Research Advances in Amorphous-Crystalline Heterostructures Toward Efficient Electrochemical Applications

Triphasic Ni2P-Ni12P5-Ru with Amorphous Interface Engineering Promoted by Co Nano-Surface for Efficient Water Splitting

This research designs a triphasic Ni2P-Ni12P5-Ru heterostructure with amorphous interface engineering strongly coupled by a cobalt nano-surface (Co@NimPn-Ru) to form a hierarchical 3D interconnected architecture. The Co@NimPn-Ru material promotes unique reactivities toward hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in alkaline media. The material delivers an overpotential of 30 mV for HER at 10 mA cm-2 and 320 mV for OER at 50 mA cm-2 in freshwater. The electrolyzer cell derived from Co@NimPn-Ru(+,-) requires a small cell voltage of only 1.43 V in alkaline freshwater or 1.44 V in natural seawater to produce 10 mA cm-2 at a working temperature of 80 °C, along with high performance retention after 76 h. The solar energy-powered electrolyzer system also shows a prospective solar-to-hydrogen conversion efficiency and sufficient durability, confirming its good potential for economic and sustainable hydrogen production. The results are ascribed to the synergistic effects by an exclusive combination of multi-phasic crystalline Ni2P, Ni12P5, and Ru clusters in presence of amorphous phosphate interface attached onto cobalt nano-surface, thereby producing rich exposed active sites with optimized free energy and multi open channels for rapid charge transfer and ion diffusion to promote the reaction kinetics.

Strong Interface Coupling Enables Stability of Amorphous Meta-Stable State in CoS/Ni3S2 for Efficient Oxygen Evolution

Rational design of heterostructure catalysts through phase engineering strategy plays a critical role in heightening the electrocatalytic performance of catalysts. Herein, a novel amorphous/crystalline (a/c) heterostructure (a-CoS/Ni3S2) is manufactured by a facile hydrothermal sulfurization method. Strikingly, the interface coupling between amorphous phase (a-CoS) and crystalline phase (Ni3S2) in a-CoS/Ni3S2 is much stronger than that between crystalline phase (c-CoS) and crystalline phase (Ni3S2) in crystalline/crystalline (c/c) heterostructure (c-CoS/Ni3S2) as control sample, which makes the meta-stable amorphous structure more stable. Meanwhile, a-CoS/Ni3S2 has more S vacancies (Sv) than c-CoS/Ni3S2 because of the presence of an amorphous phase. Eventually, for the oxygen evolution reaction (OER), the a-CoS/Ni3S2 exhibits a significantly lower overpotential of 192 mV at 10 mA cm-2 compared to the c-CoS/Ni3S2 (242 mV). An exceptionally low cell voltage of 1.51 V is required to achieve a current density of 50 mA cm-2 for overall water splitting in the assembled cell (a-CoS/Ni3S2 || Pt/C). Theoretical calculations reveal that more charges transfer from a-CoS to Ni3S2 in a-CoS/Ni3S2 than in c-CoS/Ni3S2, which promotes the enhancement of OER activity. This work will bring into play a fabrication strategy of a/c catalysts and the understanding of the catalytic mechanism of a/c heterostructures.

Constructing Amorphous-Crystalline Interfacial Bifunctional Site Island-Sea Synergy by Morphology Engineering Boosts Alkaline Seawater Hydrogen Evolution

The development of efficient and durable non-precious hydrogen evolution reaction (HER) catalysts for scaling up alkaline water/seawater electrolysis is highly desirable but challenging. Amorphous-crystalline (A-C) heterostructures have garnered attention due to their unusual atomic arrangements at hetero-interfaces, highly exposed active sites, and excellent stability. Here, a heterogeneous synthesis strategy for constructing A-C non-homogeneous interfacial centers of electrocatalysts on nanocages is presented. Isolated PdCo clusters on nanoscale islands in conjunction with Co3S4 A-C, functioning as a bifunctional site "island-sea" synergy, enable the dynamic confinement design of metal active atoms, resulting in excellent HER catalytic activity and durability. The hierarchical structure of hollow porous nanocages and nanoclusters, along with their large surface area and multi-dimensional A-C boundaries and defects, provides the catalyst with abundant active centers. Theoretical calculations demonstrate that the combination of PdCo and Co3S4 regulates the redistribution of interface electrons effectively, promoting the sluggish water-dissociation kinetics at the cluster Co sites. Additionally, PdCo-Co3S4 heterostructure nanocages exhibit outstanding HER activity in alkaline seawater and long-term stability for 100 h, which can be powered by commercial silicon solar cells. This finding significantly advances the development of alkaline seawater electrolysis for large-scale hydrogen production.

Combating Atherosclerosis with Chirality/Phase Dual-Engineered Nanozyme Featuring Microenvironment-Programmed Senolytic and Senomorphic Actions

Senescence plays a critical role in the development and progression of various diseases. This study introduces an amorphous, high-entropy alloy (HEA)-based nanozyme designed to combat senescence. By adjusting the nanozyme's composition and surface properties, this work analyzes its catalytic performance under both normal and aging conditions, confirming that peroxide and superoxide dismutase (SOD) activity are crucial for its anti-aging therapeutic function. Subsequently, the chiral-dependent therapeutic effect is validated and the senolytic performance of D-handed PtPd2CuFe across several aging models is confirmed. Through multi-Omics analyses, this work explores the mechanism underlying the senolytic action exerted by nanozyme in depth. It is confirm that exposure to senescent conditions leads to the enrichment of copper and iron atoms in their lower oxidation states, disrupting the iron-thiol cluster in mitochondria and lipoic acid transferase, as well as oxidizing unsaturated fatty acids, triggering a cascade of cuproptosis and ferroptosis. Additionally, the concentration-dependent anti-aging effects of nanozyme is validated. Even an ultralow dose, the therapeutic can still act as a senomorphic, reducing the effects of senescence. Given its broad-spectrum action and concentration-adjustable anti-aging potential, this work confirms the remarkable therapeutic capability of D-handed PtPd2CuFe in managing atherosclerosis, a disease involving various types of senescent cells.

Amorphization of MXenes: Boosting Electrocatalytic Hydrogen Evolution

The emergence of amorphous 2D materials has opened up new avenue for materials science and nanotechnology in the recent years. Their unique disordered structure, excellent large-area uniformity, and low fabrication cost make them important for various industrial applications. However, there have no reports on the amorphous MXene materials. In this work, the amorphous Ti2C-MXene (a-Ti2C-MXene) model is built by ab initio molecular dynamics (AIMD) approach. This model is a unique amorphous model, which is totally different from continuous random network (CRN) model for silicate glass and amorphous model for amorphous 2D BN and graphene. The structure analysis shows that the a-Ti2C-MXene composited by [Ti5C] and [Ti6C] cluster, which are surrounded by the region of mixed cluster [TixC], [Ti-Ti] cluster, and [C-C] cluster. There is a high chemical activity for hydrogen evolution reaction (HER) in a-Ti2C-MXene with |ΔGH| 0.001 eV, implying that they serve as the potential boosting HER performance. The work provides insights that can pave the way for future research on novel MXene materials, leading to their increased applications in various fields.

Advanced Synthesis and Characterization of CdO/CdS/ZnO Heterostructures for Solar Energy Applications

This study introduces an innovative method for synthesizing Cadmium Oxide /Cadmium Sulfide/Zinc Oxide heterostructures (CdO/CdS/ZnO), emphasizing their potential application in solar energy. Utilizing a combination of electrochemical deposition and oxygen annealing, the research provides a thorough analysis of the heterostructures through scanning electron microscopy (SEM), energy-dispersive X-ray (EDX) spectroscopy, X-ray diffraction (XRD), Raman spectroscopy, and photoluminescence (PL) spectroscopy. The findings reveal a complex surface morphology and a composite structure with significant contributions from hexagonal CdS and cubic CdO phases. The study highlights the uniformity in the distribution of luminescent centers and the crystalline quality of the heterostructures, which is evident from the PL analysis. The redshift observed in the emission peak and the additional peaks in the excitation spectrum indicate intricate optical properties influenced by various factors, including quantum confinement and lattice strain. The research demonstrates these heterostructures' potential in enhancing solar cells' efficiency and applicability in optoelectronic devices. This comprehensive characterization and analysis pave the way for future optimization and application in efficient and sustainable solar energy solutions.

Interfacial Electronic Interaction in Amorphous-Crystalline CeOx -Sn Heterostructures for Optimizing CO2 to Formate Conversion

Formate, a crucial chemical raw material, holds significant promise for industrial applications in the context of CO2 electroreduction reaction (CO2 RR). Despite its potential, challenges, such as poor selectivity and low formation rate at high current densities persist, primarily due to the competing hydrogen evolution reaction (HER) and high energy barriers associated with *OCHO intermediate generation. Herein, one-step chemical co-reduction strategy is employed to construct an amorphous-crystalline CeOx -Sn heterostructure, demonstrating remarkable catalytic performance in converting CO2 to formate. The optimized CeOx -Sn heterostructures reach a current density of 265.1 mA cm-2 and a formate Faraday efficiency of 95% at -1.07 V versus RHE. Especially, CeOx -Sn achieves a formate current density of 444.4 mA cm-2 and a formate production rate of 9211.8 µmol h-1  cm-2 at -1.67 V versus RHE, surpassing most previously reported materials. Experimental results, coupled with （density functional theory）DFT calculations confirm that robust interface interaction between CeOx and Sn active center induces electron transfer from crystalline Sn site to amorphous CeOx , some Ce4+ of CeOx get electrons and convert to unsaturated Ce3+ , optimizing the electronic structure of active Sn. This amorphous-crystalline heterostructure promotes electron transfer during CO2 RR, reducing the energy barrier formed by *OCHO intermediates, and thus achieving efficient reduction of CO2 to formate.

Application of Amorphous-Crystalline Coupling Materials in Electrocatalysis

Interface engineering has proven to be a highly efficient strategy for modulating the physicochemical properties of electrocatalysts and further enhancing their electrochemical performance in related energy applications. In this context, the newly proposed crystalline-amorphous (c-a) heterostructures with unusual atomic arrangements at interfaces show strong competitiveness. Nonetheless, few efforts have been made to reveal and summarize the structure-activity relationship at the two-phase interface and the corresponding electrocatalytic mechanism. This concept is devoted to comprehensively discussing the fundamental characteristics of crystalline-amorphous electrocatalysts and their application in the field of energy conversion with typical examples. In addition, the development prospects and opportunities of crystalline-amorphous heterostructure are summarized to provide potential development directions for other types of clean energy development.

Regulation Strategy of Nanostructured Engineering on Indium-Based Materials for Electrocatalytic Conversion of CO2

Electrochemical carbon dioxide reduction (CO2 RR), as an emerging technology, can combine with sustainable energies to convert CO2 into high value-added products, providing an effective pathway to realize carbon neutrality. However, the high activation energy of CO2 , low mass transfer, and competitive hydrogen evolution reaction (HER) leads to the unsatisfied catalytic activity. Recently, Indium (In)-based materials have attracted significant attention in CO2 RR and a series of regulation strategies of nanostructured engineering are exploited to rationally design various advanced In-based electrocatalysts, which forces the necessary of a comprehensive and fundamental summary, but there is still a scarcity. Herein, this review provides a systematic discussion of the nanostructure engineering of In-based materials for the efficient electrocatalytic conversion of CO2 to fuels. These efficient regulation strategies including morphology, size, composition, defects, surface modification, interfacial structure, alloying, and single-atom structure, are summarized for exploring the internal relationship between the CO2 RR performance and the physicochemical properties of In-based catalysts. The correlation of electronic structure and adsorption behavior of reaction intermediates are highlighted to gain in-depth understanding of catalytic reaction kinetics for CO2 RR. Moreover, the challenges and opportunities of In-based materials are proposed, which is expected to inspire the development of other effective catalysts for CO2 RR.

Constructing Hierarchical CoGa2O4-S@NiCo-LDH Core-Shell Heterostructures with Crystalline/Amorphous/Crystalline Heterointerfaces for Flexible Asymmetric Supercapacitors

The rational design and construction of composite electrodes are crucial for overcoming the issues of poor working stability and slow ionic electron mobility of a single component. Nevertheless, it is a big challenge to construct core-shell heterostructures with crystalline/amorphous/crystalline heterointerfaces in straightforward and efficient methods. Here, we have successfully converted a portion of crystalline CoGa2O4 into the amorphous phase by employing a facile sulfidation process (denoted as CoGa2O4-S), followed by anchoring crystalline NiCo-layered double hydroxide (denoted as NiCo-LDH) nanoarrays onto hexagonal plates and nucleation points of CoGa2O4-S, synthesizing dual-type hexagonal and flower-like 3D CoGa2O4-S@NiCo-LDH core-shell heterostructures with crystalline/amorphous/crystalline heterointerfaces on carbon cloth. Furthermore, we further adjust the Ni/Co ratio in LDH, achieving precise and controllable core-shell heterostructures. Benefiting from the abundant crystalline/amorphous/crystalline heterointerfaces and synergistic effect among various components, the CoGa2O4-S@Ni2Co1-LDH electrode exhibits a specific capacity of 247.8 mAh·g-1 at 1 A·g-1 and good rate performance. A CoGa2O4-S@Ni2Co1-LDH//AC flexible asymmetric supercapacitor provides an energy density of 58.2 Wh·kg-1 at a power density of 850 W·kg-1 and exhibits an impressive capacitance retention of 105.7% after 10,000 cycles at 10 A·g-1. Our research provides profound insights into the design of other similar core-shell heterostructures.

The synthesis and application of crystalline-amorphous hybrid materials

Crystalline-amorphous hybrid materials (CA-HMs) possess the merits of both pure crystalline and amorphous phases. Abundant dangling bonds, unsaturated coordination atoms, and isotropic structural features in the amorphous phase, as well as relatively high electronic conductivity and thermodynamic structural stability of the crystalline phase simultaneously take effect in CA-HMs. Furthermore, the atomic and bandgap mismatch at the CA-HM interface can introduce more defects as extra active sites, reservoirs for promoted catalytic and electrochemical performance, and induce built-in electric field for facile charge carrier transport. Motivated by these intriguing features, herein, we provide a comprehensive overview of CA-HMs on various aspects-from synthetic methods to multiple applications. Typical characteristics of CA-HMs are discussed at the beginning, followed by representative synthetic strategies of CA-HMs, including hydrothermal/solvothermal methods, deposition techniques, thermal adjustment, and templating methods. Diverse applications of CA-HMs, such as electrocatalysis, batteries, supercapacitors, mechanics, optoelectronics, and thermoelectrics along with underlying structure-property mechanisms are carefully elucidated. Finally, challenges and perspectives of CA-HMs are proposed with an aim to provide insights into the future development of CA-HMs.

Amorphous-crystalline heterostructures enable energy-level matching of cobalt sulfide/nickel iron layered double hydroxide for efficient oxygen evolution reaction

Interface engineering of heterostructures has emerged as a promising approach to enhance the catalytic activity of nonprecious electrocatalysts. Herein, a novel amorphous cobalt sulfide-crystalline nickel iron layered double hydroxide (a-CoS@NiFe-LDH) hybrid material is presented for application as an electrocatalyst for oxygen evolution reaction (OER). Benefitting from the well-matched energy level structures, the a-CoS@NiFe-LDH catalyst delivers a low overpotential of 221 ± 14 mV at an OER current density of 20 mA cm-2 and a small Tafel slope of 83.1 mV dec-1, showing good OER properties. First-principle computations reveal that the electronic interaction between amorphous cobalt sulfide (a-CoS) and crystalline nickel iron layered double hydroxide (NiFe-LDH) components within a-CoS@NiFe-LDH promotes the adsorbate evolution mechanism and reduces the adsorption energies for oxygen intermediates, thereby enhancing the activity and stability for OER. This work opens up a new avenue to enhance the OER catalytic efficiency via the construction of amorphous-crystalline heterostructures.

Sulfur-Induced Low Crystallization of Ultrathin Pd Nanosheet Arrays for Sulfur Ion Degradation-Assisted Energy-Efficient H2 Production

The utilization of thermodynamically favorable sulfur oxidation reaction (SOR) as an alternative to sluggish oxygen evolution reaction is a promising technology for low-energy H₂ production while degrading the sulfur source from wastewater. Herein, amorphous/crystalline S-doped Pd nanosheet arrays on nickel foam (a/c S-Pd NSA/NF) is prepared by S-doping crystalline Pd NSA/NF.  Owing to the ultrathin amorphous nanosheet structure and the incorporation of S atoms, the a/c S-Pd NSA/NF provides a large number of active sitesand the optimized electronic structure, while exhibiting outstanding electrocatalytic activity in hydrogen evolution reaction (HER) and SOR. Therefore, the coupling system consisting of SOR-assisted HER can reach a current density of 100 mA cm^-2 at 0.642 V lower than conventional electrolytic water by 1.257 V, greatly reducing energy consumption. In addition, a/c S-Pd NSA/NF can generate H₂ over a long period of time while degrading S^2- in water to the value-added sulfur powder, thus further reducing the cost of H₂ production. This work proposes an attractive strategy for the construction of an advanced electrocatalyst for H₂ production and utilization of toxic sulfide wastewater by combining S-doping induced partial amorphization and ultrathin metal nanosheet arrays.