Removal and Biodegradation of Phenanthrene, Fluoranthene and Pyrene by the Marine Algae Rhodomonas baltica Enriched from North Atlantic Coasts

The impact of various forms of silver nanoparticles on the rhizosphere of wheat (Triticum aestivum L.) - Shifts in microbiome structure and predicted microbial metabolic functions

The study investigated the effects of different silver nanoparticles (AgNPs) on the soil microbiome and wheat growth. For comparison purposes, a commercial fungicide and silver nitrate (AgNO3) were used. The results revealed three distinct groups of nanoparticles based on their impacts. Small-size AgNPs (10 nm) with a negative charge, as well as fungicide had limited effects on the microbiome, similar to the no-treatment control. Bigger in size (30-60 nm) and a negative charge AgNPs showed the most beneficial effects on soil microbiota shifts. These AgNPs increased the abundance of bacteria with beneficial traits such as nitrogen-fixing, urease, protease, and lignin degradation bacteria. The third type of AgNPs had a positive charge of nanostructure and influenced specific microbial populations, increasing the abundance of anaerobic and autotrophic groups of microorganisms, which could be assessed as a harmful shift for plants growth promotions and was similar to the AgNO3 treatment. Overall, the study emphasized the potential of AgNPs in agriculture not only as biocidal. The conducted study proved that AgNPs with bigger size/negative charge, used in low concentration can have a surprisingly stimulating effect on the positive characteristics of the rhizosphere microbiome. Moreover, the surface charge of AgNPs is a significant factor affecting microbial activity of wheat rhizosphere soil, which in this treatment is significantly similar to the AgNO3 treatment.

Biodegradation mechanisms of polycyclic aromatic hydrocarbons: Combination of instrumental analysis and theoretical calculation

Polycyclic aromatic hydrocarbons (PAHs) are a common class of petroleum hydrocarbons, widely encountered in both environment and industrial pollution sources. Owing to their toxicity, environmental persistence, and potential bioaccumulation properties, a mounting interest has been kindled in addressing the remediation of PAHs. Biodegradation is widely employed for the removal and remediation of PAHs due to its low cost, lack of second-contamination and ease of operation. This paper reviews the degradation efficiency of degradation and the underlying mechanisms exhibited by algae, bacteria, and fungi in remediation. Additionally, it delved into the application of modern instrumental analysis techniques and theoretical investigations in the realm of PAH degradation. Advanced instrumental analysis methods such as mass spectrometry provide a powerful tool for identifying intermediates and metabolites throughout the degradation process. Meanwhile, theoretical calculations could guide the optimization of degradation processes by revealing the reaction mechanisms and energy changes in PAH degradation. The combined use of instrumental analysis and theoretical calculations allows for a comprehensive understanding of the degradation mechanisms of PAHs and provides new insights and approaches for the development of environmental remediation technologies.

Removal of organic and inorganic contaminants from the air, soil, and water by algae

Rapid increases in human populations and development has led to a significant exploitation of natural resources around the world. On the other hand, humans have come to terms with the consequences of their past mistakes and started to address current and future resource utilization challenges. Today's primary challenge is figuring out and implementing eco-friendly, inexpensive, and innovative solutions for conservation issues such as environmental pollution, carbon neutrality, and manufacturing effluent/wastewater treatment, along with xenobiotic contamination of the natural ecosystem. One of the most promising approaches to reduce the environmental contamination load is the utilization of algae for bioremediation. Owing to their significant biosorption capacity to deactivate hazardous chemicals, macro-/microalgae are among the primary microorganisms that can be utilized for phytoremediation as a safe method for curtailing environmental pollution. In recent years, the use of algae to overcome environmental problems has advanced technologically, such as through synthetic biology and high-throughput phenomics, which is increasing the likelihood of attaining sustainability. As the research progresses, there is a promise for a greener future and the preservation of healthy ecosystems by using algae. They might act as a valuable tool in creating new products.

A critical insight into occurrence and fate of polycyclic aromatic hydrocarbons and their green remediation approaches

Over the last century, the tremendous growth in industrial activities particularly in the sectors of pharmaceuticals, petrochemicals and the reckless application of fertilizers and insecticides has raised the contamination of polyaromatic hydrocarbons (PAHs) tremendously. For more than a decade, the main focus of environmental experts is to come up with management approaches for the clean-up of sites polluted with PAHs. These are ubiquitous in nature i.e., widely distributed in ecosystem ranging from soil, air and marine water. Most of the PAHs possess immunotoxicity, carcinogenicity and genotoxicity. Being highly soluble in lipids, they are readily absorbed into the mammalian gastro intestinal tract. They are widely distributed with marked tendency of getting localized into body fat in varied tissues. Several remediation technologies have been tested for the removal of these environmental contaminants, particularly bioremediation has turned out to be a hope as the safest and cost-effective option. Therefore, this review first discusses various sources of PAHs, their effect on human health and interactions of PAHs with soils and sediments. In this review, a holistic insight of current scenario of existing remediation technologies and how they can be improvised along with the hindrances in the path of these technologies are properly addressed.

Assessing indicators of arsenic toxicity using variable fluorescence in a commercially valuable microalgae: Physiological and toxicological aspects

Indicators signaling Arsenic (As) stress through physiology of microalgae using non-destructive methods like variable fluorescence are rare but requisite. This study reports stress markers indicating arsenic (As) toxicity (in two concentrations 11.25 µg/L and 22.5 µg/L compared to a control) exposed to a microalga (Diacronema lutheri), using fast repetition rate fluorometry (FRRf). Growth and physiological parameters such as cell density, chl a and the maximum quantum yield F_v/F_m showed coherence and impeded after the exponential phase (day 9 - day 12) in As treatments compared to the control (p < 0.05). On contrary photo-physiological constants were elevated showing higher optical (a_LHII) and functional [Sigma (σ_PSII)] absorption cross-section for the As treatments (p < 0.05) further implying the lack of biomass production yet an increase in light absorption. In addition, As exposure increased the energy dissipation by heat (NPQ-NSV) showing a strong relationship with the de-epoxidation ratio (DR) involving photoprotective pigments. Total As bioaccumulation by D. lutheri showed a strong affinity with Fe adsorption throughout the algal growth curve. This study suggests some prompt photo-physiological proxies signaling As contamination and endorsing its usefulness in risk assessments, given the high toxicity and ubiquitous presence of As in the ecosystem.

Polyaromatic hydrocarbons (PAHs) in the water environment: A review on toxicity, microbial biodegradation, systematic biological advancements, and environmental fate

Polycyclic aromatic hydrocarbons (PAHs) are considered a major class of organic contaminants or pollutants, which are poisonous, mutagenic, genotoxic, and/or carcinogenic. Due to their ubiquitous occurrence and recalcitrance, PAHs-related pollution possesses significant public health and environmental concerns. Increasing the understanding of PAHs' negative impacts on ecosystems and human health has encouraged more researchers to focus on eliminating these pollutants from the environment. Nutrients available in the aqueous phase, the amount and type of microbes in the culture, and the PAHs' nature and molecular characteristics are the common factors influencing the microbial breakdown of PAHs. In recent decades, microbial community analyses, biochemical pathways, enzyme systems, gene organization, and genetic regulation related to PAH degradation have been intensively researched. Although xenobiotic-degrading microbes have a lot of potential for restoring the damaged ecosystems in a cost-effective and efficient manner, their role and strength to eliminate the refractory PAH compounds using innovative technologies are still to be explored. Recent analytical biochemistry and genetically engineered technologies have aided in improving the effectiveness of PAHs' breakdown by microorganisms, creating and developing advanced bioremediation techniques. Optimizing the key characteristics like the adsorption, bioavailability, and mass transfer of PAH boosts the microorganisms' bioremediation performance, especially in the natural aquatic water bodies. This review's primary goal is to provide an understanding of recent information about how PAHs are degraded and/or transformed in the aquatic environment by halophilic archaea, bacteria, algae, and fungi. Furthermore, the removal mechanisms of PAH in the marine/aquatic environment are discussed in terms of the recent systemic advancements in microbial degradation methodologies. The review outputs would assist in facilitating the development of new insights into PAH bioremediation.

Constructing model-averaging species sensitivity distributions of Phenanthrene based on reproductive fitness: Implications for assessing ecological risk in urban watershed

The challenge in optimizing the method of constructing species sensitivity distribution (SSD) remains. In this study, a model-averaging SSD was created to evaluate the ecological risk of Phenanthrene (PHE) in urban watershed based on reproductive fitness. Specifically, concentrations of PHE were measured in surface water samples collected from various watersheds of Wuhan, including five lake watersheds and the Wuhan reach of the Yangtze River and Han River. The reproductive endpoint of aquatic species was calculated to be most sensitive to PHE exposure, with the value of predict no-effect concentration (PNEC) at 0.19 μg/L. The results of probabilistic assessment methods, including joint probability curve (JPC), overall risk probability (ORP), and distribution-based quotient (DBQ), indicated that the ecological risks of PHE in large lakes have dropped significantly with distance from the downtown area of Wuhan, and the long-term effects of industrial activities may increase the risks in the lake watersheds. Basically, the ecological risks in Yangtze River are negligible; however, there is a relatively high risk of PHE in the Han River and some lake watersheds. The cos θ similarity analysis indicated the Yangtze River is strongly connected to the low-risk lake watersheds, and that in part reflects the risk in the Yangtze River being controlled by its surrounding these lake watersheds.

Advancement in algal bioremediation for organic, inorganic, and emerging pollutants

Rapidly changing bioremediation prospects are key drive to develop sustainable options that can offer extra benefits rather than only environmental remediation. Algal remediating is gaining utmost attention due to its mesmerising sustainable features, removing odour and toxicity, co-remediating numerous common and emerging inorganic and organic pollutants from gaseous and aqueous environments, and yielding biomass for a range of valuable products refining. Moreover, it also improves carbon footprint via carbon-capturing offers a better option than any other non-algal process for several high CO₂-emitting industries. Bio-uptake, bioadsorption, photodegradation, and biodegradation are the main mechanisms to remediate a range of common and emerging pollutants by various algae species. Bioadsorption was a dominant remediation mechanism among others implicating surface properties of pollutants and algal cell walls. Photodegradable pollutants were photodegraded by microalgae by adsorbing photons on the surface and intracellularly via stepwise photodissociation and breakdown. Biodegradation involves the transportation of selective pollutants intracellularly, and enzymes help to convert them into simpler non-toxic forms. Robust models are from the green microalgae group and are dominated by Chlorella species. This article compiles the advancements in microalgae-assisted pollutants remediation and value-addition under sustainable biorefinery prospects. Moreover, filling the knowledge gaps, and recommendations for developing an effective platform for emerging pollutants remediation and realization of commercial-scale algal bioremediation.

Effects of polycyclic aromatic hydrocarbons on marine and freshwater microalgae - A review

The first synthetic review of the PAHs effects on microalgae in experimental studies and aquatic ecosystems is provided. Phytoplankton and phytobenthos from marine and freshwaters show a wide range of sensitivities to PAHs, and can accumulate, transfer and degrade PAHs. Different toxicological endpoints including growth, chlorophyll a, in vivo fluorescence yield, membrane integrity, lipid content, anti-oxidant responses and gene expression are reported for both freshwater and marine microalgal species exposed to PAHs in culture and in natural assemblages. Photosynthesis, the key process carried out by microalgae appears to be the most impacted by PAH exposure. The effect of PAHs is both dose- and species-dependent and influenced by environmental factors such as UV radiation, temperature, and salinity. Under natural conditions, PAHs are typically present in mixtures and the toxic effects induced by single PAHs are not necessarily extrapolated to mixtures. Natural microalgal communities appear more sensitive to PAH contamination than microalgae in monospecific culture. To further refine the ecological risks linked to PAH exposure, species-sensitivity distributions (SSD) were analyzed based on published EC₅₀s (half-maximal effective concentrations during exposure). HC₅ (harmful concentration for 5% of the species assessed) was derived from SSD to provide a toxicity ranking for each of nine PAHs. The most water-soluble PAHs naphthalene (HC₅ = 650 µg/L), acenaphthene (HC₅ = 274 µg/L), and fluorene (HC₅ = 76.8 µg/L) are the least toxic to microalgae, whereas benzo[a]pyrene (HC₅ = 0.834 µg/L) appeared as the more toxic. No relationship between EC₅₀ and cell biovolume was established, which does not support assumptions that larger microalgal cells are less sensitive to PAHs, and calls for further experimental evidence. The global PAHs HC₅ for marine species was on average higher than for freshwater species (26.3 and 1.09 µg/L, respectively), suggesting a greater tolerance of marine phytoplankton towards PAHs. Nevertheless, an important number of experimental exposure concentrations and reported toxicity thresholds are above known PAHs solubility in water. The precise and accurate assessment of PAHs toxicity to microalgae will continue to benefit from more rigorously designed experimental studies, including control of exposure duration and biometric data on test microalgae.

Cuttlefish bone powder as an efficient solid-phase extraction sorbent of anti-SARS-CoV-2 drugs in environmental water

Many antiviral drugs were developed to counteract coronavirus disease, 2019 (COVID-19) with severe acute respiratory syndrome. Therefore, the scientific community's efforts have focused on the detection and quantification of antiviral compounds currently being tested for COVID-19 treatment. Cuttlefish bone powder (CFBP) has been used for the first time as solid-phase extraction (SPE) sorbent for the extraction of SARS CoV-2 antiviral drugs (chloroquine, ritonavir and indomethacin) from water samples. An effective and sensitive method was developed by combining SPE and liquid chromatography- UV detection (LC-UV). An experimental design was applied for the optimization of extraction process. Experimental variables were optimized using Doehlert matrix. The developed method included 50 mg of CFBP sorbent, 20 mL of water sample at pH = 9 and 5 mL of ACN/KH₂PO₄ buffer solution (80:20, v/v) in the elution step. For validation of the method, selectivity, linearity precision, and sensitivity were evaluated. Extraction recovery percentage of all Sars cov-2 antivirals were above 98.2%. The detection and quantification limits were between 0.1 and 0.5 µg L⁻¹ and 0.6 and 2 µg L⁻¹, respectively. The current study suggested that CFBP has the application potential for the enhanced SPE of SARS CoV-2 antiviral drugs from water samples.

Simultaneous 17β-estradiol degradation, carbon dioxide fixation, and carotenoid accumulation by Thermosynechococcus sp. CL-1

Thermosynechococcus sp. CL-1 (TCL-1) has a high potency to utilize CO₂ under extreme conditions including high temperature, alkaline condition, and the occurrence of 17β-estradiol (E2). In this study, TCL-1 cultivation with E2 addition in the range of 0-20 mg/L was combined with various growth arrangements (light intensity and dissolved inorganic nitrogen/DIN level). After 120 h cultivation, the 1.0 mg/L E2, 200 µmol photons/m²/s light intensity, and 5.8 mM available nitrogen performed the best growth with 4.58 ± 0.18 mg/L/h biomass productivity, 94.9 ± 3.3% total estrogen removal, and 11.41 ± 0.11 mg/L/h CO₂ fixation rate. Estrogen degradation was mainly carried out by biodegradation route which started from E2 conversion into estrone/E1 and with only 4-6% influence from the abiotic factors. Compared with the accumulated zeaxanthin, β-carotene was dominantly generated with a productivity of 0.043 ± 0.019 mg/L/h. Therefore, TCL-1 cultivation is an efficient strategy for simultaneous CO₂ fixation, estrogen removal, and carotenoid accumulation as valuable byproducts.

Single toxicity of arsenic and combined trace metal exposure to a microalga of ecological and commercial interest: Diacronema lutheri

Eco-toxicological assays with species of economic interest such as Diacronema lutheri are essential for industries that produce aquaculture feed, natural food additives and also in drug developing industries. Our study involved the exposure of a single and combined toxicity of arsenic (As V) to D. lutheri for the entire algal growth phase and highlighted that a combined exposure of As V with other essential (Copper, Cu; Nickel, Ni) and non-essential (Cadmium, Cd; Lead, Pb) trace metals reduced significantly the cell number, chlorophyll a content, and also significantly increased the de-epoxidation ratio (DR) as a stress response when compared to the single toxicity of As V. Arsenic, as one of the ubiquitous trace metal and an active industrial effluent is reported to have an increased bio-concentration factor when in mixture with other trace metals in this study. In the combined exposure, the concentration of total As bio-accumulated by D. lutheri was higher than in the single exposure. Hence, polluted areas with the prevalence of multiple contaminants along with the highly toxic trace metals like As can impose a greater risk to the exposed organisms that may get further bio-magnified in the food chain. Our study highlights the consequences and the response of D. lutheri in terms of contamination from single and multiple trace metals in order to obtain a safer biomass production for the growing need of natural derivatives.

A photobioreactor using Nannochloropsis oculata marine microalgae for removal of polycyclic aromatic hydrocarbons and sorption of metals in produced water

The objective of the present work is to evaluate the potential of the removal of PAHs and metal sorption for the treatment of petroleum produced water using a photobioreactor system with Nannochloropsis oculata microalgae. A set of photobioreactors with different gradients of produced water concentration diluted in saline water was designed, establishing five gradients (v/v): 0, 25, 50, 75 and 100%. These concentrations were established to test the removal of PAHs. The microalgal growth was monitored daily, noting the adaptation of microalgae to the addition of produced water as a culture medium, with cell growth of 5.24 × 10⁷ cells mL^-1 from 25% (v/v), 4.09 × 10⁷ cells mL^-1 from 50% (v/v), 2.77 × 10⁷ cells mL^-1 from 75% (v/v), and 1.17 × 10⁷ cells mL^-1 from 100%. The total removal efficiency of PAHs in the produced water was 94%. Organic compounds such as naphthalene, benzo(a)pyrene, benzo(b)fluoranthene, and acenaphthylene showed higher removal percentages, between 89 and 99% efficiency in produced water. Iron and zinc were the metals detected in the water produced, and iron reduced from 1.57 ± 0.08 mg L^-1 to <0.1 mg L^-1 after 28 days of cultivation, whereas zinc increased by 0.23 ± 0.05 to 3.90 ± 0.46 mg L^-1. The PAHs removal may have occurred in two ways, by intracellular bioaccumulation or biodegradation by oxidoreductase enzymes. 0.2 g of dry biomass with maximum extraction of oil obtained 3.07% and generation of 3.70% of protein was considered as value-added products for biodiesel and bioplastics.

Construction of biotreatment platforms for aromatic hydrocarbons and their future perspectives

Aromatic hydrocarbons (AHCs) are one of the major environmental pollutants introduced from both natural and anthropogenic sources. Many AHCs are well known for their toxic, carcinogenic, and mutagenic impact on human health and ecological systems. Biodegradation is an eco-friendly and cost-effective option as microorganisms (e.g., bacteria, fungi, and algae) can efficiently breakdown or transform such pollutants into less harmful and simple metabolites (e.g., carbon dioxide (aerobic), methane (anaerobic), water, and inorganic salts). This paper is organized to offer a state-of-the-art review on the biodegradation of AHCs (monocyclic aromatic hydrocarbons (MAHs) and polycyclic aromatic hydrocarbons (PAHs)) and associated mechanisms. The recent progress in biological treatment using suspended and attached growth bioreactors for the biodegradation of AHCs is also discussed. In addition, various substrate growth and inhibition models are introduced along with the key factors governing their biodegradation kinetics. The growth and inhibition models have helped gain a better understanding of substrate inhibition in biodegradation. Techno-economic analysis (TEA) and life cycle assessment (LCA) aspects are also described to assess the technical, economical, and environmental impacts of the biological treatment system.

Polycyclic Aromatic Hydrocarbons: Sources, Toxicity, and Remediation Approaches

Polycyclic aromatic hydrocarbons (PAHs) are widespread across the globe mainly due to long-term anthropogenic sources of pollution. The inherent properties of PAHs such as heterocyclic aromatic ring structures, hydrophobicity, and thermostability have made them recalcitrant and highly persistent in the environment. PAH pollutants have been determined to be highly toxic, mutagenic, carcinogenic, teratogenic, and immunotoxicogenic to various life forms. Therefore, this review discusses the primary sources of PAH emissions, exposure routes, and toxic effects on humans, in particular. This review briefly summarizes the physical and chemical PAH remediation approaches such as membrane filtration, soil washing, adsorption, electrokinetic, thermal, oxidation, and photocatalytic treatments. This review provides a detailed systematic compilation of the eco-friendly biological treatment solutions for remediation of PAHs such as microbial remediation approaches using bacteria, archaea, fungi, algae, and co-cultures. In situ and ex situ biological treatments such as land farming, biostimulation, bioaugmentation, phytoremediation, bioreactor, and vermiremediation approaches are discussed in detail, and a summary of the factors affecting and limiting PAH bioremediation is also discussed. An overview of emerging technologies employing multi-process combinatorial treatment approaches is given, and newer concepts on generation of value-added by-products during PAH remediation are highlighted in this review.

Characterization of cell responses in Rhodomonas baltica exposed to PMMA nanoplastics

Due to their small size, nanoplastics (NPLs) possess specific properties which can potentiate their toxicity towards aquatic organisms. As primary producers, microalgae are at the base of aquatic food chains, thus negative impacts of NPLs will likely lead to disturbances in ecosystem productivity. The majority of data available on the toxicity of NPLs is limited to polystyrene and green microalgae, leaving a significant lack of knowledge on impacts of other polymer types across different taxonomic groups. So, the main objective of this study was to evaluate the cell responses of the red microalgae Rhodomonas baltica to plain and carboxylated poly(methyl methacrylate) NPLs (PMMA and PMMA-COOH, 50 nm). Results showed different NPL behaviour in media over time, with PMMA forming micro-scale aggregates and PMMA-COOH maintaining its nominal size range. PMMA caused a higher impact in cellular and physiological parameters than PMMA-COOH, even though a decrease in algal growth was only seen for the later. Overall, PMMA caused a significant decrease in cell viability followed by an increase in cell size and complexity, overproduction of pigments, loss of membrane integrity, hyperpolarization of the mitochondrial membrane, increased production of ROS and LPO, decrease in DNA content and reduced photosynthetic capacity. Conversely, a decrease in algal growth for PMMA-COOH was connected to an impairment in cell cycle and consequent decrease in cell viability, metabolic activity and photosynthetic performance, with negligible effects in ROS formation and pigments content. This study provided a first insight into the mechanistic understanding of the toxic impacts of PMMA and PMMA-COOH NPLs in red microalgae. Results obtained suggest an interaction between both NPLs and R. baltica cell surface that is dependent on particle behaviour and surface chemistry. Future experiments focusing on the in-depth characterization of the mode of action of these particles are recommended.

Effects of different routes of exposure to metals on bioaccumulation and population growth of the cyclopoid copepod Paracyclopina nana

We examined effects of the three metals cadmium (Cd), copper (Cu), and nickel (Ni) on two subpopulations of the cyclopoid copepod Paracyclopina nana. We sought to investigate the effects of metal exposure on population growth and structure of P. nana and to understand the parameters affecting the metal bioaccumulation in copepods. A first experiment tested the hypothesis of competition between these metals in a mixture using a P. nana mass culture in 10 L beakers with the sublethal concentrations (1/3 of LC50) as determined for E. affinis. A second experiment pursued the same with a P. nana population which was adapted to a higher Cu concentration for several generations (226.9 ± 15.9 μg g^-1 dw Cu in copepods) and using the proper sublethal concentrations for P. nana. After 96 h of exposure, results from the first experiment showed a decreasing population growth and instead of an increasing metal accumulation in copepods. Cd also appeared to be more accumulated when it was alone, confirming the hypothesis of metal competition in mixture. Results from the second experiment revealed less marked effects. When metal concentrations increased in the treatment it decreased in copepods, indicating depuration activity in the population already adapted to metal exposure. This paper is the first one investigating the parameters affecting the bioaccumulation capacity of P. nana in response to metals. It offers a better understanding of copepod responses to metal contamination in a complex aquatic environment.

Acute and chronic toxicity of cadmium on the copepod Pseudodiaptomus annandalei: A life history traits approach

We determined the effect of acute and chronic toxicity of cadmium (Cd) on Pseudodiaptomus annandalei, according to their developmental and reproductive stages. Firstly, to estimate the 50% lethal concentration (LC₅₀), acute exposure of nauplii and copepodids to 20, 40, 80, 150, and 300 μg/L of Cd was tested, and the effects of 5 μg/L and 40 μg/L of Cd on copepod developmental rate was done. Female lifespan and number of nauplii produced were compared. Secondly, one generation of copepod was exposed to dissolved (WCd) and dietary (DCd) Cd, and sex-specific Cd uptake and population density were estimated. 96 h LC₅₀ was 40 μg/L Cd for nauplii and 120 μg/L Cd for copepodids. Duration of copepod development was 3.5 days and 5.5 days longer than the control when exposed to 5 μg/L and 40 μg/L of Cd, respectively. Female lifespan in both treatments were 9 and 8 days shorter than in the control, respectively. Total number of nauplii produced per female lifespan was 440 (control), 450 (5 μg/L Cd), and 365 (40 μg/L Cd). Cd uptake in copepods increased from nauplii to adults when exposed to dietary Cd and decreased when exposed to dissolved Cd. Dietary uptake of Cd was significantly higher in males than in females and Cd uptake from water was higher in males than in females, but not statistically significant. The total population of copepods were significantly affected by Cd. The toxic effects of Cd in copepods appear to depend on developmental stage, sex, duration and uptake route.

Adsorptive removal of polycyclic aromatic hydrocarbons by detritus of green tide algae deposited in coastal sediment

Rare information is available on the adsorptive removal of polycyclic aromatic hydrocarbons (PAHs) in the presence of algal detritus deposited in the coastal sediment during the outbreak of the green tide. The adsorptive removal of typical PAHs by Ulva prolifera (U. prolifera) detritus was firstly investigated since the algal detritus was of great importance for the biogeochemical cycle of coastal contaminants. The results showed that equilibrium adsorptive capacities of naphthalene, phenanthrene and benzo[a] pyrene on the U. prolifera detritus were 1.27, 1.97, and 2.49 mg kg^-1, respectively, at the initial concentration of 10 μg L^-1. The in situ monitoring using laser confocal scanning microscopy confirmed the adsorptive removal of PAHs by U. prolifera detritus. The adsorption of these PAHs was highly pH-dependent. The increase in salinity led to the increase in naphthalene removal rate, while the salinity showed scarce influence on the removal of phenanthrene and benzo[a] pyrene. There was a good linear relationship (R² ≥ 0.9892) between the removal efficiency of PAHs and the initial concentration of PAHs. Slow desorption kinetics and low desorption rate (<16%) indicated that the adsorptive removal of PAHs could be benign to the environment. These findings demonstrated that the occurrence of green tide could provide a new natural remediation approach for contamination of PAHs through the adsorptive removal by the detritus of green tidal algae deposited in the coastal sediment.