Nanoparticle Aggregation: Principles and Modeling

Size-dependent Effect on Foliar Utilization and Biocontrol Efficacy of Emamectin Benzoate Delivery Systems

The development of nanopesticides provides new avenues for pesticide reduction and efficiency improvement. However, the size effect of nanopesticides remains unclear, and its underlying mechanisms of influence have become a major obstacle in the design and application of pesticide nanoformulations. In this research, the noncarrier-coated emamectin benzoate (EB) solid dispersions (Micro-EB and Nano-EB) were produced under a constant surfactant-to-active ingredient ratio by a self-emulsifying-carrier solidification technique. The particle size of Micro-EB was 162 times that of spherical Nano-EB. The small size and large specific surface area of Nano-EB facilitated the adsorption of surfactants on the surface of the particles, thereby improving its dispersibility, suspensibility, and stability. The pinning effect of nanoparticles significantly suppressed droplet retraction and rebounding. Moreover, Nano-EB exhibited a 25% higher retention of the active ingredient on cabbage leaves and a 70% higher washing resistance than Micro-EB, and both were significantly different. The improvement of abilities in wetting, spreading, and retention of Nano-EB on crop leaves contributed to the increase in foliar utilization, which further resulted in a 1.6-fold enhancement of bioactivity against target Spodoptera exigua compared to Micro-EB. Especially, Nano-EB did not exacerbate the safety risk to the nontarget organism zebrafish with no significant difference. This study elaborates the size effect on the effectiveness and safety of pesticide formulations and lays a theoretical foundation for the development and rational utilization of efficient and environmentally friendly nanopesticides.

The distribution, fate, and environmental impacts of food additive nanomaterials in soil and aquatic ecosystems

Nanomaterials in the food industry are used as food additives, and the main function of these food additives is to improve food qualities including texture, flavor, color, consistency, preservation, and nutrient bioavailability. This review aims to provide an overview of the distribution, fate, and environmental and health impacts of food additive nanomaterials in soil and aquatic ecosystems. Some of the major nanomaterials in food additives include titanium dioxide, silver, gold, silicon dioxide, iron oxide, and zinc oxide. Ingestion of food products containing food additive nanomaterials via dietary intake is considered to be one of the major pathways of human exposure to nanomaterials. Food additive nanomaterials reach the terrestrial and aquatic environments directly through the disposal of food wastes in landfills and the application of food waste-derived soil amendments. A significant amount of ingested food additive nanomaterials (> 90 %) is excreted, and these nanomaterials are not efficiently removed in the wastewater system, thereby reaching the environment indirectly through the disposal of recycled water and sewage sludge in agricultural land. Food additive nanomaterials undergo various transformation and reaction processes, such as adsorption, aggregation-sedimentation, desorption, degradation, dissolution, and bio-mediated reactions in the environment. These processes significantly impact the transport and bioavailability of nanomaterials as well as their behaviour and fate in the environment. These nanomaterials are toxic to soil and aquatic organisms, and reach the food chain through plant uptake and animal transfer. The environmental and health risks of food additive nanomaterials can be overcome by eliminating their emission through recycled water and sewage sludge.

Synthesis and Bioapplication of Emerging Nanomaterials of Hafnium

A significant amount of progress in nanotechnology has been made due to the development of engineered nanoparticles. The use of metallic nanoparticles for various biomedical applications has been extensively investigated. Biomedical research is highly focused on them because of their inert nature, nanoscale structure, and similar size to many biological molecules. The intrinsic characteristics of these particles, including electronic, optical, physicochemical, and surface plasmon resonance, that can be altered by altering their size, shape, environment, aspect ratio, ease of synthesis, and functionalization properties, have led to numerous biomedical applications. Targeted drug delivery, sensing, photothermal and photodynamic therapy, and imaging are some of these. The promising clinical results of NBTXR3, a high-Z radiosensitizing nanomaterial derived from hafnium, have demonstrated translational potential of this metal. This radiosensitization approach leverages the dependence of energy attenuation on atomic number to enhance energy-matter interactions conducive to radiation therapy. High-Z nanoparticle localization in tumor issue differentially increases the effect of ionizing radiation on cancer cells versus nearby healthy ones and mitigates adverse effects by reducing the overall radiation burden. This principle enables material multifunctionality as contrast agents in X-ray-based imaging. The physiochemical properties of hafnium (Z = 72) are particularly advantageous for these applications. A well-placed K-edge absorption energy and high mass attenuation coefficient compared to elements in human tissue across clinical energy ranges leads to significant attenuation. Chemical reactivity allows for variety in nanoparticle synthesis, composition, and functionalization. Nanoparticles such as hafnium oxide exhibit excellent biocompatibility due to physiochemical inertness prior to incidence with ionizing radiation. Additionally, the optical and electronic properties are applicable in biosensing, optical component coatings, and semiconductors. The wide interest has prompted extensive research in design and synthesis to facilitate property fine-tuning. This review summarizes synthetic methods for hafnium-based nanomaterials and applications in therapy, imaging, and biosensing with a mechanistic focus. A discussion and future perspective section highlights clinical progress and elaborates on current challenges. By focusing on factors impacting applicational effectiveness and examining limitations this review aims to support researchers and expedite clinical translation of future hafnium-based nanomedicine.

The efficiency of bio-char as bitumen modifier

Improving the mechanical properties of bitumen is an important goal for road pavements design. For this reason, new compounds are now being sought for testing as bitumen modifiers. In this work, the authors studied the effect that two different chars have on two 50/70 bitumens with different chemical and physical characteristics. A complete morphological, surface and bulk characterization of the two additives was carried out. In addition, rheology, Nuclear Magnetic Resonance (NMR) relaxometry and atomic force microscopy were used to analyze the effect that the two additives exert on the properties of the bitumens. According to the results, the char sample with high porosity could be used as a modifier of mechanical properties, while no rejuvenation effects were observed for either of the two additives tested. In addition, the two additives do not give rise to segregation phenomena.

A Critical Appraisal of Functionalized 2-Dimensional Carbon-Based Nanomaterials for Drug Delivery Applications

The development of an efficient and innovative drug delivery system is essential to improve the pharmacological parameters of the medicinal compound or drug. The technique or manner used to improve the pharmacological parameters plays a crucial role in the delivery system. In the current scenario, various drug delivery systems are available where nanotechnology has firmly established itself in the field of drug delivery. One of the most prevalent elements is carbon with its allotropic modifications such as graphene-based nanomaterials, carbon nanotubes, carbon dots, and carbon fullerenes, these nanomaterials offer notable physiochemical and biochemical properties for the delivery applications due to their smaller size, surface area, and ability to interact with the cells or tissues. The exceptional physicochemical properties of carbon-based 2D nanomaterials, such as graphene and carbon nanotubes, make them attractive candidates for drug delivery systems. These nanomaterials offer a large surface area, high drug loading capacity, and tunable surface chemistry, enabling efficient encapsulation, controlled release, and targeted delivery of therapeutic agents. These properties of the nanomaterials can be exploited for drug delivery applications, like assisting the target delivery of drugs and aiding combination molecular imaging. This review emphasizes on the recent patents on 2D carbon-based nanomaterial and their role in drug delivery systems. Carbon-based 2D nanomaterials present a wealth of opportunities for advanced drug delivery systems. Their exceptional properties and versatility offers great potential in improving therapeutic efficacy, minimizing side effects, and enabling personalized medicine and the recent patents on 2D nanomaterial.

Emerging Technology of Nanofiber-Composite Hydrogels for Biomedical Applications

Hydrogels and nanofibers have been firmly established as go-to materials for various biomedical applications. They have been mostly utilized separately, rarely together, because of their distinctive attributes and shortcomings. However, the potential benefits of integrating nanofibers with hydrogels to synergistically combine their functionalities while attenuating their drawbacks are increasingly recognized. Compared to other nanocomposite materials, incorporating nanofibers into hydrogel has the distinct advantage of emulating the hierarchical structure of natural extracellular environment needed for cell and tissue culture. The most important technological aspect of developing "nanofiber-composite hydrogel" is generating nanofibers made of various polymers that are cross-linked and short enough to maintain stable dispersion in hydrated environment. In this review, recent research efforts to develop nanofiber-composite hydrogels are presented, with added emphasis on nanofiber processing techniques. Several notable examples of implementing nanofiber-composite hydrogels for biomedical applications are also introduced.

Exploring the Biomedical Applications of Biosynthesized Silver Nanoparticles Using Perilla frutescens Flavonoid Extract: Antibacterial, Antioxidant, and Cell Toxicity Properties against Colon Cancer Cells

The present study reports the biomimetic synthesis of silver nanoparticles (AgNPs) using a simple, cost effective and eco-friendly method. In this method, the flavonoid extract of Perilla frutescens (PFFE) was used as a bioreduction agent for the reduction of metallic silver into nanosilver, called P. frutescens flavonoid extract silver nanoparticles (PFFE-AgNPs). The Ultraviolet-Visible (UV-Vis) spectrum showed a characteristic absorption peak at 440 nm that confirmed the synthesis of PFFE-AgNPs. A Fourier transform infrared spectroscopic (FTIR) analysis of the PFFE-AgNPs revealed that flavonoids are involved in the bioreduction and capping processes. X-ray diffraction (XRD) and selected area electron diffraction (SAED) patterns confirmed the face-centered cubic (FCC) crystal structure of PFFE-AgNPs. A transmission electron microscopic (TEM) analysis indicated that the synthesized PFFE-AgNPs are 20 to 70 nm in size with spherical morphology and without any aggregation. Dynamic light scattering (DLS) studies showed that the average hydrodynamic size was 44 nm. A polydispersity index (PDI) of 0.321 denotes the monodispersed nature of PFFE-AgNPs. Further, a highly negative surface charge or zeta potential value (-30 mV) indicates the repulsion, non-aggregation, and stability of PFFE-AgNPs. PFFE-AgNPs showed cytotoxic effects against cancer cell lines, including human colon carcinoma (COLO205) and mouse melanoma (B16F10), with IC50 concentrations of 59.57 and 69.33 μg/mL, respectively. PFFE-AgNPs showed a significant inhibition of both Gram-positive (Listeria monocytogens and Enterococcus faecalis) and Gram-negative (Salmonella typhi and Acinetobacter baumannii) bacteria pathogens. PFFE-AgNPs exhibited in vitro antioxidant activity by quenching 1,1-diphenyl-2-picrylhydrazyl (DPPH) and hydrogen peroxide (H2O2) free radicals with IC50 values of 72.81 and 92.48 µg/mL, respectively. In this study, we also explained the plausible mechanisms of the biosynthesis, anticancer, and antibacterial effects of PFFE-AgNPs. Overall, these findings suggest that PFFE-AgNPs have potential as a multi-functional nanomaterial for biomedical applications, particularly in cancer therapy and infection control. However, it is important to note that further research is needed to determine the safety and efficacy of these nanoparticles in vivo, as well as to explore their potential in other areas of medicine.

Particle-Driven Effects at the Bacteria Interface: A Nanosilver Investigation of Particle Shape and Dose Metric

Design criteria for controlling engineered nanomaterial (ENM) antimicrobial performance will enable advances in medical, food production, processing and preservation, and water treatment applications. In pursuit of this goal, better resolution of how specific ENM properties, such as nanoparticle shape, influence antimicrobial activity is needed. This study probes the antimicrobial activity toward a model Gram-negative bacterium, Escherichia coli (E. coli), that results from interfacial interactions with differently shaped silver nanoparticles (AgNPs): cube-, disc-, and pseudospherical-AgNPs. The EC50 value (i.e., the concentration of AgNPs that inactivates 50% of the microbial population) for each shape is identified and presented as a function of mass, surface area, and particle number. Further, shifts in relative potency are identified from the associated dose-response curves (e.g., shifts left, to lower concentrations, indicate greater potency). When using a mass-based dose metric, the disc-AgNPs present the highest antimicrobial activity of the three shapes (EC50: 2.39 ± 0.26 μg/mL for discs, 2.99 ± 0.96 μg/mL for cubes, 116.33 ± 6.43 μg/mL for pseudospheres). When surface area and particle number are used as dose metrics, the cube-AgNPs possess the highest antimicrobial activity (EC50-surface area: 4.70 × 10-5 ± 1.51 × 10-5 m2/mL, EC50-particle: 5.97 × 109 ± 1.92 × 109 particles/mL), such that the relative trend in potency becomes cubes > discs > pseudospheres and cubes ≫ discs ⩾ pseudospheres, respectively. The results reveal that the antimicrobial potency of disc-AgNPs is sensitive to the dose metric, significantly decreasing in potency (∼5-30×) upon conversion from a mass-based concentration to surface area and particle number and influencing the conclusions drawn. The shift in relative particle potency highlights the importance of investigating various dose metrics within the experimental design and signals different particle parameters influencing shape-based antimicrobial activity. To probe shape-dependent behavior, we use a unique empirical approach where the physical and chemical properties (ligand chemistry, surface charge) of the AgNP shapes are carefully controlled, and total available surface area is equivalent across shapes as made through modifications to particle size and concentration. The results herein suggest that surface area alone does not drive antimicrobial activity as the different AgNP shapes at equivalent particle surface area yield significantly different magnitudes of antimicrobial activity (i.e., 100% inactivation for cube-AgNPs, <25% inactivation for disc- and pseudospherical-AgNPs). Further, the particle shapes studied possess different crystal facets, illuminating their potential influence on differentiating interactions between the particle surface and the microbe. Whereas surface area may partly contribute to antimicrobial activity in certain ENM shapes (i.e., disc-AgNPs in relation to the pseudospherical-AgNPs), the different magnitudes of antimicrobial activity across shape provide insight into the likely role of other particle-specific factors, such as crystal facets, driving the antimicrobial activity of other shapes (i.e., cube-AgNPs).

The Effect of Cryoprotectants and Storage Conditions on the Transfection Efficiency, Stability, and Safety of Lipid-Based Nanoparticles for mRNA and DNA Delivery

Lipid-based nanoparticles have recently shown great promise, establishing themselves as the gold standard in delivering novel RNA therapeutics. However, research on the effects of storage on their efficacy, safety, and stability is still lacking. Herein, the impact of storage temperature on two types of lipid-based nanocarriers, lipid nanoparticles (LNPs) and receptor-targeted nanoparticles (RTNs), loaded with either DNA or messenger RNA (mRNA), is explored and the effects of different cryoprotectants on the stability and efficacy of the formulations are investigated. The medium-term stability of the nanoparticles was evaluated by monitoring their physicochemical characteristics, entrapment and transfection efficiency, every two weeks over one month. It is demonstrated, that the use of cryoprotectants protects nanoparticles against loss of function and degradation in all storage conditions. Moreover, it is shown that the addition of sucrose enables all nanoparticles to remain stable and maintain their efficacy for up to a month when stored at -80 °C, regardless of cargo or type of nanoparticle. DNA-loaded nanoparticles also remain stable in a wider variety of storage conditions than mRNA-loaded ones. Importantly, these novel LNPs show increased GFP expression that can signify their future use in gene therapies, beyond the established role of LNPs in RNA therapeutics.

Emerging integrated SERS-microfluidic devices for analysis of cancer-derived small extracellular vesicles

Cancer-derived small extracellular vesicles (sEVs) are specific subgroups of lipid bilayer vesicles secreted from cancer cells to the extracellular environment. They carry distinct biomolecules (e.g., proteins, lipids and nucleic acids) from their parent cancer cells. Therefore, the analysis of cancer-derived sEVs can provide valuable information for cancer diagnosis. However, the use of cancer-derived sEVs in clinics is still limited due to their small size, low amounts in circulating fluids, and heterogeneous molecular features, making their isolation and analysis challenging. Recently, microfluidic technology has gained great attention for its ability to isolate sEVs in minimal volume. In addition, microfluidics allows the isolation and detection of sEVs to be integrated into a single device, offering new opportunities for clinical application. Among various detection techniques, surface-enhanced Raman scattering (SERS) has emerged as a promising candidate for integrating with microfluidic devices due to its ultra-sensitivity, stability, rapid readout, and multiplexing capability. In this tutorial review, we start with the design of microfluidics devices for isolation of sEVs and introduce the key factors to be considered for the design, and then discuss the integration of SERS and microfluidic devices by providing descriptive examples of the currently developed platforms. Lastly, we discuss the current limitations and provide our insights for utilising integrated SERS-microfluidics to isolate and analyse cancer-derived sEVs in clinical settings.

Adsorption abilities and mechanisms of Lactobacillus on various nanoplastics

As a new type of pollutants, nanoplastics (NPs), which are easily ingested by humans from food wraps, salt, drinking water, have been widely detected in various water environments, and are a threat to human health. It is therefore urgent to develop an efficient method to remove NPs from the diet or relief its harm. In the present study, the possibility of a well-known human probiotic, lactic acid bacteria (LAB), was evaluated to remove NPs from food as an absorbent. The results indicated that LAB from infant feces could efficiently absorb three types NPs, i.e. polypropylene (PP), polyethylene (PE), and polyvinyl chloride (PVC) with the adsorption rates of PP > PE > PVC (PP 78.57%, PE 71.59%, PVC 66.57%) and the Nile red-stained NPs being aggregated on the surfaces of Lactobacillus cells. The smaller the particle size, the stronger the ability of NP adsorption on the cell surface. The hydrophobicity of NPs and bacterial cells affected the adsorption process. The measurement of adsorption rates of different cell components indicated that the overall adsorption effect of cell was better than that of individual cell component. The results of molecular dynamics analysis revealed that adsorption was mainly caused by electrostatic interactions, van der Waals forces, and hydrogen bonds. The hydrophobic interaction was also involved in adsorption process. Overall, this research may provide new information for developing new strategies for NPs removal in intestinal environment.

Reconciling the actual and nominal exposure concentrations of microplastics in aqueous phase: Implications for risk assessment and deviation control

The deviation between actual and nominal concentrations of microplastics (MPs), as a long-standing issue, has been critically commented. However, there is still a lack of quantitative assessment and reconciling practice on the deviation. In this study, a total of 210 deviations were recompiled to thoroughly examine this issue. It was shown that up to 81 (39%) deviations exceeded the recommended ± 20% variation specification, highlighting that the deviation of MPs should not be neglected. This study attempted to reconcile the deviation based on the most prominent driving factors. Specifically, the game theory-based SHapley Additive exPlanations (SHAP) algorithm identified that the particle size was the most important factor affecting the deviation. Subsequently, at each size magnitude, a significant linear correlation between the logarithmic actual and nominal concentrations was determined, which provided a sound basis for estimating the actual concentration from the nominal one. Furthermore, deviations of different size classes were simulated through 10, 000 points, suggesting that the ± 20% deviation variation could be well maintained within a specific concentration range. Moreover, the potential interaction effects between factors were quantified by SHAP interaction values, with more detailed conversion bases proposed. Additionally, several control measures were recommended to reduce the deviation of MPs.

Role of Nanoparticles in Nanofluid Droplet Impact on Solid Surfaces

Splashing of a liquid droplet onto a substrate, while ubiquitous, sits at the intersection of several key fluid mechanical regions. Typically, this problem is often simplified to the transition between spreading and splashing, even for splashing on complex surfaces. Recently, there has been increased interest in using not just pure liquids but also nanofluids in applications such as spray cooling. While the addition of a few percent of nanoparticles to a Newtonian fluid does not change its apparent viscosity, the influence of the nanoparticles on the splashing transition is pronounced. We often view splashing in terms of fluid mechanics where a simple material is subjected to a complex flow and the fluid can be simply characterized by a Newtonian viscosity. For nanofluids, we have an apparently simple material in a complex flow, but the results show that the impact of the particles is nontrivial. This implies that we must now combine some of the insights we obtain from studying the rheological properties of nanosuspensions with this already complex problem.

3D-Bioprinted Phantom with Human Skin Phototypes for Biomedical Optics

3D-bioprinted skin-mimicking phantoms with skin colors ranging across the Fitzpatrick scale are reported. These tools can help understand the impact of skin phototypes on biomedical optics. Synthetic melanin nanoparticles of different sizes (70-500 nm) and clusters are fabricated to mimic the optical behavior of melanosome. The absorption coefficient and reduced scattering coefficient of the phantoms are comparable to real human skin. Further the melanin content and distribution in the phantoms versus real human skins are validated via photoacoustic (PA) imaging. The PA signal of the phantom can be improved by: 1) increasing melanin size (3-450-fold), 2) increasing clustering (2-10.5-fold), and 3) increasing concentration (1.3-8-fold). Then, multiple biomedical optics tools (e.g., PA, fluorescence imaging, and photothermal therapy) are used to understand the impact of skin tone on these modalities. These well-defined 3D-bioprinted phantoms may have value in translating biomedical optics and reducing racial bias.

Colloidal Behavior and Biodegradation of Engineered Carbon-Based Nanomaterials in Aquatic Environment

Carbon-based nanomaterials (CNMs) have attracted a growing interest over the last decades. They have become a material commonly used in industry, consumer products, water purification, and medicine. Despite this, the safety and toxic properties of different types of CNMs are still debatable. Multiple studies in recent years highlight the toxicity of CNMs in relation to aquatic organisms, including bacteria, microalgae, bivalves, sea urchins, and other species. However, the aspects that have significant influence on the toxic properties of CNMs in the aquatic environment are often not considered in research works and require further study. In this work, we summarized the current knowledge of colloidal behavior, transformation, and biodegradation of different types of CNMs, including graphene and graphene-related materials, carbon nanotubes, fullerenes, and carbon quantum dots. The other part of this work represents an overview of the known mechanisms of CNMs' biodegradation and discusses current research works relating to the biodegradation of CNMs in aquatic species. The knowledge about the biodegradation of nanomaterials will facilitate the development of the principals of "biodegradable-by-design" nanoparticles which have promising application in medicine as nano-carriers and represent lower toxicity and risks for living species and the environment.

The interaction of micro/nano plastics and the environment: Effects of ecological corona on the toxicity to aquatic organisms

Concerns about the micro/nano plastics (MNPs) exposure risks have risen in recent years. The ecological corona (EC), which is generated by the interaction between MNPs and environmental substances, has a significant impact on their environmental fate and ecological risks. As the largest sink of MNPs, the aquatic environment is of great significance for understanding the environmental behaviour of MNPs. Transmission Electron Microscope (TME), Fourier Transform Infra-Red (FTIR), Scanning Electron Microscope (SEM), Dynamic Light Scattering (DLS) and other analytical methods have been used as effective methods to analyse the formation process of EC and detect the existing EC directly or indirectly on the surface of MNPs. The physicochemical properties of MNPs, complex aquatic environments and ageing time have been identified as the key factors affecting EC formation in aquatic environments. Moreover, the EC absorbed on MNPs significantly changed their environmental behaviour and toxicity to aquatic organisms. This review gives a full understanding of the EC formation progress on the surface of MNPs and different analytical methods for EC have been summarised which can further assist the ecological risk assessment of MNPs in the aquatic environment.

Customizing continuous chemistry and catalytic conversion for carbon–carbon cross-coupling with 3dP

Support structures of various materials are used to enhance the performance of catalytic process chemistry. Typically, fixed bed supports contain regular channels enabling high throughput because of the low pressure drop that accompanies high flow rates. However, many fixed bed supports have a low surface-area-to-volume ratio resulting in poor contact between the substrates and catalyst. Three dimensional polymer printing (3dP) can be used to overcome these disadvantages by offering precise control over key design parameters of the fixed bed, including total bed surface area, as well as accommodating system integration features that are compatible with continuous flow chemistry. Additionally, 3dP allows for optimization of the catalytic process based on extrinsic constraints (e.g. operating pressure) and digital design features. These design parameters together with the physicochemical characterization and optimization of catalyst loading can be tuned to prepare customizable reactors based on objectives for substrate conversion and desired throughput. Using a Suzuki (carbon–carbon) cross-coupling reaction catalyzed by palladium, we demonstrate our integrated approach. We discuss key elements of our strategy including the rational design of hydrodynamics, immobilization of the heterogeneous catalyst, and substrate conversion. This hybrid digital-physical approach enables a range of pharmaceutical process chemistries spanning discovery to manufacturing scale.

Structural characterization and antibacterial activity of silver nanoparticles synthesized using a low-molecular-weight Royal Jelly extract

In recent years silver nanoparticles (Ag NPs) gained increased and widespread applications in various fields of industry, technology, and medicine. This study describes the green synthesis of silver nanoparticles (Ag NPs) applying a low-molecular-weight fraction (LMF) of Royal Jelly, the nanoparticle characterization, and particularly their antibacterial activity. The optical properties of NPs, characterized by UV–Vis absorption spectroscopy, showed a peak at ~ 430 nm. The hydrodynamic radius and concentration were determined by complementary dynamic light scattering (DLS) and nanoparticle tracking analysis (NTA). The particle morphology was investigated using transmission electron microscopy (TEM), and the crystallinity of the silver was confirmed by X-ray diffraction (XRD). The antibacterial activities were evaluated utilizing Gram-negative and Gram-positive bacteria and colony counting assays. The growth inhibition curve method was applied to obtain information about the corresponding minimum inhibitory concentrations (MIC) and the minimum bactericidal concentrations (MBC) required. Obtained results showed that (i) the sizes of Ag NPs are increasing within the increase of silver ion precursor concentration, (ii) DLS, in agreement with NTA, showed that most particles have dimensions in the range of 50–100 nm; (iii) E. coli was more susceptible to all Ag NP samples compared to B. subtilis.

Immunopotential of Pasteurella multocida bivalent outer membrane protein-based vaccine entrapped in aluminum hydroxide nanoparticles

Swine pasteurellosis is one of the most economically important diseases of pig caused by Pasteurella multocida (P. multocida) capsular types A and D. These organisms are commensals and opportunistic pathogens in the upper respiratory tract in pig. In the present study, we extracted whole outer membrane proteins (OMP) from P. multocida capsular types A and D and were mixed together in the ratio of 1:1 forming bivalent outer-membrane proteins. The bivalent OMP was adsorbed onto aluminum hydroxide nanoparticles. The size of aluminum hydroxide nanoparticles adsorbed outer membrane protein was found to be in the range of 125 to 130 nm. We observed that aluminum hydroxide nanoparticles adjuvanted bivalent OMP-based vaccine elicited quicker immune kinetics in terms of IgG response as compared to aluminum hydroxide microparticles adjuvanted bivalent bacterin vaccine against P. multocida capsular type A and D.

Inorganic Nanomaterials versus Polymer-Based Nanoparticles for Overcoming Neurodegeneration

Neurodegenerative disorders (NDs) affect a great number of people worldwide and also have a significant socio-economic impact on the aging population. In this context, nanomedicine applied to neurological disorders provides several biotechnological strategies and nanoformulations that improve life expectancy and the quality of life of patients affected by brain disorders. However, available treatments are limited by the presence of the blood-brain barrier (BBB) and the blood-cerebrospinal fluid barrier (B-CSFB). In this regard, nanotechnological approaches could overcome these obstacles by updating various aspects (e.g., enhanced drug-delivery efficiency and bioavailability, BBB permeation and targeting the brain parenchyma, minimizing side effects). The aim of this review is to carefully explore the key elements of different neurological disorders and summarize the available nanomaterials applied for neurodegeneration therapy looking at several types of nanocarriers. Moreover, nutraceutical-loaded nanoparticles (NPs) and synthesized NPs using green approaches are also discussed underling the need to adopt eco-friendly procedures with a low environmental impact. The proven antioxidant properties related to several natural products provide an interesting starting point for developing efficient and green nanotools useful for neuroprotection.

Thermodynamic Study of Phosphate Adsorption and Removal from Water Using Iron Oxyhydroxides

Iron oxyhydroxides (FeOOHs) appear to be the optimal group of materials among inorganic adsorbents for the removal of phosphates from water, providing significant adsorption capacities. This research work presents a thermodynamic study of phosphate adsorption by examining five different FeOOHs sorbent nanomaterials. The otablebtained results indicated that the adsorption process in these cases was spontaneous. When the experiments were performed using distilled water, akageneite (GEH), schwertmannite, and tetravalent manganese feroxyhyte (AquAsZero), displaying ΔH° values of 31.2, 34.7, and 7.3 kJ/mole, respectively, presented an endothermic adsorption process, whereas for goethite (Bayoxide) and lepidocrocite, with ΔH° values of −11.4 and −7.7 kJ/mole, respectively, the adsorption process proved to be exothermic. However, when an artificial (according to NSF) water matrix was used, GEH, schwertmannite, lepidocrocite, and AquAsZero presented ΔH° values of 13.2, 3.3, 7.7, and 3.3 kJ/mole, respectively, indicative of an endothermic process, while only for Bayoxide, with ΔH° of −17 kJ/mole, the adsorption remained exothermic. The adsorption enthalpy values generally decreased with the NSF water matrix, probably due to the competition for the same adsorption sites by other co-existing anions as well to the possible formation of soluble phosphate complexes with calcium; however, an overall positive effect on the uptake of phosphates was observed.

Block Copolymer Nanopatterning for Nonsemiconductor Device Applications

Block copolymer (BCP) nanopatterning has emerged as a versatile nanoscale fabrication tool for semiconductor devices and other applications, because of its ability to organize well-defined, periodic nanostructures with a critical dimension of 5-100 nm. While the most promising application field of BCP nanopatterning has been semiconductor devices, the versatility of BCPs has also led to enormous interest from a broad spectrum of other application areas. In particular, the intrinsically low cost and straightforward processing of BCP nanopatterning have been widely recognized for their large-area parallel formation of dense nanoscale features, which clearly contrasts that of sophisticated processing steps of the typical photolithographic process, including EUV lithography. In this Review, we highlight the recent progress in the field of BCP nanopatterning for various nonsemiconductor applications. Notable examples relying on BCP nanopatterning, including nanocatalysts, sensors, optics, energy devices, membranes, surface modifications and other emerging applications, are summarized. We further discuss the current limitations of BCP nanopatterning and suggest future research directions to open up new potential application fields.

Optimizing locked nucleic acid modification in double-stranded biosensors for live single cell analysis

Double-stranded (ds) biosensors are homogeneous oligonucleotide probes for detection of nucleic acid sequences in biochemical assays and live cell imaging.

Electronic waste as a source of rare earth element pollution: Leaching, transport in porous media, and the effects of nanoparticles

Rare earth elements (REEs) are an emerging pollutant whose increasing use in various technological applications causes increasing risk of environmental contamination. Electronic waste (E-waste) could be one major source of REE pollution, as E-waste typically contains elevated REE concentrations and is often handled in unsafe and environmentally hazardous ways. Here, a series of leaching assays revealed that <1% of REEs available in a representative E-waste were released except at acidic conditions (pH 2) rarely observed in nature. If REEs are leached from E-waste, the extent of their spread in the environment will depend, in large part, on their mobility through porous media. Measurements of REE transport through saturated sand demonstrated extremely limited mobility except at acidic conditions (pH 2), though significant REE retention by the substrate still occurs at this low pH. Similar experiments in a natural soil found REE mobility to be even lower in that substrate, with complete REE retention even after the passage of up to 215 pore volumes of a 500 ppb REE solution. Aqueous REEs are therefore not expected to be highly mobile in the environment. The presence of natural or anthropogenic nanoparticles may affect REE behavior during leaching and/or transport. Measurements indicated that silica nanoparticles can increase the concentration of fluid-mobile REEs during E-waste leaching, but both plastic and silica nanoparticles have a negligible effect on REE transport. Ultimately, the experiments and analysis presented here suggest that the threat of REE pollution from E-waste is minimal except at specific sites with unusual environmental conditions.

Peptide-Functionalized Dendrimer Nanocarriers for Targeted Microdystrophin Gene Delivery

Gene therapy is a good alternative for determined congenital disorders; however, there are numerous limitations for gene delivery in vivo including targeted cellular uptake, intracellular trafficking, and transport through the nuclear membrane. Here, a modified G5 polyamidoamine (G5 PAMAM) dendrimer-DNA complex was developed, which will allow cell-specific targeting to skeletal muscle cells and transport the DNA through the intracellular machinery and the nuclear membrane. The G5 PAMAM nanocarrier was modified with a skeletal muscle-targeting peptide (SMTP), a DLC8-binding peptide (DBP) for intracellular transport, and a nuclear localization signaling peptide (NLS) for nuclear uptake, and polyplexed with plasmid DNA containing the GFP-tagged microdystrophin (µDys) gene. The delivery of µDys has been considered as a therapeutic modality for patients suffering from a debilitating Duchenne muscular dystrophy (DMD) disorder. The nanocarrier-peptide-DNA polyplexes were prepared with different charge ratios and characterized for stability, size, surface charge, and cytotoxicity. Using the optimized nanocarrier polyplexes, the transfection efficiency in vitro was determined by demonstrating the expression of the GFP and the µDys protein using fluorescence and Western blotting studies, respectively. Protein expression in vivo was determined by injecting an optimal nanocarrier polyplex formulation to Duchenne model mice, mdx^4Cv. Ultimately, these nanocarrier polyplexes will allow targeted delivery of the microdystrophin gene to skeletal muscle cells and result in improved muscle function in Duchenne muscular dystrophy patients.

Synthesis, Characterization, Immune Regulation, and Antioxidative Assessment of Yeast-Derived Selenium Nanoparticles in Cyclophosphamide-Induced Rats

This article introduces an environmentally friendly and more economical method for preparing red selenium nanoparticles (Se-NPs) with high stability, good biocompatibility, and narrow size using yeast as a bio-reducing agent with high antioxidant, immune regulation, and low toxicity than inorganic and organic Se. The yeast-derived Se-NPs were characterized by scanning electron microscopy, transmission electron microscopy, energy dispersive spectroscopy, Fourier transform infrared spectroscopy, X-ray diffraction, and X-ray photoelectron spectroscopy. The results revealed spherical-shaped particles of Se-NPs with an average diameter of 71.14 ± 18.17 nm, an amorphous structure, and surface enhancement with an organic shell layer, that provide precise geometry and stability in the formation of bio-inert gray or black Se-NPs instead of red Se-NPs. Furthermore, the addition of 0.3-0.8 mg/kg Se-NPs in the feed significantly improved the health of mice. As Se-NPs stimulated the oxidative state of mice, it significantly increased the level of GSH-Px, SOD, and AOC, and decreased the level of MDA. The yeast-derived Se-NPs alleviated the immunosuppression induced by cyclophosphamide, whereas protected the liver, spleen, and kidney of mice, stimulated the humoral immune potential of the mice, and significantly increased the levels of I g M, IgA, and I g G. These results indicated that the yeast-derived Se-NPs, as a trace element feed additive, increased the defense of the animal against oxidative stress and infectious diseases and therefore Se-NPs can be used as a potential antibiotic substitute for animal husbandry.

Synergistic Theranostics of Magnetic Resonance Imaging and Photothermal Therapy of Breast Cancer Based on the Janus Nanostructures Fe3O4-Aushell-PEG

Background

Satisfactory prognosis of breast cancer (BC) is limited by difficulty in early diagnosis and insufficient treatment. The combination of molecular imaging and photothermal therapy (PTT) may provide a solution.

Methods

Fe₃O₄-Au_shell nanoparticles (NPs) were prepared by thermal decomposition, seeded growth and galvanic replacement and were comprehensively characterized. After conjugated to PEG, NPs were used as MRI and PTT agents in vitro and in vivo.

Results

Fe₃O₄-Au_shell NPs which had uniform Janus-like morphology were successfully synthesized. The Fe₃O₄ had a size of 18 ± 2.2 nm, and the Au_shell had an outer diameter of 25 ± 3.3 nm and an inner diameter of 20 ± 2.9 nm. The NPs showed superparamagnetism, a saturation magnetization of 36 emu/g, and an optical absorption plateau from 700 to 808 nm. The Fe₃O₄-Au_shell NPs were determined to possess good biocompatibility. After PEG coating, the zeta potential of NPs was changed from −23.75 ± 1.37 mV to −13.93 ± 0.55 mV, and the FTIR showed the characteristic C–O stretching vibration at 1113 cm⁻¹. The NPs’ MR imaging implied that the T₂ can be shortened by Fe₃O₄-Au_shell NPs in a concentration-dependent manner, and the Fe₃O₄-Au_shell NPs coated with PEG at the molar ratio of 160 (PEG: NPs) showed the highest transverse relaxivity (r₂) of 216 mM⁻¹s⁻¹. After irradiation at 0.65 W/cm² for 5 min, all cells incubated with the Fe₃O₄-Au_shell-PEG160 NPs (Fe: 30 ppm, Au: 70 ppm) died. After administrated intratumorally, Fe₃O₄-Au_shell-PEG160 notably decreased the signal intensity of tumor in T₂WI images. Under the same irradiation, the temperature of tumors injected with Fe₃O₄-Au_shell-PEG160 quickly rose to 54.6°C, and the tumors shrank rapidly and were ablated in 6 days.

Conclusion

Fe₃O₄-Au_shell-PEG NPs show good r₂ and PTT performance and are promising synergistic theranostic agents of MRI and PTT for BC.

Effect of Artemisinin-Loaded Mesoporous Cerium-Doped Calcium Silicate Nanopowder on Cell Proliferation of Human Periodontal Ligament Fibroblasts

Ion doping has rendered mesoporous structures important materials in the field of tissue engineering, as apart from drug carriers, they can additionally serve as regenerative materials. The purpose of the present study was the synthesis, characterization and evaluation of the effect of artemisinin (ART)-loaded cerium-doped mesoporous calcium silicate nanopowders (NPs) on the hemocompatibility and cell proliferation of human periodontal ligament fibroblasts (hPDLFs). Mesoporous NPs were synthesized in a basic environment via a surfactant assisted cooperative self-assembly process and were characterized using Scanning Electron Microscopy (SEM), X-ray Fluorescence Spectroscopy (XRF), Fourier Transform Infrared Spectroscopy (FT-IR), X-ray Diffraction Analysis (XRD) and N2 Porosimetry. The loading capacity of NPs was evaluated using Ultrahigh Performance Liquid Chromatography/High resolution Mass Spectrometry (UHPLC/HRMS). Their biocompatibility was evaluated with the MTT assay, and the analysis of reactive oxygen species was performed using the cell-permeable ROS-sensitive probe 2′,7′-dichlorodihydrofluorescein diacetate (H2DCFDA). The synthesized NPs presented a mesoporous structure with a surface area ranging from 1312 m²/g for undoped silica to 495 m²/g for the Ce-doped NPs, excellent bioactivity after a 1-day immersion in c-SBF, hemocompatibility and a high loading capacity (around 80%). They presented ROS scavenging properties, and both the unloaded and ART-loaded NPs significantly promoted cell proliferation even at high concentrations of NPs (125 μg/mL). The ART-loaded Ce-doped NPs with the highest amount of cerium slightly restricted cell proliferation after 7 days of culture, but the difference was not significant compared with the control untreated cells.

Interaction of nanoplastics with extracellular polymeric substances (EPS) in the aquatic environment: A special reference to eco-corona formation and associated impacts

Nanoplastics (NPs) are plastic particles with sizes ranging between 1 and 1000 nm, exhibiting exceptional qualities such as large surface area, lightweight, durability; therefore, are widely used in cosmetics, paints, electronics, etc. NPs are inevitability released into the aquatic environment where they tend to interact with both, the extracellular polymeric substances (EPS) and other fractions of natural organic matter (NOM), respectively secreted by organisms (e.g., DNA, proteins, and carbohydrates) and degradation byproducts of organic materials (e.g., humic acid and fulvic acid) fluxed into the water bodies. These biomolecules robustly encapsulate NPs to develop an eco-corona layer that alters not only the physicochemical properties but also the fate, bioreactivity, and ecological impacts of NPs. Therefore, this review summarized the documented studies highlighting the eco-corona formation on NPs and associated ecological implications in the aquatic environment. After presenting the precise background information on the occurrence of NPs and EPS in the aquatic environment, we demonstrated the basic difference between eco-corona and bio-corona formation. The reviewed studies showed that the eco-corona formed on NPs have varying sizes and composition, mainly depending on the properties of parent biomolecules, characteristics of NPs, and physicochemical parameters of the aquatic environment. Further, the potential methods for characterization and quantification of eco-corona and its composition have been also highlighted. Moreover, the ecological implications (both toxic and non-toxic) of eco-corona formation on NPs in marine and freshwater environments have been also summarized. Last but not the least, challenges and future research directions are also given, e.g., conducting field studies on eco-corona formation in the aquatic environment, optimizing methods for its characterization and quantification, and considering eco-corona concept in the future toxicity studies on NPs. Finally, understanding eco-corona formation will be critical to unveil the complex NP interactions occurring in natural aquatic systems.

The impacts of metal-based engineered nanomaterial mixtures on microbial systems: A review

The last decade has witnessed tremendous growth in the commercial use of metal-based engineered nanomaterials (ENMs) for a wide range of products and processes. Consequently, direct and indirect release into environmental systems may no longer be considered negligible or insignificant. Yet, there is an active debate as to whether there are real risks to human or ecological health with environmental exposure to ENMs. Previous research has focused primarily on the acute effects of individual ENMs using pure cultures under controlled laboratory environments, which may not accurately reveal the ecological impacts of ENMs under real environmental conditions. The goal of this review is to assess our current understanding of ENM effects as we move from exposure of single to multiple ENMs or microbial species. For instance, are ENMs' impacts on microbial communities predicted by their intrinsic physical or chemical characteristics or their effects on single microbial populations; how do chronic ENM interactions compare to acute toxicity; does behavior under simplified laboratory conditions reflect that in environmental media; finally, is biological stress modified by interactions in ENM mixtures relative to that of individual ENM? This review summarizes key findings and our evolving understanding of the ecological effects of ENMs under complex environmental conditions on microbial systems, identifies the gaps in our current knowledge, and indicates the direction of future research.

Mechanisms of transport enhancement for self-propelled nanoswimmers in a porous matrix

Micro/nanoswimmers convert diverse energy sources into directional movement, demonstrating significant promise for biomedical and environmental applications, many of which involve complex, tortuous, or crowded environments. Here, we investigated the transport behavior of self-propelled catalytic Janus particles in a complex interconnected porous void space, where the rate-determining step involves the escape from a cavity and translocation through holes to adjacent cavities. Surprisingly, self-propelled nanoswimmers escaped from cavities more than 20× faster than passive (Brownian) particles, despite the fact that the mobility of nanoswimmers was less than 2× greater than that of passive particles in unconfined bulk liquid. Combining experimental measurements, Monte Carlo simulations, and theoretical calculations, we found that the escape of nanoswimmers was enhanced by nuanced secondary effects of self-propulsion which were amplified in confined environments. In particular, active escape was facilitated by anomalously rapid confined short-time mobility, highly efficient surface-mediated searching for holes, and the effective abolition of entropic and/or electrostatic barriers at the exit hole regions by propulsion forces. The latter mechanism converted the escape process from barrier-limited to search-limited. These findings provide general and important insights into micro/nanoswimmer mobility in complex environments.

Vapor-phase production of nanomaterials

The synthesis of nanomaterials, with characteristic dimensions of 1 to 100 nm, is a key component of nanotechnology. Vapor-phase synthesis of nanomaterials has numerous advantages such as high product purity, high-throughput continuous operation, and scalability that have made it the dominant approach for the commercial synthesis of nanomaterials. At the same time, this class of methods has great potential for expanded use in research and development. Here, we present a broad review of progress in vapor-phase nanomaterial synthesis. We describe physically-based vapor-phase synthesis methods including inert gas condensation, spark discharge generation, and pulsed laser ablation; plasma processing methods including thermal- and non-thermal plasma processing; and chemically-based vapor-phase synthesis methods including chemical vapor condensation, flame-based aerosol synthesis, spray pyrolysis, and laser pyrolysis. In addition, we summarize the nanomaterials produced by each method, along with representative applications, and describe the synthesis of the most important materials produced by each method in greater detail.

Nanomaterial Shape Influence on Cell Behavior

Nanomaterials are proven to affect the biological activity of mammalian and microbial cells profoundly. Despite this fact, only surface chemistry, charge, and area are often linked to these phenomena. Moreover, most attention in this field is directed exclusively at nanomaterial cytotoxicity. At the same time, there is a large body of studies showing the influence of nanomaterials on cellular metabolism, proliferation, differentiation, reprogramming, gene transfer, and many other processes. Furthermore, it has been revealed that in all these cases, the shape of the nanomaterial plays a crucial role. In this paper, the mechanisms of nanomaterials shape control, approaches toward its synthesis, and the influence of nanomaterial shape on various biological activities of mammalian and microbial cells, such as proliferation, differentiation, and metabolism, as well as the prospects of this emerging field, are reviewed.

Dispersions of Zirconia Nanoparticles Close to the Phase Boundary of Surfactant-Free Ternary Mixtures

The achievement of a homogeneous dispersion of nanoparticles is of paramount importance in supporting their technological application. In wet processing, stable dispersions were largely obtained via surfactant or surface functionalization: although effective, the use of dispersant can alter, or even impair, the functional properties of the resulting nanostructured systems. Herein, we report a novel integrated modeling and experimental approach to obtain stable ZrO₂ nanoparticle (NP) dispersions at native dimensions (about 5 nm) in homogeneous ternary mixtures of solvents (i.e., water, ethanol, and 1,2-dichlorobenzene) without any further surface functionalization. A miscibility ternary diagram was computed exploiting the universal quasi-chemical functional-group activity coefficient (UNIFAC) model, which was then experimentally validated. Dynamic light scattering (DLS) on these mixtures highlights that nanometric structures, resembling nanoemulsion droplets, form close to the mixture two-phase boundary, with a size that depends on the ternary mixture composition. ZrO₂-NPs were then synthesized following a classic sol-gel approach and characterized by XRD and Raman spectroscopy. ZrO₂-NPs were dispersed in HCl and mixed with different mixtures of ethanol and 1,2-dichlorobenzene (DCB), obtaining homogeneous and stable dispersions. These dispersions were then studied by means of DLS as a function of DCB concentration, observing that the nanoparticles can be dispersed at their native dimensions when the mass fraction of DCB was lower than 60%, whereas the increase of the hydrophobic solvent leads to the NPs' agglomeration and sedimentation. The proposed approach not only offers specific guidelines for the design of ZrO₂-NPs dispersions in a ternary solvent mixture but can also be extended to other complex solvent mixtures in order to achieve stable dispersions of nanoparticles with no functionalization.

pH-Responsive Pickering emulsions stabilized solely by surface-inactive nanoparticles via an unconventional stabilization mechanism

Using solely highly hydrophilic particles to stabilize emulsions, especially high internal phase emulsions, has always been an important challenge. Here pH-responsive Pickering emulsions stabilized by a low concentration of bare highly hydrophilic Ludox CL nanoparticles without surface modification or addition of surfactants are developed at neutral pH. The dispersed nanoparticles can be transformed into an aggregate state with a network-like structure near the isoelectric point, which contributes to the stabilization of the emulsions. Moreover, the vdW attraction between particles and droplets also plays a key role in the formation of emulsions, which can make the aggregated nanoparticles adsorb tightly around the droplets rather than penetrate the oil-water interface. The formed protective armor and network-like aggregates separate droplets from each other to prevent coalescence. At a low nanoparticle concentration (0.5 wt%), a high internal phase emulsion can be formed and can last up to half a year. This system can emulsify not only the hydrocarbon oil but also the fluoroalkane oil phase. Finally, organic-inorganic composite particles are fabricated using the template action of the Pickering emulsions. The method of preparing composite particles is more convenient than the traditional Pickering emulsion polymerization which often requires the modification of the surface of the hydrophilic particles or the addition of auxiliary monomers. This study provides a simple green strategy for the preparation of a more stable Pickering emulsion stabilized by surface-inactive nanoparticles and will broaden the scope of applications.

Cytoplasmic delivery of quantum dots via microelectrophoresis technique

Nanoparticles with specific properties and functions have been developed for various biomedical research applications, such as in vivo and in vitro sensors, imaging agents and delivery vehicles of therapeutics. The development of an effective delivery method of nanoparticles into the intracellular environment is challenging and success in this endeavor would be beneficial to many biological studies. Here, the well-established microelectrophoresis technique was applied for the first time to deliver nanoparticles into living cells. An optimal protocol was explored to prepare semiconductive quantum dots suspensions having high monodispersity with average hydrodynamic diameter of 13.2-35.0 nm. Micropipettes were fabricated to have inner tip diameters of approximately 200 nm that are larger than quantum dots for ejection but less than 500 nm to minimize damage to the cell membrane. We demonstrated the successful delivery of quantum dots via small electrical currents (-0.2 nA) through micropipettes into the cytoplasm of living human embryonic kidney cells (roughly 20-30 μm in length) using microelectrophoresis technique. This method is promising as a simple and general strategy for delivering a variety of nanoparticles into the cellular environment.

Programmable Engineering of DNA-AuNP Encoders Integrated Multimodal Coupled Analysis for Precision Discrimination of Multiple Metal Ions

A cross-responsive strategy (CRS) based on gold nanoparticles (AuNPs) through attaching various recognition receptors on the surface of AuNPs for identifying multiple analytes is presented, and the detection throughput and overall identification accuracy are improved. However, the CRS's recognition receptor cannot get comprehensive information from the target analytes limited in number and type, which determines the overall identification accuracy. Therefore, the practicability of the CRS runs into a bottleneck. Herein, we report a programmable DNA-AuNP encoder combined with a multimodal coupled analysis algorithm for high-throughput detection and accurate analysis of multiple metal ions. The programmable DNA-AuNP encoder breaks through the limitation of the recognition receptor's quantity. Furthermore, the multimodal signals from target metal ion-induced DNA-AuNP aggregation are related to and observed in the ultraviolet absorbance spectrum, surface potential, and particle diameter. The multimodal coupled analysis algorithm can reflect comprehensive information on the target analyte more completely. Finally, this study provides a highly generic tool for the cross-responsive strategy.

Review on the advancements of magnetic gels: towards multifunctional magnetic liposome-hydrogel composites for biomedical applications

Magnetic gels have been gaining great attention in nanomedicine, as they combine features of hydrogels and magnetic nanoparticles into a single system. The incorporation of liposomes in magnetic gels further leads to a more robust multifunctional system enabling more functions and spatiotemporal control required for biomedical applications, which includes on-demand drug release. In this review, magnetic gels components are initially introduced, as well as an overview of advancements on the development, tuneability, manipulation and application of these materials. After a discussion of the advantages of combining hydrogels with liposomes, the properties, fabrication strategies and applications of magnetic liposome-hydrogel composites (magnetic lipogels or magnetolipogels) are reviewed. Overall, the progress of magnetic gels towards smart multifunctional materials are emphasized, considering the contributions for future developments.

Metallic-Nanoparticle-Based Sensing: Utilization of Mixed-Ligand Monolayers

The last two decades have seen great advancements in fundamental understanding and applications of metallic nanoparticles stabilized by mixed-ligand monolayers. Identifying and controlling the organization of multiple ligands in the nanoparticle monolayer has been studied, and its effect on particle properties has been examined. Mixed-ligand protected particles have shown advantages over monoligand protected particles in fields such as catalysis, self-assembly, imaging, and drug delivery. In this Review, the use of mixed-ligand monolayer protected nanoparticles for sensing applications will be examined. This is the first time this subject is examined as a whole. Mixed-ligand nanoparticle-based sensors are revealed to be divided into four groups, each of which will be discussed. The first group consists of ligands that work cooperatively to improve the sensors' properties. In the second group, multiple ligands are utilized for sensing multiple analytes. The third group combines ligands used for analyte recognition and signal production. In the final group, a sensitive, but unstable, functional ligand is combined with a stabilizing ligand. The Review will conclude by discussing future challenges and potential research directions for this promising subject.

Redispersion of cryoaggregated gold nanoparticle by means of laser irradiation and effect on biological interactions

Agglomeration/aggregation is an indispensable phenomenon observed by different nanoparticles. In the present study, commercial grade (50 nm) and chemically synthesized (40 nm) gold nanoparticles (AuNPs) were aggregated at sub-zero temperatures, followed by disruption of the AuNP aggregates via nanosecond laser-ablation and subsequent effect on biological interactions. AuNPs were characterized pre/post laser-ablation via UV-visible spectroscopy, transmission electron microscopy, atomic force microscopy, etc. The process of freezing (aggregation) and laser-ablation (dispersion) was performed multiple times, in order to compare the yield of nanoparticles after each cycle of laser-ablation. Further, AuNPs pre/post laser-ablation were assessed for cytotoxicity, protein-corona formation, and cell-uptake by in vitro studies using RAW264.7, Caco-2 and Neuro-2 a cell lines. Aggregates for both the types of AuNPs displayed fragmentation following first cycle of laser-ablation. In addition, AuNPs obtained after fragmentation of the aggregates showed reduction in diameter and reshaping, as compared to native AuNPs. The size and shape of the nanoparticles after second and third cycle of laser-ablation was same as that obtained after first cycle of ablation. Both laser-ablated and native AuNPs showed similar effects on viability of RAW 264.7 and Caco-2 cells, after 24 h and 48 h of exposure. Cell uptake of native and laser-ablated AuNPs was observed to be a size dependent phenomenon. Present findings showed that nanosecond laser ablation of cryoaggregated AuNPs lead to changes in the physical properties of AuNPs post ablation like size and shape, however, biological interaction with cells remained same. This work is first report on biological interactions of AuNPs generated via laser-ablation of cryoaggregated AuNPs.

A method to measure the denatured proteins in the corona of nanoparticles based on the specific adsorption of Hsp90ab1

The protein corona influences and determines the biological function of nanoparticles (NPs) in vivo. Analysis and understanding of the activities of proteins in coronas are crucial for nanobiology and nanomedicine research. Misfolded proteins in the corona of NPs theoretically exist, and a protein denaturation-related cellular response might occur in this process as well as in related diseases. The exact evaluation of protein denaturation in the corona is valuable to assess the bioactivities of NPs. Here, we found that the level of adsorbed heat shock protein 90 kDa α class B member 1 (Hsp90ab1) by the denatured protein in iron-cobalt-nickel alloy NPs (FeCoNi NPs) and iron oxide NPs (Fe₃O₄ NPs) was correlated with circular dichroism (CD) analysis and 1-anilinonaphthalene-8-sulfonate (ANS) analysis. The content of Hsp90ab1 in the corona could be easily analysed by western blotting (WB). Further analysis suggested that the method could precisely show the time-dependent protein denaturation on Fe₃O₄ NPs, as well as the influence of the size and the surface modification. More importantly, this method could be applied to other proteins, like lysozyme, other than albumin. Based on the results and the correlation analysis, incubation and detection of Hsp90ab1 in the NP-corona complex can be used as a new and feasible method to evaluate protein denaturation induced by NPs.

An innovative genosensor for the monitoring of Leishmania spp sequence using binding of pDNA to cDNA based on Cit-AgNPs

Leishmaniasis considered as the most crucial epidemic-prone diseases according to the World Health Organization. Early diagnoses and therapy of Leishmania infection is a great challenge since, it has no symptom and is resistance to drugs. Therefore, there is an urgent need for sensitive and precise detection of this pathogen. In this study, a new method was developed for optical biosensing of Leishmania spp sequence based on hybridization of Citrate capped Ag nanoparticles bonded to specific single stranded DNA probe of Leishmania spp. Aggregation of the Citrate capped Ag nanoparticles in the existence or lack of a cDNA sequence of Leishmania, cause eye catching and considerable significant alter in the UV-vis. The obtained low limit of quantification (LLOQ) of was achieved as 1ZM. Based on experimental results in optimum conditions, quick bioanalysis of Leishmania spp sequence was performed (2 min). So, this probe can be used for the clinical diagnosis of this pathogen and infection disease.

Control of Particle Size in Flame Spray Pyrolysis of Tb-doped Y2O3 for Bio-Imaging

Recently, the use of oxide-based nanomaterials for bio-imaging has received great attention owing to their remarkable stabilities as compared to those of conventional organic dyes. Therefore, the development of scalable methods for highly luminescent oxide materials with fine control of size has become crucial. In this study, we suggested modified flame spray pyrolysis (FSP) as a scalable method to produce a green-light emitting phosphor—Tb–doped Y₂O₃—in the nanometer size range. In our FSP method, an alkali salt (NaNO₃) was found to be highly effective as a size-controlling agent when it is simply mixed with other metal nitrate precursors. The FSP of the mixture solution resulted in oxide composites of Y₂O₃:Tb³⁺ and Na_xO. However, the sodium by-product was easily removed by washing with water. This salt-assisted FSP produced nano-sized and well-dispersed Y₂O₃:Tb³⁺ nanoparticles; their crystallinity and luminescence were higher than those of the bulk product made without the addition of the alkali salt. The nanoparticle surface was further coated with silica for biocompatibility and functionalized with amino groups for the attachment of biological molecules.

Nanoparticle processing: Understanding and controlling aggregation

Nanoparticles (NPs) are commonly defined as particles with size <100 nm and are currently of considerable technological and academic interest, since they are often the starting materials for nanotechnology. Novel properties develop as a bulk material is reduced to nanodimensions and is reflected in new chemistry, physics and biology. With reduction in size, a greater function of the atoms is at the surface, and promote different interaction with its environment, as compared to the bulk material. In addition, the reduction in size alters the electronic structure of the material, resulting in novel quantum effects. Size also influences mobility, primarily controlled by Brownian motion for NPs, and relevant in biological and environmental processes. However, the small size also leads to high surface energy, and NPs tend to aggregate, thereby lowering the surface energy. In all applications, the uncontrolled aggregation of NPs can have negative effects and needs to be avoided. There are however examples of controlled aggregation of NPs which give rise to novel effects. This review article is focused on the NP features that influences aggregation. Common strategies for synthesis of NPs from the gas and liquid phases are discussed with emphasis on aggregation during and after synthesis. The theory involving Van der Waals attractive force and electrical repulsive force as the controlling features of the stability of NPs is discussed, followed by examples of how repulsive and attractive forces can be manipulated experimentally to control NP aggregation. In some applications, NPs prepared by liquid methods need to be isolated for further applications. The process of solvent removal introduces new forces such as capillary forces that promote aggregation, in many cases, irreversibly. Strategies for controlling aggregation upon drying are discussed. There are also many methods for redispersing aggregated NPs, which involve mechanical forces, as well as manipulating capillary forces and surface characteristics. We conclude this review with a discussion of aggregation relevant real-world applications of NPs. This review should be relevant for scientists and technologists interested in NPs, since emphasis has been on the practical aspects of NP-based technology, and especially, strategies relevant to controlling NP aggregation.