Unfolding pathway of the colicin E1 channel protein on a membrane surface

In Situ Electrochemical and PM-IRRAS Studies of Colicin E1 Ion Channels in the Floating Bilayer Lipid Membrane

Colicin E1 is a channel-forming bacteriocin produced by certain Escherichia coli cells in an effort to reduce competition from other bacterial strains. The colicin E1 channel domain was incorporated into a 1,2-diphytanoyl- sn-glycero-3-phosphocholine floating bilayer situated on a 1-thio-?-d-glucose-modified gold (111) surface. The electrochemical properties of the colicin E1 channel in the floating bilayer were measured by electrochemical impedance spectroscopy; the configuration and orientation of colicin E1 in the bilayer were determined by polarization-modulation-infrared-reflection absorption spectroscopy. The EIS and IR results indicate that colicin E1 adopts a closed-channel state at the positive transmembrane potential, leading to high membrane resistance and a large tilt angle of ?-helices. When the transmembrane potential becomes negative, colicin E1 begins to insert into the lipid bilayer, corresponding to low membrane resistance and a low tilt angle of ?-helices. The insertion of colicin E1 into the lipid bilayer is driven by the negative transmembrane potential, and the ion-channel open and closed states are potential reversible. The data in this report provide new insights into the voltage-gated mechanism of colicin E1 ion channels in phospholipid bilayers and illustrate that the floating bilayer lipid membrane at the metal electrode surface is a robust platform to study membrane-active proteins and peptides in a quasi-natural environment.

On mechanisms of colicin import: the outer membrane quandary

Current problems in the understanding of colicin import across the Escherichia coli outer membrane (OM), involving a range of cytotoxic mechanisms, are discussed: (I) Crystal structure analysis of colicin E3 (RNAase) with bound OM vitamin B₁₂ receptor, BtuB, and of the N-terminal translocation (T) domain of E3 and E9 (DNAase) inserted into the OM OmpF porin, provide details of the initial interaction of the colicin central receptor (R)- and N-terminal T-domain with OM receptors/translocators. (II) Features of the translocon include: (a) high-affinity (K _d ≈ 10^-9 M) binding of the E3 receptor-binding R-domain E3 to BtuB; (b) insertion of disordered colicin N-terminal domain into the OmpF trimer; (c) binding of the N-terminus, documented for colicin E9, to the TolB protein on the periplasmic side of OmpF. Reinsertion of the colicin N-terminus into the second of the three pores in OmpF implies a colicin anchor site on the periplasmic side of OmpF. (III) Studies on the insertion of nuclease colicins into the cytoplasmic compartment imply that translocation proceeds via the C-terminal catalytic domain, proposed here to insert through the unoccupied third pore of the OmpF trimer, consistent with in vitro occlusion of OmpF channels by the isolated E3 C-terminal domain. (IV) Discussion of channel-forming colicins focuses mainly on colicin E1 for which BtuB is receptor and the OM TolC protein the proposed translocator. The ability of TolC, part of a multidrug efflux pump, for which there is no precedent for an import function, to provide a trans-periplasmic import pathway for colicin E1, is questioned on the basis of an unfavorable hairpin conformation of colicin N-terminal peptides inserted into TolC.

Molecular Basis of Membrane Association by the Phosphatidylinositol Mannosyltransferase PimA Enzyme from Mycobacteria

Phosphatidyl-myo-inositol mannosyltransferase A (PimA) is an essential glycosyltransferase that initiates the biosynthetic pathway of phosphatidyl-myo-inositol mannoside, lipomannan, and lipoarabinomannan, which are key glycolipids/lipoglycans of the mycobacterial cell envelope. PimA belongs to a large family of membrane-associated glycosyltransferases for which the understanding of the molecular mechanism and conformational changes that govern substrate/membrane recognition and catalysis remains a major challenge. Here, we determined that PimA preferentially binds to negatively charged phosphatidyl-myo-inositol substrate and non-substrate membrane model systems (small unilamellar vesicle) through its N-terminal domain, inducing an important structural reorganization of anionic phospholipids. By using a combination of single-point mutagenesis, circular dichroism, and a variety of fluorescence spectroscopy techniques, we determined that this interaction is mainly mediated by an amphipathic α-helix (α2), which undergoes a substantial conformational change and localizes in the vicinity of the negatively charged lipid headgroups and the very first carbon atoms of the acyl chains, at the PimA-phospholipid interface. Interestingly, a flexible region within the N-terminal domain, which undergoes β-strand-to-α-helix and α-helix-to-β-strand transitions during catalysis, interacts with anionic phospholipids; however, the effect is markedly less pronounced to that observed for the amphipathic α2, likely reflecting structural plasticity/variability. Altogether, we propose a model in which conformational transitions observed in PimA might reflect a molten globule state that confers to PimA, a higher affinity toward the dynamic and highly fluctuating lipid bilayer.

Secondary structure reshuffling modulates glycosyltransferase function at the membrane

Secondary structure refolding is a key event in biology as it modulates the conformation of many proteins in the cell, generating functional or aberrant states. The crystal structures of mannosyltransferase PimA reveal an exceptional flexibility of the protein along the catalytic cycle, including β-strand-to-α-helix and α-helix-to-β-strand transitions. These structural changes modulate catalysis and are promoted by interactions of the protein with anionic phospholipids in the membrane.

Structural characteristics of thermostable immunogenic outer membrane protein from Salmonella enterica serovar Typhi

In this work, we explored the acid-induced unfolding pathway of non-porin outer membrane protein (OMP), an immunogenic protein from Salmonella Typhi, by monitoring the conformational changes over a pH range of 1.0-7.0 by circular dichroism, intrinsic fluorescence, ANS binding, acrylamide quenching, and dynamic light scattering. The spectroscopic measurements showed that OMP in its native state at pH 7.0 exists in more stable and compact conformation. In contrast, at pH 2.0, OMP retains substantial amount of secondary structure, disrupted side chain interactions, increased hydrodynamic radii, and nearly four-fold increase in ANS fluorescence with respect to the native state, indicating that MG state exists at pH 2.0. Quenching of tryptophan fluorescence by acrylamide further confirmed the accumulation of a partially unfolded state between native and unfolded state. The effect of pH on the conformation and thermostability of OMP points towards its heat resistance at neutral pH (T m ~ 69 °C at pH 7.0, monitored by change in MRE222 nm). Acid unfolded state was also characterized by the lack of a cooperative thermal transition. All these results suggested that acid-induced unfolded state of OMP at pH 2.0 represented the molten globule state. The chemical denaturation studies with GuHCl and urea as denaturants showed dissimilar results. The chemical unfolding experiments showed that in both far-UV CD and fluorescence measurements, GuHCl is more efficient than urea. GuHCl is characterized by low C m (~1 M), while urea is characterized by high C m (~3 M). The fully unfolded states were reached at 2 M GuHCl and 4 M urea concentration, respectively. This study adds to several key considerations of importance in the development of therapeutic agents against typhoid fever for clinical purposes.

Harmonic analysis of the fluorescence response of bimane adducts of colicin E1 at helices 6, 7, and 10

The pre-channel state of helices 6, 7, and 10 (Val(447)-Gly(475) and Ile(508)-Ile(522)) of colicin E1 was investigated by a site-directed fluorescence labeling technique. A total of 44 cysteine variants were purified and covalently labeled with monobromobimane fluorescent probe. A variety of fluorescence properties of the bimane fluorophore were measured for both the soluble and membrane-bound states of the channel peptide, including the fluorescence emission maximum, fluorescence anisotropy, and membrane bilayer penetration depth. Using site-directed fluorescence labeling combined with our novel helical periodicity analysis method, the data revealed that helices 6, 7, and 10 are separate amphipathic α-helices with a calculated periodicity of T = 3.34 ± 0.08 for helix 6, T = 3.56 ± 0.03 for helix 7, and T = 2.99 ± 0.12 for helix 10 in the soluble state. In the membrane-bound state, the helical periodicity was determined to be T = 3.00 ± 0.15 for helix 6, T = 3.68 ± 0.03 for helix 7, and T = 3.47 ± 0.04 for helix 10. Dual fluorescence quencher analysis showed that both helices 6 and 7 adopt a tilted topology that correlates well with the analysis based on the fluorescence anisotropy profile. These data provide further support for the umbrella model of the colicin E1 channel domain.

Characterization of molten globule PopB in absence and presence of its chaperone PcrH

The TTSS encoding "translocator operon" of Pseudomonas aeruginosa consists of a major translocator protein PopB, minor translocator protein PopD and their cognate chaperone PcrH. Far-UV CD spectra and secondary structure prediction servers predict an α-helical model for PopB, PcrH and PopB-PcrH complex. PopB itself forms a single species of higher order oligomer (15 mer) as seen from AUC, but in complex with PcrH, both monomeric (1:1) and oligomeric form exist. PopB has large solvent-exposed hydrophobic patches and exists as an unordered molten globule in its native state, but on forming complex with PcrH it gets transformed into an ordered molten globule. Tryptophan fluorescence spectrum indicates that PopB interacts with the first TPR region of dimeric PcrH to form a stable PopB-PcrH complex that has a partial rigid structure with a large hydrodynamic radius and few tertiary contacts. The pH-dependent studies of PopB, PcrH and complex by ANS fluorescence, urea induced unfolding and thermal denaturation experiments prove that PcrH not only provides structural support to the ordered molten globule PopB in complex but also undergoes conformational change to assist PopB to pass through the needle complex of TTSS and form pores in the host cell membrane. ITC experiments show a strong affinity (K(d) ~ 0.37 μM) of PopB for PcrH at pH 7.8, which reduces to ~0.68 μM at pH 5.8. PcrH also loses its rigid tertiary structure at pH 5 and attains a molten globule conformation. This indicates that the decrease in pH releases PopB molecules and thus triggers the TTSS activation mechanism for the formation of a functional translocon.

Modulation of physiological and pathological activities of lysozyme by biological membranes

The molecular details of interactions between lipid membranes and lysozyme (Lz), a small polycationic protein with a wide range of biological activities, have long been the focus of numerous studies. The biological consequences of this process are considered to embrace at least two aspects: i) correlation between antimicrobial and membranotropic properties of this protein, and ii) lipid-mediated Lz amyloidogenesis. The mechanisms underlying the lipid-assisted protein fibrillogenesis and membrane disruption exerted by Lz in bacterial cells are believed to be similar. The present investigation was undertaken to gain further insight into Lz-lipid interactions and explore the routes by which Lz exerts its antimicrobial and amyloidogenic actions. Binding and Förster resonance energy transfer studies revealed that upon increasing the content of anionic lipids in lipid vesicles, Lz forms aggregates in a membrane environment. Total internal reflection fluorescence microscopy and pyrene excimerization reaction were employed to study the effect of Lz on the structural and dynamic properties of lipid bilayers. It was found that Lz induces lipid demixing and reduction of bilayer free volume, the magnitude of this effect being much more pronounced for oligomeric protein.

Atomic force microscopy studies of a floating-bilayer lipid membrane on a Au(111) surface modified with a hydrophilic monolayer

The surface of a gold electrode was functionalized with a hydrophilic monolayer of 1-thio-β-D-glucose formed by spontaneous self-assembly. The Langmuir-Blodgett/Langmuir-Schaefer (LB/LS) method was then used to assemble a bilayer onto the modified Au(111) surface. The bilayer lipid membrane (BLM) was separated from the Au(111) electrode surface by incorporating the monosialoganglioside GM1 into the inner leaflet of a bilayer composed of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) and cholesterol. To make the inner leaflet, monolayers of GM1/DMPC/cholesterol with mole ratios of 1:6:3, 2:5:3, and 3:4:3 were used. The outer leaflet was composed of a 7:3 mole ratio of DMPC/cholesterol. Because of the amphiphilic properties of GM1, the hydrophobic acyl chains were incorporated into the BLM, whereas the large hydrophilic carbohydrate headgroups were physically adsorbed to the Au(111) electrode surface, creating a "floating" BLM (fBLM). This model contained a water-rich reservoir between the BLM and the gold surface. In addition, because of the bilayer being physically adsorbed onto the support, the fluidity of the BLM was maintained. The compression isotherms were measured at the air/water interface to determine the phase behavior and optimal transfer conditions. The images acquired using atomic force microscopy (AFM) and the force-distance measurements showed that the structure of the fBLM evolved with increasing GM1 content from 10 to 30 mol %, undergoing a transition from a corrugated to a homogeneous phase. This change was associated with a significant increase in bilayer thickness (from ∼5.3 to 7.3 nm). The highest-quality fBLM was produced with 30 mol % GM1.

Membrane topology of the colicin E1 channel using genetically encoded fluorescence

The membrane topology of the colicin E1 channel domain was studied by fluorescence resonance energy transfer (FRET). The FRET involved a genetically encoded fluorescent amino acid (coumarin) as the donor and a selectively labeled cysteine residue tethered with DABMI (4-(dimethylamino)phenylazophenyl-4'-maleimide) as the FRET acceptor. The fluorescent coumarin residue was incorporated into the protein via an orthogonal tRNA/aminoacyl-tRNA synthetase pair that allowed selective incorporation into any site within the colicin channel domain. Each variant harbored a stop (TAG) mutation for coumarin incorporation and a cysteine (TGT) mutation for DABMI attachment. Six interhelical distances within helices 1-6 were determined using FRET analysis for both the soluble and membrane-bound states. The FRET data showed large changes in the interhelical distances among helices 3-6 upon membrane association providing new insight into the membrane-bound structure of the channel domain. In general, the coumarin-DABMI FRET interhelical efficiencies decreased upon membrane binding, building upon the umbrella model for the colicin channel. A tentative model for the closed state of the channel domain was developed based on current and previously published FRET data. The model suggests circular arrangement of helices 1-7 in a clockwise direction from the extracellular side and membrane interfacial association of helices 1, 6, 7, and 10 around the central transmembrane hairpin formed by helices 8 and 9.

Computational studies of colicin insertion into membranes: the closed state

Colicins are water-soluble toxins that, upon interaction with membranes, undergo a conformational change, insert, and form pores in them. Pore formation activity is localized in a bundle of 10 α-helices named the pore-forming domain (PFD). There is evidence that colicins attach to the membrane via a hydrophobic hairpin embedded in the core of the PFD. Two main models have been suggested for the membrane-bound state: penknife and umbrella, differing in regard to the orientation of the hydrophobic hairpin with respect to the membrane. The arrangement of the amphipathic helices has been described as either a compact three-dimensional structure or a two-dimensional array of loosely interacting helices on the membrane surface. Using molecular dynamics simulations with an implicit membrane model, we studied the structure and stability of the conformations proposed earlier for four colicins. We find that colicins are initially driven towards the membrane by electrostatic interactions between basic residues and the negatively charged membrane surface. They do not have a unique binding orientation, but in the predominant orientations the central hydrophobic hairpin is parallel to the membrane. In the inserted state, the estimated free energy tends to be lower for the compact arrangements of the amphipathic helix, but the more expanded ones are in better agreement with experimental distance distributions. The difference in energy between penknife and umbrella conformations is small enough for equilibrium to exist between them. Elongation of the hydrophobic hairpin helices and membrane thinning were found unable to produce stabilization of the transmembrane configuration of the hydrophobic hairpin.

Role of membrane lipids for the activity of pore forming peptides and proteins

Bilayer lipids, far from being passive elements, have multiple roles in polypeptide-dependent pore formation. Lipids participate at all stages of the formation of pores by providing the binding site for proteins and peptides, conditioning their active structure and modulating the molecular reorganization of the membrane complex. Such general functions of lipids superimpose to other particular roles, from electrostatic and curvature effects to more specific actions in cases like cholesterol, sphingolipids or cardiolipin. Pores are natural phenomena in lipid membranes. Driven by membrane fluctuations and packing defects, transient water pores are related to spontaneous lipid flip-flop and non-assisted ion permeation. In the absence ofproteins or peptides, these are rare short living events, with properties dependent on the lipid composition of the membrane. Their frequency increases under conditions of internal membrane disturbance of the lipid packing, like in the presence of membrane-bound proteins or peptides. These latter molecules, in fact, form dynamic supramolecular assemblies together with the lipids and transmembrane pores are one of the possible structures of the complex. Active peptides and proteins can thus be considered inducers or enhancers of pores which increase their probability and lifetime by modifying the thermodynamic membrane balance. This includes destabilizing the membrane lamellar structure, lowering the activation energy for pore formation and stabilizing the open pore structure.

Genome-wide screens: novel mechanisms in colicin import and cytotoxicity

Only two new genes (fkpA and lepB) have been identified to be required for colicin cytotoxicity in the last 25 years. Genome-wide screening using the 'Keio collection' to test sensitivity to colicins (col) A, B, D, E1, E2, E3, E7 and N from groups A and B, allowed identification of novel genes affecting cytotoxicity and provided new information on mechanisms of action. The requirement of lipopolysaccharide for colN cytotoxicity resides specifically in the lipopolysaccharide inner-core and first glucose. ColA cytotoxicity is dependent on gmhB and rffT genes, which function in the biosynthesis of lipopolysaccharide and enterobacterial common antigen. Of the tol genes that function in the cytoplasmic membrane translocon, colE1 requires tolA and tolR but not tolQ for activity. Peptidoglycan-associated lipoprotein, which interacts with the Tol network, is not required for cytotoxicity of group A colicins. Except for TolQRA, no cytoplasmic membrane protein is essential for cytotoxicity of group A colicins, implying that TolQRA provides the sole pathway for their insertion into/through the cytoplasmic membrane. The periplasmic protease that cleaves between the receptor and catalytic domains of colE7 was not identified, implying either that the responsible gene is essential for cell viability, or that more than one gene product has the necessary proteolysis function.

Oligomeric structure of colicin ia channel in lipid bilayer membranes

Colicin Ia is a soluble, harpoon-shaped bacteriocin which translocates across the periplasmic space of sensitive Escherichia coli cell by parasitizing an outer membrane receptor and forms voltage-gated ion channels in the inner membrane. This process leads to cell death, which has been thought to be caused by a single colicin Ia molecule. To directly visualize the three-dimensional structure of the channel, we generated two-dimensional crystals of colicin Ia inserted in lipid-bilayer membranes and determined a approximately 17 three-dimensional model by electron crystallography. Supported by velocity sedimentation, chemical cross-linking and single-particle image analysis, the three-dimensional structure is a crown-shaped oligomer enclosing a approximately 35 A-wide extrabilayer vestibule. Our study suggests that lipid insertion instigates a global conformational change in colicin Ia and that more than one molecule participates in the channel architecture with the vestibule, possibly facilitating the known large scale peptide translocation upon channel opening.

Tilted, extended, and lying in wait: the membrane-bound topology of residues Lys-381-Ser-405 of the colicin E1 channel domain

The membrane-bound closed state (zero potential) of the helix 3 segment (Lys-381-Ser-405) of the colicin E1 channel domain was investigated by site-directed fluorescence labeling using a bimane probe tethered to a single cysteine residue of each mutant protein. A number of fluorescence properties of the tethered bimane probe were measured for the soluble channel mutant proteins as well as for the membrane-bound proteins. A new method called helical periodicity surface analysis was employed to fit the fluorescence data to a harmonic wave function using four different statistical methods. The fit of the various data sets to a harmonic wave function indicated that the periodicity of helix 3 in the membrane-bound state is typical for an amphipathic alpha helix (3.7-4.0 residues per turn and an angular frequency between 90 and 97 degrees). Notably, upon membrane binding, helix 3 elongates from 15 residues (soluble structure) to 20 residues by a three- and two-residue extension at the N- and C-termini of the helix, respectively. Dual quencher analysis also revealed that helix 3 is appressed to the surface of the membrane with its N-terminus more deeply buried within the interfacial region of the bilayer than its C-terminus. Finally, contrary to a previous report, our data show that helices 3 and 4 remain separate and independent helices upon membrane association in the absence of a membrane potential.

Colicin biology

Colicins are proteins produced by and toxic for some strains of Escherichia coli. They are produced by strains of E. coli carrying a colicinogenic plasmid that bears the genetic determinants for colicin synthesis, immunity, and release. Insights gained into each fundamental aspect of their biology are presented: their synthesis, which is under SOS regulation; their release into the extracellular medium, which involves the colicin lysis protein; and their uptake mechanisms and modes of action. Colicins are organized into three domains, each one involved in a different step of the process of killing sensitive bacteria. The structures of some colicins are known at the atomic level and are discussed. Colicins exert their lethal action by first binding to specific receptors, which are outer membrane proteins used for the entry of specific nutrients. They are then translocated through the outer membrane and transit through the periplasm by either the Tol or the TonB system. The components of each system are known, and their implication in the functioning of the system is described. Colicins then reach their lethal target and act either by forming a voltage-dependent channel into the inner membrane or by using their endonuclease activity on DNA, rRNA, or tRNA. The mechanisms of inhibition by specific and cognate immunity proteins are presented. Finally, the use of colicins as laboratory or biotechnological tools and their mode of evolution are discussed.

Toward elucidating the membrane topology of helix two of the colicin E1 channel domain

The membrane-bound closed state of the colicin E1 channel domain was investigated by site-directed fluorescence labeling using a bimane fluorophore attached to each single cysteine residue within helix 2 of each mutant protein. The fluorescence properties of the bimane fluorophore were measured for the membrane-associated form of the closed channel and included fluorescence emission maximum, fluorescence anisotropy, apparent polarity, surface accessibility, and membrane bilayer penetration depth. The fluorescence data show that helix 2 is an amphipathic alpha-helix that is situated parallel to the membrane surface, but it is less deeply embedded within the bilayer interfacial region than is helix 1 in the closed channel. A least squares fit of the various data sets to a harmonic wave function indicated that the periodicity and angular frequency for helix 2 in the membrane-bound state are typical for an amphipathic alpha-helix (3.8 +/- 0.1 residues per turn and 94 +/- 4 degrees, respectively) that is located at an interfacial region of a membrane bilayer. Dual quencher analysis also revealed that helix 2 is peripherally membrane associated, with one face of the helix dipping into the interfacial region of the lipid bilayer and the other face projecting outwardly into the aqueous solvent. Finally, our data show that helices 1 and 2 remain independent helices upon membrane association with a short connector link (Tyr(363)-Gly(364)) and that short amphipathic alpha-helices participate in the formation of a lipid-dependent, toroidal pore for this colicin.

Lipid Dependence of the Channel Properties of a Colicin E1-Lipid Toroidal Pore

Colicin E1 belongs to a group of bacteriocins whose cytotoxicity toward Escherichia coli is exerted through formation of ion channels that depolarize the cytoplasmic membrane. The lipid dependence of colicin single-channel conductance demonstrated intimate involvement of lipid in the structure of this channel. The colicin formed "small" conductance 60-picosiemens (pS) channels, with properties similar to those previously characterized, in 1,2-dieicosenoyl-sn-glycero-3-phosphocholine (C20) or thinner membranes, whereas it formed a novel "large" conductance 600-pS state in thicker 1,2-dierucoyl-sn-glycero-3-phosphocholine (C22) bilayers. Both channel states were anion-selective and voltage-gated and displayed a requirement for acidic pH. Lipids having negative spontaneous curvature inhibited the formation of both channels but increased the ratio of open 600 pS to 60 pS conductance states. Different diameters of small and large channels, 12 and 16 A, were determined from the dependence of single-channel conductance on the size of nonelectrolyte solute probes. Colicin-induced lipid "flip-flop" and the decrease in anion selectivity of the channel in the presence of negatively charged lipids implied a significant contribution of lipid to the structure of the channel, most readily described as toroidal organization of lipid and protein to form the channel pore.

Scanning the Membrane-bound Conformation of Helix 1 in the Colicin E1 Channel Domain by Site-directed Fluorescence Labeling

Helix 1 of the membrane-associated closed state of the colicin E1 channel domain was studied by site-directed fluorescence labeling where bimane was covalently attached to a single cysteine residue in each mutant protein. A number of fluorescence properties of the tethered bimane fluorophore were measured in the membrane-bound state of the channel domain, including fluorescence emission maximum, fluorescence quantum yield, fluorescence anisotropy, membrane bilayer penetration depth, surface accessibility, and apparent polarity. The data show that helix 1 is an amphipathic alpha-helix that is situated parallel to the membrane surface. A least squares fit of the various data sets to a harmonic function indicated that the periodicity and angular frequency for helix 1 are typical for an amphipathic alpha-helix (3.7 +/- 0.1 residues per turn and 97 +/- 3.0 degrees, respectively) that is partially bathing into the membrane bilayer. Dual fluorescence quencher analysis also revealed that helix 1 is peripherally membrane-associated, with one face of the helix dipping into the lipid bilayer and the other face projecting toward the solvent. Finally, our data suggest that the helical boundaries of helix 1, at least at the C-terminal region, remain unaffected upon binding to the surface of the membrane in support of a toroidal pore model for this colicin.

Effects of Anionic Lipid and Ion Concentrations on the Topology and Segmental Mobility of Colicin Ia Channel Domain from Solid-State NMR†

Channel-forming colicins are bacterial toxins that spontaneously insert into the inner cell membrane of sensitive bacteria to form voltage-gated ion channels. It has been shown that the channel current and the conformational flexibility of colicin E1 channel domain depend on the membrane surface potential, which is regulated by the anionic lipid content and the ion concentration. To better understand the dependence of colicin structure and dynamics on the membrane surface potential, we have used solid-state NMR to investigate the topology and segmental motion of the closed state of colicin Ia channel-forming domain in membranes of different anionic lipid contents and ion concentrations. Colicin Ia channel domain was reconstituted into membranes with different POPG and KCl concentrations. 1H spin diffusion experiments indicate that the protein contains a small domain that inserts into the hydrophobic center of the 70% anionic membrane, similar to when it binds to the 25% anionic membrane. Measurements of C-H and N-H dipolar couplings indicate that, on the sub-microsecond time scale, the protein has the least segmental mobility under the high-salt and low-anionic lipid condition, which has the most physiological membrane surface potential. Measurement of millisecond time scale motions yielded similar results. These suggest that optimal channel activity requires the protein to have sufficient segmental rigidity so that entire helices can undergo cooperative conformational motions that are required for translocating the channel-forming helices across the lipid bilayer upon voltage activation.

Acid destabilization of the solution conformation of Bcl-xL does not drive its pH-dependent insertion into membranes

Regulation of programmed cell death by Bcl-xL is dependent on both its solution and integral membrane conformations. A conformational change from solution to membrane is also important in this regulation. This conformational change shows a pH-dependence similar to the translocation domain of diphtheria toxin, where an acid-induced molten globule conformation in the absence of lipid vesicles mediates the change from solution to membrane conformations. By contrast, Bcl-xL deltaTM in the absence of lipid vesicles exhibits no gross conformational changes upon acidification as observed by near- and far-UV circular dichroism spectropolarimetry. Additionally, no significant local conformational changes upon acidification were observed by heteronuclear NMR spectroscopy of Bcl-xL deltaTM. Under conditions that favor the solution conformation (pH 7.4), the free energy of folding for Bcl-xL deltaTM (deltaG(o)) was determined to be 15.8 kcal x mol(-1). Surprisingly, under conditions that favor a membrane conformation (pH 4.9), deltaG(o) was 14.6 kcal x mol(-1). These results differ from those obtained with many other membrane-insertable proteins where acid-induced destabilization is important. Therefore, other contributions must be necessary to destabilize the solution conformation Bcl-xL and favor the membrane conformation at pH 4.9. Such contributions might include the presence of a negatively charged membrane or an electrostatic potential across the membrane. Thus, for proteins that adopt both solution and membrane conformations, an obligatory molten globule intermediate may not be necessary. The absence of a molten globule intermediate might have evolved to protect Bcl-xL from intracellular proteases as it undergoes this conformational change essential for its activity.

Bax forms multispanning monomers that oligomerize to permeabilize membranes during apoptosis

Bax promotes cell death by permeabilizing mitochondrial outer membranes by an unresolved mechanism. However, in cells lacking the gene c-myc, membrane permeabilization by Bax is blocked by changes in the mitochondria that prevent Bax oligomerization. Drug-treated c-myc null cells and cells expressing Myc were used to map the topology of Bax in membranes prior to and after mitochondrial permeabilization. Chemical labeling of single cysteine mutants of Bax using a membrane bilayer impermeant cysteine-specific modifying agent revealed that Bax inserted both the 'pore domain' (helices alpha5-alpha6), and the tail-anchor (helix alpha9) into membranes prior to oligomerization and membrane permeabilization. Additional topology changes for Bax were not required in Myc-expressing cells to promote oligomerization and cytochrome c release. Our results suggest that unlike most pore-forming proteins, Bax membrane permeabilization results from oligomerization of transmembrane monomers rather than concerted insertion of the pore domains of a preformed oligomer.

Electroinsertion and activation of the C-terminal domain of colicin A, a voltage gated bacterial toxin, into mammalian cell membranes

The C-terminal fragment of colicin, a protein that is highly soluble in aqueous solution, is spontaneously and irreversibly inserted into the membranes of mammalian cells, which are locally permeabilized by a transmembrane voltage increase. Insertion is detected by immunodetection. This is obtained by mixing the protein with electropermeabilized cells. The same result is observed by pulsing the colicin/cell mixture. Electroinsertion is therefore obtained for the first time with a multi-fragment spanning protein. The cell viability is not affected beyond the effect of electropermeabilization. A train of low voltage repetitive transmembrane modulation, which cannot trigger membrane permeabilization, is applied a day after the electroinsertion. This induces no effect on unmodified cells but triggers the lysis of cells in which colicin has been inserted by the first electropulsation. The low-level electrical treatment is high enough to trigger the voltage gated opening of colicin and to induce the associated toxicity. A transmembrane configuration of colicin is therefore obtained by electroinsertion. The toxic effect of their voltage gating is only obtained when a critical number of voltage gated channels are activated.

Pore-forming protein toxins: from structure to function

Pore-forming protein toxins (PFTs) are one of Nature's most potent biological weapons. An essential feature of their toxicity is the remarkable property that PFTs can exist either in a stable water-soluble state or as an integral membrane pore. In order to convert from the water-soluble to the membrane state, the toxin must undergo large conformational changes. There are now more than a dozen PFTs for which crystal structures have been determined and the nature of the conformational changes they must undergo is beginning to be understood. Although they differ markedly in their primary, secondary, tertiary and quaternary structures, nearly all can be classified into one of two families based on the types of pores they are thought to form: alpha-PFTs or beta-PFTs. Recent work suggests a number of common features in the mechanism of membrane insertion may exist for each class.

Large Structure Rearrangement of Colicin Ia Channel Domain after Membrane Binding from 2D13C Spin Diffusion NMR

One of the main mechanisms of membrane protein folding is by spontaneous insertion into the lipid bilayer from the aqueous environment. The bacterial toxin, colicin Ia, is one such protein. To shed light on the conformational changes involved in this dramatic transfer from the polar to the hydrophobic milieu, we carried out 2D magic-angle spinning (13)C NMR experiments on the water-soluble and membrane-bound states of the channel-forming domain of colicin Ia. Proton-driven (13)C spin diffusion spectra of selectively (13)C-labeled protein show unequivocal attenuation of cross-peaks after membrane binding. This attenuation can be assigned to distance increases but not reduction of the diffusion coefficient. Analysis of the statistics of the interhelical and intrahelical (13)C-(13)C distances in the soluble protein structure indicates that the observed cross-peak reduction is well correlated with a high percentage of short interhelical contacts in the soluble protein. This suggests that colicin Ia channel domain becomes open and extended upon membrane binding, thus lengthening interhelical distances. In comparison, cross-peaks with similar intensities between the two states are dominated by intrahelical contacts in the soluble state. This suggests that the membrane-bound structure of colicin Ia channel domain may be described as a "molten globule", in which the helical secondary structure is retained while the tertiary structure is unfolded. This study demonstrates that (13)C spin diffusion NMR is a valuable tool for obtaining qualitative long-range distance constraints on membrane protein folding.

On the role of lipid in colicin pore formation

Insights into the protein-membrane interactions by which the C-terminal pore-forming domain of colicins inserts into membranes and forms voltage-gated channels, and the nature of the colicin channel, are provided by data on: (i) the flexible helix-elongated state of the colicin pore-forming domain in the fluid anionic membrane interfacial layer, the optimum anionic surface charge for channel formation, and voltage-gated translocation of charged regions of the colicin domain across the membrane; (ii) structure-function data on the voltage-gated K(+) channel showing translocation of an arginine-rich helical segment through the membrane; (iii) toroidal channels formed by small peptides that involve local participation of anionic lipids in an inverted phase. It is proposed that translocation of the colicin across the membrane occurs through minimization of the Born charging energy for translocation of positively charged basic residues across the lipid bilayer by neutralization with anionic lipid head groups. The resulting pore structure may consist of somewhat short, ca. 16 residues, trans-membrane helices, in a locally thinned membrane, together with surface elements of inverted phase lipid micelles.

Chemical and Photochemical Modification of Colicin E1 and Gramicidin A in Bilayer Lipid Membranes

Chemical modification and photodynamic treatment of the colicin E1 channel-forming domain (P178) in vesicular and planar bilayer lipid membranes (BLMs) was used to elucidate the role of tryptophan residues in colicin E1 channel activity. Modification of colicin tryptophan residues by N-bromosuccinimide (NBS), as judged by the loss of tryptophan fluorescence, resulted in complete suppression of wild-type P178 channel activity in BLMs formed from fully saturated (diphytanoyl) phospholipids, both at the macroscopic-current and single-channel levels. The similar effect on both the tryptophan fluorescence and the electric current across BLM was observed also after NBS treatment of gramicidin channels. Of the single-tryptophan P178 mutants studied, W460 showed the highest sensitivity to NBS treatment, pointing to the importance of the water-exposed Trp460 in colicin channel activity. In line with previous work, the photodynamic treatment (illumination with visible light in the presence of a photosensitizer) led to suppression of P178 channel activity in diphytanoyl-phospholipid membranes concomitant with the damage to tryptophan residues detected here by a decrease in tryptophan fluorescence. The present work revealed novel effects: activation of P178 channels as a result of both NBS and photodynamic treatments was observed with BLMs formed from unsaturated (dioleoyl) phospholipids. These phenomena are ascribed to the effect of oxidative modification of double-bond-containing lipids on P178 channel formation. The pronounced stimulation of the colicin-mediated ionic current observed after both pretreatment with NBS and sensitized photomodification of the BLMs support the idea that distortion of membrane structure can facilitate channel formation.

The molecular basis for the pH-activation mechanism in the channel-forming bacterial colicin E1

The in vitro activity of the channel-forming bacteriocins such as colicin E1 in model membranes requires the specific activation of the protein by an acidic environment in the presence of a membrane potential. Acid activation of the C-terminal domain results in the formation of an insertion-competent intermediate with an enhanced ability to penetrate and perforate cell membranes. We report novel findings of this activation process through the design and study of mutant proteins involving the replacement of conserved Asp residues Asp-408, Asp-410, and Asp-423 within helices 5a and 4 in the colicin E1 channel domain that resulted in enhanced membrane binding, bilayer insertion rates, and ion channel activities at near neutral pH values. This activation process involves the destabilization of a critical salt bridge (Asp-410 and Lys-406) and H-bonds (Asp-408 and Ser-405 main chain; Asp-423 and Lys-420 main chain). The helix-to-coil transition of this motif was identified previously by time-resolved Trp fluorescence measurements (Merrill, A. R., Steer, B. A., Prentice, G. A., Weller, M. J., and Szabo, A. G. (1997) Biochemistry 36, 6874-6884), and here we use this approach to demonstrate that disruption of the helical structure of helices 4 and 5a results in a shift in this equilibrium to favor the coil state. Finally, we show that the essential components of the pH trigger motif are conserved among the channel-forming colicins and that it likely exists within other bacterial proteins and may even have evolved into more sophisticated devices in a number of microbial species.

Colicin crystal structures: pathways and mechanisms for colicin insertion into membranes

The X-ray structures of the channel-forming colicins Ia and N, and endoribonucleolytic colicin E3, as well as of the channel domains of colicins A and E1, and spectroscopic and calorimetric data for intact colicin E1, are discussed in the context of the mechanisms and pathways by which colicins are imported into cells. The extensive helical coiled-coil in the R domain and internal hydrophobic hairpin in the C domain are important features relevant to colicin import and channel formation. The concept of outer membrane translocation mediated by two receptors, one mainly used for initial binding and second for translocation, such as BtuB and TolC, respectively, is discussed. Helix elongation and conformational flexibility are prerequisites for import of soluble toxin-like proteins into membranes. Helix elongation contradicts suggestions that the colicin import involves a molten globule intermediate. The nature of the open-channel structure is discussed.

Determination of membrane protein topology by red-edge excitation shift analysis: application to the membrane-bound colicin E1 channel peptide

A new approach for the determination of the bilayer location of Trp residues in proteins has been applied to the study of the membrane topology of the channel-forming bacteriocin, colicin E1. This method, red-edge excitation shift (REES) analysis, was initially applied to the study of 12 single Trp-containing channel peptides of colicin E1 in the soluble state in aqueous medium. Notably, REES was observed for most of the channel peptides in aqueous solution upon low pH activation. The extent of REES was subsequently characterized using a model membrane system composed of the tripeptide, Lys-Trp-Lys, bound to dimyristoyl-sn-glycerol-3-phosphatidylserine liposomes. Subsequently, data accrued from the model peptide-lipid system was used to interpret information obtained on the channel peptides when bound to dioleoyl-sn-glycerol-3-phosphatidylcholine/dioleoyl-sn-glycerol-3-phosphatidylglycerol membrane vesicles. The single Trp mutant peptides were divided into three categories based on the change in the REES values observed for the Trp residues when the peptides were bound to liposomes as compared to the REES values measured for the soluble peptides. F-404 W, F-413 W, F-443 W, F-484 W, and W-495 peptides exhibited small and/or insignificant REES changes (Delta REES) whereas W-424, F-431 W, and Y-507 W channel peptides possessed modest REES changes (3 nm< or = Delta REES< or = 7 nm). In contrast, wild-type, Y-367 W, W-460, Y-478 W, and I-499 W channel peptides showed large Delta REES values upon membrane binding (7 nm< Delta REES< or =12 nm). The REES data for the membrane-bound structure of the colicin E1 channel peptide proved consistent with previous data for the topology of the closed channel state, which lends further credence to the currently proposed channel model. In conclusion, the REES method provides another source of topological data for assignment of the bilayer location for Trp residues within membrane-associated proteins; however, it also requires careful interpretation of spectral data in combination with structural information on the proteins being investigated.

Tuning the membrane surface potential for efficient toxin import

Membrane surface electrostatic interactions impose structural constraints on imported proteins. An unprecedented sensitive dependence on these constraints was seen in the voltage-gated import and channel formation by the C-terminal pore-forming domain of the bacteriocin, colicin E1. At physiological ionic strengths, significant channel current was observed only in a narrow interval of anionic lipid content ([L-]), with the maximum current (I(max)) at 25-30 mol% (dioleoyl)-phosphatidylglycerol ([L-]max) corresponding to a surface potential of the lipid bilayer in the absence of protein, psi(o)max = -60 +/- 5 mV. Higher ionic strength shifted [L-]max to larger values, but psi(o)max remained approximately constant. It is proposed that the channel current (i) increases and (ii) decreases at /psi(o)/ values <55 mV and >65 mV, because of (i) electrostatic interactions needed for effective insertion of the channel polypeptide and (ii) constraints due to electrostatic forces on the flexibility needed for cooperative insertion into the membrane. The loss of flexibility for /psi(o)/ 65 mV was demonstrated by the absence of thermally induced intraprotein distance changes of the bound polypeptide. The anionic lipid content, 25-30 mol%, corresponding to the channel current maxima, is similar to that of the target Escherichia coli cytoplasmic membrane and membranes of mesophilic microorganisms. This suggests that one reason the membrane surface potential is tuned in vivo is to facilitate protein import.

Structural dynamics of the membrane translocation domain of colicin E9 and its interaction with TolB

In order for the 61 kDa colicin E9 protein toxin to enter the cytoplasm of susceptible cells and kill them by hydrolysing their DNA, the colicin must interact with the outer membrane BtuB receptor and Tol translocation pathway of target cells. The translocation function is located in the N-terminal domain of the colicin molecule. (1)H, (1)H-(1)H-(15)N and (1)H-(13)C-(15)N NMR studies of intact colicin E9, its DNase domain, minimal receptor-binding domain and two N-terminal constructs containing the translocation domain showed that the region of the translocation domain that governs the interaction of colicin E9 with TolB is largely unstructured and highly flexible. Of the expected 80 backbone NH resonances of the first 83 residues of intact colicin E9, 61 were identified, with 43 of them being assigned specifically. The absence of secondary structure for these was shown through chemical shift analyses and the lack of long-range NOEs in (1)H-(1)H-(15)N NOESY spectra (tau(m)=200 ms). The enhanced flexibility of the region of the translocation domain containing the TolB box compared to the overall tumbling rate of the protein was identified from the relatively large values of backbone and tryptophan indole (15)N spin-spin relaxation times, and from the negative (1)H-(15)N NOEs of the backbone NH resonances. Variable flexibility of the N-terminal region was revealed by the (15)N T(1)/T(2) ratios, which showed that the C-terminal end of the TolB box and the region immediately following it was motionally constrained compared to other parts of the N terminus. This, together with the observation of inter-residue NOEs involving Ile54, indicated that there was some structural ordering, resulting most probably from the interactions of side-chains. Conformational heterogeneity of parts of the translocation domain was evident from a multiplicity of signals for some of the residues. Im9 binding to colicin E9 had no effect on the chemical shifts or other NMR characteristics of the region of colicin E9 containing the TolB recognition sequence, though the interaction of TolB with intact colicin E9 bound to Im9 did affect resonances from this region. The flexibility of the translocation domain of colicin E9 may be connected with its need to recognise protein partners that assist it in crossing the outer membrane and in the translocation event itself.

The pore-forming domain of colicin A fused to a signal peptide: a tool for studying pore-formation and inhibition

Pore-forming colicins are plasmid-encoded bacteriocins that kill Escherichia coli and closely related bacteria. They bind to receptors in the outer membrane and are translocated across the cell envelope to the inner membrane where they form voltage-dependent ion-channels. Colicins are composed of three domains, with the C-terminal domain responsible for pore-formation. Isolated C-terminal pore-forming domains produced in the cytoplasm of E. coli are inactive due to the polarity of the transmembrane electrochemical potential, which is the opposite of that required. However, the pore-forming domain of colicin A (pfColA) fused to a prokaryotic signal peptide (sp-pfColA) is transported across and inserts into the inner membrane of E. coli from the periplasmic side, forming a functional channel. Sp-pfColA is specifically inhibited by the colicin A immunity protein (Cai). This construct has been used to investigate colicin A channel formation in vivo and to characterise the interaction of pfColA with Cai within the inner membrane. These points will be developed further in this review.

Insertion intermediates of pore-forming colicins in membrane two-dimensional space

The formation of integral membrane voltage-gated ion channels by the initially soluble C-terminal channel polypeptide (CP) of the pore-forming colicins is a fruitful area for studies on membrane protein import. The dependence of CP import on specific membrane parameters can be better understood using liposomes and planar membranes of defined lipid composition. The membrane surface and interfacial layer provide special conditions for the transition of a pore-forming colicin from the soluble to the integral membrane state. The colicin E1 CP is arranged in the membrane interfacial layer as a conformationally mobile helical array that is extended far more in the two dimensions parallel to the membrane surface than in the third dimension perpendicular to it. The alpha-helical content of CP(E1) increases by approximately 30% upon binding to the membrane. The sequence of kinetically distinguishable events in the CP(E1)-membrane interaction is binding, unfolding to a subtended area of 4200 A(2), helix extension, and insertion, the last three events overlapping in their time course ( approximately 10 s(-1)). The extension into two dimensions and the interaction with the membrane surface may explain the reversible denaturation and refolding of secondary structure that occurs after boiling of the CP-membrane complex. Although DSC showed the presence of helix-helix interactions in the membrane-bound state, the change in secondary structure and the extended surface area argue against a molten-globule intermediate in the CP-membrane interaction. However, the surface-bound state is mobile, as surface conformational mobility is a necessary prerequisite for insertion of CP trans-membrane helices into the bilayer. The requirement for this surface protein mobility, described by "thermal melting" FRET experiments, may provide the explanation for the precipitous decrease in the voltage-gated CP channel formation at high values of surface potential of planar bilayer membranes. Thus, the membrane interfacial layer, with the CP backbone situated near the acyl chain carbonyls, provides a favorable environment for the structure changes necessary for the transition from the soluble to the membrane-inserted state.

Conformational changes of colicin Ia channel-forming domain upon membrane binding: a solid-state NMR study

Channel-forming colicins are bactericidal proteins that spontaneously insert into hydrophobic lipid bilayers. We have used magic-angle spinning solid-state nuclear magnetic resonance spectroscopy to examine the conformational differences between the water-soluble and the membrane-bound states of colicin Ia channel domain, and to study the effect of bound colicin on lipid bilayer structure and dynamics. We detected (13)C and (15)N isotropic chemical shift differences between the two forms of the protein, which indicate structural changes of the protein due to membrane binding. The Val C(alpha) signal, unambiguously assigned by double-quantum experiments, gave a 0.6 ppm downfield shift in the isotropic position and a 4 ppm reduction in the anisotropic chemical shift span after membrane binding. These suggest that the alpha-helices in the membrane-bound colicin adopt more ideal helical torsion angles as they spread onto the membrane. Colicin binding significantly reduced the lipid chain order, as manifested by (2)H quadrupolar couplings. These results are consistent with the model that colicin Ia channel domain forms an extended helical array at the membrane-water interface upon membrane binding.

Membrane protein topology probed by (1)H spin diffusion from lipids using solid-state NMR spectroscopy

We describe a two-dimensional solid-state NMR technique to investigate membrane protein topology under magic-angle spinning conditions. The experiment detects the rate of (1)H spin diffusion from the mobile lipids to the rigid protein. While spin diffusion within the rigid protein is fast, magnetization transfer in the mobile lipids is an inefficient and slow process. Qualitative analysis of (1)H spin-diffusion build-up curves from the lipid chain-end methyl groups to the protein allows the identification of membrane-embedded domains in the protein. Numerical simulations of spin-diffusion build-up curves yield the approximate insertion depth of protein segments in the membrane. The experiment is demonstrated on the selectively (13)C labeled colicin Ia channel domain, known to have a membrane-embedded domain, and on DNA/cationic lipid complexes where the DNA rods are bound to the membrane surface. The experiment is designed for X-nucleus detection, which could be (13)C or (15)N in the protein and (31)P for the DNA. Finally, we show that a qualitative distinction between membrane proteins with and without a membrane-embedded domain can be made even by using an unlabeled protein, by detection of lipid signals. This spin-diffusion experiment is simple to perform and requires no oriented bilayer preparations and only standard NMR hardware.

Influence of a lipid interface on protein dynamics in a fungal lipase

Lipases catalyze lipolytic reactions and for optimal activity they require a lipid interface. To study the effect of a lipid aggregate on the behavior of the enzyme at the interfacial plane and how the aggregate influences an attached substrate or product molecule in time and space, we have performed molecular dynamics simulations. The simulations were performed over 1 to 2 ns using explicit SPC water. The interaction energies between protein and lipid are mainly due to van der Waals contributions reflecting the hydrophobic nature of the lipid molecules. Estimations of the protonation state of titratable residues indicated that the negative charge on the fatty acid is stabilized by interactions with the titratable residues Tyr-28, His-143, and His-257. In the presence of a lipid patch, the active site lid opens wider than observed in the corresponding simulations in an aqueous environment. In that lid conformation, the hydrophobic residues Ile-85, Ile-89, and Leu-92 are embedded in the lipid patch. The behavior of the substrate or product molecule is sensitive to the environment. Entering and leaving of substrate molecules could be observed in presence of the lipid patch, whereas the product forms strong hydrogen bonds with Ser-82, Ser-144, and Trp-88, suggesting that the formation of hydrogen bonds may be an important contribution to the mechanism by which product inhibition might take place.

A helix-loop-helix peptide at the upper lip of the active site cleft of lysozyme confers potent antimicrobial activity with membrane permeabilization action

Recently, we have found that partially unfolded lysozyme exerts broad spectrum antimicrobial action in vitro against Gram-negative and Gram-positive bacteria independent of its catalytic activity. In parallel, an internal peptide (residues 98-112) of hen egg white lysozyme, obtained after digestion with clostripain, possessed broad spectrum antimicrobial action in vitro. This internal peptide is part of a helix-loop-helix domain (87-114 sequence of hen lysozyme) located at the upper lip of the active site cleft of lysozyme. The helix-loop-helix (HLH) structures are known motifs commonly found in membrane-active and DNA-binding proteins. To evaluate the contribution of the HLH peptide to the antimicrobial properties of lysozyme, the HLH sequence and its secondary structure derivatives of chicken and human lysozyme were synthesized and tested for antimicrobial activity against several bacterial strains. We found that the full HLH peptide of both chicken and human lysozymes was potently microbicidal against both Gram-positive and Gram-negative bacteria and the fungus Candida albicans. The N-terminal helix of HLH was specifically bactericidal to Gram-positive bacteria, whereas the C-terminal helix was bactericidal to all tested strains. Outer and inner membrane permeabilization studies, as well as measurements of transmembrane electrochemical potentials, provided evidence that HLH peptide and its C-terminal helix domain kill Gram-negative bacteria by crossing the outer membrane via self-promoted uptake and causing damage to the inner membrane through channel formation. The results are discussed in terms of proposed mechanisms for the catalytically independent antimicrobial activity of lysozyme that offer a new strategy for the design of potential antimicrobial drugs in the treatment of infectious diseases.

Lipid association-induced N- and C-terminal domain reorganization in human apolipoprotein E3

Apolipoprotein E (apoE) is a 299 amino acid, anti-atherogenic protein that plays a key role in regulating plasma lipoprotein metabolism. It is composed of an N-terminal (NT) domain (residues 1-191) that is responsible for binding to members of the low density lipoprotein receptor family and a C-terminal (CT) domain (residues 216-299) that anchors the protein to lipoprotein particles by virtue of its high-affinity lipid binding characteristics. Isoform-specific differences in the NT domain that modulate the lipoprotein binding preference elicited by the CT domain suggest the existence and importance of domain interactions in this protein. Employing steady state fluorescence quenching and resonance energy transfer techniques, spatial proximity relationships between the N- and C-terminal domains were investigated in recombinant human apoE3. ApoE3 containing a single Trp at position 264 and an N-iodoacetyl-N'-(5-sulfo-1-napthyl) ethylenediamine (AEDANS) moiety covalently attached to the lone Cys residue at position 112 was used (AEDANS-apoE3/W@264). Fluorescence quenching studies revealed a solvent-exposed location for Trp-264. In the lipid-free state, fluorescence resonance energy transfer (FRET) was noted between Trp-264 and AEDANS, with a calculated distance of 27 A between the two fluorophores. Control experiments established that FRET observed in this system is intramolecular. FRET was abolished upon proteolysis in the linker region connecting the NT and CT domains. Lowering the solution pH to 4 induced an increase in the efficiency of intramolecular energy transfer, with the two domains reorienting about 5 A closer to one another. Interdomain FRET was retained in the presence of 0.6-1.0 m guanidine hydrochloride but was lost at higher concentrations, a manifestation of unfolding of the domains and increased distance between the donor-acceptor pair. Interaction of AEDANS-apoE3/W@264 with lipid induced a loss of FRET, attributed to spatial repositioning of the domains by >80 A. The data provide biophysical evidence that, in addition to reported conformational changes in the four-helix bundle configuration induced by lipid association, lipid binding of apoE is accompanied by reorientation of the tertiary disposition of the NT and CT domains.

Tryptophan-dependent sensitized photoinactivation of colicin E1 channels in bilayer lipid membranes

The bacterial toxin colicin E1 is known to induce voltage-gated currents across a planar bilayer lipid membrane. In the present study, it is shown that the colicin-induced current decreased substantially upon illumination of the membrane in the presence of the photosensitizer, aluminum phthalocyanine. This effect was almost completely abolished by the singlet oxygen quencher, sodium azide. Using single tryptophan mutants of colicin E1, Trp495 was identified as the amino acid residue responsible for the sensitized photodamage of the colicin channel activity. Thus, the distinct participation of a specific amino acid residue in the sensitized photoinactivation of a defined protein function was demonstrated. It is suggested that Trp495 is critical for the translocation and/or anchoring of the colicin channel domain in the membrane.

Pore-forming colicins and their relatives

The pore-forming colicins, the first proteins that were capable of forming voltage-dependent ion channels to be sequenced, have turned out to be both less tractable and more mysterious than imagined; yet they have proved interesting at every step of their short journey from producing cell to vanquished target cell. Starting out as a remarkably extended water-soluble protein, the colicin molecule is designed to interact simultaneously with several components of the complex membrane of the target cell, transform itself into a membrane protein, and become an ion channel with inscrutable properties. Unraveling how it does all this appears to be leading us into the dark recesses of protein/protein and protein/membrane interaction, where lurk fundamental processes reluctantly waiting to be revealed.

Solid-state NMR investigation of the dynamics of the soluble and membrane-bound colicin Ia channel-forming domain

Solid-state NMR spectroscopy was employed to study the molecular dynamics of the colicin Ia channel domain in the soluble and membrane-bound states. In the soluble state, the protein executes small-amplitude librations (with root-mean-square angular fluctuations of 0-10 degrees ) in the backbone and larger-amplitude motions (16-17 degrees ) in the side chains. Upon membrane binding, the motional amplitudes increase significantly for both the backbone (12-16 degrees ) and side chains (23-29 degrees ), as manifested by the reduction in the C-H and H-H dipolar couplings and (15)N chemical shift anisotropy. These motions occur not only on the pico- to nanosecond time scales, but also on the microsecond time scale, as revealed by the (1)H rotating-frame spin-lattice relaxation times. Average motional correlation times of 0.8 and 1.2 micros were extracted for the soluble and membrane-bound states, respectively. In comparison, both forms of the colicin Ia channel domain are completely immobile on the millisecond scale. These results indicate that the colicin Ia channel domain has enhanced conformational mobility in the lipid bilayer compared to the soluble state. This membrane-induced mobility increase is consistent with the loss of tertiary structure of the protein in the membrane, which was previously suggested by the extended helical array model [Zakharov et al. (1998) Proc. Natl. Acad. Sci. U.S.A. 95, 4282-4287]. An extended structure would also facilitate protein interactions with the mobile lipids and thus increase the protein internal motions. We speculate that the large mobility of the membrane-bound colicin Ia channel domain is a prerequisite for channel opening in the presence of a voltage gradient.