Colorful Luminescent Magnetic Supraparticles: Expanding the Applicability, Information Capacity, and Security of Micrometer-Scaled Identification Taggants by Dual-Spectral Encoding

Building respirable powder architectures: utilizing polysaccharides for precise control of particle morphology for enhanced pulmonary drug delivery

INTRODUCTION

Dry powder inhaler (DPI) formulations are gaining attention as universal formulations with applications in a diverse range of drug formulations. The practical application of DPIs to pulmonary drugs requires enhancing their delivery efficiency to the target sites for various treatment modalities. Previous reviews have not explored the relation between particle morphology and delivery to different pulmonary regions. This review introduces new approaches to improve targeted DPI delivery using novel particle design such as supraparticles and metal-organic frameworks based on cyclodextrin.

AREAS COVERED

This review focuses on the design of DPI formulations using polysaccharides, promising excipients not yet approved by regulatory agencies. These excipients can be used to design various particle morphologies by controlling their physicochemical properties and manufacturing methods.

EXPERT OPINION

Challenges associated with DPI formulations include poor access to the lungs and low delivery efficiency to target sites in the lung. The restricted applicability of typical excipients contributes to their limited use. However, new formulations based on polysaccharides are expected to establish a technological foundation for the development of DPIs capable of delivering modalities specific to different lung target sites, thereby enhancing drug delivery.

Catalyst Supraparticles: Tuning the Structure of Spray-Dried Pt/SiO2 Supraparticles via Salt-Based Colloidal Manipulation to Control their Catalytic Performance

The structure of supraparticles (SPs) is a key parameter for achieving advanced functionalities arising from the combination of different nanoparticle (NP) types in one hierarchical entity. However, whenever a droplet-assisted forced assembly approach is used, e.g., spray-drying, the achievable structure is limited by the inherent drying phenomena of the method. In particular, mixed NP dispersions of differently sized colloids are heavily affected by segregation during the assembly. Herein, the influence of the colloidal arrangement of Pt and SiO2 NPs within a single supraparticulate entity is investigated. A salt-based electrostatic manipulation approach of the utilized NPs is proposed to customize the structure of spray-dried Pt/SiO2 SPs. By this, size-dependent separation phenomena of NPs during solvent evaporation, that limit the catalytic performance in the reduction of 4-nitrophenol, are overcome by achieving even Pt NP distribution. Additionally, the textural properties (pore size and distribution) of the SiO2 pore framework are altered to improve the mass transfer within the material leading to increased catalytic activity. The suggested strategy demonstrates a powerful, material-independent, and universally applicable approach to deliberately customize the structure and functionality of multi-component SP systems. This opens up new ways of colloidal material combinations and structural designs in droplet-assisted forced assembly approaches like spray-drying.

Influence of cation concentration and valence on the structure and texture of spray-dried supraparticles from colloidal silica dispersions

The structure and texture of supraparticles determine their properties and performance, thus playing a critical role in research studies as well as industrial applications. The addition of salts is a well-known strategy to manipulate the colloidal stability of nanoparticles. In this study, this approach is used to tune the structure of spray-dried supraparticles. Three different salts (NaCl, CaCl2, and AlCl3) were added to binary silica (SiO2) nanoparticle dispersions (of 40 and 400 nm in size) to change their colloidal stability by lowering the electrostatic repulsion or enhancing the cation bridging. Dependent on the cation valence of the added salt and the nanoparticle size, the critical salt concentration, which yields nanoparticle agglomeration, is reached at different salt amounts. This phenomenon is exploited to tune the final structure of supraparticles - obtained by spray-drying binary dispersions - from core-shell to Janus-like to well-mixed structures. This consequently also tunes textural properties, like surface roughness and the pore system of the obtained supraparticles. Our results provide insights for controlling the structure of spray-dried supraparticles by manipulating the stability of binary nanoparticle dispersions, and they establish a framework for composite particle design.

Multiple-Channel Information Encryption Based on Quantum Dot Absorption Spectra

Large-capacity information encryption has attracted significant interest in the information age. The diversity and controllability of spectra have positioned them to be widely applied for information encryption. Current spectra-based information encryption methods commonly rely on either spectral alteration induced by external stimuli or the utilization of narrowband channels within spectra. However, these methods encounter a common challenge in attaining both high security and large capacity simultaneously. To address these issues, we propose a multiple-channel information encryption system based on quantum dot (QD) absorption spectra. The diversity of QD absorption spectra and their broadband features ensure that the encrypted spectra can hardly be decrypted without knowing the correct channel matrix. Meanwhile, the large capacity is realized through the combination of multiple QD spectral channels with a theoretical maximum capacity of 24.0 bits in a single spectrum. In order to optimize the performance of our proposed system, the selection principle of the channel matrix is established to achieve the rapid identification of the optimal channel matrix in several milliseconds. The additivity of QD spectral channels and the consistency of QD spectra are also explored to minimize the impact of errors on information decryption. Furthermore, two spectral encryption scenarios of spatial pattern and spectral pattern are applied to demonstrate the feasibility, showcasing their ability to achieve both a high level of security and large capacity. Owing to the advantages offered by QD spectra, the QD spectra-based information system exhibits excellent potential for broader applications in information storage, authentication, and computing.

Multifunctional, Hybrid Materials Design via Spray-Drying: Much more than Just Drying

Spray-drying is a popular and well-known "drying tool" for engineers. This perspective highlights that, beyond this application, spray-drying is a very interesting and powerful tool for materials chemists to enable the design of multifunctional and hybrid materials. Upon spray-drying, the confined space of a liquid droplet is narrowed down, and its ingredients are forced together upon "falling dry." As  detailed in this article, this enables the following material formation strategies either individually or even in combination: nanoparticles and/or molecules can be assembled; precipitation reactions as well as chemical syntheses can be performed; and templated materials can be designed. Beyond this, fragile moieties can be processed, or "precursor materials" be prepared. Post-treatment of spray-dried objects eventually enables the next level in the design of complex materials. Using spray-drying to design (particulate) materials comes with many advantages-but also with many challenges-all of which are outlined here. It is believed that multifunctional, hybrid materials, made via spray-drying, enable very unique property combinations that are particularly highly promising in myriad applications-of which catalysis, diagnostics, purification, storage, and information are highlighted.

Communicating Supraparticles to Enable Perceptual, Information-Providing Matter

Materials are the fundament of the physical world, whereas information and its exchange are the centerpieces of the digital world. Their fruitful synergy offers countless opportunities for realizing desired digital transformation processes in the physical world of materials. Yet, to date, a perfect connection between these worlds is missing. From the perspective, this can be achieved by overcoming the paradigm of considering materials as passive objects and turning them into perceptual, information-providing matter. This matter is capable of communicating associated digitally stored information, for example, its origin, fate, and material type as well as its intactness on demand. Herein, the concept of realizing perceptual, information-providing matter by integrating customizable (sub-)micrometer-sized communicating supraparticles (CSPs) is presented. They are assembled from individual nanoparticulate and/or (macro)molecular building blocks with spectrally differentiable signals that are either robust or stimuli-susceptible. Their combination yields functional signal characteristics that provide an identification signature and one or multiple stimuli-recorder features. This enables CSPs to communicate associated digital information on the tagged material and its encountered stimuli histories upon signal readout anywhere across its life cycle. Ultimately, CSPs link the materials and digital worlds with numerous use cases thereof, in particular fostering the transition into an age of sustainability.

Versatile Mesoporous Microblocks Prepared by Pattern-Induced Cracking of Colloidal Films

Mesoporous microparticles have the potential to be used in various fields, such as energy generation, sensing, and the environmental field. Recently, the process of making homogeneous microparticles in an economical and environmentally friendly way has gained much attention. Herein, rectangular mesoporous microblocks of various designs are produced by manipulating the fragmentation of colloidal films consisting of micropyramids while controlling the notch angles of pyramidal edges. During calcination of the colloidal films, cracks are generated in the valleys of micropyramids acting as notches, and the angle of notches can be controlled by the prepattern underneath the micropyramids. By changing the location of notches with sharp angles, the shape of microblocks can be controlled with excellent uniformity. After detaching the microblocks from substrates, mesoporous microparticles of various sizes with multiple functions are easily produced. This study demonstrates anti-counterfeiting functions by encoding the rotation angles of rectangular microblocks of various sizes. In addition, the mesoporous microparticles can be utilized for separating desired chemicals mixed with chemicals of different charges. The method of fabricating size-tunable functionalized mesoporous microblocks can be a platform technology to prepare special films and catalysts and for environmental applications.

Electrospinning Preparation, Structure, and Properties of Fe3O4/Tb(acac)3phen/Polystyrene Bifunctional Microfibers

Compared to single functional materials, multifunctional materials with magnetism and luminescence are more attractive and promising; Thus, it has become an important subject. In our work, bifunctional Fe₃O₄/Tb(acac)₃phen/polystyrene) microfibers with magnetic and luminescent properties (acac: acetylacetone, phen: 1,10-phenanthroline) were synthesized by simple electrospinning process. The doping of Fe₃O₄ and Tb(acac)₃phen made the fiber diameter larger. The surface of pure polystyrene microfibers and microfibers doped only with Fe₃O₄ nanoparticles were chapped similar to bark, whereas the surface of the microfibers was smoother after doping with Tb(acac)₃phen complexes. The luminescent properties of the composite microfibers were systematically studied in contrast to pure Tb(acac)₃phen complexes, including excitation and emission spectra, fluorescence dynamics, and the temperature dependence of intensity. Compared with the pure complexes, the thermal activation energy and thermal stability of composite microfiber was significantly improved, and the luminescence of the unit mass of Tb(acac)₃phen complexes in composite microfibers was stronger than that in pure Tb(acac)₃phen complexes. The magnetic properties of the composite microfibers were also investigated using hysteresis loops, and an interesting experimental phenomenon was found that the saturation magnetization of the composite microfibers gradually increased with the increase in the doping proportion of terbium complexes.

Magnetic in situ determination of surface coordination motifs by utilizing the degree of particle agglomeration

Most analytical techniques used to study the surface chemical properties of superparamagnetic iron oxide nanoparticles (SPIONs) are barely suitable for in situ investigations in liquids, where SPIONs are mostly applied for hyperthermia therapy, diagnostic biosensing, magnetic particle imaging or water purification. Magnetic particle spectroscopy (MPS) can resolve changes in magnetic interactions of SPIONs within seconds at ambient conditions. Herein, we show that by adding mono- and divalent cations to citric acid capped SPIONs, the degree of agglomeration can be utilized to study the selectivity of cations towards surface coordination motifs via MPS. A favored chelate agent, like ethylenediaminetetraacetic acid (EDTA) for divalent cations, removes cations from coordination sites on the SPION surface and causes redispersion of agglomerates. The magnetic determination thereof represents what we call a "magnetically indicated complexometric titration". The relevance of agglomerate sizes for the MPS signal response is studied on a model system of SPIONs and the surfactant cetrimonium bromide (CTAB). Analytical ultracentrifugation (AUC) and cryogenic transmission electron microscopy (cryo-TEM) reveal that large micron-sized agglomerates are required to significantly change the MPS signal response. With this work, a fast and easy-to-use characterization method to determine surface coordination motifs of magnetic nanoparticles in optically dense media is demonstrated.

Supraparticles for naked-eye H2 indication and monitoring: Improving performance by variation of the catalyst nanoparticles

The recent transition to H₂-based energy storage demands reliable H₂ sensors that allow for easy, fast, and reliable detection of leaks. Conventional H₂ detectors are based on the changes of physical properties of H₂ probes induced by subsurface H-atoms to a material such as electrical conductivity. Herein, we report on highly reactive gasochromic H₂ detectors based on the adsorption of H₂ on the material surface. We prepared supraparticles (SPs) containing different types of noble metal nanoparticles (NPs), silica NPs, and the dye resazurin by spray-drying and tested their performance for H₂ detection. The material undergoes a distinct color change due to the hydrogenation of the purple resazurin to pink resorufin and, finally, colorless hydroresorufin. The stepwise transition is fast and visible to the naked eye. To further improve the performance of the sensor, we tested the reactivity of SPs with different catalytically active NPs by means of in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS). We show that the choice of the NP catalyst has a pronounced effect on the response of the H₂ indicator. In addition, we demonstrate that the performance depends on the size of the NPs. These effects are attributed to the availability of reactive H-atoms on the NP surface. Among the materials studied, Pt-containing SPs gave the best results for H₂ detection.

Enabling the Polymer Circular Economy: Innovations in Photoluminescent Labeling of Plastic Waste for Enhanced Sorting

It is widely accepted that moving from a linear to circular economy for plastics will be beneficial to reduce plastic pollution in our environment and to prevent loss of material value. However, challenges within the sorting of plastic waste often lead to contaminated waste streams that can devalue recyclates and hinder reprocessing. Therefore, the improvement of the sorting of plastic waste can lead to dramatic improvements in recyclate quality and enable circularity for plastics. Here, we discuss current sorting methods for plastic waste and review labeling techniques to enable enhanced sorting of plastic recyclates. Photoluminescent-based labeling is discussed in detail, including UV-vis organic and inorganic photoluminescent markers, infrared up-conversion, and X-ray fluorescent markers. Methods of incorporating labels within packaging, such as extrusion, surface coatings, and incorporation within external labels are also discussed. Additionally, we highlight some practical models for implementing some of the sorting techniques and provide an outlook for this growing field of research.

Recording Temperature with Magnetic Supraparticles

Small-sized temperature indicator additives autonomously record temperature events via a gradual irreversible signal change. This permits, for instance, the indication of possible cold-chain breaches or failure of electronics but also curing of glues. Thus, information about the materials' thermal history can be obtained upon signal detection at every point of interest. In this work, maximum-temperature indicators with magnetic readout based on micrometer-sized supraparticles (SPs) are introduced. The magnetic signal transduction is, by nature, independent of the materials' optical properties. This facilitates the determination of valuable temperature information from the inside, that is, the bulk, even of dark and opaque macroscopic objects, which might differ from their surface. Compared to state-of-the-art optical temperature indicators, complementary magnetic readout characteristics ultimately expand their applicability. The conceptualized SPs are hierarchically structured assemblies of environmentally friendly, inexpensive iron oxide nanoparticles and thermoplastic polymer. Irreversible structural changes, induced by polymer softening, yield magnetic interaction changes within and between the hierarchic sub-structures, which are distinguishable and define the temperature indication mechanism. The fundamental understanding of the SPs' working principle enables customization of the particles' working range, response time, and sensitivity, using a toolbox-like manufacturing approach. The magnetic signal change is detected self-referenced, fast, and contactless.

Optically Sensitive and Magnetically Identifiable Supraparticles as Indicators of Surface Abrasion

Identifying and ensuring the integrity of products plays an important role in today's globalized world. Miniaturized information taggants in the packaging surface are therefore required to monitor the product itself instead of applying external labels. Ideally, multiple types of information are stored in such additives. In this work, micrometer-sized core-shell particles (supraparticles) were developed to provide material surfaces with both an identifier and a surface abrasion indication functionality. The core of the supraparticles contains iron oxide nanoparticles that allow identification of the surface with a spectral magnetic code resolved by magnetic particle spectroscopy. The fluorescent silica nanoparticles in the supraparticle shell can be abraded by mechanical stress and resolved by fluorescence spectroscopy. This provides information about the mechanical integrity of the system. The application as surfaces, that contain several types of information in one supraparticle, was demonstrated here by incorporating such bifunctional supraparticles as additives in a surface coating.