Recent applications of liquid chromatography–mass spectrometry to residue analysis of antimicrobials in food of animal origin

A review of biomolecules conjugated lanthanide up-conversion nanoparticles-based fluorescence probes in food safety and quality monitoring applications

Upconversion nanoparticles (UCNPs) are known to possess unique characteristics, which allow them to overcome a number of issues that plague traditional fluorescence probes. UCNPs have been employed in a variety of applications, but it is arguably in the realm of optical sensors where they have shown the most promise. Biomolecule conjugated UCNPs-based fluorescence probes have been developed to detect and quantify a wide range of analytes, from metal ions to biomolecules, with great specificity and sensitivity. In this review, we have given much emphasis on the recent trends and progress in the preparation strategies of bioconjugated UCNPs and their potential application as fluorescence sensors in the trace level detection of food industry-based toxicants and adulterants. The paper discusses the preparation and functionalisation strategies of commonly used biomolecules over the surface of UCNPs. The use of different sensing strategies namely heterogenous and homogenous assays, underlying fluorescence mechanisms in the detection process of food adulterants are summarized in detail. This review might set a precedent for future multidisciplinary research including the development of novel biomolecules conjugated UCNPs for potential applications in food science and technology.

Selenium-based nanozyme as a fluorescence-enhanced probe and imaging for chlortetracycline in living cells and foods

Developing rapid monitoring methods to detect antibiotic residues in food plays an important role in safeguarding human health. This study presents the development of a novel fluorescence-enhanced detection method for chlortetracycline (CTC) using a GSH-Se nanozyme. A GSH-Se nanozyme prepared using a one-pot hydrothermal method not only possesses excellent fluorescent properties but also exhibits good glutathione peroxidase-like activity. The results show that the addition of CTC leads to a significant enhancement in the fluorescence intensity of GSH-Se, and this increase exhibits a good linear relationship with the concentration of CTC. The linear range of this method is 0.02-1 µM, and the limit of detection (LOD) for CTC was 0.02 µM. Moreover, the cell toxicity of GSH-Se is low and can be used for monitoring and imaging of CTC in cells, and satisfactory results have been obtained in the analysis of actual food samples.

Current Progress in Natural Degradation and Enhanced Removal Techniques of Antibiotics in the Environment: A Review

Antibiotics are used extensively throughout the world and their presence in the environment has caused serious pollution. This review summarizes natural methods and enhanced technologies that have been developed for antibiotic degradation. In the natural environment, antibiotics can be degraded by photolysis, hydrolysis, and biodegradation, but the rate and extent of degradation are limited. Recently, developed enhanced techniques utilize biological, chemical, or physicochemical principles for antibiotic removal. These techniques include traditional biological methods, adsorption methods, membrane treatment, advanced oxidation processes (AOPs), constructed wetlands (CWs), microalgae treatment, and microbial electrochemical systems (such as microbial fuel cells, MFCs). These techniques have both advantages and disadvantages and, to overcome disadvantages associated with individual techniques, hybrid techniques have been developed and have shown significant potential for antibiotic removal. Hybrids include combinations of the electrochemical method with AOPs, CWs with MFCs, microalgal treatment with activated sludge, and AOPs with MFCs. Considering the complexity of antibiotic pollution and the characteristics of currently used removal technologies, it is apparent that hybrid methods are better choices for dealing with antibiotic contaminants.

Determination of Nitrofuran Metabolites in Complex Food Matrices Using a Rough, Cheap, Easy-Made Wooden-Tip-Based Solid-Phase Microextraction Probe and LC-MS/MS

In this study, a rough, cheap, easy-made wooden-tip-based solid-phase microextraction (SPME) probe was first developed for simultaneous determination of 4 nitrofuran metabolite derivatives in complex food matrices via LC-MS/MS. A simple dip-coating method was used to coat wooden tips with biocompatible polyacrylonitrile (PAN) and N-vinylpyrrolidone-co-divinylbenzene, also known as HLB particles, which served as the extractive substrate in the proposed device. Compared with the traditional solid-phase extraction (SPE) method, the proposed device shortens sample clean-up time, reduces solvent consumption, and decreases testing costs. In addition, the main parameters affecting the SPME procedure efficiency were investigated in detail and the optimal conditions were found. The method was validated using three different food matrixes (pork, croaker, and honey) by spiking with the four metabolites at 0.5, 1.0, and 5.0 μg/kg, as well as their internal standards. The average recovery of all nitrofuran metabolite derivatives ranges from 97.4–109.5% (pork), 87.5–112.7% (croaker), and 98.6–109.0% (honey). Relative standard deviations were all <10% for intraday and interday precision. The values of limit of detection and limit of quantification were, respectively, ranging from 0.011 to 0.123 and 0.033 to 0.369 μg/kg (pork), 0.009 to 0.112 and 0.027 to 0.339 μg/kg (croaker), and 0.010 to 0.131 and 0.030 to 0.293 μg/kg (honey). The presented method was applied to the analysis of real positive samples.

An approach to determining the nitrofurazone-induced toxic dynamics for ecotoxicity assessment using protozoan periphytons in marine ecosystems

With several observable responses and sensitivity of protozoans to nitrofurazone (NFZ), the toxic effects of NFZ on protozoans can be an early warning signal of NFZ contamination in the aquatic environment. To evaluate the toxic dynamics induced by NFZ, protozoan samples were collected using microscopy glass slides and exposed to the five concentrations of NFZ: 0, 1, 2, 4, and 8 mg ml^-1. Substantial differences in the species composition and toxic-dynamics patterns were observed among all concentrations. Briefly, periphytic euplotids and pleurostomatids were the most prevalent at each concentration level, while dysteriids were less dominant among all treatments. Multivariate analysis revealed significant (P < 0.05) differences in the taxonomic patterns of the test organisms among the five treatments. Furthermore, significant deviation of protozoan communities from the expected taxonomic breadth was observed to occur in a dose-dependent manner. Based on these findings, it is suggested that protozoan periphytons could be used as bioindicators to assess the ecotoxicity of NFZ in the marine environment.

Highly sensitive SERS detection of residual nitrofurantoin and 1-amino-hydantoin in aquatic products and feeds

Nitrofurantoin (NFT), a typical highly effective nitrofuran antibiotic drug, has been prohibited but still widely found in animal food products. It can be metabolized in animals to form 1-amino-hydantoin (AHD) that can then form stable and toxic metabolite-protein adducts. Hence, the detection of NFT and AHD in aquatic products and feeds is very important. However, there are limited reports concerning NFT detection and none about AHD by using surface-enhanced Raman spectroscopy (SERS) method. Herein, potassium bromide (KBr) decorated silver (Ag) nanoparticles (Ag-BrNPs)-based SERS approach was proposed for NFT and AHD detection. The limit of detection (LOD) for NFT was 1 μg/L. The detection of NFT residues in sea cucumber and fish feeds was also realized with the LOD of 1 and 50 ng/g, respectively. More importantly, the sensing of AHD was easily realized with the SERS approach for the first time. After the derivatization with 2-nitrobenzaldehyde (2-NBA), Ag-BrNPs were also successfully utilized for AHD detection in sea cucumber with the LOD of 5 ng/g.

Semicarbazide Accumulation, Distribution and Chemical Forms in Scallop (Chlamys farreri) after Seawater Exposure

Simple Summary

Semicarbazide is considered the characteristic metabolite of nitrofurazone and it is often used as a marker to monitor the illegal use of nitrofurazone in foods. Recent studies have indicated that semicarbazide pollution can be introduced in many ways and this compound is a newly recognized pollutant type in the environment that accumulates in aquatic organisms throughout the food chain. Scallops are the third most consumed shellfish in China. We therefore studied the accumulation, chemical forms, and distribution of semicarbazide in scallop tissues. Semicarbazide added to tank seawater resulted in its accumulation in both free and tissue-bound forms and the levels varied according to tissue and were present in all tissues examined. The levels were highest in viscera and the lowest in muscle. The levels of semicarbazide in the environment and in cultured shellfish should be monitored to ensure food quality and safety and human health.

Abstract

Semicarbazide is a newly recognized marine pollutant and has the potential to threaten marine shellfish, the ecological equilibrium and human health. In this study, we examined the accumulation, distribution, and chemical forms of semicarbazide in scallop tissues after exposure to 10, 100, and 1000 μg/L for 30 d at 10 °C. We found a positive correlation between semicarbazide residues in the scallops and the exposure concentration (p < 0.01). Semicarbazide existed primarily in free form in all tissues while bound semicarbazide ranged from 12.1 to 32.7% and was tissue-dependent. The time for semicarbazide to reach steady-state enrichment was 25 days and the highest levels were found in the disgestive gland, followed by gills while levels in gonads and mantle were similar and were lowest in adductor muscle. The bioconcentration factor (BCF) of semicarbazide at low exposure concentrations was higher than that at high exposure concentrations. These results indicated that the scallop can uptake semicarbazide from seawater and this affects the quality and safety of these types of products when used as a food source.

Biosensing based on upconversion nanoparticles for food quality and safety applications

Food safety and quality regulations inevitably call for sensitive and accurate analytical methods to detect harmful contaminants in food and to ensure safe food for the consumer. Both novel and well-established biorecognition elements, together with different transduction schemes, enable the simple and rapid analysis of various food contaminants. Upconversion nanoparticles (UCNPs) are inorganic nanocrystals that convert near-infrared light into shorter wavelength emission. This unique photophysical feature, along with narrow emission bandwidths and large anti-Stokes shift, render UCNPs excellent optical labels for biosensing because they can be detected without optical background interferences from the sample matrix. In this review, we show how this exciting technique has evolved into biosensing platforms for food quality and safety monitoring and highlight recent applications in the field.

Collaborative compounding of metal-organic frameworks for dispersive solid-phase extraction HPLC-MS/MS determination of tetracyclines in honey

Metal-organic frameworks (MOFs), a sort of dispersive solid-phase extraction (d-SPE) material, has shown considerable prospects in the pretreatment of food, biological and other complex samples. Herein, we developed a method for compounding MOFs for d-SPE and trace determination of tetracyclines (TCs) in honey. When the compounding ratio of MIL-101 (Cr), MIL-100 (Fe) and MIL-53 (Al) was 7:1:2, adsorption-extraction was effective. Followed by high-performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS), the limits of detection were 0.073-0.435 ng/g and the limits of quantitation ranged from 0.239 to 1.449 ng/g for oxytetracycline, tetracycline, chlortetracycline and doxycycline. The method was applied to four kinds of honey samples with recoveries from 88.1% to 126.2%. The compounding of MOFs provides a strategy for purification and multi-target extraction from complex food matrices by d-SPE.

A simplified modification to rapidly determine the residues of nitrofurans and their metabolites in aquatic animals by HPLC triple quadrupole mass spectrometry

A simplified method is described for reducing the analysis time of nitrofurans (NFs) and nitrofuran metabolites (NFMs) in the aquatic animals. Most existing HPLC-MS/MS methods are intended only for NFMs and are based on their fast metabolic transformations. We optimized a method for simultaneously detecting major NFs and their metabolites, including nitrovin (NV) that imply use of an optimized buffer solution. The novel method was validated by six different aquatic animal matrices (loach, catfish, shrimp, lobster, scallop, and eel) spiked with the analytes at 0.5, 1.0, and 2.0 μg kg^-1. Recovery rates and %RSDs (relative standard deviations) of 82-97% and 1-8% were observed for NFMs, respectively, with values of 70-96% and 1-8% obtained for furazolidone, furaltadone, nitrofurazone, nitrofurantoin, and NV, respectively. Linearity was observed in the 0.1-20 μg L^-1 range, with correlation coefficients greater than 0.99 recorded for all compounds. The developed method is sensitive, accurate, easier to use, and faster than previous methods when applied to real samples. To the best of our knowledge, this is the first method that can simultaneously determine NFs and their metabolites, as well as NV, using a single-step extraction process.

Confirmation of five nitrofuran metabolites including nifursol metabolite in meat and aquaculture products by liquid chromatography-tandem mass spectrometry: Validation according to European Union Decision 2002/657/EC

LC-MS/MS method for confirmation of nitrofuran metabolites in meat and aquaculture products, including the nifursol metabolite (DNSH), was developed. The nitrofuran metabolites investigated were as follows: 3-amino-2-oxazolidinone (AOZ), 3-amino-5-morpholinomethyl-2-oxazolidinone (AMOZ), 1-aminohydantoine (AHD), semicarbazide (SEM) and 3,5-dinitrosalicylic acid hydrazide (DNSH). The sample preparation includes a washing step, allowing to analyze only the fraction of protein-bound residues. The final optimized recovery solvent for injection was found to be a mixture of ammonium acetate 2 mM/acetonitrile (60/40 ; v/v). Matrix effects and stability in biological matrix and standard solution for DNSH have been also carried out. Method performances were assessed using criteria of the Decision (EC) No 2002/657 and considering the proposed-for-adoption reference point for action (RPA) of 0.50 µg.kg^-1 under Reg 1871/2019. Trueness ranged 86.5%-103.7% and precision ranged 2.0%-6.5% on intra-laboratory reproducibility conditions. Decision limit (CCα) ranged 0.028-0.182 μg.kg^-1 and capability of detection limit (CCβ) ranged 0.032-0.233 µg.kg^-1.

An Easy Efficient Method of Veterinary Drug Residue Analysis in Raw Milk by RP-HPLC-UV with Application to Raw Milk

Background:

This study reports an easy method of a veterinary drug investigation in raw milk, based on QuECHERS extraction followed by RP-HPLC-UV analysis. Use of this benchtop system was motivated by its availability and moderate cost relatively to other sophisticated methods such as LC-MS which are more efficient.

Methods:

This developed method has been optimized and then after validation according to EU legislation, it demonstrated good linearity with R²>0.997, acceptable peak resolution within a short time (<9.5 min) and good recovery of the analyzed drugs (OXY, ALZ and IVR, respectively 87.08, 99.02 and 92.01 %). Additionally, we applied the method to the analysis of cow milk, collected in Nouakchott, capital of Mauritania.

Results:

The obtained results indicated a mixed level of drug use according to targeted molecules. In 42% of sampled farms, the anti-parasitics IVR and ALZ were detected whereas the antibiotic OXY was detected in 50%.

Conclusion:

This investigation shows that 17% of the sampled farms exceeded European standards for IVR drug.

Antibiotic residues in milk: Past, present, and future

Now-a-days, various types of antibiotics are being used worldwide in veterinary sector indiscriminately for promotion of growth and treatment of the livestock. Significant portions of antibiotics are released through milk of dairy animals unaltered and exert serious harmful effects on human health. This review evaluates and compare researches on antibiotic residues in milk in published literatures from Pubmed, CrossRef, CAB direct, DOAJ, JournalTOCs, AGRICOLA, ScientificGate, Electronic Journals Library, CAB abstracts, Global Health Databases, Global Impact Factor, Google Scholar, Park Directory of Open Access Journals, BanglaJOL and ISC E-Journals. Antibiotics residue in milk was first detected in 60s and then with an increasing trend with highest after 2,000 (188). The highest no. of works, 49 (21.87%) were accomplished in China, followed by Spain, 30 (13.39%); Germany, 11 (4.91%); and USA, 10 (4.46%). Continent-wise highest researches are published from Europe, 105 (46.88%), followed by Asia, 77 (34.38%); South America, 18 (8.04%); North America, 16 (7.14%); and Africa, 8 (3.57%). For detection, Bovine milk sample is mostly used, 193 (86.16%), followed by ovine, 19 (8.48%); and caprine, 14 (6.25%). Acetonitrile was used in maximum cases (77) for processing the samples. Chromatographic technique was the highest, 115 (51.34%) for detection. Residue of β-lactam group have been detected mostly 133 (36.54%), followed by tetracyclines, 51 (14.01%); fluoroquinolones, 49 (13.46%); sulfonamides, 46 (12.64%); and aminoglycosides, 38 (10.44%). This review observe that antibiotics residues are more common in milk samples that are being manifested in increasing researches on antibiotic detection and measures should adopt to cease this residue.

A simple and high-throughput method for multiresidue and multiclass quantitation of antimicrobials in pangasius (Pangasionodon hypophthalmus) fillet by liquid chromatography coupled with tandem mass spectrometry

The development and validation of a throughput method for the determination of 25 antibacterial drugs (two β-lactams, eight quinolones, two macrolides, five sulfonamides, trimethoprim, four tetracyclines and three amphenicols) in pangasius fish muscle by LC-MS/MS were performed. A simple, efficient and fast extraction procedure was developed using acetonitrile and a 0.1 M EDTA solution as solvents for extraction. All compounds were determined in a single run, and chromatographic separation was achieved using a Zorbax SB C18 column with a mobile phase comprised of purified water +0.1% formic acid (A) and acetonitrile +0.1% formic acid (B) in a linear gradient program. The method was validated aαording to the requirements of European Decision 2002/657/EC. To quantify the analytes, matrix-matched analytical curves were constructed with spiked blank tissues and showed linearity (r²) higher than 0.99. For all analytes, the precision and accuracy were determined at the levels of 3 ng/g (low), 10 ng/g (low-middle), 50 ng/g (high-middle) and 100 ng/g (high). The precision (CV%) was lower than 18.6% and the accuracy (determined as recovery) was between 65% and 119%. The limit of quantitation was 3.0 ng/g, with the exception of chloramphenicol, which was 0.3 ng/g, and amoxicillin and doxycycline, which were 10 ng/g. The method was successfully applied to analyze pangasius muscle samples from Vietnam available at the Brazilian retail market, and 5 out of 40 samples showed the presence of low-residue levels of enrofloxacin and, consequently, must be considered out of conformity. It is recommended that competent authorities should avoid the commercialization of pangasius fillet contaminated with residues of this veterinary drug.

Determination of nitrofuran metabolites in marine products by high performance liquid chromatography–fluorescence detection with microwave-assisted derivatization

A sensitive method for simultaneous detection of four nitrofuran metabolites (3-amino-2-oxazolidinone (AOZ), semicarbazide (SEM), 3-amino-morpholinomethyl-2-oxazolidinone (AMOZ) and 1-aminohydantoin (AH)) in marine products.

Molecularly Imprinted Polymers as Extracting Media for the Chromatographic Determination of Antibiotics in Milk

Milk-producing animals are typically kept stationary in overcrowded large-scale farms and in most cases under unsanitary conditions, which promotes the development of infections. In order to maintain sufficient health status among the herd or promote growth and increase production, farmers administer preventative antibiotic doses to the animals through their feed. However, many antibiotics used in cattle farms are intended for the treatment of bacterial infections in humans. This results in the development of antibiotic-resistant bacteria which pose a great risk for public health. Additionally, antibiotic residues are found in milk and dairy products, with potential toxic effects for the consumers. Hence the need of antibiotic residues monitoring in milk arises. Analytical methods were developed for the determination of antibiotics in milk, with key priority given to the analyte extraction and preconcentration step. Extraction can benefit from the production of molecularly imprinted polymers (MIPs) that can be applied as sorbents for the extraction of specific antibiotics. This review focuses on the principals of molecular imprinting technology and synthesis methods of MIPs, as well as the application of MIPs and MIPs composites for the chromatographic determination of various antibiotic categories in milk found in the recent literature.

Evaluation of Antibiotic Residues in Raw Meat Using Different Analytical Methods

Antibiotic residue in meat is a serious public health concern due to its harmful effects on consumer health. This study aimed at estimating the residue levels of four commonly used antibiotics in meat samples using three analytical methods (ELISA, TLC and HPLC). A total of 150 samples of raw meat from sales points were analysed for ciprofloxacin, streptomycin, tetracycline, and sulphanilamide residues. Overall, ELISA analysis showed that 56, 34, 18, and 25.3% of the samples tested positive for ciprofloxacin, streptomycin, sulphanilamide and tetracycline residues respectively while TLC and HPLC detected 21.4, 29.4, 92.5, and 14.6%, and 8.3, 41.1, 88.8, and 14.6% of the samples as containing the residues, with ciprofloxacin and sulphanilamide having the lowest and highest occurrence, respectively. Furthermore, the concentrations of antibiotic residues were in the ranges of 19.8-92.8, 26.6-489.1, 14.2-1280.8, and 42.6-355.6 μg/kg with ELISA, while HPLC detected concentration ranges of 20.7-82.1, 41.8-320.8, 65.2-952.2 and 32.8-95.6 μg/kg for sulphanilamide, tetracycline, streptomycin, and ciprofloxacin, respectively. Mean ciprofloxacin and streptomycin residue levels were above the Codex/SA MRL recommended limit, while 3% of the samples contained multidrug residues. Although some of the mean residues levels were below the permissible limits, the co-occurrence of multidrug residues in some of the samples calls for concern.

Validation of an UHPLC-MS/MS Method for Screening of Antimicrobial Residues in Eggs and Their Application to Analyses of Eggs from Laying Hens Subjected to Pharmacological Treatment

A multiresidue method by UHPLC/MS-MS was optimized and validated for the screening and semiquantitative detection of antimicrobials residues from tetracyclines, aminoglycosides, quinolones, lincosamides, β-lactams, sulfonamides, and macrolides families in eggs. A qualitative approach was used to ensure adequate sensitivity to detect residues at the level of interest, defined as maximum residue limit (MRL), or less. The applicability of the methods was assessed by analyzing egg samples from hens that had been subjected to pharmacological treatment with neomycin, enrofloxacin, lincomycin, oxytetracycline, and doxycycline during five days and after discontinuation of medication (10 days). The method was adequate for screening all studied analytes in eggs, since the performance parameters ensured a false-compliant rate below or equal to 5%, except for flumequine. In the analyses of eggs from laying hens subjected to pharmacological treatment, all antimicrobial residues were detected throughout the experimental period, even after discontinuation of medication, except for neomycin, demonstrating the applicability of the method for analyses of antimicrobial residues in eggs.

Synthesis and retention properties of molecularly imprinted polymers for antibiotics containing a 5-nitrofuran ring

Impedimetric sensor based on molecularly imprinted polymers synthetized for antibiotics containing a 5-nitrofuran ring.

Evaluation of the Presence and Levels of Enrofloxacin, Ciprofloxacin, Sulfaquinoxaline and Oxytetracycline in Broiler Chickens after Drug Administration

The depletion times of enrofloxacin and its metabolite ciprofloxacin as well as sulfaquinoxaline and oxytetracycline were evaluated in broiler chickens that had been subjected to pharmacological treatment. The presence and residue levels of these drugs in muscle tissue were evaluated using an ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) method that was validated in this work. The results showed the presence of all antimicrobial residues; however, the presence of residues at concentrations higher than the drugs’ maximum residue limit (MRL) of 100 μg kg^-1 was found only during the treatment period for oxytetracycline and until two days after discontinuation of the medication for enrofloxacin, ciprofloxacin and sulfaquinoxaline. It was concluded that the residues of all antimicrobials were rapidly metabolized from the broiler muscles; after four days of withdrawal, the levels were lower than the limit of quantification (LOQ) of the method for the studied analytes.

Occurrence and levels of nitrofuran metabolites in sea cucumber from Dalian, China

The occurrence and levels of nitrofuran metabolites (NFMs) in sea cucumber (SC) from Dalian, China, are reported. Four metabolites including 3-amino-5-morpholinomethyl-2-oxazolidinone (AMOZ), 3-amino-2-oxazolidinone (AOZ), semicarbazide (SEM) and 1-aminohydantoin (AHD) in different SC products (fresh, instant and dry salted SCs) were measured. The frequency of occurrence for NFMs in all SC samples was 42.7%. The total NFM concentrations ranged from non-detectable to 64.6 ng g^-1, with a mean of 3.59 ng g^-1. AOZ and SEM were the dominant congeners, accounting for 40.1% and 59.1% of the total NFMs, respectively. The concentrations and patterns varied among different regions. Higher levels of NFMs were found in the fresh SC products, and the order for the average concentration of ∑₄NFM was fresh > dry salted > instant.

Optimization and validation method to evaluate the residues of β-lactams and tetracyclines in kidney tissue by UPLC-MS/MS

Methods are validated by a process that defines the analytical requirements and confirms that the investigated method is capable of performing consistently. A quantitative and confirmatory method for determining the presence of β-lactam and tetracycline multiresidues in avian, bovine, equine, and swine kidney tissues using ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) was developed, optimized, and validated. Analytes were extracted from the kidneys by a mixture of water and acetonitrile, and the extract was then purified with hexane and C18 (dispersive phase). The method was evaluated by the following parameters: linearity, matrix effect, specificity, decision limits (CCα), detection capability (CCβ), accuracy, precision, trueness, limits of detection (LOD), limits of quantification (LOQ), and robustness. The validated method presented a broad linear study range and significant matrix effect. The limit of detection (LOD) was defined from 2.5 to 25.0 µg kg(-1), and the limit of quantification (LOQ) was defined from 5.0 to 50.0 µg kg(-1) for individual analytes. The resultant recovery values ranged from 98.1% to 107.3% in repeatability conditions and from 95.2% to 106% under intralaboratory reproducibility conditions for the studied analytes. It was concluded that the performance parameters demonstrated total method adequacy for detecting and quantifying β-lactam and tetracycline residues in swine, equine, bovine, and avian kidneys.

Determination of nitrofurans metabolites residues in aquatic products by ultra-performance liquid chromatography-tandem mass spectrometry

A method was described for monitoring four nitrofuran metabolites including 5-methylmorpholino-3-amino-2-oxazolidinone (AMOZ), 3-amino-2-oxazolidone (AOZ), 1-amino-hydantoin (AHD) and semicarbazide (SEM) in aquatic products. The analytes were quantified by ultra-performance liquid chromatography-tandem mass spectrometry operating in positive ion multiple monitoring mode (MRM) after 2-nitrobenzaldehyde derivatization. The matrix calibration curve was established with correlation coefficient (R(2)>0.99) in the range of 1-100 ng ml(-1). Limit of detection and limit of quantification for all analytes were 0.5 and 1.5 μg kg(-1), respectively. Recovery rates and relative standard deviations ranged from 88% to 112% and 2% to 4%, respectively. The validated method was successfully applied to detect nitrofuran metabolites in 120 fish samples. The analytes were detected in 6/16 species of fish samples, with a total detection rate of 6.5%. AOZ was most frequently detected (8.3%), followed by AMOZ (7.5%), AHD (5.0%) and SEM (5.0%). The method is proposed for monitoring nitrofuran metabolites in aquatic products.

Multi-residue determination of 115 veterinary drugs and pharmaceutical residues in milk powder, butter, fish tissue and eggs using liquid chromatography-tandem mass spectrometry

A simple and sensitive multi-residue method for the determination of 115 veterinary drugs and pharmaceuticals, belonging in more than 20 different classes, in butter, milk powder, egg and fish tissue has been developed. The method involves a simple generic solid-liquid extraction step (solvent extraction, SE) with 0.1% formic acid in aqueous solution of EDTA 0.1% (w/v)-acetonitrile (ACN)-methanol (MeOH) (1:1:1, v/v) with additional ultrasonic-assisted extraction. Precipitation of lipids and proteins was promoted by subjecting the extracts at very low temperature (-23°C) for 12h. Further cleanup with hexane ensures fat removal from the matrix. Analysis was performed by liquid chromatography coupled with electrospray ionization and tandem mass spectrometry (LC-ESI-MS/MS). Two separate runs were performed for positive and negative ionization in multiple reaction monitoring mode (MRM). Particular attention was devoted to extraction optimization: different sample-to-extracting volume ratios, different concentrations of formic acid in the extraction solvent and different ultrasonic extraction temperatures were tested in butter, egg and milk powder samples. The method was also applied in fish tissue samples. It was validated, on the basis of international guidelines, for all four matrices. Quantitative analysis was performed by means of standard addition calibration. For over 80% of the analytes, the recoveries were between 50% and 120% in all matrices studied, with RSD values in the range of 1-18%. Limits of detection (LODs) and quantification (LOQs) ranged from 0.008 μg kg(-1) (oxfendazole in butter) to 3.15 μg kg(-1) (hydrochlorthiazide in egg). The evaluated method provides reliable screening, quantification, and identification of 115 veterinary drug and pharmaceutical residues in foods of animal origin and has been successfully applied in real samples.

Molecular imprinting science and technology: a survey of the literature for the years 2004-2011

Herein, we present a survey of the literature covering the development of molecular imprinting science and technology over the years 2004-2011. In total, 3779 references to the original papers, reviews, edited volumes and monographs from this period are included, along with recently identified uncited materials from prior to 2004, which were omitted in the first instalment of this series covering the years 1930-2003. In the presentation of the assembled references, a section presenting reviews and monographs covering the area is followed by sections describing fundamental aspects of molecular imprinting including the development of novel polymer formats. Thereafter, literature describing efforts to apply these polymeric materials to a range of application areas is presented. Current trends and areas of rapid development are discussed.