Characterization and divalent metal-ion dependence of in vitro selected deoxyribozymes which cleave DNA/RNA chimeric oligonucleotides

XNAzymes targeting the SARS-CoV-2 genome inhibit viral infection

The unprecedented emergence and spread of SARS-CoV-2, the coronavirus responsible for the COVID-19 pandemic, underscores the need for diagnostic and therapeutic technologies that can be rapidly tailored to novel threats. Here, we show that site-specific RNA endonuclease XNAzymes - artificial catalysts composed of single-stranded synthetic xeno-nucleic acid oligonucleotides (in this case 2'-deoxy-2'-fluoro-β-D-arabino nucleic acid) - may be designed, synthesised and screened within days, enabling the discovery of a range of enzymes targeting SARS-CoV-2 ORF1ab, ORF7b, spike- and nucleocapsid-encoding RNA. Three of these are further engineered to self-assemble into a catalytic nanostructure with enhanced biostability. This XNA nanostructure is capable of cleaving genomic SARS-CoV-2 RNA under physiological conditions, and when transfected into cells inhibits infection with authentic SARS-CoV-2 virus by RNA knockdown. These results demonstrate the potential of XNAzymes to provide a platform for the rapid generation of antiviral reagents.

A modular XNAzyme cleaves long, structured RNAs under physiological conditions and enables allele-specific gene silencing

Nucleic-acid catalysts (ribozymes, DNA- and XNAzymes) cleave target (m)RNAs with high specificity but have shown limited efficacy in clinical applications. Here we report on the in vitro evolution and engineering of a highly specific modular RNA endonuclease XNAzyme, FR6_1, composed of 2'-deoxy-2'-fluoro-β-D-arabino nucleic acid (FANA). FR6_1 overcomes the activity limitations of previous DNA- and XNAzymes and can be retargeted to cleave highly structured full-length (>5 kb) BRAF and KRAS mRNAs at physiological Mg2+ concentrations with allelic selectivity for tumour-associated (BRAF V600E and KRAS G12D) mutations. Phosphorothioate-FANA modification enhances FR6_1 biostability and enables rapid KRAS mRNA knockdown in cultured human adenocarcinoma cells with a G12D-allele-specific component provided by in vivo XNAzyme cleavage activity. These results provide a starting point for the development of improved gene-silencing agents based on FANA or other XNA chemistries.

Selection of M2+-independent RNA-cleaving DNAzymes with Sidechains Mimicking Arginine and Lysine

Sequence-specific cleavage of RNA by nucleic acid catalysts in the absence of a divalent metal cation (M 2+ ) has remained an important goal in biomimicry with potential therapeutic applications. Given the lack of functional group diversity in canonical nucleotides, modified nucleotides with amino acid-like side chains were used to enhance self-cleavage rates at a single embedded ribonucleoside site. Previous works relied on three functional groups: an amine, a guanidine and an imidazole ensconced on three different nucleosides. However, to date, few studies have systematically addressed the necessity of all three modifications, as the value of any single modified nucleoside is contextualized at the outset of selection. Herein, we report on the use of only two modified dNTPs, excluding an imidazole, i.e. 5-(3-guanidinoallyl)-2'-dUTP (dU ga TP) and 5-aminoallyl-2'-dCTP (dC aa TP), to select in-vitro self-cleaving DNAzymes that cleave in the absence of M 2+ in a pH-independent fashion. Cleavage shows biphasic kinetics with rate constants that are significantly higher than in unmodified DNAzymes and compare favorably to certain DNAzymes involving an imidazole. This work is the first report of a M2+-independent DNAzyme with two cationic modifications; as such it shows appreciable self-cleaving activity in the absence of an imidazole modification.

Hydrated metal ion as a general acid in the catalytic mechanism of the 8-17 DNAzyme

The RNA-cleaving 8-17 DNAzyme, which is a metalloenzyme that depends on divalent metal ions for its function, is the most studied catalytic DNA in terms of its mechanism. By the end of 2017, a report of the crystal structure of the enzyme-substrate complex in the presence of Pb²⁺ probed some of the previous findings and opened new questions, especially around the participation of the metal ion in the catalytic mechanism and the promiscuity exhibited by the enzyme in terms of the metal cofactor required for catalysis. In this article we explore the role of the divalent metal ion in the mechanism of the 8-17 DNAzyme as a general acid, by measuring the influence of pH over the activity of a slower variant of the enzyme in the presence of Pb²⁺. We replaced G14, which has been identified as a general base in the mechanism of the enzyme, by the unnatural analog 2-aminopurine, with a lower pK_a value of the N1 group. With this approach, we obtained a bell-shaped pH-rate profile with experimental pK_a values of 5.4 and 7.0. Comparing these results with previous pH-rate profiles in the presence of Mg²⁺, our findings suggest the stabilization of the 5'-O leaving group by the hydrated metal ion acting as a general acid, in addition to the activation of the 2'-OH nucleophile by the general base G14.

A new Pb2+-specific DNAzyme by revisiting the catalytic core of 10-23 DNAzyme

10-23 DNAzyme is a catalytic DNA molecule from in vitro selection, the 15-mer catalytic core was investigated for more DNAzyme variants by block deletions. DNAzyme DZM01 was selected with metal ion dependence of Pb²⁺ ≫ Mn²⁺, with no activity in the presence of Mg²⁺ (20 mM), Ca²⁺ (20 mM), Zn²⁺ (20 mM, pH 6). The unique binding properties of Pb²⁺ with nucleic acids might be responsible for the formation of the catalytic core, which is different from that of other divalent metal ions. More DNAzyme variants are expected to be derived for specific metal ion dependence by various nucleobase sequences and modifications.

Characterization of a DNA-hydrolyzing DNAzyme for generation of PCR strands of unequal length

I-R3 DNAzyme is a small, highly active catalytic DNA for DNA hydrolysis. In here, we designed two cis-structure DNAzymes (I-R3N and I-R3S) based on the different locates of the joint linker between I-R3 and its substrate. Data demonstrated that both DNAzymes were highly dependent on Zn²⁺, and worked at a narrow range around pH 7.0. They exhibited strong anti-interference with Mg²⁺ and Ca²⁺, but inhibited by Na⁺ and K⁺. Moreover, single and multiple-site mutations were generated within the catalytic core to carry out a comprehensive mutational study of I-R3 motif, in which most nucleotides were highly conserved and the nucleotides A5, T11 and T8 were identified as the mutational hotspots. Furthermore, an efficient variant A5G was obtained and its reaction condition was optimized. Finally, we constructed A5G to the 3' end of a single-stranded DNA (ssDNA) and applied it for asymmetrical PCR amplification to produce a single and double-stranded DNA mixture, in which A5G within ssDNA can self-cleave to generate a shorter desired ssDNA by denaturing gel separation. This would provide a new non-chemical modification approach for preparation of the expected ssDNA for in vitro selection of DNAzymes.

Insights into DNA catalysis from structural and functional studies of the 8-17 DNAzyme

The review examines functional knowledge gathered over two decades of research on the 8-17 DNAzyme, focusing on three aspects: the structural requirements for catalysis, the role of metal ions and the participation of general acid-base catalysis.

Evaluating the Catalytic Potential of a General RNA-Cleaving FANA Enzyme

The discovery of synthetic genetic polymers (XNAs) with catalytic activity demonstrates that natural genetic polymers are not unique in their ability to function as enzymes. However, all known examples of in vitro selected XNA enzymes function with lower activity than their natural counterparts, suggesting that XNAs might be limited in their ability to fold into structures with high catalytic activity. To explore this problem, we evaluated the catalytic potential of FANAzyme 12-7, an RNA-cleaving catalyst composed entirely of 2'-fluoroarabino nucleic acid (FANA) that was evolved to cleave RNA at a specific phosphodiester bond located between an unpaired guanine and a paired uracil in the substrate recognition arm. Here, we show that this activity extends to chimeric DNA substrates that contain a central riboguanosine (riboG) residue at the cleavage site. Surprisingly, FANAzyme 12-7 rivals known DNAzymes that were previously evolved to cleave chimeric DNA substrates under physiological conditions. These data provide convincing evidence that FANAzyme 12-7 maintains the catalytic potential of equivalent DNAzymes, which has important implications for the evolution of XNA catalysts and their contributions to future applications in synthetic biology.

Orthogonal Activation of RNA-Cleaving DNAzymes in Live Cells by Reactive Oxygen Species

RNA-cleaving DNAzymes are useful tools for intracellular metal-ion sensing and gene regulation. Incorporating stimuli-responsive modifications into these DNAzymes enables their activities to be spatiotemporally and chemically controlled for more precise applications. Despite the successful development of many caged DNAzymes for light-induced activation, DNAzymes that can be intracellularly activated by chemical inputs of biological importance, such as reactive oxygen species (ROS), are still scarce. ROS like hydrogen peroxide (H₂ O₂ ) and hypochlorite (HClO) are critical mediators of oxidative stress-related cell signaling and dysregulation including activation of immune system as well as progression of diseases and aging. Herein, we report ROS-activable DNAzymes by introducing phenylboronate and phosphorothioate modifications to the Zn²⁺ -dependent 8-17 DNAzyme. These ROS-activable DNAzymes were orthogonally activated by H₂ O₂ and HClO inside live human and mouse cells.

Enhancing Catalytic Activity of Uranyl-Dependent DNAzyme by Flexible Linker Insertion for More Sensitive Detection of Uranyl Ion

The uranyl-dependent DNAzyme 39E cleaves its nucleic acid substrate in the presence of uranyl ion (UO₂²⁺). It has been widely utilized in many sensor designs for selective and sensitive detection of UO₂²⁺ in the environment and inside live cells. In this work, by inserting a flexible linker (C3 Spacer) into one critical site (A₂₀) of the 39E catalytic core, we successfully enhanced the original catalytic activity of 39E up to 8.1-fold at low UO₂²⁺ concentrations. Applying such a modified DNAzyme (39E-A₂₀-C3) in a label-free fluorescent sensor for UO₂²⁺ detection achieved more than 1 order of magnitude sensitivity enhancement over using native 39E, with the UO₂²⁺ detection limit improved from 2.6 nM (0.63 ppb) to 0.19 nM (0.047 ppb), while the high selectivity to UO₂²⁺ over other metal ions was fully preserved. The method was also successfully applied for the detection of UO₂²⁺-spiked environmental water samples to demonstrate its practical usefulness.

Nucleic acids: function and potential for abiogenesis

The emergence of functional cooperation between the three main classes of biomolecules - nucleic acids, peptides and lipids - defines life at the molecular level. However, how such mutually interdependent molecular systems emerged from prebiotic chemistry remains a mystery. A key hypothesis, formulated by Crick, Orgel and Woese over 40 year ago, posits that early life must have been simpler. Specifically, it proposed that an early primordial biology lacked proteins and DNA but instead relied on RNA as the key biopolymer responsible not just for genetic information storage and propagation, but also for catalysis, i.e. metabolism. Indeed, there is compelling evidence for such an 'RNA world', notably in the structure of the ribosome as a likely molecular fossil from that time. Nevertheless, one might justifiably ask whether RNA alone would be up to the task. From a purely chemical perspective, RNA is a molecule of rather uniform composition with all four bases comprising organic heterocycles of similar size and comparable polarity and pK a values. Thus, RNA molecules cover a much narrower range of steric, electronic and physicochemical properties than, e.g. the 20 amino acid side-chains of proteins. Herein we will examine the functional potential of RNA (and other nucleic acids) with respect to self-replication, catalysis and assembly into simple protocellular entities.

Systematic study of constraints imposed by modified nucleoside triphosphates with protein-like side chains for use in in vitro selection

Successful selection of modified DNAzymes depends on the potential for modified nucleoside triphosphates (dNTPs) to replace their unmodified counterparts in enzyme catalyzed primer extension reactions and, once incorporated, to serve as template bases for information transfer prior to PCR amplification. To date, the most densely modified DNAzymes have been selected from three modified dNTPs: 8-histaminyl-deoxyadenosine (dA^imTP), 5-guanidinoallyl-deoxyuridine (dU^gaTP), and 5-aminoallyl-deoxycytidine (dC^aaTP) to provide several RNA-cleaving DNAzymes with greatly enhanced rate constants compared to unmodified counterparts. Here we report biophysical and enzymatic properties of these three modified nucleosides in the context of specific oligonucleotide sequences to understand how these three modified nucleobases function in combinatorial selection. The base-pairing abilities of oligonucleotides bearing one or three modified nucleosides were investigated by thermal denaturation studies and as templates for enzymatic polymerization with both modified and unmodified dNTPs. While we address certain shortcomings in the use of modified dNTPs, we also provide key evidence of faithful incorporation and enzymatic read-out, which strongly supports their continued use in in vitro selection.

Evidence of a General Acid-Base Catalysis Mechanism in the 8-17 DNAzyme

DNAzymes are catalytic DNA molecules that can perform a variety of reactions. Although advances have been made in obtaining DNAzymes via in vitro selection and many of them have been developed into sensors and imaging agents for metal ions, bacteria, and other molecules, the structural features responsible for these enzymatic reactions are still not well understood. Previous studies of the 8-17 DNAzyme have suggested conserved guanines close to the phosphodiester transfer site may play a role in the catalytic reaction. To identify the specific guanine and functional group of the guanine responsible for the reaction, we herein report the effects of replacing G1.1 and G14 (G; p Ka,N1 = 9.4) with analogues with a different p Ka at the N1 position, such as inosine (G14I; p Ka,N1 = 8.7), 2,6-diaminopurine (G14diAP; p Ka,N1 = 5.6), and 2-aminopurine (G14AP; p Ka,N1 = 3.8) on pH-dependent reaction rates. A comparison of the pH dependence of the reaction rates of these DNAzymes demonstrated that G14 in the bulge loop next to the cleavage site, is involved in proton transfer at the catalytic site. In contrast, we did not find any evidence of G1.1 being involved in acid-base catalysis. These results support general acid-base catalysis as a feasible strategy used in DNA catalysis, as in RNA and protein enzymes.

A densely modified M2+-independent DNAzyme that cleaves RNA efficiently with multiple catalytic turnover

Sequence-specific cleavage of RNA targets in the absence of a divalent metal cation (M²⁺) has been a long-standing goal in bioorganic chemistry. Herein, we report the in vitro selection of novel RNA cleaving DNAzymes that are selected using 8-histaminyl-deoxyadenosine (dA^imTP), 5-guanidinoallyl-deoxyuridine (dU^gaTP), and 5-aminoallyl-deoxycytidine (dC^aaTP) along with dGTP. These modified dNTPs provide key functionalities reminiscent of the active sites of ribonucleases, notably RNase A. Of several such M²⁺-free DNAymes, DNAzyme 7-38-32 cleaves a 19 nt all-RNA substrate with multiple-turnover, under simulated physiological conditions wherein only 0.5 mM Mg²⁺ was present, attaining values of k_cat of 1.06 min^-1 and a K_M of 1.37 μM corresponding to a catalytic efficiency of ∼10⁶ M^-1 min^-1. Therefore, Dz7-38-32 represents a promising candidate towards the development of therapeutically efficient DNAzymes.

Site-Specific Self-Catalyzed DNA Depurination: A Biological Mechanism That Leads to Mutations and Creates Sequence Diversity

Self-catalyzed DNA depurination is a sequence-specific physiological mechanism mediated by spontaneous extrusion of a stem-loop catalytic intermediate. Hydrolysis of the 5'G residue of the 5'GA/TGG loop and of the first 5'A residue of the 5'GAGA loop, together with particular first stem base pairs, specifies their hydrolysis without involving protein, cofactor, or cation. As such, this mechanism is the only known DNA catalytic activity exploited by nature. The consensus sequences for self-depurination of such G- and A-loop residues occur in all genomes examined across the phyla, averaging one site every 2,000-4,000 base pairs. Because apurinic sites are subject to error-prone repair, leading to substitution and short frameshift mutations, they are both a source of genome damage and a means for creating sequence diversity. Their marked overrepresentation in genomes, and largely unchanging density from the lowest to the highest organisms, indicate their selection over the course of evolution. The mutagenicity at such sites in many human genes is associated with loss of function of key proteins responsible for diverse diseases.

The Optimization and Characterization of an RNA-Cleaving Fluorogenic DNAzyme Probe for MDA-MB-231 Cell Detection

Breast cancer is one of the most frequently diagnosed cancers in females worldwide and lacks specific biomarkers for early detection. In a previous study, we obtained a selective RNA-cleaving Fluorogenic DNAzyme (RFD) probe against MDA-MB-231 cells, typical breast cancer cells, through the systematic evolution of ligands by exponential process (SELEX). To improve the performance of this probe for actual application, we carried out a series of optimization experiments on the pH value of a reaction buffer, the type and concentration of cofactor ions, and sequence minimization. The length of the active domain of the probe reduced to 25 nt from 40 nt after optimization, which was synthesized more easily and economically. The detection limit of the optimized assay system was 2000 MDA-MB-231 cells in 30 min, which is more sensitive than the previous one (almost 5000 cells). The DNAzyme probe was also capable of distinguishing MDA-MB-231 cell specifically from 3 normal cells and 10 other tumor cells. This probe with high sensitivity, selectivity, and economic efficiency enhances the feasibility for further clinical application in breast cancer diagnosis. Herein, we developed an optimization system to produce a general strategy to establish an easy-to-use DNAzyme-based assay for other targets.

DNA Catalysis: The Chemical Repertoire of DNAzymes

Deoxyribozymes or DNAzymes are single-stranded catalytic DNA molecules that are obtained by combinatorial in vitro selection methods. Initially conceived to function as gene silencing agents, the scope of DNAzymes has rapidly expanded into diverse fields, including biosensing, diagnostics, logic gate operations, and the development of novel synthetic and biological tools. In this review, an overview of all the different chemical reactions catalyzed by DNAzymes is given with an emphasis on RNA cleavage and the use of non-nucleosidic substrates. The use of modified nucleoside triphosphates (dN*TPs) to expand the chemical space to be explored in selection experiments and ultimately to generate DNAzymes with an expanded chemical repertoire is also highlighted.

Identification of the Same Na(+)-Specific DNAzyme Motif from Two In Vitro Selections Under Different Conditions

We report an investigation of the functional relationship between two independently selected RNA-cleaving DNAzymes, NaA43, and Ce13, through in vitro selection. The NaA43 DNAzyme was obtained through a combination of gel-based and column-based in vitro selection in the presence of Na(+) and reported to be highly selective for Na(+) over other metal ions. The Ce13 DNAzyme was isolated via a gel-based method in the presence of Ce(4+) and found to be active with trivalent lanthanides, Y(3+) and Pb(2+). Despite completely different activities reported for the two DNAzymes, they share a high level of sequence similarity (~60% sequence identity). In this work, we systematically analyzed the activity of both DNAzymes to elucidate their potential functional relationship. We found that Na(+) is an obligate cofactor of the Ce13 DNAzyme and lanthanides cannot initiate the cleavage reaction in the absence of Na(+). Hence, we conclude that the Ce13 DNAzyme is a variant of the NaA43 DNAzyme that catalyzes reaction in the presence Na(+) and also utilizes lanthanides in a potentially allosteric manner. These results have identified a new DNAzyme motif that is not only remarkably Na(+)-specific, but also allows for design of novel allosteric DNAzymes for different biotechnological applications.

An aptamer-based single particle method for sensitive detection of thrombin using fluorescent quantum dots as labeling probes

In this study, an aptamer-based single particle method was developed for the thrombin detection in human serum samples using fluorescence correlation spectroscopy (FCS). In this method, quantum dots (QDs) were used as the fluorescent probes and thrombin-binding aptamer (TBA) was used as molecular recognition unit. When two QDs probes labeled with TBA (QD-TBA1 and QD-TBA2) are mixed in a sample containing thrombin targets, the binding of targets will cause QDs to form dimers (or oligomers) with bigger sizes, which leads to the nearly double increase in the characteristic diffusion time of QDs in the detection volume of FCS. FCS method can detect the change in the characteristic diffusion time of QDs. Firstly, the diffusion and blinking behaviors of QD-TBA probes in the presence of thrombin were investigated by FCS and total internal reflection fluorescence microscopy (TIRFM) imaging system, and the experimental results documented that QD-TBAs were bound together with "one-by-one" structure when thrombin were added into the solution. And then, the assay conditions were optimized in order to improve the sensitivity and specificity of this method. Under the optimized conditions, the linear range of the method is from 5.0 nM to 500 nM of thrombin, and the limit of detection is about 2.6 nM. Finally, this method was applied to homogeneous determination of thrombin in human serum samples.

In vitro selection of a sodium-specific DNAzyme and its application in intracellular sensing

Over the past two decades, enormous progress has been made in designing fluorescent sensors or probes for divalent metal ions. In contrast, the development of fluorescent sensors for monovalent metal ions, such as sodium (Na(+)), has remained underdeveloped, even though Na(+) is one the most abundant metal ions in biological systems and plays a critical role in many biological processes. Here, we report the in vitro selection of the first (to our knowledge) Na(+)-specific, RNA-cleaving deoxyribozyme (DNAzyme) with a fast catalytic rate [observed rate constant (ko(bs)) ∼ 0.1 min(-1)], and the transformation of this DNAzyme into a fluorescent sensor for Na(+) by labeling the enzyme strand with a quencher at the 3' end, and the DNA substrate strand with a fluorophore and a quencher at the 5' and 3' ends, respectively. The presence of Na(+) catalyzed cleavage of the substrate strand at an internal ribonucleotide adenosine (rA) site, resulting in release of the fluorophore from its quenchers and thus a significant increase in fluorescence signal. The sensor displays a remarkable selectivity (>10,000-fold) for Na(+) over competing metal ions and has a detection limit of 135 µM (3.1 ppm). Furthermore, we demonstrate that this DNAzyme-based sensor can readily enter cells with the aid of α-helical cationic polypeptides. Finally, by protecting the cleavage site of the Na(+)-specific DNAzyme with a photolabile o-nitrobenzyl group, we achieved controlled activation of the sensor after DNAzyme delivery into cells. Together, these results demonstrate that such a DNAzyme-based sensor provides a promising platform for detection and quantification of Na(+) in living cells.

In vitro selection using modified or unnatural nucleotides

Incorporation of modified nucleotides into in vitro RNA or DNA selections offers many potential advantages, such as the increased stability of selected nucleic acids against nuclease degradation, improved affinities, expanded chemical functionality, and increased library diversity. This unit provides useful information and protocols for in vitro selection using modified nucleotides. It includes a discussion of when to use modified nucleotides; protocols for evaluating and optimizing transcription reactions, as well as confirming the incorporation of the modified nucleotides; protocols for evaluating modified nucleotide transcripts as template in reverse transcription reactions; protocols for the evaluation of the fidelity of modified nucleotides in the replication and the regeneration of the pool; and a protocol to compare modified nucleotide pools and selection conditions.

Toward the combinatorial selection of chemically modified DNAzyme RNase A mimics active against all-RNA substrates

The convenient use of SELEX and related combinatorial methods of in vitro selection provides a formidable gateway for the generation of DNA enzymes, especially in the context of improving their potential as gene therapeutic agents. Here, we report on the selection of DNAzyme 12-91, a modified nucleic acid catalyst adorned with imidazole, ammonium, and guanidinium groups that provide for efficient M(2+)-independent cleavage of an all-RNA target sequence (kobs = 0.06 min(-1)). While Dz12-91 was selected for intramolecular cleavage of an all-RNA target, it surprisingly cleaves a target containing a lone ribocytosine unit with even greater efficiency (kobs = 0.27 min(-1)) than Dz9-86 (kobs = 0.13 min(-1)). The sequence composition of Dz12-91 bears a marked resemblance to that of Dz9-86 (kobs = 0.0014 min(-1) with an all-RNA substrate) that was selected from the same library to cleave a target containing a single ribonucleotide. However, small alterations in the sequence composition have a profound impact on the substrate preference and catalytic properties. Indeed, Dz12-91 displays the highest known rate enhancement for the M(2+)-independent cleavage of all-RNA targets. Hence, Dz12-91 represents a step toward the generation of potentially therapeutically active DNAzymes and further underscores the usefulness of modified triphosphates in selection experiments.

8-17 DNAzyme modified with purine analogs in its catalytic core: the conservation of the five-membered moieties of purine residues

8-17 DNAzyme is characterized by its recurrence in different in vitro selections and versatile cleavage sites, leading to extensive studies on its structural properties and applications. We evaluated the purine residues (A6, G7, G11, A12, G14, and A15) in the catalytic core of 8-17 DNAzyme of their five-membered ring moiety with purine analogs 1-5 to have an insight into the conservation of the residues at the level of functional groups. The 7-nitrogen atom in the AGC loop was demonstrated to be strictly conserved for the cleavage reaction. But such modifications exerted favorable effect at G11 of the base-pair stem and A12 in the single-strand loop, directing toward more efficient DNAzymes. Even the most conserved G14 could tolerate such modifications. These results demonstrated that chemical modification on the functional groups is a feasible approach to gain an insight into the structural requirement in the catalytic reaction of DNAzymes. It also provided modification sites for introduction of signaling molecules used for mechanistic and folding studies of 8-17 DNAzyme.

Protein-inspired modified DNAzymes: dramatic effects of shortening side-chain length of 8-imidazolyl modified deoxyadenosines in selecting RNaseA mimicking DNAzymes

The discovery of imidazole/amine-functionalized DNAzymes that efficiently cleave RNA independently of divalent metal cations (M(2+)) and cofactors underscores the importance of expanding the catalytic repertoire with modified nucleosides. Considerable effort has gone into defining polymerase tolerances of various modified dNTPs for synthesizing and amplifying modified DNA. While long linkers are generally found to enhance incorporation and therefore increase sequence space, shorter linkers may reduce the entropic penalty paid for orienting catalytic functionality. Catalytic enhancement ultimately depends on both the functional group and appropriate linkage to the nucleobase. Whether a shorter linker provides enough catalytic enhancement to outweigh the cost of reduced polymerizability can only be determined by the outcome of the selection. Herein, we report the selection of DNAzyme 20-49 (Dz20-49), which depends on amine, guanidine, and imidazole-modified dNTPs. In contrast to previous selections where we used dA(ime)TP (8-(4-imidazolyl)ethylamino-2'-dATP), here we used dA(imm)TP (8-(4-imidazolyl)methylamino-2'-dATP), in which the linker arm is shortened by one methylene group. Although the most active clone, Dz20-49, was absolutely dependent on the incorporation of either dA(imm)p or dA(ime)p, it catalyzed cofactor independent self-cleavage with a rate constant of 3.1 ± 0.3 × 10(-3) min(-1), a value not dissimilar from unmodified catalysts and strikingly inferior to modified catalysts selected with dA(ime)TP. These results demonstrate that very subtle differences in modified nucleotide composition may dramatically effect DNAzyme selection.

Inhibition of human papillomavirus expression using DNAzymes

Deoxyribozymes (DXZs) are catalytic oligodeoxynucleotides capable of performing diverse functions including the specific cleavage of a target RNA. These molecules represent a new type of therapeutic oligonucleotides combining the efficiency of ribozymes and the intracellular endurance and simplicity of modified antisense oligonucleotides. Commonly used DXZs include the 8-17 and 10-23 motifs, which have been engineered to destroy disease-associated genes with remarkable efficiency. Targeting DXZs to disease-associated transcripts requires extensive biochemical testing to establish target RNA accessibility, catalytic efficiency, and nuclease sensibility. The usage of modified nucleotides to render nuclease-resistance DXZs must be counterweighted against deleterious consequences on catalytic activity. Further intracellular testing is required to establish the effect of microenvironmental conditions on DXZ activity and off-target issues. Application of modified DXZs to cervical cancer results in specific growth inhibition, cell death, and apoptosis. Thus, DXZs represent a highly effective antisense moiety with minimal secondary effects.

Activity, folding and Z-DNA formation of the 8-17 DNAzyme in the presence of monovalent ions

The effect of monovalent ions on both the reactivity and global folding of the 8-17 DNAzyme is investigated, and the results are compared with those of the hammerhead ribozyme, which has similar size and secondary structure. In contrast to the hammerhead ribozyme, the 8-17 DNAzyme activity is not detectable in the presence of 4 M K(+), Rb(+), or Cs(+) or in the presence of 80 mM, [Co(NH(3))(6)](3+). Only 4 M Li(+), NH(4)(+) and, to a lesser extent, Na(+) conferred detectable activity. The observed rate constants (k(obs) approximately 10(-3) min(-1) for Li(+) and NH(4)(+)) are approximately 1000-fold lower than that in the presence of 10 mM Mg(2+), and approximately 200,000-fold slower than that in the presence of 100 microM Pb(2+). Since the hammerhead ribozyme displays monovalent ion-dependent activity that is often within approximately 10-fold of divalent metal ion-dependent activity, these results suggest that the 8-17 DNAzyme, obtained by in vitro selections, has evolved to have a more stringent divalent metal ion requirement for high activity as compared to the naturally occurring ribozymes, making the 8-17 DNAzyme an excellent choice as a Pb(2+) sensor with high selectivity. In contrast to the activity data, folding was observed in the presence of all the monovalent ions investigated, although those monovalent ions that do not support DNAzyme activity have weaker binding affinity (K(d) approximately 0.35 M for Rb(+) and Cs(+)), while those that confer DNAzyme activity possess stronger affinity (K(d) approximately 0.22 M for Li(+), Na(+) and NH(4)(+)). In addition, a correlation between metal ion charge density, binding affinity and enzyme activity was found among mono- and divalent metal ions except Pb(2+); higher charge density resulted in stronger affinity and higher activity, suggesting that the observed folding and activity is at least partially due to electrostatic interactions between ions and the DNAzyme. Finally, circular dichroism (CD) study has revealed Z-DNA formation with the monovalent metal ions, Zn(2+) and Mg(2+); the K(d) values obtained using CD were in the same range as those obtained from folding studies using FRET. However, Z-DNA formation was not observed with Pb(2+). These results indicate that Pb(2+)-dependent function follows a different mechanism from the monovalent metal ions and other divalent metal ions; in the presence of latter metal ions, metal-ion dependent folding and structural changes, including formation of Z-DNA, play an important role in the catalytic function of the 8-17 DNAzyme.

A highly selective lead sensor based on a classic lead DNAzyme

A catalytic beacon sensor for Pb(2+) has been developed based on the first DNAzyme discovered in the field, and such a sensor has shown a much higher metal ion selectivity (40,000 times) than the previously reported Pb(2+) sensor based on 8-17 DNAzyme and thus is suitable for a wider range of practical applications.

The use of 10-23 DNAzyme to selectively destroy the allele of mRNA with a unique purine-pyrimidine dinucleotide

10-23 DNAzyme is an oligodeoxyribonucleotide-based ribonuclease. It consists of a 15-nt catalytic domain flanked by two target-specific complementary arms. It has been shown to cleave target mRNA effectively at purine (R)-pyrimidine (Y) dinucleotide. Taking advantage of this specific property, 10-23 DNAzyme was designed to cleave mRNA of a given allele at a unique RY dinucleotide while leaving the mRNA encoded from other alleles of the same gene intact. In this study, a p53-R249S (AGG-->AGT) mutant was tested. 10-23 DNAzyme was used to cut mutant mRNA at GT dinucleotide of codon 249. Both in vitro and in vivo studies showed that this DNAzyme could specifically cut the mutant p53 allele, leaving the wild-type unaffected. This proof-of-concept experiment provided a new way to knock down expression of a given allele with special single-base transversion.

A self-cleaving DNA enzyme modified with amines, guanidines and imidazoles operates independently of divalent metal cations (M2+)

The selection of modified DNAzymes represents an important endeavor in expanding the chemical and catalytic properties of catalytic nucleic acids. Few examples of such exist and to date, there is no example where three different modified bases have been simultaneously incorporated for catalytic activity. Herein, dCTP, dATP and dUTP bearing, respectively, a cationic amine, an imidazole and a cationic guanidine, were enzymatically polymerized on a DNA template for the selection of a highly functionalized DNAzyme, called DNAzyme 9-86, that catalyzed (M(2+))-independent self-cleavage under physiological conditions at a single ribo(cytosine)phosphodiester linkage with a rate constant of (0.134 +/- 0.026) min(-1). A pH rate profile analysis revealed pK(a)'s of 7.4 and 8.1, consistent with both general acid and base catalysis. The presence of guanidinium cations permits cleavage at significantly higher temperatures than previously observed for DNAzymes with only amines and imidazoles. Qualitatively, DNAzyme 9-86 presents an unprecedented ensemble of synthetic functionalities while quantitatively it expresses one of the highest reported values for any self-cleaving nucleic acid when investigated under M(2+)-free conditions at 37 degrees C.

Catalytic DNAzymes: derivations and functions

BACKGROUND

Although catalytic RNA enzymes (CRzs) are naturally occurring in many organisms, their DNA counterparts (CDzs) were developed by in vitro selection/evolution from random sequence libraries.

OBJECTIVE

To provide a brief overview of how CDzs have been selected in vitro, and of their properties and functions, as well as their possible future utility.

METHODS

We concentrated on examples of 'direct' selection of CDzs. Many CDzs have been used in biological settings, for example downregulation of target mRNAs, while many more recent applications use CDzs in biosensor and nanotechnology settings.

CONCLUSIONS

Although much work has concentrated on using CDzs for regulating gene expression, their potential as nucleic acid medicines has diminished substantially, supplanted by simple antisense oligonucleotides and, more recently, by small interfering RNAs (siRNAs). It seems unlikely that CDzs will have clinical utility. In contrast, they are likely to have significant potential in the sensor/nanotechnology arena.

Catalytic DNA (deoxyribozymes) for synthetic applications-current abilities and future prospects

The discovery of naturally occurring catalytic RNA (RNA enzymes, or ribozymes) in the 1980s immediately revised the view of RNA as a passive messenger that solely carries information from DNA to proteins. Because DNA and RNA differ only by the absence or presence of a 2'-hydroxyl group on each ribose ring of the polymer, the question of 'catalytic DNA?' arises. Although no natural DNA catalysts have been reported, since 1994 many artificial DNA enzymes, or 'deoxyribozymes', have been described. Deoxyribozymes offer insight into the mechanisms of natural and artificial ribozymes. DNA enzymes are also used as tools for in vitro and in vivo biochemistry, and they are key components of analytical sensors. This review focuses primarily on catalytic DNA for synthetic applications. Broadly defined, deoxyribozymes may have the greatest potential for catalyzing reactions in which the high selectivities of 'enzymes' are advantageous relative to traditional small-molecule catalysts. Although the scope of DNA-catalyzed synthesis is currently limited in most cases to oligonucleotide substrates, recent efforts have began to expand this frontier in promising new directions.

A contact photo-cross-linking investigation of the active site of the 8-17 deoxyribozyme

The small RNA-cleaving 8-17 deoxyribozyme (DNAzyme) has been the subject of extensive mechanistic and structural investigation, including a number of recent single-molecule studies of its global folding. Little detailed insight exists, however, into this DNAzyme's active site; for instance, the identity of specific nucleotides that are proximal to or in contact with the scissile site in the substrate. Here, we report a systematic replacement of a number of bases within the magnesium-folded DNAzyme-substrate complex with thio- and halogen-substituted base analogues, which were then photochemically activated to generate contact cross-links within the complex. Mapping of the cross-links revealed a striking pattern of DNAzyme-substrate cross-links but an absence of significant intra-DNAzyme cross-links. Notably, the two nucleotides directly flanking the scissile phosphodiester cross-linked strongly with functionally important elements within the DNAzyme, the thymine of a G.T wobble base pair, a WCGR bulge loop, and a terminal AGC loop. Mutation of the wobble base pair to a G-C pair led to a significant folding instability of the DNAzyme-substrate complex. The cross-linking patterns obtained were used to generate a model for the DNAzyme's active site that had the substrate's scissile phosphodiester sandwiched between the DNAzyme's wobble thymine and its AGC and WCGR loops.

Chemoselective nanowire fuses: chemically induced cleavage and electrical detection of carbon nanofiber bridges

A new type of nanoscale bioswitch based on the electrical detection of chemically induced cleavage of chemical bonds, which bind individual nanowires across a pair of electrodes is demonstrated. Carbon nanofibers are manipulated using dielectrophoresis to form single-nanowire bridges across microelectrode junctions, and are anchored through a biomolecular interaction. Once in place, chemically induced cleavage of a recognition site along the bonds linking the nanowire to the electrodes allows the nanowire to be easily removed by a flow of fluid; this removal can be detected in real time via changes in the AC electrical response. This form of sensing is inherently digital in nature as the removal of a single nanowire produces a sudden decrease in the current between electrodes and is essentially a chemoselective fuse. These results suggest that this sensing principle could be a general method for digital chemical and/or biological sensing using individual nanowires.

In vitro selection using modified or unnatural nucleotides

The use of modified nucleotides in an RNA or DNA pool to be used for in vitro selection offers many potential advantages, such as the increased stability of the selected nucleic acid against nuclease degradation. This unit provides useful information and protocols for in vitro selection using modified nucleotides. It includes a discussion of when to use modified nucleotides; protocols for preparing a modified RNA pool and verifying its suitability for in vitro selection; and protocols for selecting and amplifying a functionally enriched pool.

Kinetic characterization of a cis- and trans-acting M2+-independent DNAzyme that depends on synthetic RNaseA-like functionality — Burst-phase kinetics from the coalescence of two active DNAzyme folds

This work describes the kinetics of the DNAzyme 925-11, a combinatorially selected, M2+-independent ribophosphodiesterase that is covalently modified with both cationic amines and imidazoles. At 13 °C, cis- and trans-cleaving constructs of 925-11 demonstrate the highest rate constants reported to date for any M2+-independent nucleic acid catalyst, investigated at physiological ionic strength and pH 7.5 (0.3 min–1for self cleavage and 0.2 min–1for intermolecular cleavage). In contrast to the cis-cleaving species, single-turnover experiments with the trans-cleaving species exhibit biphasic cleavage data, suggesting the presence of two conformations of the catalyst–substrate complex. Pulse–chase experiments demonstrate that both complexes lead to substrate cleavage. Under multiple-turnover conditions, the higher rate constant appears in a burst phase that decays to a slower steady state exhibiting a rate constant of 0.0077 min–1, a value approximating that of the slow-cleaving phase seen in single-turnover experiments. Slow product release is excluded as the source of the burst phase. An integrated rate equation is derived to describe burst-phase kinetics based on the funneling of the initial population of fast-cleaving conformation into a steady-state population composed largely of the slow-cleaving conformation.Key words: RNase mimics, DNAzymes, ribozymes, kinetics, RNA cleavage.

Mapping of the functional phosphate groups in the catalytic core of deoxyribozyme 10-23

The RNA phosphodiester bond cleavage activity of a series of 16 thio-deoxyribozymes 10-23, containing a P-stereorandom single phosphorothioate linkage in predetermined positions of the catalytic core from P1 to P16, was evaluated under single-turnover conditions in the presence of either 3 mM Mg(2+) or 3 mM Mn(2+). A metal-specificity switch approach permitted the identification of nonbridging phosphate oxygens (proR(P) or proS(P)) located at seven positions of the core (P2, P4 and P9-13) involved in direct coordination with a divalent metal ion(s). By contrast, phosphorothioates at positions P3, P6, P7 and P14-16 displayed no functional relevance in the deoxyribozyme-mediated catalysis. Interestingly, phosphorothioate modifications at positions P1 or P8 enhanced the catalytic efficiency of the enzyme. Among the tested deoxyribozymes, thio-substitution at position P5 had the largest deleterious effect on the catalytic rate in the presence of Mg(2+), and this was reversed in the presence of Mn(2+). Further experiments with thio-deoxyribozymes of stereodefined P-chirality suggested direct involvement of both oxygens of the P5 phosphate and the proR(P) oxygen at P9 in the metal ion coordination. In addition, it was found that the oxygen atom at C6 of G(6) contributes to metal ion binding and that this interaction is essential for 10-23 deoxyribozyme catalytic activity.