Sonication-mediated modulation of macronutrient structure and digestibility in chickpea

Ultrasound processing is an emerging green technology that has the potential for wider application in the food processing industry. While the effects of ultrasonication on isolated macromolecules such as protein and starch have been reported, the effects of physical barriers on sonication on these macro-molecules, for example inside whole seed, tissue or cotyledon cells, have mostly been overlooked. Intact chickpea cells were subjected to sonication with different ultrasound processing times, and the effects of sonication on the starch and protein structure and digestibility were studied. The digestibility of these macronutrients significantly increased with the extension of processing time, which, however was not due to the molecular degradation of starch or protein but related to damage to cell wall macro-structure with increasing sonication time, leading to enhanced enzyme accessibility. Through this study, it is demonstrated that ultrasound processing has least effect on whole food structure, for example, whole seeds but can modulate the nutrient bioavailability without changing the properties of the macronutrients in seed fractions e.g. intact cells, offering new scientific knowledge on effect of ultrasound in whole foods at various length scales.

Effect of ultrasound geometry on the production efficiency of damaged starch: Determining rheology parameters, and non-isothermal reaction kinetics

Present study investigates the effects of probe size geometry on thermodynamic kinetics, rheology, and microstructure of wheat and tapioca starch. Ultrasound treatment using different probe diameters (20 mm and 100 mm) significantly influenced the gelatinization process. Results showed reduced enthalpy (ΔH) and Gibbs energy (ΔG), indicating enhanced gelatinization efficiency. According to the results, using a 20 mm and 100 mm probe leads to a reduction of 52.7 % and 68.6 % in reaction enthalpy for wheat starch compared to native starch, respectively. Microstructure analysis revealed structural changes, with ultrasound treatment leading to granular fractures and a sheet-like structure with air bubbles. The rheological behavior of the starches is found to exhibit shear thinning behavior, with the Casson model providing the best fit for the experimental data. Moreover, rheology modeling using Herschel-Bulkley and power law models showed increased viscosity and shear stress in larger probes. Numerical simulation data demonstrated that probe size influenced ultrasonic pressure, sound pressure level, and thermal power dissipation density, affecting fluid motion and velocity field components. Moreover, the maximum dissipated power decreases from 8.43 to 0.655 mW/m3 with an increase in probe diameter from 20 to 100 mm. The average yield shear stress values are calculated as 3.36 and 3.14 for wheat and tapioca starches, respectively. The larger probe diameter leads to greater entropy increases, with tapioca starch showing a 4.72 % increase and wheat starch a 4.97 % increase, compared to 2.56 % and 3.11 %, respectively, with the smaller probe. Additionally, the Keller-Miksis model provided insights into bubble dynamics, revealing increased pressure and temperature with higher pressure amplitudes.

Ultrasonication followed by aqueous two-phase system for extraction, on-site modification and isolation of microalgal starch with reduced digestibility

Microalgae are new and sustainable sources of starch with higher productivity and flexible production modes than conventional terrestrial crops, but the downstream processes need further development. Here, ultrasonication (with power of 200 W or 300 W and duration of 10, 15, 20, or 25 min) was applied to simultaneously extract and modify starch from a marine microalga Tetraselmis subcordiformis for reducing the digestibility, and an aqueous two-phase system (ATPS) of ethanol/NaH2PO4 was then used to isolate the starches with varied properties. Increasing ultrasonic duration facilitated the partition of starch into the bottom pellet, while enhancing the ultrasonic power was conducive to the allocation in the interphase of the ATPS. The overall starch recovery yield reached 73 ∼ 87 % and showed no significant difference among the ultrasonic conditions tested. The sequential ultrasonication-ATPS process successfully enriched the starch with purities up to 65 % ∼ 88 %, which was among the top levels reported in microalgal starch isolated. Ultrasonication produced more amylose which was mainly fractionated into the interface of the ATPS. The digestibility of the starch was altered under different ultrasonic conditions and varied from different ATPS phases as well, with the one under the ultrasonic power of 200 W for 15 min at the bottom pellet having the highest resistant starch content (RS, 39.7 %). The structural and compositional analysis evidenced that the ultrasonication-ATPS process could exert impacts on the digestibility through altering the surface roughness and fissures of the starch granules, modulating the impurity compositions (protein and lipid) that could interact with starch, and modifying the long- and short-range ordered structures. The developed ultrasonication-ATPS process provided novel insights into the mechanism and strategy for efficient production of functional starch from microalgae with a potential in industrial application.

Starch nanoparticles with predictable size prepared by alternate treatments of ball milling and ultrasonication

In this study, starch nanoparticles (SNPs) were prepared by alternate treatments of liquid nitrogen ball milling and ultrasonication. The impact, shear and friction forces produced by ball milling, and acoustic cavitation and shear effects generated by ultrasonication disrupted starch granules to prepare SNPs. The SNPs possessed narrow particle size distribution (46.91-210.52 nm) and low polydispersity index (0.28-0.45). Additionally, the SNPs exhibited the irregular fragments with good uniformity. The relative crystallinity decreased from 34.91 % (waxy corn starch, WCS) to 0-25.91 % (SNPs), and the absorbance ratios of R1047/1022 decreased from 0.81 (WCS) to 0.60-0.76 (SNPs). The SNPs had lower thermal stability than that of WCS, characterized by a decrease in Td (temperature at maximum weight loss) from 309.39 °C (WCS) to 300.39-305.75 °C (SNPs). Furthermore, the SNPs exhibited excellent swelling power (3.48-28.02 %) and solubility (0.34-0.97 g/g). Notably, oil absorption capacity of the SNPs (9.77-15.67 g/g) was rather greater than that of WCS (1.33 g/g). Furthermore, the SNPs possessed the lower storage modulus (G'), loss modulus (G″) and viscosity than that of WCS. The SNPs with predictable size and high dispersion capability prepared in this study lay a foundation for expanding the application of SNPs.

Preparation of the black rice starch-gallic acid complexes by ultrasound treatment: Physicochemical properties, multiscale structure, and in vitro digestibility

This study aimed to investigate the multiscale structure, physicochemical properties, and in vitro digestibility of black rice starch (BRS) and gallic acid (GA) complexes prepared using varying ultrasound powers. The findings revealed that ultrasonic treatment disrupted BRS granules while enhancing the composite degree with GA. The starch granules enlarged and aggregated into complexes with uneven surfaces. Moreover, the crystallinity of the BRS-GA complexes increased to 22.73 % and formed V6-I-type complexes through non-covalent bonds. The increased short-range ordering of the complexes and nuclear magnetic resonance hydrogen (1H NMR) further indicated that the BRS and GA molecules interacted mainly through non-covalent bonds such as hydrogen bonds. Additionally, ultrasound reduced the viscoelasticity of the complexes while minimizing the mass loss of the complexes at the same temperature. In vitro digestion results demonstrated an increase in resistant starch content up to 37.60 % for the BRS-GA complexes. Therefore, ultrasound contributes to the formation of V-typed complexes of BRS and GA, which proves the feasibility of using ultrasound alone for the preparation of starch and polyphenol complexes while providing a basis for the multiscale structure and digestibility of polyphenol and starch complexes.

Impact of ultrasound treatment on the structural modifications and functionality of carbohydrates - A review

Carbohydrates are crucial in food as essential biomolecules, serving as natural components, ingredients, or additives. Carbohydrates have numerous applications in the food industry as stabilizers, thickeners, sweeteners, and humectants. The properties and functionality of the carbohydrates undergo alterations when exposed to various thermal or non-thermal treatments. Ultrasonication is a non-thermal method that modifies the structural arrangement of carbohydrate molecules. These structural changes lead to enhanced gelling and viscous nature of the carbohydrates, thus enhancing their scope of application. Ultrasound may improve carbohydrate functionality in an environmentally sustainable way, leaving no chemical residues. The high-energy ultrasound treatments significantly reduce the molecular size of complex carbohydrates. Sonication parameters like treatment intensity, duration of treatment, and energy applied significantly affect the molecular size, depolymerization, viscosity, structural modifications, and functionality of carbohydrate biomolecules. This review provides a comprehensive analysis of ultrasound-assisted modifications in carbohydrates and the changes in functional properties induced by sonication.

Expanded porous-starch matrix as an alternative to porous starch granule: Present status, challenges, and future prospects

Exposing the hydrated-soft-starch matrix of intact grain or reconstituted flour dough to a high-temperature-short-time (HTST) leads to rapid vapor generation that facilitates high-pressure build-up in its elastic matrix linked to large deformation and expansion. The expanded starch matrix at high temperatures dries up quickly by flash vaporization of water, which causes loss of its structural flexibility and imparts a porous and rigid structure of the expanded porous starch matrix (EPSM). EPSM, with abundant pores in its construction, offers adsorptive effectiveness, solubility, swelling ability, mechanical strength, and thermal stability. It can be a sustainable and easy-to-construct alternative to porous starch (PS) in food and pharmaceutical applications. This review is a comparative study of PS and EPSM on their preparation methods, structure, and physicochemical properties, finding compatibility and addressing challenges in recommending EPSM as an alternative to PS in adsorbing, dispersing, stabilizing, and delivering active ingredients in a controlled and efficient way.

Molecular morphology & interactions, functional properties, rheology and in vitro digestibility of ultrasonically modified pearl millet and sorghum starches

The present research investigated to study the effect of ultrasound treatment on isolated pearl millet starch (PMS) and sorghum starch (SS). Ultrasonication was applied to PMS and SS for 10, 15, and 20 min. Ultrasonically modified pearl millet and sorghum starches evaluated for their techno-functionality, pasting profile, morphology, in vitro starch digestibility, XRD, and molecular interactions. Ultrasound treatment increased water and oil absorption capacity, swelling power, and solubility with treatment time. For ultrasonicated PMS and SS, a significant increase (p < 0.05) in paste clarity (PC) (70.05 % and 67.23 %), freeze-thawing stability (FTS), gel consistency (GC) (25.05 mm and 32.95 mm), and in vitro starch digestibility were observed (57.70 g/100 g and 50.29 g/100 g), whereas no significant changes were recorded for the color values after the ultrasound treatment. Variations in pasting property were also observed in ultrasonicated starches with treatment duration. SEM images confirmed ultrasonication mainly forms pores and indentations on starch granule surface. FTIR spectra and X-ray diffractogram for ultrasonicated starches revealed a slight decrease in the peak intensity and A-type X-ray pattern with lower relative crystallinity (RC) than the native starches. G' > G″ value, indicating the elastic behavior and lower tan δ value, depicting viscous behavior and high gel strength.

The effect of non-thermal physical modification on the structure, properties and chemical activity of starch: A review

Non-thermal physical treatments has obvious advantages in regulating the structure and properties of starch compared with chemical treatment. Hance, this article summarized and compared the effects of three kinds of non-thermal physical treatments including grinding and ball milling, high hydrostatic pressure and ultrasonic on the structure, properties and chemical activity of starches from different plants. The potential applications of non-thermal physical modified starch were introduced. And strategies to solve the problems in the current research were put forward. It is found that although starch has a dense structure, the starch granules could be deformed under three kinds of non-thermal physical treatments, which could damage the granule morphology, microstructure, and crystal structure of starch, reduce particle size, increase solubility and swelling power, and promote starch gelatinization. Three kinds of non-thermal physical treated starch could be used as flocculant thickener, starch based edible films and fat substitutes. Non-thermal physical treatments caused the structure of starch to undergo three stages, which were similar to mechanochemical effects. When starch was in the stress stage and the transition stage from aggregation to agglomeration, its active sites significantly increase and move inward, ultimately leading to a significant increase in the chemical activity of starch.

The Effect of Dual-Modification by Heat-Moisture Treatment and Octenylsuccinylation on Physicochemical and Pasting Properties of Arrowroot Starch

Starch is widely applied in various industrial sectors, including the food industry. Starch is used as a thickener, stabilizer, or emulsifier. However, arrowroot starch generally has weaknesses, such as unstable under heating and acidic conditions, which are generally applied to processing in the food industry. Modifications were applied to improve the characteristics of native arrowroot starch. In this study, arrowroot starch was modified by heat-moisture treatment (HMT), octenylsuccinylation (OSA), and dual modification between OSA and HMT in a different sequence--namely, HMT followed by OSA, and OSA followed by HMT. This study aims to determine the effect of different modification methods on the physicochemical and functional properties of native arrowroot starch. The result shows that both single HMT and dual modification caused damage to native starch granules, such as the formation of cracks and roughness. For single OSA treatment, especially, there is no significant change in granule morphology after modification. All modification treatments did not change the crystalline type of starch but reduced the RC of native starch. Both single HMT and dual modifications (HMT-OSA, OSA-HMT) increased pasting temperature and setback, but, conversely, decreased the peak and the breakdown viscosity of native starch, whereas single OSA had the opposite trend compared with the other modifications. HMT played a greater role in increasing the thermal stability and the retrogradation ability of arrowroot starch. Both single modifications (HMT and OSA) increased the hardness and gumminess of native starch, and the opposite was true for the dual modifications. HMT had a greater effect on color characteristics, where the lightness and whiteness index of native arrowroot starch decreased. Single OSA modification increased swelling volume higher than dual modification. Both single HMT and dual modifications increased water absorption capacity and decreased the oil absorption capacity of native arrowroot starch.

Characteristics of physically modified starches

Starch is an abundant natural, non-toxic, biodegradable polymer. Due to its low price, it is used for various purposes in various fields such as the cosmetic, paper, and construction industries as well as the food industry. Due to recent consumer interest in clean label materials, physically modified starch is attracting attention. Manufacturing methods of physically modified starch include pregelatinization, hydrothermal treatment such as heat moisture treatment and annealing, hydrostatic pressure treatment, ultrasonic treatment, milling, and freezing. In this study, toward development of clean label materials, manufacturing methods and characteristics of physically modified starches were discussed.

Combined ultrasound and germination treatment on the fine structure of highland barley starch

Highland barley is a grain crop grown in Tibet, China. This study investigated the structure of highland barley starch using ultrasound (40 kHz, 40 min, 165.5 W) and germination treatments (30℃ with 80% relative humidity). The macroscopic morphology and the barley's fine and molecular structure were evaluated. After sequential ultrasound pretreatment and germination, a significant difference in moisture content and surface roughness was noted between highland barley and the other groups. All test groups showed an increased particle size distribution range with increasing germination time. FTIR results also indicated that after sequential ultrasound pretreatment and germination, the absorption intensity of the intramolecular hydroxyl (-OH) group of starch increased, and hydrogen bonding was stronger compared to the untreated germinated sample. In addition, XRD analysis revealed that starch crystallinity increased following sequential ultrasound treatment and germination, but a-type of crystallinity remained after sonication. Further, the Mw of sequential ultrasound pretreatment and germination at any time is higher than that of sequential germination and ultrasound. As a result of sequential ultrasound pretreatment and germination, changes in the content of chain length of barley starch were consistent with germination alone. At the same time, the average degree of polymerisation (DP) fluctuated slightly. Lastly, the starch was modified during the sonication process, either prior to or following sonication. Pretreatment with ultrasound illustrated a more profound effect on barley starch than sequential germination and ultrasound treatment. In conclusion, these results indicate that sequential ultrasound pretreatment and germination improve the fine structure of highland barley starch.

Physicochemical, structural, and rheological characteristics of corn starch after thermal-ultrasound processing

Thermal-ultrasound treatment is a green technology that can significantly alter the structural and functional properties of starches. This research extend the effect of at different temperatures (25 °C, 45 °C, and 65 °C) and times (30 and 60 min) on the physicochemical, structural, and rheological properties of corn starch was studied. Amylose content, solubility, swelling power, and the least gelling content increased with increasing temperature and time. Starch treated at 45 °C for 30 min had the lowest syneresis among all treatments. Thermal-ultrasound treatment at 25 °C and 65 °C for 60 min caused increasing paste clarity. Microscopic observations demonstrated that the starch granules were agglomerated at 65 °C. Although the crystallinity of samples decreased from 35.42% to 8.94%, the storage modulus was more than the loss modulus during the frequency sweep test. Pasting properties showed that pasting temperatures shifted to higher values after treatment. Nonetheless, the maximum viscosity decreased, and the final viscosity of the treated samples demonstrated that short-term retrogradation could deteriorate. Results showed that thermal-ultrasound is a viable technique for starch modification compared to conventional thermal and ultrasound treatments.

Modification of the microstructure of tef [Eragrostis tef (Zucc.) Trotter] flour ultrasonicated at different temperatures. Impact on its techno-functional and rheological properties

Tef flour comes from a nutritionally-rich ancient grain gaining increasing interest in gluten-free market. Gluten-free sources are modified by different means to improve their functionality. Ultrasound treatment (US) alters flours' structure and leads to physically modified flours with a wider application range. The aim of the present work was to evaluate the impact of US treatments of moderate treatment time, 10 min, and high concentration of the aqueous flour dispersion, 25%, on the microstructural, starch damage, apparent amylose content, techno-functional, pasting and rheological properties of two tef flour varieties, white and brown. Temperature was varied (20, 40, 45, 50, and 55 °C) to modulate the impact of sonication. US treatments led to general particle fragmentation which markedly increased starch damage and lightness (L*) values. Apparent amylose content was higher after ultrasonication, as consequence of molecular fragmentation due to cavitation. Increased starch granules' exposed area led to enhanced interaction with water, promoting the water absorption index (WAI) and swelling power (SP) of treated flours. Pasting properties showed increased pasting temperatures as well as decreased viscometric profiles with lower breakdown viscosities, indicative of starch rearrangement improved by increasing temperature. Rheological properties indicated higher consistency in gels after US treatments, with improved ability to withstand stress and lower values of tan(δ)1 reflecting a higher solid-like behavior and higher strength of the gel. Temperature was found to be a crucial variable during US treatments, showing an improved degree of modification at higher temperatures in ultrasonicated tef flours, following the same trend in both varieties.

Impact of Solubilized Substances on the Techno-Functional, Pasting and Rheological Properties of Ultrasound-Modified Rice, Tef, Corn and Quinoa Flours

The modification of flours by ultrasound (US) treatments requires excess water to suspend the sample to be treated, which must be removed after treatment to recover the ultrasonicated flour. The aim of this study was to determine the influence that the water removal method has on the final characteristics of US-treated gluten-free flours (rice, brown tef, corn and quinoa). US treatment parameters were constant, and two water removal methods were studied: freeze-drying and centrifugation + drying. The elimination of water by centrifugation resulted in the loss of solubilized compounds from the treated flours, which led to important differences between the final characteristics of US-treated flours. Ultrasonication resulted in the reduction of flours' particle size and modification of their color parameters. Techno-functional properties were modified by US treatment, where the water removal method was more influential in whole grain samples (brown tef and quinoa). Few differences were found in thermal properties among pairs of US-treated samples, indicative that the effect caused to starch was mainly attributed to ultrasonication conditions than to the drying method. The water removal method markedly influenced the pasting properties of US-treated flours, resulting in lower profiles when freeze-drying was applied and higher profiles when flours were retrieved by centrifugation. Gels made with tef, corn and quinoa presented reduced tan(δ)₁ values after sonication, while gels made with rice did not show any modification. The water removal method is a decisive step in US treatments, defining the final characteristics of the treated matter, and having a great influence in the modification attributed to ultrasonication.

High-amylose maize starch: Structure, properties, modifications and industrial applications

High-amylose maize refers to a special type of maize cultivar with a 50 %-90 % amylose content of the total starch. High-amylose maize starch (HAMS) is of interest because it possesses unique functionalities and provides many health benefits for humans. Therefore, many high-amylose maize varieties have been developed via mutation or transgenic breeding approaches. From the literature reviewed, the fine structure of HAMS is different from the waxy and normal corn starches, influencing its gelatinization, retrogradation, solubility, swelling power, freeze-thaw stability, transparency, pasting and rheological properties, and even in vitro digestion. HAMS has undergone physical, chemical, and enzymatical modifications to enhance its characteristics and thereby broaden its possible uses. HAMS has also been used for the benefit of increasing resistant starch levels in food products. This review summarizes the recent developments in our understanding of the extraction and chemical composition, structure, physicochemical properties, digestibility, modifications, and industrial applications of HAMS.

Physicochemical, Structural, and Digestive Properties of Banana Starch Modified by Ultrasound and Resveratrol Treatments

Ultrasonic treatment combined with resveratrol modification was used to improve banana starch's solubility, thermal stability, and digestion resistance. The solubility and freeze-thaw stability of the modified starch complex significantly increased. The oil-absorption capacity increased by 20.52%, and the gelatinization temperatures increased from 64.10-73.92 °C to 70.77-75.83 °C. The storage modulus (G') and loss modulus (G″) increased after ultrasound and resveratrol treatment, and the proportion of viscosity was increased after composition with resveratrol. Additionally, the in vitro digestibility decreased from 44.12% to 40.25%. The modified complexes had release-control ability for resveratrol. X-ray diffraction (XRD) and Fourier transform infrared (FT-IR) spectroscopy demonstrated that complex structures became more compact and organized, whereas crystalline patterns were unchanged. Scanning electron microscopy (SEM) showed that the resveratrol modification caused physical change on the granular surface by creating pores and fissures. The findings can help develop antioxidant functional foods using banana starch.

Effect of dual modification with citric acid combined with ultrasonication on hydrolysis kinetics, morphology and structure of corn starch dispersions

Corn starch dispersions (CSD) were hydrolyzed with citric acid and compared with CSD co-treated with citric acid combined with ultrasonication for 1 to 18 days, which are designated as single modification (CSD-SM) and dual modification (CSD-DM), respectively. The logistic functions monitor the dynamics of the hydrolysis advance (%) of the CSD-SM and CSD-DM as a function of time, where the zones most vulnerable to the single-treatment and/or co-treatment of the corn starch granules (CSG) are the amorphous or disordered regions. The characterization results of CSD-DM suggest that the structural changes caused by dual modification affected the morphology, sequence, and microstructure of the CSG. The heterogeneous changes caused by the dual modification changed the configuration of the CSG, generating a kind of destemming of the amorphous lamellae (depolymerization), an increase in the percentage of relative crystallinity of the CSD-DM and an active rearrangement of the intralamellar chains that promoted the relative amount of double helix for 18 days of double modification. The synergistic effect of the dual modification for CSD by the sequential combination of a chemical treatment followed by a physical one improved the hydrolyzed advance by 12 %, the relative crystallinity by 10 %, and the promotion of double helices by 25 % during 18 days of co-treatment.

Impact of low-frequency ultrasound technology on physical, chemical and technological properties of cereals and pseudocereals

Cereals (CE) and pseudocereals (PSCE) play a pivotal role in nourishing the human population. Low-frequency ultrasound (LFUS) modifies the structure of CE and PSCE macromolecules such as starch and proteins, often improving their technological, functional and bioactive properties. Hence, it is employed for enhancing the traditional processes utilized for the preparation of CE- and PSCE-based foods as well as for the upcycling of their by-products. We report recent advances in LFUS treatments for hydration, germination, extraction of bioactive compounds from by-products, and fortification of CEs and PSCE, including kinetic modelling and underlying action mechanisms. Meta-analyses of LFUS influence on compounds extraction and starch gelatinization are also presented. LFUS enhances hydration rate and time lag phase of CE and PSCE, essential for germination, extraction, fermentation and cooking. The germination is improved by increasing hydration, releasing promoters and eliminating inhibitors. Furthermore, LFUS boosts the extraction of phenolic compounds, polysaccharides and other food components; modifies starch structure, affecting pasting properties; causes partial denaturation of proteins, improving their interfacial properties and their peptides availability. Overall, LFUS has an outstanding potential to improve transformation processes and functionalities of CE and PSCE.

Ultrasound based modification and structural-functional analysis of corn and cassava starch

In this study, the starch molecules were modified with ultrasonication at two different time intervals by using starch molecules from corn and cassava. This research aimed to examine the effect of the high power ultrasound of 40 kHz voltage and frequency with short time duration on structural and physical properties of corn and cassava starch. Morphology of ultrasonically treated starch granules was observed by scanning electron microscopy (SEM), FTIR, differential scanning calorimetry (DSC), and X-ray diffraction (XRD) and compared with untreated samples. After the ultrasound treatment groove and notch appeared on the surface of the starch granules. The results showed that gelatinization temperature did not change with ultrasound treatments, but enthalpy value decreased from 13.15 ± 0.25 J/g to 11.5 ± 0.29 J/g and 12.65 ± 0.32 J/g to 10.32 ± 0.26 J/g for sonicated corn and cassava starches, respectively. The XRD results revealed a slight decreased in the crystallinity degree (CD) of sonicated corn (25.3,25.1) and cassava starch (21.0,21.4) as compared to native corn (25.6%) and cassava starch (22.2%). This study suggests that non-thermal processing techniques have the potential to modify the starch from different sources and their applications due to starch's versatility, low cost, and comfort of use after processing with altered physicochemical properties.

Effects of carboxymethyl chitosan on physicochemical, rheological properties and in vitro digestibility of yam starch

The effects of carboxymethyl chitosan (CMCS) on the pasting, rheological, and physical properties of yam starch (YS) were investigated. Different concentrations of CMCS were added to the YS, followed by heating paste treatment at 95 °C. Then the blends were subjected to the determination of physicochemical, rheological properties and in vitro digestibility. Our results showed that CMCS reduced the paste viscosity of YS and the addition of CMCS did not effectively inhibit the movement of water molecules. Rheological measurements results showed that YS-CMCS blends exhibited shear thinning behavior. Furthermore, because of the presence of amylose inhibited the swelling of the starch and leaching of amylose, the addition of CMCS had no significant difference between solubility and swelling power of YS.

Structural and physicochemical characterization of modified starch from arrowhead tuber (Sagittaria sagittifolia L.) using tri-frequency power ultrasound

Sagittaria sagittifolia L. is a well-known plant, belongs to the Alismataceae family. Sonication can improve the functional properties of starch; hence, the aim of this study was to develop ultrasonically modified arrowhead starch (UMAS) using a sophisticated and eco-friendly tri-frequency power ultrasound (20/40/60 kHz) method at 300, 600, and 900 W for 15 and 30 min. Significant (p < 0.05) increases in swelling power, solubility, and water and oil holding capacities were achieved. FTIR spectroscopy corroborated the ordered, amorphous, and hydrated crystals of the sonicated samples. Increases in sonication frequency and power led to significant (p < 0.05) increases in onset gelatinization temperatures. Scanning electron microscopic analysis of sonicated samples showed superficial cracks and roughness on starch granules appeared in a sonication power-dependent manner compared with that of untreated sample. Overall, the ultrasonically-treated samples showed improved physicochemical properties, which could be useful for industrial applications.

Effect of dual modification sequence on physicochemical, pasting, rheological and digestibility properties of cassava starch modified by acetic acid and ultrasound

Dual modification of cassava starch was carried out using ultrasonication and acetylation by acetic acid by altering the sequence. The results revealed that the type of modification and sequence of modification for dual modified starches significantly affected the properties of starch. The swelling decreased for all the modified starches whereas solubility decreased for ultrasonicated starches but increased for acetylated starch and dual modified starch where acetylation was done after ultrasonication. The paste viscosities of all the modified starches were found to be significantly lower compared to native starch and the lowest viscosities were observed for dual modified starch where ultrasonication was done after acetylation. The resistant starch and slowly digestible starch content of the modified starches were significantly higher than in native starch, and the type of modification and sequence of modification for dual modified starches seemed to affect the digestibility of starches.

Isothermal and temperature-cycling retrogradation of high-amylose corn starch: Impact of sonication on its structural and retrogradation properties

In this study, the effects of sonication and temperature-cycled storage on the structural properties and resistant starch content of high-amylose corn starch were investigated. Sonication induced a partial depolymerization of the molecular structures of amylopectin and amylose. Sonication treatment induced the appropriate structural changes for retrogradation. Although the relative crystallinity of sonicated starch was lower than that of non-sonicated starch, sonicated starch after retrogradation showed much higher relative crystallinity than non-sonicated starch. Regardless of sonication treatment, temperature-cycled storage resulted in a higher degree of retrogradation than isothermal storage, but the rate of retrogradation was greater in sonicated starch than in non-sonicated starch, as supported by retrogradation enthalpy, the Avrami constant, and relative crystallinity. The highly developed crystalline structure in sonicated starches due to retrogradation was reflected by the large amount of resistant starch.

Development and Characterization of Physical Modified Pearl Millet Starch-Based Films

Pearl millet is an underutilized and drought-resistant crop that is mainly used for animal feed and fodder. Starch (70%) is the main constituent of the pearl millet grain; this starch may be a good substitute for major sources of starch such as corn, rice, potatoes, etc. Starch was isolated from pearl millet grains and modified with different physical treatments (heat-moisture (HMT), microwave (MT), and sonication treatment (ST)). The amylose content and swelling capacity of the starches decreased after HMT and MT, while the reverse was observed for ST. Transition temperatures (onset (To), peak of gelatinization (Tp), and conclusion (Tc)) of the starches ranged from 62.92-76.16 °C, 67.95-81.05 °C, and 73.78-84.50 °C, respectively. After modification (HMT, MT, and ST), an increase in the transition temperatures was observed. Peak-viscosity of the native starch was observed to be 995 mPa.s., which was higher than the starch modified with HMT and MT. Rheological characteristics (storage modulus (G') and loss modulus (G'')) of the native and modified starches differed from 1039 to 1730 Pa and 83 to 94 Pa; the largest value was found for starch treated with ST and HMT. SEM showed cracks and holes on granule surfaces after HMT as well as MT starch granules. Films were prepared using both native and modified starches. The modification of the starches with different treatments had a significant impact on the moisture, transmittance, and solubility of films. The findings of this study will provide a better understanding of the functional properties of pearl millet starch for its possible utilization in film formation.

Physicochemical properties and digestion mechanism of starch-linoleic acid complex induced by multi-frequency power ultrasound

The effects of multi-frequencies (mono: 20 kHz, 40 kHz, 60 kHz; dual: 20/40 kHz, 40/60 kHz, 20/60 kHz, and tri: 20/40/60 kHz) on physicochemical properties and in vitro digestibility of arrowhead starch-linoleic acid (AS-LA) complexes were evaluated. The complexing index and FTIR analyses showed that sonication treatment might be helpful in the formation of AS-LA complexes in an ultrasound frequency-dependent manner. The SEM micrographs revealed that the various ultrasonication frequencies caused dense network structure in AS-LA complexes. The XRD showed a V-type crystalline structure with increased crystallinity. Compared with arrowhead starch, a decrease in rapidly digestible starch , and an increase in resistant starch contents of AS-LA under various ultrasound frequencies was due to arrowhead starch and linoleic acid molecular interactions, which inhibited the further binding abilities. As a non-thermal technology, ultrasound could be effectively employed to prepare starch-lipid complexes with significant potential in functional foods and drug delivery systems.

Impact of thermo-sonication on quality indices of starch-based sauces

In this study, ultrasonication, a physical, relatively cheap, and environmentally benign technology, was investigated to characterize its effect on functional properties of rice starch and rice starch-based sauces. Temperature-assisted ultrasound treatment improved the granular swelling power, fat and water absorption capacities, and thermal properties of rice starch, signifying its suitability in the formulation of starch-based sauces. Rheological characterization of the formulated sauces revealed a shear-thinning flow behavior, well described by the Ostwald de Waele model, while viscoelastic properties showed the existence of a weak gel. Results indicated that ultrasonication significantly enhanced the pseudoplastic behavior of starch-based sauces. Additionally, textural analysis showed that textural attributes (stickiness, stringiness, and work of adhesion) were also improved with ultrasonication. Moreover, enhanced freeze/thaw stability was also achieved with ultrasound-treated starch-based sauces. Overall, the results from this study show that ultrasound-treated starches can be used in the formulation of sauces and potentially other food products, which meets the requirements for clean label and minimally processed foods.

Study on the structure and digestibility of high amylose Tartary buckwheat (Fagopyrum tataricum Gaertn.) starch-flavonoid prepared by different methods

Tartary buckwheat (Fagopyrum tataricum Gaertn.) is the only food rich in flavonoid bioactive substances in grains. Studies have shown that flavonoids interaction with amylose has an important impact on the physical and chemical properties and structure of starch. In this study, Tartary buckwheat was used as a raw material. It was then threshed with pullulanase, and a high amylose Tartary buckwheat starch flavonoid complex (HBS/BF) was prepared by physical mixing (PM), water bath treatment (WT), acid-base precipitation (AP), microwave treatment (MT), and ultrasonic treatment (UT); the physical and chemical properties were then evaluated. The results show that HBS/BF-UT and HBS/BF-MT have a higher iodine binding rate than HBS/BF-PM; X-ray diffraction results show that HBS/BF-AP has a V-type crystal form, but the relative crystallinity was reduced. Fourier infrared spectroscopy showed that there is no new covalent bond between Tartary buckwheat starch and flavonoids. In vitro digestion showed that adding flavonoid significantly increased the digestibility of Tartary buckwheat starch. PRACTICAL APPLICATION: These results will provide a theoretical basis for further starch anti-digestion mechanisms and the preparation of resistant starch. These steps will provide insights into the application of Tartary buckwheat starch and flavonoids in the food industry.

Clean label starch: production, physicochemical characteristics, and industrial applications

Recently, health-conscious consumers have a tendency to avoid the use of modified starch in their food products because of reluctance regarding food additives or chemical processes. The present paper considers the characteristics and manufacturing methods of clean label starch, which is free from chemical modification. Clean label starch manufacturing is mainly dependent on starch blending, physical and enzymatic modification methods. Physical modifications include ultrasound, hydrothermal (e.g., heat-moisture treatment and annealing), pre-gelatinization (e.g., drum drying, roll drying, spray cooking, and extrusion cooking), high-pressure (high hydrostatic pressure), and pulsed electric field treatments. These physical processes allow variation of starch properties, such as morphological, thermal, rheological, and pasting properties. Enzyme treatment can change the properties of starch more dramatically. Actual use of clean label starch with such altered properties has occurred in industry and is described here. This review may provide useful information on the current status and future direction of clean label starch in the field of food science.

Effects of ultrasound treatment on the starch properties and oil absorption of potato chips

As a non-thermal processing method, the ultrasound treatment prior to the frying process has been demonstrated with great potential in reducing the oil absorption of fried food. This research aimed to evaluate the effect of ultrasound pretreatment on starch properties, water status, pore characteristics, and the oil absorption of potato slices. Ultrasound probe set with two power (360 W and 600 W) at the frequency of 20 kHz for 60 min was applied to perform the pretreatments. The results showed that ultrasound pretreatment led to the surface erosion of starch granules and higher power made the structure of starch disorganized. Moreover, the fraction of bound water and immobilized water were changed after ultrasonic pretreatment. Pores with the minor diameters (0.4-3 μm and 7-12 μm) were formed after ultrasound pretreatment. The penetrated surface oil (PSO) content, and structure oil (STO) content were reduced by 27.31% and 22.25% respectively with lower power ultrasound pretreatment. As the ultrasound power increased, the surface oil (SO) content and PSO content increased by 25.34% and 12.89% respectively, while STO content decreased by 38.05%. By using ultrasonic prior to frying, the quality of potato chips has been greatly improved.

Effects of ultrasound-assisted enzyme hydrolysis on the microstructure and physicochemical properties of okara fibers

This work focuses on the effects of different ultrasound power densities on the microstructural changes and physicochemical properties of okara fibers, which are composed of carbohydrate-based polymers. Okara suspensions were treated with ultrasound at different power densities (0, 1, 2, 3, 4, and 5 W/mL) for 30 min, after which the ultrasound-treated okara were hydrolyzed by trypsin to obtain okara fibers. The ultrasound treatment of the okara fibers induced structural disorganization and changes, evidenced mainly in their morphological characteristics and their relative crystallinity degrees. Increasing the ultrasound power broke the okara fibers into flaky and stacked structures. When the ultrasound power density reached 4 W/mL, the parenchyma became compact and the hourglass structure fractured. The mean particle size of the okara fiber was reduced from 82.24 µm to 53.96 µm, and the homogeneity was enhanced significantly. The relative crystallinity of the okara fibers was reduced from 55.14% to 36.47%. The okara fiber surface charge decreased when the ultrasound power was increased. However, after ultrasound treatment at 4 W/mL (800 W), the okara fiber suspension exhibited the highest viscosity value and a higher swelling capacity, water-holding capacity, and oil-holding capacity. Therefore, the results indicated that the selection of processing conditions for okara fibers is critical and that okara fiber modification using a high ultrasound treatment might improve their use in potential applications.