Integration of heterologous genes into the chromosome of Saccharomyces cerevisiae using a delta sequence of yeast retrotransposon Ty

Construction of a machine-learning model to predict the optimal gene expression level for efficient production of D-lactic acid in yeast

The modification of gene expression is being researched in the production of useful chemicals by metabolic engineering of the yeast Saccharomyces cerevisiae. When the expression levels of many metabolic enzyme genes are modified simultaneously, the expression ratio of these genes becomes diverse; the relationship between the gene expression ratio and chemical productivity remains unclear. In other words, it is challenging to predict phenotypes from genotypes. However, the productivity of useful chemicals can be improved if this relationship is clarified. In this study, we aimed to construct a machine-learning model that can be used to clarify the relationship between gene expression levels and D-lactic acid productivity and predict the optimal gene expression level for efficient D-lactic acid production in yeast. A machine-learning model was constructed using data on D-lactate dehydrogenase and glycolytic genes expression (13 dimensions) and D-lactic acid productivity. The coefficient of determination of the completed machine-learning model was 0.6932 when using the training data and 0.6628 when using the test data. Using the constructed machine-learning model, we predicted the optimal gene expression level for high D-lactic acid production. We successfully constructed a machine-learning model to predict both D-lactic acid productivity and the suitable gene expression ratio for the production of D-lactic acid. The technique established in this study could be key for predicting phenotypes from genotypes, a problem faced by recent metabolic engineering strategies.

Genome Assembly and Genetic Traits of the Pleuromutilin-Producer Clitopilus passeckerianus DSM1602

The gilled mushroom Clitopilus passeckerianus (Entolomataceae, Agaricales, Basidiomycota) is well known to produce the terpenoid pleuromutilin, which is the biotechnological basis for medically important antibiotics such as lefamulin and retapamulin. Their unique mode of action and good tolerance entails an increasing demand of pleuromutilin-derived antibiotics in veterinary and human health care. Surprisingly, despite their pharmaceutical importance, no genome sequence is available of any pleuromutilin-producing fungus. Here, we present the high-quality draft genome sequence of the pleuromutilin-producer C. passeckerianus DSM1602 including functional genome annotation. More precisely, we employed a hybrid assembly strategy combining Illumina sequencing and Nanopore sequencing to assemble the mitochondrial genome as well as the nuclear genome. In accordance with the dikaryotic state of the fungus, the nuclear genome has a diploid character. Interestingly, the mitochondrial genome appears duplicated. Bioinformatic analysis revealed a versatile secondary metabolism with an emphasis on terpenoid biosynthetic enzymes in C. passeckerianus and also in related strains. Two alleles of biosynthetic gene clusters for pleuromutilin were found in the genome of C. passeckerianus. The pleuromutilin genes were reassembled with yeast-specific elements for heterologous expression in Saccharomyces cerevisiae. Our work lays the foundation for metabolic strain engineering towards higher yields of the valuable compound pleuromutilin.

Effects of codon optimization, N-terminal truncation and gene dose on the heterologous expression of berberine bridge enzyme

Morphine, sanguinarine and chelerythrine are benzylisoquinoline alkaloids (BIAs), and these compounds possess strong biological activities. (S)-scoulerine is a commonly shared precursor of these compounds, and berberine bridge enzyme (BBE) is a key rate-limiting enzyme in the synthesis of (S)-scoulerine. We isolated the BBE gene from Macleaya cordata (McBBE) and used CEN.PK2-1C as a chassis strain. We compared the catalytic efficiency of five codon-optimized McBBE genes in Saccharomyces cerevisiae and finally obtained a yeast strain (YH03) that exhibited a 58-fold increase in yield (1.12 mg/L). Then, we truncated the N-terminus of McBBE by 8 and 22 amino acids and found that with the increase in the number of N-terminal truncated amino acids, the production of (S)-scoulerine gradually decreased. Additionally, we used CRISPR-Cas9 to integrate the McBBE gene at the delta site of the S. cerevisiae genome to achieve stable genetic inheritance and found that the yield of (S)-scoulerine was not significantly increased in the integrated strain. In conclusion, our work achieved high-efficiency expression of McBBE in S. cerevisiae, explored the influence of N-terminal truncation on the yield of (S)-scoulerine, and obtained a genetically stable S. cerevisiae strain with high McBBE expression. This study provides a reference for further complex metabolic engineering optimization and lays a foundation for the efficient biosynthesis of BIAs.

Assessment of Cre-lox and CRISPR-Cas9 as tools for recycling of multiple-integrated selection markers in Saccharomyces cerevisiae

We evaluated the Cre-lox and CRISPR-Cas9 systems as marker-recycling tools in Saccharomyces cerevisiae recombinants containing multiple-integrated expression cassettes. As an initial trial, we constructed rDNA-nontranscribed spacer- or Ty4-based multiple integration vectors containing the URA3 marker flanked by the loxP sequence. Integrants harboring multiple copies of tHMG1 and NNV-CP expression cassettes were obtained and subsequently transformed with the Cre plasmid. However, the simultaneous pop-out of the expression cassettes along with the URA3 marker hampered the use of Cre-lox as a marker-recycling tool in multiple integrants. As an alternative, we constructed a set of CRISPR-Cas9-gRNA vectors containing gRNA targeted to auxotrophic marker genes. Transformation of multiple integrants of tHMG1 and NNV-CP cassettes by the Cas9-gRNA vector in the presence of the URA3 (stop) donor DNA fragments generated the Ura- transformants retaining multiple copies of the expression cassettes. CRISPR-Cas9-based inactivation led to the recycling of the other markers, HIS3, LEU2, and TRP1, without loss of expression cassettes in the recombinants containing multiple copies of tHMG1, NNV-CP, and SfBGL1 cassettes, respectively. Reuse of the same selection marker in marker-inactivated S. cerevisiae was validated by multiple integrations of the TrEGL2 cassette into the S. cerevisiae strain expressing SfBGL1. These results demonstrate that introducing stop codons into selection marker genes using the CRISPR-Cas9 system with donor DNA fragments is an efficient strategy for markerrecycling in multiple integrants. In particular, the continual reuse of auxotrophic markers would facilitate the construction of a yeast cell factory containing multiple copies of expression cassettes without antibiotic resistance genes.

The Neurospora crassa Inducible Q System Enables Simultaneous Optogenetic Amplification and Inversion in Saccharomyces cerevisiae for Bidirectional Control of Gene Expression

Bidirectional optogenetic control of yeast gene expression has great potential for biotechnological applications. Our group has developed optogenetic inverter circuits that activate transcription using darkness, as well as amplifier circuits that reach high expression levels under limited light. However, because both types of circuits harness Gal4p and Gal80p from the galactose (GAL) regulon they cannot be used simultaneously. Here, we apply the Q System, a transcriptional activator/inhibitor system from Neurospora crassa, to build circuits in Saccharomyces cerevisiae that are inducible using quinic acid, darkness, or blue light. We develop light-repressed OptoQ-INVRT circuits that initiate darkness-triggered transcription within an hour of induction, as well as light-activated OptoQ-AMP circuits that achieve up to 39-fold induction. The Q System does not exhibit crosstalk with the GAL regulon, allowing coutilization of OptoQ-AMP circuits with previously developed OptoINVRT circuits. As a demonstration of practical applications in metabolic engineering, we show how simultaneous use of these circuits can be used to dynamically control both growth and production to improve acetoin production, as well as enable light-tunable co-production of geraniol and linalool, two terpenoids implicated in the hoppy flavor of beer. OptoQ-AMP and OptoQ-INVRT circuits enable simultaneous optogenetic signal amplification and inversion, providing powerful additions to the yeast optogenetic toolkit.

Saccharomyces cerevisiae as host for the recombinant production of polyketides and nonribosomal peptides

As a robust, fast growing and genetically tractable organism, the budding yeast Saccharomyces cerevisiae is one of the most widely used hosts in biotechnology. Its applications range from the manufacturing of vaccines and hormones to bulk chemicals and biofuels. In recent years, major efforts have been undertaken to expand this portfolio to include structurally complex natural products, such as polyketides and nonribosomally synthesized peptides. These compounds often have useful pharmacological properties, which make them valuable drugs for the treatment of infectious diseases, cancer, or autoimmune disorders. In nature, polyketides and nonribosomal peptides are generated by consecutive condensation reactions of short chain acyl-CoAs or amino acids, respectively, with the substrates and reaction intermediates being bound to large, multidomain enzymes. For the reconstitution of these multistep catalytic processes, the enzymatic assembly lines need to be functionally expressed and the required substrates must be supplied in reasonable quantities. Furthermore, the production hosts need to be protected from the toxicity of the biosynthetic products. In this review, we will summarize and evaluate the status quo regarding the heterologous production of polyketides and nonribosomal peptides in S. cerevisiae. Based on a comprehensive literature analysis, prerequisites for a successful pathway reconstitution could be deduced, as well as recurring bottlenecks in this microbial host.

Recent advances in the application of multiplex genome editing in Saccharomyces cerevisiae

Saccharomyces cerevisiae is a widely used microorganism and a greatly popular cell factory for the production of various chemicals. In order to improve the yield of target chemicals, it is often necessary to increase the copy numbers of key genes or engineer the related metabolic pathways, which traditionally required time-consuming repetitive rounds of gene editing. With the development of gene-editing technologies such as meganucleases, TALENs, and the CRISPR/Cas system, multiplex genome editing has entered a period of rapid development to speed up cell factory optimization. Multi-copy insertion and removing bottlenecks in biosynthetic pathways can be achieved through gene integration and knockout, for which multiplexing can be accomplished by targeting repetitive sequences and multiple sites, respectively. Importantly, the development of the CRISPR/Cas system has greatly increased the speed and efficiency of multiplex editing. In this review, the various multiplex genome editing technologies in S. cerevisiae were summarized, and the principles, advantages, and the disadvantages were analyzed and discussed. Finally, the practical applications and future prospects of multiplex genome editing were discussed. KEY POINTS: • The development of multiplex genome editing in S. cerevisiae was summarized. • The pros and cons of various multiplex genome editing technologies are discussed. • Further prospects on the improvement of multiplex genome editing are proposed.

High-yield production of (R)-acetoin in Saccharomyces cerevisiae by deleting genes for NAD(P)H-dependent ketone reductases producing meso-2,3-butanediol and 2,3-dimethylglycerate

Acetoin is widely used in food and cosmetics industries as a taste and fragrance enhancer. To produce (R)-acetoin in Saccharomyces cerevisiae, acetoin biosynthetic genes encoding α-acetolactate synthase (AlsS) and α-acetolactate decarboxylase (AlsD) from Bacillus subtilis and water-forming NADH oxidase (NoxE) from Lactococcus lactis were integrated into delta-sequences in JHY605 strain, where the production of ethanol, glycerol, and (R,R)-2,3-butanediol (BDO) was largely eliminated. We further improved acetoin production by increasing acetoin tolerance by adaptive laboratory evolution, and eliminating other byproducts including meso-2,3-BDO and 2,3-dimethylglycerate, a newly identified byproduct. Ara1, Ypr1, and Ymr226c (named Ora1) were identified as (S)-alcohol-forming reductases, which can reduce (R)-acetoin to meso-2,3-BDO in vitro. However, only Ara1 and Ypr1 contributed to meso-2,3-BDO production in vivo. We elucidate that Ora1, having a substrate preference for (S)-acetoin, reduces (S)-α-acetolactate to 2,3-dimethylglycerate, thus competing with AlsD-mediated (R)-acetoin production. By deleting ARA1, YPR1, and ORA1, 101.3 g/L of (R)-acetoin was produced with a high yield (96% of the maximum theoretical yield) and high stereospecificity (98.2%).

Targeted Integration of Complex Genetic Elements at Multi-Copy Loci by Golden Gate Assembly

Budding yeast Saccharomyces cerevisiae has become a model eukaryotic microorganism for targeted genomic manipulation due to its efficient homologous recombination. A few genomic loci, including rDNA, Delta, and Ty1, can be utilized to introduce variable copies of genetic elements into the yeast genome. Here we describe a method that combines in vitro Golden Gate Assembly to assemble one or a complex genetic element in an orderly manner and then integrate it into predetermined multi-copy loci through homologous recombination. Different transformants may contain different copy numbers, which allows the selection of desired levels of target gene expression.

Developing GDi-CRISPR System for Multi-copy Integration in Saccharomyces cerevisiae

In recent years, Saccharomyces cerevisiae has been widely used in the production of biofuels and value-added chemicals. To stably express the target products, it is necessary to integrate multiple target genes into the chromosome of S. cerevisiae. CRISPR multi-copy integration technology relying on delta sites has been developed, but it often requires the help of high-throughput screening or resistance markers, resulting in non-replicability and high cost. This study aims to develop a low-cost and easy-to-use multi-copy integration tool in S. cerevisiae. Firstly, twenty-one Cas proteins from different microorganisms were tested in S. cerevisiae to find the functional Cas proteins with optimal cleavage ability. Results showed that eight Cas proteins can complete gene editing. However, most of the transformants have low copy numbers, which may be caused by high cutting efficiency exceeding the repair rate. Therefore, the effect of donor translocation order was further investigated. Results showed that 4 copies were obtained by donor first translocation. Then, the gene drive delta site integration system by the CRISPR system (GDi-CRISPR) was developed by combining gene drive principle and CRISPR system. To be clear, the gRNA was put into donor fragments. Then, both of them were integrated into the genome, which can drive further cutting and repair due to increasing number of gRNA. Instead of high-throughput screening or resistance pressure, 6 copies were obtained in only 5-6 days using the GDi-CRISPR system. It is expected to further advance the development of S. cerevisiae multi-copy integration tools.

DNA Double-Strand Break-Induced Gene Amplification in Yeast

Precise control of the gene copy number in the model yeast Saccharomyces cerevisiae may facilitate elucidation of enzyme functions or, in cell factory design, can be used to optimize production of proteins and metabolites. Currently, available methods can provide high gene-expression levels but fail to achieve accurate gene dosage. Moreover, strains generated using these methods often suffer from genetic instability resulting in loss of gene copies during prolonged cultivation. Here we present a method, CASCADE, which enables construction of strains with defined gene copy number. With our present system, gene(s) of interest can be amplified up to nine copies, but the upper copy limit of the system can be expanded. Importantly, the resulting strains can be stably propagated in selection-free media.

Multiplex Genome Engineering Methods for Yeast Cell Factory Development

As biotechnological applications of synthetic biology tools including multiplex genome engineering are expanding rapidly, the construction of strategically designed yeast cell factories becomes increasingly possible. This is largely due to recent advancements in genome editing methods like CRISPR/Cas tech and high-throughput omics tools. The model organism, baker's yeast (Saccharomyces cerevisiae) is an important synthetic biology chassis for high-value metabolite production. Multiplex genome engineering approaches can expedite the construction and fine tuning of effective heterologous pathways in yeast cell factories. Numerous multiplex genome editing techniques have emerged to capitalize on this recently. This review focuses on recent advancements in such tools, such as delta integration and rDNA cluster integration coupled with CRISPR-Cas tools to greatly enhance multi-integration efficiency. Examples of pre-placed gate systems which are an innovative alternative approach for multi-copy gene integration were also reviewed. In addition to multiple integration studies, multiplexing of alternative genome editing methods are also discussed. Finally, multiplex genome editing studies involving non-conventional yeasts and the importance of automation for efficient cell factory design and construction are considered. Coupling the CRISPR/Cas system with traditional yeast multiplex genome integration or donor DNA delivery methods expedites strain development through increased efficiency and accuracy. Novel approaches such as pre-placing synthetic sequences in the genome along with improved bioinformatics tools and automation technologies have the potential to further streamline the strain development process. In addition, the techniques discussed to engineer S. cerevisiae, can be adapted for use in other industrially important yeast species for cell factory development.

Repetitive δ-integration of a cellulase-encoding gene into the chromosome of an industrial Angel Yeast-derived strain by URA3 recycling

Genetic modification of industrial yeast strains often faces more difficulties than that of laboratory strains. Thus, new approaches are still required. In this research, the Angel Yeast-derived haploid strain Kα was genetically modified by multiple rounds of δ-integration, which was achieved via URA3 recycling. Three δ-integrative plasmids, pGδRU, pGδRU-BGL, and pGδRU-EG, were first constructed with two 167 bp δ sequences and a repeat-URA3-repeat fragment. Then, the δ-integrative strains containing the bgl1 or egl2 gene were successfully obtained by one-time transformation of the linearized pGδRU-BGL or pGδRU-EG fragment, respectively. Their counterparts in which the URA3 gene was looped out were also easily isolated by selection for growth on 5´-fluoroorotic acid plates, although the ratio of colonies lacking URA3 to the total number of colonies decreased with increasing copy number of the corresponding integrated cellulase-encoding gene. Similar results were observed during the second round of δ-integration, in which the δ-integration strain Kα(δ::bgl1-repeat) obtained from the first round was transformed with a linearized pGδRU-EG fragment. After 10 rounds of cell growth and transfer to fresh medium, the doubling times and enzyme activities of Kα(δ::bgl1-repeat), Kα(δ::egl2-repeat), and Kα(δ::bgl1-repeat)(δ::egl2-repeat) showed no significant change and were stable. Further, their maximum ethanol concentrations during simultaneous saccharification and fermentation of pretreated corncob over a 7-day period were 46.35, 33.13, and 51.77 g/L, respectively, which were all substantially higher than the parent Kα strain. Thus, repetitive δ-integration with URA3 recycling can be a feasible and valuable method for genetic engineering of Angel Yeast. These results also provide clues about some important issues related to δ-integration, such as the structural stability of δ-integrated genes and the effects of individual integration-site locations on gene expression. Further be elucidation of these issues should help to fully realize the potential of δ-integration-based methods in industrial yeast breeding.

Genomic integration of unclonable gene expression cassettes in Saccharomyces cerevisiae using rapid cloning-free workflows

Most DNA assembly methods require bacterial amplification steps, which restrict its application to genes that can be cloned in the bacterial host without significant toxic effects. However, genes that cannot be cloned in bacteria do not necessarily exert toxic effects on the final host. In order to tackle this issue, we adapted two DNA assembly workflows for rapid, cloning-free construction and genomic integration of expression cassettes in Saccharomyces cerevisiae. One method is based on a modified Gibson assembly, while the other relies on a direct assembly and integration of linear PCR products by yeast homologous recombination. The methods require few simple experimental steps, and their performance was evaluated for the assembly and integration of unclonable zeaxanthin epoxidase expression cassettes in yeast. Results showed that up to 95% integration efficiency can be reached with minimal experimental effort. The presented workflows can be employed as rapid gene integration tools for yeast, especially tailored for integrating unclonable genes.

Yeast genetic interaction screens in the age of CRISPR/Cas

The ease of performing both forward and reverse genetics in Saccharomyces cerevisiae, along with its stable haploid state and short generation times, has made this budding yeast the consummate model eukaryote for genetics. The major advantage of using budding yeast for reverse genetics is this organism's highly efficient homology-directed repair, allowing for precise genome editing simply by introducing DNA with homology to the chromosomal target. Although plasmid- and PCR-based genome editing tools are quite efficient, they depend on rare spontaneous DNA breaks near the target sequence. Consequently, they can generate only one genomic edit at a time, and the edit must be associated with a selectable marker. However, CRISPR/Cas technology is efficient enough to permit markerless and multiplexed edits in a single step. These features have made CRISPR/Cas popular for yeast strain engineering in synthetic biology and metabolic engineering applications, but it has not been widely employed for genetic screens. In this review, we critically examine different methods to generate multi-mutant strains in systematic genetic interaction screens and discuss the potential of CRISPR/Cas to supplement or improve on these methods.

Productive Amyrin Synthases for Efficient α-Amyrin Synthesis in Engineered Saccharomyces cerevisiae

α-Amyrin is a plant-derived pentacyclic triterpenoid, with a lot of important physiological and pharmacological activities. The formation of α-amyrin from (3 S)-2,3-oxidosqualene is catalyzed by α-amyrin synthase (α-AS), a member of the oxidosqualene cyclase (OSC) protein family. However, α-amyrin is not yet commercially developed due to its extremely low productivity in plants. The engineered Saccharomyces cerevisiae with efficient α-amyrin production pathway could be used as an alternative and sustainable solution to produce α-amyrin from renewable raw materials. To efficiently improve α-amyrin production in S. cerevisiae, we identified two α-ASs, EjAS and MdOSC1 from Eriobotrya japonica and Malus × domestica, respectively, through strict bioinformatics screening criteria and phylogenetic analysis. The specific activities of purified EjAS and MdOSC1 were 0.0032 and 0.0293 μmol/min/mg, respectively. EjAS produced α-amyrin and β-amyrin at a ratio of 17:3, MdOSC1 produced α-amyrin, β-amyrin and lupeol at a ratio of 86:13:1, indicating MdOSC1 had significantly higher specific activity and higher ratio of α-amyrin than EjAS. Furthermore, MdOSC1 was introduced into S. cerevisiae combining with the increased supply of (3 S)-2,3-oxidosqualene to achieve the encouraging α-amyrin production, and the titer of α-amyrin achieved 11.97 ± 0.61 mg/L, 5.8 folds of the maximum production reported.

Synthetic biology strategies toward heterologous phytochemical production

This review summarizes the recent progress in heterologous phytochemical biosynthetic pathway reconstitution in plant, bacteria, and yeast, with a focus on the synthetic biology strategies applied in these engineering efforts.

Automated multiplex genome-scale engineering in yeast

Genome-scale engineering is indispensable in understanding and engineering microorganisms, but the current tools are mainly limited to bacterial systems. Here we report an automated platform for multiplex genome-scale engineering in Saccharomyces cerevisiae, an important eukaryotic model and widely used microbial cell factory. Standardized genetic parts encoding overexpression and knockdown mutations of >90% yeast genes are created in a single step from a full-length cDNA library. With the aid of CRISPR-Cas, these genetic parts are iteratively integrated into the repetitive genomic sequences in a modular manner using robotic automation. This system allows functional mapping and multiplex optimization on a genome scale for diverse phenotypes including cellulase expression, isobutanol production, glycerol utilization and acetic acid tolerance, and may greatly accelerate future genome-scale engineering endeavours in yeast.

Global Metabolic Engineering of Glycolytic Pathway via Multicopy Integration in Saccharomyces cerevisiae

The use of renewable feedstocks for producing biofuels and biobased chemicals by engineering metabolic pathways of yeast Saccharomyces cerevisiae has recently become an attractive option. Many researchers attempted to increase glucose consumption rate by overexpressing some glycolytic enzymes because most target biobased chemicals are derived through glycolysis. However, these attempts have met with little success. In this study, to create a S. cerevisiae strain with high glucose consumption rate, we used multicopy integration to develop a global metabolic engineering strategy. Among approximately 350 metabolically engineered strains, YPH499/dPdA3-34 exhibited the highest glucose consumption rate. This strain showed 1.3-fold higher cell growth rate and glucose consumption rate than the control strain. Real-time PCR analysis revealed that transcription levels of glycolysis-related genes such as HXK2, PFK1, PFK2, PYK2, PGI1, and PGK1 in YPH499/dPdA3-34 were increased. Our strategy is thus a promising approach to optimize global metabolic pathways in S. cerevisiae.

CASCADE, a platform for controlled gene amplification for high, tunable and selection-free gene expression in yeast

Over-expression of a gene by increasing its copy number is often desirable in the model yeast Saccharomyces cerevisiae. It may facilitate elucidation of enzyme functions, and in cell factory design it is used to increase production of proteins and metabolites. Current methods are typically exploiting expression from the multicopy 2 μ-derived plasmid or by targeting genes repeatedly into sequences like Ty or rDNA; in both cases, high gene expression levels are often reached. However, with 2 μ-based plasmid expression, the population of cells is very heterogeneous with respect to protein production; and for integration into repeated sequences it is difficult to determine the genetic setup of the resulting strains and to achieve specific gene doses. For both types of systems, the strains often suffer from genetic instability if proper selection pressure is not applied. Here we present a gene amplification system, CASCADE, which enables construction of strains with defined gene copy numbers. One or more genes can be amplified simultaneously and the resulting strains can be stably propagated on selection-free medium. As proof-of-concept, we have successfully used CASCADE to increase heterologous production of two fluorescent proteins, the enzyme β-galactosidase the fungal polyketide 6-methyl salicylic acid and the plant metabolite vanillin glucoside.

Cellulolytic enzyme expression and simultaneous conversion of lignocellulosic sugars into ethanol and xylitol by a new Candida tropicalis strain

BACKGROUND

Lignocellulosic ethanol production involves major steps such as thermochemical pretreatment of biomass, enzymatic hydrolysis of pre-treated biomass and the fermentation of released sugars into ethanol. At least two different organisms are conventionally utilized for producing cellulolytic enzymes and for ethanol production through fermentation, whereas in the present study a single yeast isolate with the capacity to simultaneously produce cellulases and xylanases and ferment the released sugars into ethanol and xylitol has been described.

RESULTS

A yeast strain isolated from soil samples and identified as Candida tropicalis MTCC 25057 expressed cellulases and xylanases over a wide range of temperatures (32 and 42 °C) and in the presence of different cellulosic substrates [carboxymethylcellulose and wheat straw (WS)]. The studies indicated that the cultivation of yeast at 42 °C in pre-treated hydrolysate containing 0.5 % WS resulted in proportional expression of cellulases (exoglucanases and endoglucanases) at concentrations of 114.1 and 97.8 U g(-1) ds, respectively. A high xylanase activity (689.3 U g(-1) ds) was also exhibited by the yeast under similar growth conditions. Maximum expression of cellulolytic enzymes by the yeast occurred within 24 h of incubation. Of the sugars released from biomass after pretreatment, 49 g L(-1) xylose was aerobically converted into 15.8 g L(-1) of xylitol. In addition, 25.4 g L(-1) glucose released after the enzymatic hydrolysis of biomass was fermented by the same yeast to obtain an ethanol titer of 7.3 g L(-1).

CONCLUSIONS

During the present study, a new strain of C. tropicalis was isolated and found to have potential for consolidated bioprocessing (CBP) applications. The strain could grow in a wide range of process conditions (temperature, pH) and in the presence of lignocellulosic inhibitors such as furfural, HMF and acetic acid. The new yeast produced cellulolytic enzymes over a wide temperature range and in the presence of various cellulosic substrates. The cellulolytic enzymes produced by the yeast were effectively used for the hydrolysis of pretreated biomass. The released sugars, xylose and glucose were, respectively, converted into xylitol and ethanol. The potential shown by the new inhibitor tolerant cellulolytic C. tropicalis to produce ethanol or xylitol is of great industrial significance.

EasyCloneMulti: A Set of Vectors for Simultaneous and Multiple Genomic Integrations in Saccharomyces cerevisiae

Saccharomyces cerevisiae is widely used in the biotechnology industry for production of ethanol, recombinant proteins, food ingredients and other chemicals. In order to generate highly producing and stable strains, genome integration of genes encoding metabolic pathway enzymes is the preferred option. However, integration of pathway genes in single or few copies, especially those encoding rate-controlling steps, is often not sufficient to sustain high metabolic fluxes. By exploiting the sequence diversity in the long terminal repeats (LTR) of Ty retrotransposons, we developed a new set of integrative vectors, EasyCloneMulti, that enables multiple and simultaneous integration of genes in S. cerevisiae. By creating vector backbones that combine consensus sequences that aim at targeting subsets of Ty sequences and a quickly degrading selective marker, integrations at multiple genomic loci and a range of expression levels were obtained, as assessed with the green fluorescent protein (GFP) reporter system. The EasyCloneMulti vector set was applied to balance the expression of the rate-controlling step in the β-alanine pathway for biosynthesis of 3-hydroxypropionic acid (3HP). The best 3HP producing clone, with 5.45 g.L^-1 of 3HP, produced 11 times more 3HP than the lowest producing clone, which demonstrates the capability of EasyCloneMulti vectors to impact metabolic pathway enzyme activity.

EasyClone 2.0: expanded toolkit of integrative vectors for stable gene expression in industrial Saccharomyces cerevisiae strains

Saccharomyces cerevisiae is one of the key cell factories for production of chemicals and active pharmaceuticals. For large-scale fermentations, particularly in biorefinery applications, it is desirable to use stress-tolerant industrial strains. However, such strains are less amenable for metabolic engineering than the standard laboratory strains. To enable easy delivery and overexpression of genes in a wide range of industrial S. cerevisiae strains, we constructed a set of integrative vectors with long homology arms and dominant selection markers. The vectors integrate into previously validated chromosomal locations via double cross-over and result in homogenous stable expression of the integrated genes, as shown for several unrelated industrial strains. Cre-mediated marker rescue is possible for removing markers positioned on different chromosomes. To demonstrate the applicability of the presented vector set for metabolic engineering of industrial yeast, we constructed xylose-utilizing strains overexpressing xylose isomerase, xylose transporter and five genes of the pentose phosphate pathway.

High-throughput plasmid construction using homologous recombination in yeast: its mechanisms and application to protein production for X-ray crystallography

Homologous recombination is a system for repairing the broken genomes of living organisms by connecting two DNA strands at their homologous sequences. Today, homologous recombination in yeast is used for plasmid construction as a substitute for traditional methods using restriction enzymes and ligases. This method has various advantages over the traditional method, including flexibility in the position of DNA insertion and ease of manipulation. Recently, the author of this review reported the construction of plasmids by homologous recombination in the methanol-utilizing yeast Pichia pastoris, which is known to be an excellent expression host for secretory proteins and membrane proteins. The method enabled high-throughput construction of expression systems of proteins using P. pastoris; the constructed expression systems were used to investigate the expression conditions of membrane proteins and to perform X-ray crystallography of secretory proteins. This review discusses the mechanisms and applications of homologous recombination, including the production of proteins for X-ray crystallography.

Proximity effect among cellulose-degrading enzymes displayed on the Saccharomyces cerevisiae cell surface

Proximity effect is a form of synergistic effect exhibited when cellulases work within a short distance from each other, and this effect can be a key factor in enhancing saccharification efficiency. In this study, we evaluated the proximity effect between 3 cellulose-degrading enzymes displayed on the Saccharomyces cerevisiae cell surface, that is, endoglucanase, cellobiohydrolase, and β-glucosidase. We constructed 2 kinds of arming yeasts through genome integration: ALL-yeast, which simultaneously displayed the 3 cellulases (thus, the different cellulases were near each other), and MIX-yeast, a mixture of 3 kinds of single-cellulase-displaying yeasts (the cellulases were far apart). The cellulases were tagged with a fluorescence protein or polypeptide to visualize and quantify their display. To evaluate the proximity effect, we compared the activities of ALL-yeast and MIX-yeast with respect to degrading phosphoric acid-swollen cellulose after adjusting for the cellulase amounts. ALL-yeast exhibited 1.25-fold or 2.22-fold higher activity than MIX-yeast did at a yeast concentration equal to the yeast cell number in 1 ml of yeast suspension with an optical density (OD) at 600 nm of 10 (OD10) or OD0.1. At OD0.1, the distance between the 3 cellulases was greater than that at OD10 in MIX-yeast, but the distance remained the same in ALL-yeast; thus, the difference between the cellulose-degrading activities of ALL-yeast and MIX-yeast increased (to 2.22-fold) at OD0.1, which strongly supports the proximity effect between the displayed cellulases. A proximity effect was also observed for crystalline cellulose (Avicel). We expect the proximity effect to further increase when enzyme display efficiency is enhanced, which would further increase cellulose-degrading activity. This arming yeast technology can also be applied to examine proximity effects in other diverse fields.

Improving industrial yeast strains: exploiting natural and artificial diversity

Yeasts have been used for thousands of years to make fermented foods and beverages, such as beer, wine, sake, and bread. However, the choice for a particular yeast strain or species for a specific industrial application is often based on historical, rather than scientific grounds. Moreover, new biotechnological yeast applications, such as the production of second-generation biofuels, confront yeast with environments and challenges that differ from those encountered in traditional food fermentations. Together, this implies that there are interesting opportunities to isolate or generate yeast variants that perform better than the currently used strains. Here, we discuss the different strategies of strain selection and improvement available for both conventional and nonconventional yeasts. Exploiting the existing natural diversity and using techniques such as mutagenesis, protoplast fusion, breeding, genome shuffling and directed evolution to generate artificial diversity, or the use of genetic modification strategies to alter traits in a more targeted way, have led to the selection of superior industrial yeasts. Furthermore, recent technological advances allowed the development of high-throughput techniques, such as 'global transcription machinery engineering' (gTME), to induce genetic variation, providing a new source of yeast genetic diversity.

Challenges and advances in the heterologous expression of cellulolytic enzymes: a review

Second generation biofuel development is increasingly reliant on the recombinant expression of cellulases. Designing or identifying successful expression systems is thus of preeminent importance to industrial progress in the field. Recombinant production of cellulases has been performed using a wide range of expression systems in bacteria, yeasts and plants. In a number of these systems, particularly when using bacteria and plants, significant challenges have been experienced in expressing full-length proteins or proteins at high yield. Further difficulties have been encountered in designing recombinant systems for surface-display of cellulases and for use in consolidated bioprocessing in bacteria and yeast. For establishing cellulase expression in plants, various strategies are utilized to overcome problems, such as the auto-hydrolysis of developing plant cell walls. In this review, we investigate the major challenges, as well as the major advances made to date in the recombinant expression of cellulases across the commonly used bacterial, plant and yeast systems. We review some of the critical aspects to be considered for industrial-scale cellulase production.

Comparison of process configurations for ethanol production from acid- and alkali-pretreated corncob by Saccharomyces cerevisiae strains with and without β-glucosidase expression

β-Glucosidase was shown to have synergistic effects with commercial cellulase in the hydrolysis of acid- and alkali-pretreated corncob, especially at the dose of 5 U/g biomass and 5 or 10 FPU/g biomass. An integrating yeast strain 45# expressing β-glucosidase was constructed that utilized cellobiose quickly and efficiently. Process configurations were compared under conditions of 10% solid content, 10 FPU cellulase/g biomass, 5 U β-glucosidase/g biomass (only used for parental strain W303-1A), 1g/kg yeast loading and 3.3g/kg urea supplementation. While separate hydrolysis and fermentation was optimal for W303-1A and the ethanol titer and yield reached 3.22 g/100g and 75.6% (expressed as a percentage of the theoretical yield), respectively, simultaneous saccharification and fermentation was optimal for strain 45# and the ethanol titer and yield reached 3.31 g/100g and 77.7%, respectively. These results are valuable in optimization of the process configuration and improving the yeast strain selected for cellulosic ethanol production.

Cocktail δ-integration of xylose assimilation genes for efficient ethanol production from xylose in Saccharomyces cerevisiae

Cocktail δ-integration was applied to improve ethanol production from xylose in Saccharomyces cerevisiae. Two hundred of recombinant S. cerevisiae strains possessing various copies of XYL1, XYL2, and XKS1 genes were constructed by cocktail δ-integration. Efficient strains with efficient ethanol production from xylose were successfully obtained by the fermentation test.

Endowing non-cellulolytic microorganisms with cellulolytic activity aiming for consolidated bioprocessing

With the exhaustion of fossil fuels and with the environmental issues they pose, utilization of abundant lignocellulosic biomass as a feedstock for biofuels and bio-based chemicals has recently become an attractive option. Lignocellulosic biomass is primarily composed of cellulose, hemicellulose, and lignin and has a very rigid and complex structure. It is accordingly much more expensive to process than starchy grains because of the need for extensive pretreatment and relatively large amounts of cellulases for efficient hydrolysis. Efficient and cost-effective methods for the production of biofuels and chemicals from lignocellulose are required. A consolidated bioprocess (CBP), which integrates all biological steps consisting of enzyme production, saccharification, and fermentation, is considered a promising strategy for reducing production costs. Establishing an efficient CBP using lignocellulosic biomass requires both lignocellulose degradation into glucose and efficient production of biofuels or chemicals from glucose. With this aim, many researchers are attempting to endow selected microorganisms with lignocellulose-assimilating ability. In this review, we focus on studies aimed at conferring lignocellulose-assimilating ability not only to yeast strains but also to bacterial strains by recombinant technology. Recent developments in improvement of enzyme productivity by microorganisms and in improvement of the specific activity of cellulase are emphasized.

Site-specific integration of heterologous genes in yeast via Ty3 retrotransposition

The Ty3 retrotransposon of Saccharomyces cerevisiae was employed for the site-specific integration of heterologous genes into the yeast genome. A GAL-regulated promoter allowed induction of the retrotransposition process, and a bacterial neo(r) gene inserted in the Ty3 element was used as a selectable model heterologous gene. The frequency of transposition of this neo(r)-marked element was found to be comparable to that of an unmarked element. Three amplification systems were constructed; the systems varied with respect to the location and number of the GAL-regulated helper and neo(r)-marked Ty3 elements. For all three systems, neo(r) integrations were readily selected with a maximum of two insertions obtained per round of amplification. A sequential amplification strategy was effective for further increasing the number of integrated cloned genes, and families of strains varying by only one neo(r) insertion were easily obtained. Resistance to the antibiotic G418 correlated well with the number of integrated neo(r) genes, and Northern blots verified the relationship between cloned gene number (up to four) and neo(r) expression. Structural stability of the integrated genes was also demonstrated. By controlling the number of rounds of amplification and the level of G418 selection, precise numbers of integrated heterologous genes could be obtained. Because the amplification process can be repeated using different cloned genes inserted in the Ty3 element, these results demonstrate the potential of retrotransposition for the regulated integration of a series of different genes at nondeleterious chromosomal locations.

Introduction and expression of genes for metabolic engineering applications in Saccharomyces cerevisiae

Metabolic pathway engineering in the yeast Saccharomyces cerevisiae leads to improved production of a wide range of compounds, ranging from ethanol (from biomass) to natural products such as sesquiterpenes. The introduction of multienzyme pathways requires precise control over the level and timing of expression of the associated genes. Gene number and promoter strength/regulation are two critical control points, and multiple studies have focused on modulating these in yeast. This MiniReview focuses on methods for introducing genes and controlling their copy number and on the many promoters (both constitutive and inducible) that have been successfully employed. The advantages and disadvantages of the methods will be presented, and applications to pathway engineering will be highlighted.

Advancing secondary metabolite biosynthesis in yeast with synthetic biology tools

Secondary metabolites are an important source of high-value chemicals, many of which exhibit important pharmacological properties. These valuable natural products are often difficult to synthesize chemically and are commonly isolated through inefficient extractions from natural biological sources. As such, they are increasingly targeted for production by biosynthesis from engineered microorganisms. The budding yeast species Saccharomyces cerevisiae has proven to be a powerful microorganism for heterologous expression of biosynthetic pathways. S. cerevisiae's usefulness as a host organism is owed in large part to the wealth of knowledge accumulated over more than a century of intense scientific study. Yet many challenges are currently faced in engineering yeast strains for the biosynthesis of complex secondary metabolite production. However, synthetic biology is advancing the development of new tools for constructing, controlling, and optimizing complex metabolic pathways in yeast. Here, we review how the coupling between yeast biology and synthetic biology is advancing the use of S. cerevisiae as a microbial host for the construction of secondary metabolic pathways.

Gene copy number and polyploidy on products formation in yeast

Yeast, such as Saccharomyces cerevisiae or Kluyveromyces lactis is appropriate strain for ethanol production or some useful compounds production. Cellulases expressing yeast can ferment ethanol from cellulosic materials; however, the productivity should be increase more and more. To improve and engineer the productivity, the target gene(s) were introduced into yeast genome. Generally, using genetic engineering, increasing integrated gene numbers are increased, the expressed protein ability such as enzymatic activities are also increased. In this mini-review, we focused on the effect of integrated gene copy number and the polyploidy on the productivity such as enzymatic activity and/or product yield.

Cocktail delta-integration: a novel method to construct cellulolytic enzyme expression ratio-optimized yeast strains

Background

The filamentous fungus T. reesei effectively degrades cellulose and is known to produce various cellulolytic enzymes such as β-glucosidase, endoglucanase, and cellobiohydrolase. The expression levels of each cellulase are controlled simultaneously, and their ratios and synergetic effects are important for effective cellulose degradation. However, in recombinant Saccharomyces cerevisiae, it is difficult to simultaneously control many different enzymes. To construct engineered yeast with efficient cellulose degradation, we developed a simple method to optimize cellulase expression levels, named cocktail δ-integration.

Results

In cocktail δ-integration, several kinds of cellulase expression cassettes are integrated into yeast chromosomes simultaneously in one step, and strains with high cellulolytic activity (i.e., expressing an optimum ratio of cellulases) are easily obtained. Although the total integrated gene copy numbers of cocktail δ-integrant strain was about half that of a conventional δ-integrant strain, the phosphoric acid swollen cellulose (PASC) degradation activity (64.9 mU/g-wet cell) was higher than that of a conventional strain (57.6 mU/g-wet cell). This suggests that optimization of the cellulase expression ratio improves PASC degradation activity more so than overexpression.

Conclusions

To our knowledge, this is the first report on the expression of cellulase genes by δ-integration and optimization of various foreign genes by δ-integration in yeast. This method should be very effective and easily applied for other multi-enzymatic systems using recombinant yeast.

Overproduction of geranylgeraniol by metabolically engineered Saccharomyces cerevisiae

(E, E, E)-Geranylgeraniol (GGOH) is a valuable starting material for perfumes and pharmaceutical products. In the yeast Saccharomyces cerevisiae, GGOH is synthesized from the end products of the mevalonate pathway through the sequential reactions of farnesyl diphosphate synthetase (encoded by the ERG20 gene), geranylgeranyl diphosphate synthase (the BTS1 gene), and some endogenous phosphatases. We demonstrated that overexpression of the diacylglycerol diphosphate phosphatase (DPP1) gene could promote GGOH production. We also found that overexpression of a BTS1-DPP1 fusion gene was more efficient for producing GGOH than coexpression of these genes separately. Overexpression of the hydroxymethylglutaryl-coenzyme A reductase (HMG1) gene, which encodes the major rate-limiting enzyme of the mevalonate pathway, resulted in overproduction of squalene (191.9 mg liter(-1)) rather than GGOH (0.2 mg liter(-1)) in test tube cultures. Coexpression of the BTS1-DPP1 fusion gene along with the HMG1 gene partially redirected the metabolic flux from squalene to GGOH. Additional expression of a BTS1-ERG20 fusion gene resulted in an almost complete shift of the flux to GGOH production (228.8 mg liter(-1) GGOH and 6.5 mg liter(-1) squalene). Finally, we constructed a diploid prototrophic strain coexpressing the HMG1, BTS1-DPP1, and BTS1-ERG20 genes from multicopy integration vectors. This strain attained 3.31 g liter(-1) GGOH production in a 10-liter jar fermentor with gradual feeding of a mixed glucose and ethanol solution. The use of bifunctional fusion genes such as the BTS1-DPP1 and ERG20-BTS1 genes that code sequential enzymes in the metabolic pathway was an effective method for metabolic engineering.

Progress in metabolic engineering of Saccharomyces cerevisiae

The traditional use of the yeast Saccharomyces cerevisiae in alcoholic fermentation has, over time, resulted in substantial accumulated knowledge concerning genetics, physiology, and biochemistry as well as genetic engineering and fermentation technologies. S. cerevisiae has become a platform organism for developing metabolic engineering strategies, methods, and tools. The current review discusses the relevance of several engineering strategies, such as rational and inverse metabolic engineering, evolutionary engineering, and global transcription machinery engineering, in yeast strain improvement. It also summarizes existing tools for fine-tuning and regulating enzyme activities and thus metabolic pathways. Recent examples of yeast metabolic engineering for food, beverage, and industrial biotechnology (bioethanol and bulk and fine chemicals) follow. S. cerevisiae currently enjoys increasing popularity as a production organism in industrial ("white") biotechnology due to its inherent tolerance of low pH values and high ethanol and inhibitor concentrations and its ability to grow anaerobically. Attention is paid to utilizing lignocellulosic biomass as a potential substrate.

Development of stable flocculent Saccharomyces cerevisiae strain for continuous Aspergillus niger β-galactosidase production

A flocculent Saccharomyces cerevisiae strain was engineered to stably secrete Aspergillus niger beta-galactosidase in a continuous high-cell-density bioreactor. The delta-sequences from the yeast retrotransposon Ty1 were used as target sites for the integration of the beta-galactosidase expression cassette. High-copy-number transformants were successfully obtained using the delta-integration system together with the dominant selection antibiotic, G418. The integration of multiple copies was confirmed by genomic Southern blot analysis. Integrants with the highest beta-galactosidase levels (approximately eight gene copies) had similar beta-galactosidase activities as a recombinant strain carrying the beta-galactosidase expression cassette in a YEp-based vector. The beta-galactosidase expression cassettes integrated into the yeast genome were stably maintained after eight sequential batch cultures in a nonselective medium. In continuous high-cell-density culture under the same operating conditions, the integrant strain was more stable than the plasmid-carrying strain. To our knowledge, this is the first study of multicopy delta-integrant stability in a continuous bioreactor operating at different dilution rates.

Integration of Metal-Resistant Determinants from the Plasmid of an Acidocella Strain into the Chromosome of Escherichia coli DH5?*

Acidophilic bacteria of mine origin are ideal systems for studying microbial metal resistance because of their ability to grow in the presence of high concentrations of metal salts. We have previously shown that the metal-resistant transformants obtained after transformation of Escherichia coli DH5alpha with plasmid DNA preparation from Acidocella sp. strain GS19h did not contain any plasmid suggesting chromosomal integration of the plasmid(s) (Appl Environ Microbiol 1997; 63: 4523-4527). The present study provides evidence in support of this suggestion. The pulsed field gel electrophoresis (PFGE) pattern of genomic DNA of the plasmidless metal-resistant transformants differed markedly from that of the untransformed DH5alpha strain. Moreover, when the recombinant plasmids constructed by cloning plasmid DNA fragments of the Acidocella strain GS19h in the vector pBluescript II KS+ were used to transform E. coli DH5alpha strain, no plasmid DNA was detected in some of the zinc- and ampicillin-resistant (ZnrAmpr) clones. The PFGE pattern of genomic DNA of such a transformed clone also differed markedly from that of the parent strain, suggesting chromosomal integration of the recombinant plasmid(s) containing both ampicillin- and zinc-resistance determinants. This observation was further supported by hybridization of chromosomal DNA of the plasmidless ZnrAmpr E. coli DH5alpha clone with the probes made from the plasmid DNA of strain GS19h and the vector DNA. Thus, this study corroborates our previous finding and documents the phenomenon of integration of metal-resistant determinants from the Acidocella GS19h plasmid(s) into the chromosome of E. coli DH5alpha.