Genetic dissection of height in maritime pine seedlings raised under accelerated growth conditions

Analysis of Growth Trajectories and Verification of Related SNPs in Populus deltoides

As an important timber genus with high economic and ecological values, Populus is a model for dissecting the genetic architecture of growth traits in perennial forest trees. However, the genetic mechanisms of longitudinal growth traits in poplar remain incompletely understood. In this study, we conducted longitudinal genetic analysis of height and diameter at breast height (DBH) in eleven-year poplar clones using ultra-deep sequencing datasets. We compared four S-shaped growth models, including asymptotic, Gompertz, logistic, and Richard, on eleven-year height and DBH records in terms of five metrics. We constructed the best-fitting growth model (Richard) and determined poplar ontogenetic stages by virtue of growth curve fitting and likelihood ratio testing. This study provides some scientific clues for temporal variation of longitudinal growth traits in Populus species.

Genome-wide association study of multiyear dynamic growth traits in hybrid Liriodendron identifies robust genetic loci associated with growth trajectories

The genetic factors underlying growth traits differ over time points or stages. However, most current studies of phenotypes at single time points do not capture all loci or explain the genetic differences underlying growth trajectories. Hybrid Liriodendron exhibits obvious heterosis and is widely cultivated, although its complex genetic mechanism underlying growth traits remains unknown. A genome-wide association study (GWAS) is an effective method for elucidating the genetic architecture by identifying genetic loci underlying complex quantitative traits. In the present study, using a GWAS, we identified robust loci associated with growth trajectories in hybrid Liriodendron populations. We selected 233 hybrid progenies derived from 25 crosses for resequencing, and measured their tree height (H) and diameter at breast height (DBH) for 11 consecutive years; 192 972 high-quality single nucleotide polymorphisms (SNPs) were obtained. The dynamics of the multiyear single-trait GWAS showed that year-specific SNPs predominated, and only five robust SNPs for DBH were identified in at least three different years. Multitrait GWAS analysis with model parameters as latent variables also revealed 62 SNPs for H and 52 for DBH associated with the growth trajectory, displaying different biomass accumulation patterns, among which four SNPs exerted pleiotropic effects. All identified SNPs also exhibited temporal variations in effect sizes and inheritance patterns potentially related to different growth and developmental stages. The haplotypes resulting from these significant SNPs might pyramid favorable loci, benefitting the selection of superior genotypes. The present study provides insights into the genetic architecture of dynamic growth traits and lays a basis for future molecular-assisted breeding.

Identifying and testing marker-trait associations for growth and phenology in three pine species: Implications for genomic prediction

In tree species, genomic prediction offers the potential to forecast mature trait values in early growth stages, if robust marker-trait associations can be identified. Here we apply a novel multispecies approach using genotypes from a new genotyping array, based on 20,795 single nucleotide polymorphisms (SNPs) from three closely related pine species (Pinus sylvestris, Pinus uncinata and Pinus mugo), to test for associations with growth and phenology data from a common garden study. Predictive models constructed using significantly associated SNPs were then tested and applied to an independent multisite field trial of P. sylvestris and the capability to predict trait values was evaluated. One hundred and eighteen SNPs showed significant associations with the traits in the pine species. Common SNPs (MAF > 0.05) associated with bud set were only found in genes putatively involved in growth and development, whereas those associated with growth and budburst were also located in genes putatively involved in response to environment and, to a lesser extent, reproduction. At one of the two independent sites, the model we developed produced highly significant correlations between predicted values and observed height data (YA, height 2020: r = 0.376, p < 0.001). Predicted values estimated with our budburst model were weakly but positively correlated with duration of budburst at one of the sites (GS, 2015: r = 0.204, p = 0.034; 2018: r = 0.205, p = 0.034-0.037) and negatively associated with budburst timing at the other (YA: r = -0.202, p = 0.046). Genomic prediction resulted in the selection of sets of trees whose mean height was taller than the average for each site. Our results provide tentative support for the capability of prediction models to forecast trait values in trees, while highlighting the need for caution in applying them to trees grown in different environments.

A high-density genetic map of Schima superba based on its chromosomal characteristics

BACKGROUND

Schima superba (Theaceae) is a popular woody tree in China. The obscure chromosomal characters of this species are a limitation in the development of high-density genetic linkage maps, which are valuable resources for molecular breeding and functional genomics.

RESULTS

We determined the chromosome number and the karyotype of S. superba as 2n = 36 = 36 m, which is consistent with the tribe Schimeae (n = 18). A high-density genetic map was constructed using genotyping by sequencing (GBS). A F1 full-sib with 116 individuals and their parents (LC31 × JO32) were sequenced on the Illumina HiSeq™ platform. Overall, 343.3 Gb of raw data containing 1,191,933,474 paired-end reads were generated. Based on this, 99,966 polymorphic SNP markers were developed from the parents, and 2209 markers were mapped onto the integrated genetic linkage map after data filtering and SNP genotyping. The map spanned 2076.24 cM and was distributed among 18 linkage groups. The average marker interval was 0.94 cM. A total of 168 quantitative trait loci (QTLs) for 14 growth traits were identified.

CONCLUSIONS

The chromosome number and karyotype of S. superba was 2n = 36 = 36 m and a linkage map with 2209 SNP markers was constructed to identify QTLs for growth traits. Our study provides a basis for molecular-assisted breeding and genomic studies, which will contribute towards the future research and genetic improvement of S. superba.

Identification of novel putative causative genes and genetic marker for male sterility in Japanese cedar (Cryptomeria japonica D.Don)

Background

Japanese cedar (Cryptomeria japonica) is an important tree for Japanese forestry. Male-sterile marker development in Japanese cedar would facilitate selection of male-sterile plus trees, addressing the widespread social problem of pollinosis and facilitating the identification of heterozygotes, which are useful for breeding.

Results

This study used next-generation sequencing for single-nucleotide polymorphism discovery in libraries constructed from several organs, including male-sterile and male-fertile strobili. The single-nucleotide polymorphisms obtained were used to construct a high-density linkage map, which enabled identification of a locus on linkage group 9 strongly correlated with male-sterile trait. Expressed sequence tags corresponding to 11 marker loci from 5 isotigs were associated with this locus within 33.4-34.5 cM. These marker loci explained 100% of the phenotypic variation. Several homologs of these sequences are associated with male sterility in rice or Arabidopsis, including a pre-mRNA splicing factor, a DEAD-box protein, a glycosyl hydrolase, and a galactosyltransferase. These proteins are thus candidates for the causal male-sterile gene at the ms-1 locus. After we used a SNaPshot assay to develop markers for marker-assisted selection (MAS), we tested F₂ progeny between male-sterile and wild-type plus trees to validate the markers and extrapolated the testing to a larger plus-tree population. We found that two developed from one of the candidates for the causal gene were suitable for MAS.

Conclusions

More than half of the ESTs and SNPs we collected were new, enlarging the genomic basis for genetic research on Japanese cedar. We developed two SNP markers aimed at MAS that distinguished individuals carrying the male-sterile trait with 100% accuracy, as well as individuals heterozygous at the male-sterile locus, even outside the mapping population. These markers should enable practical MAS for conifer breeding.

Electronic supplementary material

The online version of this article (10.1186/s12864-018-4581-5) contains supplementary material, which is available to authorized users.

Quantitative trait loci influencing forking defects in an outbred pedigree of loblolly pine

Background

The use of wood as an industrial raw material has led to development of plantation forestry, in which trees are planted, managed, and harvested as crops. The productivity of such plantations often exceeds that of less-intensively-managed forests, and land managers have the option of choosing specific planting stock to produce specific types of wood for industrial use. Stem forking, or division of the stem into two or more stems of roughly equal size, is a character trait important in determining the quality of the stem for production of solid wood products. This trait typically has very low individual-tree heritability, but can be more accurately assessed in clonally-replicated plantings where each genotype is represented by several individual trees. We report results from a quantitative trait mapping experiment in a clonally-replicated full-sibling family of loblolly pine (Pinus taeda L.).

Results

Quantitative trait loci influencing forking defects were identified in an outbred full-sibling family of loblolly pine, using single-nucleotide polymorphism markers. Genetic markers in this family segregated either in 1:2:1 (F2 intercross-like segregation) or 1:1 ratio (backcross-like segregation). An integrated linkage map combining markers with different segregation ratios was assembled for this full-sib family, and a total of 409 SNP markers were mapped on 12 linkage groups, covering 1622 cM. Two and three trait loci were identified for forking and ramicorn branch traits, respectively, using the interval mapping method. Three trait loci were detected for both traits using multiple-trait analysis.

Conclusions

The detection of three loci for forking and ramicorn branching in a multiple-trait analysis could mean that there are genes with pleiotropic effects on both traits, or that separate genes affecting different traits are clustered together. The detection of genetic loci associated with variation in stem quality traits in this study supports the hypothesis that marker-assisted selection can be used to decrease the rate of stem defects in breeding populations of loblolly pine.

Electronic supplementary material

The online version of this article (doi:10.1186/s12863-016-0446-6) contains supplementary material, which is available to authorized users.

Integrating mixed-effect models into an architectural plant model to simulate inter- and intra-progeny variability: a case study on oil palm (Elaeis guineensis Jacq.)

Three-dimensional (3D) reconstruction of plants is time-consuming and involves considerable levels of data acquisition. This is possibly one reason why the integration of genetic variability into 3D architectural models has so far been largely overlooked. In this study, an allometry-based approach was developed to account for architectural variability in 3D architectural models of oil palm (Elaeis guineensis Jacq.) as a case study. Allometric relationships were used to model architectural traits from individual leaflets to the entire crown while accounting for ontogenetic and morphogenetic gradients. Inter- and intra-progeny variabilities were evaluated for each trait and mixed-effect models were used to estimate the mean and variance parameters required for complete 3D virtual plants. Significant differences in leaf geometry (petiole length, density of leaflets, and rachis curvature) and leaflet morphology (gradients of leaflet length and width) were detected between and within progenies and were modelled in order to generate populations of plants that were consistent with the observed populations. The application of mixed-effect models on allometric relationships highlighted an interesting trade-off between model accuracy and ease of defining parameters for the 3D reconstruction of plants while at the same time integrating their observed variability. Future research will be dedicated to sensitivity analyses coupling the structural model presented here with a radiative balance model in order to identify the key architectural traits involved in light interception efficiency.

Functional multi-locus QTL mapping of temporal trends in Scots pine wood traits

Quantitative trait loci (QTL) mapping of wood properties in conifer species has focused on single time point measurements or on trait means based on heterogeneous wood samples (e.g., increment cores), thus ignoring systematic within-tree trends. In this study, functional QTL mapping was performed for a set of important wood properties in increment cores from a 17-yr-old Scots pine (Pinus sylvestris L.) full-sib family with the aim of detecting wood trait QTL for general intercepts (means) and for linear slopes by increasing cambial age. Two multi-locus functional QTL analysis approaches were proposed and their performances were compared on trait datasets comprising 2 to 9 time points, 91 to 455 individual tree measurements and genotype datasets of amplified length polymorphisms (AFLP), and single nucleotide polymorphism (SNP) markers. The first method was a multilevel LASSO analysis whereby trend parameter estimation and QTL mapping were conducted consecutively; the second method was our Bayesian linear mixed model whereby trends and underlying genetic effects were estimated simultaneously. We also compared several different hypothesis testing methods under either the LASSO or the Bayesian framework to perform QTL inference. In total, five and four significant QTL were observed for the intercepts and slopes, respectively, across wood traits such as earlywood percentage, wood density, radial fiberwidth, and spiral grain angle. Four of these QTL were represented by candidate gene SNPs, thus providing promising targets for future research in QTL mapping and molecular function. Bayesian and LASSO methods both detected similar sets of QTL given datasets that comprised large numbers of individuals.

Genetic control of functional traits related to photosynthesis and water use efficiency in Pinus pinaster Ait. drought response: integration of genome annotation, allele association and QTL detection for candidate gene identification

BACKGROUND

Understanding molecular mechanisms that control photosynthesis and water use efficiency in response to drought is crucial for plant species from dry areas. This study aimed to identify QTL for these traits in a Mediterranean conifer and tested their stability under drought.

RESULTS

High density linkage maps for Pinus pinaster were used in the detection of QTL for photosynthesis and water use efficiency at three water irrigation regimes. A total of 28 significant and 27 suggestive QTL were found. QTL detected for photochemical traits accounted for the higher percentage of phenotypic variance. Functional annotation of genes within the QTL suggested 58 candidate genes for the analyzed traits. Allele association analysis in selected candidate genes showed three SNPs located in a MYB transcription factor that were significantly associated with efficiency of energy capture by open PSII reaction centers and specific leaf area.

CONCLUSIONS

The integration of QTL mapping of functional traits, genome annotation and allele association yielded several candidate genes involved with molecular control of photosynthesis and water use efficiency in response to drought in a conifer species. The results obtained highlight the importance of maintaining the integrity of the photochemical machinery in P. pinaster drought response.

Towards decoding the conifer giga-genome

Several new initiatives have been launched recently to sequence conifer genomes including pines, spruces and Douglas-fir. Owing to the very large genome sizes ranging from 18 to 35 gigabases, sequencing even a single conifer genome had been considered unattainable until the recent throughput increases and cost reductions afforded by next generation sequencers. The purpose of this review is to describe the context for these new initiatives. A knowledge foundation has been acquired in several conifers of commercial and ecological interest through large-scale cDNA analyses, construction of genetic maps and gene mapping studies aiming to link phenotype and genotype. Exploratory sequencing in pines and spruces have pointed out some of the unique properties of these giga-genomes and suggested strategies that may be needed to extract value from their sequencing. The hope is that recent and pending developments in sequencing technology will contribute to rapidly filling the knowledge vacuum surrounding their structure, contents and evolution. Researchers are also making plans to use comparative analyses that will help to turn the data into a valuable resource for enhancing and protecting the world's conifer forests.

Simultaneous estimation of multiple quantitative trait loci and growth curve parameters through hierarchical Bayesian modeling

A novel hierarchical quantitative trait locus (QTL) mapping method using a polynomial growth function and a multiple-QTL model (with no dependence in time) in a multitrait framework is presented. The method considers a population-based sample where individuals have been phenotyped (over time) with respect to some dynamic trait and genotyped at a given set of loci. A specific feature of the proposed approach is that, instead of an average functional curve, each individual has its own functional curve. Moreover, each QTL can modify the dynamic characteristics of the trait value of an individual through its influence on one or more growth curve parameters. Apparent advantages of the approach include: (1) assumption of time-independent QTL and environmental effects, (2) alleviating the necessity for an autoregressive covariance structure for residuals and (3) the flexibility to use variable selection methods. As a by-product of the method, heritabilities and genetic correlations can also be estimated for individual growth curve parameters, which are considered as latent traits. For selecting trait-associated loci in the model, we use a modified version of the well-known Bayesian adaptive shrinkage technique. We illustrate our approach by analysing a sub sample of 500 individuals from the simulated QTLMAS 2009 data set, as well as simulation replicates and a real Scots pine (Pinus sylvestris) data set, using temporal measurements of height as dynamic trait of interest.

Association genetics of wood physical traits in the conifer white spruce and relationships with gene expression

Marker-assisted selection holds promise for highly influencing tree breeding, especially for wood traits, by considerably reducing breeding cycles and increasing selection accuracy. In this study, we used a candidate gene approach to test for associations between 944 single-nucleotide polymorphism markers from 549 candidate genes and 25 wood quality traits in white spruce. A mixed-linear model approach, including a weak but nonsignificant population structure, was implemented for each marker-trait combination. Relatedness among individuals was controlled using a kinship matrix estimated either from the known half-sib structure or from the markers. Both additive and dominance effect models were tested. Between 8 and 21 single-nucleotide polymorphisms (SNPs) were found to be significantly associated (P ≤ 0.01) with each of earlywood, latewood, or total wood traits. After controlling for multiple testing (Q ≤ 0.10), 13 SNPs were still significant across as many genes belonging to different families, each accounting for between 3 and 5% of the phenotypic variance in 10 wood characters. Transcript accumulation was determined for genes containing SNPs associated with these traits. Significantly different transcript levels (P ≤ 0.05) were found among the SNP genotypes of a 1-aminocyclopropane-1-carboxylate oxidase, a β-tonoplast intrinsic protein, and a long-chain acyl-CoA synthetase 9. These results should contribute toward the development of efficient marker-assisted selection in an economically important tree species.

QTL mapping in white spruce: gene maps and genomic regions underlying adaptive traits across pedigrees, years and environments

BACKGROUND

The genomic architecture of bud phenology and height growth remains poorly known in most forest trees. In non model species, QTL studies have shown limited application because most often QTL data could not be validated from one experiment to another. The aim of our study was to overcome this limitation by basing QTL detection on the construction of genetic maps highly-enriched in gene markers, and by assessing QTLs across pedigrees, years, and environments.

RESULTS

Four saturated individual linkage maps representing two unrelated mapping populations of 260 and 500 clonally replicated progeny were assembled from 471 to 570 markers, including from 283 to 451 gene SNPs obtained using a multiplexed genotyping assay. Thence, a composite linkage map was assembled with 836 gene markers.For individual linkage maps, a total of 33 distinct quantitative trait loci (QTLs) were observed for bud flush, 52 for bud set, and 52 for height growth. For the composite map, the corresponding numbers of QTL clusters were 11, 13, and 10. About 20% of QTLs were replicated between the two mapping populations and nearly 50% revealed spatial and/or temporal stability. Three to four occurrences of overlapping QTLs between characters were noted, indicating regions with potential pleiotropic effects. Moreover, some of the genes involved in the QTLs were also underlined by recent genome scans or expression profile studies.Overall, the proportion of phenotypic variance explained by each QTL ranged from 3.0 to 16.4% for bud flush, from 2.7 to 22.2% for bud set, and from 2.5 to 10.5% for height growth. Up to 70% of the total character variance could be accounted for by QTLs for bud flush or bud set, and up to 59% for height growth.

CONCLUSIONS

This study provides a basic understanding of the genomic architecture related to bud flush, bud set, and height growth in a conifer species, and a useful indicator to compare with Angiosperms. It will serve as a basic reference to functional and association genetic studies of adaptation and growth in Picea taxa. The putative QTNs identified will be tested for associations in natural populations, with potential applications in molecular breeding and gene conservation programs. QTLs mapping consistently across years and environments could also be the most important targets for breeding, because they represent genomic regions that may be least affected by G × E interactions.

Forest tree genomics: growing resources and applications

Over the past two decades, research in forest tree genomics has lagged behind that of model and agricultural systems. However, genomic research in forest trees is poised to enter into an important and productive phase owing to the advent of next-generation sequencing technologies, the enormous genetic diversity in forest trees and the need to mitigate the effects of climate change. Research on long-lived woody perennials is extending our molecular knowledge of complex life histories and adaptations to the environment - enriching a field that has traditionally drawn biological inference from a few short-lived herbaceous species.

Functional mapping of quantitative trait loci associated with rice tillering

Several biologically significant parameters that are related to rice tillering are closely associated with rice grain yield. Although identification of the genes that control rice tillering and therefore influence crop yield would be valuable for rice production management and genetic improvement, these genes remain largely unidentified. In this study, we carried out functional mapping of quantitative trait loci (QTLs) for rice tillering in 129 doubled haploid lines, which were derived from a cross between IR64 and Azucena. We measured the average number of tillers in each plot at seven developmental stages and fit the growth trajectory of rice tillering with the Wang-Lan-Ding mathematical model. Four biologically meaningful parameters in this model--the potential maximum for tiller number (K), the optimum tiller time (t(0)), and the increased rate (r), or the reduced rate (c) at the time of deviation from t(0)--were our defined variables for multi-marker joint analysis under the framework of penalized maximum likelihood, as well as composite interval mapping. We detected a total of 27 QTLs that accounted for 2.49-8.54% of the total phenotypic variance. Nine common QTLs across multi-marker joint analysis and composite interval mapping showed high stability, while one QTL was environment-specific and three were epistatic. We also identified several genomic segments that are associated with multiple traits. Our results describe the genetic basis of rice tiller development, enable further marker-assisted selection in rice cultivar development, and provide useful information for rice production management.

Unconditional and conditional QTL mapping for the developmental behavior of tiller number in rice (Oryza sativa L.)

A single segment substitution population of 26 lines and their recipient parent Hua-jing-xian 74 (HJX74) were selected as experimental materials for analyzing the developmental behavior of tiller number in rice. By the unconditional QTL (quantitative trait locus) mapping method, a total number of 14 SSSLs were detected with QTLs controlling rice tiller number. The number of QTLs significantly affecting tiller number and their effect values estimated differed across measuring stages. More QTLs could be detected based on time-dependent measures of different stages. By the conditional QTL mapping method, it is possible to reveal net expression of gene in a time interval. 14 QTLs on tiller number expressed their effects in dynamic patterns of themselves during whole ontogeny. They exhibited mainly negative effects within 7 days after transplanting. During 7-21 days, QTLs were in active status and expressed larger positive effects. In the mid-period of 21-35 days, they had opposite genetic effects to wither tillers. Since then these QTLs expressed positive effects again to cause the appearance of noneffective tillers. The dynamics of QTL effects was in agreement with the actual change of tillers. Mapping QTL combining unconditional with conditional analysis for time-dependent measures is helpful to understand roundly the genetic bases for the development of quantitative traits.

Five QTL hotspots for yield in short rotation coppice bioenergy poplar: the Poplar Biomass Loci

BACKGROUND

Concern over land use for non-food bioenergy crops requires breeding programmes that focus on producing biomass on the minimum amount of land that is economically-viable. To achieve this, the maximum potential yield per hectare is a key target for improvement. For long lived tree species, such as poplar, this requires an understanding of the traits that contribute to biomass production and their genetic control. An important aspect of this for long lived plants is an understanding of genetic interactions at different developmental stages, i.e. how genes or genetic regions impact on yield over time.

RESULTS

QTL mapping identified regions of genetic control for biomass yield. We mapped consistent QTL across multiple coppice cycles and identified five robust QTL hotspots on linkage groups III, IV, X, XIV and XIX, calling these 'Poplar Biomass Loci' (PBL 1-5). In total 20% of the variation in final harvest biomass yield was explained by mapped QTL. We also investigated the genetic correlations between yield related traits to identify 'early diagnostic' indicators of yield showing that early biomass was a reasonable predictor of coppice yield and that leaf size, cell number and stem and sylleptic branch number were also valuable traits.

CONCLUSION

These findings provide insight into the genetic control of biomass production and correlation to 'early diagnostic' traits determining yield in poplar SRC for bioenergy. QTL hotspots serve as useful targets for directed breeding for improved biomass productivity that may also be relevant across additional poplar hybrids.

Dynamic expression of nine QTLs for tiller number detected with single segment substitution lines in rice

Nine single segment substitution lines (SSSLs) in rice, which contain quantitative trait loci (QTLs) for tiller number on substituted segments detected in previous studies, were selected as materials to analyse dynamic expression of the QTLs in this study. These SSSLs and their recipient parent, Hua-jing-xian 74 (HJX74), were grown in four different environments and were measured for tiller number at nine different growth stages. An indirect methodology was applied in QTL mapping through analyzing multi-environment phenotypic data. Dynamics of three types of effects (including total effect, main effect, and QE interaction effect) of QTLs was released. It was shown that nine QTLs exhibited statistically significant effects only at certain stages. Effects of a QTL, although insignificant at certain stages, displayed dynamic change with the growth of rice plants. Two common features of nine QTLs were detected, one is no expression within 7 days after transplanting, and the other is opposite expression existed during the whole growth period. Nine QTLs largely focused on expression in certain stages, and accordingly were suggested to partition into three types, expression in prophase, both in prophase and in anaphase, and evenly during the whole stage. It may be reasonable explanation that dynamics of main effects of QTLs are likely due to gene expression selectly at certain times, while dynamics of QE interaction effects of QTLs might attribute to the subrogation of environmental factors. Examination of the association between QE interaction effect and specified environmental factors across stages may provide useful information on how an environmental factor regulates QTL expression.

Hebeloma cylindrosporum- a model species to study ectomycorrhizal symbiosis from gene to ecosystem

The basidiomycete Hebeloma cylindrosporum has been extensively studied with respect to mycorrhiza differentiation and metabolism and also to population dynamics. Its life cycle can be reproduced in vitro and it can be genetically transformed. Combined biochemical, cytological, genetical and molecular approaches led to the characterisation of mutant strains affected in mycorrhiza formation. These studies demonstrated the role of fungal auxin as a signal molecule in mycorrhiza formation and should allow the characterisation of essential fungal genes necessary to achieve a compatible symbiotic interaction. Random sequencing of cDNAs has identified numerous key functional genes which allowed dissection of essential nitrogen assimilation pathways. H. cylindrosporum also proved to be a remarkable model species to uncover the dynamics of natural populations of ectomycorrhizal fungi and the way in which they respond and adapt to anthropogenic disturbance of the forest ecosystem. Although studies on mycorrhiza differentiation and functioning and those on the population dynamics of H. cylindrosporum have been carried out independently, they are likely to converge in a renewed molecular ecophysiology which will envisage how ectomycorrhizal symbiosis functions under varying field conditions. Contents Summary 481 I. Introduction 482 II. Taxonomy, distribution, autecology, and host range of H. cylindrosporum 482 III. The Hebeloma cylindrosporum toolbox 483 IV. Mycorrhiza differentiation 486 V. Nutritional interactions 488 VI. Genetic diversity and dynamics of H. cylindrosporum populations in P. pinaster forest ecosystems 491 VII. Future directions 494 Acknowledgements 494 References 494.

Comparison of quantitative trait loci controlling seedling characteristics at two seedling stages using rice recombinant inbred lines

A better understanding of the genetics of seedling characteristics in rice could be helpful in improving rice varieties. Zhenshan 97 and Minghui 63, the parents of Shanyou 63, an elite hybrid developed during the last decade in China, vary greatly with respect to their physiological and morphological traits at the seedling growth stage. In this study, we used a population of 240 recombinant inbred lines derived from a cross between Zhenshan 97 and Minghui 63 to identify quantitative trait loci (QTL) for seedling characteristics. All plant material was grown in hydroponic culture. Data for the following characters were collected at 30 days and 40 days post-sowing: plant height, shoot dry matter weight (SDW), maximum root length, root dry weight (RDW), total dry weight, and root-shoot ratio (the ratio of SDW to RDW). Analysis using composite interval mapping detected 16 QTL for the six traits in 30-day-old seedlings. Of these 16 QTL, Minghui 63 alleles increased trait values at only two of them. The QTL in the vicinity of R3166 on chromosome 5 simultaneously influenced PH, SDW, MRL, RDW, and TDW in the same direction. Twenty QTL were detected for the same traits in the 40-day-old seedlings. However, at this stage Minghui 63 alleles increased trait values at eight QTL. The QTL linked to R3166 also affected PH, SDW, MRL, RDW, and TDW. Only four QTL were common to the two stages. These results clearly indicate that different genes (QTL) control the same traits during different time intervals. Zhenshan 97 alleles had positive effects during the first 30 days of seedling growth, but thereafter the positive effects of Minghui 63 alleles on seedling growth gradually became more pronounced.

Coordinated genetic regulation of growth and lignin revealed by quantitative trait locus analysis of cDNA microarray data in an interspecific backcross of eucalyptus

Phenotypic, genotypic, and transcript level (microarray) data from an interspecific backcross population of Eucalyptus grandis and Eucalyptus globulus were integrated to dissect the genetic and metabolic network underlying growth variation. Transcript abundance, measured for 2,608 genes in the differentiating xylem of a 91 (E. grandis x E. globulus) x E. grandis backcross progeny was correlated with diameter variation, revealing coordinated down-regulation of genes encoding enzymes of the lignin biosynthesis and associated methylation pathways in fast growing individuals. Lignin analysis of wood samples confirmed the content and quality predicted by the transcript levels measured on the microarrays. Quantitative trait locus (QTL) analysis of transcript levels of lignin-related genes showed that their mRNA abundance is regulated by two genetic loci, demonstrating coordinated genetic control over lignin biosynthesis. These two loci colocalize with QTLs for growth, suggesting that the same genomic regions are regulating growth, and lignin content and composition in the progeny. Genetic mapping of the lignin genes revealed that most of the key biosynthetic genes do not colocalize with growth and transcript level QTLs, with the exception of the locus encoding the enzyme S-adenosylmethionine synthase. This study illustrates the power of integrating quantitative analysis of gene expression data and genetic map information to discover genetic and metabolic networks regulating complex biological traits. (Sequence data for this article have been deposited with the EMBL/GenBank data libraries under accession numbers CB 967505 to CB 968059; CD 667988 to CD 670002; CD 670004; CD 670097; CD 670101 to CD 670112; and CD 670114 to CD 670137.)

A RAPD, AFLP and SSR linkage map, and QTL analysis in European beech (Fagus sylvatica L.)

The genetic linkage map of European beech ( Fagus sylvatica L.) that we report here is the first to our knowledge. Based on a total of 312 markers (28 RAPDs, 274 AFLPs, 10 SSRs) scored in 143 individuals from a F(1) full-sib family. Two maps (one for each parent) were constructed according to a "two-way pseudo-testcross" mapping strategy. In the male map 119 markers could be clustered in 11 major groups (971 cM), while in the female map 132 markers were distributed in 12 major linkage groups (844 cM). In addition, four and one minor linkage groups (doublets and triplets) were obtained for the male and female map respectively. The two maps cover about 82% and 78% of the genome. Based on the position of 15 AFLP and 2 SSR loci segregating in both parents, seven homologous linkage groups could be identified. In the same pedigree we investigated the association with genetic markers of several quantitative traits: leaf area, leaf number and shape in 2 different years, specific leaf area, leaf carbon-isotope discrimination and tree height. A composite interval-mapping approach was used to estimate the number of QTLs, the amount of variation explained by each of them, and their position on the genetic linkage maps. Eight QTLs associated with leaf traits were found that explained between 15% and 35% of the trait variation, five on the female map and three on the male map.

Evaluation of major genetic loci contributing to inbreeding depression for survival and early growth in a selfed family of Pinus taeda

The magnitude of fitness effects at genetic loci causing inbreeding depression at various life stages has been an important question in plant evolution. We used genetic mapping in a selfed family of loblolly pine (Pinus taeda L.) to gain insights on inbreeding depression for early growth and viability. Two quantitative trait loci (QTLs) were identified that explain much of the phenotypic variation in height growth through age 3 and may account for more than 13% inbreeding depression in this family. One of these QTLs maps to the location of cad-nl, a lignin biosynthesis mutation. Both QTLs show evidence of overdominance, although evidence for true versus pseudo-overdominance is inconclusive. Evidence of directional dominance for height growth was noted throughout the genome, suggesting that additional loci may contribute to inbreeding depression. A chlorophyll-deficiency mutation, spf did not appear to be associated with growth effects, but had significant effects on survival through age 3. Previously identified embryonic viability loci had little or no overall effect on germination, survival, or growth. Our results challenge, at least in part, the prevailing hypothesis that inbreeding depression for growth is due to alleles of small effect. However, our data support predictions that loci affecting inbreeding depression are largely stage specific.

Time-related mapping of quantitative trait loci underlying tiller number in rice

Using time-related phenotypic data, methods of composite interval mapping and multiple-trait composite interval mapping based on least squares were applied to map quantitative trait loci (QTL) underlying the development of tiller number in rice. A recombinant inbred population and a corresponding saturated molecular marker linkage map were constructed for the study. Tiller number was recorded every 4 or 5 days for a total of seven times starting at 20 days after sowing. Five QTL were detected on chromosomes 1, 3, and 5. These QTL explained more than half of the genetic variance at the final observation. All the QTL displayed an S-shaped expression curve. Three QTL reached their highest expression rates during active tillering stage, while the other two QTL achieved this either before or after the active tillering stage.