Liposomes loaded with quantum dots for ultrasensitive on-site determination of aflatoxin M1 in milk products

Nanoliposome based biosensors for probing mycotoxins and their applications for food: A review

Mycotoxins are the most common feed and food contaminants affecting animals and humans, respectively; continuous exposure causes tremendous health problems such as kidney disorders, infertility, immune suppression, liver inflammation, and cancer. Consequently, their control and quantification in food materials is crucial. Biosensors are potential tools for the rapid detection and quantification of mycotoxins with high sensitivity and selectivity. Nanoliposomes (NLs) are vesicular carriers formed by self-assembling phospholipids that surround the aqueous cores. Utilizing their biocompatibility, biodegradability, and high carrying capacity, researchers have employed NLs in biosensors for monitoring various targets in biological and food samples. The NLs are used for surface modification, signal marker delivery, and detection of toxins, bacteria, pesticides, and diseases. Here, we review marker-entrapped NLs used in the development of NL-based biosensors for mycotoxins. These biosensors are sensitive, selective, portable, and cost-effective analytical tools, and the resulting signal can be produced and/or amplified with or without destroying the NLs. In addition, this review emphasizes the benefits of the immunoliposome method in comparison with traditional detection approaches. We expect this review to serve as a valuable reference for researchers in this rapidly growing field. The insights provided may facilitate the rational design of next-generation NL-based biosensors.

Development of carbon quantum dot-based lateral flow immunoassay for sensitive detection of aflatoxin M1 in milk

Currently, there is a great demand for simple, sensitive, and accurate sensors for aflatoxin M1 (AFM1) in dairy products. In the present research, a novel fluorescent immunosensor based on nitrogen-doped carbon quantum dots (CQDs) has been developed for AFM1 analysis. The N-doped CQDs were synthesized through the hydrothermal approach using citric acid and polyethyleneimine as precursors. The CQDs showed bright blue emission under ultraviolet light irradiation and a maximum emission was observed at 450 nm upon excitation at 350 nm. The anti-AFM1 antibody (Ab) was immobilized on the as-obtained amine-functionalized CQDs and the obtained CQDs/Ab probe was then directly used for developing the immunoassays for AFM1. The fluorescence of the CQDs/Ab solution was effectively quenched in the presence of increasing AFM1 concentrations. Under the optimized conditions, the fluorescent nanosensor exhibited high sensitivity towards AFM1 in the range of 0.2-0.8 ng/mL with low limit of detection i.e., 0.07 ng/mL in standard buffer. Furthermore, the CQDs/Ab immunosensor was developed as a lateral flow design for detecting the aflatoxin residues in milk. This strategy can be used for the development of low-cost, rapid, and highly sensitive sensor strips for the detection of AFM1 in dairy products.

Design and Evaluation of a Competitive Phosphorescent Immunosensor for Aflatoxin M1 Quantification in Milk Samples Using Mn:ZnS Quantum Dots as Antibody Tags

Aflatoxin M1 (AFM1) is one of the most widespread aflatoxins that can be present in the milk of lactating mammals. It can cause carcinogenicity, mutagenesis, teratogenesis, genotoxicity and immunosuppression. The WHO recommends reducing the AFM1 concentration in food products, so the European Commission has set a maximum allowable limit of 0.05 µg L−1 in milk and its products. Thus, there is a need to develop new methodologies to satisfy the demand for reliable, cost-effective, robust and sensitive AFM1 routine controls. In the present work, a competitive phosphorescent immunosensor for AFM1 quantification in milk, based on antibody–antigen recognition and Mn:ZnS quantum dots (d-QDs) as photoluminescent labels, has been developed. Two different assay strategies based on the use of d-QDs as labels of secondary antibodies (direct assay), or of a derivative species of the antigen AFM1-Bovine Serum Albumin (indirect assay) were compared in terms of analytical performance for AFM1 quantification. The best analytical results were obtained with the immunoassay format that uses d-QDs as tags of secondary antibodies (direct assay), and said design was finally selected. The selected immunosensor provided a detection limit for AFM1 quantification of only 0.002 µg L−1, which greatly satisfied the maximum tolerable limit of AFM1 in milk of 0.05 µg L−1. The accuracy, calculated as recovery of AFM1 in fortified skimmed milk samples, ranged from 81 to 90%, with relative standard deviations from 3% to 14%. These results bring to light the good performance of such phosphorescent biosensors as simple and fast alternatives to conventional chromatographic analytical methods.

Recent progress in visual methods for aflatoxin detection

Aflatoxins (AFs) contamination in food and agricultural products poses a significant threat to human health. Sensitive and accurate detection of AFs provides a strong guarantee for ensuring food safety. Conventional chromatographic-based or mass spectrum methods, which rely on bulky instrument and skilled personnel, are not suitable for on-site surveillance. By contrast, visual detections which possess the merits of rapidity and sophisticated instrument-free present an excellent potential for the on-site detection of AFs. This review intends to summarize the latest development of visual methods for AFs detection, including paper-based tests, chromogenic reactions, and luminescent methods. Emerging technologies, like nanotechnology, DNAzymes, and aptamers combined with these visual methods are introduced. The basic principles, features, and application advantages of each type of visual methods are discussed. The biggest challenges and perspectives on their future trends are also addressed.

Aptasensors for mycotoxin detection: A review

Mycotoxins are toxic compounds produced by fungi, which represent a risk to the food and feed supply chain, having an impact on health and economies. A high percentage of feed samples have been reported to be contaminated with more than one type of mycotoxin. Systematic, cost-effective and simple tools for testing are critical to achieve a rapid and accurate screening of food and feed quality. In this review, we describe the various aptamers that have been selected against mycotoxins and their incorporation into optical and electrochemical aptasensors, outlining the strategies exploited, highlighting the advantages and disadvantages of each approach. The review also discusses the different materials used and the immobilization methods employed, with the aim of achieving the highest sensitivity and selectivity.

Rapid, on-site and quantitative paper-based immunoassay platform for concurrent determination of pesticide residues and mycotoxins

Mycotoxins and pesticides are prevalent in cereal food. It is difficult to detect these two kinds of hazard factors simultaneously in rapid assay. In order to find a solution to the problem, carbamates and aflatoxins were selected in this study to establish a rapid, on-site, and quantitative paper sensor. Two novel monoclonal antibodies (mAbs) against carbaryl and carbofuran (1D2 and G11) were developed. The IC50 values (half maximal inhibitory concentration) were 0.8 ng/mL and 217.6 ng/mL for carbaryl and carbofuran, respectively. Based on the sensitive and specific mAbs, a multi-TRFICA (time-resolved fluorescence) paper sensor was developed, which simultaneously detected six types of hazardous chemicals, including AFB1, AFB2, AFG1, AFG2, carbaryl, and carbofuran. A universal sample pretreatment method for mycotoxins and pesticides was explored to apply on established competitive indirect enzyme-linked immunosorbent assay (icELISA) and multi-TRFICA-paper sensor. The established paper sensor can be easily observed with naked eyes, qualitatively under a UV lamp, and quantitated using a home-made device. It exhibited a calculated limit of quantity for AFTs, carbaryl, and carbofuran of 0.03, 0.02, and 60.2 ng/mL in corn samples, respectively. The spiking-recoveries and real sample studies proved that multi-TRFICA-paper sensor is an accurate, sensitive, and high throughput detection method for simple and low-cost analysis in corn samples.

Quantum bead-based fluorescence-linked immunosorbent assay for ultrasensitive detection of aflatoxin M1 in pasteurized milk, yogurt, and milk powder

Herein, we reported a novel direct competitive fluorescence-linked immunosorbent assay (dcFLISA) for the ultrasensitive detection of aflatoxin M₁ (AFM₁) in pasteurized milk, yogurt, and milk powder using 150-nm quantum dot beads (QB) as the carrier of competing antigen. Large QB were applied to decrease the binding affinity of the competing antigen to antibody and enhance the fluorescent signal intensity. The aflatoxin B₁ molecule was used as the surrogate of AFM₁ to label with BSA on the surface of QB because of its 63% cross reaction to anti-AFM₁ mAb. The binding affinity of the competing antigen to mAb was tuned by changing the labeled molar ratios of aflatoxin B₁ to BSA. Through combining the advantages of QB as the carrier of the competing antigen, including low binding affinity to mAb and highly fluorescent signal output, the proposed dcFLISA exhibited an ultrahigh sensitivity for AFM₁ detection, with a half-maximal inhibitory concentration of 3.15 pg/mL in 0.01 M phosphate-buffered saline solution (pH 7.4), which is substantially lower than that of the traditional horseradish peroxidase-based ELISA. The proposed method also exhibited very low detection limitations of 0.5, 0.6, and 0.72 pg/mL for real pasteurized milk, yogurt, and milk powder, respectively. These values are considerably below the maximum permissible level of the European Commission standard for AFM₁ in dairy products. In summary, the proposed dcFLISA offers a novel strategy with an ultrahigh sensitivity for the routine monitoring of AFM₁ in various dairy products.

Mycotoxin Determination in Foods Using Advanced Sensors Based on Antibodies or Aptamers

Mycotoxin contamination threatens health and life of humans and animals throughout the food supply chains. Many of the mycotoxins have been proven to be carcinogens, teratogens and mutagens. The reliable and sensitive sensing methods are requested to monitor mycotoxin contamination. Advanced sensors based on antibodies or aptamers boast the advantages of high sensitivity and rapidity, and have been used in the mycotoxin sensing. These sensors are miniaturized, thereby lowering costs, and are applicable to high-throughput modes. In this work, the latest developments in sensing strategies for mycotoxin determination were critically discussed. Optical and electrochemical sensing modes were compared. The sensing methods for single mycotoxin or multiple mycotoxins in food samples were reviewed, along with the challenges and the future of antibody or aptamer-based sensors. This work might promote academic studies and industrial applications for mycotoxin sensing.

Production of a monoclonal antibody against aflatoxin M1 and its application for detection of aflatoxin M1 in fortified milk

Aflatoxin M1 (AFM1) is a toxic metabolite of the fungal product aflatoxin found in milk. For food safety concern, maximum residual limits of AFM1 in milk and dairy products have been differently enforced in many countries. A suitable detection method is required to screen a large number of product samples for the AFM1 contamination. In this study, monoclonal antibodies (MAbs) against AFM1 were generated using a conventional somatic cell fusion technique. After screening, five MAbs (AFM1–1, AFM1–3, AFM1–9, AFM1–11, and AFM1–17) were obtained that showed cross-reactivity with aflatoxin B1 (AFB1) and aflatoxin G1 (AFG1) but with no other tested compounds. An indirect competitive enzyme-linked immunosorbent assay (ELISA) using a partially purified MAb and antigen-coated plates yielded the best sensitivity with the 50% inhibition concentration (IC₅₀) and the limit of detection (LOD) values of 0.13 ng/mL and 0.04 ng/mL, respectively. This indirect competitive ELISA was used to quantify the amount of fortified AFM1 in raw milk. The precision and accuracy in terms of % coefficient of variation (CV) and % recovery of the detection was investigated for both intra- (n = 6) and inter- (n = 12) variation assays. The % CV was found in the range of 3.50–15.8% and 1.32–7.98%, respectively, while the % recovery was in the range of 92–104% and 100–103%, respectively. In addition, the indirect ELISA was also used to detect AFM1 fortified in processed milk samples. The % CV and % recovery values were in the ranges of 0.1–33.0% and 91–109%, respectively. Comparison analysis between the indirect ELISA and high performance liquid chromatography was also performed and showed a good correlation with the R² of 0.992 for the concentration of 0.2–5.0 ng/mL. These results indicated that the developed MAb and ELISA could be used for detection of AFM1 in milk samples.

Developments in mycotoxin analysis: an update for 2013-2014

This review highlights developments in the determination of mycotoxins over a period between mid-2013 and mid-2014. It continues in the format of the previous articles of this series, emphasising on analytical methods to determine aflatoxins, Alternaria toxins, ergot alkaloids, fumonisins, ochratoxins, patulin, trichothecenes and zearalenone. The importance of proper sampling and sample preparation is briefly addressed in a dedicated section, while another chapter summarises new methods used to analyse botanicals and spices. As LC-MS/MS instruments are becoming more and more widespread in the determination of multiple classes of mycotoxins, another section is focusing on such newly developed multi-mycotoxin methods. While the wealth of published methods during the 12 month time span makes it impossible to cover every single one, this exhaustive review nevertheless aims to address and briefly discuss the most important developments and trends.

Preparation and characterization of stable phospholipid–silica nanostructures loaded with quantum dots

The structural dependence of silica–liposome hybrids on silanization conditions was investigated.

Development and application of a quantitative fluorescence-based immunochromatographic assay for fumonisin b1 in maize

A fluorescence-based immunochromatographic assay (ICA) for fumonisin B1 (FB1) that employs conjugates of fluorescent microspheres and monoclonal antibodies (FM-mAbs) as detection reporters is described. The ICA is based on the competitive reaction between FB1-bovine serum albumin (BSA; test line) and the target FB1 for binding to the FM-mAb conjugates. A limit of detection (LOD) for FB1 of 0.12 ng/mL was obtained, with an analytical working range of 0.25-2.0 ng/mL (corresponding to 250-2000 μg/kg in maize flour samples, according to the extraction procedure). The recoveries of the ICA to detect FB1 in maize samples ranged from 91.4 to 118.2%. A quantitative comparison of the fluorescence-based ICA and HPLC-MS/MS analysis of naturally contaminated maize samples indicated good agreement between the two methods (r(2) = 0.93). By replacing the target of interest, the FM-based ICA can easily be extended to other chemical contaminants and thus represents a versatile strategy for food safety analysis.