Genetic engineering of Schizosaccharomyces pombe: a system for gene disruption and replacement using the ura4 gene as a selectable marker

Creating Meiotic Recombination-Regulating DNA Sites by SpEDIT in Fission Yeast Reveals Inefficiencies, Target-Site Duplications, and Ectopic Insertions

Recombination hotspot-activating DNA sites (e.g., M26, CCAAT, Oligo-C) and their binding proteins (e.g., Atf1-Pcr1 heterodimer; Php2-Php3-Php5 complex, Rst2, Prdm9) regulate the distribution of Spo11 (Rec12)-initiated meiotic recombination. We sought to create 14 different candidate regulatory DNA sites via bp substitutions in the ade6 gene of Schizosaccharomyces pombe. We used a fission yeast-optimized CRISPR-Cas9 system (SpEDIT) and 196 bp-long dsDNA templates with centrally located bp substitutions designed to ablate the genomic PAM site, create specific 15 bp-long DNA sequences, and introduce a stop codon. After co-transformation with a plasmid that encoded both the guide RNA and Cas9 enzyme, about one-third of colonies had a phenotype diagnostic for DNA sequence changes at ade6. PCR diagnostics and DNA sequencing revealed a diverse collection of alterations at the target locus, including: (A) complete or (B) partial template-directed substitutions; (C) non-homologous end joinings; (D) duplications; (E) bp mutations, and (F) insertions of ectopic DNA. We concluded that SpEDIT can be used successfully to generate a diverse collection of DNA sequence elements within a reporter gene of interest. However, its utility is complicated by low efficiency, incomplete template-directed repair events, and undesired alterations to the target locus.

Distance-dependent effects on CRISPR/Cas9-mediated genome editing in Schizosaccharomyces pombe compromise efficiency and create unsought alleles

Discrete DNA sites position meiotic recombination at hotspots. We sought to create four different, 15 bp long, candidate regulatory DNA sites within the ura4 reporter gene. Each effort employed a fission yeast-optimized CRISPR system (SpEDIT), optimal guide RNA, and one of four homologous recombination templates with 10 to 15 bp substitutions. Remarkably, every Ura - transformant analyzed had template-directed, PAM-disabling bp substitutions near (5-6 bp away from) the DSB but no DNA site-generating substitutions at distance (42-56 bp). An unsought novel allele, ura4-P127* , has two substitutions (C379T, C380A) that create a stop codon, rendering strains unable to grow without uracil.

DNA sequences and distinct mechanisms for ura4-595 and ura4-294 alleles of S. pombe

The ura4 gene of the fission yeast Schizosaccharomyces pombe supports both positive and negative selection; consequently, this gene is widely employed as a powerful tool to study diverse biological processes. Here we report the DNA sequences of two functionally null alleles, ura4-595 and ura4-294 . The ura4-595 allele has a four bp duplication of bp +63 to +66 (5'-CAAG-3') within the ORF and the ura4-294 allele has a nonsynonymous substitution (G to A) at bp +679. We infer that these alleles arose, respectively, by DNA polymerase template slipping and by nucleotide misincorporation (likely via cytosine deamination).

A marker-free genome editing method in S. pombe using the delitto perfetto approach

The fission yeast, like budding yeast, offer an easy manipulation of their genome, despite their distinct biology. Most tools available in budding yeast are also available in fission yeast in versions taking into account the features of each organism. The delitto perfetto is a powerful approach, initially developed in S. cerevisiae , for in vivo site-directed mutagenesis. Here, we present an adaptation of the approach to S. pombe manipulation and demonstrate its applicability for a rapid, marker-free and efficient in vivo site-directed mutagenesis and N-terminal tagging of nonessential genes in fission yeast.

A set of vectors and strains for chromosomal integration in fission yeast

The expression of heterologous genes is an important technique in yeast genetics. In fission yeast, the leu1 and ura4 genes have been used mainly as selectable markers for heterologous expression. To expand the repertoire of selection markers available for heterologous expression of genes, here we developed new host-vector systems employing lys1 and arg3. By employing genome editing with the CRISPR/Cas9 system, we isolated several alleles of lys1 and arg3, each having a critical mutation in the ORF region. In parallel, we developed a set of vectors that complement the amino acid auxotrophy of lys1 and arg3 mutants when integrated into each locus. Using these vectors in combination with the previously developed integration vector pDUAL, we successfully observed the localization of three proteins in a cell simultaneously by fusing them with different fluorescent proteins. Thus, these vectors enable combinatorial expression of heterologous genes, which addresses increasingly diverse experimental challenges.

Improving Drug Sensitivity of HIV-1 Protease Inhibitors by Restriction of Cellular Efflux System in a Fission Yeast Model

Fission yeast can be used as a cell-based system for high-throughput drug screening. However, higher drug concentrations are often needed to achieve the same effect as in mammalian cells. Our goal here was to improve drug sensitivity so reduced drugs could be used. Three different methods affecting drug uptakes were tested using an FDA-approved HIV-1 protease inhibitor (PI) drug Darunavir (DRV). First, we tested whether spheroplasts without cell walls increase the drug sensitivity. Second, we examined whether electroporation could be used. Although small improvements were observed, neither of these two methods showed significant increase in the EC₅₀ values of DRV compared with the traditional method. In contrast, when DRV was tested in a mutant strain PR836 that lacks key proteins regulating cellular efflux, a significant increase in the EC₅₀ was observed. A comparison of nine FDA-approved HIV-1 PI drugs between the wild-type RE294 strain and the mutant PR836 strain showed marked enhancement of the drug sensitivities ranging from an increase of 0.56 log to 2.48 logs. Therefore, restricting cellular efflux through the adaption of the described fission yeast mutant strain enhances the drug sensitivity, reduces the amount of drug used, and increases the chance of success in future drug discovery.

The Quantitative Trait Loci Mapping of Rice Plant and the Components of Its Extract Confirmed the Anti-Inflammatory and Platelet Aggregation Effects In Vitro and In Vivo

Unpredictable climate change might cause serious lack of food in the world. Therefore, in the present world, it is urgent to prepare countermeasures to solve problems in terms of human survival. In this research, quantitative trait loci (QTLs) were analyzed when rice attacked by white backed planthopper (WBPH) were analyzed using 120 Cheongcheong/Nagdong double haploid lines. Moreover, from the detected QTLs, WBPH resistance-related genes were screened in large candidate genes. Among them, OsCM, a major gene in the synthesis of Cochlioquinone-9 (cq-9), was screened. OsCM has high homology with the sequence of chorismate mutase, and exists in various functional and structural forms in plants that produce aromatic amino acids. It also induces resistance to biotic stress through the synthesis of secondary metabolites in plants. The WBPH resistance was improved in rice overexpressed through map-based cloning of the WBPH resistance-related gene OsCM, which was finally detected by QTL mapping. In addition, cq-9 increased the survival rate of caecal ligation puncture (CLP)-surgery mice by 60%. Moreover, the aorta of rat treated with cq-9 was effective in vasodilation response and significantly reduced the aggregation of rat platelets induced by collagen treatment. A cq-9, which is strongly associated with resistance to WBPH in rice, is also associated with positive effect of CLP surgery mice survival rate, vasodilation, and significantly reduced rat platelet aggregation induced by collagen treatment. Therefore, cq-9 presents research possibilities as a substance in a new paradigm that can act on both Plant-Insect in response to the present unpredictable future.

Fission yeast Rad8/HLTF facilitates Rad52-dependent chromosomal rearrangements through PCNA lysine 107 ubiquitination

Gross chromosomal rearrangements (GCRs), including translocation, deletion, and inversion, can cause cell death and genetic diseases such as cancer in multicellular organisms. Rad51, a DNA strand exchange protein, suppresses GCRs by repairing spontaneous DNA damage through a conservative way of homologous recombination, gene conversion. On the other hand, Rad52 that catalyzes single-strand annealing (SSA) causes GCRs using homologous sequences. However, the detailed mechanism of Rad52-dependent GCRs remains unclear. Here, we provide genetic evidence that fission yeast Rad8/HLTF facilitates Rad52-dependent GCRs through the ubiquitination of lysine 107 (K107) of PCNA, a DNA sliding clamp. In rad51Δ cells, loss of Rad8 eliminated 75% of the isochromosomes resulting from centromere inverted repeat recombination, showing that Rad8 is essential for the formation of the majority of isochromosomes in rad51Δ cells. Rad8 HIRAN and RING finger mutations reduced GCRs, suggesting that Rad8 facilitates GCRs through 3’ DNA-end binding and ubiquitin ligase activity. Mms2 and Ubc4 but not Ubc13 ubiquitin-conjugating enzymes were required for GCRs. Consistent with this, mutating PCNA K107 rather than the well-studied PCNA K164 reduced GCRs. Rad8-dependent PCNA K107 ubiquitination facilitates Rad52-dependent GCRs, as PCNA K107R, rad8, and rad52 mutations epistatically reduced GCRs. In contrast to GCRs, PCNA K107R did not significantly change gene conversion rates, suggesting a specific role of PCNA K107 ubiquitination in GCRs. PCNA K107R enhanced temperature-sensitive growth defects of DNA ligase I cdc17-K42 mutant, implying that PCNA K107 ubiquitination occurs when Okazaki fragment maturation fails. Remarkably, K107 is located at the interface between PCNA subunits, and an interface mutation D150E bypassed the requirement of PCNA K107 and Rad8 ubiquitin ligase for GCRs. These data suggest that Rad8-dependent PCNA K107 ubiquitination facilitates Rad52-dependent GCRs by changing the PCNA clamp structure.

Gross chromosomal rearrangements (GCRs), including translocation, can alter gene dosage and activity, resulting in genetic diseases such as cancer. However, GCRs can occur by some enzymes, including Rad52 recombinase, and result in chromosomal evolution. Therefore, GCRs are not only pathological but also physiological phenomena from an evolutionary point of view. However, the detailed mechanism of GCRs remains unclear. Here, using fission yeast, we show that the homolog of human HLTF, Rad8 causes GCRs through noncanonical ubiquitination of proliferating cellular nuclear antigen (PCNA) at a lysine 107 (K107). Rad51, a DNA strand exchange protein, suppresses the formation of isochromosomes whose arms mirror each another and chromosomal truncation. We found that, like Rad52, Rad8 is required for isochromosome formation but not chromosomal truncation in rad51Δ cells, showing a specific role of Rad8 in homology-mediated GCRs. Mutations in Rad8 ubiquitin E3 ligase RING finger domain, Mms2-Ubc4 ubiquitin-conjugating enzymes, and PCNA K107 reduced GCRs in rad51Δ cells, suggesting that Rad8-Mms2-Ubc4-dependent PCNA K107 ubiquitination facilitates GCRs. PCNA trimers form a DNA sliding clamp. The K107 residue is located at the PCNA-PCNA interface, and an interface mutation D150E restored GCRs in PCNA K107R mutant cells. This study provides genetic evidence that Rad8-dependent PCNA K107 ubiquitination facilitates GCRs by changing the PCNA clamp structure.

Simplification of nutritional conditions in transformation procedures for genome editing with the CRISPR/Cas9 system for fission yeast

CRISPR/Cas9 is a powerful tool for genome editing. Several studies have been conducted to take the benefit of the versatile tool in the fission yeast Schizosaccharomyces pombe. However, the protocols for the CRISPR/Cas9 system proposed in previous studies are complicated in culture conditions compared to traditional genome editing methods. In this study, we introduced vectors for expression of sgRNA as well as Cas9, which employ natMX6 and bsdMX6 dominant selection markers. Using these materials, we examined nutritional conditions of cell cultures and found that nitrogen depletion introduced in previous methods does not affect the efficiency of genome editing. We found that bsdMX6-based plasmids enable us to skip any recovery steps before plating onto medium containing blasticidin S, unlike other antibiotic resistance selection markers. We thus propose easier transformation procedures with natMX6 and particularly bsdMX6 markers. We also simulate prescreening of mutants by genotyping with DNA endonucleases or proofreading PCR instead of relying on existing knowledge of mutant phenotypes. These materials and methods assist easy construction of S. pombe strains using CRISPR/Cas9, thereby accelerating seamless introduction of CRISPR/Cas9 to S. pombe researchers.

The fission yeast gmn2+ gene encodes an ERD1 homologue of Saccharomyces cerevisiae required for protein glycosylation and retention of luminal endoplasmic reticulum proteins

The gmn2 mutant of Schizosaccharomyces pombe has previously been shown to exhibit defects in protein glycosylation of N-linked oligosaccharides (Ballou, L. and Ballou, CE., Proc. Natl. Acad. Sci. USA, 92, 2790-2794 (1995)). Like most glycosylation-defective mutants, the S. pombe gmn2 mutant was found to be sensitive to hygromycin B, an aminoglycoside antibiotic. As a result of complementation analysis, the gmn2⁺ gene was found to be a single open reading frame that encodes a polypeptide of 373 amino acids consisting of multiple membrane-spanning regions. The Gmn2 protein shares sequence similarity with Kluyveromyces lactis and Saccharomyces cerevisiae Erd1 proteins, which are required for retention of luminal endoplasmic reticulum (ER) proteins. Although disruption of the gmn2⁺ gene is not lethal, the secreted glycoprotein showed a significant glycosylation defect with destabilization of the glycosyltransferase responsible for N-glycan elongation. It was also shown that a significant amount of BiP was missorted to the cell surface according to ADEL receptor destabilization. Fluorescent microscopy revealed that the functional Gmn2-EGFP fusion protein is mainly localized in the Golgi membrane. These results indicate that the Gmn2 protein is required for protein glycosylation and for retention of ER-resident proteins in S. pombe cells.

Reciprocal relation between reporter gene transcription and translation efficiency in fission yeast

The fission yeast, Schizosaccharomyces pombe, is an excellent model for basic research but is not useful for commercial scale protein expression due to lack of strong expression vectors. Earlier, we showed that the lsd90 promoter elicited significantly greater GFP expression level than the adh1 and nmt1 promoters, albeit in different vector backbones. Here, we have systematically investigated the contribution of selectable markers, LEU2 and URA3m to GFP expression: while LEU2 elicited very low expression, the URA3m gene, with truncated promoter, elicited much greater GFP expression level with all promoters. Paradoxically, an inverse correlation was observed between the GFP transcription and translation efficiency. This system can be useful for understanding the factors governing recombinant gene expression and optimization of protein production.

A toolbox of stable integration vectors in the fission yeast Schizosaccharomyces pombe

Schizosaccharomyces pombe is a widely used model organism to study many aspects of eukaryotic cell physiology. Its popularity as an experimental system partially stems from the ease of genetic manipulations, where the innate homology-targeted repair is exploited to precisely edit the genome. While vectors to incorporate exogenous sequences into the chromosomes are available, most are poorly characterized. Here, we show that commonly used fission yeast vectors, which upon integration produce repetitive genomic regions, give rise to unstable genomic loci. We overcome this problem by designing a new series of stable integration vectors (SIVs) that target four different prototrophy genes. SIVs produce non-repetitive, stable genomic loci and integrate predominantly as single copy. Additionally, we develop a set of complementary auxotrophic alleles that preclude false-positive integration events. We expand the vector series to include antibiotic resistance markers, promoters, fluorescent tags and terminators, and build a highly modular toolbox to introduce heterologous sequences. Finally, as proof of concept, we generate a large set of ready-to-use, fluorescent probes to mark organelles and cellular processes with a wide range of applications in fission yeast research.This article has an associated First Person interview with the first author of the paper.

Targeted Forward Genetics: Population-Scale Analyses of Allele Replacements Spanning Thousands of Base Pairs in Fission Yeast

Precise allele replacement (genome editing), without unwanted changes to the genome, provides a powerful tool to define the functions of DNA elements and encoded factors in their normal biological context. While CRISPR is now used extensively for gene targeting, its utility for precise allele replacement at population scale is limited because: (A) there is a strict requirement for a correctly positioned PAM motif to introduce recombinogenic dsDNA breaks (DSBs); (B) efficient replacements only occur very close to the DSBs; and (C) indels and off-target changes are frequently generated. Here we show, using a saturated mutation library with about 15,000 alleles of the ade6 gene of Schizosaccharomyces pombe, that pop-in, pop-out allele replacement circumvents these problems. Two rounds of selection ensure that clones arise by homologous recombination with the target locus. Moreover, the exceptionally high efficiency allows one to carry out the process in bulk, then screen individual clones for phenotypes and genotypes. Alleles were introduced successfully throughout the region targeted, up to 1,956 base pairs from the DSB. About 11% of mutant alleles were hypomorphic, demonstrating utility for analyses of essential genes and genetic elements. This process of “targeted forward genetics” can be used to analyze comprehensively, across thousands of base pairs within a specific target region, a variety of allelic changes, such as scanning amino acid substitutions, deletions, and epitope tags. The overall approach and optimized workflow are extensible to other organisms that support gene targeting.

Estimation of GFP-Nucleoporin Amount Based on Fluorescence Microscopy

Cellular structures and biomolecular complexes are not simply assemblies of proteins, but are organized with defined numbers of protein molecules in precise locations. Thus, evaluating the spatial localization and numbers of protein molecules is of fundamental importance in understanding cellular structures and functions. The amounts of proteins of interest have conventionally been determined by biochemical methods. However, biochemical measurements based on the population average have limitations: it is sometimes difficult to determine the amounts of insoluble proteins or low expression proteins localized in small portions of the cell. In contrast, microphotometric measurements using fluorescence microscopes enable us to detect the amounts of such proteins in situ in a particular subcellular region. Here, we describe a method to measure the amounts of fluorescently tagged proteins by fluorescence microscopy, and present an example of an application to nuclear pore proteins in the fission yeast Schizosaccharomyces pombe.

Phosphorylation of Arp2 is not essential for Arp2/3 complex activity in fission yeast

LeClaire et al presented evidence that phosphorylation of three sites on the Arp2 subunit activates the Arp2/3 complex to nucleate actin filaments. We mutated the homologous residues of Arp2 (Y198, T233, and T234) in the fission yeast genome to amino acids that preclude or mimic phosphorylation. Arp2/3 complex is essential for the viability of fission yeast, yet strains unable to phosphorylate these sites grew normally. Y198F/T233A/T234A Arp2 was only nonfunctional if GFP-tagged, as observed by LeClaire et al in Drosophila cells. Replacing both T233 and T234 with aspartic acid was lethal, suggesting that phosphorylation might be inhibitory. Nevertheless, blocking phosphorylation at these sites had the same effect as mimicking it: slowing assembly of endocytic actin patches. Mass spectrometry revealed phosphorylation at a fourth conserved Arp2 residue, Y218, but both blocking and mimicking phosphorylation of Y218 only slowed actin patch assembly slightly. Therefore, phosphorylation of Y198, T233, T234, and Y218 is not required for the activity of fission yeast Arp2/3 complex.

LAMMER Kinase Lkh1 Is an Upstream Regulator of Prk1-Mediated Non-Sexual Flocculation in Fission Yeast

The cation-dependent galactose-specific flocculation activity of the Schizosaccharomyces pombe null mutant of lkh1 ⁺, the gene encoding LAMMER kinase homolog, has previously been reported by our group. Here, we show that disruption of prk1 ⁺, another flocculation associated regulatory kinase encoding gene, also resulted in cation-dependent galactose-specific flocculation. Deletion of prk1 increased the flocculation phenotype of the lkh1 ⁺ null mutant and its overexpression reversed the flocculation of cells caused by lkh1 deletion. Transcript levels of prk1 ⁺ were also decreased by lkh1 ⁺ deletion. Cumulatively, these results indicate that Lkh1 is one of the negative regulators acting upstream of Prk1, regulating non-sexual flocculation in fission yeast.

A Heterochromatin Domain Forms Gradually at a New Telomere and Is Dynamic at Stable Telomeres

Heterochromatin domains play important roles in chromosome biology, organismal development, and aging, including centromere function, mammalian female X chromosome inactivation, and senescence-associated heterochromatin foci. In the fission yeast Schizosaccharomyces pombe and metazoans, heterochromatin contains histone H3 that is dimethylated at lysine 9.

Heterochromatin domains play important roles in chromosome biology, organismal development, and aging, including centromere function, mammalian female X chromosome inactivation, and senescence-associated heterochromatin foci. In the fission yeast Schizosaccharomyces pombe and metazoans, heterochromatin contains histone H3 that is dimethylated at lysine 9. While factors required for heterochromatin have been identified, the dynamics of heterochromatin formation are poorly understood. Telomeres convert adjacent chromatin into heterochromatin. To form a new heterochromatic region in S. pombe, an inducible DNA double-strand break (DSB) was engineered next to 48 bp of telomere repeats in euchromatin, which caused formation of a new telomere and the establishment and gradual spreading of a new heterochromatin domain. However, spreading was dynamic even after the telomere had reached its stable length, with reporter genes within the heterochromatin domain showing variegated expression. The system also revealed the presence of repeats located near the boundaries of euchromatin and heterochromatin that are oriented to allow the efficient healing of a euchromatic DSB to cap the chromosome end with a new telomere. Telomere formation in S. pombe therefore reveals novel aspects of heterochromatin dynamics and fail-safe mechanisms to repair subtelomeric breaks, with implications for similar processes in metazoan genomes.

A Cloning-Free Method for CRISPR/Cas9-Mediated Genome Editing in Fission Yeast

The CRISPR/Cas9 system, which relies on RNA‐guided DNA cleavage to induce site-specific DNA double-strand breaks, is a powerful tool for genome editing. This system has been successfully adapted for the fission yeast Schizosaccharomyces pombe by expressing Cas9 and the single-guide RNA (sgRNA) from a plasmid. In the procedures published to date, the cloning step that introduces a specific sgRNA target sequence into the plasmid is the most tedious and time-consuming. To increase the efficiency of applying the CRISPR/Cas9 system in fission yeast, we here developed a cloning-free procedure that uses gap repair in fission yeast cells to assemble two linear DNA fragments, a gapped Cas9-encoding plasmid and a PCR-amplified sgRNA insert, into a circular plasmid. Both fragments contain only a portion of the ura4 or bsdMX marker so that only the correctly assembled plasmid can confer uracil prototrophy or blasticidin resistance. We show that this gap-repair-based and cloning-free CRISPR/Cas9 procedure permits rapid and efficient point mutation knock-in, endogenous N-terminal tagging, and genomic sequence deletion in fission yeast.

Genetic interactions between the chromosome axis-associated protein Hop1 and homologous recombination determinants in Schizosaccharomyces pombe

Hop1 is a component of the meiosis-specific chromosome axis and belongs to the evolutionarily conserved family of HORMA domain proteins. Hop1 and its orthologs in higher eukaryotes are a major factor in promoting double-strand DNA break formation and inter-homolog recombination. In budding yeast and mammals, they are also involved in a meiotic checkpoint kinase cascade monitoring the completion of double-strand DNA break repair. We used the fission yeast, Schizosaccharomyces pombe, which lacks a canonical synaptonemal complex to test whether Hop1 has a role beyond supporting the generation of double-strand DNA breaks and facilitating inter-homolog recombination events. We determined how mutants of homologous recombination factors genetically interact with hop1, studied the role(s) of the HORMA domain of Hop1, and characterized a bio-informatically predicted interactor of Hop1, Aho1 (SPAC688.03c). Our observations indicate that in fission yeast, Hop1 does require its HORMA domain to support wild-type levels of meiotic recombination and localization to meiotic chromatin. Furthermore, we show that hop1∆ only weakly interacts genetically with mutants of homologous recombination factors, and in fission yeast likely has no major role beyond break formation and promoting inter-homolog events. We speculate that after the evolutionary loss of the synaptonemal complex, Hop1 likely has become less important for modulating recombination outcome during meiosis in fission yeast, and that this led to a concurrent rewiring of genetic pathways controlling meiotic recombination.

Construction of Designer Selectable Marker Deletions with a CRISPR-Cas9 Toolbox in Schizosaccharomyces pombe and New Design of Common Entry Vectors

Vectors encoding selectable markers have been widely used in yeast to maintain or express exogenous DNA fragments. In the fission yeast Schizosaccharomyces pombe, several engineered markers have been reported and widely used, such as ura4⁺ and ScLEU2 from Saccharomyces cerevisiae, which complement ura4 and leu1 mutations, respectively. These two auxotrophic markers share no homology with the S. pombe genome; however, most others can recombine with the genome due to sequence homology shared between the genomic and plasmid-borne copies of the markers. Here, we describe a CRISPR-Cas9 toolbox that can be used to quickly introduce "designer" auxotrophic marker deletions into host strains, including leu1-Δ0, his3-Δ0, and lys9-Δ0 Together with ura4-D18, this brings the total number of available designer deletion auxotrophic markers to four. The toolbox consists of a Cas9-gRNA expression vector and a donor DNA plasmid pair for each designer deletion. Using this toolbox, a set of auxotrophic S. pombe strains was constructed. Further, we reorganized essential components in the commonly used pREP series of plasmids and assembled the corresponding auxotrophic marker gene onto these plasmids. This toolbox for producing designer deletions, together with the newly developed strains and plasmids, will benefit the whole yeast community.

Module-based systematic construction of plasmids for episomal gene expression in fission yeast

The fission yeast Schizosaccharomyces pombe is a powerful model organism for cell biology and molecular biology, as genetic manipulation is easily achieved. Introduction of exogenous genes cloned in episomal plasmids into yeast cells can be done through well-established transformation methods. For expression of genes in S. pombe cells, the multi-copy plasmid pREP1 and its derivatives, including pREP41 and pREP81, have been widely used as vectors. Although recent advancement of technology brought a number of useful genetic elements such as new promoters, selection marker genes and fluorescent protein tags, introduction of those elements into conventional pREP1 requires a large commitment of both time and effort because cloning procedures need to be repeated until the final products are constructed. Here, we introduce materials and methods to construct many pREP1-type plasmids easily and systematically using the Golden Gate shuffling method, which enables one-step ligation of many DNA fragments into a plasmid. These materials and methods support creation of expression plasmids employing a variety of novel genetic elements, which will further facilitate genetic studies using S. pombe.

Quiescence unveils a novel mutational force in fission yeast

To maintain life across a fluctuating environment, cells alternate between phases of cell division and quiescence. During cell division, the spontaneous mutation rate is expressed as the probability of mutations per generation (Luria and Delbrück, 1943; Lea and Coulson, 1949), whereas during quiescence it will be expressed per unit of time. In this study, we report that during quiescence, the unicellular haploid fission yeast accumulates mutations as a linear function of time. The novel mutational landscape of quiescence is characterized by insertion/deletion (indels) accumulating as fast as single nucleotide variants (SNVs), and elevated amounts of deletions. When we extended the study to 3 months of quiescence, we confirmed the replication-independent mutational spectrum at the whole-genome level of a clonally aged population and uncovered phenotypic variations that subject the cells to natural selection. Thus, our results support the idea that genomes continuously evolve under two alternating phases that will impact on their size and composition.

DNA repair and mutations during quiescence in yeast

Life is maintained through alternating phases of cell division and quiescence. The causes and consequences of spontaneous mutations have been extensively explored in proliferating cells, and the major sources include errors of DNA replication and DNA repair. The foremost consequences are genetic variations within a cell population that can lead to heritable diseases and drive evolution. While most of our knowledge on DNA damage response and repair has been gained through cells actively dividing, it remains essential to also understand how DNA damage is metabolized in cells which are not dividing. In this review, we summarize the current knowledge concerning the type of lesions that arise in non-dividing budding and fission yeast cells, as well as the pathways used to repair them. We discuss the contribution of these models to our current understanding of age-related pathologies.

Genetic Analysis of Schizosaccharomyces pombe

In this introduction we discuss some basic genetic tools and techniques that are used with the fission yeast Schizosaccharomyces pombe Genes commonly used for selection or as reporters are discussed, with an emphasis on genes that permit counterselection, intragenic complementation, or colony-color assays. S. pombe is most stable as a haploid organism. We describe its mating-type system, how to perform genetic crosses and methods for selecting and propagating diploids. We discuss the relative merits of tetrad dissection and random spore preparation in strain construction and genetic analyses. Finally, we present several types of mutant screens, with an evaluation of their respective strengths and limitations in the light of emerging technologies such as next-generation sequencing.

Sequential and counter-selectable cassettes for fission yeast

Background

Fission yeast is one of the most commonly used model organisms for studying genetics. For selection of desirable genotypes, antibiotic resistance cassettes are widely integrated into the genome near genes of interest. In yeasts, this is achieved by PCR amplification of the cassette flanked by short homology sequences, which can be incorporated by homology directed repair. However, the currently available cassettes all share the same tef promoter and terminator sequences. It can therefore be challenging to perform multiple genetic modifications by PCR-based targeting, as existing resistance cassettes in strains can be favored for recombination due to shared homology between the cassettes.

Results

Here we have generated new selection cassettes that do not recombine with those traditionally used. We achieved this by swapping the tef promoter and terminator sequences in the established antibiotic resistance MX6 cassette series for alternative promoters and/or terminators. The newly created selection cassettes did not recombine with the tef-containing MX6 cassettes already present in the genome, allowing for sequential gene targeting using the PCR-based method. In addition, we have generated a series of plasmids to facilitate the C-terminal tagging of genes with desired epitopes. We also utilized the anti-selection gene HSV-TK, which results in cell death in strains grown on the drug 5-Fluoro-2’-deoxyuridine (FdU, Floxuridin or FUDR). By fusing an antibiotic resistance gene to HSV-TK, we were able to select on the relevant antibiotic as well as counter-select on FdU media to confirm the desired genomic modification had been made. We noted that the efficiency of the counter selection by FdU was enhanced by treatment with hydroxyurea. However, a number of DNA replication checkpoint and homologous recombination mutants, including rad3∆, cds1∆, rad54∆ and rad55∆, exhibited sensitivity to FdU even though those strains did not carry the HSV-TK gene. To remove counter-selectable markers, we introduced the Cre-loxP irreversible recombination method. Finally, utilizing the negative selectable markers, we showed efficient induction of point mutations in an endogenous gene by a two-step transformation method.

Conclusions

The plasmid constructs and techniques described here are invaluable tools for sequential gene targeting and will simplify construction of fission yeast strains required for study.

Analysis of Heterochromatin in Schizosaccharomyces pombe

This introduction briefly describes the biology of heterochromatin in the fission yeast Schizosaccharomyces pombe We highlight some of the salient features of fission yeast that render it an excellent unicellular eukaryote for studying heterochromatin. We then discuss key aspects of heterochromatin that are of interest to those in the field, and last we introduce experimental approaches often used to investigate heterochromatin.

Use of a fluoride channel as a new selection marker for fission yeast plasmids and application to fast genome editing with CRISPR/Cas9

Fission yeast is a powerful model organism that has provided insights into important cellular processes thanks to the ease of its genome editing by homologous recombination. However, creation of strains with a large number of targeted mutations or containing plasmids has been challenging because only a very small number of selection markers is available in Schizosaccharomyces pombe. In this paper, we identify two fission yeast fluoride exporter channels (Fex1p and Fex2p) and describe the development of a new strategy using Fex1p as a selection marker for transformants in rich media supplemented with fluoride. To our knowledge this is the first positive selection marker identified in S. pombe that does not use auxotrophy or drug resistance and that can be used for plasmids transformation or genomic integration in rich media. We illustrate the application of our new marker by significantly accelerating the protocol for genome edition using CRISPR/Cas9 in S. pombe. Copyright © 2016 John Wiley & Sons, Ltd.

Molecular Genetic Tools and Techniques in Fission Yeast

The molecular genetic tools used in fission yeast have generally been adapted from methods and approaches developed for use in the budding yeast, Saccharomyces cerevisiae Initially, the molecular genetics of Schizosaccharomyces pombe was developed to aid gene identification, but it is now applied extensively to the analysis of gene function and the manipulation of noncoding sequences that affect chromosome dynamics. Much current research using fission yeast thus relies on the basic processes of introducing DNA into the organism and the extraction of DNA for subsequent analysis. Targeted integration into specific genomic loci is often used to create site-specific mutants or changes to noncoding regulatory elements for subsequent phenotypic analysis. It is also regularly used to introduce additional sequences that generate tagged proteins or to create strains in which the levels of wild-type protein can be manipulated through transcriptional regulation and/or protein degradation. Here, we draw together a collection of core molecular genetic techniques that underpin much of modern research using S. pombe We summarize the most useful methods that are routinely used and provide guidance, learned from experience, for the successful application of these methods.

Regulation of the antioxidant system in cells of the fission yeast Schizosaccharomyces pombe after combined treatment with patulin and citrinin

The effects of combined treatment with patulin (PAT) and citrinin (CTN) on Schizosaccharomyces pombe cells were investigated in acute toxicity tests. In comparison with the controls the exposure of fission yeast cells (10(7) cells ml(-1)) to PAT + CTN (250 μM each) for 1 h at a survival rate of 66.6% significantly elevated the concentration of total reactive oxygen species (ROS) via increased levels of peroxides without affecting the concentrations of superoxides or the hydroxyl radical. This treatment induced a 3.08-fold increase in the specific concentration of glutathione and elevated specific activities of catalase and glutathione S-transferase, while at the same time the activity of glutathione reductase decreased. The pattern of the ROS was the same as that induced by CTN (Máté et al., 2014), while the presence of PAT in the PAT + CTN combination treatment modified the activities of the antioxidant system (Papp et al., 2012) in comparison with the individual PAT or CTN treatment, suggesting toxin-specific regulation of glutathione and the enzymes of the antioxidant system and the possibility that the transcription factor (pap1 and atf1) -regulated processes might be influenced directly by ROS.

Single-step Marker Switching in Schizosaccharomyces pombe Using a Lithium Acetate Transformation Protocol

The ability to utilize different selectable markers for tagging or mutating multiple genes in Schizosaccharomyces pombe is hampered by the historical use of only two selectable markers, ura4⁺ and kanMX6; the latter conferring resistance to the antibiotic G418 (geneticin). More markers have been described recently, but introducing these into yeast cells often requires strain construction from scratch. To overcome this problem we and other groups have created transformation cassettes with flanking homologies to ura4⁺ and kanMX6 which enable an efficient and time-saving way to exchange markers in existing mutated or tagged fission yeast strains. Here, we present a protocol for single-step marker switching by lithium acetate transformation in fission yeast, Schizosaccharomyces pombe. In the following we describe how to swap the ura4⁺ marker to a kanMX6, natMX4, or hphMX4 marker, which provide resistance against the antibiotics G418, nourseothricin (clonNAT) or hygromycin B, respectively. We also detail how to exchange any of the MX markers for nutritional markers, such as arg3⁺, his3⁺, leu1⁺ and ura4⁺ .

A Tool for Multiple Targeted Genome Deletions that Is Precise, Scar-Free, and Suitable for Automation

Many advances in synthetic biology require the removal of a large number of genomic elements from a genome. Most existing deletion methods leave behind markers, and as there are a limited number of markers, such methods can only be applied a fixed number of times. Deletion methods that recycle markers generally are either imprecise (remove untargeted sequences), or leave scar sequences which can cause genome instability and rearrangements. No existing marker recycling method is automation-friendly. We have developed a novel openly available deletion tool that consists of: 1) a method for deleting genomic elements that can be repeatedly used without limit, is precise, scar-free, and suitable for automation; and 2) software to design the method’s primers. Our tool is sequence agnostic and could be used to delete large numbers of coding sequences, promoter regions, transcription factor binding sites, terminators, etc in a single genome. We have validated our tool on the deletion of non-essential open reading frames (ORFs) from S. cerevisiae. The tool is applicable to arbitrary genomes, and we provide primer sequences for the deletion of: 90% of the ORFs from the S. cerevisiae genome, 88% of the ORFs from S. pombe genome, and 85% of the ORFs from the L. lactis genome.

The Paf1 complex factors Leo1 and Paf1 promote local histone turnover to modulate chromatin states in fission yeast

The maintenance of open and repressed chromatin states is crucial for the regulation of gene expression. To study the genes involved in maintaining chromatin states, we generated a random mutant library in Schizosaccharomyces pombe and monitored the silencing of reporter genes inserted into the euchromatic region adjacent to the heterochromatic mating type locus. We show that Leo1–Paf1 [a subcomplex of the RNA polymerase II‐associated factor 1 complex (Paf1C)] is required to prevent the spreading of heterochromatin into euchromatin by mapping the heterochromatin mark H3K9me2 using high‐resolution genomewide ChIP (ChIP–exo). Loss of Leo1–Paf1 increases heterochromatin stability at several facultative heterochromatin loci in an RNAi‐independent manner. Instead, deletion of Leo1 decreases nucleosome turnover, leading to heterochromatin stabilization. Our data reveal that Leo1–Paf1 promotes chromatin state fluctuations by enhancing histone turnover.

New cassettes for single-step drug resistance and prototrophic marker switching in fission yeast

Construction of multiply mutated strains for genetic interaction analysis and of strains carrying different epitope tags at multiple open reading frames for testing protein localization, abundance and protein-protein interactions is hampered by the availability of a sufficient number of different selectable markers. Moreover, strains with single gene deletions or tags often already exist in strain collections; for historical reasons these will mostly carry the ura4(+) gene or the G418-resistance kanMX as marker. Because it is rather cumbersome to produce multiply deleted or tagged strains using the same marker, or to completely reconstruct a particular strain with a different marker, single-step exchange protocols of markers are a time-saving alternative. In recent years, dominant drug resistance markers (DDRMs) against clonNAT, hygromycin B and bleomycin have been adapted and successfully used in Schizosaccharomyces pombe. The corresponding DDRM cassettes, natMX, hphMX and bleMX, carry the TEF promotor and terminator sequences from Ashbya gossypii as kanMX; this provides flanking homologies to enable single-step marker swapping by homologous gene targeting. To expand this very useful toolset for single-step marker exchange, I constructed MX cassettes containing the nutritional markers arg3(+), his3(+), leu1(+) and ura4(+). Furthermore, a set of constructs was created to enable single-step exchange of ura4(+) to kanMX6, natMX4 and hphMX4. The functionality of the cassettes is demonstrated by successful single-step marker swapping at several loci. These constructs allow straightforward and rapid remarking of existing ura4(+) - and MX-deleted and -tagged strains.

Telomeres and centromeres have interchangeable roles in promoting meiotic spindle formation

Both centromere–centrosome and telomere–centrosome contacts can promote spindle formation during meiosis.

Telomeres and centromeres have traditionally been considered to perform distinct roles. During meiotic prophase, in a conserved chromosomal configuration called the bouquet, telomeres gather to the nuclear membrane (NM), often near centrosomes. We found previously that upon disruption of the fission yeast bouquet, centrosomes failed to insert into the NM at meiosis I and nucleate bipolar spindles. Hence, the trans-NM association of telomeres with centrosomes during prophase is crucial for efficient spindle formation. Nonetheless, in approximately half of bouquet-deficient meiocytes, spindles form properly. Here, we show that bouquet-deficient cells can successfully undergo meiosis using centromere–centrosome contact instead of telomere–centrosome contact to generate spindle formation. Accordingly, forced association between centromeres and centrosomes fully rescued the spindle defects incurred by bouquet disruption. Telomeres and centromeres both stimulate focal accumulation of the SUN domain protein Sad1 beneath the centrosome, suggesting a molecular underpinning for their shared spindle-generating ability. Our observations demonstrate an unanticipated level of interchangeability between the two most prominent chromosomal landmarks.

The telomere bouquet regulates meiotic centromere assembly

The role of the conserved meiotic telomere bouquet has been enigmatic for over a century. We showed previously that disruption of the fission yeast bouquet impairs spindle formation in approximately half of meiotic cells. Surprisingly, bouquet-deficient meiocytes with functional spindles harbour chromosomes that fail to achieve spindle attachment. Kinetochore proteins and the centromeric histone H3 variant Cnp1 fail to localize to those centromeres that exhibit spindle attachment defects in the bouquet's absence. The HP1 orthologue Swi6 also fails to bind these centromeres, suggesting that compromised pericentromeric heterochromatin underlies the kinetochore defects. We find that centromeres are prone to disassembly during meiosis, but this is reversed by localization of centromeres to the telomere-proximal microenvironment, which is conducive to heterochromatin formation and centromere reassembly. Accordingly, artificially tethering a centromere to a telomere rescues the tethered centromere but not other centromeres. These results reveal an unanticipated level of control of centromeres by telomeres.

RNA cytidine acetyltransferase of small-subunit ribosomal RNA: identification of acetylation sites and the responsible acetyltransferase in fission yeast, Schizosaccharomyces pombe

The eukaryotic small-subunit (SSU) ribosomal RNA (rRNA) has two evolutionarily conserved acetylcytidines. However, the acetylation sites and the acetyltransferase responsible for the acetylation have not been identified. We performed a comprehensive MS-based analysis covering the entire sequence of the fission yeast, Schizosaccharomyces pombe, SSU rRNA and identified two acetylcytidines at positions 1297 and 1815 in the 3′ half of the rRNA. To identify the enzyme responsible for the cytidine acetylation, we searched for an S. pombe gene homologous to TmcA, a bacterial tRNA N-acetyltransferase, and found one potential candidate, Nat10. A temperature-sensitive strain of Nat10 with a mutation in the Walker A type ATP-binding motif abolished the cytidine acetylation in SSU rRNA, and the wild-type Nat10 supplemented to this strain recovered the acetylation, providing evidence that Nat10 is necessary for acetylation of SSU rRNA. The Nat10 mutant strain showed a slow-growth phenotype and was defective in forming the SSU rRNA from the precursor RNA, suggesting that cytidine acetylation is necessary for ribosome assembly.

Extending the Schizosaccharomyces pombe molecular genetic toolbox

Targeted alteration of the genome lies at the heart of the exploitation of S. pombe as a model system. The rate of analysis is often determined by the efficiency with which a target locus can be manipulated. For most loci this is not a problem, however for some loci, such as fin1+, rates of gene targeting below 5% can limit the scope and scale of manipulations that are feasible within a reasonable time frame. We now describe a simple modification of transformation procedure for directing integration of genomic sequences that leads to a 5-fold increase in the transformation efficiency when antibiotic based dominant selection markers are used. We also show that removal of the pku70+ and pku80+ genes, which encode DNA end binding proteins required for the non-homologous end joining DNA repair pathway, increases the efficiency of gene targeting at fin1+ to around 75-80% (a 16-fold increase). We describe how a natMX6/rpl42+ cassette can be used for positive and negative selection for integration at a targeted locus. To facilitate the evaluation of the impact of a series of mutations on the function of a gene of interest we have generated three vector series that rely upon different selectable markers to direct the expression of tagged/untagged molecules from distinct genomic integration sites. pINTL and pINTK vectors use ura4+ selection to direct disruptive integration of leu1+ and lys1+ respectively, while pINTH vectors exploit nourseothricin resistance to detect the targeted disruption of a hygromycin B resistance conferring hphMX6 cassette that has been integrated on chromosome III. Finally, we have generated a series of multi-copy expression vectors that use resistance to nourseothricin or kanamycin/G418 to select for propagation in prototrophic hosts. Collectively these protocol modifications and vectors extend the versatility of this key model system.

Rapid, efficient and precise allele replacement in the fission yeast Schizosaccharomyces pombe

Gene targeting provides a powerful tool to modify endogenous loci to contain specific mutations, insertions and deletions. Precise allele replacement, with no other chromosomal changes (e.g., insertion of selectable markers or heterologous promoters), maintains physiologically relevant context. Established methods for precise allele replacement in fission yeast employ two successive rounds of transformation and homologous recombination and require genotyping at each step. The relative efficiency of homologous recombination is low and a high rate of false positives during the second round of gene targeting further complicates matters. We report that pop-in, pop-out allele replacement circumvents these problems. We present data for 39 different allele replacements, involving simple and complex modifications at seven different target loci, that illustrate the power and utility of the approach. We also developed and validated a rapid, efficient process for precise allele replacement that requires only one round each of transformation and genotyping. We show that this process can be applied in population scale to an individual target locus, without genotyping, to identify clones with an altered phenotype (targeted forward genetics). It is therefore suitable for saturating, in situ, locus-specific mutation screens (e.g., of essential or non-essential genes and regulatory DNA elements) within normal chromosomal context.

Interactions between peptidyl tRNA hydrolase homologs and the ribosomal release factor Mrf1 in S. pombe mitochondria

Mitochondrial translation synthesizes key subunits of the respiratory complexes. In Schizosaccharomyces pombe, strains lacking Mrf1, the mitochondrial stop codon recognition factor, are viable, suggesting that other factors can play a role in translation termination. S. pombe contains four predicted peptidyl tRNA hydrolases, two of which (Pth3 and Pth4), have a GGQ motif that is conserved in class I release factors. We show that high dosage of Pth4 can compensate for the absence of Mrf1 and loss of Pth4 exacerbates the lack of Mrf1. Also Pth4 is a component of the mitochondrial ribosome, suggesting that it could help recycling stalled ribosomes.

•

In S. pombe the peptidyl tRNA hydrolases Pth3 and Pth4 are mitochondrial proteins.

•

Pth3 and Pth4 are associated with the mitochondrial ribosome and the large subunit.

•

Deletion of pth4 and mrf1, encoding the mitochondrial release factor, is co-lethal.

•

Over-expression of pth4 compensates for the deletion of mrf1.

•

Pth4 can act as a release factor in S. pombe mitochondria.

Identification of two telomere-proximal fission yeast DNA replication origins constrained by nearby cis-acting sequences to replicate in late S phase

Telomeres of the fission yeast,  Schizosaccharomyces pombe, are known to replicate in late S phase, but the reasons for this late replication are not fully understood. We have identified two closely-spaced DNA replication origins, 5.5 to 8 kb upstream from the telomere itself. These are the most telomere-proximal of all the replication origins in the fission yeast genome. When located by themselves in circular plasmids, these origins fired in early S phase, but if flanking sequences closer to the telomere were included in the circular plasmid, then replication was restrained to late S phase - except in cells lacking the replication-checkpoint kinase, Cds1. We conclude that checkpoint-dependent late replication of telomere-associated sequences is dependent on nearby cis-acting sequences, not on proximity to the physical end of a linear chromosome.

Identification of novel α1,3-galactosyltransferase and elimination of α-galactose-containing glycans by disruption of multiple α-galactosyltransferase genes in Schizosaccharomyces pombe

The oligosaccharides from fission yeast Schizosaccharomyces pombe contain large amounts of D-galactose (Gal) in addition to D-mannose (Man), in contrast to the budding yeast Saccharomyces cerevisiae. Detailed structural analysis has revealed that the Gal residues are attached to the N- and O-linked oligosaccharides via α1,2- or α1,3-linkages. Previously we constructed and characterized a septuple α-galactosyltransferase disruptant (7GalTΔ) anticipating a complete lack of α-Gal residues. However, the 7GalTΔ strain still contained oligosaccharides consisting of α1,3-linked Gal residues, indicating the presence of at least one more additional unidentified α1,3-galactosyltransferase. In this study we searched for unidentified putative glycosyltransferases in the S. pombe genome sequence and identified three novel genes, named otg1(+)-otg3(+) (α one, three-galactosyltransferase), that belong to glycosyltransferase gene family 8 in the Carbohydrate Active EnZymes (CAZY) database. Gal-recognizing lectin blotting and HPLC analyses of pyridylaminated oligosaccharides after deletion of these three additional genes from 7GalTΔ strain demonstrated that the resultant disruptant missing 10 α-galactosyltransferase genes, 10GalTΔ, exhibited a complete loss of galactosylation. In an in vitro galactosylation assay, the otg2(+) gene product had Gal transfer activity toward a pyridylaminated Man(9)GlcNAc(2) oligosaccharide and pyridylaminated Manα1,2-Manα1,2-Man oligosaccharide. In addition, the otg3(+) gene product exhibited Gal transfer activity toward the pyridylaminated Man(9)GlcNAc(2) oligosaccharide. Generation of an α1,3-linkage was confirmed by HPLC analysis, α-galactosidase digestion analysis, (1)H NMR spectroscopy, and LC-MS/MS analysis. These results indicate that Otg2p and Otg3p are involved in α1,3-galactosylation of S. pombe oligosaccharides.

A new versatile system for rapid control of gene expression in the fission yeast Schizosaccharomyces pombe

The ability to regulate the expression of a gene greatly aids the process of uncovering its functions. The fission yeast Schizosaccharomyces pombe has so far lacked a system for rapidly controlling the expression of chromosomal genes, hindering its full potential as a model organism. Although the widely used nmt1 promoter displays a wide dynamic range of activity, it takes > 14-15 h to derepress. The urg1 promoter also shows a large dynamic range and can be induced quickly (< 2 h), but its implementation requires laborious strain construction and it cannot be used to study meiosis. To overcome these limitations, we constructed a tetracycline-regulated system for inducible expression of chromosomal genes in fission yeast, which is easily established and implemented. In this system the promoter of a gene is replaced by simple one-step substitution techniques with a tetracycline-regulated promoter cassette (tetO(7) -TATA(CYC1) ) in cells where TetR/TetR'-based transcription activators/repressors are also produced. Using top1 and nse6 as reporter genes, we show that Top1 and Nse6 appear after just 30 min of activating tetO(7) -TATA(CYC1) and plateau after -4-6 h. The amount of synthesised protein is comparable to that produced from the attenuated nmt1 promoter P(nmt8) , which should be closer to wild-type levels for most genes than those generated from excessively strong promoters and can be controlled by changing the concentration of the effector antibiotic. This system also works efficiently during meiosis, thus making it a useful addition to the toolkit of the fission yeast community.

New multi-purpose high copy number vector with greater mitotic stability for diverse applications in fission yeast Schizosaccharomyces pombe

We have constructed a pUC19-based multipurpose ATG vector in Schizosaccharomyces pombe with higher copy number and mitotic stability possible with commonly used vectors. The vector, having an NdeI site in its polylinker to provide ATG site for expression, carries a greatly truncated version of URA3 gene, URA3m, of Saccharomyces cerevisiae as a selection marker. In addition, it contains the mat2P-right flank region (mat2P-RF) of S. pombe as an autonomous replicating sequence (ARS) and a polylinker with wider choice of restriction sites. While URA3m confers an increase in plasmid copy number up to 200 copies/cell, mat2P-RF imparts greater mitotic stability than the standard ars1 element of S. pombe. Finally, the vector also includes the transcription termination signal of the nmt1 gene (Tnmt1). This basic vector should serve as a versatile tool for studies of gene function in S. pombe.

A homeobox protein Phx1 regulates long-term survival and meiotic sporulation in Schizosaccharomyces pombe

BACKGROUND

In the fission yeast Schizosaccharomyces pombe, the phx1+ (pombe homeobox) gene was initially isolated as a multi-copy suppressor of lysine auxotrophy caused by depletion of copper/zinc-containing superoxide dismutase (CuZn-SOD). Overproduction of Phx1 increased the synthesis of homocitrate synthase, the first enzyme in lysine biosynthetic pathway, which is labile to oxidative stress. Phx1 has a well conserved DNA-binding domain called homeodomain at the N-terminal region and is predicted to be a transcription factor in S. pombe. However, its role has not been revealed in further detail. Here we examined its expression pattern and the phenotype of its null mutant to get clues on its function.

RESULTS

Fluorescence from the Phx1-GFP expressed from a chromosomal fusion gene demonstrated that it is localized primarily in the nucleus, and is distinctly visible during the stationary phase. When we replaced the N-terminal homeobox domain of Phx1 with the DNA binding domain of Pap1, a well-characterized transcription factor, the chimeric protein caused the elevation of transcripts from Pap1-dependent genes such as ctt1+ and trr1+, suggesting that Phx1 possesses transcriptional activating activity when bound to DNA. The amount of phx1+ transcripts sharply increased as cells entered the stationary phase and was maintained at high level throughout the stationary phase. Nutrient shift down to low nitrogen or carbon sources caused phx1+ induction during the exponential phase, suggesting that cells need Phx1 for maintenance function during nutrient starvation. The Δphx1 null mutant showed decreased viability in long-term culture, whereas overproduction of Phx1 increased viability. Decrease in long-term survival was also observed for Δphx1 under N- or C-starved conditions. In addition, Δphx1 mutant was more sensitive to various oxidants and heat shock. When we examined sporulation of the Δphx1/Δphx1 diploid strain, significant decrease in the formation of meiotic spores was observed.

CONCLUSIONS

Phx1 is a transcriptional regulator whose synthesis is elevated during stationary phase and by nutrient starvation in S. pombe. It supports long-term survival and stress tolerance against oxidation and heat, and plays a key role in the formation of meiotic spores.

Chromatin architectures at fission yeast transcriptional promoters and replication origins

We have used micrococcal nuclease (MNase) digestion followed by deep sequencing in order to obtain a higher resolution map than previously available of nucleosome positions in the fission yeast, Schizosaccharomyces pombe. Our data confirm an unusually short average nucleosome repeat length, ∼152 bp, in fission yeast and that transcriptional start sites (TSSs) are associated with nucleosome-depleted regions (NDRs), ordered nucleosome arrays downstream and less regularly spaced upstream nucleosomes. In addition, we found enrichments for associated function in four of eight groups of genes clustered according to chromatin configurations near TSSs. At replication origins, our data revealed asymmetric localization of pre-replication complex (pre-RC) proteins within large NDRs—a feature that is conserved in fission and budding yeast and is therefore likely to be conserved in other eukaryotic organisms.

Generation and analysis of a barcode-tagged insertion mutant library in the fission yeast Schizosaccharomyces pombe

Background

Barcodes are unique DNA sequence tags that can be used to specifically label individual mutants. The barcode-tagged open reading frame (ORF) haploid deletion mutant collections in the budding yeast Saccharomyces cerevisiae and the fission yeast Schizosaccharomyces pombe allow for high-throughput mutant phenotyping because the relative growth of mutants in a population can be determined by monitoring the proportions of their associated barcodes. While these mutant collections have greatly facilitated genome-wide studies, mutations in essential genes are not present, and the roles of these genes are not as easily studied. To further support genome-scale research in S. pombe, we generated a barcode-tagged fission yeast insertion mutant library that has the potential of generating viable mutations in both essential and non-essential genes and can be easily analyzed using standard molecular biological techniques.

Results

An insertion vector containing a selectable ura4⁺ marker and a random barcode was used to generate a collection of 10,000 fission yeast insertion mutants stored individually in 384-well plates and as six pools of mixed mutants. Individual barcodes are flanked by Sfi I recognition sites and can be oligomerized in a unique orientation to facilitate barcode sequencing. Independent genetic screens on a subset of mutants suggest that this library contains a diverse collection of single insertion mutations. We present several approaches to determine insertion sites.

Conclusions

This collection of S. pombe barcode-tagged insertion mutants is well-suited for genome-wide studies. Because insertion mutations may eliminate, reduce or alter the function of essential and non-essential genes, this library will contain strains with a wide range of phenotypes that can be assayed by their associated barcodes. The design of the barcodes in this library allows for barcode sequencing using next generation or standard benchtop cloning approaches.