Simultaneous determination of five synthetic antioxidants in edible vegetable oil by GC–MS

Highly Sensitive Electrochemical Determination of Butylated Hydroxyanisole in Food Samples Using Electrochemical-Pretreated Three-Dimensional Graphene Electrode Modified with Silica Nanochannel Film

The sensitive detection of antioxidants in food is essential for the rational control of their usage and reducing potential health risks. A simple three-dimensional (3D) electrode integrated with an anti-fouling/anti-interference layer possesses great potential for the direct and sensitive electrochemical detection of antioxidants in food samples. In this work, a 3D electrochemical sensor was developed by integrating a 3D graphene electrode (3DG) with vertically ordered mesoporous silica film (VMSF), enabling highly sensitive detection of the common antioxidant, butylated hydroxyanisole (BHA), in food samples. A simple electrochemical polarization was employed to pre-activate the 3DG electrode (p3DG), enhancing its hydrophilicity. Using the p3DG as the supporting electrode, stable modification of VMSF was achieved using the electrochemical assisted self-assembly (EASA) method, without the need for any adhesive agents (VMSF/p3DG). Taking BHA in food as a model analyte, the VMSF/p3DG sensor demonstrated high sensitivity, due to the enrichment by nanochannels, towards BHA. Electrochemical detection of BHA was achieved with a linear range of 0.1 μM to 5 μM and from 5 μM to 150 μM with a low limit of detection (12 nM). Owing to the fouling resistance and anti-interference capabilities of VMSF, the constructed 3D electrochemical sensor can be directly applied for the electrochemical detection of BHA in complex food samples.

Spectrofluorimetric determination of butylated hydroxytoluene and butylated hydroxyanisole in their combined formulation: application to butylated hydroxyanisole residual analysis in milk and butter

Butylated hydroxytoluene (BHT) and butylated hydroxyanisole (BHA) are two antioxidants that have been extensively used in many applications. Both are well known for their debatable health risks due to their multiple intake sources. Therefore, conservative limits are set for them in different regulations adapted to the matrices in which they exist. Here we present a simple spectrofluorimetric method for the determination of BHT and BHA based on their native fluorescence and synchronous scanning mode. The type of solvent and the interval between emission and excitation wavelengths were carefully optimized. Under the optimized conditions, good linearities were obtained between the emission intensity and the corresponding concentrations of BHT and BHA over the range of 3-18 µg/mL and 0.1-7 µg/mL, respectively with a good correlation coefficient (r > 0.99). The limits of detection were 0.9 and 0.02 µg/mL, and the quantification limits were 3 and 0.05 µg/mL for BHT and BHA, respectively. The suggested procedure was validated according to ICH guidelines Q2 (R1). Furthermore, the method's greenness was assessed by three different methods, and it proved to be eco-reasonable. The method was successfully applied to the determination of BHT and BHA in pharmaceutical formulations. We also applied the suggested method for monitoring the residual BHA in conventional, powdered milk and butter, with good recovery in spiked samples.

Efficient Role of Endophytic Aspergillus terreus in Biocontrol of Rhizoctonia solani Causing Damping-off Disease of Phaseolus vulgaris and Vicia faba

The wide spread of plant pathogens affects the whole world, threatening national food security. Various fungi including Rhizoctonia solani induce the fungal disease damping-off that negatively affects plant seedlings' growth. Recently, endophytic fungi are used as safe alternatives to chemical pesticides that harm plant and human health. Here, an endophytic Aspergillus terreus was isolated from Phaseolus vulgaris seeds to control damping-off diseases by improving the defense system in Phaseolus vulgaris and Vicia faba seedlings. Endophytic fungus was morphologically and genetically identified Aspergillus terreus, and it is deposited in GeneBank under accession OQ338187. A. terreus demonstrated antifungal efficacy against R. solani with an inhibition zone at 22.0 mm. Moreover, the minimum inhibitory concentrations (MIC) of ethyl acetate extract (EAE) of A. terreus were between 0.3125 and 0.625 mg/mL to inhibit R. solani growth. Precisely 58.34% of the Vicia faba plants survived when A. terreus was added compared with the untreated infected (16.67%). Similarly, Phaseolus vulgaris achieved 41.67% compared to the infected (8.33%). Both groups of treated infected plants showed reduced oxidative damage (reduced Malondialdehyde and hydrogen peroxide levels) as compared to untreated infected plants. Reduced oxidative damage was correlated with the increase in photosynthetic pigments and the antioxidant defense system including polyphenol oxidase, peroxidase, catalase, and superoxide dismutase enzyme activities. Overall, the endophytic A. terreus can be considered an effective tool to control the suppression of Rhizoctonia solani in legumes, especially Phaseolus vulgaris and Vicia faba, as an alternative to synthetic chemical pesticides that harm the environment and human health.

Promising Endophytic Alternaria alternata from Leaves of Ziziphus spina-christi: Phytochemical Analyses, Antimicrobial and Antioxidant Activities

Fungal endophytes are considered one of the most important reservoirs of bioactive compounds which defeat resistant microbes. In our study, endophytic Alternaria alternata was isolated from Ziziphus spina-christi and identified morphologically and genetically with accession number OM 331,682. Preliminary phytochemical screening of ethyl acetate (EA) crude extract of A. alternata revealed that this extract contains alkaloids, tannins, flavonoids, glycosides, phenols, and terpenoids. Moreover, the extract was analyzed using gas chromatography-mass spectrometry (GC–MS) which verified the presence of numerous bioactive compounds. Antimicrobial results illustrated that EA crude extract exhibited promising antimicrobial activity against Gram-negative bacteria (Escherichia coli ATCC 11229, Proteus vulgaris RCMB 004, Pseudomonas aeruginosa ATCC 27853, and Klebsiella pneumonia RCMB 003), Gram-positive bacteria (Bacillus subtilis RCMB 015, Staphylococcus aureus ATCC 25923, and Staphylococcus epidermidis ATCC 14990), and unicellular fungi (Candida albicans ATCC 90028). Ultrastructure study of treated K. pneumonia showed remarkably elucidated destruction of the cell wall and cell membrane and leakage of cytoplasmic materials. Furthermore, the extract has potential antioxidant activity where IC₅₀ was 409 µg/mL. Moreover, this extract did not show any toxicity on Vero normal cell line. These findings confirmed that the endophytic A. alternata from Z. spina-christi is a promising source of bioactive compounds which can be used in different biological applications.

Alarming impact of the excessive use of tert-butylhydroquinone in food products: A narrative review

Tert-butyl hydroquinone (TBHQ) is a food additive commonly used as a more effective protectant in the food, cosmetic and pharmaceutical industries. However, the long-term exposure to TBHQ at higher doses (0.7 mg/kg) results in substantial danger to public health and brings a series of side effects, including cytotoxic, genotoxic, carcinogenic, and mutagenic effects. As a result, the global burden of chronic diseases has fascinated consumers and governments regarding the safety assessment of food additives. Regarding contradictory reports of various research about the application of food additives, the accurate monitoring of food additives is urgent. Notwithstanding, there are reports of the therapeutic effects of TBHQ under pathologic conditions through activation of nuclear factor erythroid 2-related factor 2. Thus, further investigations are required to investigate the impact of TBHQ on public health and evaluate its mechanism of action on various organs and cells. Therefore, this review aimed to investigate TBHQ safety through an overview of its impacts on different tissues, cells, and biological macromolecules as well as its therapeutic effects under pathologic conditions.

Analysis, occurrence, toxicity and environmental health risks of synthetic phenolic antioxidants: A review

The continuous improvement of living standards is related to higher requirements for the freshness and taste of food. For example, synthetic phenolic antioxidants (SPAs) are added to fats and fried foods as food additives to minimize the oxidative rancidity of oils and fats. Hence, the global use of SPAs is increasing year by year. Dibutyl hydroxytoluene is one of the widely used SPAs, often in combination with butyl hydroxyanisole or gallate SPAs. The extensive use of these compounds makes them and their transformation products to be widespread in various environmental matrices, including indoor dust, wastewater, river water, sewage sludge, and sediment, as well as human samples, such as nails and urine, at concentrations varying from nanogram per gram (ng/g) to microgram per gram (μg/g). Animal experiments have shown that high-dose SPA exposure is toxic, which may lead to DNA damage and mismatches and the development of cancerous tumors. Since the biosphere shares the same set of genetic codes, humans and animals have many identical or similar feedback mechanisms and information pathways. Therefore, the damage of SPAs to animals may also threaten human health. This review discusses the properties, occurrence, analysis, and environmental health risks of typical SPAs, including butyl hydroxyanisole, dibutyl hydroxytoluene, tert-butylhydroquinone, propyl gallate, octyl gallate, and lauryl gallate, used as food additives. In addition, AO2246, which is used in food packaging bags, is also considered. Future research directions on SPAs and their transformation products (TPs) are identified and discussed.

Selection of extraction solvents for edible oils from microalgae and improvement of the oxidative stability

Microalgae are natural, green raw material and could be used for the development of edible oil for its abundant polyunsaturated fatty acids, with fast growth rate. The wet mud and dry powder of Scenedesmus dimorphus were applied to compare the extraction effects of different organic solvent systems in this study. The results displayed that, by using the ethanol/n-hexane (3:2, v/v) mixed solvent, the oil extraction rate from wet algal mud was 68.31 %, with 71.65 % of neutral lipid, and 1.87 % of vitamin E; the retention rates of protein, chlorophyll, and carbohydrates in the algal residue after oil extraction were 60.56 %, 53.27 %, and 80.20 %, respectively. Through the single solvent n-hexane, the oil extraction rate from dried algal powder was 71.52 %, with 75.86 % of neutral lipids, and 1.63 % of vitamin E. The retention rates of protein, chlorophyll, and carbohydrate were 55.92 %, 61.33 % and 78.35 %, respectively, suggesting the high rate of nutrient retention. In addition, the orthogonal experiments indicated that the compound of low concentration natural antioxidants with 0.010 % of tea polyphenols, 0.005 % of vitamin E, and 0.015 % of rosemary extract had the best effects on improvement of oxidative stability.

Analysis of synthetic antioxidants in salmon silage using QuEChERS extraction method followed by determination by LC-MS/MS; a single-laboratory validation study

A new method was developed and in-house validated to determined ethoxyquin (EQ), butylated hydroxyanisole (BHA) and propyl gallate (PG) in fish silage and fish oil used for production of animal feed. Sample pre-treatment comprises use of QuEChERS (quick, easy, cheap, effective, rugged and safe) extraction and gives extracts for liquid chromatography-triple quadrupole mass spectrometry analysis without matrix interferences. The results allow quantification of the antioxidants in all matrices by using deuterated internal standards and calibration curves made in solvent, as well as establishing low detection limits (0.012-0.015 mg/kg) and quantification limits (0.040-0.050 mg/kg) needed regarding the recent suspension of EQ as feed additive within the European Union. The proposed method was validated in terms of linearity, accuracy (relative error, ±1.4%), precision (RSD, ≤2.7%) and recovery (matrix effect, 97-101%) where all the parameters show acceptable results according to recognized guidelines (including EuraChem) within method validation. Combined expanded measurement uncertainty was estimated with a coverage factor of 2 by including all contributors to analytical variation, showing results of ±15% or better. The combined QuEChERS and LC-MS/MS method was successfully applied to salmon silage samples and their corresponding aqueous and oil fractions.

Fungal endophytes from leaves of Avicennia marina growing in semi-arid environment as a promising source for bioactive compounds

Endophytic fungi are broadly dispersed residing inside plant tissues and have been demonstrated as a treasure for bioactive natural products. Unexplored harsh and heavy metal contaminant habitat of Avicennia marina may have diverse and potential fungal association. Therefore, this work aimed to isolate the culturable fungal endophytes associated with leaves of A. marina and to evaluate their medical potentialities. Seventeen isolates of endophyte fungi were isolated from healthy leaves and their antimicrobial activities were evaluated. Results showed that isolates had activity against micro-organisms in addition to their antioxidant activity produced a variety of phenolic compounds, besides exhibited a lowest cytotoxicity against ATCC-CCL-81 cell line. Consequently, selected endophytic fungal isolates were identified genetically as Chaetomium sp., Chaetomium madrasense, Chaetomium sp., Chaetomium globosum, Aspergillus hiratsukae, Aspergillus ochraceus, Alternaria tenuissima and Curvularia lunata with gene bank accession numbers MT089951, MT089952, MT089953, MT089954, MT089955, MT089956, MT089957 and MT089958 respectively. The most potent fungus extract was analysed using Gas chromatography-mass spectrometry which verified the presence of numerous bioactive compounds. These findings confirmed that new endophytic fungal strains derived from A. marina thrive in harsh ecosystem produce bioactive metabolites which can be recommended as a novel source for drug discovery.

Effects of Food Constituents on Absorption and Bioaccessibility of Dietary Synthetic Phenolic Antioxidant by Caco-2 Cells

One typical synthetic phenolic antioxidant 2,6-di-tert-butyl-hydroxytoluene (BHT) is widely used in foodstuff. Concerns are rising on the toxicity of BHT and its metabolites through dietary exposure. In this study, the effects of food macronutrients (i.e., lipid, carbohydrate, fiber, protein, and fasted (as control)) on absorption and bioaccessibility of BHT by Caco-2 cells were investigated. Food components decreased the absorption and bioaccessibility by Caco-2 cells. The highest absorption rate by Caco-2 cells was fasted state (first-order rate constant = 4.26 h^-1), followed by carbohydrate (2.36 h^-1), fiber (1.39 h^-1), lipid (1.34 h^-1), and protein (1.15 h^-1). The order of bioaccessibility of BHT and its metabolites was fasted (100 ± 11.5%) > protein (83.1 ± 2.69%) > fiber (65.8 ± 2.67%) > carbohydrate (56.8 ± 1.58%) ≈ lipid (56.7 ± 0.82%). A solid-phase microextraction test together with a computational in vitro kinetic model suggested that the macronutrients may bind to BHT to reduce its free concentration and decrease the bioaccessibility. To our knowledge, this is the first study to report food influence on the absorption and bioaccessibility of BHT by Caco-2 cells. Results here can provide important implications for the safety regulation for dietary synthetic phenolic antioxidants.

Occurrence of plastic additives in outdoor air particulate matters from two industrial parks of Tarragona, Spain: Human inhalation intake risk assessment

Plastic additives include several kinds of chemicals that are added to the polymer matrix to improve the final product quality and prevent deterioration effects. They are used in a large quantity of materials, so their presence in the environment is expected. This study has developed and validated a method based on gas chromatography-mass spectrometry after pressurised liquid extraction to determine sixteen plastic additives including UV-stabilizers, aromatic and phenolic antioxidants and some of their degradation products in particulate matter (PM₁₀) from outdoor air. Apparent recoveries were above 85% for most of compounds and low detection limits (pg m^-3) were achieved. This is the first study to determine these types of contaminant in the PM₁₀ of outdoor air from two locations surrounded by different industries. Various compounds were found in almost all samples; BHT, BHT-Q, 2,4-DTBP, BHT-CHO, UV320, UV328, Irgafos168 and Iragonx1076, with concentrations ranging from < MQL to 2860 pg m^-3. Estimated daily intakes (EDIs) via ambient inhalation were calculated for each polymer additive and for different subpopulation groups classified by age. Two possible exposure scenarios (low, based on geometric mean, and high, 95th percentile) were simulated, and 0.51 ng kg_bw^-1 day^-1 was the EDI in the worst case scenario for children.

Determination of the Synthetic Antioxidant Ethoxyquin and Its Metabolites in Fish and Fishery Products Using Liquid Chromatography-Fluorescence Detection and Stable-Isotope Dilution Analysis-Liquid Chromatography-Tandem Mass Spectrometry

The use of the synthetic antioxidant ethoxyquin (1,2-dihydro-6-ethoxy-2,2,4-trimethylquinoline, EQ) as a flame retardant in fish meal transported by sea is required by international authorities to prevent self-ignition. Because of extensive carry-over within the food chain, selective and sensitive analytical methods are required for investigations on human exposure and the safety of EQ and its metabolites. Therefore, a simple, fast, and rugged liquid-chromatography (LC) method was developed for the detection of EQ and its metabolites in fish and fishery products after liquid-liquid extraction using QuEChERS. For screening purposes, a fluorescence detector was used (LC-FLD) with the EQ-analogue methoxyquin serving as an internal standard. For stable-isotope dilution analysis by liquid chromatography-tandem mass spectrometry (SIDA-LC-MS/MS), deuterated analogues of EQ and its metabolites were synthesized for the first time and allowed for sensitive quantification and thus confirmation of screening results. Both methods were validated and successfully applied to commercially available fish samples.

Determination of 2,6-di-tert-butyl-hydroxytoluene and its transformation products in indoor dust and sediment by gas chromatography-mass spectrometry coupled with precolumn derivatization

We developed an analytical method to simultaneously determine 2,6-di-tert-butyl-hydroxytoluene (BHT) and its four transformation products in indoor dust and sediment samples. BHT, 2,6-di-tert-butylcyclohexa-2,5-diene-1,4-dione (BHT-Q), and 3,5-di-tert-butyl-4-hydroxybenzaldehyde (BHT-CHO) were measured by gas chromatography-mass spectrometry (GC-MS) after ultrasonic extraction with hexane/dichloromethane (1:3), while 2,6-di-tert-butyl-4-(hydroxymethyl) phenol (BHT-OH) and 3,5-di-tert-butyl-4-hydroxybenzoic acid (BHT-COOH) were derivatized using N, O-bis (trimethylsilyl) trifluoroacetamide before GC-MS analysis. The limits of detection (LODs) and quantification (LOQs) of the developed method were 0.02-0.34 and 0.08-1.14ngg^-1. The recoveries for BHT and its transformation products were 71.1-118% with relative standard deviations <10.6% at different spiking levels. The method was applied to indoor dust and sediment samples, showing that BHT was found in all samples with concentrations being 0.22-47.37μgg^-1 in dust and 0.09-6.93μgg^-1 in sediment. BHT-Q was the dominant transformation product, followed by BHT-CHO, BHT-OH, and BHT-COOH. Different metabolite profiles for BHT indicated various transformation pathways, making it necessary to study their transformation mechanism and environmental behaviors in the future studies.

Simultaneous analysis of tert-butylhydroquinone, tert-butylquinone, butylated hydroxytoluene, 2-tert-butyl-4-hydroxyanisole, 3-tert-butyl-4-hydroxyanisole, α-tocopherol, γ-tocopherol, and δ-tocopherol in edible oils by normal-phase high performance liquid chromatography

A normal-phase high performance liquid chromatography method for the simultaneous determination of tert-butylhydroquinone, tert-butylquinone, butylated hydroxytoluene, 2-tert-butyl-4-hydroxyanisole, 3-tert-butyl-4-hydroxyanisole, α-tocopherol, γ-tocopherol, and δ-tocopherol in edible oils was investigated. A silica column was used to separate the analytes with the gradient elution. An ultraviolet-visible detector was set at dual wavelengths mode (280 and 310nm). The column temperature was 30°C. The analytes were directly extracted with methanol. Results showed that the normal-phase high performance liquid chromatography method performed well with wide liner ranges (0.10∼500.00μg/mL, R²>0.9998), low limits of detection and quantitation (below 0.40 and 1.21μg/mL, respectively), and good recoveries (81.38∼102.34% in soybean oils and 83.03∼100.79% in lard, respectively). The reduction of tert-butylquinone caused by the reverse-phase high performance liquid chromatography during the injection was avoided with the current normal-phase method. The two isomers of butylated hydroxyanisole can also be separated with good resolution.

Impact of synthetic antioxidants on lipid peroxidation of distiller's dried grains with solubles and distiller's corn oil stored under high temperature and humidity conditions

This experiment evaluated the effect of antioxidants, oil content in distiller's dried grains with solubles (DDGS), quality of distiller's corn oil, and storage time on lipid peroxidation. A source of low-oil DDGS (LO-DDGS; 5.0% ether extract [EE], as-fed basis), high-oil DDGS (HO-DDGS; 13.0% EE, as-fed basis), and 2 sources of distiller's corn oil (DCO; 1.20, 0.08, and 0.48% moisture, insoluble impurities, and unsaponifiables [MIU], respectively [DCO-1], and 1.20, 0.01, and 0.10% MIU, respectively [DCO-2]) were obtained. Each of the 4 ingredients was divided into 18 representative subsamples (approximately 908 g for DDGS or 2 kg of DCO). Six subsamples of each ingredient were mixed with either no supplemental antioxidants (CON), Rendox-CQ (REN; 1,000 mg/kg EE; Kemin, Industries, Des Moines, IA), or Santoquin-Q4T (SAN; 1,500 mg/kg EE; Novus International, St. Louis, MO). Each mixture ( = 72) was split into thirds, and 1 portion was immediately frozen at -20°C (d 0). Two portions were stored under hot (38.6 ± 0.1°C) and humid conditions (94.0 ± 0.3% relative humidity) for 14 or 28 d. The MIXED procedure of SAS was used to evaluate the effects of ingredient, antioxidant, storage time, and interactions, with d-0 values used as a covariate. From d 14 to 28, peroxide value (PV), -anisidine value (AnV), and thiobarbituric acid reactive substances (TBARS) of DCO and DDGS increased by 3- to 4-fold ( < 0.05). Over the entire storage period, PV of DCO-1 and HO-DDGS (12.3 ± 0.3 and 12.6 ± 0.3 mEq O/kg oil, respectively) exceeded ( < 0.05) that of DCO-2 and LO-DDGS (9.6 ± 0.3 and 9.3 ± 0.3 mEq O/kg oil, respectively). Adding REN or SAN ( < 0.05) reduced TBARS and AnV relative to CON (TBARS = 11.0 ± 0.2 mg malondialdehyde Eq/kg oil and AnV = 6.5 ± 0.2) over the entire period (mean of d 14 and 28), but TBARS and AnV did not differ ( > 0.05) between antioxidants (TBARS = 6.1 ± 0.2 and 5.9 ± 0.2 mg malondialdehyde Eq/kg oil, respectively, and AnV = 1.9 ± 0.2 and 1.8 ± 0.2 for REN and SAN, respectively). The PV on d 14 and 28 and overall was less ( < 0.05) when either antioxidant was added relative to CON (16.0 mEq O/kg) and was greater for ingredients treated with SAN ( < 0.05) compared with REN (8.8 ± 0.2 and 8.0 ± 0.2 mEq O/kg oil for SAN and REN, respectively). In summary, antioxidants reduced peroxidation of DDGS and DCO by approximately 50% during 28 d of storage at 38.6°C and 94.0% relative humidity, but neither antioxidant completely stabilized the ingredients.

Simultaneous Analysis of Tertiary Butylhydroquinone and 2-tert-Butyl-1,4-benzoquinone in Edible Oils by Normal-Phase High-Performance Liquid Chromatography

During the process of antioxidation of tertiary butylhydroquinone (TBHQ) in oil and fat systems, 2-tert-butyl-1,4-benzoquinone (TQ) can be formed. The toxicity of TQ was much more than that of TBHQ. In the work, a normal-phase high-performance liquid chromatography (NP-HPLC) method for the accurate and simultaneous detection of TBHQ and TQ in edible oils was investigated. A C18 column was used to separate TBHQ and TQ, and the gradient elution solutions consisted of n-hexane containing 5% ethyl acetate and n-hexane containing 5% isopropanol. The ultraviolet (UV) detector was set at dual wavelength mode (280 nm for TBHQ and 310 nm for TQ). The column temperature was 30 °C. Before the NP-HPLC analysis, TBHQ and TQ were first extracted by methanol, subjected to vortex treatment, and then filtered through a 0.45 μm membrane filter. Results showed that linear ranges of TBHQ and TQ were both within 0.10-500.00 μg/mL (R(2) > 0.9999). The limit of detection (LOD) and limit of quantification (LOQ) of TBHQ and TQ were below 0.30 and 0.91 μg/mL and below 0.10 and 0.30 μg/mL, respectively. The recoveries of TBHQ and TQ were 98.92-102.34 and 96.28-100.58% for soybean oil and 96.11-99.42 and 98.83-99.24% for lard, respectively. These results showed that NP-HPLC can be successfully used to analyze simultaneously TBHQ and TQ in the oils and fats.

Determination of synthetic phenolic antioxidants in soft drinks by stir-bar sorptive extraction coupled to gas chromatography-mass spectrometry

The synthetic phenolic antioxidants butylated hydroxyanisole (BHA), butylated hydroxytoluene (BHT) and tert-butyl hydroquinone (TBHQ) were pre-concentrated by stir-bar sorptive extraction and thermally desorbed (SBSE-TD) before analysis by GC-MS. Several parameters affecting the derivatisation step and both SBSE extraction and thermal desorption were carefully optimised. When the analyses of BHA and TBHQ in their acetylated, silylated and underivatised forms were compared, the best results were obtained when the in-situ derivatisation procedure with acetic anhydride was employed. Quantification was carried out using carvacrol as the internal standard, providing quantification limits of between 0.11 and 0.15 ng ml(-1), depending on the compound. Recovery assays for samples spiked at two concentration levels, 1 and 5 ng ml(-1), provided recoveries in the 81-117% range. The proposed method was applied in the analysis canned soft drinks and the analytes were found in five of the 10 samples analysed.

Preconcentration of synthetic phenolic antioxidants by using magnetic zeolites derived with carboxylatocalix[4]arenes combined with high performance liquid chromatography

A hybrid adsorbent assembling carboxylatocalix[4]arene onto the surface of magnetic zeolite was prepared and used for the preconcentration and determination of synthetic phenolic antioxidants coupled with HPLC.

Preparation of organogel with tea polyphenols complex for enhancing the antioxidation properties of edible oil

Food-grade organogels are semisolid systems with immobilized liquid edible oil in a three-dimensional network of self-assembled gelators, and they are supposed to have a broad range of potential applications in food industries. In this work, an edible organogel with tea polyphenols was developed, which possesses a highly effective antioxidative function. To enhance the dispersibility of the tea polyphenols in the oil phase, a solid lipid-surfactant-tea polyphenols complex (organogel complex) was first prepared according to a novel method. Then, a food-grade organogel was prepared by mixing this organogel complex with fresh peanut oil. Compared with adding free tea polyphenols, the organogel complex could be more homogeneously distributed in the prepared organogel system, especially under heating condition. Furthermore, the organogel loading of tea polyphenols performed a 2.5-fold higher antioxidation compared with other chemically synthesized antioxidants (butylated hydroxytoluene and propyl gallate) by evaluating the peroxide value of the fresh peanut oil based organogel in accelerated oxidation conditions.

Simple simultaneous determination of butylated hydroquinone (TBHQ) and butylated hydroxyanisole (BHA) antioxidants in oil using high-performance liquid chromatography with chemiluminescence detection

A highly sensitive and convenient high-performance liquid chromatography technique coupled with chemiluminescence detection for the simultaneous determination butylated hydroquinone (TBHQ) and butylated hydroxyanisole (BHA) in oil is established. The detection is based on the inhibitory effect on the CL reaction between luminol and potassium ferricyanide in an alkaline medium. Samples were separated through a reverse-phase C18 column using a mobile phase of methanol and water (80: 20, v/v) at a flow rate of 0.5 mL/min. The effects of various parameters including mobile phase, flow rate and chemiluminescence regent were studied. Under optimum conditions, both TBHQ and BHA showed good linear relationships in the range 1 × 10(-7) -1 × 10(-5) g/mL with detection limits of 24 and 33 ng/mL, respectively. The proposed method is simple and sensitive, with low costs. The method was successfully applied for the quantification of TBHQ and BHA in sesame oil. The possible inhibition mechanism is also discussed briefly.

Voltammetric determination of TBHQ at a glassy carbon electrode surface activated by in situ chemical oxidation

Bare GCE surface is directly activated by in situ chemical method, and the modified GCE exhibits a rougher surface and a negative-charge characteristic.