Recent Progress on Fe-Based Single/Dual-Atom Catalysts for Zn-Air Batteries

Single-Atom Catalysts on Covalent Organic Frameworks for Energy Applications

Single-atom catalysts (SACs) have been investigated and applied to energy conversion devices. However, issues of metal agglomeration, low metal loading, and substrate stability have hindered realization of the SACs' full potential. Recently, covalent organic framework (COF)-based SACs have emerged as promising materials to enable highly efficient catalytic reactions. Here, we summarize the representative COF-based SACs and their wide application in clean energy devices and conversion reactions, such as hydrogen evolution reaction, carbon dioxide reduction reaction, nitrogen reduction reaction, oxygen reduction reaction, and oxygen evolution reaction. Based on their catalysis conditions, these reactions are categorized into photocatalyzed and electrocatalyzed reactions. We also summarize their design strategies, including heteroatom inclusion, donor-acceptor pairs, pore engineering, interface engineering, etc. Although COF-based SACs are promising, more efforts, such as linkage engineering, functional groups, ionization, multifunctional sites for cocatalyzed systems, etc., could improve them to be the ideal SAC materials. At the end, we provide our perspectives on where the field will proceed in the next 5 years.

Recent Achievements in Heterogeneous Bimetallic Atomically Dispersed Catalysts for Zn-Air Batteries: A Minireview

Rechargeable Zn-air batteries (ZABs) hold promise as the next-generation energy-storage devices owing to their affordability, environmental friendliness, and safety. However, cathodic catalysts are easily inactivated in prolonged redox potential environments, resulting in inadequate energy efficiency and poor cycle stability. To address these challenges, anodic active sites require multiple-atom combinations, that is, ensembles of metals. Heterogeneous bimetallic atomically dispersed catalysts (HBADCs), consisting of heterogeneous isolated single atoms and atomic pairs, are expected to synergistically boost the cyclic oxygen reduction and evolution reactions of ZABs owing to their tuneable microenvironments. This minireview revisits recent achievements in HBADCs for ZABs. Coordination environment engineering and catalytic substrate structure optimization strategies are summarized to predict the innovation direction for HBADCs in ZAB performance enhancement. These HBADCs are divided into ferrous and nonferrous dual sites with unique microenvironments, including synergistic effects, ion modulation, electronic coupling, and catalytic activity. Finally, conclusions and perspectives relating to future challenges and potential opportunities are provided to optimise the performance of ZABs.

Synergistic effects enabled efficient photocatalytic removal of ofloxacin antibiotic in wastewater by layered double hydroxides loaded lignin-derived carbon fibers

The environmental problems caused by the abuse of antibiotics are raising serious attention, and the removal of antibiotics in wastewater is meaningful yet challenging. In this work, lignin-derived carbon fibers loaded layered double hydroxides (LDH@LCF) has been prepared for the removal of ofloxacin (OFX) from wastewater via photocatalysis, which exhibit a high degradation efficiency of 96 % under visible light and maintained 90 % after five reuses. The effects of Zn2+/Fe3+ in the samples and other parameters affecting the photocatalytic efficiency of OFX have been systematically investigated. Results demonstrated that the enhanced photocatalytic efficiency is derived from the synergistic effect of the Zn2+ and Fe3+ in the LDH with a reduced band gap of the catalyst, higher number of oxygen and metal unsaturated coordination sites, and rapid removal of photogenerated electrons. The working mechanism and degradation pathways for OFX by LDH@LCF are also elucidated in detail.

Reconfiguring FeN4 sites through axial Fe2O3 clusters to enhance d-orbital electronic delocalization for improved oxygen reduction reaction

Effectively controlling the electronic configuration of metal sites within single-atom catalysts (SACs) is essential for improving their oxygen reduction reaction (ORR) performance. Here, we construct hybrid catalysts featuring Fe single atoms and Fe2O3 clusters (Fe SACs/Fe2O3@NHPC) to realize highly efficient ORR. Specifically, the Fe SACs/Fe2O3@NHPC delivers a remarkable half-wave potential (E1/2) of 0.893 V and endures 30,000 cycles with only 12 mV E1/2 loss in alkaline media. Liquid zinc-air batteries (ZABs) utilizing Fe SACs/Fe2O3@NHPC output a power density of 192.7 mW cm-2 and demonstrate rechargeability over 370 h without noticeable voltage degradation. Furthermore, theoretical calculations indicate that the axially coordinated Fe2O3 clusters significantly promote electronic delocalization in the 3d orbitals of the Fe sites. This electronic structure regulation strategy optimizes the hybridization between Fe-3d orbitals and O-2p orbitals, thereby facilitating the *OH dissociation process. This research not only provides intensive insight into the synergistic interactions and complementary effects between single-atom sites and clusters in hybrid catalysts but also lays the groundwork for designing SACs.

Efficient and durable oxygen reduction in alkaline media by doping heteroatomic boron into FeSA-NC catalyst

Despite extensive research has been conducted on atomic dispersion catalysts for various reactions, altering the electronic structure of the central metal to enhance electrochemical reactivity remains a challenging task. Herein, the electrochemical reactivity was considerably enhanced by introducing heteroatomic B to adjust the d-band of single Fe center. In specific, the obtained FeSA-BNC catalyst demonstrated an outstanding ORR performance (E1/2 = 0.87 V) and exhibited greater long-term durability in alkaline media compared to Pt/C. The performance of FeSA-BNC in Zn-air battery was also higher than that of Pt/C. According to theoretical calculations, a downward shift in the d-band center of Fe was induced by introducing B, thereby improving the desorption of intermediates and facilitating the oxygen reduction reaction (ORR).

Precisely Constructing Orbital-Coupled Fe─Co Dual-atom Sites for High-Energy-Efficiency Zn-Air/Iodide Hybrid Batteries

Rechargeable Zn-air batteries (ZABs) are promising for energy storage and conversion. However, the high charging voltage and low energy efficiency hinder their commercialization. Herein, these challenges are addressed by employing precisely constructed multifunctional Fe-Co diatomic site catalysts (FeCo-DACs) and integrating iodide/iodate redox into ZABs to create Zinc-air/iodide hybrid batteries (ZAIHBs) with highly efficient multifunctional catalyst. The strong coupling between the 3d orbitals of Fe and Co weakens the excessively strong binding strength between active sites and intermediates, enhancing the catalytic activities for oxygen reduction/evolution reaction and iodide/iodate redox. Consequently, FeCo-DACs exhibit outstanding bifunctional oxygen catalytic activity with a small potential gap (ΔE = 0.66 V) and outstanding stability. Moreover, an outstanding catalytic performance toward iodide/iodate redox is obtained. Therefore, FeCo-DAC-based ZAIHBs exhibit high energy efficiency of up to 75% at 10 mA cm-2 and excellent cycling stability (72% after 500 h). This research offers critical insights into the rational design of DACs and paves the way for high-energy efficiency energy storage devices.

Electric Double Layer Regulator Design through a Functional Group Assembly Strategy towards Long-Lasting Zinc Metal Batteries

Regulating the electric double layer (EDL) structure of the zinc metal anode by using electrolyte additives is an efficient way to suppress interface side reactions and facilitate uniform zinc deposition. Nevertheless, there are no reports investigating the proactive design of EDL-regulating additives before the start of experiments. Herein, a functional group assembly strategy is proposed to design electrolyte additives for modulating the EDL, thereby realizing a long-lasting zinc metal anode. Specifically, by screening ten common functional groups, N, N-dimethyl-1H-imidazole-1-sulfonamide (IS) is designed by assembling an imidazole group, characterized by its high adsorption capability on the zinc anode, and a sulfone group, which exhibits strong binding with Zn2+ ions. Benefiting from the adsorption functionalization of the imidazole group, the IS molecules occupy the position of H2O in the inner Helmholtz layer of the EDL, forming a molecular protective layer to inhibit H2O-induced side reactions. Meanwhile, the sulfone group in IS, acting as a binding site to Zn2+, promotes the de-solvation of Zn2+ ions, facilitating compact zinc deposition. Consequently, the utilization of IS significantly extending the cycling stability of Zn||Zn and Zn||NaV3O8 ⋅ 1.5H2O full cell. This study offers an innovative approach to the design of EDL regulators for high-performance zinc metal batteries.

2D arrays of hollow carbon nanoboxes: outward contraction-induced hollowing mechanism in Fe-N-C catalysts

Maximizing the utilization efficiency of monatomic Fe sites in Fe-N-C catalysts poses a significant challenge for their commercial applications. Herein, a structural and electronic dual-modulation is achieved on a Fe-N-C catalyst to substantially enhance its catalytic performance. We develop a facile multi-component ice-templating co-assembly (MIC) strategy to construct two-dimensional (2D) arrays of monatomic Fe-anchored hollow carbon nanoboxes (Fe-HCBA) via a novel dual-outward interfacial contraction hollowing mechanism. The pore engineering not only enlarges the physical surface area and pore volume but also doubles the electrochemically active specific surface area. Additionally, the unique 2D carbon array structure reduces interfacial resistance and promotes electron/mass transfer. Consequently, the Fe-HCBA catalysts exhibit superior oxygen reduction performance with a six-fold enhancement in both mass activity (1.84 A cm-2) and turnover frequency (0.048 e- site-1 s-1), compared to microporous Fe-N-C catalysts. Moreover, the incorporation of phosphorus further enhances the total electrocatalytic performance by three times by regulating the electron structure of Fe-N4 sites. Benefitting from these outstanding characteristics, the optimal 2D P/Fe-HCBA catalyst exhibits great applicability in rechargeable liquid- and solid-state zinc-air batteries with peak power densities of 186 and 44.5 mW cm-2, respectively.

Nickel-Induced charge transfer in semicoherent Co-Ni/Co6Mo6C Heterostructures for reversible oxygen electrocatalysis

To achieve high-performance Zn-air batteries (ZABs), the development of bifunctional air electrodes capable of efficiently mediating both the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER) is imperative. In this study, we present an N-doped carbon hollow nanorod encapsulating a semi-coherent Co-Ni/Co6Mo6C heterojunction, tailored for reversible oxygen catalysis. This nanohybrid demonstrated an ORR half-wave potential of 0.907 V alongside an OER overpotential of η10 = 352 mV. When incorporated into ZABs, this catalyst exhibited extraordinary performance metrics, including a high-power density of 343.7 mW/cm2, a specific capacity of 681 mAh/gZn, and enhanced durability. The distinctive electric field within the heterojunction facilitated electron transfer across the semi-coherent interface during reversible oxygen electrocatalysis, enhancing the adsorption and release of active intermediates. Thus, this heightened ORR-OER catalytic efficiency culminated in superior ZABs performance. Our findings afford a pivotal design paradigm for the advancement of productive bifunctional catalysts within the field of energy conversion technologies.

Bimetallic iron complex constructed clusters and single atoms neighboring structure to enhance oxygen reduction reaction performance

Electrocatalysts are useful in lowering the energy barrier in oxygen reduction reaction (ORR). In this study, a catalyst with neighboring Fe single-atom and cluster is created by adsorbing a bimetallic Fe complex onto N-doped carbon and then pyrolyzing it. The resulting catalyst has good performance and a half-wave potential of 0.89 V. When used in Zn-air batteries, the voltage drops by only 8.13 % after 145 h of cycling. Theoretical studies show that electrons transfer from neighboring clusters to single atoms and the catalyst has a lower d-band center. These reduce intermediate desorption energy, hence improving ORR performance. This work demonstrates the capacity to adjust the catalytic properties through the interaction of diverse metal structures, which helps to design more efficient catalysts.

Low-Potential Iodide Oxidation Enables Dual-Atom CoFe─N─C Catalysts for Ultra-Stable and High-Energy-Efficiency Zn-Air Batteries

The low energy efficiency and limited cycling life of rechargeable Zn-air batteries (ZABs) arising from the sluggish oxygen reduction/evolution reactions (ORR/OERs) severely hinder their commercial deployment. Herein, a zeolitic imidazolate framework (ZIF)-derived strategy associated with subsequent thermal fixing treatment is proposed to fabricate dual-atom CoFe─N─C nanorods (Co1 Fe1 ─N─C NRs) containing atomically dispersed bimetallic Co/Fe sites, which can promote the energy efficiency and cyclability of ZABs simultaneously by introducing the low-potential oxidation redox reactions. Compared to the mono-metallic nanorods, Co1 Fe1 ─N─C NRs exhibit remarkable ORR performance including a positive half-wave potential of 0.933 V versus reversible hydrogen electrode (RHE) in alkaline electrolyte. Surprisingly, after introducing the potassium iodide (KI) additive, the oxidation overpotential of Co1 Fe1 ─N─C NRs to reach 10 mA cm-2 can be significantly reduced by 395 mV compared to the conventional destructive OER. Theoretical calculations show that the markedly decreased overpotential of iodide oxidation can be ascribed to the synergistic effects of neighboring Co─Fe diatomic sites as the unique adsorption sites. Overall, aqueous ZABs assembled with Co1 Fe1 ─N─C NRs and KI as the air-cathode catalyst and electrolyte additive, respectively, can deliver a low charging voltage of 1.76 V and ultralong cycling stability of over 230 h with a high energy efficiency of ≈68%.

Ternary Heteroatomic Doping Induced Microenvironment Engineering of Low Fe-N4-Loaded Carbon Nanofibers for Bifunctional Oxygen Electrocatalysis

Fabricating highly efficient and long-life redox bifunctional electrocatalysts is vital for oxygen-related renewable energy devices. To boost the bifunctional catalytic activity of Fe-N-C single-atom catalysts, it is imperative to fine-tune the coordination microenvironment of the Fe sites to optimize the adsorption/desorption energies of intermediates during oxygen reduction/evolution reactions (ORR/OER) and simultaneously avoid the aggregation of atomically dispersed metal sites. Herein, a strategy is developed for fabricating a free-standing electrocatalyst with atomically dispersed Fe sites (≈0.89 wt.%) supported on N, F, and S ternary-doped hollow carbon nanofibers (FeN4 -NFS-CNF). Both experimental and theoretical findings suggest that the incorporation of ternary heteroatoms modifies the charge distribution of Fe active centers and enhances defect density, thereby optimizing the bifunctional catalytic activities. The efficient regulation isolated Fe centers come from the dual confinement of zeolitic imidazole framework-8 (ZIF-8) and polymerized ionic liquid (PIL), while the precise formation of distinct hierarchical three-dimensional porous structure maximizes the exposure of low-doping Fe active sites and enriched heteroatoms. FeN4 -NFS-CNF achieves remarkable electrocatalytic activity with a high ORR half-wave potential (0.90 V) and a low OER overpotential (270 mV) in alkaline electrolyte, revealing the benefit of optimizing the microenvironment of low-doping iron single atoms in directing bifunctional catalytic activity.

g-C3N4 promoted MOF-derived Fe single atoms anchored on N-doped hierarchically porous carbon for high-performance Zn-air batteries

Exploring efficient, easy-to-manufacture, and inexpensive bifunctional electrocatalysts with abundant accessible active sites is crucial for rechargeable zinc-air batteries (ZABs). Herein, we report the strategy consisting of the space confinement and pore-making engineering to fabricate single-atom catalyst enriched with Fe-N4 sites anchored on N-doped hierarchically porous carbon (Fe-NC-C3N4). The optimized Fe-NC-C3N4 exhibits excellent oxygen reduction/evolution reaction (ORR/OER) activities with a half-wave potential (E1/2) of 0.90 V vs. RHE and a promising low overpotential of 0.305 V vs. RHE at 10 mA·cm-2 in alkaline electrolyte. These superior catalytic activities are attributed to the combined effect between the atomic active sites and the well-balanced micro-meso-macropore structures. The homemade liquid Zn-air battery (ZAB) assembled with Fe-NC-C3N4 catalyst displays a power density of 133.59 mW·cm-2 and a significant energy density of 882.58 mAh·g-1, exceeding those of the equipment with commercial Pt/C-RuO2 (56.82 mW·cm-2 and 643.87 mAh·g-1, respectively). Particularly, the corresponding flexible wearable ZAB manifests outstanding foldability and cyclical stability. This work opens a new perspective for the structural design of single-atom catalysts in the energy storage and conversion area.

A Versatile Extended Stöber Approach to Monodisperse Sub-40 nm Carbon Nanospheres for Stabilizing Atomically Dispersed Fe─N4 Sites Toward Efficient Oxygen Reduction Electrocatalysis

The development of atomically dispersed iron-nitrogen-carbon (Fe─N─C) catalysts as an alternative to precious platinum holds great potential for the substantial progress of a variety of oxygen reduction reaction (ORR)-associated energy conversion technologies. Nevertheless, the precise synthesis of Fe─N─C single atomic catalysts (SACs) with a high density of accessible active sites and pronounced electrocatalytic performance still remains an enormous challenge. Herein, an innovative extended Stöber method is designed for the controllable preparation of monodisperse small-sized N-doped carbon colloidal nanospheres (≈40 nm) anchoring atomically isolated Fe─N4 sites (abbreviated as Fe-SA@N-CNSs hereafter) with a narrow size distribution and high uniformity. Benefiting from the single Fe─N4 moieties and the unique spherical carbon substrate, the resultant Fe-SA@N-CNSs exhibit excellent ORR activity, outstanding long-term durability, and methanol tolerance in KOH electrolyte. More impressively, when further assembled into a flexible solid-state rechargeable zinc-air battery (ZAB), the Fe-SA@N-CNSs-driven ZAB delivers a higher open circuit voltage, a larger power density, and robust cycling/mechanical stability, outperforming the state-of-the-art Pt/C-based counterpart and further testifying the great potential of the as-prepared Fe-SA@N-CNSs in diverse ORR-related practical energy devices. The developed extended Stöber method provides an efficient and versatile avenue toward the preparation of a series of well-defined SACs for diverse electrocatalytic systems.

Water-Trapping Single-Atom Co-N4 /Graphene Triggering Direct 4e- LiOH Chemistry for Rechargeable Aprotic Li-O2 Batteries

Lithium-oxygen (Li-O2 ) batteries have received extensive attention owing to ultrahigh theoretical energy density. Compared to typical discharge product Li2 O2 , LiOH has attracted much attention for its better chemical and electrochemical stability. Large-scale applications of Li-O2 batteries with LiOH chemistry are hampered by the serious internal shuttling of the water additives with the desired 4e- electrochemical reactions. Here, a metal organic framework-derived "water-trapping" single-atom-Co-N4 /graphene catalyst (Co-SA-rGO) is provided that successfully mitigates the water shuttling and enables the direct 4e- catalytic reaction of LiOH in the aprotic Li-O2 battery. The Co-N4 center is more active toward proton-coupled electron transfer, benefiting - direction 4e- formation of LiOH. 3D interlinked networks also provide large surface area and mesoporous structures to trap ≈12 wt% H2 O molecules and offer rapid tunnels for O2 diffusion and Li+ transportation. With these unique features, the Co-SA-rGO based Li-O2 battery delivers a high discharge platform of 2.83 V and a large discharge capacity of 12 760.8 mAh g-1 . Also, the battery can withstand corrosion in the air and maintain a stable discharge platform for 220 cycles. This work points out the direction of enhanced electron/proton transfer for the single-atom catalyst design in Li-O2 batteries.

Understanding the Bifunctional Trends of Fe-Based Binary Single-Atom Catalysts

Binary single-atom catalysts (BSACs) have demonstrated fascinating activities compared to single atom catalysts (SACs) for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). Notably, Fe SACs is one of the most promising ORR electrocatalysts, and further revealing the synergistic effects between Fe and other 3d transition metals (M) for FeM BSACs are very important to enhance bifunctional performance. Herein, density functional theory (DFT) calculations are first adapted to demonstrate the role of various transition metals on the bifunctional activity of Fe sites, and a notable volcano relationship is established through the generally accepted adsorption free energy that ΔG* OH for ORR, and ΔG* O -ΔG* OH for OER, respectively. Further, ten of the atomically dispersed FeM anchored on nitrogen-carbon support (FeM-NC) are successfully synthesized with typical atomic dispersion by a facile movable type printing method. The experimental data confirms the bifunctional activity diversity of FeM-NC between the early- and late- transition metals, agrees very well with the DFT results. More importantly, the optimal FeCu-NC shows the expected performance with high ORR and OER activity, thereby, the assembled rechargeable zinc-air battery delivers a high power density of 231 mW cm-2 , and an impressive stability that can be stably operated over 300 h.

Single atom iron implanted polydopamine-modified hollow leaf-like N-doped carbon catalyst for improving oxygen reduction reaction and zinc-air batteries

Metal-nitrogen-carbon (MNC) catalysts, especially FeNC catalysts, are considered promising candidates to replace Pt-based catalysts, but FeNC catalysts still present certain challenges in controlled-synthesis and energy device applications. In this paper, through the modification strategy of poly-dopamine (PDA) to maintain 2D leaf morphology to obtain more active sites and further adjust the N content, N-doped porous carbon monatomic iron catalyst (Fe_SA/NPCs) with rich-nitrogen content was prepared. XPS analysis showed that compared with C-ZIF-Fe, the contents of graphite nitrogen and pyridine nitrogen increased in Fe_SA/NPCs. The hollow structure with defects and Fe-N₄ configuration of Fe single atom show more active sites for the catalyst, and positively promote the diffusion of reactants, oxygen exchange and electron transport, thus changing the reaction kinetics and promoting the improvement of ORR activity. Fe_SA/NPCs electrocatalyst exhibits good half-wave potential and onset potential at low loading (E_1/2 = 0.93 V, E_onset = 1.0 V). In addition, the methanol tolerance, stability and Tafel slope are better than those of commercial Pt/C. Excitingly, the zinc-air cell with Fe_SA/NPCs as cathode material achieves a power density of 223 mW cm^-2 and exhibits a long-term stability higher than 200 h. This work shows that nitrogen-doped porous carbon materials as well as iron monoatoms play important roles in improving electrocatalytic performance.

Synergetic Nanostructure Engineering and Electronic Modulation of a 3D Hollow Heterostructured NiCo2O4@NiFe-LDH Self-Supporting Electrode for Rechargeable Zn-Air Batteries

Developing electrocatalysts that integrate the merits of the hollow structure and heterojunction is an attractive but still challenging strategy for addressing the sluggish kinetics of oxygen evolution reaction (OER) in many renewable energy technologies. Herein, a 3D hierarchically flexible self-supporting electrode with a hollow heterostructure is intentionally constructed by assembling thin NiFe layered double hydroxide (LDH) nanosheets on the surface of metal-organic framework-derived hollow NiCo₂O₄ nanoflake arrays (NiCo₂O₄@NiFe-LDH) for rechargeable Zn-air batteries (ZABs). Theoretical calculations demonstrate that the interfacial electron transfer from NiFe-LDH to NiCo₂O₄ induces the electronic modulation, improves the conductivity, and lowers the reaction energy barriers during OER, ensuring high catalytic activity. Meanwhile, the 3D hierarchically hollow nanoarray architecture can afford plentiful catalytic active sites and short mass-/charge-transfer pathways. As a result, the obtained catalyst exhibits remarkable OER electrocatalytic performance, showing low overpotentials (only 231 mV at 10 mA cm^-2, 300 mV at 50 mA cm^-2) and robust stability. When assembling liquid and flexible solid-state ZABs with NiCo₂O₄@NiFe-LDH as the OER catalyst, the ZABs achieve excellent power density, high specific capacity, superior cycle durability, and good bending flexibility, exceeding the RuO₂ + Pt/C benchmarks and other previously reported self-supporting catalysts. This work not only constructs an advanced hollow heterostructured catalyst for sustainable energy systems and wearable electronic devices but also provides insights into the role of interfacial electron modulation in catalytic performance enhancement.

Rational Design of Atomically Dispersed Metal Site Electrocatalysts for Oxygen Reduction Reaction

Future renewable energy supply and a cleaner Earth greatly depend on various crucial catalytic reactions for the society. Atomically dispersed metal site electrocatalysts (ADMSEs) have attracted tremendous research interest and are considered as the next-generation promising oxygen reduction reaction (ORR) electrocatalysts due to the maximum atom utilization efficiency, tailorable catalytic sites, and tunable electronic structures. Despite great efforts have been devoted to the development of ADMSEs, the systematic summary for design principles of high-efficiency ADMSEs is not sufficiently highlighted for ORR. In this review, the authors first summarize the fundamental ORR mechanisms for ADMSEs, and further discuss the intrinsic catalytic mechanism from the perspective of theoretical calculation. Then, the advanced characterization techniques to identify the active sites and effective synthesis methods to prepare catalysts for ADMSEs are also showcased. Subsequently, a special emphasis is placed on effective strategies for the rational design of the advanced ADMSEs. Finally, the present challenges to be addressed in practical application and future research directions are also proposed to overcome the relevant obstacles for developing high-efficiency ORR electrocatalysts. This review aims to provide a deeper understanding for catalytic mechanisms and valuable design principles to obtain the advanced ADMSEs for sustainable energy conversion and storage techniques.

Tunable Heterogeneous FeCo Alloy-Mo0.82N Bifunctional Electrocatalysts for Temperature-Adapted Zn-Air Batteries

The practical applications of temperature-tolerant Zn-air batteries (ZABs) rely on highly active and stable bifunctional catalysts that accelerate cathodic oxygen reduction (ORR) and oxygen evolution (OER) reactions. Herein, we successfully integrated fascinating transition metal nitrides and FeCo alloys through a simple coordination assembly and pyrolysis process. Importantly, the alloy-to-nitride ratio in the heterogeneous catalyst can be carefully regulated through the subsequent etching process. Moreover, the composition-dependent ORR/OER performance of the FeCo-Mo_0.82N catalysts was revealed. Aqueous ZABs using the optimized FeCo-Mo_0.82N-60 as a cathode exhibit a high peak power density of 149.7 mW cm^-2 and an impressive stability of 600 h with a low charge-discharge voltage gap decay rate of 0.025 mV h^-1, which exceeds those of most of recent reports. Furthermore, the FeCo-Mo_0.82N-60-based flexible ZABs display a small specific capacity degradation (3%) from 40 to -10 °C, demonstrating excellent temperature tolerance.

Dual Single-Atom Moieties Anchored on N-Doped Multilayer Graphene As a Catalytic Host for Lithium-Sulfur Batteries

Lithium-sulfur (Li-S) batteries are promising for energy storage, especially in the era of carbon neutrality. Nonetheless, the sluggish kinetics of converting soluble lithium polysulfides into solid lithium sulfide impedes its development. In this work, we design Fe and Co dual single-atom moieties anchored on N-doped multilayer graphene (FeCoNGr) as a catalytic sulfur cathode host for Li-S batteries. With an efficient catalytic role in converting soluble lithium polysulfides into solid Li2S, the FeCoNGr-based Li-S cell demonstrates a capacity of 878.7 mA h g-1 at 0.2 C and retains 77.4% of the initial value after 100 cycles. The first and retained capacities are ∼1.7 and ∼1.8 times those of the NGr (without single atoms)-based cell, respectively. Theoretical calculations reveal that the Fe-N4 moiety has a higher binding energy toward low-order lithium polysulfides, while the Co-N4 moiety has a higher binding energy toward high-order lithium polysulfides. The efficient catalytic conversion of soluble lithium polysulfides into solid lithium sulfides of FeCoNGr plays important roles in outperforming NGr. This work enhances our knowledge on the tandem role of dual single-atom moieties and confirmed the high catalytic efficiency of single-atom catalysts in Li-S batteries.

Heteroatom Coordination Regulates Iron Single-Atom-Catalyst with Superior Oxygen Reduction Reaction Performance for Aqueous Zn-Air Battery

Platinum group metal (PGM)-free M-N-C catalysts have exhibited dramatic electrocatalytic performance and are considered the most promising candidate of the Pt catalysts in oxygen reduction reaction (ORR). However, the electrocatalytic performance of the M-N-C catalysts is still limited by their inferior intrinsic activity and finite active site density. Regulating the coordination environment and increasing the pore structure of the catalyst is an effective strategy to enhance the electrocatalytic performance of the M-N-C catalysts. In this work, the coordination environment and pore structure exquisitely regulated Fe-N-C catalyst exhibit excellent ORR activity and durability. With the enhanced intrinsic activity and increased active site density, the optimized Fe-N/S-C catalyst shows impressive ORR activity (E_1/2  = 0.904 V vs reversible hydrogen electrode (RHE)) and superior long-term durability in an alkaline medium. As the advanced physical characterization and theoretical chemistry methods illustrate, the S-modified Fe-N_x (Fe-N₃ /S-C) moiety is confirmed as the improved active center for ORR, and the increased active site density further improved ORR efficiency. Based on the Fe-N/S-C cathode, a Zn-air battery is fabricated and shows superior power density (315.4 mW cm^-2 ) and long-term discharge stability at 20 mA cm^-2 . This work would open a new perspective to design atomically dispersed iron-metal site catalysts for advanced electro-catalysis.

Ultrahigh-Loaded Fe Single Atoms and Fe3C Nanoparticle Catalysts as Air Cathodes for High-Performance Zn-Air Batteries

Fe-based materials containing Fe-Nx sites have emerged as promising electrocatalysts in the oxygen reduction reaction (ORR), but they still suffer structural instability which may lead to loss of catalytic activity. Herein, a novel electrocatalyst Fe₃C-FeSA@3DCN with the coexistence of Fe₃C nanoparticles and Fe single atoms (FeSA) in a three-dimensional conductive network (3DCN) is prepared via lattice confinement and defect trapping strategies with an Fe atomic loading of as high as 4.36%. In the ORR process, the limiting current density of Fe₃C-FeSA@3DCN reaches 5.72 mA cm^-2, with an onset potential of 0.926 V and a Tafel slope of 66 mV/decade, showing better catalytic activity and stability than Pt/C catalysts. Notably, its assembled aqueous and solid-state Zn-air batteries (ZABs) achieve peak power densities of 166 and 56 mW cm^-2, respectively, with a long service life of up to 200 h at a current density of 5 mA cm^-2. In addition, the assembled ZAB can provide a constant voltage on activated carbon electrodes to perform capacitive deionization to adsorb different ions. The importance of the Fe species active sites generated by Fe₃C and FeSA in the material for ORR activity to boost the electron transfer and mass transfer is demonstrated by a simple selective poisoning experiment.

Computational Study on the Catalytic Performance of Single-Atom Catalysts Anchored on g-CN for Electrochemical Oxidation of Formic Acid

The electrochemical formic acid oxidation reaction (FAOR) has attracted great attention due to its high volumetric energy density and high theoretical efficiency for future portable electronic applications, for which the development of highly efficient and low-cost electrocatalysts is of great significance. In this work, taking single-atom catalysts (SACs) supported on graphitic carbon nitrides (g-CN) as potential catalysts, their catalytic performance for the FAOR was systemically explored by means of density functional theory computations. Our results revealed that the strong hybridization with the unpaired lone electrons of N atoms in the g-CN substrate ensured the high stability of these anchored SACs and endowed them with excellent electrical conductivity. Based on the computed free energy changes of all possible elementary steps, we predicted that a highly efficient FAOR could be achieved on Ru/g-CN with a low limiting potential of −0.15 V along a direct pathway of HCOOH(aq) → HCOOH* → HCOO* → CO2* → CO2(g), in which the formation of HCOO* was identified as the potential-determining step, while the rate-determining step was located at the CO2* formation, with a moderate kinetic barrier of 0.89 eV. Remarkably, the moderate d-band center and polarized charge of the Ru active site caused the Ru/g-CN catalyst to exhibit an optimal binding strength with various reaction intermediates, explaining well its superior FAOR catalytic performance. Hence, the single Ru atom anchored on g-CN could be utilized as a promising SAC for the FAOR, which opens a new avenue to further develop novel catalysts for a sustainable FAOR in formic-acid-based fuel cells.

Copper Collector Generated Cu+/Cu2+ Redox Pair for Enhanced Efficiency and Lifetime of Zn-Ni/Air Hybrid Battery

Although Zn-Ni/air hybrid batteries exhibit improved energy efficiency, power density, and stability compared with Zn-air batteries, they still cannot satisfy the high requirements of commercialization. Herein, the Cu⁺/Cu²⁺ redox pair generated from a copper collector has been introduced to construct the hybrid battery system by combining Zn-air and Zn-Cu/Zn-Ni, in which Cu_XO@NiFe-LDH and Co-N-C dodecahedrons are respectively adopted as oxygen evolution (OER) and oxygen reduction (ORR) electrodes. For fabricating Cu_XO@NiFe-LDH, the Cu foam collector is oxidized to in situ form 1D Cu_XO nanoneedle arrays, which could generate the Cu⁺/Cu²⁺ redox pair to enhance battery efficiency by providing an extra charging-discharging voltage plateau to reduce the charging voltage and increase the discharge voltage. Then, the 2D NiFe hydrotalcite nanosheets grow on the nanoneedle arrays to obtain 3D interdigital structures, facilitating the intimate contact of the ORR/OER electrode and electrolyte by providing a multichannel structure. Thus, the battery system could endow a high energy efficiency (79.6% at 10 mA cm^-2), an outstanding energy density (940 Wh kg^-1), and an ultralong lifetime (500 h). Significantly, it could stably operate under harsh environments, such as oxygen-free and any humidity. In situ X-ray diffraction (XRD) combined with ex situ X-ray photoelectron spectroscopy (XPS) analyses demonstrate the reversible process of Cu-O-Cu ↔ Cu-O and Ni-O ↔ Ni-O-O-H during the charging/discharging, which are responsible for the enhanced efficiency and lifetime of battery.

Rationalizing Structural Hierarchy in the Design of Fuel Cell Electrode and Electrolyte Materials Derived from Metal-Organic Frameworks

Metal-organic frameworks (MOFs) are arguably a class of highly tuneable polymer-based materials with wide applicability. The arrangement of chemical components and the bonds they form through specific chemical bond associations are critical determining factors in their functionality. In particular, crystalline porous materials continue to inspire their development and advancement towards sustainable and renewable materials for clean energy conversion and storage. An important area of development is the application of MOFs in proton-exchange membrane fuel cells (PEMFCs) and are attractive for efficient low-temperature energy conversion. The practical implementation of fuel cells, however, is faced by performance challenges. To address some of the technical issues, a more critical consideration of key problems is now driving a conceptualised approach to advance the application of PEMFCs. Central to this idea is the emerging field MOF-based systems, which are currently being adopted and proving to be a more efficient and durable means of creating electrodes and electrolytes for proton−exchange membrane fuel cells. This review proposes to discuss some of the key advancements in the modification of PEMs and electrodes, which primarily use functionally important MOFs. Further, we propose to correlate MOF-based PEMFC design and the deeper correlation with performance by comparing proton conductivities and catalytic activities for selected works.