Islet microencapsulation: a review

Biocompatible and nondegradable microcapsules using an ethylamine-bridged EGCG dimer for successful therapeutic cell transplantation

Conventional alginate microcapsules are widely used for encapsulating therapeutic cells to reduce the host immune response. However, the exchange of monovalent cations with divalent cations for crosslinking can lead to a sol-gel phase transition, resulting in gradual degradation and swelling of the microcapsules in the body. To address this limitation, we present a biocompatible and nondegradable epigallocatechin-3-gallate (EGCG)-based microencapsulation with ethylamine-bridged EGCG dimers (EGCG(d)), denoted as 'Epi-Capsules'. These Epi-Capsules showed increased physical properties and Ca2+ chelating resistance compared to conventional alginate microcapsules. Horseradish peroxidase (HRP) treatment is very effective in increasing the stability of Epi-Capsule((+)HRP) due to the crosslinking between EGCG(d) molecules. Interestingly, the Epi-Capsules(oxi) using a pre-oxidized EGCG(d) can support long-term survival (>90 days) of xenotransplanted insulin-secreting islets in diabetic mice in vivo, which is attributed to its structural stability and reactive oxygen species (ROS) scavenging for lower fibrotic activity. Collectively, this EGCG-based microencapsulation can create Ca2+ chelating-resistance and anti-oxidant activity, which could be a promising strategy for cell therapies for diabetes and other diseases.

Performance of islets of Langerhans conformally coated via an emulsion cross-linking method in diabetic rodents and nonhuman primates

Polyethylene glycol (PEG)-based conformal coating (CC) encapsulation of transplanted islets is a promising β cell replacement therapy for the treatment of type 1 diabetes without chronic immunosuppression because it minimizes capsule thickness, graft volume, and insulin secretion delay. However, we show here that our original CC method, the direct method, requiring exposure of islets to low pH levels and inclusion of viscosity enhancers during coating, severely affected the viability, scalability, and biocompatibility of CC islets in nonhuman primate preclinical models of type 1 diabetes. We therefore developed and validated in vitro and in vivo, in several small- and large-animal models of type 1 diabetes, an augmented CC method-emulsion method-that achieves hydrogel CCs around islets at physiological pH for improved cytocompatibility, with PEG hydrogels for increased biocompatibility and with fivefold increase in encapsulation throughput for enhanced scalability.

Non-woven textiles for medical implants: mechanical performances improvement

Non-woven textile has been largely used as medical implant material over the last decades, especially for scaffold manufacturing purpose. This material presents a large surface area-to-volume ratio, which promotes adequate interaction with biological tissues. However, its strength is limited due to the lack of cohesion between the fibers. The goal of the present work was to investigate if a non-woven substrate can be reinforced by embroidery stitching towards strength increase. Non-woven samples were produced from both melt-blowing and electro-spinning techniques, reinforced with a stitching yarn and tested regarding several performances: ultimate tensile strength, burst strength and strength loss after fatigue stress. Several stitching parameters were considered: distance between stitches, number of stitch lines (1, 2 or 3) and line geometry (horizontal H, vertical L, cross X). The performance values obtained after reinforcement were compared with values obtained for control samples. Results bring out that reinforcement can increase the strength by up to 50% for a melt-blown mat and by up to 100% for an electro-spun mat with an X reinforcement pattern. However, after cyclic loading, the reinforcement yarn tends to degrade the ES mat in particular. Moreover, increasing the number of stitches tends to fragilize the mats.

Designing biomaterials for the modulation of allogeneic and autoimmune responses to cellular implants in Type 1 Diabetes

The effective suppression of adaptive immune responses is essential for the success of allogeneic cell therapies. In islet transplantation for Type 1 Diabetes, pre-existing autoimmunity provides an additional hurdle, as memory autoimmune T cells mediate both an autoantigen-specific attack on the donor beta cells and an alloantigen-specific attack on the donor graft cells. Immunosuppressive agents used for islet transplantation are generally successful in suppressing alloimmune responses, but dramatically hinder the widespread adoption of this therapeutic approach and fail to control memory T cell populations, which leaves the graft vulnerable to destruction. In this review, we highlight the capacity of biomaterials to provide local and nuanced instruction to suppress or alter immune pathways activated in response to an allogeneic islet transplant. Biomaterial immunoisolation is a common approach employed to block direct antigen recognition and downstream cell-mediated graft destruction; however, immunoisolation alone still permits shed donor antigens to escape into the host environment, resulting in indirect antigen recognition, immune cell activation, and the creation of a toxic graft site. Designing materials to decrease antigen escape, improve cell viability, and increase material compatibility are all approaches that can decrease the local release of antigen and danger signals into the implant microenvironment. Implant materials can be further enhanced through the local delivery of anti-inflammatory, suppressive, chemotactic, and/or tolerogenic agents, which serve to control both the innate and adaptive immune responses to the implant with a benefit of reduced systemic effects. Lessons learned from understanding how to manipulate allogeneic and autogenic immune responses to pancreatic islets can also be applied to other cell therapies to improve their efficacy and duration. STATEMENT OF SIGNIFICANCE: This review explores key immunologic concepts and critical pathways mediating graft rejection in Type 1 Diabetes, which can instruct the future purposeful design of immunomodulatory biomaterials for cell therapy. A summary of immunological pathways initiated following cellular implantation, as well as current systemic immunomodulatory agents used, is provided. We then outline the potential of biomaterials to modulate these responses. The capacity of polymeric encapsulation to block some powerful rejection pathways is covered. We also highlight the role of cellular health and biocompatibility in mitigating immune responses. Finally, we review the use of bioactive materials to proactively modulate local immune responses, focusing on key concepts of anti-inflammatory, suppressive, and tolerogenic agents.

Hypoparathyroidism: State of the Art on Cell and Tissue Therapies

Hypoparathyroidism is an endocrine disorder characterized by low serum calcium levels, high serum phosphorus levels, and by inappropriate or absent secretion of the parathyroid hormone (PTH). The most common therapeutic strategy to treat this condition is hormone replacement therapy with calcium and vitamin D but, unfortunately, in the long term this treatment may not be sufficient to compensate for the loss of endocrine function. Glandular autotransplantation is considered the most effective technique in place of replacement therapy. Although it leads to excellent results in most cases, autotransplantation is not always possible. Allograft is a good way to treat patients who have not been able to undergo autograft, but this technique has limited success due to side effects related to tissue rejection. This therapy is supported by systemic immunosuppression, which leads to the onset of serious side effects in patients, with a risk of endocrine toxicity. Today, research on endocrine disorders is focused on discovering alternative graft therapies that can allow optimal results with the fewest possible side effects. In this review, we will make an update on the current state of the art about the cell and tissue therapy as treatment for hypoparathyroidism, to identify which type of therapeutic strategy could be valid for a future clinical use.

Applying Immunomodulation to Promote Longevity of Immunoisolated Pancreatic Islet Grafts

Islet transplantation is a promising therapy for insulin-dependent diabetes, but large-scale application is hampered by the lack of a consistent source of insulin-producing cells and need for lifelong administration of immunosuppressive drugs, which are associated with severe side effects. To avoid chronic immunosuppression, islet grafts can be enveloped in immunoisolating polymeric membranes. These immunoisolating polymeric membranes protect islet grafts from cell-mediated rejection while allowing diffusion of oxygen, nutrients, and insulin. Although clinical trials have shown the safety and feasibility of encapsulated islets to control glucose homeostasis, the strategy does up till now not support long-term graft survival. This partly can be explained by a significant loss of insulin-producing cells in the immediate period after implantation. The loss can be prevented by combining immunoisolation with immunomodulation, such as combined administration of immunomodulating cytokines or coencapsulation of immunomodulating cell types such as regulatory T cells, mesenchymal stem cells, or Sertoli cells. Also, administration of specific antibodies or apoptotic donor leucocytes is considered to create a tolerant microenvironment around immunoisolated grafts. In this review, we describe the outcomes and limitations of these approaches, as well as the recent progress in immunoisolating devices. Impact statement Immunoisolation by enveloping islets in semipermeable membranes allows for successful transplantation of islet grafts in the absence of chronic immunosuppression, but the duration of graft survival is still not permanent. The reasons for long-term final graft failure is not fully understood, but combining immunoisolation with immunomodulation of tissues or host immune system has been proposed to enhance the longevity of grafts. This article reviews the recent progress and challenges of immunoisolation, as well as the benefits and feasibility of combining encapsulation approaches with immunomodulation to promote longevity of encapsulated grafts.

Fibrous biomaterials: Effect of textile topography on foreign body reaction

Foreign Body Reaction (FBR) is a critical issue to be addressed when polyethylene terephthalate (PET) textile implants are considered in the medical field to treat pathologies involving hernia repair, revascularization strategies in arterial disease, and aneurysm or heart valve replacement. The natural porosity of textile materials tends to induce exaggerated tissue ingrowth which may prevent the implants from remaining flexible. The purpose of this study is to assess the influence of the textile topography of various woven substrates on the wetting properties of these substrates and on their in vitro interaction with mesenchymal stem cells (MSC) at 24 and 72 hr. The tests were performed both at yarn and fabric level under forced wetting and ingrowth conditions in order to replicate the mechanisms going on in vivo under blood pressure. Results demonstrate that cell proliferation is influenced by the textile wetting properties, which can be tuned at yarn and fabric level. In particular, it is shown that a satin weave obtained from porous spun yarn limits cell proliferation due to the high porosity of the yarn and the limited saturation index of the weave. Yarn and fabric saturation seems to play a predominant role in cell proliferation on textile substrates.

Subtle influence on alginate gel properties through host–guest interactions between covalently appended cyclodextrin and adamantane units

Host–guest interactions between functionalized alginate chains modulate the physico-chemical properties of alginate gels.

Surface modification of polymer textile biomaterials by N2 supercritical jet: Preliminary mechanical and biological performance assessment

Foreign Body Reaction (FBR) is a critical issue to be addressed when polyethylene terephthalate (PET) textile implants are considered in the medical field to treat pathologies involving hernia repair, revascularization strategies in arterial disease, and aneurysm or heart valve replacement. The natural porosity of textile materials tends to induce exaggerated tissue ingrowth which may prevent the implants from remaining flexible. One hypothesized way to limit the FBR process is to increase the material surface roughness at the yarn level. Supercritical N₂ (ScN₂) jet particle projection is a technique that provides enough velocity to particles in order to induce plastic deformation on the impacted surface. This work investigates the influence of ScN₂ jet projection parameters like standoff distance or particle size on the roughness that can be obtained on medical polymer yarns of various diameters (100 and 400 μm) and woven textile surfaces obtained from a 100 μm yarn. Moreover, the mechanical and biological performances of the obtained modified textile material are assessed. Results bring out that with appropriate testing conditions (500 bars jet/500 mm distance between nozzle and PET textile) and particle size around 50 μm, it is possible to generate 20 μm large and 4 μm deep craters on a 100 μm monofilament PET yarn and fabric. Regarding the strength of the textile material, it is only slightly modified with the treatment process, as the tenacity of the yarns decreases by only 10%. Moreover, It is shown that the obtained structures tend to limit the adhesion and slow down the proliferation of human fibroblasts.

Kinetics of Poly-l-lysine Adsorption on Mica and Stability of Formed Monolayers: Theoretical and Experimental Studies

Various physicochemical parameters of poly-l-lysine (PLL) solutions comprising the diffusion coefficient, the electrophoretic mobility, the density, and the intrinsic viscosity were determined for the pH range 3.0-9.2. This allowed us to calculate derivative parameters characterizing the PLL molecule such as: zeta potential, the number of electrokinetic charges, ionization degree, contour length, and cross section area. These data were exploited in theoretical calculations of PLL adsorption kinetics on solid substrates under diffusion transport. A hybrid approach was used comprising a blocking function derived from the random sequential adsorption (RSA) model. In experiments, the PLL adsorption on mica was studied using the streaming potential measurements and interpreted in terms of a general electrokinetic model. This confirmed a side-on adsorption mechanism of the macroion molecules at the examined pH range. Additionally, using this method, the stability of PLL monolayers was determined performing in situ desorption kinetic experiments. In this way, the equilibrium adsorption constant and the energy minimum depth were determined. It was confirmed that the monolayer stability decreases with pH following the decrease in the number of electrokinetic charges per molecule. This confirmed the electrostatic interaction driven adsorption mechanism of PLL. It is also predicted that at pH 5.7-7.4 the monolayers were stable under diffusion-controlled desorption over the time exceeding 100 h. In addition to their significance for basic science, the results obtained in this work can be exploited for developing procedures for preparing stable PLL monolayers of well controlled coverage and electrokinetic properties.

Irregular dynamics of cellular blood flow in a model microvessel

The flow of red blood cells within cylindrical vessels is complex and irregular, so long as the vessel diameter is somewhat larger than the nominal cell size. Long-time-series simulations, in which cells flow 10^{5} vessel diameters, are used to characterize the chaotic kinematics, particularly to inform reduced-order models. The simulation model used includes full coupling between the elastic red blood cell membranes and surrounding viscous fluid, providing a faithful representation of the cell-scale dynamics. Results show that the flow has neither classifiable recurrent features nor a dominant frequency. Instead, its kinematics are sensitive to the initial flow configuration in a way consistent with chaos and Lagrangian turbulence. Phase-space reconstructions show that a low-dimensional attractor does not exist, so the observed long-time dynamics are effectively stochastic. Based on this, a simple Markov chain model for the dynamics is introduced and shown to reproduce the statistics of the cell positions.

Tissue-engineering approaches in pancreatic islet transplantation

Pancreatic islet transplantation is a promising alternative to whole-pancreas transplantation as a treatment of type 1 diabetes mellitus. This technique has been extensively developed during the past few years, with the main purpose of minimizing the complications arising from the standard protocols used in organ transplantation. By using a variety of strategies used in tissue engineering and regenerative medicine, pancreatic islets have been successfully introduced in host patients with different outcomes in terms of islet survival and functionality, as well as the desired normoglycemic control. Here, we describe and discuss those strategies to transplant islets together with different scaffolds, in combination with various cell types and diffusible factors, and always with the aim of reducing host immune response and achieving islet survival, regardless of the site of transplantation.

Encapsulated islets for diabetes therapy: history, current progress, and critical issues requiring solution

Insulin therapy became a reality in 1921 dramatically saving lives of people with diabetes, but not protecting them from long-term complications. Clinically successful free islet implants began in 1989 but require life long immunosuppression. Several encapsulated islet approaches have been ongoing for over 30 years without defining a clinically relevant product. Macro-devices encapsulating islet mass in a single device have shown long-term success in large animals but human trials have been limited by critical challenges. Micro-capsules using alginate or similar hydrogels encapsulate individual islets with many hundreds of promising rodent results published, but a low incidence of successful translation to large animal and human results. Reduction of encapsulated islet mass for clinical transplantation is in progress. This review covers the status of both early and current studies including the presentation of corporate efforts involved. It concludes by defining the critical items requiring solution to enable a successful clinical diabetes therapy.

The reconstruction of lung alveolus-like structure in collagen-matrigel/microcapsules scaffolds in vitro

This study attempted to use collagen–Matrigel as extracellular matrix (ECM) to supply cells with three-dimensional (3D) culture condition and employ alginate-poly-l-lysine-alginate (APA) microcapsules to control the formation of alveolus-like structure in vitro. We tested mice foetal pulmonary cells (FPCs) by immunohistochemistry after 2D culture. The alveolus-like structure was reconstructed by seeding FPCs in collagen–Matrigel mixed with APA microcapsules 1.5 ml. A self-made mould was used to keep the structure from contraction. Meanwhile, it provided static stretch to the structure. After 7, 14 and 21 days of culture, the alveolus-like structure was analysed histologically and immunohistochemically, or by scanning transmission electron microscopy (TEM). We also observed these structures under inverted phase contrast microscope. The expression of pro-surfactant protein C (SpC) was detected by reverse transcription-polymerase chain reaction (RT-PCR). We obtained fibroblasts, epithelial cells and alveolar type II (AE2) cells in FPCs. In the reconstructed structure, seeding cells surrounding the APA microcapsules constructed alveolus-like structures, the size of them ranges from 200 to 300 μm. In each reconstructed lung tissue sheet, microcapsules had integrity. Pan-cytokeratin, vimentin and SpC positive cells were observed in 7- and 14-day cultured structures. TEM showed lamellar bodies of AE2 cells in the reconstructed tissues whereas RT-PCR expressed SpC gene. Primary mice FPCs could form alveolus-like structures in collagen–Matrigel/APA microcapsules engineered scaffolds, which could maintain a differentiated state of AE2 cells.

Long-term graft function of cryostored alginate encapsulated rat islets

Microencapsulation of pancreatic islets before transplantation is a promising approach to enable graft function in an immunocompetent recipient without immunosuppression. However, the insufficient availability of allogenic islet tissue is a major problem. One concept to overcome these shortcomings is the cryopreservation of encapsulated allogenic islets. Recently, we reported a gentle cryopreservation protocol for rat islets encapsulated in an alginate-based microcapsule system. Here, we report for the first time long-term transplantation data of these cryopreserved microencapsulated islets. We detected a stable graft function for more than 12 month (experiments still continuing) after transplantation of 2500 cryopreserved microencapsulated CD rat islets in streptozotocin-diabetic Wistar rats. Moreover, the glucose clearance rate during an IPGTT was well preserved up to 56 weeks after transplantation. In addition, hyperglycemic blood glucose levels after removal of rat islet grafts 12 and 56 weeks after transplantation confirmed the efficacy of the encapsulated islets. Finally, the retrieved encapsulated rat islets responded well with a 7-fold increase of insulin secretion to a glucose stimulus (12 and 56 weeks). In conclusion, our study demonstrates for the first time that cryopreservation of encapsulated rat islets is possible without substantial losses on graft function for a very long time.

Biocompatibility and physicochemical characteristics of alginate-polycation microcapsules

There is a need for better understanding of the biocompatibility of alginate-polycation microcapsules based on their physicochemical characteristics. Microcapsules composed of alginate with 44% (IntG) or 71% (HiG) guluronate, gelled with calcium (Ca) or barium (Ba) and coated with poly-L-lysine (PLL) or poly-l-ornithine (PLO), followed by IntG alginate were compared. For microcapsules with an IntG(Ca) gel core, using PLO instead of PLL resulted in less immune cell adhesion after 2 days in C57BL/6J mice. The PLO microcapsules were also characterized by greater hydrophilicity and superior resistance to swelling and damage under osmotic stress. For microcapsules with a PLL membrane, replacing the IntG(Ca) gel core with IntG(Ba) or HiG(Ca) gel resulted in stronger immune responses (p<0.05). This was explained by poor penetration of PLL into the gel, as demonstrated by Fourier transform infrared spectroscopy analyses and membrane rupturing during osmotic swelling. X-ray photoelectron spectroscopy analyses show that all microcapsules had the same amount of polycation at their surface. Moreover, alginate coatings had non-significant effects on the biocompatibility and physicochemical properties of the microcapsules. Thus, alginate-polycation interactions for membrane formation are more important for biocompatibility than either the quantity of polycation at the surface or the alginate coating.

Cryopreservation of adherent cells: strategies to improve cell viability and function after thawing

The commonly applied cryopreservation protocols routinely used in laboratories worldwide were developed for simple cell suspensions, and their application to complex systems, such as cell monolayers, tissues, or biosynthetic constructs, is not straightforward. In particular for monolayer cultures, cell detachment and membrane damage are often observed after cryopreservation. In this work, combined strategies for the cryopreservation of cells attached to Matrigel-coated well plate's surfaces were investigated based on cell entrapment in clinicalgrade, ultra-high viscosity alginate using two cell lines, neuroblastoma N2a and colon adenocarcinoma Caco-2, with distinct structural and functional characteristics. As the cryopreservation medium, serum-free CryoStor solution was compared with serum-supplemented culture medium, both containing 10% DMSO. Using culture medium, entrapment beneath an alginate layer was needed to improve cell recovery by minimizing membrane damage and cell detachment after thawing; nevertheless, up to 50% cell death still occurred within 24 h after thawing. The use of CryoStor solution represented a considerable improvement of the cryopreservation process for both cell lines, allowing the maintenance of high postthaw membrane integrity as well as full recovery of metabolic activity and differentiation capacity within 24 h postthawing; in this case, entrapment beneath an alginate layer did not confer further protection to cryopreserved Caco-2 cells, but was crucial for maintenance of attachment and integrity of N2a neuronal networks.

Islet transplantation: the quest for an ideal source

The progress of islet transplantation as a new therapy for patients with diabetes mellitus depends directly upon the development of efficient and practical immunoisolation methods for the supply of sufficient quantities of islet cells. Without these methods, large scale clinical application of this therapy would be impossible. Two eras of advances can be identified in the development of islet transplantation. The first was an era of experimental animal and human research that centered on islet isolation procedures and transplantation in different species as evidence that transplanted islets have the capability to reverse diabetes. The second was the era of the Edmonton protocol, when the focus became the standardization of isolation procedures and introduction of new immunosuppressive drugs to maintain human allograft transplantation. The quest for an alternative source for islets (xenographs, stem cells and cell cultures) to overcome the shortage of human islets was an important issue during these eras. This paper reviews the history of islet transplantation and the current procedures in human allotransplantation, as well as different types of immunoisolation methods. It explores novel approaches to enhancing transplantation site vascularity and islet cell function, whereby future immunoisolation technology could offer additional therapeutic advantages to human islet allotransplantation.

Surface chemistry influences implant biocompatibility

Implantable medical devices are increasingly important in the practice of modern medicine. Unfortunately, almost all medical devices suffer to a different extent from adverse reactions, including inflammation, fibrosis, thrombosis and infection. To improve the safety and function of many types of medical implants, a major need exists for development of materials that evoked desired tissue responses. Because implant-associated protein adsorption and conformational changes thereafter have been shown to promote immune reactions, rigorous research efforts have been emphasized on the engineering of surface property (physical and chemical characteristics) to reduce protein adsorption and cell interactions and subsequently improve implant biocompatibility. This brief review is aimed to summarize the past efforts and our recent knowledge about the influence of surface functionality on protein:cell:biomaterial interactions. It is our belief that detailed understandings of bioactivity of surface functionality provide an easy, economic, and specific approach for the future rational design of implantable medical devices with desired tissue reactivity and, hopefully, wound healing capability.

Cryopreservation of Insulin-Producing Cells Microencapsulated in Sodium Cellulose Sulfate

INTRODUCTION

Diabetes mellitus may be treated with pancreatic islet cell transplantation. The use of xenogenic islet cells may overcome the shortage of human donor organs. Microencapsulation seems to be a promising method for immunoprotection. Since isolation, purification, encapsulation, and transplantation of islet cells are labor-intensive, cryopreservation has emerged as an attractive system for islet banking. In this study sodium cellulose sulfate (NaCS), a novel method for microencapsulation of islet cells, was tested for its capability to protect cells during cryopreservation.

METHODS

HIT-T15 cells were microencapsulated in NaCS. Cells were frozen and thawed using three different media containing varying amounts of dimethylsulfoxide (DMSO) and glycerol. Cell viability and cell growth were monitored using 3-(-4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide before freezing and 1 week after thawing.

RESULTS

NaCS did not show any negative impact on the growth rates of encapsulated HIT-T15 cells compared with nonencapsulated controls. Nonencapsulated cells were adequately cryopreserved by both DMSO- and glycerol-containing freezing media. DMSO was not suitable for cryopreservation of encapsulated HIT-T15 cells, whereas glycerol seemed to produce no considerable cell loss during freezing and thawing.

DISCUSSION

Islet banking of cells encapsulated in NaCS was feasible. Microencapsulation did not harm islet cell recovery. As NaCS is less immunogenic and more biocompatible than other materials used for microencapsulation, it may be a promising method for immunoisolation of islet cells to replace the endocrine pancreas in a physiological way.

Morphological and functional characterization of a pancreatic beta-cell line microencapsulated in sodium cellulose sulfate/poly(diallyldimethylammonium chloride)

BACKGROUND

Late diabetic complications cannot be prevented totally by current antidiabetic strategies. Therefore, new therapeutic concepts of insulin replacement such as pancreas transplantation are evolving. Due to the shortage of human donor organs, transplantation of microencapsulated xenogeneic pancreatic islet cells has attracted considerable attention. Sodium cellulose sulfate/poly(diallyldimethylammonium chloride) (NaCS/PDADMAC) is a material with favorable biogenic properties that has been used for microencapsulation of various cell types. However, there are no data on the suitability of NaCS/PDADMAC for microencapsulation of pancreatic beta-cells.

MATERIAL AND METHODS

Cell growth and viability of NaCS/PDADMAC-microencapsulated HIT-T15 cells, an immortalized hamster pancreatic beta-cell line, were assessed using a dimethylthiazol-diphenyltetrazoliumbromide (MTT)-based cell growth determination kit and apoptosis was detected by antibodies against activated caspase 3. Glucose-dependent insulin secretion was assessed with ELISA and the uptake of glucose was measured using fluorescence-labeled glucose.

RESULTS

Statistical analysis revealed no differences in glucose-dependent cell proliferation, insulin secretion and glucose uptake between non-microencapsulated and microencapsulated HIT-T15 cells. Stimulation of HIT-T15 cells with glucose (100 mg/ml) resulted in a biphasic insulin secretion response.

CONCLUSION

Microencapsulation of HIT-T15 cells in NaCS/PDADMAC does not influence cell proliferation, insulin secretion and glucose uptake. Our results indicate that NaCS/PDADMAC is well suited for microencapsulation of pancreatic beta-cells.

Real-time 3-D dark-field microscopy for the validation of the cross-linking process of alginate microcapsules

Alginate-based microencapsulation is a promising method for long-term maintenance of cellular and membrane function of the cells and tissue fragments required for in vitro and in vivo biosensors, for tissue engineering and particularly for immunoisolation of non-autologous transplants. Microcapsules of high mechanical strength and optimum permeability can be produced by injection of BaCl2 crystals into alginate droplets before they come into contact with external Ba2+. A key requirement is that the system parameters (number of crystals, speed of the crystal stream etc.) are properly adjusted according to the mannuronic and guluronic acid ratio and the average molecular mass of the alginate as well as to the diameter of the microcapsules. Robust, reliable, rapid and low-cost validation tools are, therefore, needed for assurance of the microcapsule quality. Here, we describe a novel three-dimensional (3-D) dark-field microscopy that allows the real-time measurement of the number and spatial distribution of the injected Ba2+ ions throughout the microcapsules after treatment with sulphate. This novel method requires only a conventional microscope equipped with three polarising filters and a double aperture stop. In contrast to confocal laser scanning microscopy images, peripherally attached BaSO4 precipitates can clearly be distinguished from internal ones. The data also demonstrate that several steps of the alginate gelling process must be improved before such immunoisolation can be used in patients.

Porcine islet cells microencapsulated in sodium cellulose sulfate

One hundred fifty million people suffer from diabetes mellitus worldwide. Modern exogenous insulin therapy cannot prevent late complications. Islet cell transplantation could be a sufficient therapeutic option but the shortage of human organs limits this option. The use of xenogeneic porcine islet cells may also be a viable alternative. One way to manage hyperacute rejection is by the protection of xenogeneic cells from the immune system by microencapsulation. In this study sodium cellulose sulfate (NaCS) was evaluated as a material for encapsulation. An insulin-producing cell line (HIT-T15) was established in our laboratory. Glucose-dependent insulin production and cell growth were monitored. Cells were encapsulated with NaCS by Austrianova, Vienna. The insulin production and mitosis rate were examined. Cell growth and insulin production by HIT-T15 cells affected the glucose levels in the nutrient solution. Cell viability and glucose-dependent insulin production were not influenced by NaCS. Encapsulation with NaCS is feasible and it could be shown that the material is permeable to nutrients and metabolic side products. The encapsulated cells are able to detect the glucose concentration in the nutrient solution and to react in a proper way by producing insulin. Encapsulation with NaCS, which is more biocompatible and less immunogenic than other materials, seems to be a promising method for immunoisolation of porcine beta cells for xenotransplantation to replace the endocrine pancreas in a physiologic way.

Long-term graft function of adult rat and human islets encapsulated in novel alginate-based microcapsules after transplantation in immunocompetent diabetic mice

We describe the results of the first study to show that adult rat and human islets can be protected against xenogenic rejection in immunocompetent diabetic mice by encapsulating them in a novel alginate-based microcapsule system with no additional permselective membrane. Nonencapsulated islets lost function within 4-8 days after being transplanted into diabetic Balb/c mice, whereas transplanted encapsulated adult rat or human islets resulted in normoglycemia for >7 months. When rat islet grafts were removed 10 and 36 weeks after transplantation, the mice became immediately hyperglycemic, thus demonstrating the efficacy of the encapsulated islets. The explanted capsules showed only a mild cellular reaction on their surface and a viability of >85%, and responded to a glucose stimulus with a 10-fold increase in insulin secretion. Furthermore, transplanted mice showed a slight decrease in the glucose clearance rate in response to intraperitoneal glucose tolerance tests 3-16 weeks after transplantation; after 16 weeks, the rate remained stable. Similar results were obtained for encapsulated human islets. Thus we provide the first evidence of successful transplantation of microencapsulated human islets. In conclusion, we have developed a novel microcapsule system that enables survival and function of adult rat and human islets in immunocompetent mice without immunosuppression for >7 months.

Fabrication of homogeneously cross-linked, functional alginate microcapsules validated by NMR-, CLSM- and AFM-imaging

Cross-linked alginate microcapsules of sufficient mechanical strength can immunoisolate cells for the long-term treatment of hormone and other deficiency diseases in human beings. However, gelation of alginate by external Ba(2+) (or other divalent cations) produces non-homogeneous cross-linking of the polymeric mannuronic (M) and guluronic (G) acid chains. The stability of such microcapsules is rather limited. Here, we show that homogeneous cross-linking can be achieved by injecting BaCl(2) crystals into alginate droplets before they come into contact with external BaCl(2). The high effectiveness of this crystal gun method is demonstrated by confocal laser scanning microscopy and by advanced nuclear magnetic resonance imaging. Both techniques gave clear-cut evidence that homogeneous cross-linkage throughout the microcapsule is only obtained with simultaneous internal and external gelation. Atomic force microscopy showed a very smooth surface topography for microcapsules made by the crystal gun method, provided that excess Ba(2+) ions were removed immediately after gelation. In vitro experiments showed greatly suppressed swelling for crystal gun microcapsules. Even alginate extracted from Lessonia nigrescens (highly biocompatible) yielded microcapsules with long-term mechanical stability not hitherto possible. Encapsulation of rat islets, human monoclonal antibodies secreting hybridoma cells and murine mesenchymal stem cells transfected with cDNA encoding for bone morphogenetic protein (BMP-4) revealed that injection of BaCl(2) crystals has no adverse side effects on cell viability and function. However, the release of low-molecular weight factors (such as insulin) may be delayed when using alginate concentrations in the usual range.

Encapsulation of individual pancreatic islets by sol-gel SiO2: a novel procedure for perspective cellular grafts

Pancreatic rat islets are encapsulated by a siliceous layer deposited on the surface of single islets upon reaction with gaseous siliceous precursors. The process preserves original islet dimensions and does not suppress viability or function. The encapsulated material is homogeneously distributed on the islet surface, and layer thickness can be controlled in the 0.1-2.0 microm interval. Dynamic perfusion experiments with glucose stimulation were carried out in both encapsulated and non-encapsulated islets. Results were treated according to a kinetic model presented here for the analysis of perfusion data; the model tested by literature data, was used to substantiate the diffusion features of the siliceous layer, which does not affect mass transfer of insulin but which modifies the texture of the islet surface tissue. The clinical potential of silica encapsulation was demonstrated by in vivo experiments using encapsulated islets transplanted into diabetic rats. Transplantation was carried out in both inbred and outbred rats and indicated prolonged restoration of normal glycaemia levels and protection from immunological attack.

Durability of sodium sulfate-treated polylysine-alginate microcapsules

Chelated hollow microcapsules are unstable under in vitro conditions because of their hygroscopic nature. Nongel inducing cations, such as Na+, stabilize the outer membrane of the alginate-polylysine-alginate microcapsules leading to more stable beads. We made different batches of empty capsules with a mean +/- SEM diameter of 607+/-11 microns, and found that within 1 week of incubating these capsules in normal saline at 37 degrees C, they increased to 718+/-10 microns (p < 0.05, n = 5). In initial experiments, we made different batches of capsules and divided them into two groups. One group was left untreated (control) whereas the other was treated with 6 mM Na2SO4 for 30 min, before incubation in saline at 37 degrees C. Control capsules increased in weight and size, before beginning to melt in less than 1 week. In contrast, treated capsules rapidly lost weight and remained intact during 1 month of follow-up. In perifusion experiments, we found no deleterious effect of sodium sulfate treatment on the function of islets enclosed in the capsules.

Human islet cell transplantation--future prospects

BACKGROUND

Islet transplantation has the potential to cure diabetes mellitus. Nevertheless despite successful reversal of diabetes in many small animal models, the clinical situation has been far more challenging. The aim of this review is to discuss why insulin-independence after islet allotransplantation has been so difficult to achieve.

METHODS

A literature review was undertaken using Medline from 1975 to July 2000. Results reported to the International Islet Transplant Registry (ITR) up to December 1998 were also analysed.

RESULTS

Up to December 1998, 405 islet allotransplants have been reported the ITR. Of those accurately documented between 1990 and 1998 (n = 267) only 12% have achieved insulin-independence (greater than 7 days). However with refined peri-transplant protocols insulin independence at 1 year can reach 20%.

CONCLUSIONS

There are many factors which can explain the failure of achieving insulin-independence after islet allotransplantation. These include the use of diabetogenic immunosuppressive agents to abrogate both islet allo-immunity and auto-immunity, the critical islet mass to achieve insulin-independence and the detrimental effects of transplanting islets in an ectopic site. However recent evidence most notably from the Edmonton group demonstrates that islet allotransplantation still has great potential to become an established treatment option for diabetic patients.

Islet cell transplantation for the treatment of diabetes mellitus

Diabetes mellitus is estimated to affect at least 16 million individuals in the United States and 135 million persons worldwide. It is a significant cause of morbidity and early mortality. The related expenses are astronomical with at least 15% of healthcare expenditures in the United States being used for the treatment of diabetes and its complications, a figure that approaches US$100 billion annually. The Diabetes Control and Complications Trial (DCCT) convincingly showed that intensive glucose management delays the onset and slows the progression of diabetic complications. Numerous studies have shown that pancreas transplantation not only delays the onset and progression of diabetic complications, but in some cases reverses some of the effects of diabetes. Human islet cell transplantation provides an alternative, less invasive alternative to whole organ transplantation. Human islet allotransplantation would only exacerbate the organ shortage, as recipients usually require islets from more than one pancreas. Xenotransplantation of porcine islets is a more attractive option; however, the recipient's immune response to xenografted tissue would be a formidable obstacle. Microencapsulation of the islets is a method of immunoisolation that would prevent the need for immunosuppressive drugs and the risks associated with their long-term use and have the potential to make xenoislet transplantation a clinical reality.

Immunocompatibility and biocompatibility of cell delivery systems

Immunoisolation therapy overcomes important disadvantages of implanting free cells. By mechanically blocking immune attacks, synthetic membranes around grafted cells should obviate the need for immunosuppression. The membrane used for encapsulation must be biocompatible and immunocompatible to the recipient and also to the encapsulated graft. The ability of the host to accept the implanted graft depends not only on the material used for encapsulation, but also on the defense reaction of the recipient, which is very individual. Such a reaction usually starts as absorption of cell-adhesive proteins, immunoglobulins, complement components, growth factors and some other proteins on the surface of the device. The absorption of proteins is difficult to avoid, but the amount and specificity of absorbed proteins can be controlled to some extent by selection and modification of the device material. If the adsorption of proteins to the surface of the implanted material is reduced, the overgrowth of the device with fibroblast-like and macrophage-like cells is also reduced. Cell adhesion at the surface of the implanted device is, in addition to the selected polymeric material, greatly influenced by the device content. Xenografts trigger a more vigorous inflammatory reaction than allografts, most probably due to the release of antigenic products from encapsulated deteriorated and dying cells which diffuse through the membrane and activate adhering immune cells. There is an evident effect of autoimmune status on the fate of the encapsulated graft. While encapsulated xenogeneic islets readily reverse streptozotocin-induced diabetes in mice, the same xenografts are short-functioning in NOD autoimmune diabetes-prone mice. Autoantibodies, to which most devices are impermeable, are not involved. Among the cytotoxic factors which are responsible for the limited survival of the encapsulated graft the most important are cytokines and perhaps some other low-molecular-weight factors released by activated macrophages at the surface of the encapsulating membrane.

19F-MRI in vivo determination of the partial oxygen pressure in perfluorocarbon-loaded alginate capsules implanted into the peritoneal cavity and different tissues

Semipermeable hydrogels formed with a biocompatible alginate solution and Ba(2+) ions protect encapsulated cells and tissues from a foreign immune system. For the viability and metabolic activity of the encapsulated materials, a sufficient oxygen supply inside the capsules is necessary. Quantitative (19)F-MRI was performed on perfluorocarbon-loaded alginate capsules implanted into the peritoneal cavity, the musculus quadriceps femoris, and beneath the kidney capsule of rats, in order to determine in vivo the partial oxygen pressure (pO(2)) inside the capsules at these implantation sites. The temporal behavior of the pO(2) values was observed for at least 3 months. The most stable values over time were observed in the kidney, where inter-rat pO(2) differences were considerable. In the muscle, the values were very high directly after implantation and decreased to nearly zero after 2 weeks. In the peritoneal cavity, values changed randomly over a wide range between different rats and over time. Magn Reson Med 42:1039-1047, 1999.

Compressive and shear properties of alginate gel: effects of sodium ions and alginate concentration

The equilibrium and viscoelastic properties of alginate gel crosslinked with Ca2+ were determined as a function of alginate concentration and duration of exposure to physiologic concentrations of NaCl. Compressive and shear stress relaxation tests and oscillatory shear tests were performed to measure the material properties at two time periods after storage in NaCl compared to no NaCl exposure. The effect of concentration was determined by testing 1-3% alginate gel in a bath of physiological NaCl and CaCl2. After 15 h of exposure to NaCl, the compressive, equilibrium shear, and dynamic shear moduli decreased by 63, 84, and 90% of control values, respectively. The material properties exhibited no further changes after 7 days of exposure to NaCl. The loss angle and amplitude of the relaxation function in the shear also decreased, indicating less viscous behaviors in both dynamic and transient configurations. All moduli, but not the loss angle, significantly increased with increasing alginate concentration. The observed decrease in compressive and shear stiffness for alginate gel after exposure to Na+ was significant and indicated that physiological conditions will soften the gel over a time period of up to 7 days after gelation. The alginate gel retains significant solid-like behaviors, however, as measured by a loss angle of approximately 3 degrees. This study provides the first available data for material properties of alginate gel tested in physiological saline.

Host response to tissue engineered devices

The two main components of a tissue engineered device are the transplanted cells and the biomaterial, creating a device for the restoration or modification of tissue or organ function. The implantation of polymer/cell constructs combines concepts of biomaterials and cell transplantation. The interconnections between the host responses to the biomaterial and transplanted cells determines the biocompatibility of the device. This review describes the inflammatory response to the biomaterial component and immune response towards transplanted cells. Emphasis is on how the presence of the transplanted cell construct affects the host response. The inflammatory response towards a biomaterial can impact the immune response towards transplanted cells and vice versa. Immune rejection is the most important host response towards the cellular component of tissue engineered devices containing allogeneic, xenogeneic or immunogenic ex vivo manipulated autologous cells. The immune mechanisms towards allografts and xenografts are outlined to provide a basis for the mechanistic hypotheses of the immune response towards encapsulated cells, with antigen shedding and the indirect pathway of antigen presentation predominating. A review of experimental evidence illustrates examples of the inflammatory response towards biodegradable polymer scaffold materials, examples of devices appropriately integrated as assessed morphologically with the host for various applications including bone, nerve, and skin regeneration, and of the immune response towards encapsulated allogeneic and xenogeneic cells.

[Use of islet cells in cell therapy]

Insulin dependent diabetes mellitus is a common disease affecting 1.5 million patients in Europe. It is currently treated by multiple injections of insulin associated with blood glucose self monitoring. The goal of the treatment is to obtain near normal glucose concentration, in order to prevent the later complications (retinopathy, nephropathy, neuropathy, macroangiopathy) of the disease--which may be severe--while avoiding severe hypoglycaemia. Although diabetes therapy has improved enormously in the last few decades, intensive research is currently aimed at replacing not only the missing hormone but also the cells which normally produce insulin in the pancreas. Transplantation of insulin secreting cells as a treatment of diabetes mellitus therefore has a special significance among other applications of cell therapy, since it deals with a disease which already has an efficient therapy. The aim of this article is the discussion of the objectives and the hopes in this field.

Biocompatibility of mannuronic acid-rich alginates

Highly purified algin preparations free of adverse contaminants with endotoxins and other mitogens recently became available by a new purification process (Klöck et al., Appl. Microbiol. Biotechnol., 1994, 40, 638-643). An advantage of this purification protocol is that it can be applied to alginates with various ratios of mannuronic acid to guluronic acid. High mannuronic acid alginate capsules are of particular practical interest for cell transplantation and for biohybrid organs, because mannuronate-rich alginates are usually less viscous, allowing one to make gels with a higher alginate content. This will increase their stability and reduce the diffusion permeability and could therefore protect immobilized cells more efficiently against the host immune system. Here we report the biocompatibility of purified, mannuronic acid-rich alginate (68% mannuronate residues) in a series of in vitro, as well as in vivo, assays. In contrast to raw alginate extracts, the purified product showed no mitogenic activity towards murine lymphocytes in vitro. Its endotoxin content was reduced to the level of the solvent. Animal studies with these new, purified algin formulations revealed the absence of a mitogen-induced foreign body reaction, even when the purified material (after cross-linking with Ba2+ ions) is implanted into animal models with elevated macrophage activity (diabetes-prone BB/OK rat). Thus, alginate capsules with high mannuronic acid content become available for applications such as implantation. In addition to the utilization as implantable cell reactors in therapy and biotechnology, these purified algins have broad application potential as ocular fillings, tissue replacements, microencapsulated growth factors and/or interleukins or slow-release dosage forms of antibodies, surface coatings of sensors and other invasive medical devices, and in encapsulation of genetically engineered cells for gene therapy.

Long-term in vivo performance and biocompatibility of poly(vinyl alcohol) hydrogel macrocapsules for hybrid-type artificial pancreas

A bag-shaped macrocapsule suitable for Langerhans islets entrapment and immunoisolation was constructed using a semipermeable hydrogel membrane of poly(vinyl alcohol)(PVA) cross-linked chemically and sterilized by a radiation method. Empty (not seeded with Langerhans islets), sealed, sterile macrocapsules were implanted into the intraperitoneal cavity of adult female Buffalo rats for periods of up to 6.5 months. Long-term in vivo performance of the macrocapsule membrane was evaluated on the basis of the permeability measurements of glucose and albumin. The results of experiments revealed the progressive, disadvantageous alterations of the PVA hydrogel membrane resulting in a decrease in the permeability of solutes. Histochemical examinations of the cellular enzyme activities in the implant-encapsulating tissue, regarding the acid and alkaline phosphatases, were performed to evaluate the activity of cells involved in the inflammatory response to the long-term macrocapsule implantation.

Expression of the bcl-2 gene from a defective HSV-1 amplicon vector protects pancreatic beta-cells from apoptosis

It has been suggested that the mechanism of pancreatic beta-cell death in autoimmune diabetes mellitus and in immunoisolated transplantation devices involves cytokine-induced apoptosis. To explore the feasibility of a gene transfer strategy to protect beta-cells, we evaluated the use of replication defective HSV-1 amplicon vectors as gene transfer vehicles. Post-mitotic murine and human beta-cells were efficiently transduced by a herpes simplex virus (HSV) vector that expresses the reporting gene Escherichia coli lacZ under the transcriptional control of a HSV promoter (HSVlac) both as islets and as single cells. Insulin secretion, a marker of beta-cell function, was unaffected by HSVlac transduction of a beta-cell line. A HSV amplicon vector that expressed bcl-2 (HSVbcl2) in beta-cells was constructed, and its effects on cytokine-mediated apoptosis in both a beta-cell line and primary murine beta-cells assessed by measuring internucleosomal fragmentation. beta-Cell apoptosis was blocked by transduction with HSVbcl2 but not HSVlac. The prevention of cytokine-induced apoptosis in beta-cells by bcl-2 expression has the potential both to ameliorate primary autoimmune beta-cell destruction as type I diabetes develops, and to prevent the destruction of transplanted beta-cells inside immunoisolation devices.

Antidiabetic plants and their active constituents

Diabetes mellitus is a debilitating and often life-threatening disease with increasing incidence in rural populations throughout the world. A scientific investigation of traditional herbal remedies for diabetes may provide valuable leads for the development of alternative drugs and therapeutic strategies. Alternatives are clearly needed because of the inability of current therapies to control all of the pathological aspects of diabetes, and the high cost and poor availability of current therapies for many rural populations, particularly in developing countries. This review provides information on more than 1200 species of plants reported to have been used to treat diabetes and/or investigated for antidiabetic activity, with a detailed review of representative plants and some of great diversity of plant constituents with hypoglycemic activity, their mechanisms of action, methods for the bioassay of hypoglycemic agents, potential toxicity problems, and promising directions for future research on antidiabetic plants. The objective of this work is to provide a starting point for programs leading to the development of indigenous botanical resources as inexpensive sources for standardized crude or purified antidiabetic drugs, and for the discovery of lead compounds for novel hypoglycemic drug development.