Utilization of Bacillus cereus strain CGK5 associated with cow feces in the degradation of commercially available high-density polyethylene (HDPE)

Microbial degradation of low-density polyethylene (LDPE) and polystyrene using Bacillus cereus (OR268710) isolated from plastic-polluted tropical coastal environment

The study focused on marine bacteria, specifically Bacillus cereus, sourced from heavily polluted coastal areas in Tamil Nadu, aiming to assess their efficacy in degrading low-density polyethylene (LDPE) and polystyrene over a 42-day period. When LDPE and polystyrene films were incubated with Bacillus cereus, they exhibited maximum weight losses of 4.13 ± 0.81 % and 14.13 ± 2.41 %, respectively. Notably, polystyrene exhibited a higher reduction rate (0.0036 day-1) and a shorter half-life (195.29 days). SEM images of the treated LDPE and polystyrene unveiled surface erosion with cracks. The energy dispersive X-ray (EDX) analysis revealed elevated carbon content and the presence of oxygen in the treated LDPE and polystyrene films. The ATR-FTIR spectra exhibited distinctive peaks corresponding to functional groups, with observable peak shifts in the treated films. Notable increases were detected in carbonyl, internal double bond, and vinyl indices across all treated groups. Additionally, both treated LDPE and polystyrene showed reduced crystallinity. This research sheds light on Bacillus cereus (OR268710) biodegradation capabilities, emphasizing its potential for eco-friendly waste management in coastal regions.

Biodegradation of Typical Plastics: From Microbial Diversity to Metabolic Mechanisms

Plastic production has increased dramatically, leading to accumulated plastic waste in the ocean. Marine plastics can be broken down into microplastics (<5 mm) by sunlight, machinery, and pressure. The accumulation of microplastics in organisms and the release of plastic additives can adversely affect the health of marine organisms. Biodegradation is one way to address plastic pollution in an environmentally friendly manner. Marine microorganisms can be more adapted to fluctuating environmental conditions such as salinity, temperature, pH, and pressure compared with terrestrial microorganisms, providing new opportunities to address plastic pollution. Pseudomonadota (Proteobacteria), Bacteroidota (Bacteroidetes), Bacillota (Firmicutes), and Cyanobacteria were frequently found on plastic biofilms and may degrade plastics. Currently, diverse plastic-degrading bacteria are being isolated from marine environments such as offshore and deep oceanic waters, especially Pseudomonas spp. Bacillus spp. Alcanivoras spp. and Actinomycetes. Some marine fungi and algae have also been revealed as plastic degraders. In this review, we focused on the advances in plastic biodegradation by marine microorganisms and their enzymes (esterase, cutinase, laccase, etc.) involved in the process of biodegradation of polyethylene terephthalate (PET), polystyrene (PS), polyethylene (PE), polyvinyl chloride (PVC), and polypropylene (PP) and highlighted the need to study plastic biodegradation in the deep sea.

Characterization of Priestia megaterium S1, a polymer degrading gut microbe isolated from the gut of Tenebrio molitor larvae fed on Styrofoam

This study reveals that Tenebrio molitor larvae are fed with two different feeds i.e., barley bran along with Styrofoam, and barley bran without Styrofoam, the survival percentage of mealworms shows 86 and 89%, respectively. Five isolates namely S1, S2, S3, S4, and S5 were isolated from the gut of Styrofoam-feeding Tenebrio molitor larvae and tested for Hydrophobicity percentage, clear zone assay and turbidity measurement. S1 isolate showed best (turbidity percentage of 19.65%, 13.54% hydrophobicity percentage, and 37% zone of clearance) when compared to other isolates, respectively. 16S rRNA characterization of S1 isolate revealed that the isolate belongs to Priestia megaterium S1(ON024787). Biodegradation of PE and PS beads by Priestia megaterium S1 makes physical and structural changes over 180 days, after microbial adhesion to the beads. Growth parameters have shown that the Priestia megaterium S1 thrives more effectively in the pH (6.5), temperature (28 °C) and at 1.5% LDPE/HDPE/PS concentration there is maximum utilization of carbon and a high percentage survival rate. Significant colonization of the isolate after 30 days over beads of LDPE (52.47%), HDPE (49.26%), and PS (48.11%), respectively. Experimental data revealed that Priestia megaterium S1 have PE and PS beads degradation capacity, proven by weight loss studies, at 6th-month percentage weight loss of LDPE (36.1%), HDPE (31.9%), and PS (28.6%), the percentage loss of carbon and hydrogen shows higher when compared to control. One month Biological Oxygen Demand (BOD) showed that LDPE (7.4 mg/l), HDPE (7.2 mg/l), PS (6.7 mg/l), and simultaneous studies on CO2 evolution over LDPE treatment is 5.05 g/l, HDPE (4.26 g/l), and PS (3.91 g/l), respectively. Fourier Transform Infrared Spectroscopy (FTIR) and Scanning Electron Microscope (SEM) prove the occurrence of biodegradation on the surface of beads. This work highlights that Priestia megaterium S1 plays a vital role in effectively degrading PE and PS beads.

Recycling of Electrical Cables-Current Challenges and Future Prospects

Civilization and technical progress are not possible without energy. Dynamic economic growth translates into a systematic increase in demand for electricity. Ensuring the continuity and reliability of electricity supplies is one of the most important aspects of energy security in highly developed countries. Growing energy consumption results not only in the need to build new power plants but also in the need to expand and increase transmission capacity. Therefore, large quantities of electric cables are produced all over the world, and after some time, they largely become waste. Recycling of electric cables focuses on the recovery of metals, mainly copper and aluminum, while polymer insulation is often considered waste and ends up in landfills. Currently, more and more stringent regulations are being introduced, mainly environmental ones, which require maximizing the reduction in waste. This article provides a literature review on cable recycling, presenting the advantages and disadvantages of various recycling methods, including mechanical and material recycling. It has been found that currently, there are very large possibilities for recycling cables, and intensive scientific work is being carried out on their development, which is consistent with global climate policy.