Molecular-Level Zn-Ion Transfer Pump Specifically Functioning on (002) Facets Enables Durable Zn Anodes

3D Leaf-Like Copper-Zinc Alloy Enables Dendrite-Free Zinc Anode for Ultra-Long Life Aqueous Zinc Batteries

Metallic zinc exhibits immense potential as an anode material for aqueous rechargeable zinc batteries due to its high theoretical capacity, low redox potential, and inherent safety. However, practical applications are hindered by dendrite formation and poor cycling stability. Herein, a facile substitution reaction method is presented to fabricate a 3D leaf-like Cu@Zn composite anode. This unique architecture, featuring a 3D network of leaf-like Cu on a Zn foil surface, significantly reduces nucleation overpotential and facilitates uniform Zn plating/stripping, effectively suppressing dendrite growth. Notably, an alloy layer of CuZn5 forms in situ on the 3D Cu layer during cycling. DFT calculations reveal that this CuZn5 alloy possesses a lower Zn binding energy compared to both Cu and Zn metal, further promoting Zn plating/stripping and enhancing electrochemical kinetics. Consequently, the symmetric Cu@Zn electrode exhibits remarkable cycling stability, surpassing 1300 h at 0.5 mA cm-2 with negligible dendrite formation. Furthermore, full cells comprising Cu@Zn||VO2 exhibit superior capacity and rate performance compared to bare Zn anodes. This work provides a promising strategy for constructing highly stable and efficient Zn anodes for next-generation aqueous zinc batteries.

Phytic Acid Customized Hydrogel Polymer Electrolyte and Prussian Blue Analogue Cathode Material for Rechargeable Zinc Metal Hydrogel Batteries

Zinc anode deterioration in aqueous electrolytes, and Zn dendrite growth is a major concern in the operation of aqueous rechargeable Zn metal batteries (AZMBs). To tackle this, the replacement of aqueous electrolytes with a zinc hydrogel polymer electrolyte (ZHPE) is presented in this study. This method involves structural modifications of the ZHPE by phytic acid through an ultraviolet (UV) light-induced photopolymerization process. The high membrane flexibility, high ionic conductivity (0.085 S cm-1), improved zinc corrosion overpotential, and enhanced electrochemical stability value of ≈2.3 V versus Zn|Zn2+ show the great potential of ZHPE as an ideal gel electrolyte for rechargeable zinc metal hydrogel batteries (ZMHBs). This is the first time that the dominating effect of chelation of phytic acid with M2+ center over H-bonding with water is described to tune the gel electrolyte properties for battery applications. The ZHPE shows ultra-high stability over 360 h with a capacity of 0.50 mAh cm-2 with dendrite-free plating/stripping in Zn||Zn symmetric cell. The fabrication of the ZMHB with a high-voltage zinc hexacyanoferrate (ZHF) cathode shows a high-average voltage of ≈1.6 V and a comparable capacity output of 63 mAh g-1 at 0.10 A g-1 of the current rate validating the potential application of ZHPE.

Recent advances in zinc-ion dehydration strategies for optimized Zn-metal batteries

Aqueous Zn-metal batteries have attracted increasing interest for large-scale energy storage owing to their outstanding merits in terms of safety, cost and production. However, they constantly suffer from inadequate energy density and poor cycling stability due to the presence of zinc ions in the fully hydrated solvation state. Thus, designing the dehydrated solvation structure of zinc ions can effectively address the current drawbacks of aqueous Zn-metal batteries. In this case, considering the lack of studies focused on strategies for the dehydration of zinc ions, herein, we present a systematic and comprehensive review to deepen the understanding of zinc-ion solvation regulation. Two fundamental design principles of component regulation and pre-desolvation are summarized in terms of solvation environment formation and interfacial desolvation behavior. Subsequently, specific strategy based distinct principles are carefully discussed, including preparation methods, working mechanisms, analysis approaches and performance improvements. Finally, we present a general summary of the issues addressed using zinc-ion dehydration strategies, and four critical aspects to promote zinc-ion solvation regulation are presented as an outlook, involving updating (de)solvation theories, revealing interfacial evolution, enhancing analysis techniques and developing functional materials. We believe that this review will not only stimulate more creativity in optimizing aqueous electrolytes but also provide valuable insights into designing other battery systems.

Pre-Intercalation of TMA Cations in MoS2 Interlayers for Fast and Stable Zinc Ion Storage

Applications of aqueous zinc ion batteries (ZIBs) for grid-scale energy storage are hindered by the lacking of stable cathodes with large capacity and fast redox kinetics. Herein, the intercalation of tetramethylammonium (TMA+) cations is reported into MoS2 interlayers to expand its spacing from 0.63 to 1.06 nm. The pre-intercalation of TMA+ induces phase transition of MoS2 from 2H to 1T phase, contributing to an enhanced conductivity and better wettability. Besides, The calculation from density functional theory indicates that those TMA+ can effectively shield the interactions between Zn2+ and MoS2 layers. Consequently, two orders magnitude high Zn2+ ions diffusion coefficient and 11 times enhancement in specific capacity (212.4 vs 18.9 mAh g‒1 at 0.1 A g‒1) are achieved. The electrochemical investigations reveal both Zn2+ and H+ can be reversibly co-inserted into the MoS2-TMA electrode. Moreover, the steady habitat of TMA+ between MoS2 interlayers affords the MoS2-TMA with remarkable cycling stability (90.1% capacity retention after 2000 cycles at 5.0 A g‒1). These performances are superior to most of the recent zinc ion batteries assembled with MoS2 or VS2-based cathodes. This work offers a new avenue to tuning the structure of MoS2 for aqueous ZIBs.

An Ionic Liquid Supramolecular Gel Electrolyte with Unique Wide Operating Temperature Range Properties for Zinc-Ion Batteries

Zinc-ion batteries are promising candidates for large-scale energy storage. The side reactions of the hydrogen evolution reaction (HER) and zinc dendrite growth are major challenges for developing high-performance zinc-ion batteries. In this paper, a supramolecular gel electrolyte (BLO-ILZE) was self-assembled in an ionic liquid (EMIMBF4) with zinc tetrafluoroborate (Zn(BF4)2) on the separator in situ to obtain a gel electrolyte used in zinc-ion batteries. BLO-ILZE is demonstrated to significantly enhance conductivity over a broad temperature range between -70 and 100 °C. Interestingly, through testing and fitting, it is found that the supramolecular gel electrolyte satisfies the liquid state law over a wide temperature range, and even achieves high conductivity (2.12 mS cm-1) at -40 °C. It is equivalent to the conductivity of aqueous zinc-ion batteries (ZnSO4/H2O) at -10 °C, which is 2.33 mS cm-1. Moreover, the supramolecular gel electrolyte can effectively inhibit the HER, thus exhibiting a longer lifetime in Zn/Zn cells for 3470 h at 1 mA cm-2 compared to the aqueous zinc-ion batteries with the Zn(BF4)2 aqueous electrolyte (400 h at 1 mA cm-2). The assembled V2O5/BLO-ILZE/Zn full cells also showed cycling performance, with 5000 cycles at 0.5 mA g-1 at room temperature, a capacity of 98%, and a coulombic efficiency of about 100%.

Positively Charged Amino Acid-Modulated Interfacial Chemistry and Deposition Textures for Highly Reversible Zinc Anodes

Interfacial active water molecule-induced parasitic reactions and stochastic Zn2+ transport-caused dendrite issue significantly impede the implementation of aqueous Zn-ion batteries. Herein, three positively charged amino acids, namely arginine, histidine, and lysine, were utilized as adsorption-type electrolyte additives to enhance the stability and reversibility of Zn anodes. Combined theoretical and experimental analyses verified that these amino acid cations can synergistically modulate the interfacial microenvironment and promote orientational Zn deposition. The adsorbed amino acid cations reconfigured the interfacial electric double layer structure, forming SO42-- and H2O-poor interfaces, thereby retarding hydrogen evolution and corrosion side reactions. Simultaneously, the preferential adsorption of the amino acid cations at specific facets induced crystallographic orientational Zn deposition along unterminated facets. Three deposition architectures, namely planar texture, subvertical alignment, and vertical erection, were obtained, all effectively inhibiting dendrite formation. Consequently, symmetric cells with the three amino acid cations exhibited high stripping/plating reversibility of over 2000 cycles at 5 mA cm-2. Moreover, MnO2-based full cells exhibited markedly improved stabilities compared with their additive-free counterparts.

Defect-Rich Functional HfO2-x for Highly Reversible Zn Metal Anode

Interface engineering attracted tremendous attention owing to its remarkable ability to impede dendrite growth and side reactions in aqueous zinc-ion batteries. Artificial interface layers composed of crystalline materials have been extensively employed to stabilize the Zn anode. However, the diffusion kinetics of Zn2+ in highly crystalline materials are hindered by steric effects from the lattice, thereby limiting the high-rate performance of the cell. Here, defect-rich HfO2-x polycrystals derived from metal-organic frameworks (MOFs) (D-HfO2-x) are developed to enhance the Zn deposition behavior. The discrepancy of dielectric constants between metallic Zn and HfO2 enables the building of an electrostatic shielding layer for uniform Zn deposition. More importantly, the oxygen vacancies in D-HfO2-x provide abundant active sites for Zn2+ adsorption, accelerating the kinetics of Zn2+ migration, which contributes to the preferential exposure of the Zn (002) plane during plating. Consequently, the D-HfO2-x-modified Zn anode delivers ultrastable durability of over 5000 h at 1 mA cm-2 and a low voltage hysteresis of 30 mV. The constructed defective coating provides a guarantee for the stable operation of Zn anodes, and the innovative approach of defective engineering also offers new ideas for the protection of other energy storage devices.

Unveiling the Potential of the Alkyl Chain of Isoleucine for Regulating the Electrical Double Layer and Enhancing the Zinc-Ion Battery Performance

Amino acids are considered effective additives for regulating the electric double layer (EDL) in zinc-ion battery (ZIB) electrolytes. In comparison to their polar counterparts, nonpolar amino acids have received less attention in research. We demonstrated that isoleucine (ILE), benefiting from its nonpolar alkyl chain, emerges as a highly suitable electrolyte additive for aqueous ZIBs. ILE molecules preferentially adsorb onto the anode surface of zinc metal, subsequently creating a locally hydrophobic EDL facilitated by the alkyl chain. On one hand, this enhances the thermodynamic stability at the anode, while on the other hand, it accelerates the desolvation process of zinc ions, thereby improving the kinetics. Benefiting from the unique properties of ILE molecules, Cu//Zn cells with the ILE additive ultimately achieved an extended cycle life of 2600 cycles with an average coulombic efficiency of 99.695%, significantly outperforming other amino acid additives reported in the literature.

Fundamental Understanding of Hydrogen Evolution Reaction on Zinc Anode Surface: A First-Principles Study

Hydrogen evolution reaction (HER) has become a key factor affecting the cycling stability of aqueous Zn-ion batteries, while the corresponding fundamental issues involving HER are still unclear. Herein, the reaction mechanisms of HER on various crystalline surfaces have been investigated by first-principle calculations based on density functional theory. It is found that the Volmer step is the rate-limiting step of HER on the Zn (002) and (100) surfaces, while, the reaction rates of HER on the Zn (101), (102) and (103) surfaces are determined by the Tafel step. Moreover, the correlation between HER activity and the generalized coordination number ([Formula: see text]) of Zn at the surfaces has been revealed. The relatively weaker HER activity on Zn (002) surface can be attributed to the higher [Formula: see text] of surface Zn atom. The atomically uneven Zn (002) surface shows significantly higher HER activity than the flat Zn (002) surface as the [Formula: see text] of the surface Zn atom is lowered. The [Formula: see text] of surface Zn atom is proposed as a key descriptor of HER activity. Tuning the [Formula: see text] of surface Zn atom would be a vital strategy to inhibit HER on the Zn anode surface based on the presented theoretical studies. Furthermore, this work provides a theoretical basis for the in-depth understanding of HER on the Zn surface.

Electrolyte Additives for Stable Zn Anodes

Zn-ion batteries are regarded as the most promising batteries for next-generation, large-scale energy storage because of their low cost, high safety, and eco-friendly nature. The use of aqueous electrolytes results in poor reversibility and leads to many challenges related to the Zn anode. Electrolyte additives can effectively address many such challenges, including dendrite growth and corrosion. This review provides a comprehensive introduction to the major challenges in and current strategies used for Zn anode protection. In particular, an in-depth and fundamental understanding is provided of the various functions of electrolyte additives, including electrostatic shielding, adsorption, in situ solid electrolyte interphase formation, enhancing water stability, and surface texture regulation. Potential future research directions for electrolyte additives used in aqueous Zn-ion batteries are also discussed.

Atomic Zincophilic Sites Regulating Microspace Electric Fields for Dendrite-Free Zinc Anode

Aqueous Zn metal batteries are promising candidates for large-scale energy storage due to their intrinsic advantages. However, Zn tends to deposit irregularly and forms dendrites driven by the uneven space electric field distribution near the Zn-electrolyte interphase. Herein it is demonstrated that trace addition of Co single atom anchored carbon (denoted as CoSA/C) in the electrolyte regulates the microspace electric field at the Zn-electrolyte interphase and unifies Zn deposition. Through preferential adsorption of CoSA/C on the Zn surface, the atomically dispersed Co-N3 with strong charge polarization effect can redistribute the local space electric field and regulate ion flux. Moreover, the dynamic adsorption/desorption of CoSA/C upon plating/stripping offers sustainable long-term regulation. Therefore, Zn||Zn symmetric cells with CoSA/C electrolyte additive deliver stable cycling up to 1600 h (corresponding to a cumulative plated capacity of 8 Ah cm-2 ) at a high current density of 10 mA cm-2 , demonstrating the sustainable feature of microspace electric field regulation at high current density and capacity.

In Situ Etching of Multifunctional Three-Dimensional Interfacial Layers for the Construction of Porous Zn Anodes with Enhanced Surface Textures

Aqueous Zn-ion batteries offer the advantages of greater security and lower fabrication costs over their lithium-ion counterparts. However, their further advancement and practical application are hindered by the drastic decay in their performance due to the uncontrollable dendrite growth on Zn anodes. In this study, we fabricated a versatile three-dimensional (3D) interfacial layer (3D PVDF-Zn(TFO)2 (PVDF: poly(vinylidene fluoride); TFO: trifluoromethanesulfonate), which simultaneously formed porous Zn-metal anodes (PZn) with an enhanced (002) texture, via a in situ etching scheme. The 3D PVDF-Zn(TFO)2@PZn symmetrical cells leverage the advantages of surface coating and 3D porous architectures to yield extra-long cyclic lifetimes of over 5300 h (0.1 mA cm-2). The fabricated anodes were found to be compatible with MnO2 cathodes, and the resulting full batteries delivered an outstanding capacity of 336 mAh g-1 at 0.1 A g-1 and exhibited impressive long-term reversibility with a capacity retention of 78.7% for 2000 cycles. The proposed coating strategy is viable for developing porous structures with cutting-edge designs and for textured surface engineering.

Adaptive Ionization-Induced Tunable Electric Double Layer for Practical Zn Metal Batteries over Wide pH and Temperature Ranges

The violent side reactions of Zn metal in aqueous electrolyte lead to sharp local-pH fluctuations at the interface, which accelerate Zn anode breakdown; thus, the development of an optimization strategy to accommodate a wide pH range is particularly critical for improving aqueous Zn metal batteries. Herein, we report a pH-adaptive electric double layer (EDL) tuned by glycine (Gly) additive with pH-dependent ionization, which exhibits excellent capability to stabilize Zn anodes in wide-pH aqueous electrolytes. It is discovered that a Gly-ionic EDL facilitates the directed migration of charge carriers in both mildly acidic and alkaline electrolytes, leading to the successful suppression of local saturation. It is worth mentioning that the regulation effect of the additive concentration on the inner Helmholtz plane (IHP) structure of Zn electrodes is clarified in depth. It is revealed that the Gly additives without dimerization can develop orderly and dense vertical adsorption within the IHP to effectively reduce the EDL repulsive force of Zn2+ and isolate H2O from the anode surface. Consequently, they Zn anode with tunable EDL exhibits superior electrochemical performance in a wide range of pH and temperature, involving the prodigious cycle reversibility of 7000 h at Zn symmetric cells with ZnSO4-Gly electrolytes and an extended lifespan of 50 times in Zn symmetric cells with KOH-Gly electrolytes. Moreover, acidic Zn powder||MnO2 pouch cells, and alkaline high-voltage Zn||Ni0.8Co0.1Mn0.1O2 cells, and Zn||NiCo-LDH cells also deliver excellent cycling reversibility. The tunable EDL enables the ultrahigh depth of discharge (DOD) of 93%. This work elucidates the design of electrolyte additives compatible in a wide range of pH and temperature, which might cause inspiration in the fields of practical multiapplication scenarios for Zn anodes.

Tetraphenylporphyrin-based Chelating Ligand Additive as a Molecular Sieving Interfacial Barrier toward Durable Aqueous Zinc Metal Batteries

The sustained water consumption and uncontrollable dendrite growth strongly hamper the practical applications of rechargeable zinc (Zn) metal batteries (ZMBs). Herein, for the first time, we demonstrate that trace amount of chelate ligand additive can serve as a "molecular sieve-like" interfacial barrier and achieve highly efficient Zn plating/stripping. As verified by theoretical modeling and experimental investigations, the benzenesulfonic acid groups on the additive molecular not only facilitates its water solubility and selective adsorption on the Zn anode, but also effectively accelerates the de-solvation kinetics of Zn2+ . Meanwhile, the central porphyrin ring on the chelate ligand effectively expels free water molecules from Zn2+ via chemical binding against hydrogen evolution, and reversibly releases the captured Zn2+ to endow a dendrite-free Zn deposition. By virtue of this non-consumable additive, high average Zn plating/stripping efficiency of 99.7 % over 2100 cycles together with extended lifespan and suppressed water decomposition in the Zn||MnO2 full battery were achieved, thus opening a new avenue for developing highly durable ZMBs.

Strategies for Optimizing the Zn Anode/Electrolyte Interfaces Toward Stable Zn-Based Batteries

Aqueous rechargeable Zn-ion batteries (ARZIBs) have attracted extensive attention because of the advantages of high energy density, high safety, and low cost. However, the commercialization of ARZIBs is still challenging, mainly because of the low efficiency of Zn anodes. Several undesirable reactions (e.g., Zn dendrite and byproduct formation) always occur at the Zn anode/electrolyte interfaces, resulting in low Coulombic efficiency and rapid decay of ARZIBs. Motivated by the great interest in addressing these issues, various optimization strategies and related mechanisms have been proposed to stabilize the Zn anode-electrolyte interfaces and enlengthen the cycling lifespan of ARZIBs. Therefore, considering the rapid development of this field, updating the optimization strategies in a timely manner and understanding their protection mechanisms are highly necessary. This review provides a brief overview of the Zn anode/electrolyte interfaces from the fundamentals and challenges of Zn anode chemistry to related optimization strategies and perspectives. Specifically, these strategies are systematically summarized and classified, while several representative works are presented to illustrate the effect and corresponding mechanism in detail. Finally, future challenges and research directions for the Zn anode/electrolyte interfaces are comprehensively clarified, providing guidelines for accurate evaluation of the interfaces and further fostering the development of ARZIBs.

Oriented Zinc Metal Anode Based on Directional Recognition and Assembly

The practical application of aqueous zinc batteries are highly limited by unsatisfied Zn anodes for the unavoidable dendrite growth and side reactions. Crystal orientation engineering is an effective way to overcome these inherent drawbacks. However, how to achieve Zn plating with manipulated crystallographic orientation is still a great challenge. Herein, a uniform (002)-oriented Zn metal anode is reported based on a directional cation recognition and crystal assembly strategy. The activated layered double hydroxide (Act-LDH) exhibits favorable adsorption energy with Zn2+ and high lattice matching with Zn (002) plane, which can be served as directional recognition layer to anchor Zn2+ and regulate crystallographic orientation of Zn as well. As demonstration, Zn crystals with ultrahigh ratio of (002)/(100) plane of 15.7 are assembled parallelly on horizontal Act-LDH, in which high CE of 99.85% maintains over 18 000 cycles. The symmetric battery with (002)-oriented Zn shows stable plating/stripping process over 1650 and 420 h at 1 mA cm-2 /0.5 mA h cm-2 and 10 mA cm-2 /5 mA h cm-2 , respectively, which is 9 and 12 times higher than unoriented polycrystalline Zn. Moreover, as-assembled full battery displays high specific capacity of 120 mA h g-1 at 2 A g-1 over 1800 cycles.

Dendrite-free zinc metal anodes enabled by electrolyte additive for high-performing aqueous zinc-ion batteries

Rechargeable aqueous zinc (Zn)-ion batteries are regarded as a suitable candidate for large-scale energy storage due to their high safety and the natural abundance of Zn. However, the Zn anode in the aqueous electrolyte faces the challenges of corrosion, passivation, hydrogen evolution reaction, and the growth of severe Zn dendrites. These problems severely affect the performance and service life of aqueous Zn ion batteries, making it difficult to achieve their large-scale commercial applications. In this work, the sodium bicarbonate (NaHCO₃) additive was introduced into the zinc sulfate (ZnSO₄) electrolyte to inhibit the growth of Zn dendrites by promoting uniform deposition of Zn ions on the (002) crystal surface. This treatment presented a significant increase in the intensity ratio of (002) to (100) from an initial value of 11.14 to 15.31 after 40 cycles of plating/stripping. The Zn//Zn symmetrical cell showed a longer cycle life (over 124 h at 1.0 mA cm^-2) than the symmetrical cell without NaHCO₃. Additionally, the high capacity retention rate was increased by 20% for Zn//MnO₂ full cells. This finding is expected to be beneficial for a range of research studies that use inorganic additives to inhibit Zn dendrites and parasitic reactions in electrochemical and energy storage applications.