Effect of degree, type, and position of unsaturation on the pKa of long-chain fatty acids

Improving the intestinal lipidome coverage in a gnotobiotic mouse model using UHPLC-MS-based approach through optimization of mobile phase modifiers and column selection

Lipidomics is focusing on the screening of lipid species in complex mixtures using mass spectrometry-based approaches. In this work, we aim to enhance the intestinal lipidome coverage within the Oligo-Mouse-Microbiota (OMM12) colonized mouse model by testing eight mobile phase conditions on five reversed-phase columns. Our selected mobile phase modifiers included two ammonium salts, two concentrations, and the addition of respective acids at 0.1 %. We compared two columns with hybrid surface technology, two with ethylene bridged hybrid technology and one with core-shell particles. Best performance was attained for standards and intestinal lipidome, using either ammonium formate or acetate in ESI(+) or ammonium acetate in ESI(-) for all column technologies. Notably, a concentration of 5 mM ammonium salt showed optimal results for both modes, while the addition of acids had a negligible effect on lipid ionization efficiency. The HST BEH C18 column improved peak width and tailing factor parameters compared to other technologies. We achieved the highest lipid count in colon and ileum content, including ceramides, phosphatidylethanolamines and phosphatidylcholines, when using 5 mM ammonium acetate in ESI(-). Conversely, in ESI(+) 5 mM ammonium formate demonstrated superior coverage for diacylglycerols and triacylglycerols.

New insights into starch, lipid, and protein interactions - Colon microbiota fermentation

Starch, lipids, and proteins are essential biological macromolecules that play a crucial role in providing energy and nutrition to our bodies. Interactions between these macromolecules have been shown to impact starch digestibility. Understanding and controlling starch digestibility is a key area of research. Investigating the mechanisms behind the interactions of these three components and their influence on starch digestibility is of significant practical importance. Moreover, these interactions can result in the formation of resistant starch, which can be fermented by gut microbiota in the colon, leading to various health benefits. While current research has predominantly focused on the digestive properties of starch in the small intestine, there is a notable gap in understanding the colonic microbial fermentation phase of resistant starch. The benefits of fermentation of resistant starch in the colon may outweigh its glucose-lowering effect in the small intestine. Thus, it is crucial to study the fermentation behavior of resistant starch in the colon. This paper investigates the impact of interactions among starch, lipids, and proteins on starch digestion, with a specific focus on the fermentation phase of indigestible carbohydrates in the colon. Furthermore, valuable insights are offered for guiding future research endeavors.

On the Structure, Stability, and Cell Uptake of Nanostructured Lipid Carriers for Drug Delivery

The efficacy of nanostructured lipid carriers (NLC) for drug delivery strongly depends on their stability and cell uptake. Both properties are governed by their compositions and internal structure. To test the effect of the lipid composition of NLC on cell uptake and stability, three kinds of liquid lipids with different degrees of unsaturation are employed. After ensuring homogeneous size distributions, the thermodynamic characteristics, stability, and mixing properties of NLC are characterized. Then the rates and predominant pathways of cell uptake are determined. Although the same surfactant is used in all cases, different uptake rates are observed. This finding contradicts the view that the surface properties of NLC are dominated by the surfactant. Instead, the uptake rates are explained by the structure of the nanocarrier. Depending on the mixing properties, some liquid lipids remain inside the nanocarrier, while other liquid lipids are present on the surface. Nanocarriers with liquid lipids on the surface are taken up more readily by the cells. This shows that the engineering of efficient lipid nanocarriers requires a delicate balance of interactions between all components of the nanocarrier on the molecular level.

Investigation of formation of AGEs precursors, hydroxymethylfurfural and malondialdehyde in oleogel added cakes using an in vitro simulated gastrointestinal digestive system

The baking process has the potential to generate health-risk compounds, including products from lipid oxidation and Maillard reaction. Pre- and post-digestion levels of hydroxymethylfurfural (HMF), malondialdehyde (MDA), glyoxal (GO), and methylglyoxal (MGO) were studied in cakes formulated with hazelnut and sunflower oil, along with their oleogels as margarine substitutes. The concentration of HMF in oil and oleogel-formulated cakes increased after digestion compared to cakes formulated with margarine. The MDA values were between 82 and 120 μg/100 g in oil and oleogel formulated cakes before digestion and a decrease was observed after digestion. The substitution of margarine with oil and oleogels resulted in the production of high amounts of GO and MGO in cakes. However, the highest bioaccessibility as 318.2% was found in cakes formulated by margarine for GO. Oleogels may not pose a potential health benefit compared to margarines due to the formation of HMF, MDA, GO, and MGO.

Interfacial Activity and Surface pKa of Perfluoroalkyl Carboxylic Acids (PFCAs)

Perfluoroalkyl carboxylic acids (PFCAs) are widely used synthetic chemicals that are known for their exceptional stability and interfacial activity. Despite their industrial and environmental significance, discrepancies exist in the reported pKa values for PFCAs, often spanning three to four units. These disparities stem from an incomplete understanding of how pH influences the ionized state of PFCA molecules in the bulk solution and at the air-water interface. Using pH titration and surface tension measurements, we show that the pKa values of the PFCAs adsorbed at the air-water interface differ from the bulk. Below the equivalence point, the undissociated and dissociated forms of the PFCAs exist in equilibrium, driving to the spontaneous adsorption and reduced air-water surface tension. Conversely, above the equivalence point, the complete ionization of the headgroup into the carboxylate form renders PFCAs highly hydrophilic, resulting in reduced interfacial activity of the molecules. The distinction in the chemical environments at the interface and bulk results in differences in the pKa of PFCA molecules in the bulk phase and at the air-water interface. We explore the effects of the fluoroalkyl tail length of PFCAs on their surface pKa and interfacial activity across a broad pH range. We further demonstrate the influence of pH-dependent ionized state of PFCAs on their foamability and the rate of microdroplet evaporation, understanding of which is crucial for optimizing their industrial applications and developing effective strategies for their environmental remediation. This study underscores the potential significance of pH in directing the interfacial activity of PFCAs and prompts the inclusion of pH as a key determinant in the predictions of their fate and potential risks in the environment.

Fatty acid unsaturation improves germination of upland cotton (Gossypium hirsutum) under cold stress

Introduction

The level of fatty acid unsaturation in seeds is one of the major determinants of cold germination ability, particularly in oilseeds. The presence of cis double bonds in unsaturated fatty acids creates bends that lowers their melting temperatures compared to saturated fatty acids. Unsaturated fatty acids with low melting points mobilize faster at low temperatures providing seeds with sufficient energy for germination.

Methodology

To investigate the effects of fatty acid unsaturation on the ability of cotton seeds to germinate under cold conditions, four recombinant inbred lines (RILs) of cotton with unique fatty acid profiles were evaluated using a set of developmental and biochemical assays at 12°C (critically low temperature), 15°C (cardinal minimum temperature) and 30°C (optimum temperature). Furthermore, whole seed lipidome profiling using liquid chromatography with mass spectrometry was done to compare the lipid compositional changes at 12°C and 30°C after imbibing cotton seeds of all the six genotypes for 0 hours, 3 hours and 6 hours.

Results and discussion

The RILs with higher unsaturation/saturation ratios registered robust germination performance, lower solute leakage, and optimum water uptake rates under cold stress. Imbibition at 30°C for 8 hours before cold exposure significantly improved the germination of cold sensitive genotypes, indicating that the first few hours of water uptake are critical for cold stress. Whole seed lipidome profiling of all the genotypes specifically associated cold germination ability with higher unsaturation levels of phospholipids during early imbibition. The presence of cis double bonds in phospholipids creates kinks that maintain the fluidity of cell membranes under low temperature. Membrane flexibility under cold conditions is essential for facilitating key germination events including membrane organization and respiration. The current results highlight the importance of fatty acid composition in cold germination ability of upland cotton.

The use of polymorphic state modifiers in solid lipid microparticles: The role of structural modifications on drug release performance

This study investigates the correlation between the structural and release properties of solid lipid microparticles (MPs) of tristearin containing 5 % w/w of four different liquid additives used as crystal modifiers: isopropyl myristate (IM), ethyl oleate (EO), oleic acid (OA) and medium chain triglycerides (MCT). All additives accelerated the conversion of the unstable α-form of tristearin, formed after the MPs manufacturing, to the stable β-polymorph and the transformation was completed within 24 h (for IM and EO) or 48 h (for OA and MCT). The kinetic of polymorphic transition at 25 °C was investigated by simultaneous synchrotron SAXS/WAXS and DSC analysis after melting and subsequent cooling of the lipid mixture. After crystallization in the α-phase, additives accelerate the solid-solid phase transformation to β-tristearin. SAXS data showed that two types of structural modifications occurred on MPs during storage: compaction of the crystal packing (slight decrease in lamellar thickness) and crystal growth (increased number of stacked lipid lamellae). The release behavior of a model hydrophilic drug (caffeine) at two different amounts (15 % and 30 %) from MPs was studied in water and biorelevant media simulated the gastric and intestinal environment. It was particularly significant that the introduction of IM, EO and MCT were able to prolong the drug release in water, passing from a diffusion-based Higuchi kinetics to a perfect zero-order kinetic. Moreover, the overall release profiles were higher in biorelevant media, where erosion/digestion of MPs was observed. After 6 months, a moderate but statistically significant change in release profile was observed for the MPs with IM and EO, which can be correlated with the time-dependent structural alterations (i.e. larger average crystallite size) of these formulations; while MPs with OA or MCT displayed stable release profiles. These findings help to understand the correlation between release behavior, polymorphism and supramolecular-level structural modification of lipid formulations containing crystal modifiers.

All-in-one stability indicating polysorbate 20 degradation root-cause analytics via UPLC-QDa

Polysorbates (PS) are the most frequently used surfactants to stabilize biologicals. Ironically, these excellent stabilizing non-ionic surfactants have inherent structural properties, which lead to instabilities of their own. Such PS degradation can be triggered by multiple root-causes, like chemical and enzymatic hydrolysis or oxidative degradation. This can on the one hand reduce the concentration of surface-active PS and on the other hand lead to the formation of unfavorable degradants, like poorly soluble free fatty acids (FFA), which may phase separate and form visible FFA particles. Due to the potential criticality of PS degradation in biopharmaceutical formulations, various analytics have been established in recent years not only to monitor the PS content but also to evaluate specific PS markers and crucial degradants. However, in most cases sample preparations and several analytical assays have to be conducted to obtain a comprehensive picture of potential PS degradation root-causes. Here we show a novel approach for PS degradation UPLC-QDa based root-cause analytics, which utilizes previously established analytics for (i) most relevant polysorbate 20 (PS20) esters, (ii) PS20 free fatty acids and (iii) a newly developed method for the evaluation of PS20 specific oxidation markers. Thereby, this triad of analytical methods uses the same sample preparation and detector, which reduces the overall necessary effort, time investment and sample volume. Furthermore, the innovative PS20 oxidation marker method allows to quantify specific concentrations of the determined markers by external calibration and possible perception of oxidative degradation processes prior to relevant losses of PS20 esters, which could serve as an early indication during formulation development. The applicability of this method set was verified using several PS20 containing stress samples, which cover the most relevant root-causes, including acidic and alkaline hydrolysis, enzyme mediated hydrolysis, oxidative AAPH stress and Fe2+/H2O2 mediated degradation as well as autoxidation via long-term storage at elevated temperatures. Overall, this analytical setup has shown to deliver in-depth data about PS20 degradation, which can be used to narrow down the causative stress without the necessity of fundamentally different methods. Therefore, it can be seen as all-in-one solution during sometimes troublesome development of biopharmaceutical formulations, that supports the elucidation of the PS degradation mechanism(s) and thus establish mitigation strategies.

Effects on the Human Tear Film of Applying Skin Lipids to the Ocular Surface

PURPOSE

The effect of skin lipids on the formation and stability of the human tear film was investigated.

METHODS

Skin swab substances (SSSs) were applied to the eyes of volunteers and studied using fluorescein or with TearView, which records infrared emissivity showing tear film integrity in real time. Results were compared with similar experiments using castor oil, freshly collected meibum, or acetic acid, which simulated the low pH of the skin.

RESULTS

Fluorescein and TearView results were comparable. TearView showed the natural unaltered tear film over the whole eye, instant changes to the tear film, and meibomian gland activity. Minimal amounts of SSS destroyed the integrity of the film and caused pain. Corneal epithelial damage could be detected. TearView showed that SSS stimulated meibomian gland secretion if applied directly to the posterior eyelid margin. Excess meibum had no effect on the tear film spread or integrity. Castor oil formed floating lenses on the tear film which were spread by a blink but then condensed back toward themselves. There was no pain or surface damage with these oils.

CONCLUSIONS

SSS contamination of the ocular surface disrupts the tear film, causes stinging, and fluorescein staining of the corneal epithelial cells after a blink. SSS stimulates meibomian gland activity. It is possible that various ocular conditions associated with dry eye, such as blepharitis and ocular rosacea, may compromise a meibomian lipid barrier of the eye lid margin. Skin lipids would then have access to the ocular surface and cause dry eye symptoms.

Combinatorial mixtures of organic solutes for improved liquid/liquid extraction of ions

Biological systems routinely extract and organize ions in complex yet highly ordered and active systems. Much of this function is attributed to proteins, although recent evidence indicates aggregates of lipids are also capable of molecular recognition. Here we tested the hypothesis that combinatorial mixtures of organic solutes might lead to enhanced liquid/liquid extraction. We started with liquid oleic acid as an organic phase extracting copper ions from water and added a library of additives. By using Bayesian optimization to autonomously direct the combinatorial formulation, we discovered mixtures that enhanced the extraction performance. The main additive that improved the system was octylphosphonic acid. Interestingly, the optimal mixture has a significant improvement compared to this additive alone. This suggests that the combinations of organic solutes are better than using pure components in liquid/liquid extraction. Furthermore, we found that precipitation occurs in the samples showing better extraction efficiency, which has interesting material properties and potential for new types of supramolecular biosensors.

Saturated long chain fatty acids as possible natural alternative antibacterial agents: Opportunities and challenges

The spread of new strains of antibiotic-resistant pathogenic microorganisms has led to the urgent need to discover and develop new antimicrobial systems. The antibacterial effects of fatty acids have been well-known and recognized since the first experiments of Robert Koch in 1881, and they are now used in diverse fields. Fatty acids can prevent the growth and directly kill bacteria by insertion into their membrane. For that, a sufficient amount of fatty acid molecules has to be solubilized in water to transfer from the aqueous phase to the cell membrane. Due to conflicting results in the literature and lack of standardization methods, it is very difficult to draw clear conclusions on the antibacterial effect of fatty acids. Most of the current studies link fatty acids' effectiveness against bacteria to their chemical structure, notably the alkyl chain length and the presence of double bonds in their chain. Furthermore, the solubility of fatty acids and their critical aggregation concentration is not only related to their structure, but also influenced by medium conditions (pH, temperature, ionic strength, etc.). There is a possibility that the antibacterial activity of saturated long chain fatty acids (LCFA) may be underestimated due to the lack of water solubility and the use of unsuitable methods to assess their antibacterial activity. Thus, enhancing the solubility of these long chain saturated fatty acids is the main goal before examining their antibacterial properties. To increase their water solubility and thereby improve their antibacterial efficacy, novel alternatives may be considered, including the use of organic positively charged counter-ions instead of the conventional sodium and potassium soaps, the formation of catanionic systems, the mixture with co-surfactants, and solubilization in emulsion systems. This review summarizes the latest findings on fatty acids as antibacterial agents, with a focus on long chain saturated fatty acids. Additionally, it highlights the different ways to improve their water solubility, which may be a crucial factor in increasing their antibacterial efficacy. We finish with a discussion on the challenges, strategies and opportunities for the formulation of LCFAs as antibacterial agents.

Lipid Membrane Remodeling by the Micellar Aggregation of Long-Chain Unsaturated Fatty Acids for Sustainable Antimicrobial Strategies

Antimicrobial fatty acids derived from natural sources and renewable feedstocks are promising surface-active substances with a wide range of applications. Their ability to target bacterial membrane in multiple mechanisms offers a promising antimicrobial approach for combating bacterial infections and preventing the development of drug-resistant strains, and it provides a sustainable strategy that aligns with growing environmental awareness compared to their synthetic counterparts. However, the interaction and destabilization of bacterial cell membranes by these amphiphilic compounds are not yet fully understood. Here, we investigated the concentration-dependent and time-dependent membrane interaction between long-chain unsaturated fatty acids-linolenic acid (LNA, C18:3), linoleic (LLA, C18:2), and oleic acid (OA, C18:1)-and the supported lipid bilayers (SLBs) using quartz crystal microbalance-dissipation (QCM-D) and fluorescence microscopy. We first determined the critical micelle concentration (CMC) of each compound using a fluorescence spectrophotometer and monitored the membrane interaction in real time following fatty acid treatment, whereby all micellar fatty acids elicited membrane-active behavior primarily above their respective CMC values. Specifically, LNA and LLA, which have higher degrees of unsaturation and CMC values of 160 µM and 60 µM, respectively, caused significant changes in the membrane with net |Δf| shifts of 23.2 ± 0.8 Hz and 21.4 ± 0.6 Hz and ΔD shifts of 5.2 ± 0.5 × 10^-6 and 7.4 ± 0.5 × 10^-6. On the other hand, OA, with the lowest unsaturation degree and CMC value of 20 µM, produced relatively less membrane change with a net |Δf| shift of 14.6 ± 2.2 Hz and ΔD shift of 8.8 ± 0.2 × 10^-6. Both LNA and LLA required higher concentrations than OA to initiate membrane remodeling as their CMC values increased with the degree of unsaturation. Upon incubating with fluorescence-labeled model membranes, the fatty acids induced tubular morphological changes at concentrations above CMC. Taken together, our findings highlight the critical role of self-aggregation properties and the degree of unsaturated bonds in unsaturated long-chain fatty acids upon modulating membrane destabilization, suggesting potential applications in developing sustainable and effective antimicrobial strategies.

Protein Fractions from Flaxseed: The Effect of Subsequent Extractions on Composition and Antioxidant Capacity

Flaxseed proteins exhibit functionalities interesting for the food industry, including antioxidant capacity. Antioxidant activity depends on the protein composition and the presence of phenolic compounds extracted with them from the matrix. The research focused on the effect of subsequent protein extractions (water, salt and alkaline) of flaxseed meals (of three cultivars) on the protein fraction composition and its relations to antioxidant capacity. The protein and phenolic profiles and antioxidant functionalities (in antiradical ORAC and emulsion assays) were analysed. Spectroscopic characteristics of the fractions (fluorometric and FT-IR analysis) were also included. Our study has shown the effect of fractionation on the share of proteins at MW from 56–38 kDa (globulin-like) and <15 kDa (albumin-like) in the protein profiles. The highest globulin share was in the alkaline-extracted fractions (AEF) and albumin in the salt-extracted (SEF) ones. SDG (secoisolariciresinol diglucosides) and phenolic acids (p-coumaric and ferulic) were extracted with flaxseed proteins. Their contents were fraction-dependent and the highest in AEF. The concentration of phenolics in AEF corresponded with the highest antiradical capacity (ORAC) compared with the other fractions. However, the SEF showed a higher ability to inhibit oxidation in emulsions than AEF, which could be associated with the higher content of the low MW proteins.

Modulation of the crystallization of rapeseed oil using lipases and the impact on ice cream properties

We investigated the possibility to use rapeseed as a main oil in ice cream formulations by changing its functionality when using different kinds of lipases. Through a 24 h-emulsification and a centrifugation, the modified oils were further used as functional ingredients. All lipolysis was first assessed as a function of time by ¹³C NMR, where triglycerides consumption and the formation of low-molecular polar lipids (LMPL: monoacylglycerol and free fatty acids, FFAs) were selectively identified and compared. The more the FFAs, the sooner the crystallization (from -55 to -10 °C) and the later the melting temperatures (from -17 to 6 °C) measured by differential scanning calorimetry. These modifications were exploited in ice cream formulations with a significant impact on overall hardness (range of 60-216 N) and flowing during defrosting (from 1.29 to 0.35g/min). The global behavior of products can be controlled by the composition of LMPL within oil.

Altering the Regioselectivity of T1 Lipase from Geobacillus zalihae toward sn-3 Acylglycerol Using a Rational Design Approach

The regioselectivity characteristic of lipases facilitate a wide range of novel molecule unit constructions and fat modifications. Lipases can be categorized as sn-1,3, sn-2, and random regiospecific. Geobacillus zalihae T1 lipase catalyzes the hydrolysis of the sn-1,3 acylglycerol chain. The T1 lipase structural analysis shows that the oxyanion hole F16 and its lid domain undergo structural rearrangement upon activation. Site-directed mutagenesis was performed by substituting the lid domain residues (F180G and F181S) and the oxyanion hole residue (F16W) in order to study their effects on the structural changes and regioselectivity. The novel lipase mutant 3M switches the regioselectivity from sn-1,3 to only sn-3. The mutant 3M shifts the optimum pH to 10, alters selectivity toward p-nitrophenyl ester selectivity to C14-C18, and maintains a similar catalytic efficiency of 518.4 × 10−6 (s−1/mM). The secondary structure of 3M lipase comprises 15.8% and 26.3% of the α-helix and β-sheet, respectively, with a predicted melting temperature (Tm) value of 67.8 °C. The in silico analysis was conducted to reveal the structural changes caused by the F180G/F181S/F16W mutations in blocking the binding of the sn-1 acylglycerol chain and orientating the substrate to bond to the sn-3 acylglycerol, which resulted in switching the T1 lipase regioselectivity.

Proteins involved in fat-soluble vitamin and carotenoid transport across the intestinal cells: New insights from the past decade

It is now well established that vitamins D, E, and K and carotenoids are not absorbed solely through passive diffusion. Broad-specificity membrane transporters such as SR-BI (scavenger receptor class B type I), CD36 (CD36 molecule), NPC1L1 (Niemann Pick C1-like 1) or ABCA1 (ATP-binding cassette A1) are involved in the uptake of these micronutrients from the lumen to the enterocyte cytosol and in their secretion into the bloodstream. Recently, the existence of efflux pathways from the enterocyte back to the lumen or from the bloodstream to the lumen, involving ABCB1 (P-glycoprotein/MDR1) or the ABCG5/ABCG8 complex, has also been evidenced for vitamins D and K. Surprisingly, no membrane proteins have been involved in dietary vitamin A uptake so far. After an overview of the metabolism of fat-soluble vitamins and carotenoids along the gastrointestinal tract (from the mouth to the colon where interactions with microbiota may occur), a focus is placed on the identified and candidate proteins participating in the apical uptake, intracellular transport, basolateral secretion and efflux back to the lumen of fat-soluble vitamins and carotenoids in enterocytes. This review also highlights the mechanisms that remain to be identified to fully unravel the pathways involved in fat-soluble vitamin and carotenoid intestinal absorption.

Innovative pulmonary targeting of terbutaline sulfate-laded novasomes for non-invasive tackling of asthma: statistical optimization and comparative in vitro/in vivo evaluation

Asthma represents a globally serious non-communicable ailment with significant public health outcomes for both pediatrics and adults triggering vast morbidity and fatality in critical cases. The β₂-adrenoceptor agonist, terbutaline sulfate (TBN), is harnessed as a bronchodilator for monitoring asthma noising symptoms. Nevertheless, the hepatic first-pass metabolism correlated with TBN oral administration mitigates its clinical performance. Likewise, the regimens of inhaled TBN dosage forms restrict its exploitation. Consequently, this work is concerned with the assimilation of TBN into a novel non-phospholipid nanovesicular paradigm termed novasomes (NVS) for direct and effective TBN pulmonary targeting. TBN-NVS were tailored based on the thin film hydration method and Box-Behnken design was applied to statistically optimize the formulation variables. Also, the aerodynamic pattern of the optimal TBN-NVS was explored via cascade impaction. Moreover, comparative pharmacokinetic studies were conducted using a rat model. TBN elicited encapsulation efficiency as high as 70%. The optimized TBN-NVS formulation disclosed an average nano-size of 223.89 nm, ζ potential of −31.17 mV and a sustained drug release up to 24 h. Additionally, it manifested snowballed in vitro lung deposition behavior in cascade impactor with a fine particle fraction of 86.44%. In vivo histopathological studies verified safety of intratracheally-administered TBN-NVS. The pharmacokinetic studies divulged 3.88-fold accentuation in TBN bioavailability from the optimum TBN-NVS versus the oral TBN solution. Concisely, the results proposed that NVS are an auspicious nanovector for TBN pulmonary delivery with integral curbing of the disease owing to target specificity.

Preparation and evaluation of a lipid-based drug delivery system to ımprove valsartan oral bioavailability: pharmacokinetic and pharmacodynamic analysis

Antihypertensive treatment reduces the risk of cardiovascular complications in patients with high mortality with hypertension. Valsartan is highly selective antihypertensive that is rapidly absorbed after oral administration, but its oral bioavailability is only 25%. It is absorbed from the upper part of the gastrointestinal tract but is less soluble in this acidic environment. We aimed to develop a lipid-based formulation to produce a self-emulsifying drug delivery system (SEDDS) for valsartan. Solubility studies were performed to identify the components of the SEDDS that provided the best dissolution of valsartan. Ternary phase diagrams were drawn using the titration method with oil, surfactants and co-surfactants in which valsartan was highly soluble, and microemulsion formulations with the highest area were determined. Characterization and in vitro release studies were performed to optimize the formulation. In vitro release profiles of commercial and SEDDS formulations showed the F2 formulation release rate increased at pH 1.2 fasted state simulated gastric fluid. After oral administration, plasma drug concentrations in rats indicate that the F2 formulation provided a 4.2-fold greater AUC for valsartan than the commercial formulaiton, resulting in an 8.5-fold greater Cmax. These findings suggest the F2 formulation increases valsartan solubility, resulting in an improved oral pharmacokinetic profile. According to the pharmacodynamic study, the F2 formulation is more effective than the commercial formulation in restoring systolic and diastolic blood pressure within a few hours.

Study and optimization of oil-in-water emulsions formulated by low- and high-frequency ultrasounds

OBJECTIVE

A combined treatment using both low-frequency (20 kHz) and high-frequency ultrasounds (1.63 MHz) is a promising new process to stabilize emulsions with minimalist formulation. In order to optimize process parameters, a Doehlert experimental design was performed with oil-in-water emulsions, presently used for cosmetic products, composed of water, caprylic/capric triglycerides and oleic acid.

METHODS

Effects of treatment time, oil content and oleic acid content were studied on emulsion properties (droplet size, polydispersity index, ζ-potential and yield of oil incorporation) and on emulsion stability after a 28-day storage (creaming index, Turbiscan stability index (TSI) and oil release).

RESULTS

From experimental data, a model was established that allowed to study effects of each parameter and their interactions on emulsion formation and stability. Oleic acid content had a great impact on emulsion formation: It reduced droplet size, PDI and ζ-potential and increased yield of oil incorporation. However, a critical value could be highlighted, beyond which oleic acid effects reversed. Treatment time had an important beneficial effect on emulsion stability as it decreased creaming index, TSI and oil release after 28 days of storage. Oil content had a negative effect on emulsion formation and on emulsion stability. However, treatment time and oil content often had a beneficial synergistic effect.

CONCLUSION

The optimized conditions for emulsion processing were obtained through a desirability approach. They were experimentally validated.

Tribochemical synergy between phosphate-intercalated layered double hydroxide additives and super high oleic safflower oil on sliding contacts

In this study, the tribological properties of a series of layered double hydroxides (LDHs) intercalated by various phosphate anions (hydrogen phosphate, orthophosphate, pyrophosphate, and hexametaphosphate) were investigated by ball-on-disc testing in safflower oil which has a super high content of oleic acid (OA). The Mg-Al-NO₃^- LDH precursor was first synthesized by a coprecipitation method, and then nitrate anions were substituted by different phosphate anions via anion exchange. The successful intercalations were confirmed by X-ray powder diffraction (XRD), Fourier-transform infrared (FTIR) spectroscopy, and scanning electron microscopy/energy dispersive X-ray spectroscopy (SEM/EDS) analysis. The tribological results indicate that the antiwear properties increased linearly with the basic strength of the phosphate anions. Stronger bases, such as orthophosphate (PO₄^3-) and pyrophosphate (P₂O₇^4-), encourage the dissociation of OA to form a protective oleate tribofilm on steel surfaces, leading to more than 40% wear reduction compared to the base oil. The tribological performance of the best antiwear candidate, PO₄^3--LDH, was studied further under different loads and concentrations. A comparison between PO₄^3--LDH and other nanomaterials was also carried out with PO₄^3--LDH exhibiting a comparable performance against hexagonal boron nitride (BN).

Electron transfer dynamics and electrocatalytic oxygen evolution activities of the Co3O4 nanoparticles attached to indium tin oxide by self-assembled monolayers

The Co3O4 nanoparticle-modified indium tin oxide-coated glass slide (ITO) electrodes are successfully prepared using dicarboxylic acid as the self-assembled monolayer through a surface esterification reaction. The ITO-SAM-Co3O4 (SAM = dicarboxylic acid) are active to electrochemically catalyze oxygen evolution reaction (OER) in acid. The most active assembly, with Co loading at 3.31 × 10−8 mol cm−2, exhibits 374 mV onset overpotential and 497 mV overpotential to reach 1 mA cm−2 OER current in 0.1 M HClO4. The electron transfer rate constant (k) is acquired using Laviron’s approach, and the results show that k is not affected by the carbon chain lengths of the SAM (up to 18 -CH2 groups) and that an increase in the average diameter of Co3O4 nanoparticles enhances the k. In addition, shorter carbon chains and smaller Co3O4 nanoparticles can increase the turn-over frequency (TOF) of Co sites toward OER. The Co3O4 nanoparticles tethered to the ITO surface show both a higher number of electrochemically active Co sites and a higher TOF of OER than the Co3O4 nanoparticles bound to ITO using Nafion.

Photoinduced Charge Transfer from Quantum Dots Measured by Cyclic Voltammetry

Measuring and modulating charge-transfer processes at quantum dot interfaces are crucial steps in developing quantum dots as photocatalysts. In this work, cyclic voltammetry under illumination is demonstrated to measure the rate of photoinduced charge transfer from CdS quantum dots by directly probing the changing oxidation states of a library of molecular charge acceptors, including both hole and electron acceptors. The voltammetry data demonstrate the presence of long-lived charge donor states generated by native photodoping of the quantum dots as well as a positive correlation between driving force and rate of charge transfer. Changes to the voltammograms under illumination follow mechanistic predictions from the E_rC_i' zone diagram, and electrochemical modeling allows for measurement of the rate of productive electron transfer. Observed rates for photoinduced charge transfer are on the order of 0.1 s^-1, which are distinct from the picosecond dynamics measured by conventional transient optical spectroscopy methods and are more closely connected to the quantum yield of light-mediated chemical transformations.

Structural, physicochemical properties, and digestibility of lotus seed starch-conjugated linoleic acid complexes

This paper describes a new method combining octenyl succinic anhydride (OSA) esterification and high hydrostatic pressure for starch modification, which interacts with conjugated linoleic acid (CLA) to form an octenyl succinic anhydride-lotus seed starch-conjugated linoleic acid (OSA-LS-CLA) complex. This method proves the formation of complex observed by fourier transform infrared spectroscopy and complex index. The stable structure of the complex was derived from increasing molecular weight by introducing macromolecular conjugated linoleic acid and the higher crystallinity than original starch observed by X-ray diffraction. The formation method and changes of complex were observed by scanning electron microscopy and confocal laser scanning microscope. The solubility and swelling power of the complex increases as the temperature increased, significantly at 75 °C. The formation of the OSA-LS-CLA complex significantly reduced the digestion rate of LS, which was 26 % lower than that of LS. These results indicate that the OSA-LS-CLA under high hydrostatic pressure can form a complex with stable structure, which makes up for the deficiency of raw starch to a certain extent. And the formation of this structure can improve the thermal stability of the complex and has strong digestion resistance, which provides a potential direction for further research in reducing starch digestibility.

Hybrid Lipid/Clay Carrier Systems Containing Annatto Oil for Topical Formulations

Nanocomposites formed by clay and lipid carriers (NLCs) show a high potential for providing controlled release and specific delivery of bioactive molecules and have recently gained attention in the pharmaceutical sector due to their ability to transport hydrophilic and hydrophobic drugs. Recent studies have recognized the biological activity of the oil of Bixa orellana L. (AO) with regards to its healing, antioxidant, antibacterial, and anti-leishmanial properties. Therefore, the purpose of this study is the preparation and characterization of hybrid systems based on lipid nanocarriers and laponite for the delivery of AO. NLCs were prepared by the fusion-emulsification method, using cetyl palmitate (CP) or myristyl myristate (MM), AO, and Poloxamer 188. The morphology, hydrodynamic diameters, zeta potential (ZP), polydispersity index (PDI), thermal analysis, X-ray diffraction analysis (XRD), viscosity behavior, and cytotoxicity testing of the hybrid systems were performed. The thermal study and X-ray diffraction analyses (XRD) revealed polymorphic structural changes compatible with the amorphization of the material. Rheological assays highlighted a typical pseudoplastic behavior in all systems (MM and CP with LAP). The hybrid systems’ morphology, size diameters, and PDIs were similar, preset spherical and monodisperse structures (≈200 nm; <0.3), without significant change up to sixty days. The ZP values differed from each other, becoming higher with increasing AO concentration. XEDS spectra and elemental X-ray maps show peaks of lipids (organic components, C and O) and inorganic components O, Mg, and Si. All samples showed cell viability above 60%. The results indicated a stable, biocompatible hybrid system that can be an alternative for topical application.

Constant pH Coarse-Grained Molecular Dynamics with Stochastic Charge Neutralization

pH dependence abounds in biochemical systems; however, many simulation methods used to investigate these systems do not consider this property. Using a modified version of the hybrid non-equilibrium molecular dynamics (MD)/Monte Carlo algorithm, we include a stochastic charge neutralization method, which is particularly suited to the MARTINI force field and enables artifact-free Ewald summation methods in electrostatic calculations. We demonstrate the efficacy of this method by reproducing pH-dependent self-assembly and self-organization behavior previously reported in experimental literature. In addition, we have carried out experimental oleic acid titrations where we report the results in a more relevant way for the comparison with computational methods than has previously been done.

Revisiting the Roles of Filaggrin in Atopic Dermatitis

The discovery in 2006 that loss-of-function mutations in the filaggrin gene (FLG) cause ichthyosis vulgaris and can predispose to atopic dermatitis (AD) galvanized the dermatology research community and shed new light on a skin protein that was first identified in 1981. However, although outstanding work has uncovered several key functions of filaggrin in epidermal homeostasis, a comprehensive understanding of how filaggrin deficiency contributes to AD is still incomplete, including details of the upstream factors that lead to the reduced amounts of filaggrin, regardless of genotype. In this review, we re-evaluate data focusing on the roles of filaggrin in the epidermis, as well as in AD. Filaggrin is important for alignment of keratin intermediate filaments, control of keratinocyte shape, and maintenance of epidermal texture via production of water-retaining molecules. Moreover, filaggrin deficiency leads to cellular abnormalities in keratinocytes and induces subtle epidermal barrier impairment that is sufficient enough to facilitate the ingress of certain exogenous molecules into the epidermis. However, although FLG null mutations regulate skin moisture in non-lesional AD skin, filaggrin deficiency per se does not lead to the neutralization of skin surface pH or to excessive transepidermal water loss in atopic skin. Separating facts from chaff regarding the functions of filaggrin in the epidermis is necessary for the design efficacious therapies to treat dry and atopic skin.

Atmospheric chemical processes of microcystin-LR at the interface of sea spray aerosol

Microcystins are the most toxic toxins released by cyanobacteria and they have adverse effects on aquatic ecosystems and even human health. Although the removal and detoxification of microcystins in various water bodies have been extensively studied, the interaction mechanism and reaction process of microcystins once they enter the atmosphere are largely unknown, especially at the organic-enriched sea spray aerosol (SSA) interface. Herein, using the surface technique of Langmuir trough coupled in-situ infrared reflection-absorption spectra, we studied the interfacial behavior of microcystin-LR (MC-LR) in artificial seawater containing humic acid and typical surfactants in the presence or absence of UV-irradiation. Zwitterionic 1,2-distearoyl-sn-glycero-3-phosphocholine (DSPC) and anionic stearic acid (SA) were chosen as typical film-forming species, results obtained from the surface pressure-area isotherms showed that MC-LR caused greater expansion of the DSPC monolayer. The comparable results of MC-LR in DSPC/SA-containing systems indicated that the interaction ability was closely related to the monolayer molecular structure and was regulated by electrostatic interaction. Furthermore, the presence of humic acid (HA) could enhance the interaction between microcystin and monolayer molecules. UV-irradiation experiments showed that the photosensitized reaction greatly promoted the removal of microcystin embedded in the SSA surface compared with the direct photolysis effect in the absence of HA. These findings highlight that the toxic effects of microcystins after entering the atmosphere may be weakened by photochemical reactions.

Recombinant Porcine 12-Lipoxygenase Catalytic Domain: Effect of Inhibitors, Selectivity of Substrates and Specificity of Oxidation Products of Linoleic Acid

Lipoxygenase (LOX) is a major endogenous enzyme for the enzymatic oxidation of lipids during meat storage and meat product manufacturing. In the present work, some characteristics, i.e., effects of inhibitors, selectivity of substrates and specificity of oxidation products, were studied using recombinant porcine 12-lipoxygenase catalytic domain (12-LOXcd). Several familiar inhibitors were found inhibit the activity of recombinant porcine 12-LOXcd;nordihydroguaiaretic acid demonstrated the strongest inhibitory effect. The enzyme could oxygenate common polyunsaturated fatty acids, and showed the highest affinity to linoleic acid (LA), followed by arachidonic acid (AA), linolenic acid (LN) and docosahexaenoic acid (DHA). Under the action of porcine 12-LOXcd, LA was oxidized into four hydroxyoctadecadienoic acid (HODE) isomers, i.e., 13-Z,E-HODE, 13-E,E-HODE, 9-Z,E-HODE and 9-E,E-HODE. Variation of pH not only affected the yield of LA oxidation products, but also the distribution of HODE isomers. These results indicated that endogenous LOX activity and LOX-catalyzed lipid oxidation can be regulated during meat storage and meat product manufacturing.

Salting-Up of Surfactants at the Surface of Saline Water as Detected by Tensiometry and SFG and Supported by Molecular Dynamics Simulation

Surfactant adsorption at the air-water interface is critical to many industrial processes but its dependence on salt ions is still poorly understood. Here, we investigate the adsorption of sodium dodecanoate onto the air-water interface using model saline waters of Li⁺ or Cs⁺ at pH values 8 and 11. Both cations enhance the surfactant adsorption, as expected, but their largest effects on the adsorption also depend on pH. Specifically, surface tension measurements, sum-frequency generation spectroscopy, and microelectrophoresis show that small (hard) Li⁺ enhances the surfactant adsorption more than large (soft) Cs⁺ at pH 11. This effect is fully reversed at pH 8. We argue that this salting-up (increasing adsorption) reversal is attributable to the conversion of the neutralized carboxylic (-COOH) headgroup at pH 8 into the charged carboxylate (-COO^-) headgroup at pH 11, which, respectively, interact with Cs⁺ and Li⁺ favorably. Molecular dynamics simulation shows that the affinity of Cs⁺ to the interface is decreased and eventually overtaken by Li⁺ as the carboxylic groups are deprotonated. This study highlights the importance of the charge and size of salt ions in selecting surfactants and electrolytes for industrial applications.

Going green: Development of a sustainable lipid-based enteric coating formulation for low-dose aspirin multiparticulate systems

There is a rising awareness of pharmaceutical industry of both patient-centric and sustainable product development. Manufacturing of multiparticulate systems (MPS) with functional coating via solvent-free hot melt coating (HMC) can fulfill both requirements. An innovative lipid-based formulation was developed with the composition of palmitic acid and Grindsted® citrem BC-FS (BC-FS) for enteric coating of acetylsalicylic acid (ASA). The ASA crystals were directly hot melt coated to produce user-friendly low-dose ASA MPS for thromboembolism prophylaxis. Prior to HMC, rational boundaries for the process temperature were defined based on the melting and crystallization behavior of coating blend. Stability of coating in terms of resistance to heat stress and solidstate stability were screened via Fourier-transform infrared spectroscopy and x-ray diffraction. Exposure of coating blend to 100 °C for two hours did not cause any chemical degradation. Crystal growth of palmitic acid and polymorphic transformation in BC-FS were observed after storage under accelerated conditions, however did not significantly affect the ASA release from coating. The developed formulation is a unique solvent-free, lipid-based enteric composition and paves the way for sustainable green pharmaceutical manufacturing.

Methods for Forming Giant Unilamellar Fatty Acid Vesicles

Fatty acids readily assemble into bilayer membranes at a pH near their apparent pK_a. Fatty acid vesicles are not only useful for research in the fields of origins of life, soft matter science, biophysics, and drug delivery, but are also cost-effective and easy to manipulate, making them ideal for teaching students about self-assembly and lipid bilayers. Here, we describe simple ways to make giant, unilamellar fatty acid vesicles suitable for microscopy and encapsulation studies.

Fish Nutritional Value as an Approach to Children's Nutrition

Fish is a relatively cheap and accessible source of animal protein for human consumption even in rural communities. It is critical for global food and nutrition security, and its consumption continues to increase. As a highly nutritious food, fish consumption is highly recommended for children and expectant mothers for normal growth and development. The present paper explores the nutritional value of fish as approach to nutrition in children and its benefits. The findings reveal that fish is a valuable source of essential amino acids (EAA) and polyunsaturated fatty acids (PUFAs) that play important physiological functions for maintenance and development of fetuses, neonates, and infant brains. Therefore, it could be a valuable tool in the fight against food insecurity and malnutrition. However, fish and fish products are also highly susceptible to contamination by various organic and inorganic compounds that threaten public health. Particularly, heavy metals and biogenic amines (BAs) have shown adverse effects when contaminated fish is consumed, and the effects in children have been worse. Hence, while fish consumption is highly recommended for children's nutrition, the safety and quality of the product should always be checked to safeguard public health.

Dual Transient Networks of Polymer and Micellar Chains: Structure and Viscoelastic Synergy

Dual transient networks were prepared by mixing highly charged long wormlike micelles of surfactants with polysaccharide chains of hydroxypropyl guar above the entanglement concentration for each of the components. The wormlike micelles were composed of two oppositely charged surfactants potassium oleate and n-octyltrimethylammonium bromide with a large excess of anionic surfactant. The system is macroscopically homogeneous over a wide range of polymer and surfactant concentrations, which is attributed to a stabilizing effect of surfactants counterions that try to occupy as much volume as possible in order to gain in translational entropy. At the same time, by small-angle neutron scattering (SANS) combined with ultrasmall-angle neutron scattering (USANS), a microphase separation with the formation of polymer-rich and surfactant-rich domains was detected. Rheological studies in the linear viscoelastic regime revealed a synergistic 180-fold enhancement of viscosity and 65-fold increase of the longest relaxation time in comparison with the individual components. This effect was attributed to the local increase in concentration of both components trying to avoid contact with each other, which makes the micelles longer and increases the number of intermicellar and interpolymer entanglements. The enhanced rheological properties of this novel system based on industrially important polymer hold great potential for applications in personal care products, oil recovery and many other fields.

Supramolecular dynamic binary complexes with pH and salt-responsive properties for use in unconventional reservoirs

Hydraulic fracturing of unconventional reservoirs has seen a boom in the last century, as a means to fulfill the growing energy demand in the world. The fracturing fluid used in the process plays a substantial role in determining the results. Hence, several research and development efforts have been geared towards developing more sustainable, efficient, and improved fracturing fluids. Herein, we present a dynamic binary complex (DBC) solution, with potential to be useful in the hydraulic fracturing domain. It has a supramolecular structure formed by the self-assembly of low molecular weight viscosifiers (LMWVs) oleic acid and diethylenetriamine into an elongated entangled network under alkaline conditions. With less than 2 wt% constituents dispersed in aqueous solution, a viscous gel that exhibits high viscosities even under shear was formed. Key features include responsiveness to pH and salinity, and a zero-shear viscosity that could be tuned by a factor of ~280 by changing the pH. Furthermore, its viscous properties were more pronounced in the presence of salt. Sand settling tests revealed its potential to hold up sand particles for extended periods of time. In conclusion, this DBC solution system has potential to be utilized as a smart salt-responsive, pH-switchable hydraulic fracturing fluid.

Annatto Oil Loaded Nanostructured Lipid Carriers: A Potential New Treatment for Cutaneous Leishmaniasis

Annatto (Bixa orellana L.) is extensively used as food pigment worldwide. Recently, several studies have found it to have healing and antioxidant properties, as well as effective action against leishmaniasis. Therefore, the purpose of this study was to incorporate the oil obtained from annatto seeds into a nanostructured lipid carrier (NLC) and evaluate its physicochemical properties and biological activity against Leishmania major. Nanoparticles were prepared by the fusion-emulsification and ultrasonication method, with the components Synperonic™ PE (PL) as the surfactant, cetyl palmitate (CP) or myristyl myristate (MM) as solid lipids, annatto oil (AO) (2% and 4%, w/w) as liquid lipid and active ingredient, and ultra-pure water. Physicochemical and biological characterizations were carried out to describe the NLCs, including particle size, polydispersity index (PDI), and zeta potential (ZP) by dynamic light scattering (DLS), encapsulation efficiency (EE%), thermal behavior, X-ray diffraction (XRD), transmission electron microscopy (TEM), Electron Paramagnetic Resonance (EPR), cytotoxicity on BALB/c 3T3 fibroblasts and immortalized human keratinocyte cells, and anti-leishmaniasis activity in vitro. Nanoparticles presented an average diameter of ~200 nm (confirmed by TEM results), a PDI of less than 0.30, ZP between -12.6 and -31.2 mV, and more than 50% of AO encapsulated in NLCs. Thermal analyses demonstrated that the systems were stable at high temperatures with a decrease in crystalline structure due to the presence of AOs (confirmed by XRD). In vitro, the anti-leishmania test displayed good activity in encapsulating AO against L. major. The results indicate that the oily fraction of Bixa orellana L. in NLC systems should be evaluated as a potential therapeutic agent against leishmaniasis.

Low-Frequency Sonophoresis as an Active Approach to Potentiate the Transdermal Delivery of Agomelatine-Loaded Novasomes: Design, Optimization, and Pharmacokinetic Profiling in Rabbits

The first melatonergic antidepressant drug, agomelatine (AGM), is commonly used for controlling major depressive disorders. AGM suffers low (< 5%) oral bioavailability owing to the hepatic metabolism. The current work investigated the potential of low-frequency sonophoresis on enhancing transdermal delivery of AGM-loaded novasomes and, hence, bioavailability of AGM. Drug-loaded novasomes were developed using free fatty acid (stearic acid or oleic acid), surfactant (span 60 or span 80), and cholesterol via thin-film hydration technique. The systems (N1-N16) were assessed for zeta potential (ZP), particle size (PS), encapsulation efficiency (EE%), and drug percent released after 0.5 h (Q_0.5 h) and 8 h (Q_8h), drug-crystallinity, morphology, and ex vivo drug permeation. Skin pre-treatment with low-frequency ultrasound (LFU) waves, via N13-novasomal gel systems, was optimized to enhance ex vivo drug permeation. Influences of LFU mode (continuous or pulsed), duty cycle (50% or 100%), and application period (10 or 15 min) were optimized. The pharmacokinetics of the optimized system (N13-LFU-C4) was assessed in rabbits. N13 was the best achieved novasomal system with respect to PS (471.6 nm), ZP (- 63.6 mv), EE% (60.5%), Q_0.5 h (27.8%), Q_8h (83.9%), flux (15.5 μg/cm²/h), and enhancement ratio (6.9). N13-LFU-C4 was the optimized novasomal gel system (desirability; 0.997) which involves skin pre-treatment with LFU in a continuous mode, at 100% duty cycle, for 15 min. Compared to AGM dispersion, the significantly (P < 0.05) higher flux (26.7 μg/cm²/h), enhancement ratio (11.9), C_max (118.23 ng/mL), and relative bioavailability (≈ 8.6 folds) could elucidate the potential of N13-LFU-C4 system in improving transdermal drug permeability and bioavailability.

Improvement of Imiquimod Solubilization and Skin Retention via TPGS Micelles: Exploiting the Co-Solubilizing Effect of Oleic Acid

Imiquimod (IMQ) is an immunostimulant drug approved for the topical treatment of actinic keratosis, external genital-perianal warts as well as superficial basal cell carcinoma that is used off-label for the treatment of different forms of skin cancers, including some malignant melanocytic proliferations such as lentigo maligna, atypical nevi and other in situ melanoma-related diseases. Imiquimod skin delivery has proven to be a real challenge due to its very low water-solubility and reduced skin penetration capacity. The aim of the work was to improve the drug solubility and skin retention using micelles of d-α-tocopheryl polyethylene glycol 1000 succinate (TPGS), a water-soluble derivative of vitamin E, co-encapsulating various lipophilic compounds with the potential ability to improve imiquimod affinity for the micellar core, and thus its loading into the nanocarrier. The formulations were characterized in terms of particle size, zeta potential and stability over time and micelles performance on the skin was evaluated through the quantification of imiquimod retention in the skin layers and the visualization of a micelle-loaded fluorescent dye by two-photon microscopy. The results showed that imiquimod solubility strictly depends on the nature and concentration of the co-encapsulated compounds. The micellar formulation based on TPGS and oleic acid was identified as the most interesting in terms of both drug solubility (which was increased from few µg/mL to 1154.01 ± 112.78 µg/mL) and micellar stability (which was evaluated up to 6 months from micelles preparation). The delivery efficiency after the application of this formulation alone or incorporated in hydrogels showed to be 42- and 25-folds higher than the one of the commercial creams.