Size-exclusion chromatography (SEC) of branched polymers and polysaccharides

Recent progress in Porphyra haitanensis polysaccharides: Extraction, purification, structural insights, and their impact on gastrointestinal health and oxidative stress management

Porphyra haitanensis, a red seaweed species, represents a bountiful and sustainable marine resource. P. haitanensis polysaccharide (PHP), has garnered considerable attention for its numerous health benefits. However, the comprehensive utilization of PHP on an industrial scale has been limited by the lack of comprehensive information. In this review, we endeavor to discuss and summarize recent advancements in PHP extraction, purification, and characterization. We emphasize the multifaceted mechanisms through which PHP promotes gastrointestinal health. Furthermore, we present a summary of compelling evidence supporting PHP's protective role against oxidative stress. This includes its demonstrated potent antioxidant properties, its ability to neutralize free radicals, and its capacity to enhance the activity of antioxidant enzymes. The information presented here also lays the theoretical groundwork for future research into the structural and functional aspects of PHP, as well as its potential applications in functional foods.

Qualitative Monitoring of Proto-Peptide Condensation by Differential FTIR Spectroscopy

Condensation processes such as wet-dry cycling are thought to have played significant roles in the emergence of proto-peptides. Here, we describe a simple and low-cost method, differential Fourier transform infrared (FTIR) spectroscopy, for qualitative analysis of peptide condensation products in model primordial reactions. We optimize differential FTIR for depsipeptides and apply this method to investigate their polymerization in the presence of extraterrestrial dust simulants.

Fucoidan from the cell wall of Silvetia siliquosa with immunomodulatory effect on RAW 264.7 cells

Silvetia siliquosa, the only species of the family Fucaceae in China, is used as a medicine food homology. Fucoidan from S. siliquosa was extracted by hot water twice thoroughly (13 % of total yield), and a purified fucoidan SSF with a molecular weight of 93 kD was obtained. Chemical composition analysis demonstrated that SSF was primarily composed of sulfate (21.68 wt%) and fucose (84 % of all neutral monosaccharides). IR, methylation analysis, NMR and ESI-MS results indicated SSF had the backbone of mainly (1 → 3)-α-L-fucopyranose and minor (1 → 4)-α-L-fucopyranose, with little 1,3 and 1,4 branched β-D-Xylp and β-D-Galp. The in vitro immunomodulatory test on RAW 264.7 cells showed that SSF could up-regulate the expression of immune related factors and proteins in a concentration-dependent manner, but the immunomodulatory effect disappeared from desulfated SSF. This research indicated that highly sulfated fucan possessed immunomodulatory effect and the importance of sulfate groups in the activity of SSF.

Interfacial Adsorption of Oil-Soluble Kraft Lignin and Stabilization of Water-in-Oil Emulsions

In this paper, the potential of esterified Kraft lignin as a novel oil-soluble surfactant was examined. The lignin was chemically modified by esterification with lauric or stearic acid, making it soluble in solvents such as toluene or n-decane. Adsorption at the oil-water interface was then studied by the Du Noüy ring-method. The oil-soluble lignin behaved similar to water-soluble lignin surfactants, both the qualitative and quantitative progression of interfacial tension. Modeling revealed a surface excess of 7.5-9.0 × 10-7 mol/m2, area per molecule of 185-222 Å2, and a diffusion coefficient within the range 10-10 to 10-14 m2/s; all of which are in line with existing literature on water-soluble lignosulfonates. The data further suggested that the pendant alkyl chains were extended well into the paraffinic solvent. At last, bottle tests showed that the oil-soluble lignin was able to stabilize oil-in-water emulsions. The emulsion stability was affected by the concentration of lignin or NaCl as well as the oil phase composition. Aromatic oils exhibited lower emulsion stability in comparison to the aliphatic oil. In conclusion, a new type of surfactant was synthesized and studied, which may contribute to developing green surfactants and novel approaches to valorize technical lignin.

New sustainable polymers and oligomers for Cultural Heritage conservation

The development of "green" chemistry materials with enhanced properties is a central topic in numerous applicative fields, including the design of polymeric systems for the conservation of works of art. Traditional approaches in art restoration comprise polymer thickeners and viscous dispersions to partially control solvents in the removal of soil or aged varnishes/coatings from artifacts. Alternatively, polymeric gel networks can be specifically designed to grant full control of the cleaning action, yielding safe, time- and cost-effective restorations. The selection of polymers and oligomers in gel design is crucial to tune solvent upload, retention, and controlled release over the sensitive artistic surfaces. Starting from an overview of traditional polymer formulations and state-of-the-art gel systems for cleaning works of art, we provide here the design of a new class of gels, focusing on the selection of oligomers to achieve gels with tailored hydrophilicity/hydrophobicity. We evaluated the oligomers Hydrophilic-Lipophilic Balance (HLB) by developing, for the first time, a novel methodology combining SEC and DOSY NMR analysis, which was tested on a library of "green" oligoesters synthesized by polycondensation and poorly explored in the literature. Oligomers with moderate polydispersity were chosen to validate the new protocol as a robust tool for designing polymeric gels even on industrial scale. The methodology is more time-effective than traditional methods, and gives additional insights on the oligomers physico-chemical nature, evaluating their compatibility with different solvents. Then, we used the selected oligoesters with castor oil to obtain a new class of organogels able to upload solvents with varying polarity, which effectively removed different types of unwanted layers typically found in painting restoration. These results validate the oligomers screening approach and the new class of gels as promising chemical processes/materials in art preservation. The methodology can potentially allow evaluation of HLB also for small molecules (e.g., surfactants), opening for the formulation of polymers solutions/gels beyond Cultural Heritage conservation, as in pharmaceutics, cosmetics, food industry, tissue engineering, agriculture, and others.

Polymer Characterization by Size-Exclusion Chromatography with Multi-Angle Light Scattering (SEC-MALS): A Tutorial Review

This tutorial review presents the theory and application of SEC-MALS with minimal equations and a focus on synthetic polymer characterization, serving as an entry point for polymer scientists who want to learn more about SEC-MALS. We discuss the principles of static light scattering, outline its capability to generate absolute weight-average molar mass values, and extend its application to SEC-MALS. Practical elements are emphasized, enabling researchers to appreciate how values forM n , M w , and Đ are determined in an SEC-MALS experiment and how experimental conditions and input values, such as the specific refractive index increment ( d n / d c ), influence the results. Several illustrative SEC-MALS experiments demonstrate the impact of separation quality onM n (as opposed toM w ), the appearance of contaminants in SEC chromatograms from sample preparation, the influence of concentration on data quality, and how polymer topology affects molecular weight characterization in SEC. Finally, we address practical considerations, common issues, and persistent misconceptions.

Amylase-assisted extraction alters nutritional and physicochemical properties of polysaccharides and saponins isolated from Ganoderma spp

This study aimed to evaluate the efficacy of amylase in hydrolyzing complex carbohydrates of different parts of Ganoderma spp. The aqueous extracts of the Ganoderma samples were analyzed for their selected nutritional composition and physicochemical properties. The purified extracts were also structurally characterized. The aqueous canopy extracts of red-purple Ganoderma had a notably higher total sugar and saponin content than their stalks, but not for the black-type Ganoderma. The enzymatic extraction effectively improved the extraction yields, whereas the amounts of sugars and saponins in some extracts were increased after the enzymatic treatment. The results also showed that only those enzyme-treated cultivated black Ganoderma canopy had increased total sugar and total saponin content. The antioxidant activities of all stalk extracts were higher than the canopy extracts. Their emulsifying properties were comparable with lecithin due to their high saponin content. Therefore, these extracts are new natural emulsifiers.

Tailoring the Morphology of Monodisperse Mesoporous Silica Particles Using Different Alkoxysilanes as Silica Precursors

The hard template method for the preparation of monodisperse mesoporous silica microspheres (MPSMs) has been established in recent years. In this process, in situ-generated silica nanoparticles (SNPs) enter the porous organic template and control the size and pore parameters of the final MPSMs. Here, the sizes of the deposited SNPs are determined by the hydrolysis and condensation rates of different alkoxysilanes in a base catalyzed sol-gel process. Thus, tetramethyl orthosilicate (TMOS), tetraethyl orthosilicate (TEOS), tetrapropyl orthosilicate (TPOS) and tetrabutyl orthosilicate (TBOS) were sol-gel processed in the presence of amino-functionalized poly (glycidyl methacrylate-co-ethylene glycol dimethacrylate) (p(GMA-co-EDMA)) templates. The size of the final MPSMs covers a broad range of 0.5-7.3 µm and a median pore size distribution from 4.0 to 24.9 nm. Moreover, the specific surface area can be adjusted between 271 and 637 m² g^-1. Also, the properties and morphology of the MPSMs differ according to the SNPs. Furthermore, the combination of different alkoxysilanes allows the individual design of the morphology and pore parameters of the silica particles. Selected MPSMs were packed into columns and successfully applied as stationary phases in high-performance liquid chromatography (HPLC) in the separation of various water-soluble vitamins.

Gas-phase structure of polymer ions: Tying together theoretical approaches and ion mobility spectrometry

An increasing number of studies take advantage of ion mobility spectrometry (IMS) coupled to mass spectrometry (IMS-MS) to investigate the spatial structure of gaseous ions. Synthetic polymers occupy a unique place in the field of IMS-MS. Indeed, due to their intrinsic dispersity, they offer a broad range of homologous ions with different lengths. To help rationalize experimental data, various theoretical approaches have been described. First, the study of trend lines is proposed to derive physicochemical and structural parameters. However, the evaluation of data fitting reflects the overall behavior of the ions without reflecting specific information on their conformation. Atomistic simulations constitute another approach that provide accurate information about the ion shape. The overall scope of this review is dedicated to the synergy between IMS-MS and theoretical approaches, including computational chemistry, demonstrating the essential role they play to fully understand/interpret IMS-MS data.

Two-dimensional separation of water-soluble polymers using size exclusion and reversed phase chromatography employing capillary-channeled polymer fiber columns

Polymeric materials are readily available, durable materials that have piqued the interest of many diverse fields, ranging from biomedical engineering to construction. The physiochemical properties of a polymer dictate the behavior and function, where large polydispersity among polymer properties can lead to problems; however, current polymer analysis methods often only report results for one particular property. Two-dimensional liquid chromatography (2DLC) applications have become increasingly popular due to the ability to implement two chromatographic modalities in one platform, meaning the ability to simultaneously address multiple physiochemical aspects of a polymer sample, such as functional group content and molar mass. The work presented employs size exclusion chromatography (SEC) and reversed-phase (RP) chromatography, through two coupling strategies: SEC x RP and RP x RP separations of the water-soluble polymers poly(methacrylic acid) (PMA) and polystyrene sulfonic acid (PSSA). Capillary-channeled polymer (C-CP) fiber (polyester and polypropylene) stationary phases were used for the RP separations. Particularly attractive is the fact that they are easily implemented as the second dimension in 2DLC workflows due to their low backpressure (<1000 psi at ∼70 mm sec^-1) and fast separation times. In-line multi-angle light scattering (MALS) was also implemented for molecular weight determinations of the polymer samples, with the molecular weight of PMA ranging from 5 × 10⁴ to 2 × 10⁵ g mol^-1, while PSSA ranges from 10⁵ to 10⁸ g mol^-1. While the orthogonal pairing of SEC x RP addresses polymer sizing and chemistry, this approach is limited by long separation times (80 min), the need for high solute concentrations (PMA = 1.79 mg mL^-1 and PSSA = 0.175 mg mL^-1 to yield comparable absorbance responses) due to on-column dilution and subsequently limited resolution in the RP separation space. With RP x RP couplings, separation times were significantly reduced (40 min), with lower sample concentrations (0.595 mg mL^-1 of PMA and 0.05 mg mL^-1 of PSSA) required. The combined RP strategy provided better overall distinction in the chemical distribution of the polymers, yielding 7 distict species versus 3 for the SEC x RP coupling.

Maturation of demineralized arabinogalactan-proteins from Acacia seyal gum in dry state: Aggregation kinetics and structural properties of aggregates

The aggregation in dry state of mineral-loaded arabinogalactan-proteins (AGPs) from Acacia seyal gum (GA) generally occurs above 70 °C. This study focuses on the aggregation sensitivity of AGPs after their demineralization. The dry incubation in mild temperature (25 °C to 70 °C) of demineralized AGPs induced the formation of aggregates, not observed with GA. AGPs aggregated following a self-assembly mechanism for which temperature only modulated the aggregation rate. The activation energy was around 90-100 kJ·mol^-1 that could correspond to chemical condensation reactions induced by the AGPs surface dehydration. The aggregation kinetics were characterized by the formation of soluble aggregates during the first times of incubation, whose molar mass increased from 1 · 10⁶ g·mol^-1 to 6.7 · 10⁶ g·mol^-1 (SEC MALS) or 12 · 10⁶ g·mol^-1 (AF4 MALS) after 1.66 days of dry heating at 40 °C. These soluble aggregates revealed they adopted a similar conformation to that of not aggregated AGPs with a ν_h value around 0.45. Above 1.66 days at 40 °C, the soluble aggregates grew up to form microparticles with sizes ranging from 10 to around 200 μm. This study highlighted the protective role of cations from AGPs whose demineralization increased their sensibility to dry heating and their chemical reactivity for aggregation.

Emulsifiers from White Beans: Extraction and Characterization

This paper studies the emulsification capacity of aqueous extracts from white beans and reports the relations between the composition and structure of the extracts’ macromolecular components and their exerted emulsification ability. The extracts comprise of three distinct populations: one of large (few MDa) polysaccharides, proteins (tens of kDa), and smaller molecular entities (oligopeptides and oligosaccharides, polyphenols, and salts, among other molecules); the proteins and the smaller molecules adsorb onto oil–water interfaces, providing some emulsification capacity at pH 3 and adequate emulsification at pH 7. Unabsorbed polysaccharides, such as starch, cause depletion flocculation. Pickering phenomena are involved in the stabilization mechanism. The findings are supported by SEC–MALLS/UV, confocal microscopy, zeta potential measurements, and FT–IR data. A discussion is made on the particular attributes of each population in emulsion stability, on their relevance to culinary practice, and in their potential as replacers of artificial emulsifiers.

Complexation of soybean protein isolate with β-glucan and myricetin: Different affinity on 7S and 11S globulin by QCM-D and molecular simulation analysis

•

The ternary complex of SPI, β-glucan and myricetin was prepared, and the interaction mechanism was studied.

•

QCM-D was used to explore the binding affinity of 7S and 11S to β-glucan and myricetin.

•

Molecular docking analysis indicated that 11S protein has a stronger binding capacity compared with 7S.

The complexation of soybean protein isolate (SPI) with β-glucan (DG) and myricetin (MC) was focused in this study. UV-Vis, circular dichroism and 3D fluorescence analysis jointly proved that interaction with DG and MC altered the structures of SPI, whose β-sheet decreased to 29 % and random coil increased to 35 %, respectively. Moreover, the microenvironment of tryptophan and tyrosine from protein were changed. The ternary complex performed a different molecular weight distribution, showing a larger molecular weight of 1.17×10⁶ g/mol compared with SPI verified by gel permeation chromatography (GPC). And it was further evidenced by Quartz Crystal Microbalance with Dissipation (QCM-D) and molecular docking that glycinin (11S) possessed a better affinity toward DG and MC compared with β-conglycinin (7S), which indicated stronger binding ability through hydrogen bonds. The successful preparation of SPI-DG-MC complex will advance the application of soybean resource as a functional food ingredient.

Facile Synthesis of Functionalised Hyperbranched Polymers for Application as Novel, Low Viscosity Lubricant Formulation Components

A novel, previously unreported, method for synthesising hyperbranched (HB) materials is detailed. Their use as additives to produce lubricant formulations that exhibit enhanced levels of wear protection and improved low-temperature oil viscosity and flow is also reported. The lubricant formulations containing HB additives were found to exhibit both significantly lower viscosities and improved in-use film-forming properties than the current industry standard formulations. To achieve this, alkyl methacrylate oligomers (predominantly dimers and trimers) were synthesised using catalytic chain transfer polymerisation. These were then used as functional chain transfer agents (CTA) to control the polymerisation of divinyl benzene (DVB) monomers to generate highly soluble, high polydispersity HB polymers. The level of dimer/trimer purification applied was varied to define its influence on both these HB resultant structures and the resultant HB additives’ performance as a lubricant additive. It was shown that, while the DVB acted as the backbone of the HB, the base oil solubility of the additive was imparted by the presence of the alkyl chains included in the structure via the use of the oligomeric CTAs.

Analysis of molecular weight and structural changes in water-extractable arabinoxylans during the breadmaking process

Arabinoxylans are important for dough and breadmaking properties. It is not clear how arabinoxylans of different molecular weights behave during the breadmaking process as well as the changes in individual structures. We investigated changes in the molecular weight and structure of water-extractable arabinoxylans. It was revealed that molecules larger than high molecular weight arabinoxylans were formed during the mixing and 1st fermentation (105 min before 1st punch). High molecular weight arabinoxylan continued to be degraded from mixing to the proofing stage. The arabinose to xylose ratio increased at mixing and the 1st fermentation due to solubilization of highly substituted arabinoxylan. Low molecular weight arabinoxylan did not show degradation and structural changes during the fermentation process, whereas the weight average molecular weight of low molecular weight arabinoxylan significantly decreased (P < 0.05) at mixing. Water extractable arabinoxylan shows different behaviors for molecular weight and structural changes during the breadmaking process.

Exopolysaccharides from Marine Microbes: Source, Structure and Application

The unique living environment of marine microorganisms endows them with the potential to produce novel chemical compounds with various biological activities. Among them, the exopolysaccharides produced by marine microbes are an important factor for them to survive in these extreme environments. Up to now, exopolysaccharides from marine microbes, especially from extremophiles, have attracted more and more attention due to their structural complexity, biodegradability, biological activities, and biocompatibility. With the development of culture and separation methods, an increasing number of novel exopolysaccharides are being found and investigated. Here, the source, structure and biological activities of exopolysaccharides, as well as their potential applications in environmental restoration fields of the last decade are summarized, indicating the commercial potential of these versatile EPS in different areas, such as food, cosmetic, and biomedical industries, and also in environmental remediation.

Characterization and Antioxidant Activity of Mannans from Saccharomyces cerevisiae with Different Molecular Weight

Polysaccharides were extracted from natural sources with various biological activities, which are strongly influenced by their chemical structure and molecular weight. In this research, mannans polysaccharides were obtained from Saccharomyces cerevisiae by ethanol precipitation. The molecular weight of YM50, YM70, and YM90 mannans was 172.90 kDa, 87.09 kDa, and 54.05 kDa, respectively. Scanning electron microscopy of YM 90 mannans showed a rough surface with numerous cavities, while the surfaces of YM50 and YM70 were relatively smooth. Sepharose CL-6B and FTIR indicated that mannans had the characteristic bands of polysaccharides. The antioxidant activities of polysaccharides were evaluated in vitro using various assays. Mannans showed a good scavenging activity of DPPH radicals which depend on the molecular weight and concentration, and a higher scavenging activity of hydroxyl radical than ferric-reducing power activities. For the three types of mannans, cytotoxicity and hemolytic activity were rarely detected in mice erythrocytes and Caco-2 cells. Those results could contribute to the further application of mannans from Saccharomyces cerevisiae in the food and medicine industry.

Chromatographic separation of active polymer-like worm mixtures by contour length and activity

The convective transport rate of polymers through confined geometries depends on their size, allowing for size-based separation of polymer mixtures (chromatography). Here, we investigate whether mixtures of active polymers can be separated in a similar manner based on their activity. We use thin, living Tubifex tubifex worms as a model system for active polymers and study the transport of these worms by an imposed flow through a channel filled with a hexagonal pillar array. The transport rate through the channel depends strongly on the degree of activity, an effect that we assign to the different distribution of conformations sampled by the worms depending on their activity. Our results demonstrate a unique way to sort mixtures of active polymers based on their activity and provide a versatile and convenient experimental system to investigate the hydrodynamics of active polymers.

Differences and similarities between mono-, bi- or tetrafunctional initiated cationic ring-opening polymerization of 2-oxazolines

Cationic ring-opening polymerization (CROP) is an interesting synthesis technique to obtain well-defined polymers with narrow molar mass distribution (MMD).

A unified kinetic Monte Carlo approach to evaluate (a)symmetric block and gradient copolymers with linear and branched chains illustrated for poly(2-oxazoline)s

The synthesis of well-defined gradient, block-gradient and di-block copolymers with both asymmetric and symmetric compositions considering hydrophilic and hydrophobic monomer units is relevant for application fields, such as drug/gene delivery...

High molecular weight hyper-branched PCL-based thermogelling vitreous endotamponades

Vitreous endotamponades play essential roles in facilitating retina recovery following vitreoretinal surgery, yet existing clinically standards are suboptimal as they can cause elevated intra-ocular pressure, temporary loss of vision, and cataracts while also requiring prolonged face-down positioning and removal surgery. These drawbacks have spurred the development of next-generation vitreous endotamponades, of which supramolecular hydrogels capable of in-situ gelation have emerged as top contenders. Herein, we demonstrate thermogels formed from hyper-branched amphiphilic copolymers as effective transparent and biodegradable vitreous endotamponades for the first time. These hyper-branched copolymers are synthesised via polyaddition of polyethylene glycol, polypropylene glycol, poly(ε-caprolactone)-diol, and glycerol (branch inducing moiety) with hexamethylene diisocyanate. The hyper-branched thermogels are injected as sols and undergo spontaneous gelation when warmed to physiological temperatures in rabbit eyes. We found that polymers with an optimal degree of hyper-branching showed excellent biocompatibility and was able to maintain retinal function with minimal atrophy and inflammation, even at absolute molecular weights high enough to cause undesirable in-vivo effects for their linear counterparts. The hyper-branched thermogel is cleared naturally from the vitreous through surface hydrogel erosion and negates surgical removal. Our findings expand the scope of polymer architectures suitable for in-vivo intraocular therapeutic applications beyond linear constructs.

Evaluation of the Effects of Fucoidans from Fucus Species and Laminaria hyperborea against Oxidative Stress and Iron-Dependent Cell Death

Fucoidans are algal polysaccharides that exhibit protective properties against oxidative stress. The aim of this study was to investigate different fucoidans from brown seaweeds for their ability to protect against iron-dependent oxidative stress (ferroptosis), a main hallmark of retinal and brain diseases, including hemorrhage. We investigated five new high-molecular weight fucoidan extracts from Fucus vesiculosus, F. serratus, and F. distichus subsp. evanescens, a previously published Laminaria hyperborean extract, and commercially available extracts from F. vesiculosus and Undaria pinnatifida. We induced oxidative stress by glutathione depletion (erastin) and H2O2 in four retinal and neuronal cell lines as well as primary cortical neurons. Only extracts from F. serratus, F. distichus subsp. evanescens, and Laminaria hyperborea were partially protective against erastin-induced cell death in ARPE-19 and OMM-1 cells, while none of the extracts showed beneficial effects in neuronal cells. Protective fucoidans also attenuated the decrease in protein levels of the antioxidant enzyme GPX4, a key regulator of ferroptosis. This comprehensive analysis demonstrates that the antioxidant abilities of fucoidans may be cell type-specific, besides depending on the algal species and extraction method. Future studies are needed to further characterize the health-benefiting effects of fucoidans and to determine the exact mechanism underlying their antioxidative abilities.

Hulless barley and β-glucanase affect ileal digesta soluble beta-glucan molecular weight and digestive tract characteristics of coccidiosis-vaccinated broilers

Exogenous β-glucanase (BGase) in barley-based feed has been shown to reduce digesta viscosity in chickens, and thereby improve performance. Less well studied is the potential for BGase to convert barley β-glucan into low molecular weight carbohydrates, which might influence digestive tract function and enteric disease. Coccidiosis-vaccinated broiler chickens were fed graded levels of hulless barley (HB) and BGase to determine their effects on β-glucan depolymerization and digestive tract characteristics. Broilers were fed high β-glucan HB (0%, 30% and 60% replacing wheat) and BGase (0%, 0.01% and 0.1%) in a 3 × 3 factorial arrangement. A total of 5,346 broilers were raised in litter floor pens and vaccinated for coccidiosis on d 5. Each treatment was assigned to 1 pen in each of 9 rooms. The significance level was set at P ≤ 0.05. At both 11 and 33 d of broiler ages, peak molecular weight of β-glucan in ileal digesta decreased with increasing BGase for 30% and 60% HB. The maximum molecular weight for the smallest 10% β-glucan molecules (MW-10%) decreased with BGase at both ages for 30% and 60% HB; for birds fed 0% HB, only 0.1% BGase decreased MW-10%. The 0.1% BGase increased caecal short chain fatty acids (SCFA) compared to the 0.01% BGase at d 11 only for the 60% HB. Ileal pH increased with increasing HB and BGase at d 11 and 33. Caecal pH was lower for 0.1% BGase than 0% BGase for 60% HB at d 11. Relative mRNA expression of interleukin 6 (IL-6) and IL-8 in the ileum increased with 0.1% BGase at d 11 and 33, respectively, whereas expression of ileal mucin 2 (MUC2) decreased with 0.1% BGase at d 33. In the caeca, interactions between HB and BGase were significant for monocarboxylate transporter 1 (MCT1) and mucin 5AC (MUC5 AC) on d 11, but no treatment effects were found at d 33. In conclusion, BGase depolymerized high molecular weight β-glucan in HB in a dose-dependent manner. Hulless barley and BGase did not increase SCFA concentrations (except for 60% HB with 0.1% BGase at d 11) and caused minor effects on digestive tract histomorphological measurements and relative mRNA gene expression.

Quantification of branching within high molecular weight polymers with polyester backbones formed by transfer-dominated branching radical telomerisation (TBRT)

New branched polymerisations offer previously inaccessible macromolecules and architectural understanding is important as it provides insight into the branching mechanism and enables the determination of structure-property relationships. Here we present a detailed inverse gated 13C NMR characterisation of materials derived from the very recently reported Transfer-dominated Branching Radical Telomerisation (TBRT) approach to quantify branching and provide an insight into cyclisation.

Asymmetric-Flow Field-Flow Fractionation of complex waterborne polymer dispersions: Effect of the concentration of water in the measurement of molar mass distributions

Asymmetric-Flow Field-Flow Fractionation is a very powerful technique for measuring the molar mass distribution of polymers with complex microstructures. The analysis of some samples such as self-crosslinkable latexes requires to directly dissolve the polymer dispersion in the eluent (THF) without drying it, and this work studies the effect of the presence of this water in those analysis. Taking a polystyrene latex as model system, it was observed that the measured molar mass and radius of gyration increased as the concentration of water in the sample increased. This was an effect of a decrease in the compatibility between the solvent mixture (THF and water) and the polymer, which formed aggregates, and could be predicted calculating the polymer-solvent interaction parameter. When the study was extended to poly(methyl methacrylate), poly(n-butyl acrylate) and poly(vinyl acetate) the same general trend was observed, however, the impact of the water was less significant as the hydrophilicity of the polymer increased. Most importantly, if the samples with the highest water content were first dissolved in THF and afterwards dried using MgSO₄ the measured molar mass and radius of gyration values were the same as for the reference sample (dried in the oven), providing a method to analyze samples that cannot be dried into a film and remove the negative effect of the water at the same time.

Thermosensitive Vesicles from Chemically Encoded Lipid-Grafted Elastin-like Polypeptides

Biomimetic design to afford smart functional biomaterials with exquisite properties represents synthetic challenges and provides unique perspectives. In this context, elastin-like polypeptides (ELPs) recently became highly attractive building blocks in the development of lipoprotein-based membranes. In addition to the bioengineered post-translational modifications of genetically encoded recombinant ELPs developed so far, we report here a simple and versatile method to design biohybrid brush-like lipid-grafted-ELPs using chemical post-modification reactions. We have explored a combination of methionine alkylation and click chemistry to create a new class of hybrid lipoprotein mimics. Our design allowed the formation of biomimetic vesicles with controlled permeability, correlated to the temperature-responsiveness of ELPs.

Probing Polyester Branching by Hybrid Trapped Ion-Mobility Spectrometry-Tandem Mass Spectrometry

Trapped ion-mobility spectrometry combined with quadrupole time-of-flight mass spectrometry (TIMS-QTOFMS) was evaluated as a tool for resolving linear and branched isomeric polyester oligomers. Solutions of polyester samples were infused directly into the ion source employing electrospray ionization (ESI). TIMS-MS provides both mobility and m/z data on the formed ions, allowing construction of extracted-ion mobilograms (EIMs). EIMs of polyester molecules showed multimodal patterns, indicating conformational differences among isomers. Subsequent TIMS-MS/MS experiments indicated mobility differences to be caused by (degree of) branching. These assignments were supported by liquid chromatography-TIMS-MS/MS analysis, confirming that direct TIMS-MS provided fast (500 ms/scan) distinction between linear and branched small oligomers. Observing larger oligomers (up to 3000 Da) using TIMS required additional molecular charging to ensure ion entrapment within the mobility window. Molecular supercharging was achieved using m-nitrobenzyl alcohol (NBA). The additional charges on the oligomer structures enhanced mobility separation of isomeric species but also added to the complexity of the obtained fragmentation mass spectra. This complexity could be partly reduced by post-TIMS analyte-decharging applying collision-induced dissociation (CID) prior to Q1 with subsequent isolation of the singly charged ions for further fragmentation. The as-obtained EIM profiles were still quite complex as larger molecules possess more possible structural isomers. Nevertheless, distinguishing between linear and symmetrically branched oligomers was possible based on measured differences in collisional cross sections (CCSs). The established TIMS-QTOFMS approach reliably allows branching information on isomeric polyester molecules up to 3000 Da to be obtained in less than 1 min analysis time.

Complexation of maltodextrin-based inulin and green tea polyphenols via different ultrasonic pretreatment

Ultrasound has been applied in food processing for various purpose, showing potential to advance the physical and chemical modification of natural compounds. In order to explore the effect of ultrasonic pretreatment on the complexation of inulin and tea polyphenols (TPP), different frequencies (25, 40, 80 kHz) and output power (40, 80, 120 W) were carried out. According to the comparison in particle size distribution and phenolic content of different inulin-TPP complexes, it was indicated that high-intensity ultrasonic (HIU) treatment (25 kHz, 40 W, 10 min) could accelerate the interaction of polysaccharides and polyphenols. Moreover, a series of spectral analysis including UV-Vis, FT-IR and NMR jointly evidenced the formation of hydrogen bond between saccharides and phenols. However, the primary structure of inulin and the polysaccharide skeleton were not altered by the combination. Referring to field emission scanning electron microscopy (FESEM), the morphology of ultrasound treated-complex presented a slight agglomeration in the form of bent sheets, compared to non-treated sample. The inulin-TPP complex also revealed better stability based on thermogravimetric analysis (TGA). Thus, it can be speculated from the identifications that proper ultrasonic treatment is promising to promote the complexation of some food components during processing.

Potential Valorization of Hazelnut Shells through Extraction, Purification and Structural Characterization of Prebiotic Compounds: A Critical Review

Hazelnuts are one of the most widely consumed nuts, but their production creates large quantities of by-products, especially shells, that could be upcycled into much more valuable products. Recent studies have shown that hazelnut shell hemicellulose is particularly rich in compounds that are potential precursors of xylooligosaccharides and arabino-xylooligosaccharides ((A)XOS), previously defined as emerging prebiotics very beneficial for human health. The production of these compounds on an industrial scale-up could have big consequences on the functional foods market. However, to produce (A)XOS from a lignocellulosic biomass, such as hazelnut shell, is not easy. Many methods for the extraction and the purification of these prebiotics have been developed, but they all have different efficiencies and consequences, including on the chemical structure of the obtained (A)XOS. The latter, in turn, is strongly correlated to the nutritional effects they have on health, which is why the optimization of the structural characterization process is also necessary. Therefore, this review aims to summarize the progress made by research in this field, so as to contribute to the exploitation of hazelnut waste streams through a circular economy approach, increasing the value of this biomass through the production of new functional ingredients.

Effects of exogenous β-glucanase on ileal digesta soluble β-glucan molecular weight, digestive tract characteristics, and performance of coccidiosis vaccinated broiler chickens fed hulless barley-based diets with and without medication

Introduction

Limited use of medication in poultry feed led to the investigation of exogenous enzymes as antibiotic alternatives for controlling enteric disease. The objective of this study was to evaluate the effects of diet β-glucanase (BGase) and medication on β-glucan depolymerization, digestive tract characteristics, and growth performance of broilers.

Materials and methods

Broilers were fed hulless barley (HB) based diets with BGase (Econase GT 200P from AB Vista; 0 and 0.1%) and medication (Bacitracin and Salinomycin Na; with and without) arranged as a 2 × 2 factorial. In Experiment 1, 160 broilers were housed in cages from d 0 to 28. Each treatment was assigned to 10 cages. In Experiment 2, broilers (2376) were housed in floor pens and vaccinated for coccidiosis on d 5. Each treatment was assigned to one floor pen in each of nine rooms.

Results

In Experiment 1, the soluble β-glucan weighted average molecular weight (Mw) in the ileal digesta was lower with medication in the 0% BGase treatments. Peak molecular weight (Mp) and Mw were lower with BGase regardless of medication. The maximum molecular weight for the smallest 10% β-glucan (MW-10%) was lower with BGase addition. In Experiment 2, Mp was lower with medication in 0% BGase treatments. Beta-glucanase resulted in lower Mp regardless of medication, and the degree of response was lower with medication. The MW-10% was lower with BGase despite antibiotic addition. Body weight gain and feed efficiency were higher with medication regardless of BGase use through-out the trial (except d 11–22 feed efficiency). Beta-glucanase resulted in higher body weight gain after d 11 and worsened and improved feed efficiency before and after d 11, respectively, in unmedicated treatments.

Conclusion

BGase and medication caused the depolymerization of soluble ileal β-glucan. Beta-glucanase acted as a partial replacement for diet medication by increasing growth performance in coccidiosis vaccinated broilers.

Thermally-induced hyperbranching of bromine-containing polyesters by insertion of in situ generated chain-end carbenes

Hyperbranched, biodegradable PCL-based polymers are obtained through a random but invasive migration of an in situ generated carbene end group which is unmasked via the thermolysis of its precursor diazirine moiety. These hyperbranched cores are used as macroinitiators for 'grafting-from' polymerisation using controlled radical polymerisation to achieve amphiphilic copolymers which can subsequently be self-assembled into spherical core-shell micelles.

Novel consortia of enterobacter and pseudomonas formulated from cow dung exhibited enhanced biodegradation of polyethylene and polypropylene

This study prioritizes the biodegradation potential of novel bacterial consortia formulated from cow dung samples towards low-density polyethylene (LDPE) and polypropylene (PP) in comparison with our previous studies. Ten possible consortia were formulated using 10 selected isolates with >10% weight reduction of LDPE and PP, these were pre-treated under UV for 1 h, and their biodegradation potential was studied for 160 days. The isolates present in prioritized consortia were characterized by standard microbiology and 16SrRNA gene sequencing methods. Out of 10 bacterial consortia formulated, potential consortium-CB3 showed greater percentage degradation (weight reduction) of 64.25 ± 2% and 63.00 ± 2% towards LDPE and PP films, respectively (p < 0.05) at 37 °C compared to other consortia. Significant structural variations due to the formation of bacterial biofilm were observed in CB3 treated LDPE and PP films. The three bacteria-IS1, IS2, and IS3-that constituted CB3 were found to be novel strains and designated to be Enterobacter sp nov. bt DSCE01, Enterobacter cloacae nov. bt DSCE02, and Pseudomonas aeruginosa nov. bt DSCE-CD03, respectively. This novel consortium can be scaled up for enhanced degradation of plastic polymers and probably design cost-effective bio-digester for industrial applications using CB3 as potential inoculum.

Mass Spectrometry Imaging of Bio-oligomer Polydispersity in Plant Tissues by Laser Desorption Ionization from Silicon Nanopost Arrays

Mass spectrometry imaging (MSI) enables simultaneous spatial mapping for diverse molecules in biological tissues. Matrix-assisted laser desorption ionization (MALDI) mass spectrometry (MS) has been a mainstream MSI method for a wide range of biomolecules. However, MALDI-MSI of biological homopolymers used for energy storage and molecular feedstock is limited by, e.g., preferential ionization for certain molecular classes. Matrix-free nanophotonic ionization from silicon nanopost arrays (NAPAs) is an emerging laser desorption ionization (LDI) platform with ultra-trace sensitivity and molecular imaging capabilities. Here, we show complementary analysis and MSI of polyhydroxybutyric acid (PHB), polyglutamic acid (PGA), and polysaccharide oligomers in soybean root nodule sections by NAPA-LDI and MALDI. For PHB, number and weight average molar mass, polydispersity, and oligomer size distributions across the tissue section and in regions of interest were characterized by NAPA-LDI-MSI.

Polymeric stationary phases for size exclusion chromatography: A review

Synthetic and natural macromolecules are commonly used in a variety of fields such as plastics, nanomedicine, biotherapeutics, drug delivery and tissue engineering. Characterising macromolecules in terms of their structural parameters (size, molar mass and distribution, architecture) is key to have a better understanding of their structure-property relationships. Size exclusion chromatography (SEC) is a commonly used technique for polymer characterization since it offers access to the determination of the size of a macromolecule, its molar mass and the molar mass distribution. Moreover, detectors that allow the determination of true molar masses, macromolecule's architecture and the composition of copolymers can be coupled to the chromatographic system. Like other chromatographic techniques, the stationary phase is of paramount importance for efficient SEC separations. This review presents the basic principles for the design of stationary phases for SEC as well as synthetic methods currently used in the field. Current status of fully-porous polymeric stationary phases used in SEC is reviewed and their advantages and limitations are also discussed. Finally, the potential of polymer monoliths in SEC is also covered, highlighting the limitations this column technology could address. However, further development in the polymer structure is needed to consider this column technology in the field of macromolecule separation.

Differences between two sodium hyaluronate-based submucosal injection materials currently used in Japan based on viscosity analysis

In Japan, two 0.4% sodium hyaluronate (HA)-based submucosal injection materials (SIMs) are currently used in endoscopic submucosal dissection (ESD): MucoUp (HA-Mc) and Ksmart (HA-Ks). HA-Mc and HA-Ks have the same concentration and are, thus, construed by most endoscopists to have no difference. Nevertheless, visual observation conveys the impression that HA-Ks have a higher viscosity than HA-Mc, suggesting that HA-Ks performs better than HA-Mc. This study aimed to examine the differences between HA-Mc and HA-Ks. HA-Ks exhibited higher viscosity due to greater weight-average molecular weight compared with HA-Mc. HA-Ks had significantly greater submucosal elevation height (SEH) than HA-Mc; the SEH of HA-Ks-80% (80% dilution of HA-Ks) was the same as that of HA-Mc. The ESD procedure time was significantly shorter with HA-Ks than with HA-Mc (15.2 ± 4.1 vs. 19.5 ± 5.9; P = 0.049). The total injection volume for HA-Ks was significantly lower than that for HA-Mc (10.8 ± 3.6 vs. 14.4 ± 4.6; P = 0.045). However, no significant difference in these items was observed between HA-Mc and HA-Ks-80%. HA-Mc and HA-Ks were considered to be almost the same. Nonetheless, HA-Ks exhibited higher viscosity and SIM performance than HA-Mc. HA-Ks-80% had almost the same performance as HA-Mc. Thus, understanding SIM performance and characteristics requires a focus on the viscosity of SIMs.

A review of extracellular polysaccharides from extreme niches: An emerging natural source for the biotechnology. From the adverse to diverse!

Every year, new organisms that survive and colonize adverse environments are discovered and isolated. Those organisms, called extremophiles, are distributed throughout the world, both in aquatic and terrestrial environments, such as sulfurous marsh waters, hydrothermal springs, deep waters, volcanos, terrestrial hot springs, marine saltern, salt lakes, among others. According to the ecosystem inhabiting, extremophiles are categorized as thermophiles, psychrophiles, halophiles, acidophiles, alkalophilic, piezophiles, saccharophiles, metallophiles and polyextremophiles. They have developed chemical adaptation strategies that allow them to maintain their cellular integrity, altering physiology or improving repair capabilities; one of them is the biosynthesis of extracellular polysaccharides (EPS), which constitute a slime and hydrated matrix that keep the cells embedded, protecting from environmental stress (desiccation, salinity, temperature, radiation). EPS have gained interest; they are explored by their unique properties such as structural complexity, biodegradability, biological activities, and biocompatibility. Here, we present a review concerning the biosynthesis, characterization, and potential EPS applications produced by extremophile microorganisms, namely, thermophiles, halophiles, and psychrophiles. A bibliometric analysis was conducted, considering research articles published within the last two decades. Besides, an overview of the culture conditions used for extremophiles, the main properties and multiple potential applications of their EPS is also presented.