Biochar Adsorbents for Arsenic Removal from Water Environment: A Review

Co-pyrolysis of alkali-fused fly ash and corn stover to synthesize biochar composites for remediating lead-contaminated soil

Fly ash (FA) is mainly composed of silica, alumina, and other metal oxide components, and has a positive stabilizing effect on soil heavy metals. Biochar composites produced from FA and corn stover (CS) can improve its remediation performance. Therefore, a batch of biochar composites (alkali-fused FA-CS biochars, ABs), synthesized via co-pyrolysis of CS and alkali-fused FA (AFFA) at different temperatures of 300, 500, and 700 °C (AB300-1, AB500-1, and AB700-1) and CS to AFFA mass ratios of 10:1, 10:2, and 10:5 (AB500-1, AB500-2, and AB500-5), was used to remediate lead (Pb)-contaminated soil. Compared with pristine biochars (BCs), ABs were enriched with oxygen-containing functional groups (Si-O-Si and Si-O) and aromatic structures. The ABs prepared at lower pyrolytic temperature (≤500 °C) and lower ratio of CS to AFFA (10:1) showed higher yield and stability. The contents of Toxicity Characteristic Leaching Procedure (TCLP)-extractable Pb and DTPA-CaCl2-triethanolamine (DTPA)-extractable Pb were generally lower in the soils amended with ABs than BCs. Compared with other ABs such as AB300-1, AB500-2, AB500-5, and AB700-1, the soil amended with AB500-1 had lower contents of TCLP and DTPA-extractable Pb (24% reduction), exhibiting superior performance in stabilizing Pb in the soil. The gradual decrease of DTPA-extractable Pb content in the soil with increasing dosage of AB500-1 amendments suggests that AB500-1 facilitated the conversion of bioavailable Pb to the stable and less toxic residual fractions. Specifically, the highest percentage of residual fraction of Pb in soil amended with AB500-1 was 14%. Correlation analyses showed that the soil DTPA-extractable Pb content decreased with the increase of soil pH and cation-exchange capacity (CEC) value. ABs stabilize Pb in the soils mainly via electrostatic attraction, precipitation, cation-π interaction, cation exchange, and complexation. These findings provide insights for producing functionalized biochar composites from industrial waste like FA and biomass waste for remediating the soils polluted by heavy metals.

Arsenic and antimony desorption in water treatment processes: Scaling up challenges with emerging adsorbents

The metalloids arsenic (As) and antimony (Sb) belong to the pnictogen group of the periodic table; they share many characteristics, including their toxic and carcinogenic properties; and rank as high-priority pollutants in the United States and the European Union. Adsorption is one of the most effective techniques for removing both elements and desorption, for further reuse, is a part of the process to make adsorption more sustainable and feasible. This review presents the current state of knowledge on arsenic and antimony desorption from exhausted adsorbents previously used in water treatment, that has been reported in the literature. The application of different types of eluents to desorb As and Sb and their desorption performance are described. The regeneration of saturated adsorbents and adsorbate recovery techniques are outlined, including the fate of spent media and possible alternatives for waste disposal of exhausted materials. Future research directions are discussed, as well as current issues including the lack of environmental impact analysis of emerging adsorbents.

Conversion of locally available materials to biochar and activated carbon for drinking water treatment

For environmental sustainability and to achieve sustainable development goals (SDGs), drinking water treatment must be done at a reasonable cost with minimal environmental impact. Therefore, treating contaminated drinking water requires materials and approaches that are inexpensive, produced locally, and effortlessly. Hence, locally available materials and their derivatives, such as biochar (BC) and activated carbon (AC) were investigated thoroughly. Several researchers and their findings show that the application of locally accessible materials and their derivatives are capable of the adsorptive removal of organic and inorganic contaminants from drinking water. The application of locally available materials such as lignocellulosic materials/waste and its thermo-chemically derived products, including BC and AC were found effective in the treatment of contaminated drinking water. Thus, this review aims to thoroughly examine the latest developments in the use of locally accessible feedstocks for tailoring BC and AC, as well as their features and applications in the treatment of drinking water. We attempted to explain facts related to the potential mechanisms of BC and AC, such as complexation, co-precipitation, electrostatic interaction, and ion exchange to treat water, thereby achieving a risk-free remediation approach to polluted water. Additionally, this research offers guidance on creating efficient household treatment units based on the health risks associated with customized adsorbents and cost-benefit analyses. Lastly, this review work discusses the current obstacles for using locally accessible materials and their thermo-chemically produced by-products to purify drinking water, as well as the necessity for technological interventions.

Effective adsorption of bisphenol A from aqueous solution using phosphoric acid-assisted hydrochar

Sycamore leaf biochar (PSAC) was prepared by a two-step phosphoric acid-assisted hydrothermal carbonization combined with a short-time activation method. The characterization results showed that the introduction of phosphoric acid molecules and thermal activation resulted in a substantial increase in the specific surface area (994.21 m2/g) and microporous capacity (0.307 cm3/g) of PSAC. The batch adsorption results showed that the adsorption process of PSAC on bisphenol A (BPA) was best described by the pseudo-second-order kinetic model and Sips isothermal model, with a maximum adsorption capacity of 247.42 mg/g. The adsorption of BPA onto PSAC was determined to be a spontaneous endothermic process. The equilibrium adsorption capacity of PSAC exhibited an upward trend with increasing initial BPA concentration and temperature while decreasing with higher adsorbent dosage and pH value. Coexisting cations and humic acids in water have little impact on the adsorption performance of PSAC for BPA. The adsorption mechanism of BPA by PSAC was mainly governed by pore filling and hydrogen bonding interactions, π-π interactions, and intraparticle diffusion. Furthermore, PSAC demonstrated good reusability by its sustained adsorption capacity of BPA, which remained at 82.6% of the initial adsorption capacity even after four adsorption-desorption cycles. These findings highlight the potential of utilizing low-cost sycamore leaf biochar as an effective adsorbent for the removal of the endocrine disruptor BPA.

Conversion of solid wastes and natural biomass for deciphering the valorization of biochar in pollution abatement: A review on the thermo-chemical processes

This overview addresses the formation of solid trash and the various forms of waste from a variety of industries, which environmentalists have embraced. The paper investigates the negative effects on the environment caused by unsustainable management of municipal solid trash as well as the opportunities presented by the formal system. This examination looks at the origins of solid waste as well as the typical treatment methods. Pyrolysis methods, feedstock pyrolysis, and lignocellulosic biomass pyrolysis were highlighted. Explain in detail the various thermochemical processes that take place during the pyrolysis of biomass. Due to its carbon content, low cost, accessibility, ubiquitousness, renewable nature, and environmental friendliness, biomass waste is a unique biochar precursor. This study looks at the different types of biomass waste that are available for treating wastewater. This study discussed a wide variety of reactors. Adsorption is the standard method that is used the most frequently to remove hazardous organic, dye, and inorganic pollutants from wastewater. These pollutants cause damage to the environment and water supplies, thus it is important to remove them. Adsorption is both simple and inexpensive to utilize. Temperature-dependent conversions explain the kinetic theories of biomaterial biochemical degradation. This article presents a review that explains how pyrolytic breakdown char materials can be used to reduce pollution and improve environmental management.

Preparation of Biomass Biochar with Components of Similar Proportions and Its Methylene Blue Adsorption

Rapeseed straw, bagasse, and walnut peel have a large amount of resource reserves, but there are few technologies for high value-added utilization. In the research of biochar, walnut green husk is rarely used as raw material. In addition, the three main components of biomass (lignin, cellulose, and hemicellulose) are present in similar proportions, and the differences between the physical and chemical properties of biochar prepared with similar amounts of biomass raw materials are not clear. Using three kinds of biomass of the same quality as raw materials, biochar was prepared via pyrolysis at 400 °C, and activated carbon was prepared via CO2 activation at 800 °C. The results showed that the pore numbers of the three kinds of biochar increased after activation, resulting in the increase of the specific surface area. The resulting numbers were 352.99 m2/g for sugarcane bagasse biochar (SBB)-CO2, 215.04 m2/g for rapeseed straw biochar (RSB)-CO2, and 15.53 m2/g for walnut green husk biochar (WGB)-CO2. Ash increased the amount of carbon formation, but a large amount of ash caused biochar to form a perforated structure and decreased the specific surface area (e.g., WGB), which affected adsorption ability. When the three main components were present in similar proportions, a high content of cellulose and lignin was beneficial to the preparation of biochar. The adsorption value of MB by biochar decreased with the increase of biomass ash content. After activation, the maximum adsorption value of MB for bagasse biochar was 178.17 mg/g, rapeseed straw biochar was 119.25 mg/g, and walnut peel biochar was 85.92 mg/g when the concentration of methene blue solution was 300 mg/L and the biochar input was 0.1 g/100 mL at room temperature. The adsorption of MB by biochar in solution occurs simultaneously with physical adsorption and chemical adsorption, with chemical adsorption being dominant. The optimal MB adsorption by SBB-CO2 was dominated by multimolecular-layer adsorption. This experiment provides a theoretical basis for the preparation of biochar and research on its applications in the future.

Comparative study for sorption of arsenic on peanut shell biochar and modified peanut shell biochar

In this study, arsenite [As(III)] and arsenate [As(V)] removal efficiency of peanut shell biochar (PSB) and modified peanut shell biochar (MPSB) was compared in aqueous solutions. The modification was carried out with KMnO₄ and KOH. Sorption efficiency of MPSB was relatively higher than PSB at pH 6 for As(III) (86%) and for As(V) (91.26%) for initial concentration of 1 mg/L, adsorbent dose of 0.5 g/L and 240 min equilibrium time at 100 rpm. Freundlich isotherm and pseudo-second order kinetic model suggested possible multilayer chemisorption. Fourier transform infrared spectroscopy showed that -OH, C-C, CC and C-O-C groups contributed significantly in adsorption for both PSB and MPSB. Thermodynamic study showed that the adsorption process was spontaneous and endothermic. Regeneration studies revealed that PSB and MPSB can be successfully used for three cycles. This study established that peanut shell is a low-cost, environment friendly and efficient biochar for removal of arsenic from water.

Non-Isothermal Crystallization Kinetics of PBSu/Biochar Composites Studied by Isoconversional and Model Fitting Methods

Non-isothermal crystallization of Poly(butylene succinate) (PBSu)/biochar composites was studied at various constant cooling rates using differential scanning calorimetry. The analysis of the kinetics data revealed that the overall crystallization rate and activation energy of the PBSu polymer were significantly influenced by the addition of biochar. Specifically, the PBSu/5% biochar composite with a higher filler content was more effective as a nucleation agent in the polymer matrix, as indicated by the nucleation activity (ψ) value of 0.45. The activation energy of the PBSu/5% biochar composite was found to be higher than that of the other compositions, while the nucleation activity of the PBSu/biochar composites decreased as the biochar content increased. The Avrami equation, which is commonly used to describe the kinetics of crystallization, was found to be limited in accurately predicting the non-isothermal crystallization behavior of PBSu and PBSu/biochar composites. Although the Nakamura/Hoffman-Lauritzen model performed well overall, it may not have accurately predicted the crystallization rate at the end of the process due to the possibility of secondary crystallization. Finally, the combination of the Šesták-Berggren model with the Hoffman-Lauritzen theory was found to accurately predict the crystallization behavior of the PBSu/biochar composites, indicating a complex crystallization mechanism involving both nucleation and growth. The K_g parameter of neat PBSu was found to be 0.7099 K², while the melting temperature and glass transition temperature of neat PBSu were found to be 114.91 °C and 35 °C, respectively, very close to the measured values. The Avrami nucleation dimension n was found to 2.65 for PBSu/5% biochar composite indicating that the crystallization process is complex in the composites.

Influence of the surface modification of granular-activated carbon synthesized from macauba on heavy metal sorption

Adsorption on activated carbon is a promising technique for the treatment of low-concentration heavy metal pollutants in water with high efficiency and simple operation. However, commercial-activated carbon is often associated with high costs. Therefore, much attention has been given to activated carbon derived from low-cost agricultural and residual biomass. In this work, adsorption of Zn, Cd, and Pb ions in aqueous solutions was conducted using granular-activated carbon obtained from macauba palm, biomass waste of biofuel production, after surface modification using different methods. The adsorbents were obtained in granular form which facilitates all steps of the use, recovery, and reuse of the material, differently from the powdered-activated carbon normally used. The materials were characterized by using XPS, elemental analysis, N₂ sorption (BET method), and zeta potential measurements. Such techniques allowed observation of the functionalization of the carbon surface. The materials presented high adsorption capacities when compared to other works in the literature, with a capacity of approximately 7.69, 8.42, and 1.63 mmol g^-1 for Zn²⁺, Cd²⁺, and Pb²⁺, respectively. In addition, the materials showed a high capacity to be reused, removing 75% of Pb and 99% of both Cd and Zn after 4 cycles.

Modified biochar: synthesis and mechanism for removal of environmental heavy metals

With social progress and industrial development, heavy metal pollution in water and soils environment is becoming more serious. Although biochar is a low-cost and environmentally friendly adsorbent for heavy metal ions, its adsorption and immobilization efficiency still need to be improved. As an upgraded version of biochar, modified biochar has attracted extensive attention in the scientific community. This review summarized the recent research progress on the treatment methods on heavy metal pollutants in water and soils using biochar. The features and advantages of biochar modification techniques such as physical modification, chemical modification, biological modification and other categories of biochar were discussed. The mechanism of removing heavy metals from soil and water by modified biochar was summarized. It was found that biochar had better performance after modification, which provided higher surface areas and more functional groups, and had enough binding sites to combine heavy metal ions. Biochar is a very promising candidate for removing heavy metals in environment. Furthermore, some high valent metal ions could be reduced to low valent metals, such as Cr(VI) reduction to Cr(III), and form precipitates on biochar by in-situ sorption-reduction-precipitation strategy. However, it is still the direction of efforts to develop high-efficiency modified biochar with low-cost, high sorption capacity, high photocatalytic performance, environmentally friendly and no secondary pollution in future.

Adsorption performance and mechanism of cationic and anionic dyes by KOH activated biochar derived from medical waste pyrolysis

The massive generation of medical waste (MW) results in a series of environmental, social, and ecological problems. Pyrolysis is one such approach that has attracted more attention because of the production of value-added products with lesser environmental risk. In this study, the activated biochar (ABC600) was obtained from MW pyrolysis and activated with KOH. The adsorption mechanism of activated biochar on cationic (methylene blue) and anionic (reactive yellow) dyes were studied. The physicochemical characterization of biochar showed that increasing pyrolysis temperature and KOH activation resulted in increased surface area, a rough surface with a clear porous structure, and sufficient functional groups. MB and RYD-145 adsorption on ABC600 was more consistent with Langmuir isotherm (R² ≥ 0.996) and pseudo-second-order kinetics (R² ≥ 0.998), indicating chemisorption with monolayer characteristics. The Langmuir model fitting demonstrated that MB and RYD-145 had maximum uptake capacities of 922.2 and 343.4 mg⋅g^-1. The thermodynamics study of both dyes showed a positive change in enthalpy (ΔH°) and entropy (ΔS°), revealing the endothermic adsorption behavior and randomness in dye molecule arrangement on activated-biochar/solution surface. The activated biochar has excellent adsorption potential for cationic and anionic dyes; hence, it can be considered an economical and efficient adsorbent.

Raspberry stalks-derived biochar, magnetic biochar and urea modified magnetic biochar - Synthesis, characterization and application for As(V) and Cr(VI) removal from river water

Raspberry stalks-derived biochar (BC), magnetic biochar-iron oxide composite (BC-Fe) and its derivative modified with urea (BC-Fe-U) were synthesized, characterized and tested as(V) and Cr(VI) ion sorbents. The surface area of BC, BC-Fe and BC-Fe-U was 259, 163 and 117 m² g^-1, respectively. The structure of BC was dominated by micropores, while in BC-Fe and BC-Fe-U mesopores predominated. Based on the XRD results, it was found that the magnetic properties of the biochar-iron oxide composites are due to the presence of ferrimagnetic magnetite (Fe₃O₄) and maghemite (Fe₂O₃). The optimal pH of As(V) and Cr(VI) adsorption onto the studied sorbents is in the range of 2.3-5.7. Pristine biochar (BC) does not adsorb As(V) ions; however, it enables rapid adsorption of Cr(VI) with the static adsorption capacity of 19.2 mg g^-1. The maximum static adsorption capacities of As(V) and Cr(VI) ions onto BC-Fe and BC-Fe-U are within the range of 13.5-16.3 mg g^-1. For most adsorption systems tested, adsorption equilibrium is reached within 4 h, though even a few minutes is enough to reach half of the adsorption static value. Phosphates over 0.005 mol L^-1 hinder adsorption of As(V) and Cr(VI) ions. Application of at least 5 mol L^-1 nitric acid allows about 95% of Cr(VI) and As(V) to be desorbed from adsorbate-loaded BC-Fe material. For other materials, the desorption efficiencies are significantly lower. BC-Fe and BC-Fe-U materials were successfully used for simultaneous Cr(VI) and As(V) removal from river water.

Systematic Research on the Transport of Ball-Milled Biochar in Saturated Porous Media: Effect of Humic Acid, Ionic Strength, and Cation Types

Ball-milled biochar (BMBC) is a typical engineering material that has promising application prospects in remediating contaminated soil and water. It is fundamental to rate the transport behaviors of BMBC in the underground environment before extensive use. In this study, the effects of the ubiquitous cations (Na+, Mg2+, and Al3+) and model organic matter (humic acid) on the transport of BMBC were investigated using laboratory column experiments. The results demonstrated the facilitated effect of HA on the transport of BMBC due to the negatively charged surface and steric effect under neutral conditions. HA and ionic strength manifested an antagonistic effect on the transport of BMBC, where the presence of one could weaken the effect from the other. We also found the charge reversal of the BMBC surface in the presence of Mg2+, thus enhancing the deposition of BMBC onto the medium surface. On the other hand, the charge reversal from Al3+-coupled acid conditions led to the restabilization and transport of BMBC in porous media. Therefore, the rational usage of BMBC is indispensable and more attention should be paid to the composition and change in underground water that might facilitate the transport of BMBC and thus lead to negative environmental implications.

Adsorption of Arsenic on Fe-Modified Biochar and Monitoring Using Spectral Induced Polarization

This work demonstrates the potential of Fe-modified biochar for the treatment of arsenic (As) simulated wastewater and the monitoring of adsorption in real-time. Specifically, we propose the utilization of date-palm leaves for the production of biochar, further modified with Fe in order to improve its adsorption function against inorganic pollutants, such as As. Both the original biochar and the Fe-modified biochar were used for adsorption of As in laboratory batch and column experiments. The monitoring of the biochar(s) performance and As treatment was also enhanced by using the spectral induced polarization (SIP) method, offering real-time monitoring, in addition to standard chemical monitoring. Both the original and the Fe-modified biochar achieved high removal rates with Fe-modified biochar achieving up to 98% removal of As compared to the 17% by sand only (control). In addition, a correlation was found between post-adsorption measurements and SIP measurements.