Polycyclic aromatic hydrocarbons in waste waters and sewage sludge: Extraction and clean-up for HPLC analysis with fluorescence detection

Hydrothermal carbonization of digested sewage sludge: The fate of heavy metals, PAHs, PCBs, dioxins and pesticides

Hydrothermal carbonization (HTC) is emerging as a promising technology for the management of sewage sludge. The fate of phytosanitary products, Polycyclic aromatic hydrocarbons (PAHs) and PCBs (Polychlorinated biphenyls) after HTC, as well as the formation of dioxins and furans, is still unclear. Moreover, only little information is available on the distribution of heavy metals and major nutrients between the hydrochars and the process water. Here, we aim to contribute to fill these gaps. HTC of sewage sludge from six different wastewater treatment plants has been carried out at 220 °C for 85 min. Feedstock, hydrochars and spent liquor have been then characterized and discussed. HTC is here proven to be a suitable technology for the immobilization of both heavy hydrocarbons and heavy metals, with the exception arsenic, which was also found in the spent liquor at a significant proportion (∼15-∼50%). DDD, DDT, DDE were detected in all sludge samples and their content was reduced by nearly one order of magnitude after the process. HTC is here proven to not be responsible at an appreciable extent of PCBs enrichment of the processed solids. Moreover, the sum of PCDDs and PCDFs in hydrochars never exceeded 20 ng kg^-1 s.s. The results obtained encourage further developing of HTC, with the aim to improve the sustainability of sewage sludge management. Additional studies on the environmental impact of hydrochar when used as alternative fuel, as well as soil amendment, could lead to the overcoming of the issues which still hinder these applications.

Biodegradation of polycyclic aromatic hydrocarbons, phenol and sodium sulfate by Nocardia species isolated and characterized from Iranian ecosystems

Anthropogenic pollutants are known to have adverse effect on ecosystem, biodiversity and human health. Bioremediation is an option that has been widely used to remediate organic contaminants and reduce the risk of these hazardous materials. Microorganisms are readily available to screen and can be rapidly characterized to be applied in many extreme environmental conditions. Actinomycetes have a great potential for the production of bioactive secondary metabolites which have biodegradation activity. This study aimed to screen and characterize Nocardia species with biodegradation potential from diverse Iranian ecosystems. The isolates were screened from 90 collected environmental samples, identified and characterized using conventional and molecular microbiological methods including the PCR amplification and sequencing analysis of 16S rRNA and rpoB genetic markers. Growth rate in presence of pollutants, chromatography, Gibbs and turbidometric methods were used to determine bioremediation ability. A total of 19 Nocardia isolates were recovered from the cultured samples (21.1%) that belonged to 10 various species. The most prevalent Nocardia species was N. farcinica; 4 isolates (21%), followed by N. cyriacigeorgica and N. cashijiensis like; 3 isolates each (15.7%) and N. asteroides and N. kroppenstedtii; 2 isolates each (10.5%). Our results showed that various Nocardia species have great potential for bioremediation purposes, although they have not received much attention of the scholars for such significant usage.

Polycyclic aromatic compounds (PACs) in the Canadian environment: A review of sampling techniques, strategies and instrumentation

A wide variety of sampling techniques and strategies are needed to analyze polycyclic aromatic compounds (PACs) and interpret their distributions in various environmental media (i.e., air, water, snow, soils, sediments, peat and biological material). In this review, we provide a summary of commonly employed sampling methods and strategies, as well as a discussion of routine and innovative approaches used to quantify and characterize PACs in frequently targeted environmental samples, with specific examples and applications in Canadian investigations. The pros and cons of different analytical techniques, including gas chromatography - flame ionization detection (GC-FID), GC low-resolution mass spectrometry (GC-LRMS), high performance liquid chromatography (HPLC) with ultraviolet, fluorescence or MS detection, GC high-resolution MS (GC-HRMS) and compound-specific stable (δ¹³C, δ²H) and radiocarbon (Δ¹⁴C) isotope analysis are considered. Using as an example research carried out in Canada's Athabasca oil sands region (AOSR), where alkylated polycyclic aromatic hydrocarbons and sulfur-containing dibenzothiophenes are frequently targeted, the need to move beyond the standard list of sixteen EPA priority PAHs and for adoption of an AOSR bitumen PAC reference standard are highlighted.

Hydrothermal carbonization of sewage sludge: A critical analysis of process severity, hydrochar properties and environmental implications

Hydrothermal carbonization (HTC) of sewage sludge reduces the waste volume and can be source of energy and valuable products. Furthermore, HTC offers several advantages over conventional dry-thermal pre-treatments, as no prior drying is requested, and the high quality of the char produced promotes applications as energy production and storage, wastewater remediation, and soil amendment. Relationships between char yields, physicochemical properties and process parameters are here analysed, with the aim to provide insight into the choice of the process severity required to fit the desired application. Moreover, presence and fate of heavy metals and organic contaminants are discussed. The highest reaction temperature is the main parameter affecting the physicochemical characteristics of the char produced, while the heating rate governs the heat mass transfer and the rate of intermediates formation. Depolymerization of the biomass results in a reduction of the oxygen to carbon ratio and, therefore, in augmented high heating values, further increased by deposition of 5-(hydroxymethyl)furfural. Recirculation of process water may enhance dehydration reactions and the deposition of degraded polymers, increasing dewaterability and yield, but field trials are recommended to assess the feasibility of this option. An overuse of chars for energy generation purposes would be deleterious for the environmental life cycle. Further research is encouraged to assess the pollutants abatement and their degradation pathways when incorporated in the carbonaceous product, to promote the application of hydrochars as soil amendment, as well as for environmental remediation purposes.

Determination of polycyclic aromatic hydrocarbons with molecular mass 302 in Standard Reference Material 1597a by reversed-phase liquid chromatography and stop-flow fluorescence detection

The identification of isomeric polycyclic aromatic hydrocarbons (PAHs) in complex samples via reversed-phase liquid chromatography (RPLC) with fluorescence detection (FL) is normally based on matching the chromatographic retention times of suspected peaks of interest with reference standards. Since no spectral information is obtained during the chromatographic run, the accurate identification of co-eluting PAHs with similar chromatographic behaviors requires confirmation with additional chromatographic methods. This is particularly true for the analysis of PAH isomers with the relative molecular mass (MM, g/mol) 302. The work presented here explores the information content of room-temperature fluorescence spectra for the analysis of PAHs with MM 302 in the Standard Reference Material (SRM) 1597a. Fluorescence spectra were recorded under stop-flow conditions with the aid of a commercial HPLC system. Of the 21 MM 302 PAHs known to be present in the SRM 1597a, 20 were tentatively identified based on retention times and the presence of 18 was confirmed based on excitation and emission spectral profiles.

Screening, isolation and molecular identification of biodegrading mycobacteria from Iranian ecosystems and analysis of their biodegradation activity

Anthropogenic origin pollutants including pesticides, heavy metals, pharmaceuticals and industry chemicals impose many risks to human health and environment and bioremediation has been considered the strategy of choice to reduce the risk of hazardous chemicals. In the current study, we aimed to screen and characterize mycobacteria from the diverse range of Iranian aquatic and terrestrial ecosystems with harsh and unfavorable environmental conditions that can be utilized for biodegradation of target pollutants. Mycobacteria were isolated from a collection of 90 environmental samples and identified to the species level using conventional microbiological and molecular methods including the PCR amplification of hsp65 and sequence analysis of, 16S rRNA genetic markers. The growth rate of the isolates in presence of pollutants, chromatography, Gibbs and turbidometric methods were used to assess their biodegradation activity. A total of 39 mycobacterial isolates (43.3%) were recovered from 90 samples that belonged to 21 various species consisting of M. fortuitum; 6 isolates, M. flavescens and M. paragordonae; 4 isolates each, M. monacense, M. fredriksbergense and M. aurum; 2 isolates each, 7 single isolates of M. conceptionense, M. porcinum, M. simiae, M. celeriflavum, M. novocastrense, M. neoaurum, M. obuense and 12 isolates that belonged to 8 unknown potentially novel mycobacterial species. The isolates were categorized in three groups based on their bioremediation activity, i.e., 5 (12.8%) organisms without biodegradation activity, 20 (51.2%) organisms with previously reported biodegradation activity, and 14 (35.9%) organisms that showed biodegradation activity but not previously reported. Our results showed that the Iranian ecosystems harbor a good reservoir of diverse mycobacterial species with biodegrading potentiality for neutralizing environmental chemical pollutants.

Procedures of determining organic trace compounds in municipal sewage sludge-a review

Sewage sludge is the largest by-product generated during the wastewater treatment process. Since large amounts of sludge are being produced, different ways of disposal have been introduced. One tempting option is to use it as fertilizer in agricultural fields due to its high contents of inorganic nutrients. This, however, can be limited by the amount of trace contaminants in the sewage sludge, containing a variety of microbiological pollutants and pathogens but also inorganic and organic contaminants. The bioavailability and the effects of trace contaminants on the microorganisms of soil are still largely unknown as well as their mixture effects. Therefore, there is a need to analyze the sludge to test its suitability before further use. In this article, a variety of sampling, pretreatment, extraction, and analysis methods have been reviewed. Additionally, different organic trace compounds often found in the sewage sludge and their methods of analysis have been compiled. In addition to traditional Soxhlet extraction, the most common extraction methods of organic contaminants in sludge include ultrasonic extraction (USE), supercritical fluid extraction (SFE), microwave-assisted extraction (MAE), and pressurized liquid extraction (PLE) followed by instrumental analysis based on gas or liquid chromatography and mass spectrometry.

β-CD Dimer-immobilized Ag Assembly Embedded Silica Nanoparticles for Sensitive Detection of Polycyclic Aromatic Hydrocarbons

We designed a β-CD dimer on silver nanoparticles embedded with silica nanoparticles (Ag@SiO₂ NPs) structure to detect polycyclic aromatic hydrocarbons (PAHs). Silica NPs were utilized as a template for embedding silver NPs to create hot spot structures and enhance the surface-enhanced Raman scattering (SERS) signal, and a thioether-bridged dimeric β-CD was immobilized on Ag NPs to capture PAHs. The assembled Ag NPs on silica NPs were confirmed by TEM and the presence of β-CD dimer on Ag@SiO₂ was confirmed by UV-vis and attenuated total reflection-Fourier transform infrared spectroscopy. The β-CD dimer@Ag@SiO₂ NPs were used as SERS substrate for detecting perylene, a PAH, directly and in a wide linearity range of 10⁻⁷ M to 10⁻² M with a low detection limit of 10⁻⁸ M. Also, the β-CD dimer@Ag@SiO₂ NPs exhibited 1000-fold greater sensitivity than Ag@SiO₂ NPs in terms of their perylene detection limit. Furthermore, we demonstrated the possibility of detecting various PAH compounds using the β-CD dimer@Ag@SiO₂ NPs as a multiplex detection tool. Various PAH compounds with the NPs exhibited their distinct SERS bands by the ratio of each PAHs. This approach of utilizing the assembled structure and the ligands to recognize target has potential for use in sensitive analytical sensors.

Organic micropollutants in coastal waters from NW Mediterranean Sea: sources distribution and potential risk

This study provides a first estimation on the sources, distribution and risk of organic micropollutants (OMPs) in coastal waters from NW Mediterranean Sea. Polycyclic aromatic hydrocarbons, polychlorinated biphenyls, organochlorinated pesticides, polybrominated diphenyl ethers, phthalates and alkylphenols were analyzed by solid phase extraction and gas chromatography coupled to tandem mass spectrometry (SPE-GC-EI-MS/MS). River waters and wastewater treatment plant effluents discharging to the sea were identified as the main sources of OMPs to coastal waters, with an estimated input amount of around of 25,800 g d(-1). The concentration of ΣOMPs in coastal areas ranged from 17.4 to 8442 ng L(-1), and was the highest in port waters, followed by coastal and river mouth seawaters. A summarized overview of the patterns and sources of OMP contamination on the investigated coastal sea waters of NW Mediterranean Sea, as well as of their geographical distribution was obtained by Principal Component Analysis of the complete data set after its adequate pretreatment. Alkylphenols, bisphenol A and phthalates were the main contributors to ΣOMPs and produced an estimated significant pollution risk for fish, algae and the sensitive mysid shrimp organisms in seawater samples. The combination of GC-MS/MS, chemometrics and risk analysis is proven to be useful for a better control and management of OMP discharges.

Acute effect of benzo[a]anthracene on the biodegradation of peptone under aerobic conditions

BACKGROUND

This study investigated the acute effect of benzo[a]anthracene, a significant compound among polycyclic aromatic hydrocarbons, on the biodegradation of a synthetic organic substrate-a peptone/meat extract mixture-under aerobic conditions.

METHODS

A laboratory-scale sequencing batch reactor was sustained at steady state at a sludge age of 10 days with substrate feeding. Inhibition tests involved running a series of batch reactors initially seeded with the biomass obtained from the parent reactor. After the biomass seeding, the reactors were started with the peptone mixture and a range of initial benzo[a]anthracene concentrations between 0.5 and 88 mg/L. Experimental profiles of oxygen uptake rates and polyhydroxyalkanoates were evaluated by calibration of a selected model.

RESULTS

Lower doses of benzo[a]anthracene had no effect on process kinetics. The noticeable acute impact was only observed with the addition of 88 mg/L of benzo[a]anthracene, but it was limited with the storage mechanism: the amount of organic substrate diverted to polyhydroxyalkanoates was significantly reduced with a corresponding decrease in the maximum storage rate, k (STO), from 2.7 down to 0.6 day(-1). Similarly, the maximum growth rate from internally stored polyhydroxyalkanoates was lowered from 2.3 to 1.0 day(-1).

CONCLUSION

Among the mechanisms for direct substrate utilization, only the hydrolysis rate was slightly reduced, but otherwise, the overall COD removal efficiency was not affected.

Stir bar sorptive extraction-thermal desorption-gas chromatography-mass spectrometry: an effective tool for determining persistent organic pollutants and nonylphenol in coastal waters in compliance with existing Directives

A multi-residual method based on stir bar sorptive extraction coupled with thermal desorption-gas chromatography-mass spectrometry (SBSE-TD-GC-MS) has been developed to measure 49 organic pollutants (organochlorine pesticides, polycyclic aromatic hydrocarbons, polychlorinated biphenyls, polybrominated diphenyl ethers and nonylphenol) in seawater. Using 100ml of water, the method exhibited good linearity, with recoveries between 86% and 118% and relative standard deviation between 2% and 24% for almost all compounds. The method was applied to determine target contaminants in Catalonian seawater, including coastal areas, ports and desalination plant feed water. Overall individual compound levels oscillated between 0.16 and 597 ng l(-1); PAHs and nonylpenol were the compounds found at the highest concentrations. The method provided LODs between 0.011 and 2.5 ng l(-1), lower than the Environmental Quality Standards (EQS) fixed by Directive 2008/105/EC. In compliance with the directive, this method can be used as a tool to survey target compounds and is aimed at protecting coastal ecosystems from chemical pollution.

Determination and occurrence of phthalates, alkylphenols, bisphenol A, PBDEs, PCBs and PAHs in an industrial sewage grid discharging to a Municipal Wastewater Treatment Plant

Industrial and urban discharges release organic contaminants which might affect the quality of receiving waters if not properly eliminated in Wastewater Treatment Plants (WWTP). This study is aimed to evaluate the source, transport and fate of contaminants of industrial origin in a sewage grid discharging to a WWTP and finally to the sea. The sampling network covered an industrial and urban area and wastewaters, influents and effluents of a WWTP were analyzed using a newly developed multiresidual method to capture a wide range contaminants (phthalates, alkylphenols, bisphenol A, PBDEs, PCBs and PAHs). Alkylphenols and phthalates followed by PAHs were the main compounds detected at levels between 0.01 to 698 microg l(-1) in the sewage pipelines. At the WWTP influent they were detected at concentrations up to 345 microg l(-1). The contaminant load was eliminated in a 64-92% during the primary and secondary treatment of the plant. However, alkylphenols, phthalates bisphenol A and traces of PAHs were discharged with the effluent, producing a total net input of 825 g d(-1) to the sea. The study of wastewaters herein proposed can be used to better predict the loads into WWTP to improve treatment conditions according to specific sewage inputs and to assess the risks associated with the continuous discharge of contaminants to receiving plants.

Constructed wetlands treating highway runoff in the central Mediterranean region

Two free water surface (FWS) and two subsurface flow (SSF) pilot-size constructed wetlands treating highway runoff (HRO) were monitored over a period of two years (September 2005-August 2007). One FWS and one SSF were designed with a hydraulic retention time (HRT) of 12h, named FWS12 and SSF12, respectively, with each one capable of treating a maximum HRO of 12.6 m(3) d(-1). The other couple, named FWS24 and SSF24, respectively, was designed with an HRT of 24h, with each receiving a maximum HRO of 6.3 m(3) d(-1). The influent flowed from a highway section with a total surface 2752 m(2) on the island of Crete, Greece, in the heart of the South-Central Mediterranean region. Influent and effluent were monitored for COD, TSS, total N (TN), NO(3)(-) and total P (TP) concentrations. Furthermore, removal efficiencies were examined for heavy metals (Cu, Ni, Pb, Zn) for both years, while polycyclic aromatic compounds (PAHs) were examined for the period between September 2006 and August 2007. The influent had a two-year average COD value of 101 mg l(-1), whereas the mean values for TSS, TN, N-NO(3)(-) and TP were 203, 4.30, 1.25 and 4.17 mg l(-1), respectively. For Cu, Ni, Pb and Zn the respective two-year mean influent concentrations were 56, 114, 49 and 250 microg l(-1). Mean concentration of total PAHs in runoff (summation operator PAHs, 16 compounds) were 12.01 microg l(-1). The performance among the four beds was not significantly different according to ANOVA analysis followed by Tukey test (at p<0.05) for almost all the above physicochemical parameters, suggesting that all systems performed in a similar way. All studied systems, achieved a mean of two-year removal efficiencies of 47% for COD, 89% for TSS, 49% for TN, 58% for N-NO(3)(-), 60% for TP, 47% for Cu, 23% for Ni, 33% for Pb, 61% for Zn and 59% for summation operator PAHs (16 compounds).

The removal of Polycyclic Aromatic Hydrocarbons in the wastewater treatment process: experimental calculations and model predictions

The removal of PAHs during the wastewater treatment process was examined in an activated sludge mode conventional facility. Concentrations reported are taken from an earlier measuring campaign. Removals of PAHs ranged between 28 and 67% in the primary, <1-61% in the secondary stage, and 37-89% in the whole process. Significant positive relationships were observed for removal efficiencies and the log K(ow) of PAHs in the primary and the log K(H) of PAHs in the secondary stage. Experimental removals were compared to those obtained from the FATE model. In the primary stage, predicted removals were lower than those experimentally calculated while in the secondary stage were higher. Predicted removals were apportioned mainly to sorption with negligible contribution from volatilization and biodegradation. Remarkable consistency between experimental and modeled removal efficiencies (-20-+20%) was observed for almost all PAHs in the whole treatment process.

Polycyclic aromatic hydrocarbons (PAHs) from coal combustion: emissions, analysis, and toxicology

Coal may become more important as an energy source in the 21st century, and coal contains large quantities of organic and inorganic matter. When coal burns chemical and physical changes take place, and many toxic compounds are formed and emitted. Polycyclic aromatic hydrocarbons (PAHs) are among those compounds formed and are considered to pose potential health hazards because some PAHs are known carcinogens. Based on their toxicology, 16 PAHs are considered as priority pollutants by the USEPA. More attention must be given to the various methods of extraction and analysis of PAH from coal or coal products to accurately explain and determine the species of PAHs. The influences of the extraction time, solvents, and methods for PAH identification are important. In the future, more methods and influences will be studied more carefully and widely. PAHs are environmental pollutants, are highly lipid soluble, and can be absorbed by the lungs, gut, and skin of mammals because they are associated with fine particles from coal combustion. More attention is being given to PAHs because of their carcinogenic and mutagenic action. We suggest that when using a coal stove indoors, a chimney should be used; the particles and gas containing PAHs should be released outdoors to reduce the health hazard, especially in Southwest China. During coal utilization processes, such as coal combustion and pyrolysis, PAHs released may be divided into two categories according to their formation pathways: one pathway is derived from complex chemical reactions and the other is from free PAHs transferred from the original coal. The formation and emission of PAHs is a complex physical and chemical process that has received considerable attention in recent years. It is suggested that the formation mechanisms of PAHs will be an increasingly important topic for researchers to find methods for controlling emissions during coal combustion.

Analysis of 27 polycyclic aromatic hydrocarbons by matrix solid-phase dispersion and isotope dilution gas chromatography-mass spectrometry in sewage sludge from the Spanish area of Madrid

A method for the determination of 27 polycyclic aromatic hydrocarbons (PAHs) in sludge from wastewater treatment plants (WWTPs) located in urban, industrial or rural zones is presented. PAHs were extracted by matrix solid-phase dispersion (MSPD) assisted by sonication. Purification of extracts was carried out by solid-phase extraction with C(18) and PAHs were eluted with acetonitrile. PAHs were determined by isotope dilution gas chromatography with electron impact mass spectrometric detection in the selected ion-monitoring mode (GC-MS-SIM), using deuterated PAHs as internal standards. The limits of detection ranged from 0.03 ng/g for acenaphthylene to 0.45 ng/g for benzo[b]naphtho[2,1-d]thyophene. After optimization, the method was validated with a certified reference sludge. The proposed analytical method was applied to determine PAH levels in sewage sludge samples collected from 19 water treatment plants located in the province of Madrid (Spain). In most of the examined samples, phenanthrene was the main compound with a mean concentration of 1062 ng/g. PAHs were detected in all of the samples, with total concentrations between 390 and 6390 ng/g dry weight for the 27 PAHs analyzed and from 310 to 5120 ng/g dry weight for the sum of the 10 PAHs considered in the draft European Union directive.

Sample preparation of sewage sludge and soil samples for the determination of polycyclic aromatic hydrocarbons based on one-pot microwave-assisted saponification and extraction

A microwave-assisted sample preparation (MASP) procedure was developed for the analysis of polycyclic aromatic hydrocarbons (PAHs) in sewage sludge and soil samples. The procedure involved the simultaneous microwave-assisted extraction of PAHs with n-hexane and the hydrolysis of samples with methanolic potassium hydroxide. Because of the complex nature of the samples, the extracts were submitted to further cleaning with silica and Florisil solid-phase extraction cartridges connected in series. Naphthalene, acenaphthene, fluorene, phenanthrene, anthracene, fluoranthene, pyrene, benz[a]anthracene, chrysene, benzo[e]pyrene, benzo[b]fluoranthene, benzo[k]fluoranthene, benzo[a]pyrene, dibenz[a,h]anthracene, benzo[g,h,i]perylene, and indeno[1,2,3-cd]pyrene, were considered in the study. Quantification limits obtained for all of these compounds (between 0.4 and 14.8 microg kg(-1) dry mass) were well below of the limits recommended in the USA and EU. Overall recovery values ranged from 60 to 100%, with most losses being due to evaporation in the solvent exchange stages of the procedure, although excellent extraction recoveries were obtained. Validation of the accuracy was carried out with BCR-088 (sewage sludge) and BCR-524 (contaminated industrial soil) reference materials.

Temporal evolution of polycyclic aromatic hydrocarbons (PAHs) in sludge from wastewater treatment plants: comparison between PAHs and heavy metals

This paper presents results on the presence and temporal variability of the 16 PAHs recommended by the EPA in primary, secondary and digested sewage sludge over a year. The sewage sludges originated from the Guadalete wastewater treatment plant (WWTP) site in Jerez de la Frontera (Cádiz, Spain). These organic pollutants have been extracted from the sewage sludge by microwave energy. High performance liquid chromatography coupled with diode array (HPLC-DAD) or fluorescence (HPLC-FL) detectors have been used. The results showed that total PAHs concentration varied between 1,945 ng g(-1) dry matter (DM) for primary sludges collected in March and 10,100 ng g(-1) DM for primary sludge collected in June. Generally, concentrations of PAHs were higher in compost and digested sludge than in fresh one. On the other hand, the highest concentration of PAHs were found on summer. This thing is associated to the traffic increase from inland zones to the coast (Jerez de la Frontera is very near to beaches). Finally, this paper present a comparative study of the American an European legislation concluding that the limits of concentrations established are not exceeded. In addition heavy metals were analysed. The origin of PAHs and heavy metals seems to be different.

Assessment of the environmental hazard from municipal and industrial wastewater treatment sludge by employing chemical and biological methods

Chemical analyses and toxicity testing were employed in conjunction to evaluate the environmental hazard from the wasted sludge generated during the biological treatment of urban and industrial wastewaters. Chemical analyses included determination of seven polychlorinated biphenyls (PCBs), 13 polycyclic aromatic hydrocarbons (PAHs), total organic carbon (TOC), and seven heavy metals (As, Cd, Cr, Cu, Pb, Mn, and Zn) in sludge and sludge leachates deriving from two standard leaching procedures: (a) the mild leaching test EN-12457-2 proposed by EC and (b) the relatively aggressive toxicity characteristic leaching procedure (TCLP) leaching test proposed by US EPA. Acute toxicity measurements were performed in aqueous sludge elutriates and leachates by using bioluminescence bacteria. The urban sludge was found to be more enriched with PAHs than the industrial sludge, however, at levels below the EU limits for sludge application. The total PCB content (Sigma7PCBs) in both sludges, particularly in the industrial sludge, exceeded the proposed European limit for sludge use as soil amendment. With regards to their heavy metal content, both sludges met the requirements for use in agriculture. The urban sludge exhibited high ecotoxicity, while the industrial sludge with almost two times lower toxicity was classified as not toxic to slightly toxic. The EN and the TCLP leaching procedures resulted in different sludge characterizations both from chemical and from ecotoxicological points of view. The EN procedure appeared to be more sensitive to the potential environmental risk from sludge disposal. The results of the study revealed the necessity for combining chemical with ecotoxicological criteria for integrated characterization of wasted sludge and the need for harmonization of the methods employed for waste classification.

Determination of sixteen polycyclic aromatic hydrocarbons in aqueous and solid samples from an Italian wastewater treatment plant

A robust procedure for the determination of 16 US EPA PAHs in both aqueous (e.g. wastewaters, industrial discharges, treated effluents) and solid samples (e.g. suspended solids and sludge) from a wastewater treatment plant (WWTP) is presented. Recovery experiments using different percentages of organic modifier, sorbents and eluting solvent mixtures were carried out in Milli-Q water (1000 mL) spiked with a mixture of the PAH analytes (100 ng/L of each analyte). The solid phase extraction (SPE) procedures applied to spiked waste water samples (1000 mL; 100 ng/L spiking level) permitted simultaneous recovery of all the 16PAHs with yields >70% (6-13% RSD). SPE clean up procedures applied to sewage and stabilized sludge extracts, showed percent recoveries in the range 73-92% (7-13% RSD) and 71-89% (7-12% RSD), respectively. The methods were used for the determination of PAHs in aqueous and solid samples from the WWTP of Fusina (Venice, Italy). Mean concentrations, as the sum of the 16PAHs in aqueous and suspended solid samples, were found to be approx. in the 1.12-4.62 microg/L range. Sewage and stabilized sludge samples contained mean PAH concentrations, as sum of 16 compounds, in the concentration range of 1.44-1.26 mg/kg, respectively. Extraction and clean up procedures for sludge samples were validated using EPA certified reference material IRM-104 (CRM No. 912). Instrumental analyses were performed by coupling HPLC with UV-diode array detection (UV-DAD) and fluorescence detection (FLD).

Persistent organic pollutants (POPs) in the conventional activated sludge treatment process: fate and mass balance

The fate and the mass balance of persistent organic pollutants (POPs) during the conventional activated sludge treatment process were investigated in the wastewater treatment plant of the city of Thessaloniki, northern Greece. The POPs of interest were 7 polychlorinated biphenyls and 19 organochlorine pesticides. Target compounds were determined at six different points across the treatment system: the influent, the effluent of the primary sedimentation tank, the effluent of the secondary sedimentation tank, the primary sludge, the activated sludge from the recirculation stream, and the digested/dewatered sludge. The distribution of POPs between the dissolved and the adsorbed phases of wastewater and sludge was investigated. A good linear relationship between the distribution coefficients, Kd, and the octanol-water partition coefficients, Kow, of the solutes was observed only in raw wastewater, suggesting that other factors affect the phase distribution of organic compounds in treated wastewater. For all POPs, a significant increase in partitioning with a decreasing solids concentration was observed, revealing an effect from non-settling microparticles remaining in the "dissolved" phase during the separation procedure. A good linear relationship was also revealed between logKd and the dissolved organic carbon (DOC) content of wastewater, suggesting that DOC favors the advective transport of POPs in the dissolved phase. Almost all POPs showed good mass balance agreements at both the primary and the secondary treatment. The losses observed for some species could be attributed to biodegradation/biotransformation rather than volatilization. The relative distribution between the treated effluent and the waste sludge streams varied largely among different compounds, with p-p'-DDE being highly accumulated in the waste sludge (98%) but almost 60% of alpha-HCH remaining in the treated effluent.

Partitioning of polycyclic aromatic hydrocarbons between water and particles compared to bioaccumulation in mussels: a harbour case

Water and particles from three sites located in Halifax Harbour, near and further away from combined municipal sewage effluents (CMSE) were analysed for parental and alkylated polycyclic aromatic hydrocarbons (par and alkPAH). Bioavailability of PAH was compared for inter-tidal mussels collected at the same sites in April and November. The PAH fingerprint determined over 9 sampling times covering a period of 19 months differed more between phases (water and particles) and seasons, than between sites. In the spring, more alkPAH associated with diesel and gasoline were detected in the soluble phase, along with more bioaccumulation of alkPAH in inter-tidal mussels. A broader number of parPAH were detected in mussels collected in the fall. The mean sum of dissolved alkPAH concentrations was higher in water at the site closer to raw CMSE than at the other two sites and particles of that site. However, lowest bioconcentration factors (BCF) were determined in mussels of this more contaminated site. Similar biota-particle accumulation factors (BPAF) were determined for parPAH in mussels from the three sites, all lower than the BCF of alkPAH. The study indicates that sewage treatment plants will reduce the amount of parPAH especially larger than fluoranthene and pyrene from being deposited in the harbour; that alk naphthalenes and fluorenes present in water will continue to be discharged; that the disturbance of sediments can make particle-bound PAH available to mussels.

Developments in the use of chromatographic techniques in marine laboratories for the determination of halogenated contaminants and polycyclic aromatic hydrocarbons

Chromatography has been an important tool in marine laboratories. Since the 1960s, marine laboratories have been involved in the analysis of polychlorinated biphenyls (PCBs), organochlorine pesticides (OCPs), polycyclic aromatic hydrocarbons (PAHs), and brominated flame retardants (BFRs). Column chromatography and liquid chromatography (LC) techniques have been used, mainly in the clean-up phase, while gas chromatography (GC) has been used extensively in the final determination of these contaminants. Developments have been observed from the use of packed GC columns, via capillary columns to the use of heart-cut multi-dimensional GC and comprehensive multi-dimensional GC. The progress made in interlaboratory studies and the availability of certified reference materials are discussed.

Rapid determination of polycyclic aromatic hydrocarbons in sewage sludges using microwave-assisted solvent extraction. Comparison with other extraction methods

The presence of toxic organic micropollutants in municipal sewage sludges is a major problem on account of risks associated with the agricultural use of the sludges and therefore maximum tolerance limits are imposed. The aim of our study was to develop a reliable and fast analytical procedure for the determination of polycyclic aromatic hydrocarbons in sewage sludges, using focused microwave-assisted extraction. Optimization of the extraction conditions was performed on real matrices. The results of a 2(3) factorial design showed that extraction time was the only influential factor. The selected conditions (30 W, 10 min, 30 ml solvent) were used for real sludges and a certified marine sediment, leading to recoveries of between 56 and 75%. Results of an interlaboratory test confirmed these values. Finally, the technique was compared to traditional techniques (Soxhlet, sonication), and the more recent pressurized liquid extraction technique. Focused microwave-assisted extraction remains an attractive alternative technique due to its rapidity, the low solvent volume required and its moderate investment cost.

Polycyclic aromatic hydrocarbon contamination and LUMIStox solvent extract toxicity of marine sediments in the North Aegean Sea, Greece

Organic extracts of surface marine sediment collected from six sites within the bay of Kavala (north Aegean Sea, Greece) were used for determining priority pollutant polycyclic aromatic hydrocarbons (PAHs) and doing toxicity testing. PAH analyses and LUMIStox acute toxicity measurements were conducted in two sediment grain-size fractions: silt/clay (< 63 microm) and sand (63-2000 microm). Sixteen PAH concentrations were found at low- to moderate levels, ranging from 44 to 166 ng/g dry weight in the fine fraction and from 45 to 148 ng/g dry weight in the coarse fraction. Molecular indices revealed that PAHs in the bay sediment originate mainly from pyrolytic sources, but some petroleum influence was also evident. A comparison of sedimentary PAH levels with sediment quality guidelines (SQGs) indicated an absence of acutely toxic concentrations. However, all sediment extracts were found to be toxic with the LUMIStox acute toxicity test, with 15-min EC(50)s in the ranges of 1.0-4.0 and 1.1-4.5 mg of dry sediment/mL for the fine and the coarse fractions, respectively. No significant correlations between EC(50)s and concentrations of individual or total PAHs was found, suggesting that chemical analysis of PAHs alone cannot be considered a reliable indicator of sediment toxicity.

New procedure for selective extraction of polycyclic aromatic hydrocarbons in plants for gas chromatographic-mass spectrometric analysis

A new solid-phase extraction method for the clean-up and the quantitation by GC-MS of regulated polycyclic aromatic hydrocarbons (PAHs) from lettuce was developed and the experimental conditions were optimized. After ultrasonic extraction using toluene and saponification of samples, a clean-up of extracts through solid-phase extraction was performed. Samples were finally analyzed by gas chromatography-mass spectrometry (GC-MS) using an internal deuterated standard. Saponification by KOH in methanol-water (80:20) was successful allowing a good elimination of the interfering chlorophylls from the extracts containing the PAHs. The average recovery of the 16 regulated PAHs was 70, 74, 79 and 89%, respectively, for naphthalene, acenaphthylene, acenaphthene and chrysene and higher than 94% for the others.

Concentrations and distribution of some polychlorinated biphenyls (PCBs) and polycyclic aromatic hydrocarbons (PAHs) in an ombrotrophic peat bog profile of Switzerland

An efficient method was developed for the analysis of selected PCBs and PAHs in dry peat samples. The method includes a shaking extraction using acetone and hexane followed by the purification of the crude extract by gel permeation chromatography (GPC) which turned out to be the key clean-up step. The method was used to determine seven indicator PCBs and 16 EPA-PAHs in individual sections of an ombrotrophic peat core in south-west Switzerland. The maximum concentrations of PCBs (19 microg sigma PCBs/kg dm) were found at a peat depth of 10-15 cm which is estimated to correspond to a time period of 1976-1960 whereas the PAH profile showed a maximum (2853 microg sigma PAHs/kg dm) at a depth of 20-25 cm which represents circa 1951-1930. Compared to these maxima, the concentrations of PAHs in the top layer (1990-1986) are six times lower, but the decline in PCBs is only 38%. The concentration profiles are generally consistent with known changes in contaminant emissions, and suggest that more detailed studies of ombrogenic peat bog profiles could be used for detailed reconstructions of the changing atmospheric fluxes of these and other organic contaminants.

Polycyclic aromatic hydrocarbons in the bulk precipitation and surface waters of Northern Greece

Bulk (wet and dry) precipitation and surface water sampling was undertaken in the main plain of central Macedonia in Northern Greece. Fourteen polycyclic aromatic hydrocarbons (PAHs) included in the US EPA's priority pollutant list were analysed. The concentrations determined in bulk precipitation were in general within the range of values worldwide reported. Concentrations were highest in the cold months. Deposition fluxes of PAHs were of the same order of magnitude as reported data. The greatest values were found when high concentrations of PAHs in precipitation coincided with large precipitation amounts. The concentrations of PAHs in surface waters (main rivers, tributaries, ditches, etc) were in general lower than those in bulk precipitation, and among the lowest reported for European rivers, excepting Np and Ph. Bulk deposition and domestic effluents are suggested as being the main PAH sources into surface waters.

Solid-phase extraction of polycyclic aromatic compounds

Solid-phase extraction (SPE) for two groups of polyaromatic compounds--polycyclic aromatic hydrocarbons and naphthalenesulfonates--with completely different problems in the extraction process are reviewed. The sorbents used in each case and the different steps of SPE are studied. Particular problems encountered in the SPE of each group are described. Adsorption problems of PAHs which require an organic solvent or a surfactant to be added to the sample are explained. The need of ion-pair solid-phase extraction for extracting naphthalenesulfonates and the influence of the inorganic species in the extraction are discussed. The on-line systems are described for both group of compounds.

Selective immunoclean-up followed by liquid or gas chromatography for the monitoring of polycyclic aromatic hydrocarbons in urban waste water and sewage sludges used for soil amendment

A selective clean-up procedure using immunoaffinity solid-phase extraction was applied for the trace-level determination of polycyclic aromatic hydrocarbons (PAHs) in urban waste water and sewage sludges used for soil amendment. Anti-pyrene antibodies have been immobilized on a silica-based sorbent and the cross-reactivity of the antibodies towards structurally related compounds were allowed to extract the whole class of priority PAHs. The selectivity of the antibodies provided clean extracts from sludges and, therefore, the identification and quantification were shown to be easier using either liquid chromatography (LC) with UV diode array and fluorescence detection in series or gas chromatography-mass spectrometry (GC-MS), although some loss of up to 50% was observed for the clean-up. The identification of the PAHs by matching of UV and MS spectra was greatly improved. The procedure, including immunoclean-up and LC coupled to diode array and fluorescence detection, was validated using certified reference materials with native PAHs of concentrations in the range of 0.57-2.16 mg/kg (dry sludges).