricated TiN nanodots (NDs) and Fe(CO)5 nanoparticles are combined into sodium alginate (ALG) hydrogels to create a biomedical material for the topical treatment of breast cancer and subcutaneous abscesses, and a pseudocatalytic hydrogel with intrinsic photothermal and antibacterial activities is synthesized. TiN+Fe(CO)5+ALG hydrogels are used to determine the ability of Fe(CO)5 to promote CO production. Moreover, TiN NDs catalyze the production of reactive oxygen species (ROS) from hydrogen peroxide in tumor microenvironments and exhibit excellent photothermal conversion properties. After local injection of the TiN+Fe(CO)5+ALG hydrogel into subcutaneous tumors and subcutaneous abscesses, and two-zone near-infrared (NIR-II) irradiation, tumor cells and methicillin-resistant Staphylococcus aureus are effectively removed by the hydrogel, the mouse epidermis exhibiting complete recovery within 8 d, indicating that this hydrogel exhibits better antibacterial efficacy than the small-molecule antibiotic penicillin. This study demonstrates the potential of novel hydrogels for antitumor and antimicrobial combination therapy and aims to provide design ideas for the research and development of multifunctional antitumor and antimicrobial drug combinations.

Engineering polyvinyl alcohol microspheres with capability for use in photothermal/chemodynamic therapy for enhanced transarterial chemoembolization

Transarterial chemoembolization (TACE) is widely recognized as a non-surgical treatment approach for advanced liver cancer, combining chemotherapy with the blockage of blood vessels supplying the tumor. To enhance the efficacy of TACE and address chemotherapy resistance, there is growing interest in the development of multifunctional embolic microspheres. In this study, multifunctional PVA microspheres, which encapsulate MIT as a chemotherapeutic drug, PPY as a photothermal agent, and Fe3O4 as a chemodynamic therapy agent, were prepared successfully. The results demonstrated that the developed multifunctional PVA microspheres not only exhibit favorable drug release, photothermal therapy, and chemodynamic therapy performance, but also show a promising synergistic therapeutic effect both in vitro and in vivo. Consequently, the engineered multifunctional PVA microspheres hold tremendous promise for enhancing TACE effectiveness and have the potential to overcome limitations associated with traditional liver cancer treatments.

Increasing the Particle Size and Magnetic Property of Iron Oxide Nanoparticles through a Segregated Nucleation and Growth Process

Iron oxide nanoparticles (IONs) with good water dispersibility were prepared by the thermal decomposition of iron acetylacetonate (Fe(acac)3) in the high-boiling organic solvent polyethylene glycol (PEG) using polyethyleneimine (PEI) as a modifier. The nucleation and growth processes of the crystals were separated during the reaction process by batch additions of the reaction material, which could inhibit the nucleation but maintain the crystal growth, and products with larger particle sizes and high saturation magnetization were obtained. The method of batch addition of the reactant prepared IONs with the largest particle size and the highest saturation magnetization compared with IONs reported using PEG as the reaction solvent. The IONs prepared by this method also retained good water dispersibility. Therefore, these IONs are potentially suitable for the magnetic separation of cells, proteins, or nucleic acids when large magnetic responses are needed.

Ultralow Loading Copper-Intercalated MoO3 Nanobelts with High Activity against Antibiotic-Resistant Bacteria

In recent years, the infection rate of antibiotic resistance has been increasing year by year, and the prevalence of super bacteria has posed a great threat to human health. Therefore, there is an urgent need to find new antibiotic alternatives with long-term inhibitory activity against a broad spectrum of bacteria and microorganisms in order to avoid the proliferation of more multidrug-resistant (MDR) bacteria. The presence of natural van der Waals (vdW) gaps in layered materials allows them to be easily inserted by different guest species, providing an attractive strategy for optimizing their physicochemical properties and applications. Here, we have successfully constructed a copper-intercalated α-MoO3 nanobelt based on nanoenzymes, which is antibacterial through the synergistic effect of multiple enzymes. Compared with α-MoO3, MoO3-x/Cu nanobelts with a copper loading capacity of 2.11% possess enhanced peroxidase (POD) catalytic activity and glutathione (GSH) depletion, indicating that copper intercalation significantly improves the catalytic performance of the nanoenzymes. The MoO3-x/Cu nanobelts are effective in inducing POD and oxidase (OXD) and catalase (CAT) activities in the presence of H2O2 and O2, which resulted in the generation of large amounts of reactive oxygen species (ROS), which were effective in bacterial killing. Interestingly, MoO3-x/Cu nanobelts can serve as glutathione oxidase (GSHOx)-like nanoenzymes, which can deplete GSH in bacteria and thus significantly improve the bactericidal effect. The multienzyme-catalyzed synergistic antimicrobial strategy shows excellent antimicrobial efficiency against β-lactamase-producing Escherichia coli (ESBL-E. coli) and methicillin-resistant Staphylococcus aureus (MRSA). MoO3-x/Cu exhibits excellent spectral bactericidal properties at very low concentrations (20 μg mL-1). Our work highlights the wide range of antibacterial and anti-infective biological applications of copper-intercalated MoO3-x/Cu nanobelt catalysts.

In vivo visualization of tumor-associated macrophages re-education by photoacoustic/fluorescence dual-modal imaging with a metal-organic frames-based caspase-1 nanoreporter

Tumor-associated macrophages (TAMs) are vital in the tumor microenvironment, contributing to immunosuppression and therapy tolerance. Despite their importance, the precise re-education of TAMs in vivo continues to present a formidable challenge. Moreover, the lack of real-time and efficient methods to comprehend the spatiotemporal kinetics of TAMs repolarization remains a significant hurdle, severely hampering the accurate assessment of treatment efficacy and prognosis. Herein, we designed a metal-organic frameworks (MOFs) based Caspase-1 nanoreporter (MCNR) that can deliver a TLR7/8 agonist to the TAMs and track time-sensitive Caspase-1 activity as a direct method to monitor the initiation of immune reprogramming. This nanosystem exhibits excellent TAMs targeting ability, enhanced tumor accumulation, and stimuli-responsive behavior. By inducing the reprogramming of TAMs, they were able to enhance T-cell infiltration in tumor tissue, resulting in inhibited tumor growth and improved survival in mice model. Moreover, MCNR also serves as an activatable photoacoustic and fluorescent dual-mode imaging agent through Caspase-1-mediated specific enzyme digestion. This feature enables non-invasive and real-time antitumor immune activation monitoring. Overall, our findings indicate that MCNR has the potential to be a valuable tool for tumor immune microenvironment remodeling and noninvasive quantitative detection and real-time monitoring of TAMs repolarization to immunotherapy in the early stage.

Synergistic Interaction between Metal Single-Atoms and Defective WO3- x Nanosheets for Enhanced Sonodynamic Cancer Therapy

Although metal single-atom (SA)-based nanomaterials are explored as sonosensitizers for sonodynamic therapy (SDT), they normally exhibit poor activities and need to combine with other therapeutic strategies. Herein, the deposition of metal SAs on oxygen vacancy (OV)-rich WO3- x nanosheets to generate a synergistic effect for efficient SDT is reported. Crystalline WO3 and OV-rich WO3- x nanosheets are first prepared by simple calcination of the WO3 ·H2 O nanosheets under an air and N2 atmosphere, respectively. Pt, Cu, Fe, Co, and Ni metal SAs are then deposited on WO3- x nanosheets to obtain metal SA-decorated WO3- x nanocomposites (M-WO3- x ). Importantly, the Cu-WO3- x sonosensitizer exhibits a much higher activity for ultrasound (US)-induced production of reactive oxygen species than that of the WO3- x and Cu SA-decorated WO3 , which is also higher than other M-WO3- x nanosheets. Both the experimental and theoretical results suggest that the excellent SDT performance of the Cu-WO3- x nanosheets should be attributed to the synergistic effect between Cu SAs and WO3- x OVs. Therefore, after polyethylene glycol modification, the Cu-WO3- x can quickly kill cancer cells in vitro and effectively eradicate tumors in vivo under US irradiation. Transcriptome sequencing analysis and further molecular validation suggest that the Cu-WO3- x -mediated SDT-activated apoptosis and TNF signaling pathways are potential drivers of tumor apoptosis induction.

Illuminating the Brain: Advances and Perspectives in Optoelectronics for Neural Activity Monitoring and Modulation

Optogenetic modulation of brain neural activity that combines optical and electrical modes in a unitary neural system has recently gained robust momentum. Controlling illumination spatial coverage, designing light-activated modulators, and developing wireless light delivery and data transmission are crucial for maximizing the use of optical neuromodulation. To this end, biocompatible electrodes with enhanced optoelectrical performance, device integration for multiplexed addressing, wireless transmission, and multimodal operation in soft systems have been developed. This review provides an outlook for uniformly illuminating large brain areas while spatiotemporally imaging the neural responses upon optoelectrical stimulation with little artifacts. Representative concepts and important breakthroughs, such as head-mounted illumination, multiple implanted optical fibers, and micro-light-delivery devices, are discussed. Examples of techniques that incorporate electrophysiological monitoring and optoelectrical stimulation are presented. Challenges and perspectives are posed for further research efforts toward high-density optoelectrical neural interface modulation, with the potential for nonpharmacological neurological disease treatments and wireless optoelectrical stimulation.

Biodegradable germanium nanoparticles as contrast agents for near-infrared-II photoacoustic imaging

Photoacoustic (PA) imaging using contrast agents with strong near-infrared-II (NIR-II, 1000-1700 nm) absorption enables deep penetration into biological tissue. Besides, biocompatibility and biodegradability are essential for clinical translation. Herein, we developed biocompatible and biodegradable germanium nanoparticles (GeNPs) with high photothermal stability as well as strong and broad absorption for NIR-II PA imaging. We first demonstrate the excellent biocompatibility of the GeNPs through experiments, including the zebrafish embryo survival rates, nude mouse body weight curves, and histological images of the major organs. Then, comprehensive PA imaging demonstrations are presented to showcase the versatile imaging capabilities and excellent biodegradability, including in vitro PA imaging which can bypass blood absorption, in vivo dual-wavelength PA imaging which can clearly distinguish the injected GeNPs from the background blood vessels, in vivo and ex vivo PA imaging with deep penetration, in vivo time-lapse PA imaging of a mouse ear for observing biodegradation, ex vivo time-lapse PA imaging of the major organs of a mouse model for observing the biodistribution after intravenous injection, and notably in vivo dual-modality fluorescence and PA imaging of osteosarcoma tumors. The in vivo biodegradation of GeNPs is observed not only in the normal tissue but also in the tumor, making the GeNPs a promising candidate for clinical NIR-II PA imaging applications.

Carbon dots-mediated synthesis of gold nanodendrites with extended absorption into NIR-II window for in vivo photothermal therapy

BACKGROUND

Photothermal therapy (PTT) in the second near-infrared (NIR-II) window has attracted extensive attention due to the benefits in high maximum permissible exposure and penetration depth. Current photothermal agents generally show a broadband absorption accompanied by a gradual attenuation of absorption in the NIR-II window, leading to poor effect of PTT. It remains a great challenge to gain photothermal agents with strong and characteristic absorption in NIR-II regions. To overcome this problem, based on carbon dots (CDs)-mediated growth strategy, we proposed a simple and feasible approach to prepare plasmonic gold nanodendrites (AuNDs) with NIR-II absorption to enhance the therapeutic effect of PTT.

RESULTS

By rationally regulating the size and branch length of AuNDs, the AuNDs exhibited a broadband absorption from 300 to 1350 nm, with two characteristic absorption peaks located at 1077 and 1265 nm. The AuNDs demonstrated desired optical photothermal conversion efficiency (38.0%), which was further applied in NIR-II photoacoustic imaging (PAI) and PTT in human colon cancer cells (HCT 116)-tumor-bearing mice model. The tumor cells could be effectively eliminated in vivo under 1064 nm laser irradiation by the guidance of PAI.

CONCLUSIONS

We reported a simple but powerful synthetic method to obtain the unique AuNDs with strong and characteristic absorption peaks in the NIR-II window. This study provides a promising solution to tuning the growth of nanoparticles for bioimaging and phototherapy in the NIR-II window.

Thermal transport across copper-water interfaces according to deep potential molecular dynamics

Nanoscale thermal transport at solid-liquid interfaces plays an essential role in many engineering fields. This work performs deep potential molecular dynamics (DPMD) simulations to investigate thermal transport across copper-water interfaces. Unlike traditional classical molecular dynamics (CMD) simulations, we independently train a deep learning potential (DLP) based on density functional theory (DFT) calculations and demonstrated its high computational efficiency and accuracy. The trained DLP predicts radial distribution functions (RDFs), vibrational densities of states (VDOS), density curves, and thermal conductivity of water confined in the nanochannel at a DFT accuracy. The thermal conductivity decreases slightly with an increase in the channel height, while the influence of the cross-sectional area is negligible. Moreover, the predicted interfacial thermal conductance (ITC) across the copper-water interface by DPMD is 2.505 × 10⁸ W m^-2 K^-1, the same order of magnitude as the CMD and experimental results but with a high computational accuracy. This work seeks to simulate the thermal transport properties of solid-liquid interfaces with DFT accuracy at large-system and long-time scales.

A single-step plasma method for rapid production of 2D, ferromagnetic, surface vacancy-engineered MoO3-xnanomaterials, for photothermal ablation of cancer

A rapid, clean plasma-chemical technique is demonstrated here, for cost-effective, synthesis of surface vacancy engineered, 2D, molybdenum-oxide nanomaterials, during a one-step, integrated synthesis-hydrogenation process for biomedical applications. A laminar plasma beam populated with O and H radicals impinges on a molybdenum target, out of which molybdenum-oxide nanomaterials are very rapidly generated with controlled surface O vacancies. 2D, dark-blue coloured, nano-flake/ribbon like MoO_3-xis produced maximum up to 194 g h^-1, the core of which still remains as stoichiometric molybdenum-oxide. These nanomaterials can get heated-up by absorbing energy from a near-infrared (NIR) laser, which enable them as photothermal therapy (PTT) candidate material for the invasive precision therapy of cancer. The surface defects endows the products with robust ferromagnetism at room temperature conditions (maximum saturation-magnetization: 6.58 emu g^-1), which is order of magnitude stronger than most other vacancy engineered nanomaterials. These nanometric metal-oxides are observed to be perfectly compatible in animal physiological environment and easily dispersed in an aqueous solution even without any pre-treatment. The MoO_3-xnanomaterials are stable against further oxidation even under prolonged atmospheric exposure.In vitroexperiments confirm that they have ideal efficacy for photothermal ablation of human and murine melanoma cancer at relatively lower dose. Duringin vivoPTT treatments, they may be manipulated with a simple external magnetic field for targeted delivery at the malignant tumours. It is demonstrated that commensurate to the neutralization of the malignant cells, the nanomaterials themselves get self-degraded, which should get easily excreted out of the body.

Lithium: A Promising Anticancer Agent

Lithium is a therapeutic cation used to treat bipolar disorders but also has some important features as an anti-cancer agent. In this review, we provide a general overview of lithium, from its transport into cells, to its innovative administration forms, and based on genomic, transcriptomic, and proteomic data. Lithium formulations such as lithium acetoacetate (LiAcAc), lithium chloride (LiCl), lithium citrate (Li₃C₆H₅O₇), and lithium carbonate (Li₂CO₃) induce apoptosis, autophagy, and inhibition of tumor growth and also participate in the regulation of tumor proliferation, tumor invasion, and metastasis and cell cycle arrest. Moreover, lithium is synergistic with standard cancer therapies, enhancing their anti-tumor effects. In addition, lithium has a neuroprotective role in cancer patients, by improving their quality of life. Interestingly, nano-sized lithium enhances its anti-tumor activities and protects vital organs from the damage caused by lipid peroxidation during tumor development. However, these potential therapeutic activities of lithium depend on various factors, such as the nature and aggressiveness of the tumor, the type of lithium salt, and its form of administration and dosage. Since lithium has been used to treat bipolar disorder, the current study provides an overview of its role in medicine and how this has changed. This review also highlights the importance of this repurposed drug, which appears to have therapeutic cancer potential, and underlines its molecular mechanisms.

Oxygen vacancy mediated α-MoO3 bactericidal nanocatalyst in the dark: Surface structure dependent superoxide generation and antibacterial mechanisms

Understanding bacteria inactivation mechanisms of nanomaterials on the surface molecular level is of prime importance for the development of antibacterial materials and their application in restraining the transmission of pathogenic microorganisms. This study prepared an oxygen vacancy-mediated bactericidal nanocatalyst α-MoO₃ which exhibited excellent antibacterial activity against Escherichia coli and Staphylococcus aureus in the dark. By manipulating the surface structure of α-MoO₃, the facile tuning of superoxide radical (•O₂^-) generation can be achieved, which was confirmed by electron paramagnetic resonance. •O₂^- disrupted bacterial membrane through attacking lipopolysaccharide (LPS) and phosphatidylethanolamine (PE). Intracellular reactive oxygen species (ROS) experiments confirm that oxidative stress induced by •O₂^- also played a vital role in bacterial inactivation, which might account for DNA damage verified by comet assays. The α-MoO₃ with rich oxygen vacancies also exhibited good antibacterial efficiency (＞99.00 %) toward airborne microbes under dark conditions, indicating its potential to impede the transmission of pathogenic microbes.

Collaborative Design of MgO/FeOx Nanosheets on Titanium: Combining Therapy with Regeneration

The repair of bone defects caused by osteosarcoma resection remains a clinical challenge because of the tumor recurrence and bacterial infection. Combining tumor and bacterial therapy with bone regeneration properties in bone implants is a promising strategy for the treatment of osteosarcoma. Here, a layer of MgO/FeO_x nanosheet is constructed on the Ti implant to prevent tumor recurrence and bacterial infection, while simultaneously accelerating bone formation. This MgO/FeO_x double metal oxide demonstrates good peroxidase activity to catalyze H₂ O₂ , which is rich in tumor microenvironment, to form reactive oxygen species (ROS), and shows good photothermal conversion capacity to produce photothermal effect, thus synergistically killing tumor cells and eliminating tumor tissue. In addition, it generates a local alkaline surface microenvironment to inhibit the energy metabolism of bacteria to enhance the photothermal antibacterial effect. Furthermore, benefiting from the generation of a Mg ion-containing alkaline microenvironment, this MgO/FeO_x film can promote the osteogenic differentiation of osteoblast and angiogenesis of vascular endothelial cells in vitro as well as accelerated bone formation in vivo. This study proposes a multifunctional platform for integrating tumor and bacterial therapy and bone regeneration, which has good application prospects for the treatment of osteosarcoma.

Preparation of 2D Polyaniline/MoO3- x Superlattice Nanosheets via Intercalation-Induced Morphological Transformation for Efficient Chemodynamic Therapy

Organic intercalation of layered nanomaterials is an attractive strategy to fabricate organic/inorganic superlattices for a wide range of promising applications. However, the synthesis of 2D organic/inorganic superlattice nanosheets remains a big challenge. Herein, the preparation of 2D polyaniline/MoO_{3- x} (PANI/MoO_{3- x} ) superlattice nanosheets via intercalation-induced morphological transformation from MoO₃  nanobelts, as efficient Fenton-like reagents for chemodynamic therapy (CDT), is reported. Micrometer-long MoO₃  nanobelts are co-intercalated with Na⁺ /H₂ O followed by the guest exchange with aniline monomer for in situ polymerization to obtain PANI/MoO_{3- x} nanosheets. Intriguingly, the PANI intercalation can induce the morphological transformation from long MoO₃  nanobelts to 2D PANI/MoO_{3- x} nanosheets along with the partial reduction of Mo⁶⁺ to Mo⁵⁺ , and generation of rich oxygen vacancies. More importantly, thanks to the PANI intercalation-induced activation, the PANI/MoO_{3- x} nanosheets exhibit excellent Fenton-like catalytic activity for generation of hydroxyl radical (·OH) by decomposing H₂ O₂  compared with the MoO₃  nanobelts. It is speculated that the good conductivity of PANI can facilitate electron transport during the Fenton-like reaction, thereby enhancing the efficiency of CDT. Thus, the polyvinylpyrrolidone-modified PANI/MoO_{3- x} nanosheets can function as Fenton-like reagents for highly efficient CDT to kill cancer cells and eradicate tumors.

Antibacterial Pathways in Transition Metal-Based Nanocomposites: A Mechanistic Overview

Across the planet, outbreaks of bacterial illnesses pose major health risks and raise concerns. Photodynamic, photothermal, and metal ion release effects of transition metal-based nanocomposites (TMNs) were recently shown to be highly effective in reducing bacterial resistance and upsurges in outbreaks. Surface plasmonic resonance, photonics, crystal structures, and optical properties of TMNs have been used to regulate metal ion release, produce oxidative stress, and generate heat for bactericidal applications. The superior properties of TMNs provide a chance to investigate and improve their antimicrobial actions, perhaps leading to therapeutic interventions. In this review, we discuss three alternative antibacterial strategies based on TMNs of photodynamic therapy, photothermal therapy, and metal ion release and their mechanistic actions. The scientific community has made significant efforts to address the safety, effectiveness, toxicity, and biocompatibility of these metallic nanostructures; significant achievements and trends have been highlighted in this review. The combination of therapies together has borne significant results to counter antimicrobial resistance (4-log reduction). These three antimicrobial pathways are separated into subcategories based on recent successes, highlighting potential needs and challenges in medical, environmental, and allied industries.

Interfacial Mo, W-Conjugated Polarization, and Oxygen Vacancies of MoO2/WO3 in Enhanced Microwave Therapy for MRSA-Induced Osteomyelitis

Deep tissue infection, such as osteomyelitis, caused by methicillin-resistant Staphylococcus aureus (MRSA) infection, poses a serious threat to public health and cannot be effectively treated by antibiotics. In this study, we report a microwave (MW)-responsive MoO₂/WO₃ heterojunction that can be utilized to effectively treat MRSA-infected osteomyelitis under MW irradiation because of the enhanced MW thermal effect and MW catalysis of the composite. The underlying mechanism is as follows: A myriad of oxygen vacancies forms on the surface of MoO₂ and WO₃ by deoxidization effect with hydrogen from the decomposition of sodium borohydride, which induces a mass of free electrons on the surface of the composite and consequently promotes a localized surface plasmon resonance effect (LSPR) under MW irradiation. Furthermore, the conjugation of Mo and W at the interface enhances the LSPR effect. Thus, the LSPR effect not only induces the formation of radical oxygen species, thereby enhancing MW catalysis, but also results in the formation of an interfacial electrical field, which strengthens dipole polarization through synergistic action with oxygen vacancies and contributes to better MW thermal effects. The characteristics of MoO₂/WO₃ prove to be promising for the treatment of deep-tissue infections under MW irradiation.

Canvassing Prospects of Glyco-Nanovaccines for Developing Cross-Presentation Mediated Anti-Tumor Immunotherapy

In view of the severe downsides of conventional cancer therapies, the quest of developing alternative strategies still remains of critical importance. In this regard, antigen cross-presentation, usually employed by dendritic cells (DCs), has been recognized as a potential solution to overcome the present impasse in anti-cancer therapeutic strategies. It has been established that an elevated cytotoxic T lymphocyte (CTL) response against cancer cells can be achieved by targeting receptors expressed on DCs with specific ligands. Glycans are known to serve as ligands for C-type lectin receptors (CLRs) expressed on DCs, and are also known to act as a tumor-associated antigen (TAA), and, thus, can be harnessed as a potential immunotherapeutic target. In this scenario, integrating the knowledge of cross-presentation and glycan-conjugated nanovaccines can help us to develop so called 'glyco-nanovaccines' (GNVs) for targeting DCs. Here, we briefly review and analyze the potential of GNVs as the next-generation anti-tumor immunotherapy. We have compared different antigen-presenting cells (APCs) for their ability to cross-present antigens and described the potential nanocarriers for tumor antigen cross-presentation. Further, we discuss the role of glycans in targeting of DCs, the immune response due to pathogens, and imitative approaches, along with parameters, strategies, and challenges involved in cross-presentation-based GNVs for cancer immunotherapy. It is known that the effectiveness of GNVs in eradicating tumors by inducing strong CTL response in the tumor microenvironment (TME) has been largely hindered by tumor glycosylation and the expression of different lectin receptors (such as galectins) by cancer cells. Tumor glycan signatures can be sensed by a variety of lectins expressed on immune cells and mediate the immune suppression which, in turn, facilitates immune evasion. Therefore, a sound understanding of the glycan language of cancer cells, and glycan-lectin interaction between the cancer cells and immune cells, would help in strategically designing the next-generation GNVs for anti-tumor immunotherapy.

Mangasese doped polypyrole nanoparticels for photothermal/chemodynamic therapy and immune activation

Photothermal therapy (PTT) is a promising treatment that efficiently suppresses local cancer, but fails to induce a robust antitumor immune response against tumor metastasis and recurrence. In this study, a NIR responsive nano-immunostimulant (Mn/A-HP NI) is fabricated by entrapping manganese and azo-initiator (AIPH) into hyaluronic acid-based polypyrrole nanoparticle. The as-prepared Mn/A-HP NIs with a high photothermal conversion efficiencey of 20.17% dramatically induced the imunogenic cell death of tumor cells and triggered the release ATP and HMGB1. Meanwhile, the hyperthermia induced AIPH decomposition to produce alkyl radicals which further destroyed cancer cells. Furthermore, the Mn/A-HP NIs were capable of promoting the maturation and antigen cross-presentation ability of dendritic cells. Consequently, the multifunctional Mn/A-HP NIs provided a combined treatment via integrating PTT/chemo-dynamic therapy and immune activation for tumor therapy.

Role of RNA m6A modification in titanium dioxide nanoparticle-induced acute pulmonary injury: An in vitro and in vivo study

RNA N⁶-methyladenosine (m⁶A) modification regulates the cell stress response and homeostasis, but whether titanium dioxide nanoparticle (nTiO₂)-induced acute pulmonary injury is associated with the m⁶A epitranscriptome and the underlying mechanisms remain unclear. Here, the potential association between m⁶A modification and the bioeffects of several engineered nanoparticles (nTiO₂, nAg, nZnO, nFe₂O₃, and nCuO) were verified thorough in vitro experiments. nFe₂O₃, nZnO, and nTiO₂ exposure significantly increased the global m⁶A level in A549 cells. Our study further revealed that nTiO₂ can induce m⁶A-mediated acute pulmonary injury. Mechanistically, nTiO₂ exposure promoted methyltransferase-like 3 (METTL3)-mediated m⁶A signal activation and thus mediated the inflammatory response and IL-8 release through the degeneration of anti-Mullerian hormone (AMH) and Mucin5B (MUC5B) mRNAs in a YTH m⁶A RNA-binding protein 2 (YTHDF2)-dependent manner. Moreover, nTiO₂ exposure stabilized METTL3 protein by the lipid reactive oxygen species (ROS)-activated ERK1/2 pathway. The scavenging of ROS with ferrostatin-1 (Fer-1) alleviates the ERK1/2 activation, m⁶A upregulation, and the inflammatory response caused by nTiO₂ both in vitro and in vivo. In conclusion, our study demonstrates that m⁶A is a potential intervention target for alleviating the adverse effects of nTiO₂-induced acute pulmonary injury in vitro and in vivo, which has far-reaching implications for protecting human health and improving the sustainability of nanotechnology.

A synergistic chemodynamic-photodynamic-photothermal therapy platform based on biodegradable Ce-doped MoOx nanoparticles

Near-infrared light-induced catalysts are considered to be potential nanoagents for tumor therapy. Cerium (Ce) is a non-biotoxic lanthanide element and exhibits variable valence states for catalytic reactions. In this work, we report a one-step hydrothermal synthesis for Ce-doped MoO_x (CMO) nanomaterials. The obtained CMO nanomaterials show high absorption in the NIR II regime and a high photothermal conversion efficiency of 67.7% (1064 nm). Moreover, due to the doping of Ce element, the consumption of hydrogen peroxide (H₂O₂) and glutathione (GSH) is boosted which enhances the chemodynamic and photodynamic therapy simultaneously. Under NIR II laser irradiation, the designed CMO nanocatalysts induce metabolism disruption and mitochondrial damage in the tumor cells. As-prepared CMO nanomaterials also show good biocompatibility and pH-responsive degradation behavior, which can be degraded rapidly under alkaline conditions (pH = 7.4) and remain stable in acidic solution (pH = 5.6). These properties make CMO nanomaterials ideal biodegradable nanotheranostic agents for synergistic chemodynamic-photodynamic-photothermal antitumor therapy.

Strong electronic metal-support interaction between Pt and stainless mesh for enhancing the hydrogen evolution reaction

Strong electronic metal-support interaction (EMSI) can tailor the electronic structure of electrocatalysts. Herein, Pt nanoparticles anchored on stainless mesh (SM) via EMSI engineering are reported, exhibiting excellent hydrogen production activity. Theoretical calculations demonstrate that the superior performance stems from the strong EMSI between Pt atoms and Fe atoms in SM.

Vacancy defect-promoted nanomaterials for efficient phototherapy and phototherapy-based multimodal Synergistic Therapy

Phototherapy and multimodal synergistic phototherapy (including synergistic photothermal and photodynamic therapy as well as combined phototherapy and other therapies) are promising to achieve accurate diagnosis and efficient treatment for tumor, providing a novel opportunity to overcome cancer. Notably, various nanomaterials have made significant contributions to phototherapy through both improving therapeutic efficiency and reducing side effects. The most key factor affecting the performance of phototherapeutic nanomaterials is their microstructure which in principle determines their physicochemical properties and the resulting phototherapeutic efficiency. Vacancy defects ubiquitously existing in phototherapeutic nanomaterials have a great influence on their microstructure, and constructing and regulating vacancy defect in phototherapeutic nanomaterials is an essential and effective strategy for modulating their microstructure and improving their phototherapeutic efficacy. Thus, this inspires growing research interest in vacancy engineering strategies and vacancy-engineered nanomaterials for phototherapy. In this review, we summarize the understanding, construction, and application of vacancy defects in phototherapeutic nanomaterials. Starting from the perspective of defect chemistry and engineering, we also review the types, structural features, and properties of vacancy defects in phototherapeutic nanomaterials. Finally, we focus on the representative vacancy defective nanomaterials recently developed through vacancy engineering for phototherapy, and discuss the significant influence and role of vacancy defects on phototherapy and multimodal synergistic phototherapy. Therefore, we sincerely hope that this review can provide a profound understanding and inspiration for the design of advanced phototherapeutic nanomaterials, and significantly promote the development of the efficient therapies against tumor.

Photothermal conversion and transfer in photothermal therapy: From macroscale to nanoscale

Photothermal therapy (PTT) is a promising alternative therapy for benign or even malignant tumors. To improve the selective heating of tumor cells, target-specific photothermal conversion agents are often included, especially nanoparticles. Meanwhile, some indirect methods by manipulating the radiation and heat delivery are also adopted. Therefore, to gain a clear understanding of the mechanism, and to improve the controllability of PTT, a few issues need to be clarified, including bioheat and radiation transfer, localized and collective heating of nanoparticles, etc. In this review, we provide an introduction to the typical bioheat transfer and radiation transfer models along with the dynamic thermophysical properties of biological tissue. On this basis, we reviewed the most recent advances in the temperature control methods in PTT from macroscale to nanoscale. Most importantly, a comprehensive introduction of the localized and collective heating effects of nanoparticle clusters is provided to give a clear insight into the mechanism for PPT from the microscale and nanoscale point of view.

Polydopamine-modified ZIF-8 nanoparticles as a drug carrier for combined chemo-photothermal osteosarcoma therapy

Single chemotherapy often causes severe adverse effects and chemoresistance which limits therapeutic efficacy. Recently, combination of chemotherapy with photothermal therapy (PTT) have received broad attention for synergistic treatment of osteosarcoma, ultimately resulting in the enhancement of therapeutic efficacy of anticancer drugs. In this study, we have developed a novel drug delivery system based on polydopamine (pDA)-modified ZIF-8 nanoparticles loaded with methotrexate (MTX) (pDA/MTX@ZIF-8 NPs). Herein, pDA modification avoided the explosive release of the drug, and improved the biocompatibility and near-infrared (NIR) light absorbance performance of nanoparticles. The as-prepared pDA/MTX@ZIF-8 NPs could be used as drug targeting delivery system and simultaneously displayed excellent photothermal effects under NIR irradiation. Biology assays in vitro indicated that the pDA/MTX@ZIF-8 NPs were able to efficiently induce MG63 cell apoptosis through reducing mitochondrial membrane potentials (MMPs), and the introduction of photothermal agents enhanced the antitumor effect and decreased the dose of chemotherapeutic drugs. Moreover, the optimized pDA/MTX@ZIF-8 NPs (40 μg/mL) exhibited better photothermal conversion performance and facilitated tumor cells death. These results triumphantly exhibit that the pDA/MTX@ZIF-8 NPs have a synergistic effect of chemo-photothermal therapy (combination index CI = 0.346) and excellent biocompatibility, which has unexceptionable prospects for the therapy of osteosarcoma.

Layered double hydroxide-based nanomaterials for biomedical applications

Against the backdrop of increased public health awareness, inorganic nanomaterials have been widely explored as promising nanoagents for various kinds of biomedical applications. Layered double hydroxides (LDHs), with versatile physicochemical advantages including excellent biocompatibility, pH-sensitive biodegradability, highly tunable chemical composition and structure, and ease of composite formation with other materials, have shown great promise in biomedical applications. In this review, we comprehensively summarize the recent advances in LDH-based nanomaterials for biomedical applications. Firstly, the material categories and advantages of LDH-based nanomaterials are discussed. The preparation and surface modification of LDH-based nanomaterials, including pristine LDHs, LDH-based nanocomposites and LDH-derived nanomaterials, are then described. Thereafter, we systematically describe the great potential of LDHs in biomedical applications including drug/gene delivery, bioimaging diagnosis, cancer therapy, biosensing, tissue engineering, and anti-bacteria. Finally, on the basis of the current state of the art, we conclude with insights on the remaining challenges and future prospects in this rapidly emerging field.

Quantitative Comparison of the Light-to-Heat Conversion Efficiency in Nanomaterials Suitable for Photothermal Therapy

Functional colloidal nanoparticles capable of converting between various energy types are finding an increasing number of applications. One of the relevant examples concerns light-to-heat-converting colloidal nanoparticles that may be useful for localized photothermal therapy of cancers. Unfortunately, quantitative comparison and ranking of nanoheaters are not straightforward as materials of different compositions and structures have different photophysical and chemical properties and may interact differently with the biological environment. In terms of photophysical properties, the most relevant information to rank these nanoheaters is the light-to-heat conversion efficiency, which, along with information on the absorption capacity of the material, can be used to directly compare materials. In this work, we evaluate the light-to-heat conversion properties of 17 different nanoheaters belonging to different groups (plasmonic, semiconductor, lanthanide-doped nanocrystals, carbon nanocrystals, and metal oxides). We conclude that the light-to-heat conversion efficiency alone is not meaningful enough as many materials have similar conversion efficiencies─in the range of 80-99%─while they significantly differ in their extinction coefficient. We therefore constructed their qualitative ranking based on the external conversion efficiency, which takes into account the conventionally defined light-to-heat conversion efficiency and its absorption capacity. This ranking demonstrated the differences between the samples more meaningfully. Among the studied systems, the top-ranking materials were black porous silicon and CuS nanocrystals. These results allow us to select the most favorable materials for photo-based theranostics and set a new standard in the characterization of nanoheaters.

Photothermally responsive theranostic nanocomposites for near-infrared light triggered drug release and enhanced synergism of photothermo-chemotherapy for gastric cancer

Near-infrared (NIR) photothermal therapy plays a critical role in the cancer treatment and diagnosis as a promising carcinoma treatment modalities nowadays. However, development of clinical application has been greatly limited due to the inefficient drug release and low tumor accumulation. Herein, we designed a NIR-light triggered indocyanine green (ICG)-based PCL core/P(MEO₂MA-b-HMAM) shell nanocomposites (PPH@ICG) and evaluated their therapeutic effects in vitro and in vivo. The anticancer drug 5-fluorouracil (5Fu) and the photothermal agent ICG were loaded into a thermo-sensitive micelle (PPH@5Fu@ICG) by self-assembly. The nanoparticles formed were characterized using transmission electron microscopy, dynamic light scattering, and fluorescence spectra. The thermo-sensitive copolymer (PPH@5Fu@ICG) showed a great temperature-controlled drug release response with lower critical solution temperature. In vitro cellular uptake and TEM imaging proved that PPH@5Fu@ICG nanoparticles can home into the lysosomal compartments under NIR. Moreover, in gastric tumor-bearing nude mice, PPH@5Fu@ICG + NIR group exhibited excellent improvement in antitumor efficacy based on the NIR-triggered thermo-chemotherapy synergy, both in vitro and in vivo. In summary, the proposed strategy of synergistic photo-hyperthermia chemotherapy effectively reduced the 5Fu dose, toxic or side effect, which could serve as a secure and efficient approach for cancer theranostics.

Atropine-Phosphotungestate Polymeric-Based Metal Oxide Nanoparticles for Potentiometric Detection in Pharmaceutical Dosage Forms

The new research presents highly conductive polymeric membranes with a large surface area to volume ratio of metal oxide nanoparticles that were used to determine atropine sulfate (AT) in commercial dosage forms. In sensing and biosensing applications, the nanomaterials zinc oxide (ZnONPs) and magnesium oxide (MgONPs) were employed as boosting potential electroactive materials. The electroactive atropine phosphotungstate (AT-PT) was created by combining atropine sulfate and phosphotungstic acid (PTA) and mixing it with polymeric polyvinyl chloride (PVC) with the plasticizer o-nitrophenyl octyl ether (o-NPOE). The modified sensors AT-PT-ZnONPs or AT-PT-MgONPs showed excellent selectivity and sensitivity for the measurements of atropine with a linear concentration range of 6.0 × 10⁻⁸ − 1.0 × 10⁻³ and 8.0 × 10⁻⁸ − 1.0 × 10⁻³ mol L⁻¹ with regression equations of E_(mV) = (56 ± 0.5) log [AT] − 294 and E_(mV) = (54 ± 0.5) log [AT] − 422 for AT-PT-NPs or AT-PT-MgONPs sensors, respectively. The AT-PT coated wire sensor, on the other hand, showed a Nernstian response at 4.0 × 10⁻⁶ − 1.0 × 10⁻³ mol L⁻¹ and a regression equation E_(mV) = (52.1 ± 0.2) log [AT] + 198. The methodology-recommended guidelines were used to validate the suggested modified potentiometric systems against various criteria.

Copper-based nanomaterials for cancer theranostics

Copper-based nanomaterials (Cu-based NMs) with favorable biocompatibility and unique properties have attracted the attention of many biomedical researchers. Cu-based NMs are one of the most widely studied materials in cancer treatment. In recent years, great progress has been made in the field of biomedicine, especially in the treatment and diagnosis of tumors. This review begins with the classification of Cu-based NMs and the recent synthetic strategies of Cu-based NMs. Then, according to the abundant and special properties of Cu-based NMs, their application in biomedicine is summarized in detail. For biomedical imaging, such as photoacoustic imaging, positron emission tomography imaging, and multimodal imaging based on Cu-based NMs are summarized, as well as strategies to improve the diagnostic effectiveness. Moreover, a series of unique structures and functions as well as the underlying property activity relationship of Cu-based NMs were shown to highlight their promising therapeutic performance. Cu-based NMs have been widely used in monotherapies, such as photothermal therapy (PTT) and chemodynamic therapy (CDT). Moreover, the sophisticated design in composition, structure, and surface fabrication of Cu-based NMs can endow these NMs with more modalities in cancer diagnosis and therapy. To further improve the efficiency of cancer treatment, combined therapy based on Cu-based NMs was introduced in detail. Finally, the challenges, critical factors, and future prospects for the clinical translation of Cu-based NMs as multifunctional theranostic agents were also considered and discussed. The aim of this review is to provide a better understanding and key consideration for the rational design of this increasingly important new paradigm of Cu-based NMs as theranostic agents. This article is categorized under: Therapeutic Approaches and Drug Discovery > Nanomedicine for Oncologic Disease Diagnostic Tools > In Vivo Nanodiagnostics and Imaging.

Growth of Cu2O Nanoparticles on Two-Dimensional Zr-Ferrocene-Metal-Organic Framework Nanosheets for Photothermally Enhanced Chemodynamic Antibacterial Therapy

Two-dimensional (2D) metal-organic framework (MOF) nanosheets have been demonstrated to be promising templates for the growth of various kinds of nanomaterials on their surfaces to construct novel 2D composites, thus realizing enhanced performance in various applications. Herein, we report the growth of Cu₂O nanoparticles on 2D Zr-ferrocene (Zr-Fc)-MOF (Zr-Fc-MOF) nanosheets to prepare 2D composites for near-infrared (NIR) photothermally enhanced chemodynamic antibacterial therapy. The uniform Zr-Fc-MOF nanosheets are synthesized using the solvothermal method, followed by ultrasound sonication, and Cu₂O nanoparticles are then deposited on its surface to obtain the Cu₂O-decorated Zr-Fc-MOF (denoted as Cu₂O/Zr-Fc-MOF) 2D composite. Promisingly, the Cu₂O/Zr-Fc-MOF composite shows higher chemodynamic activity for producing ·OH via Fenton-like reaction than that of the pristine Zr-Fc-MOF nanosheets. More importantly, the chemodynamic activity of the Cu₂O/Zr-Fc-MOF composite can be further enhanced by the photothermal effect though NIR laser (808 nm) irradiation. Thus, the Cu₂O/Zr-Fc-MOF composite can be used as an efficient nanoagent for photothermally enhanced chemodynamic antibacterial therapy.

Preparation of Dye Molecule-Intercalated MoO3 Organic/Inorganic Superlattice Nanoparticles for Fluorescence Imaging-Guided Catalytic Therapy

Intercalation of organic molecules into the van der Waals gaps of layered materials allows for the preparation of organic/inorganic superlattices for varying promising applications. Herein, the preparation of a series of dye molecule/MoO₃ organic/inorganic superlattice nanoparticles by aqueous intercalation of several dye molecules into layered MoO₃ for fluorescence imaging-guided catalytic therapy is reported. The long MoO₃ nanobelts are treated by ball milling and subsequent aqueous intercalation followed by a cation ion exchange to obtain the dye molecule-intercalated MoO₃ organic/inorganic superlattices. Importantly, because of the activation induced by organic intercalation, the Nile blue (NB)-intercalated MoO_3-x (NB-MoO_3-x ) nanoparticles show excellent catalytic activity for the generation of reactive oxygen species, that is, hydroxyl radical (·OH) and superoxide anion (·O₂^- ), through catalyzing H₂ O₂ and O₂ , respectively. Moreover, the intense fluorescence of the intercalated NB molecules endows NB-MoO_3-x with the in vivo fluorescence imaging capability. Thus, the polyvinylpyrrolidone-modified NB-MoO_3-x nanoparticles can be used for tumor-specific catalytic therapy to realize efficient cancer cell elimination in vitro and fluorescence imaging-guided tumor ablation in vivo.

Transforming Commercial Copper Sulfide into Injectable Hydrogels for Local Photothermal Therapy

Photothermal therapy (PTT) is a promising local therapy playing an increasingly important role in tumor treatment. To maximize PTT efficacy, various near-infrared photoabsorbers have been developed. Among them, metal sulfides have attracted considerable interest due to the advantages of good stability and high photothermal conversion efficiency. However, the existing synthesis methods of metal-sulfide-based photoabsorbers suffer from the drawbacks of complicated procedures, low raw material utilization, and poor universality. Herein, we proposed a flexible, adjustable strategy capable of transforming commercial metal sulfides into injectable hydrogels for local PTT. We took copper sulfide (CuS) as a typical example, which has intense second-window near-infrared absorption (1064 nm), to systematically investigate its in vitro and in vivo characteristics. CuS hydrogel with good syringeability was synthesized by simply dispersing commercial CuS powders as photoabsorbers in alginate-Ca²⁺ hydrogel. This synthesis strategy exhibits the unique merits of an ultra-simple synthesizing process, 100% loading efficiency, good biocompatibility, low cost, outstanding photothermal capacity, and good universality. The in vitro experiments indicated that the hydrogel exhibits favorable photothermal heating ability, and it obviously destroyed tumor cells under 1064 nm laser irradiation. After intratumoral administration in vivo, large-sized CuS particles in the hydrogel highly efficiently accumulated in tumor tissues, and robust local PTT was realized under mild laser irradiation (0.3 W/cm²). The developed strategy for the synthesis of CuS hydrogel provides a novel way to utilize commercial metal sulfides for diverse biological applications.

Low-temperature photothermal irradiation triggers alkyl radicals burst for potentiating cancer immunotherapy

Although low-temperature photothermal therapy (PTT) can sensitize tumors to immune checkpoint inhibition, its efficacy is still restricted in the deep and internal tumors without enough oxygen and lymphocytic infiltration. Non-oxygen-dependent alkyl radicals have been demonstrated to synergistically enhance PTT through up-regulating lipid peroxidation and reactive oxygen species (ROS). Herein, an innovative strategy based on alkyl radicals to augment immunogenetic cell death (ICD) caused by mild PTT was proposed to improve poor efficacy of immunotherapy, which composed of a photothermal material of Chinse ink, an azo-initiator of 2,2-azobis[2-(2-imidazoline-2-acyl)propane]dihydrochloride (AIPH) and a PD-L1 inhibitor of HY19991 (HY). Upon near-infrared-II laser irradiation, low-temperature (<45℃) stimulation induced a high expression of immune checkpoint receptor (PD-L1) in tumors and triggered a large amount alkyl radicals generated by AIPH. Significantly, the alkyl radicals augmented the ICD and increased the recruitment of tumor-infiltrating lymphocytes against tumors after transformation of the immunologically cold tumor microenvironment into hot by mild PTT. The released HY further enhanced the immunotherapy effect by blocking the binding of activated T lymphocytes and PD-L1. In vivo studies exhibited that the all-in-one hydrogel with synergistic mechanisms had an extraordinary ability to reverse the immunosuppressive microenvironment, stimulate innate and adaptive immune responses to eliminate tumors and prevent metastasis.

Copper Ion and Ruthenium Complex Codoped Polydopamine Nanoparticles for Magnetic Resonance/Photoacoustic Tomography Imaging-Guided Photodynamic/Photothermal Dual-Mode Therapy

Phototherapy, such as photodynamic therapy (PDT) and photothermal therapy (PTT), refers to the therapeutic strategy using a visible or near-infrared (NIR) laser to generate free radicals or heat for noninvasive and localized tumor treatment. However, limited by the low photoconversion efficiency of therapeutic agents, a single treatment method can hardly lead to complete tumor ablation, even when enhancing the power density of the laser and/or prolonging the irradiation duration. In this work, copper ion and ruthenium complex codoped polydopamine nanoparticles (Cu(II)/LRu/PDA NPs) are designed for PDT/PTT dual-mode therapy. The doped LRu in the NPs can generate reactive oxygen species under visible laser irradiation and enable PDT. Because of the strong absorption in the NIR region, PDA can not only generate heat for PTT under irradiation but also be used for photoacoustic tomography (PAT) imaging. Meanwhile, the doping of Cu(II) in the NPs through the coordination with PDA facilitates T₁-weighted magnetic resonance imaging (MRI). Thus, MR/PAT imaging-guided PDT/PTT dual-mode therapy is achieved. The in vivo experiments indicate that the Cu(II)/LRu/PDA NPs can accumulate in HeLa tumors with a retention rate up to 8.34%ID/g. MR/PAT imaging can clearly identify the location and boundary of the tumors, permitting precise guidance for phototherapy. Under the combined effect of PDT and PTT, a complete ablation of HeLa tumors is achieved. The current work provides an alternative nanoplatform for performing PDT/PTT dual-mode therapy, which can be further guided by MR/PAT imaging.

Intercalation-Activated Layered MoO3 Nanobelts as Biodegradable Nanozymes for Tumor-Specific Photo-Enhanced Catalytic Therapy

The existence of natural van der Waals gaps in layered materials allows them to be easily intercalated with varying guest species, offering an appealing strategy to optimize their physicochemical properties and application performance. Herein, we report the activation of layered MoO₃ nanobelts via aqueous intercalation as an efficient biodegradable nanozyme for tumor-specific photo-enhanced catalytic therapy. The long MoO₃ nanobelts are grinded and then intercalated with Na⁺ and H₂ O to obtain the short Na⁺ /H₂ O co-intercalated MoO_3-x (NH-MoO_3-x ) nanobelts. In contrast to the inert MoO₃ nanobelts, the NH-MoO_3-x nanobelts exhibit excellent enzyme-mimicking catalytic activity for generation of reactive oxygen species, which can be further enhanced by the photothermal effect under a 1064 nm laser irradiation. Thus, after bovine serum albumin modification, the NH-MoO_3-x nanobelts can efficiently kill cancer cells in vitro and eliminate tumors in vivo facilitating with 1064 nm laser irradiation.

Recent Development of MOF-Based Photothermal Agent for Tumor Ablation

Metal-organic frameworks (MOFs) are 3D-architecture compounds of metal ions and organic molecules with sufficient and permanent porosity, showing great potential as a versatile platform to load various functional moieties to endow the hybrid materials with specific applications. Currently, a variety of photothermal nanometals have been embedded into organic ligands for integrating the unique photothermal effects with the merits of MOFs to improve their performances for cancer therapy. In this review, we have summarized a series of novel MOF-based photothermal materials for this unique therapeutic modality against tumors from three main aspects according to their chemical compositions and structures, i) metal-doped MOF, ii) organic-doped MOF, and iii) polymer-coated MOF. In addition, we have summarized the latest developments and characteristics of MOF-based photothermal agents, such as good biocompatibility, low toxicity, and responsive photothermal conversion without destroying the structure of hybrid photothermal agent. At last, we addressed the future perspectives of MOF-based photothermal agent in the field of phototherapy.

Metallic phase enabling MoS2 nanosheets as an efficient sonosensitizer for photothermal-enhanced sonodynamic antibacterial therapy

Two-dimensional (2D) transition metal dichalcogenide (TMD) nanosheets (e.g., MoS₂) with metallic phase (1T or 1T´ phase) have been proven to exhibit superior performances in various applications as compared to their semiconducting 2H-phase counterparts. However, it remains unclear how the crystal phase of 2D TMD nanosheets affects their sonodynamic property. In this work, we report the preparation of MoS₂ nanosheets with different phases (metallic 1T/1T´ or semiconducting 2H) and exploration of its crystal-phase effect on photothermal-enhanced sonodynamic antibacterial therapy. Interestingly, the defective 2D MoS₂ nanosheets with high-percentage metallic 1T/1T´ phase (denoted as M-MoS₂) present much higher activity towards the ultrasound-induced generation of reactive oxygen species (ROS) as compared to the semiconducting 2H-phase MoS₂ nanosheets. More interestingly, owing to its metallic phase-enabled strong absorption in the near-infrared-II (NIR-II) regime, the ultrasound-induced ROS generation performance of the M-MoS₂ nanosheets can be further enhanced by the photothermal effect under a 1064 nm laser irradiation. Thus, after modifying with polyvinylpyrrolidone, the M-MoS₂ nanosheets can be used as an efficient sonosensitizer for photothermal-enhanced sonodynamic bacterial elimination under ultrasound treatment combining with NIR-II laser irradiation. This study demonstrates that metallic MoS₂ nanosheets can be used as a promising sonosensitizer for antibacterial therapy, which might be also promising for cancer therapies.

Recent Advances in Single Fe-Based Nanoagents for Photothermal-Chemodynamic Cancer Therapy

Monomodal cancer therapies are often unsatisfactory, leading to suboptimal treatment effects that result in either an inability to stop growth and metastasis or prevent relapse. Thus, synergistic strategies that combine different therapeutic modalities to improve performance have become the new research trend. In this regard, the integration of photothermal therapy (PTT) with chemodynamic therapy (CDT), especially PTT/CDT in the second near-infrared (NIR-II) biowindow, has been demonstrated to be a highly efficient and relatively safe concept. With the rapid development of nanotechnology, nanoparticles can be designed from specific elements, such as Fe, that are equipped with both PTT and CDT therapeutic functions. In this review, we provide an update on the recent advances in Fe-based nanoplatforms for combined PTT/CDT. The perspectives on further improvement of the curative efficiency are described, highlighting the important scientific obstacles that require resolution in order to reach greater heights of clinical success. We hope this review will inspire the interest of researchers in developing novel Fe-based nanomedicines for multifunctional theranostics.

A CuS- and BODIPY-loaded nanoscale covalent organic framework for synergetic photodynamic and photothermal therapy

Herein, we report an inorganic photothermal agent, CuS- and an organic photosensitizer, BODIPY-loaded composite nanoscale COF material via a stepwise post-synthetic modification. The obtained CuS@COF-BDP can be a dual-modal therapeutic agent to highly inhibit MCF-7 tumor cell proliferation due to its efficient singlet oxygen generation and photothermal conversion abilities.