Adsorptive Removal of Tetracyclines and Fluoroquinolones Using Yak Dung Biochar

Enhanced adsorption performance of oxytetracycline in aqueous solutions by Mg-Fe modified suaeda-based magnetic biochar

Oxytetracycline (OTC) in the waste water can be removed by biochar adsorption. How to separate the biochar adsorbed antibiotics from the wastewater was also a problem. The nontoxic magnetic biochar was prepared from Suaeda biochar (800SBC) by mafic bimetal modification, and used for the removal of OTC. The results of XRD and VSM indicated that the main composition of biochar was ferrite. Then through batch adsorption experiments, the adsorption kinetics, isothermal adsorption, thermodynamics, and coexisting ion and adsorbent regeneration experiments were studied. Through the fitting of the adsorption model, it was found that Mg-Fe@800SBC(1:1) and 800SBC belonged to chemisorption. 800SBC was consistent with the Langmuir model, mainly monolayer adsorption, and Mg-Fe@800SBC(1:1) was consistent with the Freundlich model, mainly multilayer adsorption. The adsorption processes of the two materials were spontaneous, endothermic and entropic decreasing processes. The maximum adsorption capacity of the Mg-Fe@800SBC(1:1) for OTC from the Sips L-F model was 82.83 mg/g. Through various characterizations of magnetic biochar, it was found that the adsorption mechanism of the modified biochar included the hydrogen bonds between the oxygen-containing functional group of biochar and the -NH2 group of OTC, π-π EDA interaction, electrostatic attraction and complexation. Coexistence anions (CO32- and PO43-) have a negative effect on the adsorption process.

Ecotoxicological effects of antibiotic adsorption behavior of microplastics and its management measures

Microplastics adsorb heavy metals and organic pollutants to produce combined pollution. Recently, the adsorption behavior of antibiotics on microplastics has received increasing attention. Exploring the sorption behavior of pollutants on microplastics is an important reference in understanding their ecological and environmental risk studies. In this paper, by reviewing the academic literature in recent years, we clarified the current status of research on the adsorption behavior of antibiotics on microplastics, discussed its potential hazards to ecological environment and human health, and summarized the influence of factors on the adsorption mechanisms. The results show that the adsorption behavior of antibiotics on microplastics is controlled by the physical and chemical properties of antibiotics, microplastics, and water environment. Antibiotics are adsorbed on microplastics through physical and chemical interactions, which include hydrophobic interaction, partitioning, electrostatic interaction, and other non-covalent interactions. Intensity of adsorption between them is mainly determined by their physicochemical properties. The basic physicochemical properties of the aqueous environment (e.g., pH, salinity, ionic strength, soluble organic matter content, and temperature) will affect the physicochemical properties of microplastics and antibiotics (e.g., particle size, state of dispersibility, and morphology), leading to differences in the type and strength of their interactions. This paper work is expected to provide a meaningful perspective for better understanding the potential impacts of antibiotic adsorption behavior of microplastics on aquatic ecology and human health. In the meantime, some indications for future related research are provided.

Biochar-assisted degradation of oxytetracycline by Achromobacter denitrificans and underlying mechanisms

Contamination of the environment with large amounts of residual oxytetracycline (OTC) and the corresponding resistance genes poses a potential threat to natural ecosystems and human health. In this study, an effective OTC-degrading strain, identified as Achromobacter denitrificans OTC-F, was isolated from activated sludge. In the degradation experiment, the degradation rates of OTC in the degradation systems with and without biochar addition were 95.01-100% and 73.72-99.66%, respectively. Biochar promotes the biodegradation of OTC, particularly under extreme environmental conditions. Toxicity evaluation experiments showed that biochar reduced biotoxicity and increased the proportion of living cells by 17.36%. Additionally, biochar increased the activity of antioxidant enzymes by 34.1-91.0%. Metabolomic analysis revealed that biochar promoted the secretion of antioxidant substances such as glutathione and tetrahydrofolate, which effectively reduced oxidative stress induced by OTC. This study revealed the mechanism at the molecular level and provided new strategies for the bioremediation of OTC in the environment.

Magnetically separable laccase-biochar composite enable highly efficient adsorption-degradation of quinolone antibiotics: Immobilization, removal performance and mechanisms

The tremendous potential of hybrid technologies for the elimination of quinolone antibiotics has recently attracted considerable attention. This current work prepared a magnetically modified biochar (MBC) immobilized laccase product named LC-MBC through response surface methodology (RSM), and LC-MBC showed an excellent capacity in the removal of norfloxacin (NOR), enrofloxacin (ENR) and moxifloxacin (MFX) from aqueous solution. The superior pH, thermal, storage and operational stability demonstrated by LC-MBC revealed its potential for sustainable application. The removal efficiencies of LC-MBC in the presence of 1 mM 2,2'-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) for NOR, ENR and MFX were 93.7 %, 65.4 % and 77.0 % at pH 4 and 40 °C after 48 h reaction, respectively, which were 1.2, 1.3 and 1.3 times higher than those of MBC under the same conditions. The synergistic effect of adsorption by MBC and degradation by laccase dominated the removal of quinolone antibiotics by LC-MBC. Pore-filling, electrostatic, hydrophobic, π-π interactions, surface complexation and hydrogen bonding contributed in the adsorption process. The attacks on the quinolone core and piperazine moiety were involved in the degradation process. This study underscored the possibility of immobilization of laccase on biochar for enhanced remediation of quinolone antibiotics-contaminated wastewater. The proposed physical adsorption-biodegradation system (LC-MBC-ABTS) provided a novel perspective for the efficient and sustainable removal of antibiotics in actual wastewater through combined multi-methods.

Hydrochloric acid-modified fungi-microalgae biochar for adsorption of tetracycline hydrochloride: Performance and mechanism

Novel biochar (BC) was prepared by pyrolysis using Aspergillus oryzae-Microcystis aeruginosa (AOMA) flocs as raw materials. It has been used for tetracycline hydrochloride (TC) adsorption along with acid (HBC) and alkali modification (OHBC). Compared with BC (114.5 m² g^-1) and OHBC (283.9 m² g^-1), HBC had a larger specific surface area (S_BET=338.6 m² g^-1). Meanwhile, the Elovich kinetic and Sip isotherm models adequately fit the adsorption data, and intraparticle diffusion is the controlling factor for TC adsorption diffusion on HBC. Furthermore, the thermodynamic data indicated that this adsorption was endothermic and spontaneous. The experimental results demonstrated that there are multiple interactions during the adsorption reaction process, including pore filling, H-bonds, π-π interaction, hydrophobic affinity, and van der Waals forces. In general, biochar prepared from flocs of AOMA can be used to remediate tetracycline-contaminated water, and it is of great significance in improving resource utilization.

Antibiotic bioremediation by new generation biochar: Recent updates

The evolving multidrug resistance in microbes with increasing antibiotic pollution is becoming a severe global crisis. Recent developments on antibiotic remediations by biochar are promising. Advancements in biochar engineering enhanced biochar remediation efficiency to another level through developing new interactions and bonding abilities with antibiotic pollutants. Especially chemical/metal-composite modification significantly increased catalysis of biochar. The review's main focus is to underline biochar efficiency for the abatement of emerging antibiotic pollutants. Moreover, to relate feedstock, production conditions, and engineering techniques with biochar properties. Also, modification strategies are reviewed to obtain biochar or their composites before examining improved remediation potential ranging from 20 to 552 mg g^-1 for various antibiotics. Biochar offers different interactions depending on the surface functionalities e.g., π-π stacking, electrostatic, H-bonding, etc. Biochar and related composites have also been reviewed for remarkable properties e.g., photocatalysis, adsorption, and oxidation processes. Furthermore, future research directions and opportunities for biochar research are discussed.

Biochar for agronomy, animal farming, anaerobic digestion, composting, water treatment, soil remediation, construction, energy storage, and carbon sequestration: a review

In the context of climate change and the circular economy, biochar has recently found many applications in various sectors as a versatile and recycled material. Here, we review application of biochar-based for carbon sink, covering agronomy, animal farming, anaerobic digestion, composting, environmental remediation, construction, and energy storage. The ultimate storage reservoirs for biochar are soils, civil infrastructure, and landfills. Biochar-based fertilisers, which combine traditional fertilisers with biochar as a nutrient carrier, are promising in agronomy. The use of biochar as a feed additive for animals shows benefits in terms of animal growth, gut microbiota, reduced enteric methane production, egg yield, and endo-toxicant mitigation. Biochar enhances anaerobic digestion operations, primarily for biogas generation and upgrading, performance and sustainability, and the mitigation of inhibitory impurities. In composts, biochar controls the release of greenhouse gases and enhances microbial activity. Co-composted biochar improves soil properties and enhances crop productivity. Pristine and engineered biochar can also be employed for water and soil remediation to remove pollutants. In construction, biochar can be added to cement or asphalt, thus conferring structural and functional advantages. Incorporating biochar in biocomposites improves insulation, electromagnetic radiation protection and moisture control. Finally, synthesising biochar-based materials for energy storage applications requires additional functionalisation.

Novel insights into the adsorption of organic contaminants by biochar: A review

With rising concerns in the practical application of biochar for the remediation of environment influenced by various organic contaminants, a critical review to facilitate insights the crucial role that biochar has played in wastewater and polluted soil decontamination is urgently needed. This research therefore aimed to describe different intriguing dimensions of biochar interactions with organic contaminants, which including: (i) an introduction of biochar preparation and the related physicochemical properties, (ii) an overview of mechanisms and factors controlling the adsorption of organic contaminants onto biochar, and (iii) a summary of the challenges and an outlook of the further research needs in this issue. In the light of the survey consequences, the appearance of biochar indicates the potential in substituting the existing costly adsorbents, and it has been proved that biochar is one promising adsorbent for organic pollutants adsorption removal from water and soil. However, some research gaps, such as dynamic adsorption, potential environmental risks, interactions between biochar and soil microbes, novel modification techniques, need to be further investigated to facilitate its practical application. This research will be conductive to better understanding the adsorption removal of organic contaminants by biochar.

A review of biochar in anaerobic digestion to improve biogas production: Performances, mechanisms and economic assessments

Anaerobic digestion (AD) technology still faces some challenges including low methane productivity, instable operation efficiency and undesired refractory substances degradation. Biochar has recently been recognized as a promising alternative addition in AD process to enhance methane production. Based on VOSviewer analysis, this review presents a comprehensive summarizing of the applications, performances, and economies of biochar strategies in AD system. Firstly, typical production processes of biochar and its main characteristics including adsorption and immobilization ability, buffering ability and electron transfer ability were evaluated. Then, the applications of biochar in AD and its improving effects on biogas production/purification were summarized. Accordingly, the corresponding mechanisms of biochar addition in AD for digestion efficiency improvement were elucidated. Finally, the economic and environmental feasibilities of application biochar in AD, as well as prospective future studies were summarized. Through an overview of biochar in AD system, this paper aims to promote its widely practical applications.

Biochar Modified by Nano-manganese Dioxide as Adsorbent and Oxidant for Oxytetracycline

Biochar has limited capacity to adsorb oxytetracycline (OTC). Here we have used bamboo willow biochar (BC) as a carrier to produce nMnO₂-loaded biochars (MBC) by a co-precipitation method. Their chemical compositions, morphological features, specific surface area, and surface functional groups were observed or determined. Batch experiments were conducted to assess the effects of reaction time, initial OTC concentrations, pH, salt concentrations, and natural organic matter (NOM) on OTC removal. Kinetics and isotherms indicated that OTC was mainly adsorbed via chemical interactions, and mono- and multi-layer adsorption occurred on the surface. MBC removed 19-25 times more OTC than BC, and the removal was highest at near-neutral pH, not influenced by NaCl (2, 10 mM), slighted reduced by NOM (0-20 mg L^-1), and enhanced by NaHCO₃ (2, 10 mM). Besides being an adsorbent, MBC acted as an oxidant and degraded 58.5% of OTC at 24 h.

Adsorption of emerging contaminants from water and wastewater by modified biochar: A review

Emerging contaminants (ECs), a group of relatively low-concentration but high-toxicity pollutants in the environment, have attracted widespread attention in recent years. These trace pollutants can be enriched in organisms and finally transferred to human bodies, posing a potential hazard to public health. Biochar, a low-cost and high-efficiency adsorbent, has been used to treat ECs in water. However, due to certain limitations of pristine biochar, such as poor adsorption capacity, narrow adsorption range, and other shortcomings, it is necessary to modify biochar to improve its applications in water treatment for ECs. Currently, there are a lot of reports on the removal of ECs from water by modified biochar. These studies explored different modification methods to functionalize biochar with various physicochemical properties, which resulted in distinct adsorption effects, behaviors and mechanisms of modified biochar on different ECs. There is a need to systematically review and digest the knowledge on the adsorption of ECs on modified biochar. In this review, recent biochar modification methods used in ECs removal are firstly summarized, and the adsorption performance and mechanisms of modified biochar on typical ECs are then systematically reviewed. Finally, the main research directions and trends, as well as recommendations and suggestions for future development are pointed out.

Effects of Temperature, Solution pH, and Ball-Milling Modification on the Adsorption of Non-steroidal Anti-inflammatory Drugs onto Biochar

This study explored the adsorption of representative non-steroidal anti-inflammatory drugs (NSAIDs), acetaminophen (AP), ibuprofen (IB), and salicylic acid (SA) by biochars. The sorption kinetics were fitted with six commonly used kinetic models, and the isotherm data was well described by both Langmuir and Freundlich models. Biochars of longer pyrolysis time showed better performance with the Langmuir maximum sorption capacities for AP, IB, and SA of 196 mg/g, 132 mg/g, and 48.8 mg/g, respectively. Variation in temperature hardly affected the adsorption performances, while the influence of pH exhibited pronounced dependency on physicochemical properties of both NSAIDs and biochars. Eighteen ball-milled (BM) biochars were then produced under different ball-milling conditions and examined for NSAIDs removal. Compared with unmilled biochars, BM-biochars produced under optimum conditions showed higher removal efficiencies. Electrostatic interaction and pore width of biochars greatly affected the NSAIDs adsorption onto biochars.

Bioavailability and Speciation of Heavy Metals in Polluted Soil as Alleviated by Different Types of Biochars

Biochar is an important material for remediation of contaminated soils, however, different biochars have variable effects on bioavailability of heavy metals. This experiment revealed that peanut shell biochar (PSB) has highest reduction of 78% concentration of Pb in plant roots. The maize straw biochar (MSB) has significantly decreased Zn and Cd concentration (mg/kg dry weight) in Chinese cabbage than other treatments of biochars. The plants of Chinese cabbage have exhibited an efficient transport capability for Zn and Cd. The biochars have reduced exchangeable form of Cd/Zn, enhanced residual heavy metals, and consequently diminished accumulation of heavy metals in plants. The straw block biochar (SBB), PSB and MSB have efficiently relieved the stresses of heavy metals in plants.

Engineered Pyrogenic Materials as Tools to Affect Arsenic Mobility in Old Mine Site Soil of Mediterranean Region

The application of pyrogenic materials in immobilization processes of metalloids represents a burning issue in environmental and waste applications and management. The main objective of this study was to characterize the effect of biomass pretreatment by Cu, Fe and Mg blending and pyrolysis temperature on As sorption efficiency as a model of anionic metalloids from model solutions and As immobilization in old mine soil by pyrogenic materials. The physico-chemical characterization of engineered materials produced in slow pyrolysis process at 400 and 700°C from metal-blended hard wood chips (30% w/w) showed increasing of surface areas (1.4-1.8-fold), changes in pH, and more than 50% decrease in total C content. The batch sorption processes of As ions by Cu-modified pyrogenic materials (CuPM), Fe-modified pyrogenic materials (FePM), and Mg-modified pyrogenic materials (MgPM) showed increasing uptake in order CuPM700 (Q_max 2.56 mg g^-1) < CuPM400 (Q_max 3.88 mg g^-1) < FePM700 (Q_max 5.90 mg g^-1) < MgPM700 (Q_max 7.42 mg g^-1) < MgPM400 (Q_max 9.59 mg g^-1) < FePM400 (Q_max 10.55 mg g^-1). Engineered pyrogenic materials produced at 400°C showed higher immobilization effect on soluble As in soil pore water of old mine site soil from Mediterranean area. FePM400 reduced mobility of arsenic > 3.2 times and MgPM400 > 5 times compared to control. Promising pyrogenic material MgPM400 showed immobilization effect also on additional heavy metals (Cd, Cu, Fe, Mn, Pb, Sr, Zn) present in studied soil.