Analytical methods to analyze pesticides and herbicides

Surface-enhanced Raman scattering enhancement using a hybrid gold nanoparticles@carbon nanodot substrate for herbicide detection

The widespread distribution of herbicides in the environment poses a significant risk to human health and wildlife. Surface-enhanced Raman scattering (SERS) has emerged as a powerful technique for detecting and analyzing herbicides. However, developing a low-cost, highly sensitive, reproducible, stable, and Raman-active nanostructured substrate for herbicide detection remains a particular challenge. In this research, a nanohybrid substrate consisting of gold nanoparticles@carbon nanodots (AuNPs@CNDs) was synthesized by reducing HAuCl4 in the presence of CNDs at 100 °C. The optical, chemical, and physical properties of CNDs, AuNPs, and the hybrid AuNPs@CND substrates were thoroughly investigated using various techniques including UV-vis spectrometry, Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and CytoViva darkfield and hyperspectral imaging. The SERS effect of the substrates was evaluated using rhodamine 6G (Rh6G), a Raman-active probe, and two groups of herbicides containing mesotrione or S-metolachlor. The results demonstrated a significant signal amplification in the SERS spectra of Rh6G and herbicide molecule detection using the AuNPs@CND substrate compared to bare CNDs and AuNPs alone. This suggests that the nanohybrid AuNPs@CND SERS substrate holds promise for the detection of herbicides and other organic compounds in environmental applications.

Are the issues involving acephate already resolved? A scientometric review

Acephate is a pesticide classified as moderately toxic, and its metabolite methamidophos is highly toxic for mammals and birds; even so, it is one of the most used insecticides in pest control for agricultural and domestic use. Acephate toxicity affects both target and non-target organisms and causes serious damage to the environment. There are several studies on different perspectives of acephate, such as monitoring, toxicity, and modeling. In this sense, this research aims to identify the structure of intellectual production on acephate and analyze the gaps and trends of scientific production on acephate through a scientometric analysis. The data was obtained from the Web of Science database, and after the refinement, 1.085 documents were used. A temporal pattern of the main research objectives is displayed. Most selected studies evaluated acephate efficiency, followed by toxicity and residue detection methods. The USA, China, India, Brazil, and Japan had the highest number of publications on acephate. The keywords most utilized were pesticides, toxicity, insecticide resistance, and residue. Research involving acephate requires greater attention from areas such as ecotoxicology, biochemistry, genetics, and biotechnology. There needed to be more discussions on chronic toxicity, genotoxicity, and cytotoxicity. Moreover, few studies about metabolic and biochemical pathways and genes related to acephate action and biodegradation were scarce.

Contamination of herbal medicinal products in low-and-middle-income countries: A systematic review

The use of herbal medicinal products (HMPs) has grown significantly across low-and-middle-income countries (LMICs). Consequently, the safety of these products due to contamination is a significant public health concern. This systematic review aimed to determine the prevalence, types, and levels of contaminants in HMPs from LMICs. A search was performed in seven online databases, i.e., Africa journal online (AJOL), Cumulative Index to Nursing and Allied Health Literature (CINAHL), Directory of Open Access Journals (DOAJ), Health Inter-Network Access to Research Initiative (HINARI), World Health Organization Global Index Medicus (WHO GIM), Scopus, and PubMed using appropriate search queries and reported as per the "Preferred Reporting Items for Systematic Reviews and Meta-Analyses" (PRISMA) guidelines. Ninety-one peer-reviewed articles published from 1982 to 2021 from 28 different countries across four continents were included in the study. Although metals, microbial, mycotoxins, pesticides, and residual solvents were the reported contaminants in the 91 articles, metals (56.0%, 51/91), microbial (27.5%, 25/91), and mycotoxins (18.7%, 17/91) were the most predominant. About 16.4% (1236/7518) of the samples had their contaminant levels above the regulatory limits. Samples tested for microbial contaminants had the highest proportion (46.4%, 482/1039) of contaminants exceeding the regulatory limit, followed by mycotoxins (25.8%, 109/423) and metals (14.3%, 591/4128). The proportion of samples that had their average non-essential metal contaminant levels above the regulatory limit was (57.6%, 377/655), 18.3% (88/480), 10.7% (24/225), and 11.3% (29/257) for Pb, Cd, Hg, and As, respectively. The commonest bacteria species found were Escherichia coli (52.3%, 10/19) and Salmonella species (42.1%, 8/19). This review reported that almost 90% of Candida albicans and more than 80% of moulds exceeded the required regulatory limits. HMP consumption poses profound health implications to consumers and patients. Therefore, designing and/or implementing policies that effectively regulate HMPs to minimize the health hazards related to their consumption while improving the quality of life of persons living in LMICs are urgently needed.

Determination of quizalofop-p-ethyl in onion: residual dissipation pattern, weed control efficiency, and food safety assessment under field conditions

Monitoring pesticide residue levels becomes crucial to maintain quality and guarantee food safety as the consumption of onion green leaves and immature and mature bulbs (either raw or processed) rises. A field experiment was conducted for two consecutive seasons with quizalofop-p-ethyl (5% EC) at 50 and 100 g a.i. ha-1 to evaluate weed control efficiency and to determine terminal residues. Post-emergence application of fop herbicide at 100 g a.i. ha-1 kept the weed density and dry weight reasonably at a lower level and enhanced the productivity of onion with higher economic returns. A rapid, sensitive, and analytical method was developed using high-performance liquid chromatography (HPLC) with excellent linearity (r2 > 0.99). The limit of quantification for quizalofop-p-ethyl was established at 0.04 mg kg-1 with signal to noise (S/N) ratio ≥ 10. The method was successfully applied and initial quantified residues were in the range of 2.5-4.4 mg kg-1 irrespective of seasons and doses. Finally, the presence of targeted herbicide residues in harvested samples was confirmed by liquid chromatography tandem mass spectrometry (LC-MS/MS) under optimized operating conditions. Dietary risk assessment assured harvested onions were safe for consumption at the recommended dose. It also can be concluded that quizalofop ethyl did not adversely influence soil micro-organisms at standard rates of application.

Toxicity monitoring signals analysis of selenite using microbial fuel cells

Microbial fuel cells (MFCs) based biosensors are widely studied to environmental monitoring. The suitable responsive signal is important for microbial electrochemical sensors. However, the responsive signals of toxins have not been investigated in detail. Using sodium selenite as a toxic substance, the different response signals are analyzed over a concentration range from 0 to 150 mg/L in the double chambered. The output voltage and power density had the opposite trend between 0 and 2.5 mg/L and 2.5-150 mg/L. To analyze the reasonable signal of Se(IV) monitoring sensor, correlation analysis of concentrations and responsive signal data (maximum voltage, maximum power density, coulombic recovery, coulombic efficiency, and normalized energy recovery, etc.) has been accomplished. The high concentration of exogenous selenite (2.5-100 mg/L) is negatively correlated with maximum voltage (r = -0.901, p < 0.01) and max power density (r = -0.910, p < 0.01). The low concentration of exogenous selenite is positively correlated with average voltage, max power density, coulombic yield (r = 0.973, 0.999 and 0.975, respectively. p < 0.05). Furthermore, Illumina sequencing results indicate that the addition of sodium selenite solution changes the anode community structure, thereby affecting the removal efficiency of organic matter, which may be the reason why coulombic efficiency and normalized energy recovery are not suitable as sensing signal. Overall, based on the analysis of experimental data, the maximum power density is the best response signal, which provides a reference for the selection of sensor response signal based on microbial fuel cells.

Synthesis and application of new silver and sulfur decorated S-doped reduced graphene oxide in ultra-trace analysis of pesticides by ion mobility spectrometry

In this research study, a novel, facile, and affordable method is presented for the synthesis of a Ag/S/S-RGO nanocomposite. The resulting new nanocomposite was identified by FT-IR, XRD, FESEM, XPS, BET and EDX and employed as a rapid and effective adsorbent with acceptable absorption capacity for the analysis of various pesticides by dispersive solid-phase microextraction combined with ion mobility spectrometry. The main experimental parameters of the method were optimized such as the type of desorption solvent, pH of the sample solution, type of buffer, amount of the sorbent (Ag/S/S-RGO), sorption/desorption time, etc. Under the optimized conditions, linear dynamic ranges of 0.5-110.0, 1.0-110.0, and 0.8-90.0 ng mL^-1 were achieved, with limits of detection of 0.25, 0.35, and 0.25 ng mL^-1 for simazine, alachlor, and haloxyfop, respectively. The relative standard deviations (RSD%) were obtained as <5.0%. Eventually, the method was utilized for the simultaneous determination of simazine, alachlor, and haloxyfop in environmental and agricultural samples with recoveries between 95.0 and 104.6%.

Occurrence and fate of pharmaceuticals, personal care products (PPCPs) and pesticides in African water systems: A need for timely intervention

The occurrence of emerging contaminants (ECs) such as pharmaceuticals, personal care products (PPCPs) and pesticides in the aquatic environment has raised serious concerns about their adverse effects on aquatic species and humans. Because of their toxicity and bioactive nature, PPCPs and pesticides have more potential to impair water systems than any other contaminants, causing several adverse effects, including antibiotic resistance, reproductive impairment, biomagnification, bioaccumulation, etc. Over 35 publications from Africa have reported on the occurrence and fate of PPCPs and pesticides in African water systems with little or no data on remediation and control. As a result, adequate intervention strategies are needed for regulating the persistence of PPCPs and pesticides in African water systems.

Analytical Evaluation of Carbamate and Organophosphate Pesticides in Human and Environmental Matrices: A Review

Pesticides are synthetic compounds that may become environmental contaminants through their use and application. The high productivity achieved in the agricultural industry can be credited to the use and application of pesticides by way of pest and insect control. As much as pesticides have a positive impact on the agricultural industry, some disadvantages come with their application in the environment because they are intentionally toxic, and this is more towards non-target organisms. They are grouped into chlorophenols, organochlorines, synthetic pyrethroid, carbamates, and organophosphorus based on their structure. The symptoms of exposure to carbamate (CM) and organophosphates (OP) are similar, although poisoning from CM is of a shorter duration. The analytical evaluation of carbamate and organophosphate pesticides in human and environmental matrices are reviewed using suitable extraction and analytical methods.

Experimental and theoretical vibrational study of the fungicide pyraclostrobin

The vibrational study of the pyraclostrobin (methyl N-(2-{[1-(4-chlorophenyl)-1H-pyrazol-3-yl]oxymethyl}phenyl) N-methoxycarbamate) molecule, a synthetic fungicide for agricultural uses, was performed. Pyraclostrobin belongs to the strobilurin family and acts by inhibiting the fungus respiratory chain at the level of Complex III, becoming an excellent agent for preventive, curative and eradicative activities against a wide range of fungal plant pathogens. However, its presence needs to be monitored to avoid the excessive and/or improper use that may compromise human or environmental health. The FTIR and Raman spectra of pyraclostrobin in pure solid state were recorded and compared with those obtained from both the substance in CH₂Cl₂ solution and in an agricultural commercial product (Comet® BASF). The spectral analysis was complemented with quantum-chemical calculations at the DFT level (B3LYP/6-311G*) for the predictions of the molecular geometry and its vibrational behavior. The high flexibility of the molecule was explored by performing potential energy scans on several dihedral angles and the results suggested that the main conformer of pyraclostrobin is that possessing the ortho-substituted benzene ring in perpendicular orientation regarding the plane that contains the ether group and the pyrazole ring, although the presence of a second preferred conformation in the experimental vibrational spectra was not ruled out. Among the many vibrational bands of pyraclostrobin that were well identified in the spectrum of the composite product for agricultural use, the one located at 936 cm^-1 stood out. This signal was assigned to a vibration of the pyrazole ring and promised to be a good candidate as marker of the presence of the fungicide in complex matrixes.

Design of bioluminescent biosensors for assessing contamination of complex matrices

The presence of potentially toxic xenobiotics in complex matrices has become rather the rule than the exception. Therefore, there is a need for highly sensitive inexpensive techniques for analyzing environmental and food matrices for toxicants. Enzymes are selectively sensitive to various toxic compounds, and, thus, they can be used as the basis for detection of contaminants in complex matrices. There are, however, a number of difficulties associated with the analysis of complex matrices using enzyme assays, including the necessity to take into account properties and effects of the natural components of the test media for accurate interpretation of results. The present study describes the six-stage procedure for designing new enzyme sensors intended for assessing the quality of complex matrices. This procedure should be followed both to achieve the highest possible sensitivity of the biosensor to potentially toxic substances and to minimize the effect of the uncontaminated components of complex mixtures on the activity of the biosensor. The proposed strategy has been tested in designing a bioluminescent biosensor for integrated rapid assessment of the safety of fruits and vegetables. The biosensor is based on the coupled enzyme system NAD(P)H:FMN-oxidoreductase and luciferase as the biorecognition element. The study describes methods and techniques for attaining the desired result in each stage. The proposed six-stage procedure for designing bioluminescent enzyme biosensors can be used to design the enzymatic biosensors based on other enzymes.

Immunoassay-based approaches for development of screening of chlorpyrifos

Chlorpyrifos (CPF) is an extensively used organophosphate pesticide for crop protection. However, there are concerns of it contaminating the environment and human health with estimated three lakh deaths annually. Detection of CPF in blood samples holds significance to avoid severe health outcomes due to continuous exposure. The most common techniques for CPF detection are Gas chromatography (GC) and high-performance liquid chromatography (HPLC). However, these techniques might not be feasible at the community healthcare level due to high-cost instrumentation, time-consuming sample preparation protocol and skilled analysts. Therefore, rapid, effective and economical methods such as immunoassay would be imperative for CPF detection in biological samples. The vital step in immunoassay development is the design of a potent immunogen from non-immunogenic molecules. The molecular modelling protocol could assist in redesigning known CPF linkers and inserting them at different substitutable positions of CPF to get distinctive CPF derivatives. Molecular docking and binding free energy analysis can be used to identify the CPF derivatives having a better binding affinity with carrier protein compared to CPF. The top-ranked CPF derivatives based on docking score and binding energy could be ideal for synthesis and immunogen development. The present review will comprehend technological trends in immunoassay kits for detecting chlorpyrifos from biological samples.

The Potential Use of a Thin Film Gold Electrode Modified with Laccases for the Electrochemical Detection of Pyrethroid Metabolite 3-Phenoxybenzaldehyde

There is increasing interest in developing portable technologies to detect human health threats through hybrid materials that integrate specific bioreceptors. This work proposes an electrochemical approach for detecting 3-Phenoxybenzaldehyde (3-PBD), a biomarker for monitoring human exposure to pyrethroid pesticides. The biosensor uses laccase enzymes as an alternative recognition element by direct oxidation of 3-PBD catalysts by the enzyme onto thin-film gold electrodes. The thin-film gold electrode modified by the immobilized laccase was characterized by Fourier-transform infrared spectrometry and scanning electron microscopy. The detection method’s electrochemical parameters were established, obtaining a linear range of 5 t 50 μM, the limit of detection, and quantification of 0.061 and 2.02 μM, respectively. The proposed biosensor’s analytical performance meets the concentration of pyrethroids detected in natural environments, reflecting its potential as an alternative analytical tool for monitoring the pyrethroid insecticide’s presence.

Clinical utility of validated gas chromatography-ion trap mass spectrometry in patients with anticholinesterase pesticides poisoning

Intentional or unintentional intake of anticholinesterase pesticides became common due to their extensive use in agricultural and domestic purposes, resulting in numerous poisoning cases. A simple, accurate, and sensitive gas chromatography-ion trap mass spectrometry-based method for the quantification of 12 anticholinesterase pesticides (monocrotophos, dimethoate, dichlorvos, azinphos-methyl, carbofuran, chlorpyrifos, dialifos, diazinon, malathion, parathion, methidathion, and terbufos) in serum was developed, and its utility in patients with alleged pesticides poisoning was assessed. The quantification was performed using liquid-liquid extraction by toluene/chloroform (4:1,v/v) with 500 μL of serum. On column limit of detection and limit of quantification were less than 50.00 μg/L. The recovery ranged from 97.54 to 103.23%. The calibration curves were linear (R² > 0.9937). Accuracy was found to be between - 7.1 and 7.2%. Intra-day and inter-day reproducibility was less than 17% for the spiked quality control serum samples. The level of pesticide in serum quantified by the validated method correlated with clinical signs and symptoms, pseudo-cholinesterase activity, total atropine dose, length of hospital stay, and clinical outcome in 15 patients with alleged pesticide poisoning. The validated method may be used for monitoring and prognosis in patients with pesticide poisoning and diagnosis of poisoning in forensic toxicology.

Food safety and quality assessment: comprehensive review and recent trends in the applications of ion mobility spectrometry (IMS)

Ion mobility spectrometry (IMS) is an analytical separation and diagnostic technique that is simple and sensitive and a rapid response and low-priced technique for detecting trace levels of chemical compounds in different matrices. Chemical agents and environmental contaminants are successfully detected by IMS and have been recently considered to employ in food safety. In addition, IMS uses stand-alone or coupled analytical diagnostic tools with chromatographic and spectroscopic methods. Scientific publications show that IMS has been applied 21% in the pharmaceutical industry, 9% in environmental studies and 13% in quality control and food safety. Nevertheless, applications of IMS in food safety and quality analysis have not been adequately explored. This review presents the IMS-related analysis and focuses on the application of IMS in food safety and quality. This review presents the important topics including detection of traces of chemicals, rate of food spoilage and freshness, food adulteration and authenticity as well as natural toxins, pesticides, herbicides, fungicides, veterinary, and growth promoter drug residues. Further, persistent organic pollutants (POPs), acrylamide, polycyclic aromatic hydrocarbon (PAH), biogenic amines, nitrosamine, furfural, phenolic compounds, heavy metals, food packaging materials, melamine, and food additives were also examined for the first time. Therefore, it is logical to predict that the application of the IMS technique in food safety, food quality, and contaminant analysis will be impressively increased in the future. HighlightsCurrent status of IMS for residues and contaminant detection in food safety.To assess all the detected contaminants in food safety, for the first time.Identified IMS-related parameters and chemical compounds in food safety control.

Electrochemical sensing base for hazardous herbicide aclonifen using gadolinium niobate (GdNbO4) nanoparticles-actual river water and soil sample analysis

The present work scrutinized the voltammetric analysis of hazardous herbicide aclonifen (ACF) in actual soil and river water samples utilizing the electrochemical method. The electrochemical sensing device was fabricated for the determination of ACF using gadolinium niobate (GdNbO₄) nanoparticles modified glassy carbon electrode (GCE). The novel GdNbO₄ sensing material was prepared via a simple co-precipitation method. Several characterization techniques (TEM, EDS, XRD, XPS, and BET) were utilized to analyze the structural features of the GdNbO₄. The enhanced electrochemical behavior of GdNbO₄ modified GCE towards ACF was observed compared to bare GCE. The cyclic voltammetry response revealed that the prepared sensor shows the lower negative potential with a dramatic increase in the peak current of ACF compared to bare GCE. In the differential pulse voltammetry, the limit of detection (1.15 nM) and sensitivity (23 μA μM^-1 cm^-2) of the ACF on the GdNbO₄ modified GCE was comparatively superior to the formerly proposed ACF based sensor. This sensor reveals good selectivity, repeatability, reproducibility, and long-term stability. The reliability of the sensor exhibits satisfactory recovery results for ACF detection in river water and soil samples.