Formation of blends of various poly(3-hydroxyalkanoic acids) by a recombinant strain of Pseudomonas oleovorans

Identification of Oil-Loving Cupriavidus necator BM3-1 for Polyhydroxyalkanoate Production and Assessing Contribution of Exopolysaccharide for Vegetable Oil Utilization

Polyhydroxyalkanoates (PHA) have received attention owing to their biodegradability and biocompatibility, with studies exploring PHA-producing bacterial strains. As vegetable oil provides carbon and monomer precursors for poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (P(3HB-co-3HHx)), oil-utilizing strains may facilitate PHA production. Herein, Cupriavidus necator BM3-1, which produces 11.1 g/L of PHB with 5% vegetable oil, was selected among various novel Cupriavidus necator strains. This strain exhibited higher preference for vegetable oils over sugars, with soybean oil and tryptone determined to be optimal sources for PHA production. BM3-1 produced 33.9 g/L of exopolysaccharides (EPS), which was three-fold higher than the amount produced by H16 (10.1 g/L). EPS exhibited 59.7% of emulsification activity (EI24), higher than that of SDS and of EPS from H16 with soybean oil. To evaluate P(3HB-co-3HHx) production from soybean oil, BM3-1 was engineered with P(3HB-co-3HHx) biosynthetic genes (phaCRa, phaARe, and phaJPa). BM3-1/pPhaCJ produced 3.5 mol% of 3HHx and 37.1 g/L PHA. BM3-1/pCB81 (phaCAJ) produced 32.8 g/L PHA, including 5.9 mol% 3HHx. Physical and thermal analyses revealed that P(3HB-co-5.9 mol% 3HHx) was better than PHB. Collectively, we identified a novel strain with high vegetable oil utilization capacity for the production of EPS, with the option to engineer the strain for P(3HB-co-3HHx).

A review of biopolymer (Poly-β-hydroxybutyrate) synthesis in microbes cultivated on wastewater

The large quantities of non-degradable single use plastics, production and disposal, in addition to increasing amounts of municipal and industrial wastewaters are among the major global issues known today. Biodegradable plastics from biopolymers such as Poly-β-hydroxybutyrates (PHB) produced by microorganisms are potential substitutes for non-degradable petroleum-based plastics. This paper reviews the current status of wastewater-cultivated microbes utilized in PHB production, including the various types of wastewaters suitable for either pure or mixed culture PHB production. PHB-producing strains that have the potential for commercialization are also highlighted with proposed selection criteria for choosing the appropriate PHB microbe for optimization of processes. The biosynthetic pathways involved in producing microbial PHB are also discussed to highlight the advancements in genetic engineering techniques. Additionally, the paper outlines the factors influencing PHB production while exploring other metabolic pathways and metabolites simultaneously produced along with PHB in a bio-refinery context. Furthermore, the paper explores the effects of extraction methods on PHB yield and quality to ultimately facilitate the commercial production of biodegradable plastics. This review uniquely discusses the developments in research on microbial biopolymers, specifically PHB and also gives an overview of current commercial PHB companies making strides in cutting down plastic pollution and greenhouse gases.

The relevance of enzyme specificity for coenzymes and the presence of 6-phosphogluconate dehydrogenase for polyhydroxyalkanoates production in the metabolism of Pseudomonas sp. LFM046

Reconstruction of genome-based metabolic model is a useful approach for the assessment of metabolic pathways, genes and proteins involved in the environmental fitness capabilities or pathogenic potential as well as for biotechnological processes development. Pseudomonas sp. LFM046 was selected as a good polyhydroxyalkanoates (PHA) producer from carbohydrates and plant oils. Its complete genome sequence and metabolic model were obtained. Analysis revealed that the gnd gene, encoding 6-phosphogluconate dehydrogenase, is absent in Pseudomonas sp. LFM046 genome. In order to improve the knowledge about LFM046 metabolism, the coenzyme specificities of different enzymes was evaluated. Furthermore, the heterologous expression of gnd genes from Pseudomonas putida KT2440 (NAD⁺ dependent) and Escherichia coli MG1655 (NADP⁺ dependent) in LFM046 was carried out and provoke a delay on cell growth and a reduction in PHA yield, respectively. The results indicate that the adjustment in cyclic Entner-Doudoroff pathway may be an interesting strategy for it and other bacteria to simultaneously meet divergent cell needs during cultivation phases of growth and PHA production.

Production of added value bacterial lipids through valorisation of hydrocarbon-contaminated cork waste

This work demonstrates that cork used as oil-spill sorbents, contaminated with liquid hydrocarbons, herein demonstrated with hexadecane, can be biologically treated by Rhodococcus opacus B4 with concomitant lipids production. R. opacus B4 consumed up to 96% of hexadecane (C16) impregnated in natural and regranulated cork sorbents after 48h incubation, producing 0.59±0.06g of triacylglycerol (TAG) g^-1 of C16 consumed with a TAG content of 0.60±0.06gg^-1 of cellular dry weight (CDW) and 0.54±0.05g TAG g^-1 of C16 consumed with a TAG content of 0.77±0.04gg^-1 (CDW), respectively. TAG was mainly composed by fatty acids of 16 and 18 carbon chains demonstrating the feasibility of using it as raw material for biodiesel production. In addition, the obtained lipid-rich biomass (whole cells) can be used for biomethane production, at a yield of 0.4L CH₄ g^-1 (CDW). The obtained results support a novel approach for management of oil-spill contaminated cork sorbents through its valorisation by producing bacterial lipids, which can be used as feedstocks for biofuels production.

Studies on the aerobic utilization of synthesis gas (syngas) by wild type and recombinant strains of Ralstonia eutropha H16

The biotechnical platform strain Ralstonia eutropha H16 was genetically engineered to express a cox subcluster of the carboxydotrophic Oligotropha carboxidovoransOM5, including (i) the structural genes coxM, -S and -L, coding for an aerobic carbon monoxide dehydrogenase (CODH) and (ii) the genes coxD, -E, -F and -G, essential for the maturation of CODH. The cox_Oc genes expressed under control of the CO₂ -inducible promoter P_L enabled R. eutropha to oxidize CO to CO₂ for the use as carbon source, as demonstrated by ¹³ CO experiments, but the recombinant strains remained dependent on H₂ as external energy supply. Therefore, a synthetic metabolism, which could be described as 'carboxyhydrogenotrophic', was established in R. eutropha. With this extension of the bacterium's substrate range, growth in CO-, H₂ - and CO₂ -containing artificial synthesis gas atmosphere was enhanced, and poly(3-hydroxybutyrate) synthesis was increased by more than 20%.

Genome and Proteome Analysis of Rhodococcus erythropolis MI2: Elucidation of the 4,4´-Dithiodibutyric Acid Catabolism

Rhodococcus erythropolis MI2 has the extraordinary ability to utilize the xenobiotic 4,4´-dithiodibutyric acid (DTDB). Cleavage of DTDB by the disulfide-reductase Nox, which is the only verified enzyme involved in DTDB-degradation, raised 4-mercaptobutyric acid (4MB). 4MB could act as building block of a novel polythioester with unknown properties. To completely unravel the catabolism of DTDB, the genome of R. erythropolis MI2 was sequenced, and subsequently the proteome was analyzed. The draft genome sequence consists of approximately 7.2 Mbp with an overall G+C content of 62.25% and 6,859 predicted protein-encoding genes. The genome of strain MI2 is composed of three replicons: one chromosome and two megaplasmids with sizes of 6.45, 0.4 and 0.35 Mbp, respectively. When cells of strain MI2 were cultivated with DTDB as sole carbon source and compared to cells grown with succinate, several interesting proteins with significantly higher expression levels were identified using 2D-PAGE and MALDI-TOF mass spectrometry. A putative luciferase-like monooxygenase-class F420-dependent oxidoreductase (RERY_05640), which is encoded by one of the 126 monooxygenase-encoding genes of the MI2-genome, showed a 3-fold increased expression level. This monooxygenase could oxidize the intermediate 4MB into 4-oxo-4-sulfanylbutyric acid. Next, a desulfurization step, which forms succinic acid and volatile hydrogen sulfide, is proposed. One gene coding for a putative desulfhydrase (RERY_06500) was identified in the genome of strain MI2. However, the gene product was not recognized in the proteome analyses. But, a significant expression level with a ratio of up to 7.3 was determined for a putative sulfide:quinone oxidoreductase (RERY_02710), which could also be involved in the abstraction of the sulfur group. As response to the toxicity of the intermediates, several stress response proteins were strongly expressed, including a superoxide dismutase (RERY_05600) and an osmotically induced protein (RERY_02670). Accordingly, novel insights in the catabolic pathway of DTDB were gained.

Rhodococcus opacus B4: a promising bacterium for production of biofuels and biobased chemicals

Bacterial lipids have relevant applications in the production of renewable fuels and biobased oleochemicals. The genus Rhodococcus is one of the most relevant lipid producers due to its capability to accumulate those compounds, mainly triacylglycerols (TAG), when cultivated on different defined substrates, namely sugars, organic acids and hydrocarbons but also on complex carbon sources present in industrial wastes. In this work, the production of storage lipids by Rhodococcus opacus B4 using glucose, acetate and hexadecane is reported for the first time and its productivity compared with Rhodococcus opacus PD630, the best TAG producer bacterium reported. Both strains accumulated mainly TAG from all carbon sources, being influenced by the carbon source itself and by the duration of the accumulation period. R. opacus B4 produced 0.09 and 0.14 g L(-1) at 24 and 72 h, with hexadecane as carbon source, which was 2 and 3.3 fold higher than the volumetric production obtained by R. opacus PD630. Both strains presented similar fatty acids (FA) profiles in intact cells while in TAG produced fraction, R. opacus B4 revealed a higher variability in fatty acid composition than R. opacus PD630, when both strains were cultivated on hexadecane. The obtained results open new perspectives for the use of R. opacus B4 to produce TAG, in particular using oily (alkane-contaminated) waste and wastewater as cheap raw-materials. Combining TAG production with hydrocarbons degradation is a promising strategy to achieve environmental remediation while producing added value compounds.

Synthesis Gas (Syngas)-Derived Medium-Chain-Length Polyhydroxyalkanoate Synthesis in Engineered Rhodospirillum rubrum

The purple nonsulfur alphaproteobacterium Rhodospirillum rubrum S1 was genetically engineered to synthesize a heteropolymer of mainly 3-hydroxydecanoic acid and 3-hydroxyoctanoic acid [P(3HD-co-3HO)] from CO- and CO₂-containing artificial synthesis gas (syngas). For this, genes from Pseudomonas putida KT2440 coding for a 3-hydroxyacyl acyl carrier protein (ACP) thioesterase (phaG), a medium-chain-length (MCL) fatty acid coenzyme A (CoA) ligase (PP_0763), and an MCL polyhydroxyalkanoate (PHA) synthase (phaC1) were cloned and expressed under the control of the CO-inducible promoter P_cooF from R. rubrum S1 in a PHA-negative mutant of R. rubrum P(3HD-co-3HO) was accumulated to up to 7.1% (wt/wt) of the cell dry weight by a recombinant mutant strain utilizing exclusively the provided gaseous feedstock syngas. In addition to an increased synthesis of these medium-chain-length PHAs (PHA_MCL), enhanced gene expression through the P_cooF promoter also led to an increased molar fraction of 3HO in the synthesized copolymer compared with the P_lac promoter, which regulated expression on the original vector. The recombinant strains were able to partially degrade the polymer, and the deletion of phaZ2, which codes for a PHA depolymerase most likely involved in intracellular PHA degradation, did not reduce mobilization of the accumulated polymer significantly. However, an amino acid exchange in the active site of PhaZ2 led to a slight increase in PHA_MCL accumulation. The accumulated polymer was isolated; it exhibited a molecular mass of 124.3 kDa and a melting point of 49.6°C. With the metabolically engineered strains presented in this proof-of-principle study, we demonstrated the synthesis of elastomeric second-generation biopolymers from renewable feedstocks not competing with human nutrition.

IMPORTANCE

Polyhydroxyalkanoates (PHAs) are natural biodegradable polymers (biopolymers) showing properties similar to those of commonly produced petroleum-based nondegradable polymers. The utilization of cheap substrates for the microbial production of PHAs is crucial to lower production costs. Feedstock not competing with human nutrition is highly favorable. Syngas, a mixture of carbon monoxide, carbon dioxide, and hydrogen, can be obtained by pyrolysis of organic waste and can be utilized for PHA synthesis by several kinds of bacteria. Up to now, the biosynthesis of PHAs from syngas has been limited to short-chain-length PHAs, which results in a stiff and brittle material. In this study, the syngas-utilizing bacterium Rhodospirillum rubrum was genetically modified to synthesize a polymer which consisted of medium-chain-length constituents, resulting in a rubber-like material. This study reports the establishment of a microbial synthesis of these so-called medium-chain-length PHAs from syngas and therefore potentially extends the applications of syngas-derived PHAs.

Biodegradation of the organic disulfide 4,4'-dithiodibutyric acid by Rhodococcus spp

Four Rhodococcus spp. exhibited the ability to use 4,4'-dithiodibutyric acid (DTDB) as a sole carbon source for growth. The most important step for the production of a novel polythioester (PTE) using DTDB as a precursor substrate is the initial cleavage of DTDB. Thus, identification of the enzyme responsible for this step was mandatory. Because Rhodococcus erythropolis strain MI2 serves as a model organism for elucidation of the biodegradation of DTDB, it was used to identify the genes encoding the enzymes involved in DTDB utilization. To identify these genes, transposon mutagenesis of R. erythropolis MI2 was carried out using transposon pTNR-TA. Among 3,261 mutants screened, 8 showed no growth with DTDB as the sole carbon source. In five mutants, the insertion locus was mapped either within a gene coding for a polysaccharide deacetyltransferase, a putative ATPase, or an acetyl coenzyme A transferase, 1 bp upstream of a gene coding for a putative methylase, or 176 bp downstream of a gene coding for a putative kinase. In another mutant, the insertion was localized between genes encoding a putative transcriptional regulator of the TetR family (noxR) and an NADH:flavin oxidoreductase (nox). Moreover, in two other mutants, the insertion loci were mapped within a gene encoding a hypothetical protein in the vicinity of noxR and nox. The interruption mutant generated, R. erythropolis MI2 noxΩtsr, was unable to grow with DTDB as the sole carbon source. Subsequently, nox was overexpressed and purified, and its activity with DTDB was measured. The specific enzyme activity of Nox amounted to 1.2 ± 0.15 U/mg. Therefore, we propose that Nox is responsible for the initial cleavage of DTDB into 2 molecules of 4-mercaptobutyric acid (4MB).

Strain and process development for poly(3HB-co-3HP) fermentation by engineered Shimwellia blattae from glycerol

Poly(3-hydroxybytyrate-co-3-hydroxypropionate), poly(3HB-co-3HP), is a possible alternative to synthetic polymers such as polypropylene, polystyrene and polyethylene due to its low crystallinity and fragility. We already reported that recombinant strains of Shimwellia blattae expressing 1,3-propanediol dehydrogenase DhaT as well as aldehyde dehydrogenase AldD of Pseudomonas putida KT2442, propionate-CoA transferase Pct of Clostridium propionicum X2 and PHA synthase PhaC1 of Ralstonia eutropha H16 are able to accumulate up to 14.5% (wtPHA/wtCDW) of poly(3-hydroxypropionate), poly(3HP), homopolymer from glycerol as a sole carbon source (Appl Microbiol Biotechnol 98:7409-7422, 2014a). However, the cell density was rather low. In this study, we optimized the medium aiming at a more efficient PHA synthesis, and we engineered a S. blattae strain accumulating poly(3HB-co-3HP) with varying contents of the constituent 3-hydroxypropionate (3HP) depending on the cultivation conditions. Consequently, 7.12, 0.77 and 0.32 gPHA/L of poly(3HB-co-3HP) containing 2.1, 8.3 and 18.1 mol% 3HP under anaerobic/aerobic (the first 24 hours under anaerobic condition, thereafter, aerobic condition), low aeration/agitation (the minimum stirring rate required in medium mixing and small amount of aeration) and anaerobic conditions (the minimum stirring rate required in medium mixing without aeration), respectively, were synthesized from glycerol by the genetically modified S. blattae ATCC33430 strains in optimized culture medium.

Synthesis of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) from unrelated carbon sources in engineered Rhodospirillum rubrum

Different genes encoding pyridine nucleotide transhydrogenases (pntAB, udhA) and acetoacetyl-CoA reductases (phaB) were heterologously overexpressed in Rhodospirillum rubrum S1. A recombinant strain, which harbored the gene encoding the membrane-bound transhydrogenase PntAB from Escherichia coli MG1655 and the phaB1 gene coding for an NADPH-dependent acetoacetyl-CoA reductase from Ralstonia eutropha H16, accumulated poly(3-hydroxybutyrate-co-3-hydroxyvalerate) [Poly(3HB-co-3HV)] with a 3HV fraction of up to 13 mol% from fructose. This was a 13-fold increase of the 3HV content when compared to the wild-type strain. Higher contents of 3HV are known to reduce the brittleness of this polymer, which is advantageous for most applications. The engineered R. rubrum strain was also able to synthesize this industrially relevant copolymer from CO2 and CO from artificial synthesis gas (syngas) with a 3HV content of 56 mol%. The increased incorporation of 3HV was attributed to an excess of propionyl-CoA, which was generated from threonine and related amino acids to compensate for the intracellular redox imbalance resulting from the transhydrogenase reaction. Thereby, our study presents a novel, molecular approach to alter the composition of bacterial PHAs independently from external precursor supply. Moreover, this study also provides a promising production strain for syngas-derived second-generation biopolymers.

Influence of the operon structure on poly(3-hydroxypropionate) synthesis in Shimwellia blattae

Glycerol has become a cheap and abundant carbon source due to biodiesel production at a large scale, and it is available for several biotechnological applications. We recently established poly(3-hydroxypropionate) [poly(3HP)] synthesis in a recombinant Shimwellia blattae strain (Heinrich et al. Appl Environ Microbiol 79:3582-3589, 2013). The major drawbacks of the current strains are (i) low poly(3HP) yields, (ii) low plasmid stability and (iii) insufficient conversion rates. In this study, we demonstrated the influence of alterations of the operon structure, consisting of 1,3-propanediol dehydrogenase (dhaT) and aldehyde dehydrogenase (aldD) of Pseudomonas putida KT2442, propionate:coenzyme A (propionate-CoA) transferase (pct) of Clostridium propionicum X2 and polyhydroxyalkanoate (PHA) synthase (phaC1) of Ralstonia eutropha H16. It was shown that S. blattae ATCC33430/pBBR1MCS-2::dhaT::pct::aldD::phaC1 synthesized up to 14.5 % (wtPHA/wtCDW) in a 2-L fed-batch fermentation process. Furthermore, we overcame the problem of plasmid losses during the fermentation period by engineering a carbon source-dependent plasmid addiction system in a triose phosphate isomerase knockout mutant. An assumed poly(3-hydroxyalkanoic acid) degrading activity of the lipase/esterase YbfF could not be confirmed.

From waste to plastic: synthesis of poly(3-hydroxypropionate) in Shimwellia blattae

In recent years, glycerol has become an attractive carbon source for microbial processes, as it accumulates massively as a by-product of biodiesel production, also resulting in a decline of its price. A potential use of glycerol in biotechnology is the synthesis of poly(3-hydroxypropionate) [poly(3HP)], a biopolymer with promising properties which is not synthesized by any known wild-type organism. In this study, the genes for 1,3-propanediol dehydrogenase (dhaT) and aldehyde dehydrogenase (aldD) of Pseudomonas putida KT2442, propionate-coenzyme A (propionate-CoA) transferase (pct) of Clostridium propionicum X2, and polyhydroxyalkanoate (PHA) synthase (phaC1) of Ralstonia eutropha H16 were cloned and expressed in the 1,3-propanediol producer Shimwellia blattae. In a two-step cultivation process, recombinant S. blattae cells accumulated up to 9.8% ± 0.4% (wt/wt [cell dry weight]) poly(3HP) with glycerol as the sole carbon source. Furthermore, the engineered strain tolerated the application of crude glycerol derived from biodiesel production, yielding a cell density of 4.05 g cell dry weight/liter in a 2-liter fed-batch fermentation process.

Large scale extraction of poly(3-hydroxybutyrate) from Ralstonia eutropha H16 using sodium hypochlorite

Isolation of polyhydroxyalkanoates (PHAs) from bacterial cell matter is a critical step in order to achieve a profitable production of the polymer. Therefore, an extraction method must lead to a high recovery of a pure product at low costs. This study presents a simplified method for large scale poly(3-hydroxybutyrate), poly(3HB), extraction using sodium hypochlorite. Poly(3HB) was extracted from cells of Ralstonia eutropha H16 at almost 96% purity. At different extraction volumes, a maximum recovery rate of 91.32% was obtained. At the largest extraction volume of 50 L, poly(3HB) with an average purity of 93.32% ± 4.62% was extracted with a maximum recovery of 87.03% of the initial poly(3HB) content. This process is easy to handle and requires less efforts than previously described processes.

Extension of the substrate utilization range of Ralstonia eutropha strain H16 by metabolic engineering to include mannose and glucose

The gram-negative facultative chemolithoautotrophic bacterium Ralstonia eutropha strain H16 is known for its narrow carbohydrate utilization range, which limits its use for biotechnological production of polyhydroxyalkanoates and possibly other products from renewable resources. To broaden its substrate utilization range, which is for carbohydrates and related compounds limited to fructose, N-acetylglucosamine, and gluconate, strain H16 was engineered to use mannose and glucose as sole carbon sources for growth. The genes for a facilitated diffusion protein (glf) from Zymomonas mobilis and for a glucokinase (glk), mannofructokinase (mak), and phosphomannose isomerase (pmi) from Escherichia coli were alone or in combination constitutively expressed in R. eutropha strain H16 under the control of the neokanamycin or lac promoter, respectively, using an episomal broad-host-range vector. Recombinant strains harboring pBBR1MCS-3::glf::mak::pmi or pBBR1MCS-3::glf::pmi grew on mannose, whereas pBBR1MCS-3::glf::mak and pBBR1MCS-3::glf did not confer the ability to utilize mannose as a carbon source to R. eutropha. The recombinant strain harboring pBBR1MCS-3::glf::pmi exhibited slower growth on mannose than the recombinant strain harboring pBBR1MCS-3::glf::mak::pmi. These data indicated that phosphomannose isomerase is required to convert mannose-6-phosphate into fructose-6-phosphate for subsequent catabolism via the Entner-Doudoroff pathway. In addition, all plasmids also conferred to R. eutropha the ability to grow in the presence of glucose. The best growth was observed with a recombinant R. eutropha strain harboring plasmid pBBR1MCS-2::P(nk)::glk::glf. In addition, expression of the respective enzymes was demonstrated at the transcriptional and protein levels and by measuring the activities of mannofructokinase (0.622 ± 0.063 U mg(-1)), phosphomannose isomerase (0.251 ± 0.017 U mg(-1)), and glucokinase (0.518 ± 0.040 U mg(-1)). Cells of recombinant strains of R. eutropha synthesized poly(3-hydroxybutyrate) to ca. 65 to 67% (wt/wt) of the cell dry mass in the presence of 1% (wt/vol) glucose or mannose as the sole carbon sources.

Biodegradation of the xenobiotic organic disulphide 4,4′-dithiodibutyric acid by Rhodococcus erythropolis strain MI2 and comparison with the microbial utilization of 3,3′-dithiodipropionic acid and 3,3′-thiodipropionic acid

Application of the non-toxic 3,3′-thiodipropionic acid (TDP) and 3,3′-dithiodipropionic acid (DTDP) as precursors for the microbial production of polythioesters (PTEs), a class of biologically persistent biopolymers containing sulphur in the backbone, was successfully established previously. However, synthesis of PTEs containing 4-mercaptobutyrate (4MB) as building blocks could not be achieved. The very harmful 4MB is not used as a PTE precursor or as the carbon source for growth by any known strain. As a promising alternative, the harmless oxidized disulfide of two molecules of 4MB, 4,4′-dithiodibutyric acid (DTDB), was employed for enrichments of bacterial strains capable of biodegradation. Investigation of novel precursor substrates for PTEs and comparison of respective strains growing on TDP, DTDP and DTDB as sole carbon source was accomplished. A broad variety of bacteria capable of using one of these organic sulphur compounds were isolated and compared. TDP and DTDP were degraded by several strains belonging to different genera, whereas all DTDB-utilizing strains were affiliated to the species Rhodococcus erythropolis. Transposon mutagenesis of R. erythropolis strain MI2 and screening of 7500 resulting mutants yielded three mutants exhibiting impaired growth on DTDB. Physiological studies revealed production of volatile hydrogen sulphide and accumulation of significant amounts of 4MB, 4-oxo-4-sulphanylbutanoic acid and succinic acid in the culture supernatants. Based on this knowledge, a putative pathway for degradation of DTDB was proposed: DTDB could be cleaved into two molecules of 4MB, followed by an oxidation yielding 4-oxo-4-sulphanylbutanoic acid. A putative desulphydrase probably catalyses the abstraction of sulphur, thereby generating succinic acid and hydrogen sulphide.

Pseudorhodoferax soli gen. nov., sp. nov. and Pseudorhodoferax caeni sp. nov., two members of the class Betaproteobacteria belonging to the family Comamonadaceae

A novel betaproteobacterium, strain TBEA3(T), was isolated from soil using enrichment cultures with the organic thioether 3,3'-thiodipropionic acid as sole carbon and energy source. Analysis of the 16S rRNA gene sequence revealed 99.1 % sequence similarities to a poorly characterized member of the family Comamonadaceae, strain SB1(T), which had been previously isolated from activated sludge. Both strains showed highest gene sequence similarities (up to 96.9 %) to members of the genera Rhodoferax and Curvibacter. The DNA G+C contents of strains TBEA3(T) and SB1(T) were 69.1 and 70.1 mol%, respectively, and the DNA-DNA hybridization value between these two strains was 45.3 %. The predominant cellular fatty acids in both strains were C(16 : 0), C(18 : 1)omega7c and summed feature 3 (C(16 : 1)omega7c and/or C(15 : 0) iso 2-OH). The major 3-hydroxy fatty acid was C(10 : 0) 3-OH. Based on the genetic and chemotaxonomic data, strains TBEA3(T) and SB1(T) represent two novel species of a new genus within the family Comamonadaceae, for which the name Pseudorhodoferax gen. nov. is proposed. Strain TBEA3(T) (=LMG 24555(T)=DSM 21634(T)) is assigned to Pseudorhodoferax soli sp. nov., as the type strain of the type species of the genus. Strain SB1(T) (=LMG 24543(T)=DSM 21598(T)) is the type strain of Pseudorhodoferax caeni sp. nov.

Large-scale production of poly(3-hydroxyoctanoic acid) by Pseudomonas putida GPo1 and a simplified downstream process

The suitability of Pseudomonas putida GPo1 for large-scale cultivation and production of poly(3-hydroxyoctanoate) (PHO) was investigated in this study. Three fed-batch cultivations of P. putida GPo1 at the 350- or 400-liter scale in a bioreactor with a capacity of 650 liters were done in mineral salts medium containing initially 20 mM sodium octanoate as the carbon source. The feeding solution included ammonium octanoate, which was fed at a relatively low concentration to promote PHO accumulation under nitrogen-limited conditions. During cultivation, the pH was regulated by addition of NaOH, NH(4)OH, or octanoic acid, which was used as an additional carbon source. Partial O(2) pressure (pO(2)) was adjusted to 20 to 40% by controlling the airflow and stirrer speed. Under the optimized conditions, P. putida GPo1 was able to grow to cell densities as high as 18, 37, and 53 g cells (dry mass) (CDM) per liter containing 49, 55, and 60% (wt/wt) of PHO, respectively. The resulting 40 kg CDM from these three cultivations was used directly for extraction of PHO. Three different methods of extraction of PHO were applied. From these, only acetone extraction showed better performance and resulted in 94% recovery of the PHO contents of cells. A novel mixture of precipitation solvents composed of 70% (vol/vol) methanol and 70% (vol/vol) ethanol was identified in this study. The ratio of PHO concentrate to the mixture was 0.2:1 (vol/vol) and allowed complete precipitation of PHO as white flakes. However, at a ratio of 1:1 (vol/vol) of the solvent mixture to PHO concentrate, a highly purified PHO was obtained. Precipitation yielded a dough-like polymeric material which was cast into thin layers and then shredded into small strips to allow evaporation of the remaining solvents. Gas chromatographic analysis revealed a purity of about 99% +/- 0.2% (wt/wt) of the polymer, which consisted mainly of 3-hydroxyoctanoic acid (96 mol%).

Production and characterization of poly-(3-hydroxybutyrate) from recombinant Escherichia coli grown on cheap renewable carbon substrates

Although the biopolymer poly-(3-hydroxybutyrate), P[3HB], presents physicochemical properties that make it an alternative material to conventional plastics, its biotechnological production is quite expensive. As carbon substrates contribute greatly to P[3HB] production cost, the utilization of a cheaper carbon substrate and less demanding micro-organisms should decrease its cost. In the present study a 2(3) factorial experimental design was applied, aiming to evaluate the effects of using hydrolysed corn starch (HCS) and soybean oil (SBO) as carbon substrates, and cheese whey (CW) supplementation in the mineral medium (MM) on the responses, cell dried weigh (DCW), percentage P[3HB] and mass P[3HB] by recombinant Escherichia coli strains JM101 and DH10B, containing the P[3HB] synthase genes from Cupriavidus necator (ex-Ralstonia eutropha). The analysis of effects indicated that the substrates and the supplement and their interactions had positive effect on CDW. Statistically generated equations showed that, at the highest concentrations of HCS, SO and CW, theoretically it should be possible to produce about 2 g L(- 1) DCW, accumulating 50% P[3HB], in both strains. To complement this study, the strain that presented the best results was cultivated in MM added to HCS, SBO and CW (in best composition observed) and complex medium (CM) to compare the obtained P[3HB] in terms of physicochemical parameters. The obtained results showed that the P[3HB] production in MM (1.29 g L( -1)) was approximately 20% lower than in CM (1.63 g L(- 1)); however, this difference can be compensated by the lower cost of the MM achieved by the use of cheap renewable carbon sources. Moreover, using differential scanning calorimetry and thermogravimetry analyses, it was observed that the polymer produced in MM was the one which presented physicochemical properties (Tg and Tf) that were more similar to those found in the literature for P[3HB].

Perspectives in the Modeling and Optimization of PHB Production by Pure and Mixed Cultures

Poly(beta-hydroxybutyrate) or PHB is an important member of the family of polyhydroxyalkanoates with properties that make it potentially competitive with synthetic polymers. In addition, PHB is biodegradable. While the biochemistry of PHB synthesis by microorganisms is well known, improvement of large-scale productivity requires good fermentation modeling and optimization. The latter aspect is reviewed here. Current models are of two types: (i) mechanistic and (ii) cybernetic. The models may be unstructured or structured, and they have been applied to single cultures and co-cultures. However, neither class of models expresses adequately all the important features of large-scale non-ideal fermentations. Model-independent neural networks provide faithful representations of observations, but they can be difficult to design. So hybrid models, combining mechanistic, cybernetic and neural models, offer a useful compromise. All three kinds of basic models are discussed with applications and directions toward hybrid model development.

Novel pathway for catabolism of the organic sulfur compound 3,3'-dithiodipropionic acid via 3-mercaptopropionic acid and 3-Sulfinopropionic acid to propionyl-coenzyme A by the aerobic bacterium Tetrathiobacter mimigardefordensis strain DPN7

The hitherto unstudied microbial degradation of the organic disulfide 3,3'-dithiodipropionic acid (DTDP) was investigated with the recently described bacterium Tetrathiobacter mimigardefordensis strain DPN7(T) (DSM 17166(T); LMG 22922(T)), which is able to use DTDP as the sole carbon source for growth. 3-Mercaptopropionic acid (3MP) and 3-sulfinopropionic acid (3SP) were detected in the growth medium and occurred as intermediates during DTDP degradation. To identify genes coding for enzymes of DTDP catabolism, Tn5::mob-induced mutants of T. mimigardefordensis were generated. Screening of transposon mutant libraries yielded many mutants fully or partially impaired in utilizing DTDP as a carbon source. Mapping of the insertion loci in some mutants identified four disrupted open reading frames (ORFs) with putative metabolic functions. The ORFs were assigned function on the basis of homologies with lpdA (EC 1.8.1.4), cdo (EC 1.13.11.20), sucCD (EC 6.2.1.5), and acnB (EC 4.2.1.3). Tn5::mob insertions occurred additionally in the vicinity of heat shock protein-encoding genes. The predicted function of the LpdA homologue in T. mimigardefordensis is cleavage of the disulfide bond of DTDP to form two molecules of 3MP. Cdo catalyzes the conversion of the sulfhydryl group of 3MP, yielding the corresponding sulfinic acid, 3SP. SucCD exhibits thiokinase activity, ligating coenzyme A (CoA) with 3SP to form 3SP-CoA. Afterwards, an elimination of sulfite via a putative desulfinase is expected. acnB encodes a putative 2-methylisocitrate dehydratase. Therefore, a new pathway is proposed for the catabolism of DTDP via 3MP, 3SP, and 3SP-CoA toward propionyl-CoA, which is then further catabolized via the 2-methylcitric acid cycle in T. mimigardefordensis.

Solvent stress response of the denitrifying bacterium "Aromatoleum aromaticum" strain EbN1

The denitrifying betaproteobacterium "Aromatoleum aromaticum" strain EbN1 degrades several aromatic compounds, including ethylbenzene, toluene, p-cresol, and phenol, under anoxic conditions. The hydrophobicity of these aromatic solvents determines their toxic properties. Here, we investigated the response of strain EbN1 to aromatic substrates at semi-inhibitory (about 50% growth inhibition) concentrations under two different conditions: first, during anaerobic growth with ethylbenzene (0.32 mM) or toluene (0.74 mM); and second, when anaerobic succinate-utilizing cultures were shocked with ethylbenzene (0.5 mM), toluene (1.2 mM), p-cresol (3.0 mM), and phenol (6.5 mM) as single stressors or as a mixture (total solvent concentration, 2.7 mM). Under all tested conditions impaired growth was paralleled by decelerated nitrate-nitrite consumption. Additionally, alkylbenzene-utilizing cultures accumulated poly(3-hydroxybutyrate) (PHB) up to 10% of the cell dry weight. These physiological responses were also reflected on the proteomic level (as determined by two-dimensional difference gel electrophoresis), e.g., up-regulation of PHB granule-associated phasins, cytochrome cd(1) nitrite reductase of denitrification, and several proteins involved in oxidative (e.g., SodB) and general (e.g., ClpB) stress responses.

Genetic organization of pha gene locus affects phaC expression, poly(hydroxyalkanoate) composition and granule morphology in Pseudomonas corrugata

The complete sequence of the pha locus responsible for the biosynthesis of poly(hydroxyalkanoates) (PHAs) in Pseudomonas corrugata 388 was determined. As with the other known pseudomonad pha gene loci, the one in P. corrugata 388 also consists of phaC1 (1,680 bps; PHA synthase 1), phaZ (858 bp; PHA depolymerase) and phaC2 (1,683 bp; PHA synthase 2) genes. A BLAST search showed that the nucleotide sequences of these genes and the amino-acid sequences of their respective gene products are homologous to those of P. corrugata CFBP5454 and P. mediterranea CFBP5447. A putative intrinsic transcription terminator consisting of a dyad symmetry (24 bp; Delta G = -41.8 kcals) that precedes a stretch of dA residues was located in the phaC1-phaZ intergenic region. P. corrugata mutant-clones XI 32-1 and XI 32-4 were constructed in which this intergenic region was replaced with a selectable kanamycin-resistance gene. These mutant clones when grown on oleic acid for 48 h showed 4.7-to 7.0-fold increases of phaC1 and phaC2 relative expression in comparison to the initial inoculants, whereas the parental strain showed only 1.2- to 1.4-fold increases. Furthermore, in comparison to parental P. corrugata with only a few large PHA inclusion bodies, the mutants grown on oleic acid produce numerous smaller PHA granules that line the periphery of the cells. With glucose as a substrate, XI 32-1 and XI 32-4 clones produce mcl-PHA with a high content (26-31 mol%) of the mono-unsaturated 3-hydroxydodecenoate as a repeat-unit monomer. Our results show for the first time the effects of the phaC1-phaZ intergenic region on the substrate-dependent temporal expression of phaC1 and phaC2 genes, the repeat-unit composition of mcl-PHA, and the morphology of the PHA granules.

A novel-designed Escherichia coli for the production of various polyhydroxyalkanoates from inexpensive substrate mixture

To efficiently produce polyhydroxyalkanoates (PHAs) from substrate mixture containing various carbon sources, Escherichia coli phosphotransferase system (PTS) mutants were constructed, in which the carbon catabolite repression in the presence of glucose was released. When cultivated in the medium containing glucose and xylose, E. coli LR1010, harboring phaC(Re) and phaAB(Re) genes from Ralstronia eutropha, could simultaneously consume glucose and xylose and accumulate short-chain-length PHA, whereas E. coli LR1120 and LR1110, harboring phaC1 gene from Pseudomonas aeruginosa, could accumulate medium-chain-length PHA. At the same time, LR1110 could simultaneously utilize the mixture of glucose and fatty acids. Semiquantitative reverse transcription polymerase chain reaction analysis indicated that disrupting phosphoenolpyruvate: sugar PTS in this strain released the repression on fad genes.

Tetrathiobacter mimigardefordensis sp. nov., isolated from compost, a betaproteobacterium capable of utilizing the organic disulfide 3,3'-dithiodipropionic acid

In this study, a novel betaproteobacterium, strain DPN7(T), was isolated under mesophilic conditions from compost because of its capacity to utilize the organic disulfide 3,3'-dithiodipropionic acid. Analysis of the 16S rRNA gene sequence of strain DPN7(T) revealed 98.5 % similarity to that of Tetrathiobacter kashmirensis LMG 22695(T). Values for sequence similarity to members of the genera Alcaligenes, Castellaniella and Taylorella, the nearest neighbours of the genus Tetrathiobacter, were about 95 % or less. The DNA G + C content of strain DPN7(T) was 55.1 mol%. The level of DNA-DNA hybridization between strain DPN7(T) and T. kashmirensis LMG 22695(T) was 41 %, whereas it was much lower between strain DPN7(T) and Alcaligenes faecalis LMG 1229(T) (7 %) or Castellaniella defragrans LMG 18538(T) (5 %). This genotypic divergence was supported by differences in biochemical and chemotaxonomic characteristics. For this reason, and because of the differences in the protein and fatty acid profiles, strain DPN7(T) should be classified within a novel species of Tetrathiobacter, for which the name Tetrathiobacter mimigardefordensis sp. nov. is proposed. The type strain is strain DPN7(T) (=DSM 17166(T) = LMG 22922(T)).

Synthesis of Short-/Medium-Chain-Length Poly(hydroxyalkanoate) Blends by Mixed Culture Fermentation of Glycerol†

Glycerol was used as a substrate in the bio-production of poly(hydroxyalkanoates) (PHAs) in an effort to establish an alternative outlet for glycerol and produce value-added products. Pseudomonas oleovorans NRRL B-14682 and Pseudomonas corrugata 388 grew and synthesized poly(3-hydroxybutyrate) (P3HB) and medium-chain-length PHA (mcl-PHA) consisting primarily of 3-hydroxydecanoic acid (C(10:0); 44 +/- 2 mol %) and 3-hydroxydodecenoic acid (C(12:1); 31 +/- 2 mol %), respectively, from glycerol at concentrations up to 5% (v/v). Cellular productivity maximized at 40% for P. oleovorans in 5% (v/v) glycerol and 20% for P. corrugata in 2% (v/v) glycerol after 72 h. Increasing the glycerol media concentration from 1% to 5% (v/v) caused a 61% and 72% reduction in the molar mass (M(n)) of the P3HB and mcl-PHA polymers, respectively. Proton-NMR analysis of the glycerol-derived P3HB revealed that the M(n) decrease was the result of esterification of glycerol onto the polymer in a chain terminating position. However, no evidence of glycerol-based chain termination was present in the mcl-PHA. The growth patterns of P. oleovorans and P. corrugata on glycerol permitted their use as mixed cultures to produce natural blends of P3HB and mcl-PHA. By incorporating a staggered inoculation pattern and varying the duration of the fermentations, P3HB/mcl-PHA ratios were achieved that varied from 34:66 to 96:4.

Poly(hydroxyalkanoate) synthase genotype and PHA production of Pseudomonas corrugata and P. mediterranea

A collection of Pseudomonas corrugata and P. mediterranea strains, two closely related species, was evaluated for the presence and variability of pha loci. Using PCR methods that specifically amplify segments of medium-chain-length poly(hydroxyalkanoate) (mcl-PHA) synthase genes, we demonstrated the presence of phaC1 and phaC2 in all P. mediterranea strains tested and in six out of 56 strains of P. corrugata screened. The remaining 50 strains of P. corrugata yielded only the phaC2 subgene fragment on detection by a combined PCR-restriction endonuclease analysis method or a semi-nested PCR-amplification approach. A Southern hybridization study on a representative strain from this group, however, indicated the presence of the phaC1 gene. Nucleic acid sequences of the subgene phaC fragments of the representative strains from the three groups showed an overall similarity ranging from 95% to 100%. The major repeat-unit monomers of the mcl-PHAs isolated from these selected strains are beta-hydroxyoctanoate (33-47 mol%) and beta-hydroxydecanoate (26-36 mol%). These results differentiate for the first time the strains of P. corrugata into two pha-distinguishable groups. This study also documents for the first time the production of mcl-PHA in P. mediterranea.

Polyhydroxyalkanoate (PHA) accumulation in sulfate-reducing bacteria and identification of a class III PHA synthase (PhaEC) in Desulfococcus multivorans

Seven strains of sulfate-reducing bacteria (SRB) were tested for the accumulation of polyhydroxyalkanoates (PHAs). During growth with benzoate Desulfonema magnum accumulated large amounts of poly(3-hydroxybutyrate) [poly(3HB)]. Desulfosarcina variabilis (during growth with benzoate), Desulfobotulus sapovorans (during growth with caproate), and Desulfobacterium autotrophicum (during growth with caproate) accumulated poly(3HB) that accounted for 20 to 43% of cell dry matter. Desulfobotulus sapovorans and Desulfobacterium autotrophicum also synthesized copolyesters consisting of 3-hydroxybutyrate and 3-hydroxyvalerate when valerate was used as the growth substrate. Desulfovibrio vulgaris and Desulfotalea psychrophila were the only SRB tested in which PHAs were not detected. When total DNA isolated from Desulfococcus multivorans and specific primers deduced from highly conserved regions of known PHA synthases (PhaC) were used, a PCR product homologous to the central region of class III PHA synthases was obtained. The complete pha locus of Desulfococcus multivorans was subsequently obtained by inverse PCR, and it contained adjacent phaE(Dm) and phaC(Dm) genes. PhaC(Dm) and PhaE(Dm) were composed of 371 and 306 amino acid residues and showed up to 49 or 23% amino acid identity to the corresponding subunits of other class III PHA synthases. Constructs of phaC(Dm) alone (pBBRMCS-2::phaC(Dm)) and of phaE(Dm)C(Dm) (pBBRMCS-2::phaE(Dm)C(Dm)) in various vectors were obtained and transferred to several strains of Escherichia coli, as well as to the PHA-negative mutants PHB(-)4 and GPp104 of Ralstonia eutropha and Pseudomonas putida, respectively. In cells of the recombinant strains harboring phaE(Dm)C(Dm) small but significant amounts (up to 1.7% of cell dry matter) of poly(3HB) and of PHA synthase activity (up to 1.5 U/mg protein) were detected. This indicated that the cloned genes encode functionally active proteins. Hybrid synthases consisting of PhaC(Dm) and PhaE of Thiococcus pfennigii or Synechocystis sp. strain PCC 6308 were also constructed and were shown to be functionally active.

The glyoxylate bypass of Ralstonia eutropha

The glyoxylate bypass genes aceA1 (isocitrate lyase 1, ICL1), aceA2 (isocitrate lyase 2, ICL2) and aceB1 (malate synthase, MS1) of Ralstonia eutropha HF39 were cloned, sequenced and functionally expressed in Escherichia coli. Interposon-mutants of all three genes (DeltaaceA1, DeltaaceA2 and DeltaaceB1) were constructed, and the phenotypes of the respective mutants were investigated. Whereas R. eutropha HF39DeltaaceA1 retained only 19% of ICL activity and failed to grow on acetate, R. eutropha HF39DeltaaceA2 retained 84% of acetate-inducible ICL activity, and growth on acetate was not retarded. These data suggested that ICL1 is in contrast to ICL2 induced by acetate and specific for the glyoxylate cycle. R. eutropha HF39DeltaaceB1 retained on acetate as well as on gluconate about 41-42% of MS activity and exhibited retarded growth on acetate, indicating the presence of a second hitherto not identified MS in R. eutropha HF39. Whereas in R. eutropha HF39DeltaaceA1 and R. eutropha HF39DeltaaceA2 the yields of poly(3-hydroxybutyric acid), using gluconate as carbon source, were significantly reduced, R. eutropha HF39DeltaaceB1 accumulated the same amount of this polyester from gluconate as well as from acetate as R. eutropha HF39.

Two phenotypically compensating isocitrate dehydrogenases inRalstonia eutropha

The tricarboxylic acid (TCA) cycle enzyme isocitrate dehydrogenase (IDH) and the glyoxylate bypass enzyme isocitrate lyase are involved in catabolism of isocitrate and play a key role in controlling the metabolic flux between the TCA cycle and the glyoxylate shunt. Two IDH genes icd1 and icd2 of Ralstonia eutropha HF39, encoding isocitrate dehydrogenase 1 (IDH1) and isocitrate dehydrogenase 2 (IDH2), were identified and characterized. Icd1 was functionally expressed in Escherichia coli, whereas icd2 was expressed in E. coli but no activity was obtained. Interposon-mutants of icd1 (HF39Deltaicd1) and icd2 (HF39Deltaicd2) of R. eutropha HF39 were constructed and their phenotypes were investigated. HF39Deltaicd1 retained 43% of IDH activity, which was not induced by acetate, and HF39Deltaicd2 expressed 74% of acetate-induced IDH activity. Both HF39Deltaicd1and HF39Deltaicd2 kept the same growth rate on acetate as the wild-type. These data suggested that IDH1 is induced by acetate. The interposon-mutants HF39Deltaicd1 and HF39Deltaicd2 accumulated the same amount of poly(3-hydroxybutyric acid) as the wild-type.

Development of a process for the biotechnological large-scale production of 4-hydroxyvalerate-containing polyesters and characterization of their physical and mechanical properties

A process for the large-scale production of 4-hydroxyvalerate (4HV)-containing biopolyesters with a new monomer composition was developed by means of high-cell-density cultivation applying recombinant strains of Pseudomonas putida and Ralstonia eutropha, harboring the PHA-biosynthesis genes phaC and phaE of Thiocapsa pfennigii. Cell densities of about 20 g/L revealing a PHA content of 52% (w/w) and a molar fraction of 4HV of up to 15.4 mol % were obtained by a two-stage fed-batch cultivation process at a 25-L scale using octanoic acid during the growth phase and levulinic acid for the accumulation of 4HV-containing polyesters. Besides 4HV the polyester contained significant amounts of both 3-hydroxybutyric acid (3HB) and 3-hydroxyvaleric acid (3HV) and traces of 3-hydroxyhexanoic acid (3HHx) and 3-hydroxyoctanoic acid (3HO). With glucose or gluconic acid as the growth substrate, the components of the polyester could be reduced to mainly 3HV and 4HV with only a negligible fraction of 3HB, resulting in a polyester with a new composition. Scale-up of the cultivation process to a 500-L scale was successfully performed, resulting in the production of these polyesters at a pilot plant scale. Short-term shifts in temperature and pH resulted in the formation of cell agglomerates of about 50-100 microm by which the effectiveness of the semicontinuous centrifugation process was drastically increased. Washing of the freeze-dried cells with boiling methanol significantly shortened the extraction process and resulted in a polyester of higher purity. The physical and mechanical properties of these copolyesters were characterized by means of size exclusion chromatography, dynamic mechanical analysis, differential scanning calorimetry, stress-strain measurements, and measurements of the viscosity of the solution. The copolyesters were cast into films, spun to fibers, or processed into test bars by melt spinning and injection molding, respectively. They revealed an almost entirely amorphous structure and consequently were sticky and lacked strength. However they showed high thermal stability and an unusually high elongation at break of about 200%; the molecular weights (M(w)) were between 2.0 x 10(5) and 3.3 x 10(5) g/mol. It was shown that 4HV-containing polyesters belong to the class of thermoplastic elastomeres.

Studies on comonomer compositional distribution of bacterial poly(3-hydroxybutyrate-co-3-hydroxyhexanoate)s and thermal characteristics of their factions

The comonomer-unit compositional distributions have been investigated for bacterial poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) [P(3HB-co-3HH)] samples with 3HH unit content of 13.8, 18.0, 22.0, and 54.0 mol %. They were comonomer compositionally fractionated using chloroform/n-heptane mixed solvent at ambient temperature. The fractionation of P(3HB-co-18.0 mol %3HH) and P(3HB-co-22.0 mol % 3HH), which could not be carried out effectively at room temperature, were refractionated at 70 degrees C in the mixed solvent. Fractions with different 3HH unit content in a wide range (from 4.4 to 80.7 mol %) were obtained. By use of these fractions with narrow compositional distribution, the comonomer composition dependence of thermal properties was investigated by differential scanning calorimetry. The melting point (T(m)) and heat of fusion (DeltaH) decreased as the 3HH unit content increased in the range of low 3HH content (<40 mol %), while they increased as the 3HH unit content increased in the high 3HH content range (>70 mol %). The minimum T(m) and DeltaH values were found to exist at 3HH unit content of about 60 mol %. The glass transition temperature (T(g)) decreased linearly with the increase of 3HH unit content. The values of T(m), DeltaH, and T(g) of P(3HB-co-3HH)s were compared with those of poly(3-hydroxybutyrate-co-3-hydroxyvalerate), poly(3-hydroxybutyrate-co-3-hydroxypropionate), and poly(3-hydroxybutyrate-co-4-hydroxybutyrate), and the effects of comonomer types on the thermal properties were revealed.

Characterization of microbial polythioesters: physical properties of novel copolymers synthesized by Ralstonia eutropha

Various samples of polythioesters with different contents of 3-mercaptopropionic acid (3MP) or 3-mercaptobutyric acid (3MB) as one comonomer and with 3-hydroxybutyric acid (3HB) as the second constituent were produced by cultivating cells of Ralstonia eutropha strain H16 in mineral salts medium containing 3MP or 3MB plus gluconate as carbon sources. Fermentations were done also at the 30-L scale. The various samples were cast as films from chloroform and the following were recorded: melting point, solid-state NMR, X-ray diffraction. The copolyester poly(3HB-co-3MP) displayed mutiple melting peaks corresponding to separate phases rich in 3MP and 3HB. The copolyester poly(3HB-co-3MB) displayed very low crystallinity and melting points higher than that of poly(3HB) when the 3HB content was 40% or less.

Multiple evidence for widespread and general occurrence of type-III PHA synthases in cyanobacteria and molecular characterization of the PHA synthases from two thermophilic cyanobacteria: Chlorogloeopsis fritschii PCC 6912 and Synechococcus sp. strain MA19

Eleven different cyanobacteria were investigated with respect to their capabilities to synthesize poly-3-hydroxybutyrate [poly(3HB)] and the type of poly-beta-hydroxyalkanoic acid (PHA) synthase accounting for the synthesis of this polyester. Several methods, including (i) Southern blot analysis using a phaC-specific DNA probe, (ii) Western blot analysis using specific polyclonal anti-PhaE antibodies raised in this study against PhaE of Synechocystis sp. strain PCC 6803, (iii) generation and sequence analysis of PCR products using phaC-specific oligonucleotides as primers, and/or (iv) cloning and sequence analysis of PHA synthase structural genes, were used to provide evidence for the presence of a type-III PHA synthase in the following cyanobacteria: Synechococcus sp. strains MA19 and PCC 6715, Chlorogloeopsis fritschii PCC 6912, Anabaena cylindrica SAG 1403-2, Cyanothece sp. strains PCC 7424, PCC 8303 and PCC 8801, and Gloeocapsa sp. strain PCC 7428. The screening was compared with corresponding studies using crude protein extracts and genomic DNA of Synechocystis sp. strain PCC 6803, as a positive control, which is so far the only cyanobacterium for which molecular data of the PHA synthase genes are available. No evidence for the presence of a type-III PHA synthase could be obtained for only three of the eleven investigated cyanobacteria (Stanieria sp. strain PCC 7437, Cyanothece sp. strain PCC 8955 and Gloeothece sp. strain PCC 6501). The entire PHA synthase structural genes of the two thermophilic cyanobacteria Synechococcus sp. strain MA19 and Chlorogloeopsis fritschii PCC 6912, and in addition a central region of the phaC gene of Cyanothece sp. strain PCC 8303, were cloned, sequenced and also heterologously expressed in Escherichia coli.