Fine structure of the glomerular basement membrane of the rat kidney visualized by high-resolution scanning electron microscopy

The basement membrane as a structured surface - role in vascular health and disease

The basement membrane (BM) is a thin specialized extracellular matrix that functions as a cellular anchorage site, a physical barrier and a signaling hub. While the literature on the biochemical composition and biological activity of the BM is extensive, the central importance of the physical properties of the BM, most notably its mechanical stiffness and topographical features, in regulating cellular function has only recently been recognized. In this Review, we focus on the biophysical attributes of the BM and their influence on cellular behavior. After a brief overview of the biochemical composition, assembly and function of the BM, we describe the mechanical properties and topographical structure of various BMs. We then focus specifically on the vascular BM as a nano- and micro-scale structured surface and review how its architecture can modulate endothelial cell structure and function. Finally, we discuss the pathological ramifications of the biophysical properties of the vascular BM and highlight the potential of mimicking BM topography to improve the design of implantable endovascular devices and advance the burgeoning field of vascular tissue engineering.

Towards bio-compatible magnetic nanoparticles: Immune-related effects, in-vitro internalization, and in-vivo bio-distribution of zwitterionic ferrite nanoparticles with unexpected renal clearance

HYPOTHESIS

Iron oxide and other ferrite nanoparticles have not yet found widespread application in the medical field since the translation process faces several big hurdles. The incomplete knowledge of the interactions between nanoparticles and living organisms is an unfavorable factor. This complex subject should be made simpler by synthesizing magnetic nanoparticles with good physical (relaxivity) and chemical (colloidal stability, anti-fouling) properties and no biological activity (no immune-related effects, minimal internalization, fast clearance). Such an innocent scaffold is the main aim of the present paper. We systematically searched for it within the class of small-to-medium size ferrite nanoparticles coated by small (zwitter)ionic ligands. Once established, it can be functionalized to achieve targeting, drug delivery, etc. and the observed biological effects will be traced back to the functional molecules only, as the nanosized scaffold is innocent.

EXPERIMENTS

We synthesized nine types of magnetic nanoparticles by systematic variation of core composition, size, coating. We investigated their physico-chemical properties and interaction with serum proteins, phagocytic microglial cells, and a human model of inflammation and studied their biodistribution and clearance in healthy mice. The nanoparticles have good magnetic properties and their surface charge is determined by the preferential adsorption of anions. All nanoparticle types can be considered as immunologically safe, an indispensable pre-requisite for medical applications in humans. All but one type display low internalization by microglial BV2 cells, a process strongly affected by the nanoparticle size. Both small (3 nm) and medium size (11 nm) zwitterionic nanoparticles are in part captured by the mononuclear phagocyte system (liver and spleen) and in part rapidly (≈1 h) excreted through the urinary system of mice.

FINDINGS

The latter result questions the universality of the accepted size threshold for the renal clearance of nanoparticles (5.5 nm). We suggest that it depends on the nature of the circulating particles. Renal filterability of medium-size magnetic nanoparticles is appealing because they share with small nanoparticles the decreased accumulation-related toxicity while performing better as magnetic diagnostic/therapeutic agents thanks to their larger magnetic moment. In conclusion, many of our nanoparticle types are a bio-compatible innocent scaffold with unexpectedly favorable clearance.

Engineering topography: Effects on corneal cell behavior and integration into corneal tissue engineering

Cell-material interactions are important to tissue engineering. Inspired by the natural topographic structures on the extracellular matrix, a growing number of studies have integrated engineering topography into investigations of cell behavior on biomaterials. Engineering topography has a significant influence on cell behaviors. These cell-topography interactions play an important role in regenerative medicine and tissue engineering. Similarly, cell-topography interactions are important to corneal reconstruction and regeneration. In this review, we primarily summarized the effects of topographic cues on the behaviors of corneal cells, including cell morphology, adhesion, migration, and proliferation. Furthermore, the integration of engineering surface topography into corneal tissue engineering was also discussed.

Engineered phage nanofibers induce angiogenesis

Herein, we exploited a bioinspired M13 bacteriophage as an angiogenic nanofiber for soft tissue engineering applications. We demonstrated that engineered phage nanofibers induce angiogenesis with specific biochemical and topological cues. Specifically, nanofibrous phage structures provided a novel therapeutic platform for stem cell technologies in ischemic diseases.

Tissue engineering toward organ-specific regeneration and disease modeling

Tissue engineering has been recognized as a translational approach to replace damaged tissue or whole organs. Engineering tissue, however, faces an outstanding knowledge gap in the challenge to fully recapitulate complex organ-specific features. Major components, such as cells, matrix, and architecture, must each be carefully controlled to engineer tissue-specific structure and function that mimics what is found in vivo. Here we review different methods to engineer tissue, and discuss critical challenges in recapitulating the unique features and functional units in four major organs-the kidney, liver, heart, and lung, which are also the top four candidates for organ transplantation in the USA. We highlight advances in tissue engineering approaches to enable the regeneration of complex tissue and organ substitutes, and provide tissue-specific models for drug testing and disease modeling. We discuss the current challenges and future perspectives toward engineering human tissue models.

Biophysical Regulation of Cell Behavior-Cross Talk between Substrate Stiffness and Nanotopography

The stiffness and nanotopographical characteristics of the extracellular matrix (ECM) influence numerous developmental, physiological, and pathological processes in vivo. These biophysical cues have therefore been applied to modulate almost all aspects of cell behavior, from cell adhesion and spreading to proliferation and differentiation. Delineation of the biophysical modulation of cell behavior is critical to the rational design of new biomaterials, implants, and medical devices. The effects of stiffness and topographical cues on cell behavior have previously been reviewed, respectively; however, the interwoven effects of stiffness and nanotopographical cues on cell behavior have not been well described, despite similarities in phenotypic manifestations. Herein, we first review the effects of substrate stiffness and nanotopography on cell behavior, and then focus on intracellular transmission of the biophysical signals from integrins to nucleus. Attempts are made to connect extracellular regulation of cell behavior with the biophysical cues. We then discuss the challenges in dissecting the biophysical regulation of cell behavior and in translating the mechanistic understanding of these cues to tissue engineering and regenerative medicine.

A nanoporous surface is essential for glomerular podocyte differentiation in three-dimensional culture

Although it is well recognized that cell–matrix interactions are based on both molecular and geometrical characteristics, the relationship between specific cell types and the three-dimensional morphology of the surface to which they are attached is poorly understood. This is particularly true for glomerular podocytes – the gatekeepers of glomerular filtration – which completely enwrap the glomerular basement membrane with their primary and secondary ramifications. Nanotechnologies produce biocompatible materials which offer the possibility to build substrates which differ only by topology in order to mimic the spatial organization of diverse basement membranes. With this in mind, we produced and utilized rough and porous surfaces obtained from silicon to analyze the behavior of two diverse ramified cells: glomerular podocytes and a neuronal cell line used as a control. Proper differentiation and development of ramifications of both cell types was largely influenced by topographical characteristics. Confirming previous data, the neuronal cell line acquired features of maturation on rough nanosurfaces. In contrast, podocytes developed and matured preferentially on nanoporous surfaces provided with grooves, as shown by the organization of the actin cytoskeleton stress fibers and the proper development of vinculin-positive focal adhesions. On the basis of these findings, we suggest that in vitro studies regarding podocyte attachment to the glomerular basement membrane should take into account the geometrical properties of the surface on which the tests are conducted because physiological cellular activity depends on the three-dimensional microenvironment.

Nanotopographical Modulation of Cell Function through Nuclear Deformation

Although nanotopography has been shown to be a potent modulator of cell behavior, it is unclear how the nanotopographical cue, through focal adhesions, affects the nucleus, eventually influencing cell phenotype and function. Thus, current methods to apply nanotopography to regulate cell behavior are basically empirical. We, herein, engineered nanotopographies of various shapes (gratings and pillars) and dimensions (feature size, spacing and height), and thoroughly investigated cell spreading, focal adhesion organization and nuclear deformation of human primary fibroblasts as the model cell grown on the nanotopographies. We examined the correlation between nuclear deformation and cell functions such as cell proliferation, transfection and extracellular matrix protein type I collagen production. It was found that the nanoscale gratings and pillars could facilitate focal adhesion elongation by providing anchoring sites, and the nanogratings could orient focal adhesions and nuclei along the nanograting direction, depending on not only the feature size but also the spacing of the nanogratings. Compared with continuous nanogratings, discrete nanopillars tended to disrupt the formation and growth of focal adhesions and thus had less profound effects on nuclear deformation. Notably, nuclear volume could be effectively modulated by the height of nanotopography. Further, we demonstrated that cell proliferation, transfection, and type I collagen production were strongly associated with the nuclear volume, indicating that the nucleus serves as a critical mechanosensor for cell regulation. Our study delineated the relationships between focal adhesions, nucleus and cell function and highlighted that the nanotopography could regulate cell phenotype and function by modulating nuclear deformation. This study provides insight into the rational design of nanotopography for new biomaterials and the cell-substrate interfaces of implants and medical devices.

The basement membrane of the isolated rat colonic mucosa. A light, electron and atomic force microscopy study

Basement membranes (BM) are structures of the extracellular matrix (ECM), which are involved in epithelial barriers, but also play an important role in processes such as cell adhesion, cell growth and tissue healing. The aim of this study was to investigate possible effects of cell removal on the structure of the BM of the colonic mucosa. The superficial epithelium was removed with EDTA and the samples were then mechanically fixed for immunohistochemistry, TEM, SEM and AFM. For SEM and AFM, some samples were also prepared according to the OTO method. BM marker proteins were detected after cell removal by immunohistochemistry, indicating that BM remains. However, a lamina lucida (LL) was no longer visible in TEM, it disappeared and the BM became slightly thinner. The surface topography of the BM is characterized by the presence of globules, fenestrations and pore-like structures, which were visualized with SEM and AFM. Noteworthy is the visualization for the first time with AFM of a 3D network of fine fibers and filaments ("cords"), which very much resembled that described with TEM by Inoue (1994). An unresolved question is whether the pore-like structures observed in this study, especially with SEM, actually correspond to the pores of the BM whose existence has been demonstrated functionally. In conclusion, the structural patterns and changes described could be considered as a reference to evaluate the effects of other decellularization protocols on BMs, such as those used in tissue engineering.

A model of strain-dependent glomerular basement membrane maintenance and its potential ramifications in health and disease

A model is developed and analyzed for type IV collagen turnover in the kidney glomerular basement membrane (GBM), which is the primary structural element in the glomerular capillary wall. The model incorporates strain dependence in both deposition and removal of the GBM, leading to an equilibrium tissue strain at which deposition and removal are balanced. The GBM thickening decreases tissue strain per unit of transcapillary pressure drop according to the law of Laplace, but increases the transcapillary pressure drop required to maintain glomerular filtration. The model results are in agreement with the observed GBM alterations in Alport syndrome and thin basement membrane disease, and the model-predicted linear relation between the inverse capillary radius and inverse capillary thickness at equilibrium is consistent with published data on different mammals. In addition, the model predicts a minimum achievable strain in the GBM based on the geometry, properties, and mechanical environment; that is, an infinitely thick GBM would still experience a finite strain. Although the model assumptions would be invalid for an extremely thick GBM, the minimum achievable strain could be significant in diseases, such as Alport syndrome, characterized by focal GBM thickening. Finally, an examination of reasonable values for the model parameters suggests that the oncotic pressure drop-the osmotic pressure difference between the plasma and the filtrate due to large molecules-plays an important role in setting the GBM strain and, thus, leakage of protein into the urine may be protective against some GBM damage.

Nanoscale surfacing for regenerative medicine

Cells in most tissues reside in microenvironment surrounded with specific three-dimensional features. The extracellular matrix or substratum with which cells interact often includes topography at the nanoscale. For example, the basement membrane of many tissues displays features of pores, fibers and ridges in the nanometer range. The nanoscale topography has significant effects on cellular behavior. Knowledge of the cell-substratum interactions is crucial to the understanding of many fundamental biological questions and to regenerative medicine. Rapid advances in nanotechnology enable cellular study on engineered nanoscale surfaces. Recent findings underscore the phenomenon that mammalian cells do respond to nanosized features on a synthetic surface. This review covers the commonly used techniques of engineering nanoscale surface and the techniques which have not been adapted but are of great potential in regenerative medicine, surveys the applications of nanoscale surface in regenerative medicine including vascular, bone, neural and stem cell tissue engineering, and discusses the possible mechanisms of cellular responses to nanoscale surface. A better understanding of the interactions between cells and nanoscale surfacing will help advance the field of regenerative medicine.

The ability of corneal epithelial cells to recognize high aspect ratio nanostructures

The basement membrane of the human corneal epithelium comprises topographic features including fibers, pores, and elevations with feature dimensions on the order of 20-400 nm. Understanding the impact of sub-micron and nanotopography on corneal cell behavior will contribute to our understanding of biomechanical cues and will assist in the design of improved synthetic corneal implants. We utilized well defined ridge and groove wave-like nanostructures (wave ordered structures, WOS) of 60-140 pitches (30-70 nm ridge widths) and 200 nm depths to assess human corneal epithelial cell (HCEC) contact guidance and to establish HCEC contact acuity defined as the lower limit in feature dimensions at which cells respond to biomimetic topographic cues. Results using the WOS substrates demonstrate that HCEC contact acuity is in the range of 60 nm pitch for cells in a serum-free basal medium (EpiLife) and in the range of 90 nm pitch for cells in epithelial medium. To further investigate the influence of HCEC contact acuity in the presence of larger topographic cues, we fabricated 70 nm pitch WOS-overlaid parallel to the top of the ridges of 800-4000 nm pitch. HCEC cultured in epithelial medium demonstrate a significant increase in the percent of cells aligning to 4000 nm pitch topography with WOS-overlay compared to controls (both flat and 70 nm WOS alone) and 4000 nm pitch topography alone. These results highlight the significance of the lower range of basement membrane scale topographic cues on cell response and allow for improved prosthetic design.

Cell adhesion properties on photochemically functionalized diamond

The biocompatibility of diamond was investigated with a view toward correlating surface chemistry and topography with cellular adhesion and growth. The adhesion properties of normal human dermal fibroblast (NHDF) cells on microcrystalline and ultrananocrystalline diamond (UNCD) surfaces were measured using atomic force microscopy. Cell adhesion forces increased by several times on the hydrogenated diamond surfaces after UV irradiation of the surfaces in air or after functionalization with undecylenic acid. A direct correlation between initial cell adhesion forces and the subsequent cell growth was observed. Cell adhesion forces were observed to be strongest on UV-treated UNCD, and cell growth experiments showed that UNCD was intrinsically more biocompatible than microcrystalline diamond surfaces. The surface carboxylic acid groups on the functionalized diamond surface provide tethering sites for laminin to support the growth of neuron cells. Finally, using capillary injection, a surface gradient of polyethylene glycol could be assembled on top of the diamond surface for the construction of a cell gradient.

Human foetal osteoblastic cell response to polymer-demixed nanotopographic interfaces

Nanoscale cell-substratum interactions are of significant interest in various biomedical applications. We investigated human foetal osteoblastic cell response to randomly distributed nanoisland topography with varying heights (11, 38 and 85 nm) produced by a polystyrene (PS)/polybromostyrene polymer-demixing technique. Cells displayed island-conforming lamellipodia spreading, and filopodia projections appeared to play a role in sensing the nanotopography. Cells cultured on 11 nm high islands displayed significantly enhanced cell spreading and larger cell dimensions than cells on larger nanoislands or flat PS control, on which cells often displayed a stellate shape. Development of signal transmitting structures such as focal adhesive vinculin protein and cytoskeletal actin stress fibres was more pronounced, as was their colocalization, in cells cultured on smaller nanoisland surfaces. Cell adhesion and proliferation were greater with decreasing island height. Alkaline phosphatase (AP) activity, an early stage marker of bone cell differentiation, also exhibited nanotopography dependence, i.e. higher AP activity on 11 nm islands compared with that on larger islands or flat PS. Therefore, randomly distributed island topography with varying nanoscale heights not only affect adhesion-related cell behaviour but also bone cell phenotype. Our results suggest that modulation of nanoscale topography may be exploited to control cell function at cell-biomaterial interfaces.

Osteoblast Adhesion on Poly(l-lactic Acid)/Polystyrene Demixed Thin Film Blends: Effect of Nanotopography, Surface Chemistry, and Wettability

Biomaterial surface characteristics are critical cues that regulate cell function. We produced a novel series of poly(l-lactic acid) (PLLA) and polystyrene demixed nanotopographic films to provide nonbiological cell-stimulating cues. The increase in PLLA weight fraction (phi) in blend solutions resulted in topography changes in spin-cast films from pit-dominant to island-dominant morphologies having nanoscale depth or height (3-29 nm). Lower molecular weight PLLA segregated to the top surface of demixed films, as observed by X-ray photoelectron spectroscopy and secondary ion mass spectroscopy (SIMS). For phi > or = 0.5, the topmost film layer was predominantly filled with PLLA (>96% by SIMS at 20-A depth). Nanotextured substrata stimulated osteoblastic cell adhesion to a greater degree than did flat PLLA (phi = 1), and this effect was more pronounced for nanoisland (phi = 0.7 and 0.9) relative to nanopit topographies (phi = 0.5). Demixed films having relatively lower water contact angles generally enhanced cell adhesion and spreading. Our results reveal that cell adhesion is affected by surface chemistry, topography, and wettability simultaneously and that nanotextured surfaces may be utilized in regulating cell adhesion.

Fibroblast adhesion to micro- and nano-heterogeneous topography using diblock copolymers and homopolymers

Polymeric substrates of different surface chemistry and length scales were found to have profound influence on cell adhesion. The adhesion of fibroblasts on surfaces of oxidized polystyrene (PS), on surfaces modified with random copolymers of PS and poly(methyl methacrylate) [P(S-r-MMA)] with topographic features, and chemically patterned surfaces that varied in lateral length scales from nanometers to microns were studied. Surfaces with heterogeneous topographies were generated from thin film mixtures of a block copolymer, PS-b-MMA, with homopolymers of PS and PMMA. The two homopolymers macroscopically phase separated and, with the addition of diblock copolymer, the size scales of the phases decreased to nanometer dimensions. Cell spreading area analysis showed that a thin film of oxidized PS surface promoted adhesion whereas a thin film of P(S-r-MMA) surface did not. Fibroblast adhesion was examined on surfaces in which the lateral length scale varied from 60 nm to 6 microm. It was found that, as the lateral length scale between the oxidized PS surfaces decreased, cell spreading area and degree of actin stress fiber formation increased. In addition, scanning electron microscopy was used to evaluate the location of filopodia and lamellipodia. It was found that most of the filopodia and lamellipodia interacted with the oxidized PS surfaces. This can be attributed to both chemical and topographic surface interactions that prevent cells from interacting with the P(S-r-MMA) at the base of the topographic features.

Epithelial contact guidance on well-defined micro- and nanostructured substrates

The human corneal basement membrane has a rich felt-like surface topography with feature dimensions between 20 nm and 200 nm. On the basis of these findings, we designed lithographically defined substrates to investigate whether nanotopography is a relevant stimulus for human corneal epithelial cells. We found that cells elongated and aligned along patterns of grooves and ridges with feature dimensions as small as 70 nm, whereas on smooth substrates, cells were mostly round. The percentage of aligned cells was constant on substrate tomographies with lateral dimensions ranging from the nano- to the micronscale, and increased with groove depth. The presence of serum in the culture medium resulted in a larger percentage of cells aligning along the topographic patterns than when no serum was added to the basal medium. When present, actin microfilaments and focal adhesions were aligned along the substrate topographies. The width of the focal adhesions was determined by the width of the ridges in the underlying substrate. This work documents that biologic length-scale topographic features that model features encountered in the native basement membrane can profoundly affect epithelial cell behavior.

Nanoscale topography of the corneal epithelial basement membrane and Descemet's membrane of the human

PURPOSE

Quantitatively define and compare the nanoscale topography of the corneal epithelial basement membrane (anterior basement membrane) and Descemet's membrane (posterior basement membrane) of the human.

METHODS

Human corneas not suitable for transplantation were obtained from the Wisconsin Eye Bank. The corneas were placed in 2.5 mM EDTA for 2.5 h or 30 min. for removal of the epithelium or endothelium, respectively. After removal of the overlying cells, specimens were fixed in 2% glutaraldehyde and either examined in this state by atomic force microscopy only or dehydrated through an ethanol series and prepared for transmission electron microscopy (TEM), scanning electron microscopy (SEM), and atomic force microscopy (AFM).

RESULTS

The subepithelial and subendothelial basement membrane surfaces have a similar appearance that consists of an interwoven meshwork of fibers and pores. Topographic feature sizes were found to be in the nanometer size range with the epithelial basement membrane features larger and less densely packed than Descemet's membrane features. The topographic features are fractile in nature and increase surface area for cell contact.

CONCLUSION

With the use of the TEM, SEM, and AFM, a detailed description of the surface topography of corneal epithelial basement membrane and Descemet's membrane of the human cornea are provided. The significance of differences in corneal basement membrane topography may reflect differences in function of the overlying cells or may be related to differences in cell migration and turnover patterns between the epithelium and endothelium.

Nature of glomerular dysfunction in pre-eclampsia

BACKGROUND

Pre-eclampsia is characterized by hypertension, proteinuria and edema. Simultaneous studies of kidney function and structure have not been reported. We wished to explore the degree and nature of glomerular dysfunction in pre-eclampsia.

METHODS

Physiologic techniques were used to estimate glomerular filtration rate (GFR), renal plasma flow and afferent oncotic pressure immediately after delivery in consecutive patients with pre-eclampsia (PET; N = 13). Healthy mothers completing an uncomplicated pregnancy served as functional controls (N = 12). A morphometric analysis of glomeruli obtained by biopsy and mathematical modeling were used to estimate the glomerular ultrafiltration coefficient (Kf). Glomeruli from healthy female kidney transplant donors served as structural controls (N = 8).

RESULTS

The GFR in PET was depressed below the control level, 91 +/- 23 versus 149 +/- 34 ml/min/1.73 m2, respectively (P < 0.0001). In contrast, renal plasma flow and oncotic pressure were similar in the two groups (P = NS). A reduction in the density and size of endothelial fenestrae and subendothelial accumulation of fibrinoid deposits lowered glomerular hydraulic permeability in PET compared to controls, 1.81 versus 2.58 x 10(-9) m/sec/PA. Mesangial cell interposition also curtailed effective filtration surface area. Together, these changes lowered the computed single nephron Kf in PET below control, 4.26 versus 6.78 nl/min x mm Hg, respectively.

CONCLUSION

The proportionate (approximately 40%) depression of Kf for single nephrons and GFR suggests that hypofiltration in PET does not have a hemodynamic basis, but is a consequence of structural changes that lead to impairment of intrinsic glomerular ultrafiltration capacity.

Scanning electron microscopic study of the renal glomerulus by an in vivo cryotechnique combined with freeze-substitution

The 3-dimensional ultrastructure of mouse renal glomeruli under normal haemodynamic conditions was studied by scanning electron microscopy using an in vivo cryotechnique followed by freeze-substitution, and compared with glomeruli prepared by conventional fixation methods. Mouse kidneys were frozen with a cryoknife apparatus and a liquid isopentane-propane mixture (-193 degrees C). Surface areas of the frozen tissues were freeze-fractured with a scalpel in liquid nitrogen. The specimens were routinely freeze-substituted, freeze-dried, ion-sputtered, and then observed in a scanning electron microscope at an accelerating voltage of 5 kV. Renal glomeruli showed good ultrastructural preservation of the surface tissues. Podocytes with interdigitating foot processes covering capillary loops exhibited smooth surface contours and their cell surfaces were arranged more tightly than those seen by the conventional fixation method. Filtration slits between foot processes were found to be narrow. The internal structure of the glomerular tuft was seen in the freeze-fracture faces. The capillary lumen with variously shaped erythrocytes was kept open in frozen glomeruli under normal blood circulation conditions. The ultrastructure of renal glomeruli, as revealed by the in vivo cryotechnique with freeze-substitution, appears to be closer to that of the living state.

Morphogenesis of the glomerular filter: the synchronous assembly and maturation of two distinct extracellular matrices

The morphogenesis of the glomerular filtration apparatus during pre- and postnatal development in the rodent involves the coordinated assembly of two closely apposed but morphologically different extracellular matrices, the glomerular capillary basement membrane and the mesangial matrix. The cellular origin of these matrices is known to be distinct and complex; however, the mechanisms by which these matrices are assembled during morphogenesis are not entirely understood. It has been shown that in the earliest stages of glomerular morphogenesis the nascent glomerular basement membrane exists as a four-layered structure, the product of both the visceral epithelium and capillary endothelium. During the latter stages of glomerular development, the quadrilaminar structure becomes a trilaminar basement membrane, the event thought to occur by fusion of closely apposed basement membrane layers. In subsequent stages of maturation and throughout the life of the animal, the visceral epithelial cells, which line the periphery of the glomerular capillary, are the primary source of newly synthesized basement membrane material. The mesangial matrix, which lacks the specific organization of a basement membrane, first occurs in the developing glomerulus as a diffuse matrix central to the developing glomerular capillaries. During glomerular maturation the mesangial matrix undergoes a compaction/arborization coincident with the ramification of the vascular histoarchitecture of the glomerular tuft. Recent advances in the cell biology of basement membrane now demonstrate that there is a divergence in isoforms of the molecules that comprise the glomerular capillary basement membrane and mesangial matrices during development, possibly coincidental with functional specialization during the process of glomerular maturation.

Re-evaluation of foot process effacement in acute puromycin aminonucleoside nephrosis

The sequence of morphological changes during foot process effacement in acute puromycin aminonucleoside (PAN) nephrosis was examined by means of NaOH maceration and freeze cracking for scanning electron microscopy (SEM). The micrographs of SEM and those of transmission electron microscopy (TEM) were quantitatively analyzed by computerized morphometry, and were correlated with renal function. On day 2 after PAN injection, the slit length was moderately decreased by both shortening and degradation of the foot processes. On day 4, membrane-bounded vesicles were scattered in the lamina rara externa. During foot process effacement, the basal surface of podocytes developed palm-like domains that represented the cytoplasmic areas between interdigitation. The decrease in the length of podocyte cell borders paralleled the decrease of 24-hour creatinine clearance. The development of the palm-like domains on the basal aspects of podocytes estimated by distance class analysis was closely correlated with the sudden onset of proteinuria. We conclude that foot process effacement in PAN nephrosis caused by the retraction and degradation of foot processes leads to the development of palm-like domains, which is correlated with podocyte detachment as well as massive proteinuria.

Ultrastructural change of the glomerular basement membrane in rats with Heymann nephritis revealed by ultrahigh resolution scanning electron microscopy

To assess the relationship between the glomerular injury induced by immune complex deposition and proteinuria, ultrastructural changes of the glomerular basement membrane (GBM) were investigated in Heymann nephritis. Active Heymann nephritis was induced in rats by injecting them with tubular brush border antigen, known as Fx1A, emulsified in complete Freund's adjuvant (CFA). Measurement of urinary protein excretion and histological examinations were carried out for up to 15 weeks after immunization. Proteinuria developed in rats within 10 weeks of immunization and coincided with the development of subepithelial deposits with minimal spike-like basement membrane protrusion. Acellular glomeruli were prepared by detergent treatment and were subjected to tannic acid-osmium conductive staining prior to examination with an ultrahigh resolution scanning electron microscope (HSEM). HSEM of the acellular GBM prepared from control rats injected with CFA alone revealed a meshwork structure, with pores of about 9 nm in diameter. Proteinuric rats immunized with Fx1A showed a loosened meshwork structure, with pores of about 15 nm in the acellular GBM adjacent to the deposits. The newly formed GBM overlying the deposit consisted of a meshwork structure associated with unorganized thin fibrils. Ultrastructural changes were never seen in GBM devoid of deposits. These findings indicate that subepithelial deposits are closely involved in the development of proteinuria by injuring the size selectivity of the GBM.

Ultrastructure of nonenzymatically glycated mesangial matrix in diabetic nephropathy

Advanced protein glycation has been proposed as a major factor in the development of diabetic nephropathy. Advanced glycation end products (AGEs) have altered the structure of extracellular matrix component and impaired self association in vitro. To elucidate the role of AGEs in the progression of diabetic nephropathy, the present study was undertaken to localize glomerular AGEs immunohistochemically. Ultrastructural changes of the mesangial matrix were analyzed with high resolution scanning electron microscopy. No glomerular AGEs staining was noted in normal control kidney specimens, or in tissue from glomerulonephritis patients without diabetes mellitus. The mesangium showed a positive AGEs staining in advanced stages of diabetic nephropathy, and the most characteristic finding was the strong AGEs staining in nodular lesions. By high resolution scanning electron microscopy, control and diabetic mesangial matrices revealed a meshwork structure composed of fine fibrils (10 nm in width) and numerous pores (12 to 13 nm in diameter). In the nodular lesions, however, loosening of the meshwork was significant, and the diameter of the pores was enlarged (approximately 24 nm). This study provides the first immunohistochemical evidence that AGEs are localized in diabetic glomeruli, most notably to nodular lesions. Advanced glycation might play a role in the progression of diabetic nephropathy through impairment of the assembly of matrix proteins in vivo.

Quick-freeze, deep-etch studies of renal basement membranes

The fine structure of the renal (i.e., glomerular, tubular, and capillary) basement membranes was re-evaluated with the aid of a deep-etch replica method. The structure of the laminae rarae interna and externa of the rat glomerular basement membrane (GBM) and laminae lucida of other basement membranes were basically identical in that 6 to 8 nm fibrils were interconnected to form a three-dimensional, polygonal network. By contrast, all of the laminae densa examined were composed of closely packed granules, and a filamentous substructure was identified only in a limited area. These granular components were demonstrated to be an integral component of the lamina densa. From additional observations on the trypsinized bovine GBM, it appeared that the basic structure of renal basement membranes was almost identical, namely, that a three-dimensional fibrillar meshwork existed throughout the individual layers to form a structural framework upon which fine particles were variably attached. In addition, we observed some of the fine structure of the pars fibroreticularis; the laminae densa of the tubular and capillary basement membranes continued to the fibrillar meshwork resembling the structural backbone of the glomerular basement membrane. The network was sometimes directly connected to the extracellular matrix, but more often changed into a rough fibrillar framework and connected to the extracellular matrix.

Basic structure of basement membranes is a fine network of "cords," irregular anastomosing strands

A three-dimensional network of irregular anastomosing strands, referred to as "cords," was found to be the main component of the lamina densa of a) common, "thin" basement membranes in tissues from diverse origins including foot pad epidermis, trachea, jejunum, seminiferous tubule and vas deferens of the rat, monkey seminiferous tubule, and mouse ciliary process, b) a "double" basement membrane, the rat glomerular basement membrane, and c) "thick" basement membranes including rat Reichert's membrane, mouse lens capsule and the Engelbreth-Holm-Swarm (EHS) tumor matrix. The average thickness of the cords was 3.2-4.8 nm, 4 nm, and 4.7-5 nm, respectively, in these three types of basement membranes. The mean diameter of the intercordal spaces, or openings of the network, averaged 14 nm with a range from 8 nm in the glomerular basement membrane to 21.9 nm in the lens capsule. After cryofixation followed by freeze substitution or freeze drying, similar cord networks were observed in all basement membranes examined which included two thin basement membranes, that of the rat epididymis and seminiferous tubules, and three thick basement membranes, that is, the lens capsule and the EHS tumor matrix of the mouse, and rat Reichert's membrane. In addition, following the co-incubation of laminin, type IV collagen and heparan sulfate proteoglycan at 35 degrees C, a precipitate was formed which was found to contain lamina densa-like sheets and large semisolid masses. Both types of structures were found to be made up of a network of 3 nm wide cords, which resembled that of natural basement membranes. With the immunoperoxidase technique, these cords were stained for major basement membrane components including laminin, type IV collagen, heparan sulfate proteoglycan, entactin, and fibronectin. Ribbon-like "double tracks" 4.5 nm in width and being distributed along cords have been identified as the form taken by heparan sulfate proteoglycan in basement membranes. Following mild plasmin treatment, most of the cord components were digested away leaving behind a network of fine filaments found to contain type IV collagen. Each cord, therefore, is organized by a type IV collagen core filament which is surrounded by a plasmin-sensitive sheath containing other basement membrane components. Two types of minor structural components, that is, 7-10 nm wide straight "basotubules" and 3.5 nm wide particulate structures referred to as "pentosomes" were associated with cord network in some basement membranes.(ABSTRACT TRUNCATED AT 400 WORDS)

Nonenzymatic glycosylation-induced modifications of intact bovine kidney tubular basement membrane

We examined structural changes in bovine kidney tubular basement membrane (TBM) following in vitro nonenzymatic glycosylation (NEG). Isolated TBM was incubated for 2 wk at 37 degrees C in the absence of sugar or in the presence of either glucose or ribitol under conditions that minimized degradation and oxidative damage. NEG and crosslink formation in glycated TBM were confirmed by decreased solubility, increased amounts of low mobility material by SDS-PAGE, and increased specific fluorescence compared to controls. Morphological analysis using high resolution, low voltage scanning electron microscopy (LV-SEM) revealed a complex three-dimensional meshwork of interconnecting strands with intervening openings. Glycated TBM underwent distinct morphological changes, including a 58% increase in the amount of image surface area occupied by openings. This was due to an apparent increase in the number of large openings (diameters > 12.5 nm), whereas the number of small openings (diameters < 12.5 nm) remained unchanged. These findings corroborate earlier physiological studies, which established that the loss of glomerular permselectivity seen in patients with diabetic nephropathy is due to the formation of large pores in the kidney filtration barrier of which the BM is a major component. We conclude that NEG and crosslink formation among BM components lead to modifications of BM ultrastructure, which could play a role in loss of barrier function in diabetic microangiopathy and nephropathy.

Ultrastructural changes in glomerular epithelial cells in acute puromycin aminonucleoside nephrosis: a study by high-resolution scanning electron microscopy

Ultrastructural changes in the podocytes were studied during the development of, and recovery from, acute puromycin aminonucleoside (PAN) nephrosis using high-resolution scanning electron microscopy (hrSEM) and transmission electron microscopy (TEM). In the process of development of PAN nephrosis, four types of early structural changes were observed before total loss of foot processes: formation of cytoplasmic blebs, masking of filtration clefts, flattening of foot processes, and retraction of foot processes. The masking of filtration clefts visualized by hrSEM corresponded to the multiplication of slit diaphragms and adhesion of foot processes in the TEM findings, and preceded retraction of the foot processes. Changes of podocyte configuration were produced. Recovery from this change of podocyte configuration began as islands of podocyte interdigitation, and was proceeded by expansion of the islands. During recovery, the primary processes were re-established either by retraction or perforation of the thin cytoplasm after the formation of foot processes. We conclude that loss of foot processes begins with the masking of filtration clefts. Recovery from the change in podocyte configuration begins with the formation of new foot processes.

Renal basement membranes by ultrahigh resolution scanning electron microscopy

Three-dimensional ultrastructures of basement membranes of the rat kidney were investigated with an ultrahigh resolution scanning electron microscope (HSEM) equipped with a resolving power of 0.5 nm. All cellular components were extracted from renal cortical tissues by sequential-detergent treatment. Four types of acellular basement membranes were observed after tannin-osmium conductive staining: the glomerular basement membrane (GBM) associated with the mesangial matrix, the tubular basement membrane (TBM), the Bowman's capsule basement membrane (BCBM), and the peritubular capillary basement membrane (PTCBM). We could demonstrate the polygonal meshwork structures composed of strands in the respective basement membranes. The strands averaged 6 to 7 nm wide, whereas the pore sizes within the meshworks were variable and differed according to the basement membrane type. Moreover, we confirmed the presence of the heterogeneity of the GBM suggested by several approaches. Present data support the proposition that a polygonal meshwork structure may represent the basic structure of basement membrane. Some of the observed architectural dissimilarities in basement membrane types may reflect their different functional properties, which in turn may reflect the heterogeneous distribution of major basement membrane components as demonstrated by immunohistochemical and biochemical studies.