Graviresponses in herb and trees: a major role for the redistribution of tissue and growth stresses

Intrusive growth of initials does not affect cambial circumference in Robinia pseudoacacia

This study aimed to test the hypothesis whether intrusive growth of initial cells is related to the increase in circumference of Robinia pseudoacacia vascular cambium—both qualitatively and quantitatively. The mode of intrusive growth of cambial initial cells was also studied. Samples collected from tree trunks were examined using series of semi-thin transverse sections. Anatomical reconstructions of radial and tangential planes of analysed fragments of cambial tissue were made. Observations and measurements have shown that the intrusive growth of R. pseudoacacia initial cells does not contribute to an increase in tangential dimension of observed tissue fragments where cell rearrangement occurs. Moreover, initially separated tangential walls of cells (between which cambial initial cell elongates intrusively) are transformed into obliquely oriented walls. These results stand in accordance with a statement that only symplastic growth of initials, not intrusive growth, is responsible for the increase in circumference in all woody plants with the continuous cambial cylinder. Moreover, we managed to capture the moment of transition of initial status from one cell to another for the first time. This phenomenon may be explained on the basis of the system of mechanical stresses operating not only in the secondary meristematic tissue but also in a whole plant organism.

The Inducible Accumulation of Cell Wall-Bound p-Hydroxybenzoates Is Involved in the Regulation of Gravitropic Response of Poplar

Lignin in Populus species is acylated with p-hydroxybenzoate. Monolignol p-hydroxybenzoyltransferase 1 (PHBMT1) mediates p-hydroxybenzoylation of sinapyl alcohol, eventually leading to the modification of syringyl lignin subunits. Angiosperm trees upon gravistimulation undergo the re-orientation of their growth along with the production of specialized secondary xylem, i.e., tension wood (TW), that generates tensile force to pull the inclined stem or leaning branch upward. Sporadic evidence suggests that angiosperm TW contains relatively a high percentage of syringyl lignin and lignin-bound p-hydroxybenzoate. However, whether such lignin modification plays a role in gravitropic response remains unclear. By imposing mechanical bending and/or gravitropic stimuli to the hybrid aspens in the wild type (WT), lignin p-hydroxybenzoate deficient, and p-hydroxybenzoate overproduction plants, we examined the responses of plants to gravitropic/mechanical stress and their cell wall composition changes. We revealed that mechanical bending or gravitropic stimulation not only induced the overproduction of crystalline cellulose fibers and increased the relative abundance of syringyl lignin, but also significantly induced the expression of PHBMT1 and the increased accumulation of p-hydroxybenzoates in TW. Furthermore, we found that although disturbing lignin-bound p-hydroxybenzoate accumulation in the PHBMT1 knockout and overexpression (OE) poplars did not affect the major chemical composition shifts of the cell walls in their TW as occurred in the WT plants, depletion of p-hydroxybenzoates intensified the gravitropic curving of the plantlets in response to gravistimulation, evident with the enhanced stem secant bending angle. By contrast, hyperaccumulation of p-hydroxybenzoates mitigated gravitropic response. These data suggest that PHBMT1-mediated lignin modification is involved in the regulation of poplar gravitropic response and, likely by compromising gravitropism and/or enhancing autotropism, negatively coordinates the action of TW cellulose fibers to control the poplar wood deformation and plant growth.

How Do Trees Grow in Girth? Controversy on the Role of Cellular Events in the Vascular Cambium

Radial growth has long been a subject of interest in tree biology research. Recent studies have brought a significant change in the understanding of some basic processes characteristic to the vascular cambium, a meristem that produces secondary vascular tissues (phloem and xylem) in woody plants. A new hypothesis regarding the mechanism of intrusive growth of the cambial initials, which has been ratified by studies of the arrangement of cambial cells, negates the influence of this apical cell growth on the expansion of the cambial circumference. Instead, it suggests that the tip of the elongating cambial initial intrudes between the tangential (periclinal) walls, rather than the radial (anticlinal) walls, of the initial(s) and its(their) derivative(s) lying ahead of the elongating cell tip. The new concept also explains the hitherto obscure mechanism of the cell event called 'elimination of initials'. This article evaluates these new concepts of the cambial cell dynamics and offers a new interpretation for some curious events occurring in the cambial meristem in relation to the radial growth in woody plants.

Between Stress and Response: Function and Localization of Mechanosensitive Ca2+ Channels in Herbaceous and Perennial Plants

Over the past three decades, how plants sense and respond to mechanical stress has become a flourishing field of research. The pivotal role of mechanosensing in organogenesis and acclimation was demonstrated in various plants, and links are emerging between gene regulatory networks and physical forces exerted on tissues. However, how plant cells convert physical signals into chemical signals remains unclear. Numerous studies have focused on the role played by mechanosensitive (MS) calcium ion channels MCA, Piezo and OSCA. To complement these data, we combined data mining and visualization approaches to compare the tissue-specific expression of these genes, taking advantage of recent single-cell RNA-sequencing data obtained in the root apex and the stem of Arabidopsis and the Populus stem. These analyses raise questions about the relationships between the localization of MS channels and the localization of stress and responses. Such tissue-specific expression studies could help to elucidate the functions of MS channels. Finally, we stress the need for a better understanding of such mechanisms in trees, which are facing mechanical challenges of much higher magnitudes and over much longer time scales than herbaceous plants, and we mention practical applications of plant responsiveness to mechanical stress in agriculture and forestry.

Brassinosteroids Influence Arabidopsis Hypocotyl Graviresponses through Changes in Mannans and Cellulose

The force of gravity is a constant environmental factor. Plant shoots respond to gravity through negative gravitropism and gravity resistance. These responses are essential for plants to direct the growth of aerial organs away from the soil surface after germination and to keep an upright posture above ground. We took advantage of the effect of brassinosteroids (BRs) on the two types of graviresponses in Arabidopsis thaliana hypocotyls to disentangle functions of cell wall polymers during etiolated shoot growth. The ability of etiolated Arabidopsis seedlings to grow upward was suppressed in the presence of 24-epibrassinolide (EBL) but enhanced in the presence of brassinazole (BRZ), an inhibitor of BR biosynthesis. These effects were accompanied by changes in cell wall mechanics and composition. Cell wall biochemical analyses, confocal microscopy of the cellulose-specific pontamine S4B dye and cellular growth analyses revealed that the EBL and BRZ treatments correlated with changes in cellulose fibre organization, cell expansion at the hypocotyl base and mannan content. Indeed, a longitudinal reorientation of cellulose fibres and growth inhibition at the base of hypocotyls supported their upright posture whereas the presence of mannans reduced gravitropic bending. The negative effect of mannans on gravitropism is a new function for this class of hemicelluloses. We also found that EBL interferes with upright growth of hypocotyls through their uneven thickening at the base.

What do we know about growth of vessel elements of secondary xylem in woody plants?

Despite extensive knowledge about vessel element growth and the determination of the axial course of vessels, these processes are still not fully understood. They are usually explained as resulting primarily from hormonal regulation in stems. This review focuses on an increasingly discussed aspect - mechanical conditions in the vascular cambium. Mechanical conditions in cambial tissue are important for the growth of vessel elements, as well as other cambial derivatives. In relation to the type of stress acting on cambial cells (compressive versus tensile stress) we: (i) discuss the shape of the enlarging vessel elements observed in anatomical sections; (ii) present hypotheses regarding the location of intrusive growth of vessel elements and cambial initials; (iii) explain the relationship between the growth of vessel elements and fibres; and (iv) consider the effect of mechanical stress in determining the course of a vessel. We also highlight the relationship between mechanical stress and transport of the most extensively studied plant hormone - auxin. We conclude that the integration of a biomechanical factor with the commonly acknowledged hormonal regulation could significantly enhance the analysis of the formation of vessel elements as well as entire vessels, which transport water and minerals in numerous plant species.

Localised laccase activity modulates distribution of lignin polymers in gymnosperm compression wood

The woody stems of coniferous gymnosperms produce specialised compression wood to adjust the stem growth orientation in response to gravitropic stimulation. During this process, tracheids develop a compression-wood-specific S₂ L cell wall layer with lignins highly enriched with p-hydroxyphenyl (H)-type units derived from H-type monolignol, whereas lignins produced in the cell walls of normal wood tracheids are exclusively composed of guaiacyl (G)-type units from G-type monolignol with a trace amount of H-type units. We show that laccases, a class of lignin polymerisation enzymes, play a crucial role in the spatially organised polymerisation of H-type and G-type monolignols during compression wood formation in Japanese cypress (Chamaecyparis obtusa). We performed a series of chemical-probe-aided imaging analysis on C. obtusa compression wood cell walls, together with gene expression, protein localisation and enzymatic assays of C. obtusa laccases. Our data indicated that CoLac1 and CoLac3 with differential oxidation activities towards H-type and G-type monolignols were precisely localised to distinct cell wall layers in which H-type and G-type lignin units were preferentially produced during the development of compression wood tracheids. We propose that, not only the spatial localisation of laccases, but also their biochemical characteristics dictate the spatial patterning of lignin polymerisation in gymnosperm compression wood.

Nonlinear buckling behavior of a complete spherical shell under uniform external pressure and homogenous natural curvature

In this work, we consider the stability of a spherical shell under combined loading from a uniform external pressure and a homogenous natural curvature. Nonmechanical stimuli, such as one that tends to modify the rest curvature of an elastic body, are prevalent in a wide range of natural and engineered systems, and may occur due to thermal expansion, changes in pH, differential swelling, and differential growth. Here we investigate how the presence of both an evolving natural curvature and an external pressure modifies the stability of a complete spherical shell. We show that due to a mechanical analogy between pressure and curvature, positive natural curvatures can severely destabilize a thin shell, while negative natural curvatures can strengthen the shell against buckling, providing the possibility to design shells that buckle at or above the theoretical limit for pressure alone, i.e., a strengthening factor. These results extend directly from the classical analysis of the stability of shells under pressure, and highlight the important role that nonmechanical stimuli can have on modifying the membrane state of stress in a thin shell.

Posture control in land plants: growth, position sensing, proprioception, balance, and elasticity

The colonization of the atmosphere by land plants was a major evolutionary step. The mechanisms that allow for vertical growth through air and the establishment and control of a stable erect habit are just starting to be understood. A key mechanism was found to be continuous posture control to counterbalance the mechanical and developmental challenges of maintaining a growing upright structure. An interdisciplinary systems biology approach was invaluable in understanding the underlying principles and in designing pertinent experiments. Since this discovery previously held views of gravitropic perception had to be reexamined and this has led to the description of proprioception in plants. In this review, we take a purposefully pedagogical approach to present the dynamics involved from the cellular to whole-plant level. We show how the textbook model of how plants sense gravitational force has been replaced by a model of position sensing, a clinometer mechanism that involves both passive avalanches and active motion of statoliths, granular starch-filled plastids, in statocytes. Moreover, there is a transmission of information between statocytes and other specialized cells that sense the degree of organ curvature and reset asymmetric growth to straighten and realign the structure. We give an overview of how plants have used the interplay of active posture control and elastic sagging to generate a whole range of spatial displays during their life cycles. Finally, a position-integrating mechanism has been discovered that prevents directional plant growth from being disrupted by wind-induced oscillations.

Growing cell walls show a gradient of elastic strain across their layers

The relatively thick primary walls of epidermal and collenchyma cells often form waviness on the surface that faces the protoplast when they are released from the tensile in-plane stress that operates in situ. This waviness is a manifestation of buckling that results from the heterogeneity of the elastic strain across the wall. In this study, this heterogeneity was confirmed by the spontaneous bending of isolated wall fragments that were initially flat. We combined the empirical data on the formation of waviness in growing cell walls with computations of the buckled wall shapes. We chose cylindrical-shaped organs with a high degree of longitudinal tissue stress because in such organs the surface deformation that accompanies the removal of the stress is strongly anisotropic and leads to the formation of waviness in which wrinkles on the inner wall surface are always transverse to the organ axis. The computations showed that the strain heterogeneity results from individual or overlaid gradients of pre-stress and stiffness across the wall. The computed wall shapes depend on the assumed wall thickness and mechanical gradients. Thus, a quantitative analysis of the wall waviness that forms after stress removal can be used to assess the mechanical heterogeneity of the cell wall.

In Memoriam: Zygmunt Hejnowicz (1929-2016)

Professor Zygmunt Hejnowicz passed away aged 87, on the first of May 2016. We describe his major research interests and contribution to plant development, anatomy, and biophysics, from the perspective of his close collaborators.

Are trichomes involved in the biomechanical systems of Cucurbita leaf petioles?

Trichomes are involved in petiole movement and likely function as a part of the plant biomechanical system serving as an additional reservoir of hydrostatic pressure. The large, non-glandular trichomes on Cucurbita petioles occur across collenchyma strands. Time-lapse imaging was used to study the leaf reorientation of Cucurbita maxima 'Bambino' plants placed in horizontal position. The experiment comprised four variants of the large non-glandular petiole trichomes: (1) intact, (2) mechanically removed, (3) dehydrated, and (4) intact but with longitudinally injured petioles. Isolated strands of collenchyma with intact epidermis or epidermis mechanically removed from the abaxial and adaxial sides of the petiole were subjected to breaking test. The stiffness of the non-isolated tissue with intact epidermis was measured using the micro-indentation method. Petioles without trichomes did not exhibit tropic response, and the dehydration of trichomes slowed and prevented complete leaf reorientation. Isolated strands of collenchyma showed no correlation between strength values and position on the petiole. However, strands of collenchyma with epidermis exhibited a significantly greater strength regardless of their position on the petiole. The indentation test showed that non-isolated collenchyma is stiffer on the abaxial side of the petiole. Trichomes from the abaxial side of the petiole were larger at their base. The application of the 'tensile triangles method' revealed that these trichomes had a biomechanically optimized shape in comparison to the adaxial side. We conclude that trichomes can be involved in plant biomechanical system and serve as an additional reservoir of hydrostatic pressure that is necessary for maintaining petioles in the prestressed state.

Form matters: morphological aspects of lateral root development

BACKGROUND

The crucial role of roots in plant nutrition, and consequently in plant productivity, is a strong motivation to study the growth and functioning of various aspects of the root system. Numerous studies on lateral roots, as a major determinant of the root system architecture, mostly focus on the physiological and molecular bases of developmental processes. Unfortunately, little attention is paid either to the morphological changes accompanying the formation of a lateral root or to morphological defects occurring in lateral root primordia. The latter are observed in some mutants and occasionally in wild-type plants, but may also result from application of external factors.

SCOPE AND CONCLUSIONS

In this review various morphological aspects of lateral branching in roots are analysed. Morphological events occurring during the formation of a typical lateral root are described. This process involves dramatic changes in the geometry of the developing organ that at early stages are associated with oblique cell divisions, leading to breaking of the symmetry of the cell pattern. Several types of defects in the morphology of primordia are indicated and described. Computer simulations show that some of these defects may result from an unstable field of growth rates. Significant changes in both primary and lateral root morphology may also be a consequence of various mutations, some of which are auxin-related. Examples reported in the literature are considered. Finally, lateral root formation is discussed in terms of mechanics. In this approach the primordium is considered as a physical object undergoing deformation and is characterized by specific mechanical properties.

Mechanical control of morphogenesis at the shoot apex

Morphogenesis does not just require the correct expression of patterning genes; these genes must induce the precise mechanical changes necessary to produce a new form. Mechanical characterization of plant growth is not new; however, in recent years, new technologies and interdisciplinary collaborations have made it feasible in young tissues such as the shoot apex. Analysis of tissues where active growth and developmental patterning are taking place has revealed biologically significant variability in mechanical properties and has even suggested that mechanical changes in the tissue can feed back to direct morphogenesis. Here, an overview is given of the current understanding of the mechanical dynamics and its influence on cellular and developmental processes in the shoot apex. We are only starting to uncover the mechanical basis of morphogenesis, and many exciting questions remain to be answered.

Integrative biomechanics for tree ecology: beyond wood density and strength

Functional ecology has long considered the support function as important, but its biomechanical complexity is only just being elucidated. We show here that it can be described on the basis of four biomechanical traits, two safety traits against winds and self-buckling, and two motricity traits involved in sustaining an upright position, tropic motion velocity (MV) and posture control (PC). All these traits are integrated at the tree scale, combining tree size and shape together with wood properties. The assumption of trait constancy has been used to derive allometric scaling laws, but it was more recently found that observing their variations among environments and functional groups, or during ontogeny, provides more insights into adaptive syndromes of tree shape and wood properties. However, oversimplified expressions have often been used, possibly concealing key adaptive drivers. An extreme case of oversimplification is the use of wood basic density as a proxy for safety. Actually, as wood density is involved in stiffness, loads, and construction costs, the impact of its variations on safety is non-trivial. Moreover, other wood features, especially the microfibril angle (MFA), are also involved. Furthermore, wood is not only stiff and strong, but it also acts as a motor for MV and PC. The relevant wood trait for this is maturation strain asymmetry. Maturation strains vary with cell-wall characteristics such as MFA, rather than with wood density. Finally, the need for further studies about the ecological relevance of branching patterns, motricity traits, and growth responses to mechanical loads is discussed.

ACC oxidase genes expressed in the wood-forming tissues of loblolly pine (Pinus taeda L.) include a pair of nearly identical paralogs (NIPs)

1-Aminocyclopropane-1-carboxylate (ACC) oxidase catalyzes the final reaction of the ethylene biosynthetic pathway, converting the unusual cyclic amino acid, ACC, into ethylene. Past studies have shown a possible link between ethylene and compression wood formation in conifers, but the relationship has received no more than modest study at the gene expression level. In this study, a cDNA clone encoding a putative ACC oxidase, PtACO1, was isolated from a cDNA library produced using mRNA from lignifying xylem of loblolly pine (Pinus taeda) trunk wood. The cDNA clone comprised an open reading frame of 1461 bp encoding a protein of 333 amino acids. Using PCR amplification techniques, a genomic clone corresponding to PtACO1 was isolated and shown to contain three introns with typical GT/AG boundaries defining the splice junctions. The PtACO1 gene product shared 70% identity with an ACC oxidase from European white birch (Betula pendula), and phylogenetic analyses clearly placed the gene product in the ACC oxidase cluster of the Arabidopsis thaliana 2-oxoglutarate-dependent dioxygenase superfamily tree. The PtACO1 sequence was used to identify additional ACC oxidase clones from loblolly pine root cDNA libraries characterized as part of an expressed sequence tag (EST) discovery project. The PtACO1 sequence was also used to recover additional paralogous sequences from genomic DNA, one of which (PtACO2) turned out to be >98% identical to PtACO1 in the nucleotide coding sequence, leading to its classification as a "nearly identical paralog" (NIP). Quantitative PCR analyses showed that the expression level of PtACO1-like transcripts varied in different tissues, as well as in response to hormonal treatments and bending. Possible roles for PtACO1 in compression wood formation in loblolly pine and the discovery of its NIP are discussed in light of these results.

The mechanics behind plant development

Morphogenesis in living organisms relies on the integration of both biochemical and mechanical signals. During the last decade, attention has been mainly focused on the role of biochemical signals in patterning and morphogenesis, leaving the contribution of mechanics largely unexplored. Fortunately, the development of new tools and approaches has made it possible to re-examine these processes. In plants, shape is defined by two local variables: growth rate and growth direction. At the level of the cell, these variables depend on both the cell wall and turgor pressure. Multidisciplinary approaches have been used to understand how these cellular processes are integrated in the growing tissues. These include quantitative live imaging to measure growth rate and direction in tissues with cellular resolution. In parallel, stress patterns have been artificially modified and their impact on strain and cell behavior been analysed. Importantly, computational models based on analogies with continuum mechanics systems have been useful in interpreting the results. In this review, we will discuss these issues focusing on the shoot apical meristem, a population of stem cells that is responsible for the initiation of the aerial organs of the plant.

Differential growth and residual stress in cylindrical elastic structures

Cylindrical forms are among one of Nature's fundamental building blocks. They serve many different purposes, from sustaining body weight to carrying flows. Their mechanical properties are generated through the often complex arrangements of the walls. In particular, in many structures that have elastic responses, such as stems and arteries, the walls are in a state of tension generated by differential growth. Here, the effect of differential growth and residual stress on the overall mechanical response of the cylindrical structure is studied within the framework of morpho-elasticity.

Universal foliage-stem scaling across environments and species in dicot trees: plasticity, biomechanics and Corner's Rules

Trees range from small-leaved, intricately branched species with slender stems to large-leaved, coarsely branched ones with thick stems. We suggest a mechanism for this pattern, known as Corner's Rules, based on universal scaling. We show similar crown area-stem diameter scaling between trunks and branches, environments, and species spanning a wide range of leaf size and stem biomechanics. If crown and stem maintain metabolically driven proportionality, but similar amounts of photosynthates are produced per unit crown area, then the greater leaf spacing in large-leaved species requires lower density stem tissue and, meeting mechanical needs, thicker stems. Congruent with this scenario, we show a negative relationship between leaf size and stem Young's modulus. Corner's Rules emerge from these mutual adjustments, which suggest that adaptive studies cannot consider any of these features independently. The constancy of scaling despite environmental challenges identifies this trait constellation as a crucial axis of plant diversification.

The power and control of gravitropic movements in plants: a biomechanical and systems biology view

The study of gravitropic movements in plants has enjoyed a long history of research going back to the pioneering works of the 19th century and the famous book entitled 'The power of movement in plants' by Charles and Francis Darwin. Over the last few decades, the emphasis has shifted towards the cellular and molecular biology of gravisensing and the onset of auxin gradients across the organs. However, our understanding of plant movement cannot be completed before quantifying spatio-temporal changes in curvature and how they are produced through the motor process of active bending and controlled by gravisensing. This review sets out to show how combining approaches borrowed from continuum mechanics (kinematic imaging, structural modelling) with approaches from physiology and modern molecular biology has made it possible to generate integrative biomechanical models of the processes involved in gravitropism at several levels. The physiological and biomechanical bases are reviewed and two of the most complete integrative models of the gravireaction organ available are then compared, highlighting how the comparison between movements driven by differential growth and movements driven by reaction wood formation in woody organs has provided highly informative key insights. The advantages of these models as tools for analysing genetic control through quantitative process-based phenotyping as well as for identifying target traits for ecological studies are discussed. It is argued that such models are tools for a systems biology approach to gravitropic movement that has the potential to resolve at least some of the research questions raised 150 years ago.

Suppression of 4-coumarate-CoA ligase in the coniferous gymnosperm Pinus radiata

Severe suppression of 4-coumarate-coenzyme A ligase (4CL) in the coniferous gymnosperm Pinus radiata substantially affected plant phenotype and resulted in dwarfed plants with a "bonsai tree-like" appearance. Microscopic analyses of stem sections from 2-year-old plants revealed substantial morphological changes in both wood and bark tissues. This included the formation of weakly lignified tracheids that displayed signs of collapse and the development of circumferential bands of axial parenchyma. Acetyl bromide-soluble lignin assays and proton nuclear magnetic resonance studies revealed lignin reductions of 36% to 50% in the most severely affected transgenic plants. Two-dimensional nuclear magnetic resonance and pyrolysis-gas chromatography-mass spectrometry studies indicated that lignin reductions were mainly due to depletion of guaiacyl but not p-hydroxyphenyl lignin. 4CL silencing also caused modifications in the lignin interunit linkage distribution, including elevated beta-aryl ether (beta-O-4 unit) and spirodienone (beta-1) levels, accompanied by lower phenylcoumaran (beta-5), resinol (beta-beta), and dibenzodioxocin (5-5/beta-O-4) levels. A sharp depletion in the level of saturated (dihydroconiferyl alcohol) end groups was also observed. Severe suppression of 4CL also affected carbohydrate metabolism. Most obvious was an up to approximately 2-fold increase in galactose content in wood from transgenic plants due to increased compression wood formation. The molecular, anatomical, and analytical data verified that the isolated 4CL clone is associated with lignin biosynthesis and illustrated that 4CL silencing leads to complex, often surprising, physiological and morphological changes in P. radiata.

Functional diversity in gravitropic reaction among tropical seedlings in relation to ecological and developmental traits

Gravitropism is necessary for plants to control the orientation of their axes while they grow in height. In woody plants, stem re-orientations are costly because they are achieved through diameter growth. The functional diversity of gravitropism was studied to check if the mechanisms involved and their efficiency may contribute to the differentiation of height growth strategies between forest tree species at the seedling stage. Seedlings of eight tropical species were grown tilted in a greenhouse, and their up-righting movement and diameter growth were measured over three months. Morphological, anatomical, and biomechanical traits were measured at the end of the survey. Curvature analysis was used to analyse the up-righting response along the stems. Variations in stem curvature depend on diameter growth, size effects, the increase in self-weight, and the efficiency of the gravitropic reaction. A biomechanical model was used to separate these contributions. Results showed that (i) gravitropic movements were based on a common mechanism associated to similar dynamic patterns, (ii) clear differences in efficiency (defined as the change in curvature achieved during an elementary diameter increment for a given stem diameter) existed between species, (iii) the equilibrium angle of the stem and the anatomical characters associated with the efficiency of the reaction also differed between species, and (iv) the differences in gravitropic reaction were related to the light requirements: heliophilic species, compared to more shade-tolerant species, had a larger efficiency and an equilibrium angle closer to vertical. This suggests that traits determining the gravitropic reaction are related to the strategy of light interception and may contribute to the differentiation of ecological strategies promoting the maintenance of biodiversity in tropical rainforests.

Xyloglucan: the molecular muscle of trees

BACKGROUND

Tension wood evolved in woody angiosperms to allow stems with secondary thickening to bend and thus maintain an optimal orientation. Stem bending is the result of longitudinal tensile stress that develops in tension wood tissues. In many species, a specialized secondary cell wall layer, the so-called gelatinous (G)-layer, develops, containing longitudinally orientated crystalline cellulose fibrils; these have been recently shown to generate the tensile stress by an unknown mechanism. The cellulose fibrils cannot, however, work in isolation. Both coherence between the fibrils and adherence of the G-layer to the adjacent cell wall layers are required to transfer the tensile stresses of the cellulose fibrils to the tissue. Previous work had not identified hemicelluloses within the G-layer.

RECENT PROGRESS

Sugar composition and polysaccharide linkage analyses of pure G-layers isolated by sonication have recently identified xyloglucan as the main non-cellulosic component of the G-layer. Xyloglucan has been detected by immunolabelling with the CCRC-M1 monoclonal antibody and by in-situ activity assays using XXXG-sulforhodamine substrate in the developing G-layers but not in the mature ones. However, xyloglucan endotransglucosylase/hydrolase (XTH) proteins persist in the G-layer for several years and the corresponding xyloglucan endotransglucosylase (XET) activity (EC 2.4.1.207) occurs in the adjacent layers. Correspondingly, several XTH-encoding transcripts were found to be up-regulated in developing tension wood compared with normal wood.

SCOPE

We propose that, during cellulose crystallization, a part of the xyloglucan is trapped inside the crystal, inducing longitudinal tensile stress within it; another part of it is accessible and present between the G-layer and the outer wall layers. XET activity that occurs persistently in the G-fibres maintains coherence between the G-layer and the adjacent secondary wall layers. It is postulated that these activities are essential for generation of tensile stress during fibre maturation in tension wood.

Characterization of a 1-aminocyclopropane-1-carboxylate synthase gene from loblolly pine (Pinus taeda L.)

1-Aminocyclopropane-1-carboxylate (ACC) synthase catalyzes what is typically the rate-limiting step in the biosynthesis of ethylene, a gaseous plant growth regulator that plays numerous roles in the growth and development of higher plants. Although ACC synthase genes have been characterized from a wide variety of angiosperm plant species, no ACC synthase genes have been described previously for gymnosperms. Evidence suggests that ethylene helps to regulate wood formation in trees, and may also signal for the metabolic shifts that lead to compression wood formation on the undersides of branches and leaning stems in gymnosperm trees. Since compression wood is an inferior feedstock for the manufacturing of most wood products, a better understanding of the factors influencing its formation could lead to substantial economic benefits. This study describes the isolation and characterization of a putative ACC synthase gene, PtaACS1, from loblolly pine (Pinus taeda L.), an important commercial forest tree species. Also described is an apparent splice variant of PtaACS1 (PtaACS1s) that is missing 138 bp from the 5' end of the transcript, including bases that encode a conserved amino acid residue considered critical for ACC synthase activity. The two sequences share interesting homologies with a group of plant aminotransferases, in addition to ACC synthases, but structural models and the conservation of critical catalytic amino acid residues strongly support PtaACS1 as encoding an active ACC synthase. The two transcripts were differentially expressed in various tissues of loblolly pine, as well as in response to perturbations of pine seedling stems. Transcript levels of this ACC synthase gene increased rapidly in response to bending stress but returned to near starting levels within 30 min. It remains unclear to what extent bending-induced expression of this gene product plays a role in compression wood formation.

The epidermal-growth-control theory of stem elongation: an old and a new perspective

The botanist G. Kraus postulated in 1867 that the peripheral cell layers determine the rate of organ elongation based on the observation that the separated outer and inner tissues of growing stems spontaneously change their lengths upon isolation from each other. Here, we summarize the modern version of this classical concept, the "epidermal-growth-control" or "tensile skin" theory of stem elongation. First, we present newly acquired data from sunflower hypocotyls, which demonstrate that the expansion of the isolated inner tissues is not an experimental artefact, as recently claimed, but rather the result of metabolism-independent cell elongation caused by the removal of the growth-controlling peripheral walls. Second, we present data showing that auxin-induced elongation of excised stem segments is attributable to the loosening of the thick epidermal walls, which provides additional evidence for the "epidermal-growth-control concept". Third, we show that the cuticle of aerial organs can be thin and mechanically weak in seedlings raised at high humidity, but thick and mechanically important for organs growing under relatively dry air conditions. Finally, we present a modified model of the "tensile skin-theory" that draws attention to the mechanical and physiological roles of (a) the thickened, helicoidal outer cell walls, (b) the mechanical constraint of a cuticle, and (c) the interactions among outer and inner cell layers as growth is coordinated by hormonal signals.

Xyloglucan endo-transglycosylase (XET) functions in gelatinous layers of tension wood fibers in poplar--a glimpse into the mechanism of the balancing act of trees

Tension wood is a specialized tissue of deciduous trees that functions in bending woody stems to optimize their position in space. Tension wood fibers that develop on one side of the stem have an increased potency to shrink compared with fibers on the opposite side, thus creating a bending moment. It is believed that the gelatinous (G) cell wall layer containing almost pure cellulose of tension wood fibers is pivotal to their shrinking. By analyzing saccharide composition and linkage in isolated G-layers of poplar, we found that they contain some matrix components in addition to cellulose, of which xyloglucan is the most abundant. Xyloglucan, xyloglucan endo-transglycosylase (XET) activity and xyloglucan endo-transglycosylase/hydrolase (XTH) gene products were detected in developing G-layers by labeling using CCRC-M1 monoclonal antibody, in situ incorporation of XXXG-SR and the polyclonal antibody to poplar PttXET16-34, respectively, indicating that xyloglucan is incorporated into the G-layer during its development. Moreover, several XTH transcripts were altered and were generally up-regulated in developing tension wood compared with normal wood. In mature G-fibers, XTH gene products were detected in the G-layers while the XET activity was evident in the adjacent S(2) wall layer. We propose that XET activity is essential for G-fiber shrinking by repairing xyloglucan cross-links between G- and S(2)-layers and thus maintaining their contact. Surprisingly, XTH gene products and XET activity persisted in mature G-fibers for several years, suggesting that the enzyme functions after cell death repairing the cross-links as they are being broken during the shrinking process.

Phototropic bending of non-elongating and radially growing woody stems results from asymmetrical xylem formation

Active phototropic bending of non-elongating and radially growing portion of stems (woody stems) has not been previously documented, whereas negative gravitropic bending is well known. We found phototropic bending in woody stems and searched for the underlying mechanism. We inclined 1-year-old Quercus crispula Blume seedlings and unilaterally illuminated them from a horizontal direction perpendicular to ('normal' illumination) or parallel to ('parallel' illumination) the inclination azimuth. With normal illumination, active phototropic bending and xylem formation could be evaluated separately from the negative gravitropic response and vertical deflection resulting from the weight of the seedlings. One-year-old stems with normal illumination bent significantly, with asymmetrical xylem formation towards the illuminated upper surface and side of the stem, whereas those with parallel illumination showed non-significant lateral bending, with asymmetrical xylem formation only on the upper side. A mechanical model was built on the assumption that a bending moment resulted from the asymmetrical xylem formation during phototropic bending of the woody stems. The model fitted the relationship between the observed spatial distributions of the xylem and the observed lateral bending, and thus supported the hypothesis that phototropic bending of woody stems results from asymmetrical xylem formation, as such occurs during gravitropism.

Stem-righting mechanism in gymnosperm trees deduced from limitations in compression wood development

BACKGROUND AND AIMS

In response to inclination stimuli, gymnosperm trees undergo corrective growth during which compression wood develops on the lower side of the inclined stem. High compressive growth stress is generated in the compression wood region and is an important factor in righting the stem. The aims of the study were to elucidate how the generation of compressive growth stress in the compression wood region is involved in the righting response and thus to determine a righting mechanism for tree saplings.

METHODS

Cryptomeria japonica saplings were grown at inclinations of 0 degrees (vertical) to 50 degrees. At each inclination angle, the growth stress on the lower side of the inclined stem was investigated, together with the degree of compression-wood development such as the width of the current growth layer and lignin content, and the upward bending moment.

KEY RESULTS

Growth stress, the degree of compression wood development, and the upward moment grew as the stem inclination angle increased from 0 to 30 degrees, but did not rise further at inclinations > 30 degrees.

CONCLUSIONS

The results suggest the following righting mechanism for gymnosperm saplings. As the stem inclination is elevated from 0 to 30 degrees, the degree of compression wood development increases to force the sapling back to its original orientation; at inclinations > 30 degrees, the maximum degree of compression wood is formed and additional time is needed for the stem to reorient itself.

Gravity: one of the driving forces for evolution

Mechanical load is 10(3) larger for land-living than for water-living organisms. As a consequence, antigravitational material in form of compound materials like lignified cell walls in plants and mineralised bones in animals occurs in land-living organisms preferentially. Besides cellulose, pectic substances of plant cell walls seem to function as antigravitational material in early phases of plant evolution and development. A testable hypothesis including vesicular recycling processes into the tensegrity concept is proposed for both sensing of gravitational force and responding by production of antigravitational material at the cellular level.

Autonomous changes in the orientation of cortical microtubules underlying the helicoidal cell wall of the sunflower hypocotyl epidermis: spatial variation translated into temporal changes

Angles (lambda) at which parallel cortical microtubules (cMTs) were oriented with respect to the longitudinal direction were measured in Helianthus annuus hypocotyl epidermal cells. Histograms showing lambda frequencies in cell populations at the instant of epidermis fixation were obtained. Analysis of the histograms indicates that, in a particular position within a cell, the angle lambda changes periodically with time, i.e., there is a cycle of lambda change at that position. This cycle is most likely rotational rather than oscillatory, i.e., the change in lambda has a defined chirality (clockwise or counterclockwise). The full diversity of histograms can be consistently explained by rotational cycles with a variable velocity of lambda change, and with a cMT rebuilding stage taking place at a different phase of the cycle. The rotational cycles also provide the simplest explanation of cMT arrays in which the angle lambda changes along a cell (fixed) and no parallel orientation of cMTs is apparent at a certain position. This explanation assumes a gradient in the phase of the rotational cycle along the cell. The symmetry of the angular characteristics of the rotational cycle, with respect to the morphological directions in cells, leads to the concept that these directions typically represent the principal directions of a certain tensor quantity, which may control the cycling. Possible interactions between the rotational cycle of cMT reorientation and the helicoidal cycle during cell wall formation are discussed.

Buckling of inner cell wall layers after manipulations to reduce tensile stress: observations and interpretations for stress transmission

The inner layer of the cell wall in tissues that are under tensile stress in situ, e.g. epidermis and collenchyma of etiolated sunflower hypocotyls, shows a pattern of transverse folds when the tissues are detached and plasmolysed. This can be observed by Nomarski imaging of inner surfaces of the outer cell walls and electron microscopy of longitudinal sections after peeling the epidermis and bathing it in plasmolysing solutions. The folds are apparently caused by buckling of the inner layer due to the longitudinal compressive force exerted on this layer by the outer wall layer, when it shrinks after the removal of the longitudinal tensile stresses. In these stresses, two components can be distinguished: the tissue stress, disappearing on peeling, and that caused directly by turgor pressure, disappearing in hyperosmotic solution. Investigation of the buckling indicates that the outer layer of the cell wall transmits in situ most of the longitudinal tensile stress in the wall. The common concept that the inner layer of the wall is the region bearing most stress and therefore regulating growth can still be valid with respect to the transverse stress component.

Are xylem radial development and hydraulic conductivity in downwardly-growing grapevine shoots influenced by perturbed auxin metabolism?

Downwardly-growing grapevine shoots have smaller and more frequent vessels than upwardly-growing ones and, as a consequence, a lower hydraulic conductivity. Here, grapevine (Vitis vinifera L.) shoot growth orientation was manipulated to test whether downward shoot orientation negatively affects vessel growth in the apex via a shortage of water and nutrients. The orientation of the central vine shoot portion was inverted by two consecutive 135 degrees bends, resulting in double-bent N-shaped vines; the central downward shoot portion was of different lengths in the experimental treatments to induce increasing reductions of shoot conductivity. These treatments reduced shoot conductivity and water flow, but had no effects on vessel development and frequency in the apex. In a second experiment, auxin concentration was assessed in shoots of upwardly- and downwardly-growing plants. IAA concentration at the apical internodes was higher in downwardly-oriented shoots than in shoots growing upwards. In addition, a higher density and a lower vessel diameter were observed in the lower, than the upper side, of the downwardly-oriented shoot, suggesting increased accumulation of auxin in the lower side. These results suggest that the downward orientation induces accumulation of auxin in the apex, which in turn affects the density and the size of the xylem vessels, causing reduction of hydraulic conductivity.

Transcription profiling of the early gravitropic response in Arabidopsis using high-density oligonucleotide probe microarrays

Studies of plant tropisms, the directed growth toward or away from external stimuli such as light and gravity, began more than a century ago. Yet biochemical, physiological, and especially molecular mechanisms of plant tropic responses remain for the most part unclear. We examined expression of 8,300 genes during early stages of the gravitropic response using high-density oligonucleotide probe microarrays. Approximately 1.7% of the genes represented on the array exhibited significant expression changes within the first 30 min of gravity stimulation. Among gravity-induced genes were a number of genes previously implicated to be involved in gravitropism. However, a much larger number of the identified genes have not been previously associated with gravitropism. Because reorientation of plants may also expose plants to mechanical perturbations, we also compared the effects of a gentle mechanical perturbation on mRNA levels during the gravity response. It was found that approximately 39% of apparently gravity-regulated genes were also regulated by the mechanical perturbation caused by plant reorientation. Our study revealed the induction of complex gene expression patterns as a consequence of gravitropic reorientation and points to an interplay between the gravitropic and mechanical responses and to the extreme sensitivity of plants to even very gentle mechanical perturbations.

Gravitropism of axial organs in multicellular plants

Gravitropism of plant organs such as roots, stems and coleoptiles can be separated into four distinct phases: 1. perception (gravity sensing), 2. transduction of a signal into the target region and 3. the response (differential growth). This last reaction is followed by a straightening of the curved organ (4.). The perception of the gravitropic stimulus upon horizontal positioning of the organ (1.) occurs via amyloplasts that sediment within the statocytes. This conclusion is supported by our finding that submerged rice coleoptiles that lack sedimentable amyloplasts show no graviresponse. The mode of signal transduction (2.) from the statocytes to the peripheral cell layers is still unknown. Differential growth (3.) consists of a cessation of cell expansion on the upper side and an enhancement of elongation on the lower side of the organ. Based on the facts that the sturdy outer epidermal wall (OEW) constitutes the growth-controlling structure of the coleoptile and that growth-related osmiophilic particles accumulate on the upper OEW, it is concluded that the differential incorporation of wall material (presumably glycoproteins) is causally involved. During gravitropic bending, electron-dense particles ('wall-loosening capacity') accumulate on the growth-inhibited upper OEW. It is proposed that the autotropic straightening response, which is in part due to an acceleration of cell elongation on the curved upper side, may be attributable to an incorporation of the accumulated particles ('release of wall-loosening capacity'). This novel mechanism of autotropic re-bending and its implications for the Cholodny-Went hypothesis are discussed.

Sedimentable amyloplasts in starch sheath cells of woody stems of Japanese cherry

We examined whether sedimentable amyloplasts act as statolith in the perception of gravity in woody stems using the elongated internodes of Japanese cherry (Prunus jamasakura Sieb. ex Koidz.). In the internode of the seedlings grown on earth, amyloplasts were found sedimented at the distal end of each cell of the endodermal starch sheath tissue. In the internode grown on three-dimensional (3-D) clinostat, amyloplasts were dispersed throughout the cell matrix in the endodermal starch sheath tissue. After changing the positions of the internode from vertical to horizontal, re-sedimentation of amyloplasts toward the direction of gravity was completed in 1h, whereas the bending of the internode was observed after 12 days. We propose that sedimentable amyloplasts in the endodermal starch sheath cells may play a role in gravity perception leading to secondary xylem formation in the secondary thickening growth and eccentric growth in gravi-bending of tree stems.

The mechanic state of "inner tissue" in the growing zone of sunflower hypocotyls and the regulation of its growth rate following excision

Spontaneous growth of isolated inner tissue from the etiolated sunflower (Helianthus annuus L.) hypocotyl growing zone was investigated. A new preparation technique allowed measurements starting 3 s after excision. Elongation with respect to the turgescent and plasmolized state was quantified in terms of relative growth rates, facilitating comparison to growth in situ. Turgor and turgor-induced strain were determined. Overall longitudinal strain in inner tissues in situ was positive, indicating that compressive forces exerted by peripheral tissues are outweighed by turgor-dependent tensile stress. Inner tissue expansion following isolation depended on water uptake. Extreme plastic extension rates occurred immediately after excision, suggesting that mechanical parameters of inner tissue in situ cannot be extrapolated from the mechanics of excised sections. In the long term, excised inner tissue autonomously established values of turgor, turgor-induced strain, and relative growth rates similar to values in the living plant. These results support historic models of tissue cooperation during organ growth, in which inner tissues actively participate in the control of growth rates.

Shoot orientation affects vessel size, shoot hydraulic conductivity and shoot growth rate in Vitis vinifera L

Vitis vinifera L. plants were grown in containers and each plant's single shoot was orientated upwards or downwards. Some plants were trained first upwards, then downwards, then again upwards (N-shaped plants). Vegetative growth was reduced in plants trained downwards compared to that in upward and N-shaped plants. Shoot growth rate slowed in downward shoot portions, but only after the apex had grown downwards for at least 10 internodes. Shoot hydraulic conductivity kh, measured after elimination of xylem embolisms, was lower in downward than in upward plants. In N-shaped plants kh was higher in the upward-growing shoot portions, and lower in the central, downward-growing portion. Shoot- and leaf-specific conductivities were also lower in downward than in upward shoot portions. Xylem cross-sectional area and xylem structure (number of wedges, number of vessels per unit xylem area) differed little in the three orientations. In contrast, vessel diameter and the sum of vessel cross-sectional areas were significantly smaller in downward than in upward shoot portions. These differences could explain the reduction in conductivity observed in the downward-orientated shoot portions. The measurements taken on N-shaped plants showed that the decreases in kh and in vessel size were a result of shoot orientation, not shoot bending.

Gravisensing in plants and fungi

The principle of establishing and maintaining a gravitropic set point angle depends on gravisensing and a subsequent cascade of events that result in differential elongation of the responsive structures. Since gravity acts upon masses, the gravisensing mechanisms of all biological systems must follow the same principle, namely the sensing of some force due to differential acceleration of the perceiving entity and a reference structure. This presentation will demonstrate that gravisensing can be accomplished by various means, ranging from cytoskeletal organization, mechano-elastic stress to perturbation of electric signals. However, several arguments indicate that sedimentation of either dense plastids (statoliths), the entire protoplast, or a combination of these represents the primary step in graviperception in plants. In fungi, nuclei and cytoskeletal proteins are believed to form a network capable of gravisensing but sedimenting organelles that may function as statoliths have been identified. Theoretical and practical limitations of gravisensing and detection of acceleration forces necessitate microgravity experiments to identify the primary perceptor, subsequent biochemical mechano-transduction, and biological response processes.