Time-resolved fluorescence microscopy could correct for probe binding while estimating intracellular pH

Measurement of pH micro-heterogeneity in natural cheese matrices by fluorescence lifetime imaging

Cheese, a product of microbial fermentation may be defined as a protein matrix entrapping fat, moisture, minerals and solutes as well as dispersed bacterial colonies. The growth and physiology of bacterial cells in these colonies may be influenced by the microenvironment around the colony, or alternatively the cells within the colony may modify the microenvironment (e.g., pH, redox potential) due to their metabolic activity. While cheese pH may be measured at macro level there remains a significant knowledge gap relating to the degree of micro-heterogeneity of pH within the cheese matrix and its relationship with microbial, enzymatic and physiochemical parameters and ultimately with cheese quality, consistency and ripening patterns. The pH of cheese samples was monitored both at macroscopic scale and at microscopic scale, using a non-destructive microscopic technique employing C-SNARF-4 and Oregon Green 488 fluorescent probes. The objectives of this work were to evaluate the suitability of these dyes for microscale pH measurements in natural cheese matrices and to enhance the sensitivity and extend the useful pH range of these probes using fluorescence lifetime imaging (FLIM). In particular, fluorescence lifetime of Oregon Green 488 proved to be sensitive probe to map pH micro heterogeneity within cheese matrices. Good agreement was observed between macroscopic scale pH measurement by FLIM and by traditional pH methods, but in addition considerable localized microheterogeneity in pH was evident within the curd matrix with pH range between 4.0 and 5.5. This technique provides significant potential to further investigate the relationship between cheese matrix physico-chemistry and bacterial metabolism during cheese manufacture and ripening.

Spectroscopic microscopy analysis of the interior pH of individual phospholipid vesicles

The use of phospholipid vesicles as reaction containers, as vehicles for pharmaceutical drug delivery, and as model systems for cells has prompted the development of new methods for analyzing the structure of vesicles and their contents. The pH of the interior of vesicles is of particular interest when analytes are encapsulated and concentrated with the use of a pH gradient. While the interior pH is generally measured for large populations of vesicles, we report the measurement of the interior pH of individual vesicles as their buffer contents are titrated by transfer of N-methylbutylamine (NMBA) into the vesicle by a pH gradient. The initially acidic buffer within the vesicles is titrated along with a small concentration of an encapsulated pH sensitive dye, 5,6-carboxy SNARF-1-dextran. Images of the indicator fluorescence from each vesicle and its dispersed fluorescence spectrum are recorded using epi-illumination spectral fluorescence microscopy. From a fit of the spectra to the respective acid and base forms of the fluorescent indicator, the interior pH of individual vesicles as a function of the concentration of the NMBA titrant in the external solution could be determined.

Substrate catalysis enhances single-enzyme diffusion

We show that diffusion of single urease enzyme molecules increases in the presence of urea in a concentration-dependent manner and calculate the force responsible for this increase. Urease diffusion measured using fluorescence correlation spectroscopy increased by 16-28% over buffer controls at urea concentrations ranging from 0.001 to 1 M. This increase was significantly attenuated when urease was inhibited with pyrocatechol, demonstrating that the increase in diffusion was the result of enzyme catalysis of urea. Local molecular pH changes as measured using the pH-dependent fluorescence lifetime of SNARF-1 conjugated to urease were not sufficient to explain the increase in diffusion. Thus, a force generated by self-electrophoresis remains the most plausible explanation. This force, evaluated using Brownian dynamics simulations, was 12 pN per reaction turnover. These measurements demonstrate force generation by a single enzyme molecule and lay the foundation for a further understanding of biological force generation and the development of enzyme-driven nanomotors.

pH- and DNA-induced dual molecular light switches based on a novel ruthenium(II) complex

A novel Ru(II) complex, [Ru(bpy)(2)(btppz)]Cl(2), where bpy=2,2'-bipyridine and btppz=benzo[h]tripyrido[3,2-a:2',3'-c:2'',3''-j]phenazine, has been synthesized and characterized. The pH effects on UV-visible (UV-vis) absorption and emission spectra of the complex have been studied and ground- and excited-state ionization constants of the complex have been derived. The calf thymus DNA (ct-DNA) binding properties of the complex were investigated with UV-vis absorption and luminescence spectrophotometric titrations, steady-state emission quenching by [Fe(CN)(6)](4-), DNA competitive binding with ethidium bromide, DNA melting experiments, reverse salt titrations and viscosity measurements. The complex was demonstrated to act as dual molecular switches: pH-induced "on-off" emission switch with an on-off intensity ratio of approximately 54 which is favorably compared with those reported for structurally analogous Ru(II) complexes, and a DNA molecular light switch with a luminescence enhancement factor of 22 as it intercalatively bound to the DNA.

Regulation of microtubule dynamic instability in vitro by differentially phosphorylated stathmin

Stathmin is an important regulator of microtubule polymerization and dynamics. When unphosphorylated it destabilizes microtubules in two ways, by reducing the microtubule polymer mass through sequestration of soluble tubulin into an assembly-incompetent T2S complex (two alpha:beta tubulin dimers per molecule of stathmin), and by increasing the switching frequency (catastrophe frequency) from growth to shortening at plus and minus ends by binding directly to the microtubules. Phosphorylation of stathmin on one or more of its four serine residues (Ser(16), Ser(25), Ser(38), and Ser(63)) reduces its microtubule-destabilizing activity. However, the effects of phosphorylation of the individual serine residues of stathmin on microtubule dynamic instability have not been investigated systematically. Here we analyzed the effects of stathmin singly phosphorylated at Ser(16) or Ser(63), and doubly phosphorylated at Ser(25) and Ser(38), on its ability to modulate microtubule dynamic instability at steady-state in vitro. Phosphorylation at either Ser(16) or Ser(63) strongly reduced or abolished the ability of stathmin to bind to and sequester soluble tubulin and its ability to act as a catastrophe factor by directly binding to the microtubules. In contrast, double phosphorylation of Ser(25) and Ser(38) did not affect the binding of stathmin to tubulin or microtubules or its catastrophe-promoting activity. Our results indicate that the effects of stathmin on dynamic instability are strongly but differently attenuated by phosphorylation at Ser(16) and Ser(63) and support the hypothesis that selective targeting by Ser(16)-specific or Ser(63)-specific kinases provides complimentary mechanisms for regulating microtubule function.

Assessing the sensitivity of commercially available fluorophores to the intracellular environment

The use of fluorescence has become commonplace in the biological sciences, with many studies utilizing probes based on commercially available fluorophores to provide insight into cell function and behavior. As these imaging applications become more advanced, it becomes increasingly important to acquire accurate quantitative measurements of the fluorescence signal. Absolute quantification of fluorescence, however, requires the fluorophores themselves to be insensitive to environmental factors such as nonspecific protein interactions and pH. Here, we present a method for characterizing the sensitivity of fluorophores to the cytosolic environment by comparing their fluorescent intensity to an environment-insensitive reference signal before and after intracellular delivery. Results indicated that although the fluorescent intensity of a few fluorophores, e.g., fluorescein, were highly susceptible to the intracellular environment, other fluorophores, e.g., Dylight 649, Alexa647, and Alexa750, were insensitive to the intracellular environment. It was also observed that the sensitivity of the fluorophore could be dependent on the biomolecule to which it was attached. In addition to assessing the environmental sensitivity of fluorophores, a method for quantifying the amount of fluorophores within living cells is also introduced. Overall, the present study provides a means to select fluorophores for studies that require an absolute quantification of fluorescence in the intracellular environment.

Vacuolar-type H+-ATPases at the plasma membrane regulate pH and cell migration in microvascular endothelial cells

Microvascular endothelial cells involved in angiogenesis are exposed to an acidic environment that is not conducive for growth and survival. These cells must exhibit a dynamic intracellular (cytosolic) pH (pHcyt) regulatory mechanism to cope with acidosis, in addition to the ubiquitous Na+/H+exchanger and HCO3−-based H+-transporting systems. We hypothesize that the presence of plasmalemmal vacuolar-type proton ATPases (pmV-ATPases) allows microvascular endothelial cells to better cope with this acidic environment and that pmV-ATPases are required for cell migration. This study indicates that microvascular endothelial cells, which are more migratory than macrovascular endothelial cells, express pmV-ATPases. Spectral imaging microscopy indicates a more alkaline pHcytat the leading than at the lagging edge of microvascular endothelial cells. Treatment of microvascular endothelial cells with V-ATPase inhibitors decreases the proton fluxes via pmV-ATPases and cell migration. These data suggest that pmV-ATPases are essential for pHcytregulation and cell migration in microvascular endothelial cells.

Stathmin Strongly Increases the Minus End Catastrophe Frequency and Induces Rapid Treadmilling of Bovine Brain Microtubules at Steady State in Vitro

Stathmin is a ubiquitous microtubule destabilizing protein that is believed to play an important role linking cell signaling to the regulation of microtubule dynamics. Here we show that stathmin strongly destabilizes microtubule minus ends in vitro at steady state, conditions in which the soluble tubulin and microtubule levels remain constant. Stathmin increased the minus end catastrophe frequency approximately 13-fold at a stathmin:tubulin molar ratio of 1:5. Stathmin steady-state catastrophe-promoting activity was considerably stronger at the minus ends than at the plus ends. Consistent with its ability to destabilize minus ends, stathmin strongly increased the treadmilling rate of bovine brain microtubules. By immunofluorescence microscopy, we also found that stathmin binds to purified microtubules along their lengths in vitro. Co-sedimentation of purified microtubules polymerized in the presence of a 1:5 initial molar ratio of stathmin to tubulin yielded a binding stoichiometry of 1 mol of stathmin per approximately 14.7 mol of tubulin in the microtubules. The results firmly establish that stathmin can increase the steady-state catastrophe frequency by a direct action on microtubules, and furthermore, they indicate that an important regulatory action of stathmin in cells may be to destabilize microtubule minus ends.

Spectral imaging microscopy demonstrates cytoplasmic pH oscillations in glial cells

Glial cells exhibit distinct cellular domains, somata, and filopodia. Thus the cytoplasmic pH (pH(cyt)) and/or the behavior of the fluorescent ion indicator might be different in these cellular domains because of distinct microenvironments. To address these issues, we loaded C6 glial cells with carboxyseminaphthorhodafluor (SNARF)-1 and evaluated pH(cyt) using spectral imaging microscopy. This approach allowed us to study pH(cyt) in discrete cellular domains with high temporal, spatial, and spectral resolution. Because there are differences in the cell microenvironment that may affect the behavior of SNARF-1, we performed in situ titrations in discrete cellular regions of single cells encompassing the somata and filopodia. The in situ titration parameters apparent acid-base dissociation constant (pK'(a)), maximum ratio (R(max)), and minimum ratio (R(min)) had a mean coefficient of variation approximately six times greater than those measured in vitro. Therefore, the individual in situ titration parameters obtained from specific cellular domains were used to estimate the pH(cyt) of each region. These studies indicated that glial cells exhibit pH(cyt) heterogeneities and pH(cyt) oscillations in both the absence and presence of physiological HCO(3)(-). The amplitude and frequency of the pH(cyt) oscillations were affected by alkalosis, by acidosis, and by inhibitors of the ubiquitous Na(+)/H(+) exchanger- and HCO(3)(-)-based H(+)-transporting mechanisms. Optical imaging approaches used in conjunction with BCECF as a pH probe corroborated the existence of pH(cyt) oscillations in glial cells.

Carboxy SNARF-4F as a Fluorescent pH Probe for Ensemble and Fluorescence Correlation Spectroscopies

The optical spectroscopic properties of 1,4(and 5)-benzenedicarboxylic acid, 2-[10-(dimethylamino)-4-fluoro-3-oxo-3H-benzo[c]xanthen-7-yl] (carboxy SNARF-4F), a commercial promising fluorescent pH probe, are investigated in buffered aqueous solutions in the 5.6-8.2 pH range by steady-state and time-resolved spectroscopy. A multiexponential global analysis of the picosecond time-resolved data is performed. The nonprotonated A species decays monoexponentially (0.73 ns), while the protonated species AH decays following a biexponential law with time constants of 0.40 and 1.87 ns. A kinetic scheme is proposed to explain the observations, which involves AH in equilibrium with a species denoted Y. The nature of Y is discussed in terms of a possible structural change in the molecule producing the lactone form, although the formation of a hydrogen-bonded complex to the solvent cannot be ruled out. Finally, the ability of the dye to probe pH at the single-molecule level is explored using fluorescence correlation spectroscopy.

Fluorescence lifetime-resolved pH imaging of living cells

BACKGROUND

The regulation and maintenance of intracellular pH are critical to diverse metabolic functions of the living cells. Fluorescence time-resolved techniques and instrumentations have advanced rapidly and enabled the imaging of intracellular pH based on the fluorescence lifetimes.

METHODS

The frequency-domain fluorescence lifetime imaging microscopy (FLIM) and fluorophores displaying appropriate pH-dependent lifetime sensitivities were used to determine the temporal and spatial pH distributions in the cytosol and vesicular compartment lysosomes.

RESULTS

We found that cytosolic pH levels are different in 3T3 fibroblasts, Chinese hamster ovary (CHO) cells, and MCF-7 cells when using the pH probe carboxy-SNAFL2. We also tracked the transient cytosolic pH changes in the living CHO cells after treatments with proton pump inhibitors, ion exchanger inhibitors, and weak base and acid. The intracellular lysosomal pH was determined with the acidic lifetime probes DM-NERF dextrans, OG-514 carboxylic acid dextrans, and LysoSensor DND-160. Our results showed that the resting lysosomal pH value obtained from the 3T3 fibroblasts was between 4.5 and 4.9. The increase of lysosomal pH induced by the treatments with proton pump inhibitor and ionophores also were observed in our FLIM measurements.

CONCLUSIONS

Our lifetime-based pH imaging data suggested that FLIM can measure the intracellular pH of the resting cells and follow the pH fluctuations inside the cells after environmental perturbations. To improve the z-axis resolution to the intracellular lifetime-resolved images, we are investigating the implementation of the pseudo-confocal capability to our current FLIM apparatus.

Evaluation of acridine in Nafion as a fluorescence-lifetime-based pH sensor

We report a novel fluorescence-lifetime-based pH sensing method that utilizes acridine incorporated into Nafion (AcNaf) as the fluorescent indicator. The AcNaf sensor is excited using a 380 nm light emitting diode (LED) and the fluorescence lifetimes are measured at 450 and 500 nm. The fluorescence behavior of acridine as a function of pH in aqueous phosphate buffers and incorporated into the Nafion membrane has been investigated. The results show that incorporating acridine into Nafion changes the apparent ground-state pKa from -5.45 to -9, while the apparent excited-state pKa* is only slightly changed (approximately 9.4 in 0.1 M phosphate buffer). The AcNaf film shows a good pH response with a change in average lifetime of approximately 19 ns (at an emission wavelength of 450 nm) over the pH 8 to 10 range. We also show that excited-state protonation does not occur in the AcNaf sensor film and that chloride quenching cannot occur because of the permselective nature of Nafion. We also discuss how the unique structure of Nafion affects the fluorescence behavior of acridine at various pH values and examine the impact of buffer concentration on apparent pKa and pH sensing ability.

Rotational dynamics of surface probes in lipid vesicles

Translational and rotational diffusion of fluorescent molecules on the surface of small biological systems such as vesicles, proteins and micelles depolarize the fluorescence. A recent study has treated the case of the translational dynamics of surface probes (M.M.G. Krishna, R. Das, N. Periasamy and R. Nityananda, J. Chem. Phys., 112 (2000) 8502-8514) using Monte Carlo and theoretical methods. Here we extend the application of the methodologies to apply the case of rotational dynamics of surface probes. The corresponding fluorescence anisotropy decays were obtained using the Monte Carlo simulation methods for the two cases: surface probes undergoing rotational dynamics on a plane and on a sphere. The results were consistent with the theoretical equations which show that Monte Carlo methods can be used to simulate the surface diffusion problems. The anisotropy decay for the rotational diffusion of a molecule on a planar surface is single exponential and the residual anisotropy is zero. However, residual anisotropy is finite for the case of rotational diffusion on a sphere because of the spatial averaging of the anisotropy function. The rotational correlation time in both the cases is (4Drot)(-1) with Drot being the rotational diffusion coefficient. Rotational dynamics of a surface bound dye in a single giant liposome and in sonicated vesicles were studied and the results were explained according to the theoretical equations. A fast component of fluorescence depolarization was also observed for sonicated vesicles which was interpreted as wobbling-in-cylinder dynamics of the surface-bound dye.

Fluorescence behavior of the pH-sensitive probe carboxy SNARF-1 in suspension of liposomes

When exposed to the intracellular environment fluorescent probes sensitive to pH exhibit changes of photophysical characteristics as a result of an interaction of the dye molecule with cell constituents such as proteins, lipids or nucleic acids. This effect is reflected in calibration curves different from those found with the same dye in pure buffer solutions. To study an interaction of the probe 5'(and 6')-carboxy-10-dimethylamino-3-hydroxy- spiro[7H-benzo[c]xanthene-7,1'(3H)-isobenzofuran]-3'-one (carboxy SNARF-1) with membrane lipids, we measured its fluorescence in model systems of large unilamellar vesicles (LUV) prepared by extrusion. When the dye was removed from the bulk solution by gel filtration the relative fluorescence intensity of the lipid-bound dye form was enhanced, showing a strong interaction of the dye molecule with LUV membrane lipids. Surprisingly, the dye molecules seem to be bound predominantly to the outer surface of the lipid bilayer. The same situation was found with small unilamellar vesicles prepared by sonication. This effect makes it difficult to use carboxy SNARF-1 for measurements of the internal pH in suspensions of liposomes.

Fluorescence lifetime microscopy of the sodium indicator sodium-binding benzofuran isophthalate in HeLa cells

The behavior of the sodium indicator sodium-binding benzofuran isophthalate (SBFI) is investigated in HeLa cells by time-resolved fluorescence microscopy. The fluorescence relaxation of SBFI in HeLa cells can be described by a triexponential for intracellular sodium concentration ([Na(+)](i)) between 0 and 90 mM. Changes in [Na(+)](i) affect neither the fluorescence relaxation times (0.21, 0. 60, and 2.7 ns) nor the average decay time (2.2 ns). The preexponential factor of the shortest decay time is negative. However, the ratio of the fluorescence excitation signal at 340 nm to that at 380 nm increases with [Na(+)](i). To elucidate the behavior of SBFI in cells, experiments are performed on SBFI in buffer at various concentrations of sodium, potassium, and bovine serum albumin (BSA) and at various viscosities. The fluorescence decay is triexponential only in the presence of BSA. The relaxation times are independent of [Na(+)] and [BSA]. The preexponential factor of the shortest decay time is negative from a certain [BSA] on, which depends on [Na(+)]. The data indicate that interactions with intracellular components rather than microviscosity influence the SBFI behavior in cells. A model is suggested in which the fluorescence intensities are mainly determined by the signals from the Na(+) subsetSBFI and SBFI subsetprotein complexes.

Optical nanosensors for chemical analysis inside single living cells. 1. Fabrication, characterization, and methods for intracellular delivery of PEBBLE sensors

Spherical optical nanosensors, or PEBBLEs (probes encapsulated by biologically localized embedding), have been produced in sizes including 20 and 200 nm in diameter. These sensors are fabricated in a microemulsion and consist of fluorescent indicators entrapped in a polyacrylamide matrix. A generalized polymerization method has been developed that permits production of sensors containing any hydrophilic dye or combination of dyes in the matrix. The PEBBLE matrix protects the fluorescent dye from interference by proteins, allowing reliable in vivo calibrations of dyes. Sensor response times are less than 1 ms. Cell viability assays indicate that the PEBBLEs are biocompatible, with negligible biological effects compared to control conditions. Several sensor delivery methods have been studied, including liposomal delivery, gene gun bombardment, and picoinjection into single living cells.

Lifetime-based pH sensors: indicators for acidic environments

We characterized the pH-dependent intensity decays of three fluorophores, Oregon green 514 carboxylic acid, Cl-NERF, and DM-NERF, using frequency-domain fluorometry, with the objective of identifying lifetime-based sensors for low pH values. These three probes were originally designed as dual excitation wavelength-ratiometric probes, with high photostability and high quantum yields in aqueous solutions. We found that their fluorescence intensity decays were strongly dependent on pH. Moreover, global intensity decays analysis reveals that these probes have double exponential intensity decays at intermediate pH values and that the decay time amplitudes are greatly dependent on pH. The longer lifetime components originated from the unprotonated forms and the shorter components from the protonated forms. Both forms can emit fluorescence at intermediate pH values. The apparent pKa values were also determined from the titration curves of phase angles and modulations versus pH for the purpose of pH sensing. The apparent pKa values range from pH 3 to 5, a range where lifetime-based sensors are not presently reported. Since these probes show low pKa values and display substantial phase and modulation changes with pH, they are suitable as lifetime-based pH sensors to monitor the pH changes in acidic environments. One potential application of these probes is to trace the pH in different cellular compartments.