Decolourisation of effluent from the textile industry by a microbial consortium

Evaluating the efficacy of bacterial consortium for decolorization of diazo dye mixture

Textile wastewater contains dyes mixed with other contaminants in various concentrations. Bacteria-mediated decolorization and degradation of azo dyes have achieved momentum as a method of treatment attributed to their inexpensive, eco-friendly, and application to a wide range of azo dyes. However, a single species of bacteria is inefficient in decolorizing diverse groups of dyes which is one of the most significant challenges for environmental technologists working in bioremediation. In the present study, an aerobic bacterial consortium AUJ consisting of six different bacterial strains (Pseudomonas stutzeri AK1, Pseudomonas stutzeri AK2, Pseudomonas stutzeri AK3, Bacillus spp. AK4, Pseudomonas stutzeri AK5, and Pseudomonas stutzeri AK6) removed the individual azo dyes in the 24-94% range when used in more than 200 ppm concentration within 72-96 h. In addition, the consortium was able to decolorize 52.19% mixed dyes (100 ppm) and 44.55% Acid blue 113 when used at a concentration as high as 1100 ppm within 96 h. Optimization of various nutritional and environmental parameters revealed that glucose and yeast extract were the preferred carbon and nitrogen source, respectively, and analysis of treated dye products using high-performance liquid chromatography (HPLC), Fourier-transform infrared spectroscopy (FTIR), and gas chromatography-mass spectrometry (GC-MS) confirmed the breakdown of dye. In all, we present a bacterial consortium with a good ability of dye decolorization that can be used for degrading a wide variety of azo dyes.

Unified, simple and decentralized treatment process for synthetic and real-time dye contaminated wastewaters

The aim of this study is to develop a simple, economical and effective treatment scheme to treat effluents from small scale textile dyeing units and tanneries, which have been set up in rural areas. The physicochemical properties of real time effluents procured from these industries were analysed. The workflow required for treating these effluents were ascertained by preliminary tests carried out on synthetically created solutions. A novel treatment scheme for tannery and textile dye effluents sludge volume reduction by the use of sodium hypochlorite was identified. Effective methods for the safe disposal and recycling of all the by-products generated from different steps were discussed. The proposed scheme was successfully able to decolourize and detoxify both the tannery and textile dyeing effluent with over 90% removal of both COD and BOD. The impacts of the treatment scheme on 14 different effluent parameters were reported. The methodology developed in this study may be utilized to construct simple localized treatment units for handling effluents in isolated rural areas. This preliminary treatment at the source, will help in the reduction of the load on the local treatment plants and prevent their choking.

Decoding social behaviors in a glycerol dependent bacterial consortium during Reactive Blue 28 degradation

Biodegradation of reactive azo dyes has been an arduous problem for decades. Several efficient biosystems have been proposed for dye degradation, but most of them are dependent on the availability of costly co-substrates such as peptone, yeast extract, and/or glucose. The present study describes the azo dye degradation by a bacterial consortium using glycerol as a sole co-substrate. The consortium was developed from a mixed bacterial culture obtained upon enrichment of soil sediment for Reactive Blue 28 (RB28) decolorization in the presence of glycerol (0.1%; v/v). The consortium with three bacterial species, i.e., Stenotrophomonas acidaminiphila APG1, Cellulomonas sp. APG4, and Pseudomonas stutzeri APG2, designated as "SCP," decolorized 92% of 100 ppm dye in 96 h. The intricacies of the interactions existing within the members of the consortium were resolved by a simple and unique analysis called "BSocial." Among all the members, Cellulomonas sp. APG4 exerted a net-positive impact for decolorization (%) on the consortium. The net fitness of the community increased when all the three species were present, and thus, all of them were selected for further analysis. Moreover, APG4 seemed to be central in the reductive decolorization as it possessed the highest reductase activity. The dye degradation by the consortium was demonstrated by UV-Visible spectroscopy, HPTLC, and FTIR spectroscopy of control and decolorized cell-free supernatant. The LC-ESI-MS analysis of metabolites extracted from decolorized cell-free medium led to the identification of degradation products, thus leading us to propose the plausible pathway for degradation of RB28 by bacterial consortium.

Waste Management by Biological Approach Employing Natural Substrates and Microbial Agents for the Remediation of Dyes’ Wastewater

This article aims to provide information on two aspects: firstly, waste management of residual biological agro-industrial materials generated from agriculture, and secondly, for the sustainable remediation of textile wastewater. Annually, huge amounts of solid renewable biomass materials are generated worldwide from agricultural and farming sectors. The generation of these vast amounts of solid wastes could be utilised as a valuable and renewable natural resource for various applications. The goal of promoting sustainable development has increased the interest in recycling wastes economically and in an eco-friendly way. This article reviews the published research on this topic and discusses the usage of these solid substrates in the remediation of a major environmental component, textile dye-contaminated water. The purpose of this article is to discuss an integrated and cross-disciplinary approach to sustainable solid and liquid waste management and remediation of environmental components and to report the biological approaches and their efficiency in a chemical-free and economically viable bioremediation process for large volumes of dye-contaminated water resources.

Preparation and Characterization of Cationized Cellulose for the Removal of Anionic Dyes

The factors influencing the cationization of microcrystalline cellulose with 3-chloro-2-hydroxypropyl triethylammonium chloride in the presence of NaOH were investigated. The course of the reaction was followed by estimating the nitrogen content of the cationized product while its structural features were confirmed by IR analysis. The ability of cationized cellulose to adsorb anionic dyes, viz. Acid Orange 7, Direct Blue 75 and Direct Violet 31, was investigated at 25°C and 50°C. The equilibrium data obtained were fitted by the Langmuir and Freundlich isotherm models, allowing the corresponding adsorption parameters to be determined. The results showed that the adsorption capacity was dependent on the adsorbent, temperature, the nature of the dye and (to some extent) on van der Waals and hydrogen bonding. Cationized cellulose exhibited a much better adsorption capacity towards anionic dyes than cellulose.

Optimization of Physiochemical Parameters during Bioremediation of Synthetic Dye by Marasmius cladophyllus UMAS MS8 Using Statistical Approach

In many industrial areas such as in food, pharmaceutical, cosmetic, printing, and textile, the use of synthetic dyes has been integral with products such as azo dye, anthrax, and dyestuffs. As such, these industries produce a lot of waste by-products that could contaminate the environment. Bioremediation, therefore, has become an important emerging technology due to its cost-sustainable, effective, natural approach to cleaning up contaminated groundwater and soil via the use of microorganisms. The use of microorganisms in bioremediation requires the optimisation of parameters used in cultivating the organism. Thus the aim of the work was to assess the degradation of Remazol Brilliant Blue R (RBBR) dye on soil using Plackett-Burman design by the basidiomycete, M. cladophyllus UMAS MS8. Biodegradation analyses were carried out on a soil spiked with RBBR and supplemented with rice husk as the fungus growth enhancer. A two-level Plackett-Burman design was used to screen the medium components for the effects on the decolourization of RBBR. For the analysis, eleven variables were selected and from these four parameters, dye concentration, yeast extract concentration, inoculum size, and incubation time, were found to be most effective to degrade RBBR with up to 91% RBBR removal in soil after 15 days.

Isolation, development and identification of salt-tolerant bacterial consortium from crude-oil-contaminated soil for degradation of di-azo dye Reactive Blue 220

The objective of this study was development and characterization of a halophilic bacterial consortium for rapid decolorization and degradation of a wide range of dyes and their mixtures. The 16S rRNA gene analysis of developed halophilic consortium VN.1 showed that the bacterial consortium contained six bacterial strains, which were identified as Pseudomonas fluorescens HM480360, Enterobacter aerogenes HM480361, Shewanella sp. HM589853, Arthrobacter nicotianae HM480363, Bacillus beijingensis HM480362 and Pseudomonas aeruginosa JQ659549. Halophilic consortium VN.1 was able to decolorize up to 2,500 mg/L RB220 with >85% chemical oxygen demand (COD) reduction under static condition at 30 °C and pH 8.0 in the presence of 7% NaCl. VN.1 also exhibited more than 85% COD reduction with >25 mg/(L h) rate of decolorization in the case of different reactive dye mixtures. We propose the symmetric cleavage of RB220 using Fourier transform infrared, high-performance liquid chromatography (HPLC), nuclear magnetic resonance and gas chromatography-mass spectrometry analysis, and confirmed the formation of sodium-4-aminobenzenesulfonate, sodium-6-aminonepthalenesulfonate, and sodiumbenzene/nepthalenesulfonate. Toxicity studies confirm that the biodegraded products of RB220 effluent stimulate the growth of plants as well as the bacterial community responsible for soil fertility.

Dye Decolourisation Using Two Klebsiella Strains

This study aimed to decolourise different dyes using two Klebsiella strains (Bz4 and Rz7) in different concentrations and incubation conditions. Azo (Evans blue (EB)) and triphenylmethane (brilliant green (BG)) dyes were used individually and in mixture. The toxicity of the biotransformation products was estimated. Both strains had a significant potential to decolourise the dyes in the fluorone, azo and triphenylmethane classes. The type and concentration of dye affects the decolourisation effectiveness. Differences in the dye removal potential were observed particularly in the main experiment. The best results were obtained for Bz4 in the samples with EB (up to 95.4 %) and dye mixture (up to 99 %) and for Rz7 with BG (100 %). The living and dead biomass of the strain Bz4 highly absorbs the dyes. Significant effect of the process conditions was noticed for both strains. The best results were obtained in static and semistatic samples (89-99 %) for the removal of EB and a mixture of dyes and in static samples (100 %) for BG. The decrease in zootoxicity (from class IV/V) was noticed in all samples with living biomass of the strain Bz4 (to class III/IV) and in samples with single dyes for Rz7 (to class III/IV). The decrease in phytotoxicity (from class III/IV) was noticed for Bz4 in the samples with BG and a mixture (to class III) and for Rz7 in the samples with BG (to class III). The process conditions did not affect the changes in toxicity after the process.

Decolourisation of Different Dyes by two Pseudomonas Strains Under Various Growth Conditions

The aim of the present study was the decolourisation of mixture of two dyes belonging to different groups by two Pseudomonas fluorescens strains (Sz6 and SDz3). Influence of different incubation conditions on decolourisation effectiveness was evaluated. Dyes used in the experiment were diazo Evans blue (EB) and triphenylmethane brilliant green (BG). Another goal of the experiment was the estimation of toxicity of process by-products. Incubation conditions had a significant influence on the rate of decolourisation. The best results were reached in shaken and semistatic samples (exception Evans blue). After 24 h of experiment in semistatic conditions, BG removal reached up to 95.4 %, EB 72.8 % and dyes mixture 88.9 %. After 120 h, all tested dyes were completely removed. In most cases, dyes were removed faster and better by strain Sz6 than SDz3. At the end of the experiment, in majority of the samples, decrease of phyto- and zootoxicity was observed.

Solid-state fermentation: tool for bioremediation of adsorbed textile dyestuff on distillery industry waste-yeast biomass using isolated Bacillus cereus strain EBT1

Bioremediation of textile dyestuffs under solid-state fermentation (SSF) using industrial wastes as substrate pose an economically feasible, promising, and eco-friendly alternative. The purpose of this study was to adsorb Red M5B dye, a sample of dyes mixture and a real textile effluent on distillery industry waste-yeast biomass (DIW-YB) and its further bioremediation using Bacillus cereus EBT1 under SSF. Textile dyestuffs were allowed to adsorb on DIW-YB. DIW-YB adsorbed dyestuffs were decolorized under SSF by using B. cereus. Enzyme analysis was carried out to ensure decolorization of Red M5B. Metabolites after dye degradation were analyzed using UV-Vis spectroscopy, FTIR, HPLC, and GC-MS. DIW-YB showed adsorption of Red M5B, dyes mixture and a textile wastewater sample up to 87, 70, and 81 %, respectively. DIW-YB adsorbed Red M5B was decolorized up to 98 % by B. cereus in 36 h. Whereas B. cereus could effectively reduce American Dye Manufacture Institute value from DIW-YB adsorbed mixture of textile dyes and textile wastewater up to 70 and 100 %, respectively. Induction of extracellular enzymes such as laccase and azoreductase suggests their involvement in dye degradation. Repeated utilization of DIW-YB showed consistent adsorption and ADMI removal from textile wastewater up to seven cycles. HPLC and FTIR analysis confirms the biodegradation of Red M5B. GC-MS analysis revealed the formation of new metabolites. B. cereus has potential to bioremediate adsorbed textile dyestuffs on DIW-YB. B. cereus along with DIW-YB showed enhanced decolorization performance in tray bioreactor which suggests its potential for large-scale treatment procedures.

Decolourization of Diazo Evans Blue by Two Strains of Pseudomonas fluorescens Isolated from Different Wastewater Treatment Plants

The use of azo dyes is popular in different branches of industry. Discharge of colourants to surface water cause harmful environmental effects. The aim of the present study was evaluation of effectiveness of diazo Evans blue decolourization by two Pseudomonas strains and estimation of process byproducts toxicity. In static conditions, both tested strains removed more than 85 % of dye after 48 h and completely decolorized samples after 120 h. Agitation had negative impact on Evans blue removal (less than 70 % of dye removed after 120 h). Ecotoxicological effects were different for both studied strains beside comparable decolourization effectiveness. Increase of zootoxicity was noticed for strain Sz6 and decrease from IV to III class was noticed for strain SDz3. Optimization of process conditions for the most promising strain SDz3 should be deeply examined.

In vitro studies on degradation of synthetic dye mixture by Comamonas sp. VS-MH2 and evaluation of its efficacy using simulated microcosm

Reactive azo dyes are considered as one of the most detrimental pollutants from industrial effluents and therefore their biodegradation is receiving constant scientific consideration. A bacterial isolate VS-MH2, originating from dye contaminated sites of Gujarat, India, was exploited for its ability to degrade a synthetic dye mixture (SDM) (comprising of four azo reactive dyes) under static conditions. The identification of the isolate by 16S rRNA gene sequencing revealed it to be Comamonas sp. The biodegradation of the SDM was analyzed by UV-vis spectroscopy, IR spectroscopy and GC-MS analysis. The isolate showed high metabolic activity towards SDM and degraded it completely (100 mg L(-1)) within 30 h at pH 7 and 35 °C. Simulated microcosm studies in the presence and absence of indigenous microflora confirmed the ability of Comamonas sp. VS-MH2 for dye degradation and to colonize the soil. This is the first investigation reporting the degradation of SDM by Comamonas sp. under simulated soil microcosms.

Decolorization of dye wastewaters by biosorbents: a review

Dye wastewater is one of the most difficult to treat. There has been exhaustive research on biosorption of dye wastewater. It is evolving as an attractive option to supplement conventional treatment processes. This paper examines various biosorbents such as fungi, bacteria, algae, chitosan and peat, which are capable of decolorizing dye wastewaters; discusses various mechanism involved, the effects of various factors influencing dye wastewater decolorization and reviews pretreatment methods for increasing the biosorption capacity of the adsorbents. The paper examines the mismatch between strong scientific progress in the field of biosorption and lack of commercialization of research.

Communal action of microbial cultures for Red HE3B degradation

The consortium PMB11 consisting of three bacterial species, originally isolated from dye contaminated soil was identified as Bacillus odysseyi SUK3, Morganella morganii SUK5 and Proteus sp. SUK7. The consortium possessed the ability to decolorize various textile dyes as well as mixtures of dyes. PMB11 could decolorize Red HE3B (50 mg l(-1)) with 99% of decolorization within 12 h in nutrient broth, while in mineral medium it could decolorize up to 97% within 24h. Induction in the activities of various oxidative and reductive enzymes indicates the involvement of these enzymes in decolorization. Biodegradation of the dye was monitored using UV-vis spectroscopy, HPLC and FTIR analysis. The Red HE3B degradation pathway was proposed by GC-MS analysis. Various metabolites formed after the degradation were identified as 2,5-diaminobenzene 6-aminotriazine, aniline 2-sulfate, aniline 3-sulfate, 2-amino 5-chlorotriazine and naphthalene. Phytotoxicity studies revealed that metabolites formed after degradation were significantly less toxic in nature.

Aerobic decolourization of the indigo dye-containing textile wastewater using continuous combined bioreactors

An aerobic bioprocess was applied to Indigo dye-containing textile wastewater treatment aiming at the colour elimination and biodegradation. A combined aerobic system using continuous stirred tank reactor (CSTR) and fixed film bioreactor (FFB) was continuously operated at constant temperature and fed with the textile wastewater (pH: 7.5 and total chemical oxygen demand (COD): 1185 mg l(-1)). The CSTR is a 1l continuous flow stirred tank reactor with a 700 ml working volume, and operated with a variable wastewater loading rate (WLR) from 0.92 to 3.7 g l(-1) d(-1). The FFB is a 1.5l continuous flow with three compartments packed with a rippled cylindrical polyethylene support, operated with a variable WLR between 0.09 and 0.73 g l(-1) d(-1). The combined two bioreactors were inoculated by an acclimated microbial consortium and continuously operated with four total WLR. This system presented high COD elimination and colour removal efficiencies of 97.5% and 97.3%, respectively, obtained with a total hydraulic retention time (HRT) of 4 days and total WLR of 0.29 g l(-1) d(-1). The effects of WLR on absorption phenomena on the yield of conversion of substrate on biomass (R(TSS/COD)) and on the yield of conversion of substrate on active biomass (R(VVS/COD)) are discussed. The increase of WLR and the decrease of HRT diminished the performances of this system in terms of decolourization and COD removal explained by the sloughing of biofilm, and the washout phenomena.

Decolorization potential of mixed microbial consortia for reactive and disperse textile dyestuffs

Four different aerobic mixed consortia collected from basins of wastewater streams coming out of dying plants of Crescent Textile (CT), Sitara Textile (ST), Chenab Fabrics (CF) and Noor Fatima Textile (NF), Faisalabad, Pakistan were applied for decolorization of Drimarene Orange K-GL, Drimarene Brilliant Red K-4BL, Foron Yellow SE4G and Foron Blue RDGLN for 10 days using the shake flask technique. CT culture showed the best decolorization potential on all dyestuffs followed by ST, NF and CF, respectively. CT could completely decolorize all dyes within 3-5 days. ST cultures showed effective decolorization potential on Foron Yellow SE4G and Drimarene Brilliant Red K-4BL but complete color removal was achieved after 4 and 7 days, respectively. NF culture showed 100% decolorization efficiencies on Foron Yellow SE4G and Foron Blue RDGLN but it took comparatively longer time periods (5-7 days). Where as, the NF culture had decolorized only 40% and 50% of Drimarene orange and red, respectively, after 10 days. CF caused complete decolorization of Foron Blue RDGLN and Drimarene Brilliant Red K-4BL after 4 and 8 days, respectively but it showed poor performance on other two dyes.

Decolorization kinetics of the azo dye Reactive Red 2 under methanogenic conditions: effect of long-term culture acclimation

The biological decolorization of the textile azo dye Reactive Red 2 was investigated using a mixed, mesophilic methanogenic culture, which was developed with mixed liquor obtained from a mesophilic, municipal anaerobic digester and enriched by feeding a mixture of dextrin/peptone as well as media containing salts, trace metals and vitamins. Batch decolorization assays were conducted with the unacclimated methanogenic culture and dye decolorization kinetics were determined as a function of initial dye, biomass, and carbon source concentrations. Dye decolorization was inhibited at initial dye concentrations higher than 100 mg l(-1) and decolorization kinetics were described based on the Haldane model. The effect of long-term culture exposure to the reactive dye on decolorization kinetics, culture acclimation, as well as possible dye mineralization was tested using two reactors fed weekly for two years with an initial dye concentration of 300 mg l(-1) and a mixture of dextrin/peptone. The maximum dye decolorization rate after a 2-year acclimation at an initial dye concentration of 300 mg l(-1) was more than 10-fold higher as compared to that obtained with the unacclimated culture. Aniline and the o-aminohydroxynaphthalene derivative resulting from the reductive azo bond cleavage of the dye were detected, but further transformation(s) leading to dye mineralization were not observed. Reactive Red 2 did not serve as the carbon and energy source for the mixed culture, and dye decolorization was sustained by the continuous addition of dextrin and peptone. Thus, biological decolorization of reactive azo dyes is feasible under conditions of low redox potential created and maintained in overall methanogenic systems, but supply of a biodegradable carbon source is necessary.

Azo dye biodegradation by microbial cultures immobilized in alginate beads

Microbial degradation of azo dyes usually starts in anaerobic conditions with a reductive cleavage of the azo bond, followed by an aerobic step necessary for the degradation of the aromatic amines formed. Because some reductive processes take place also in presence of molecular oxygen, a one-step azo dye degrading process has been investigated. A microbial consortium able to degrade ethyl orange in aerobic conditions has been selected and immobilized in alginate beads coated with polyacrylamide resin. Different concentrations of ethyl orange have been completely degraded in the presence of 1% glucose or starch as cosubstrates, and different beads preparation procedures have been studied to determine the best condition for microbial degradation. The catalytic activity of the immobilized consortium improved during five serial processes carried out for 30 days at room temperature. Three pure cultures were then isolated from the consortium. The one with the greatest degrading activity, a filamentous fungus, had a degradative capacity similar to that of the whole consortium.

Analysis of secondary metabolite fate during anaerobic-aerobic azo dye biodegradation in a sequential batch reactor

A great number of the reported examples of azo dye biodegradation comprise two main steps, the reductive cleavage of the azo bond under anaerobic conditions and the subsequent aerobic mineralization of the produced aromatic amines. Based on this possible metabolism a Sequencing Batch Reactor was chosen to study biologicalcolor removal from simulated cotton textile effluents containing a reactive azo dye. In previous studies high color removal levels of the azo dye Remazol Brilliant Violet 5R were achieved (up to 90% with an initial dye concentration of 100 mg l(-1)) during the anaerobic phase of Sequencing Batch Reactor operation. However, HPLC analyses revealed that the aromatic amines formed in the anaerobic phase were not mineralized during the subsequent aerobic phase. In an attempt to promote the aerobic biodegradation of these aromatic amines three different approaches were tested, the increase of the relative duration of the aerobic phase, the increase of the hydraulic retention time through the decrease of the daily fill flow and finally the increase of the dye/carbon source concentration ratio through the decrease of the fed volumetric organic load. The two aromatic amines directly resulting from azo bond reduction were detected by HPLC analysis. However, a third metabolite with significant peak area was also detected with a time profile suggesting an equilibrium with one of the aromatic amines In spite of the conversions occurring between metabolites during the cycles of the tested approaches, no effective biodegradation of these metabolites was observed during the experimental period of over 810 days.

Effect of some operational parameters on textile dye biodegradation in a sequential batch reactor

The combination of anaerobic and aerobic periods in the operation cycle of a Sequencing Batch Reactor (SBR) was chosen to study biological color removal from simulated textile effluents containing reactive, sulfonated, monoazo and diazo dyes, respectively, Remazol Brilliant Violet 5R and Remazol Black B. 90% color removal was obtained for the violet dye in a 24-h cycle with a Sludge Retention Time (SRT) of 15 days and an aerated reaction phase of 10 h. For the black dye only 75% color removal was achieved with the same operational conditions and no improvement was observed with the increase of the SRT to 20 days. For the violet dye a reduction of the color removal values from 90 to 75% was observed with the increase of the aerated reaction phase from 10 to 12 h. However, this increase did not promote the aerobic biodegradation of the produced aromatic amines. Abiotic tests were performed with sterilized SBR samples and no color removal was observed in cell-free supernatants. However color removal values of 30 and 12% were observed in the presence of sterilized cells and supernatants with violet and black dye, respectively and could be attributed to the presence of active reducing principles in the sterilized samples.

Uptake of reactive textile dyes by Aspergillus foetidus

An isolated fungus, Aspergillus foetidus was found to effectively decolorize media containing azo reactive dyes namely, Drimarene dyes. The extent of color removal was greater than 95% within 48 h of growth of the fungus. The entire color was found to be strongly bioadsorbed to the rapidly settling fungal biomass pellets without undergoing significant biotransformation. Our investigations reveal that the process of decolorization is concomitant with the exponential growth phase of the fungus and has requirement for a biodegradable substrate such as glucose. The fungus was also able to decolorize media containing mixture of dyes to an extent of 85% within 72 h of growth. Kinetic analyses of fungal decolorization indicate that the process is time dependent and follows first order kinetics with respect to initial concentration of dye. The rates of color uptake (k values) decrease to a significant extent with increasing initial concentrations of dye. The fungus was able to grow and decolorize media in the presence of 5 ppm of chromium and 1% sodium chloride. An alternate and cheaper carbon source such as starch supported the growth and decolorization process. These results suggest that dye uptake process mediated by A. foetidus has a potential for large-scale treatment of textile mill discharges.

Decolorization of Remazol Black-B using a thermotolerant yeast, Kluyveromyces marxianus IMB3

The ability of Kluyveromyces marxianus IMB3 to decolorize Remazol Black-B dye was investigated. The effect of environmental conditions, such as pH and temperature were examined. No noticeable effects on decolorization were observed when pH varied from 3.0-5.5. Maximum colour removal, 98%, was achieved at 37 degrees C. Little or no colour removal was detected when K. marxianus IMB3 was incubated under anaerobic conditions. Further investigation, in which decolorization was monitored under extreme temperatures and low pH (to inhibit growth) and using ten fold dense inoculum, revealed that decolorization was due to biosorption to the yeast cells and not due to a metabolic reaction.

Significance of microbial biofilms in food industry: a review

Biofilms have been of considerable interest in the context of food hygiene. Of special significance is the ability of microorganisms to attach and grow on food and food-contact surfaces under favourable conditions. Biofilm formation is a dynamic process and different mechanisms are involved in their attachment and growth. Extracellular polymeric substances play an important role in the attachment and colonization of microorganisms to food-contact surfaces. Various techniques have been adopted for the proper study and understanding of biofilm attachment and control. If the microorganisms from food-contact surfaces are not completely removed, they may lead to biofilm formation and also increase the biotransfer potential. Therefore, various preventive and control strategies like hygienic plant lay-out and design of equipment, choice of materials, correct use and selection of detergents and disinfectants coupled with physical methods can be suitably applied for controlling biofilm formation on food-contact surfaces. In addition, bacteriocins and enzymes are gaining importance and have an unique potential in the food industry for the effective biocontrol and removal of biofilms. These newer biocontrol strategies are considered important for the maintenance of biofilm-free systems, for quality and safety of foods.