Microfluidics-Assisted Synthesis of Hierarchical Cu2 O Nanocrystal as C2 -Selective CO2 Reduction Electrocatalyst

ICP-MS Assisted EDX Tomography: A Robust Method for Studying Electrolyte Penetration Phenomena in Gas Diffusion Electrodes Applied to CO2 Electrolysis

A carbon paper-based gas diffusion electrode (GDE) is used with a bismuth(III) subcarbonate active catalyst phase for the electrochemical reduction of CO2 in a gas/electrolyte flow-by configuration electrolyser at high current density. It is demonstrated that in this configuration, the gas and catholyte phases recombine to form K2CO3/KHCO3 precipitates to an extent that after electrolyses, vast amount of K+ ions is found by EDX mapping in the entire GDE structure. The fact that the entirety of the GDE gets wetted during electrolysis should, however, not be interpreted as a sign of flooding of the catalyst layer, since electrolyte perspiring through the GDE can largely be removed with the outflow gas, and the efficiency of electrolysis (toward the selective production of formate) can thus be maintained high for several hours. For a full spatial scale quantitative monitoring of electrolyte penetration into the GDE, (relying on K+ ions as tracer) the method of inductively coupled plasma-mass spectrometry (ICP-MS) assisted energy dispersive X-ray (EDX) tomography is introduced. This new, cheap and robust tomography of non-uniform aspect ratio has a large planar span that comprises the entire GDE surface area and a submicrometer depth resolution, hence it can provide quantitative information about the amount and distribution of K+ remnants inside the GDE structure, in three dimensions.

Atomic/molecular layer deposition strategies for enhanced CO2 capture, utilisation and storage materials

Elevated levels of carbon dioxide (CO2) in the atmosphere and the diminishing reserves of fossil fuels have raised profound concerns regarding the resulting consequences of global climate change and the future supply of energy. Hence, the reduction and transformation of CO2 not only mitigates environmental pollution but also generates value-added chemicals, providing a dual remedy to address both energy and environmental challenges. Despite notable advancements, the low conversion efficiency of CO2 remains a major obstacle, largely attributed to its inert chemical nature. It is imperative to engineer catalysts/materials that exhibit high conversion efficiency, selectivity, and stability for CO2 transformation. With unparalleled precision at the atomic level, atomic layer deposition (ALD) and molecular layer deposition (MLD) methods utilize various strategies, including ultrathin modification, overcoating, interlayer coating, area-selective deposition, template-assisted deposition, and sacrificial-layer-assisted deposition, to synthesize numerous novel metal-based materials with diverse structures. These materials, functioning as active materials, passive materials or modifiers, have contributed to the enhancement of catalytic activity, selectivity, and stability, effectively addressing the challenges linked to CO2 transformation. Herein, this review focuses on ALD and MLD's role in fabricating materials for electro-, photo-, photoelectro-, and thermal catalytic CO2 reduction, CO2 capture and separation, and electrochemical CO2 sensing. Significant emphasis is dedicated to the ALD and MLD designed materials, their crucial role in enhancing performance, and exploring the relationship between their structures and catalytic activities for CO2 transformation. Finally, this comprehensive review presents the summary, challenges and prospects for ALD and MLD-designed materials for CO2 transformation.

Strategies to Modulate the Copper Oxidation State Toward Selective C2+ Production in the Electrochemical CO2 Reduction Reaction

The electrochemical reduction of CO2 to form value-added chemicals receives considerable attention in recent years. Copper (Cu) is recognized as the only element capable of electro-reducing CO2 into hydrocarbons with two or more carbon atoms (C2+), but the low product selectivity of the Cu-based catalyst remains a major technological challenge to overcome. Therefore, identification of the structural features of Cu-based catalysts is of great importance for the highly selective production of C2+ products (ethylene, ethanol, n-propanol, etc.), and the oxidation state of Cu species in the catalysts is found critical to the catalyst performance. This review introduces recent efforts to fine-tune the oxidation state of Cu to increase carbon capture and produce specific C2+ compounds, with the intention of greatly expediting the advance in the catalyst designs. It also points to the remaining challenges and fruitful research directions for the development of Cu-based catalysts that can shape the practical CO2 reduction technology.

Electrocatalytic CO2 Reduction to C2+ Products in Flow Cells

Electrocatalytic CO2 reduction into value-added fuels and chemicals by renewable electric energy is one of the important strategies to address global energy shortage and carbon emission. Though the classical H-type electrolytic cell can quickly screen high-efficiency catalysts, the low current density and limited CO2 mass transfer process essentially impede its industrial applications. The electrolytic cells based on electrolyte flow system (flow cells) have shown great potential for industrial devices, due to higher current density, improved local CO2 concentration, and better mass transfer efficiency. The design and optimization of flow cells are of great significance to further accelerate the industrialization of electrocatalytic CO2 reduction reaction (CO2 RR). In this review, the progress of flow cells for CO2 RR to C2+ products is concerned. Firstly, the main events in the development of the flow cells for CO2 RR are outlined. Second, the main design principles of CO2 RR to C2+ products, the architectures, and types of flow cells are summarized. Third, the main strategies for optimizing flow cells to generate C2+ products are reviewed in detail, including cathode, anode, ion exchange membrane, and electrolyte. Finally, the preliminary attempts, challenges, and the research prospects of flow cells for industrial CO2 RR toward C2+ products are discussed.

Opening Direct Electrochemical Fischer-Tropsch Synthesis Path by Interfacial Engineering of Cu Electrode with P-Block Elements

The electrochemical synthesis of syngas (CO and H2) has garnered considerable attention in the context of Fischer-Tropsch (FT) synthesis employing thermal catalysts. Nonetheless, the need for a novel, cost-effective technique persists. In this investigation, we introduce a direct electrochemical (dEC) approach for FT synthesis that functions under ambient conditions by utilizing a p-block element (Sn and In) overlaid Cu electrode. Surface *CO and H* species were obtained in an electrolytic medium through the CO2 + H+ + e- → HOOCad → *CO (or direct CO adsorption) and H+ + e- → H* reactions, respectively. We have observed C2-7 long-chain hydrocarbons with a CnH2n+2/CnH2n ratio of 1-3, and this observation can be explained through the process of C-C coupling chain growth of the conventional FT synthesis, based on the linearity of the Anderson-Schulz-Flory equation plots. Thick Sn and In overlayers resulted in the dominant production of formate, while CO and C2H4 production were found to be proportional and inversely correlated to H2, C2H6, and C3-7 hydrocarbon production. The EC CO2/CO reduction used in dEC FT synthesis offers valuable insights into the mechanism of C2+ production and holds promise as an eco-friendly approach to producing long-chain hydrocarbons for energy and environmental purposes.

Cu-based catalyst designs in CO2 electroreduction: precise modulation of reaction intermediates for high-value chemical generation

The massive emission of excess greenhouse gases (mainly CO2) have an irreversible impact on the Earth's ecology. Electrocatalytic CO2 reduction (ECR), a technique that utilizes renewable energy sources to create highly reduced chemicals (e.g. C2H4, C2H5OH), has attracted significant attention in the science community. Cu-based catalysts have emerged as promising candidates for ECR, particularly in producing multi-carbon products that hold substantial value in modern industries. The formation of multi-carbon products involves a range of transient intermediates, the behaviour of which critically influences the reaction pathway and product distribution. Consequently, achieving desirable products necessitates precise regulation of these intermediates. This review explores state-of-the-art designs of Cu-based catalysts, classified into three categories based on the different prospects of the intermediates' modulation: heteroatom doping, morphological structure engineering, and local catalytic environment engineering. These catalyst designs enable efficient multi-carbon generation in ECR by effectively modulating reaction intermediates.

Atomic Layer Deposition of Cu Electrocatalysts on Gas Diffusion Electrodes for CO2 Reduction

Electrochemical reduction of CO2 using Cu catalysts enables the synthesis of C2+ products including C2H4 and C2H5OH. In this study, Cu catalysts were fabricated using plasma-enhanced atomic layer deposition (PEALD), achieving conformal deposition of catalysts throughout 3-D gas diffusion electrode (GDE) substrates while maintaining tunable control of Cu nanoparticle size and areal loading. The electrochemical CO2 reduction at the Cu surface yielded a total Faradaic efficiency (FE) > 75% for C2+ products. Parasitic hydrogen evolution was minimized to a FE of ∼10%, and a selectivity of 42.2% FE for C2H4 was demonstrated. Compared to a line-of-sight physical vapor deposition method, PEALD Cu catalysts show significant suppression of C1 products compared to C2+, which is associated with improved control of catalyst morphology and conformality within the porous GDE substrate. Finally, PEALD Cu catalysts demonstrated a stable performance for 15 h with minimal reduction in the C2H4 production rate.

Probing Cation Effects on *CO Intermediates from Electroreduction of CO2 through Operando Raman Spectroscopy

Cations in an electrolyte modulate microenvironments near the catalyst surface and affect product distribution from an electrochemical CO2 reduction reaction, and thus, their interaction with intermediate states has been tried to be probed. Herein, we directly observed the cation effect on *CO intermediates on the Cu(OH)2-derived catalyst in real time through operando surface-enhanced Raman spectroscopy at high overpotentials (-1.0 VRHE). Atop *CO peaks are composed of low-frequency binding *CO (*COLFB) and high-frequency binding *CO (*COHFB) because of their adsorption sites. These two *CO intermediates are found to have different sensitivities to the cation-induced field, and each *CO is proposed to be suitably stabilized for efficient C-C coupling. The proportions between *COHFB and *COLFB are dependent on the type of alkali cations, and the increases in the *COHFB ratio have a high correlation with selective C2H4 production under K+ and Cs+, indicating that *COHFB is the dominant and fast active species. In addition, as the hydrated cation size decreases, *COLFB is more sensitively red-shifted than *COHFB, which promotes C-C coupling and suppresses C1 products. Through time-resolved operando measurements, dynamic changes between the two *CO species are observed, showing the rapid initial adsorption of *COHFB and subsequently reaching a steady ratio between *COLFB and *COHFB.

Trace Ionic Liquid-Assisted Orientational Growth of Cu2 O (110) Facets Promote CO2 Electroreduction to C2 Products

Cu2 O has great advantages for CO2 electroreduction to C2 products, of which the activity and selectivity are closely related to its crystal facets. In this work, density functional theory calculation indicated that the (110) facets of Cu2 O had a lower energy barrier for the C-C coupling compared to the (100) and (111) facets. Therefore, Cu2 O(110) facets were successfully synthesized with the assistance of trace amounts of the ionic liquid 1-butyl-3-methylimidazolium ([Bmim]BF4 ) by a sample wet-chemical method. A high faradaic efficiency of 71.1 % and a large current density of 265.1 mA cm-2 toward C2 H4 and C2 H5 OH were achieved at -1.1 V (vs. reversible hydrogen electrode) in a flow cell. The in situ and electrochemical analysis indicated that it possessed the synergy effects of strong adsorption of *CO2 and *CO, large active area, and excellent conductivity. This study provided a new way to enhance the C2 selectivity of CO2 electroreduction on Cu2 O by crystal structure engineering.

Polymer-Covered Copper Catalysts Alter the Reaction Pathway of the Electrochemical CO2 Reduction Reaction

The electrochemical CO₂ reduction reaction (CO₂RR) has attracted considerable attention recently due to the potential conversion of atmospheric CO₂ into useful organic products by utilizing electricity from renewable energy sources. However, the selective formation of desired products only via CO₂RR has been elusive due to the presence of a myriad of competing reaction pathways, thus calling for effective strategies controlling the reaction coordinates. The control of binding energies of the reaction intermediate, such as *CO, is pivotal to manipulating reaction pathways, and various attempts have been made to accomplish this goal. Herein, we introduce recent endeavors to increase the catalytic selectivity of Cu-based catalysts by surface modification with polymer coating, which can change the local pH, hydrophilicity/hydrophobicity, reaction concentration, etc. The polymer conjugation also contributed to the enhanced electrocatalytic stability of Cu-based catalysts during the CO₂RR. We also point to the remaining challenges and provide perspectives on the further development of Cu-polymer hybrid catalysts for the practical CO₂RR.

Revealing the Mechanism of sp-N Doping in Graphdiyne for Developing Site-Defined Metal-Free Catalysts

Due to the limited reserves of metals, scientists are devoted to exploring high-performance metal-free catalysts based on carbon materials to solve environment-related issues. Doping would build up inhomogeneous charge distribution on surface, which is an efficient approach for boosting the catalytic performance. However, doping sites are difficult to control in traditional carbon materials, thus hindering their development. Taking the advantage of unique sp-C in graphdiyne (GDY), a new N doping configuration of sp-hybridized nitrogen (sp-N), bringing a Pt-comparable catalytic activity in oxygen reduction reaction is site-defined introduced. However, the reaction intermediate of this process is never captured, hindering the understanding of the mechanism and the precise synthesis of metal-free catalysts. After the four-year study, the fabrication of intermediate-like molecule is realized, and finally sp-N doped GDY via the pericyclic reaction is obtained. Compared with GDY doped with other N configurations, the designed sp-N GDY shows much higher catalytic activity in electroreduction of CO₂ toward CH₄ production, owing to the unique electronic structure introduced by sp-N, which is more favorable in stabilizing the intermediate. Thus, besides opening the black-box for the site-defined doping, this work reveals the relationship between doping configuration and products of CO₂ reduction.

A Critical Study of Cu2O: Synthesis and Its Application in CO2 Reduction by Photochemical and Electrochemical Approaches

Copper oxide (Cu2O) is a potential material as a catalyst for CO2 reduction. Cu2O nanostructures have many advantages, including interfacial charge separation and transportation, enhanced surface area, quantum efficiency, and feasibility of modification via composite development or integration of the favorable surface functional groups. We cover the current advancements in the synthesis of Cu2O nanomaterials in various morphological dimensions and their photochemical and electrochemical applications, which complies with the physical enrichment of their enhanced activity in every application they are employed in. The scope of fresh designs, namely composites or the hierarchy of copper oxide nanostructures, and various ways to improve CO2 reduction performance are also discussed in this review. Photochemical and electrochemical CO2 transformations have received tremendous attention in the last few years, thanks to the growing interest in renewable sources of energy and green facile chemistry. The current review provides an idea of current photochemical and electrochemical carbon dioxide fixing techniques by using Cu2O-based materials. Carboxylation and carboxylative cyclization, yield valuable chemicals such as carboxylic acids and heterocyclic compounds. Radical ions, which are induced by photo- and electrochemical reactions, as well as other high-energy organic molecules, are regarded as essential mid-products in photochemical and electrochemical reactions with CO2. It has also been claimed that CO2 can be activated to form radical anions.