A fast and sensitive method for the separation of carotenoids using ultra-high performance supercritical fluid chromatography-mass spectrometry

Analysis of vitamin D and its metabolites in biological samples - Part I: Optimization and comparison of UHPSFC-MS/MS and UHPLC-MS/MS methods

Fat-soluble vitamin D is an essential bioactive compound important for human health. Insufficient vitamin D levels can result not only in bone disease but also in other disorders, such as cancer, metabolic disorders, and diseases related to poor immune function. The current methods commonly used for vitamin D analysis are often applied to determine the levels of the most abundant metabolite in plasma, i.e., 25-OH-D2/D3. These methods do not consider the presence of other hydroxylated and esterified metabolites, including isomers and epimers, which are typically found in low concentrations. In this study, we developed a fast and selective ultra-high performance supercritical fluid chromatography (UHPSFC) method using a 150 mm long 1-amino anthracene (1-AA) column and a mobile phase consisting of carbon dioxide and methanol/isopropanol (1/1, v/v) mixed with 8 % water. After thorough optimization of column temperature and back pressure, the separation of four vitamin D3 esters, vitamin D3 and D2, and eight mono- and di-hydroxylated metabolites, including three groups of isomers, was achieved in 10 min. Two ion sources, atmospheric pressure chemical ionization (APCI) and atmospheric pressure photoionization optimized within this study, were compared in tandem mass spectrometry (MS/MS) detection. No significant sensitivity differences were observed. Subsequently, the same 1-AA column chemistry was examined in ultra-high performance liquid chromatography (UHPLC) as the stationary phase that could hypothetically bring different selectivity in the separation of vitamin D and its metabolites. However, this hypothesis was rejected, and C18 was used as a stationary phase in the final optimized UHPLC-MS/MS method. Despite detailed optimization, the final 15 min UHPLC method was not able to separate di-hydroxylated isomers of vitamin D3, while it enabled better resolution of esterified forms compared to UHPSFC. Optimized methods provided similar repeatability of retention times and peak areas, with RSD < 2 % and 10 %, respectively. The lowest limits of quantification were in the range of 1.2 - 4.9 ng/mL for UHPSFC-APCI-MS/MS, while for UHPLC-APCI-MS/MS, they were typically in the range of 2.6 - 9.6 ng/mL. Based on the obtained results, the UHPSFC-APCI-MS/MS method was the most promising approach for fast, selective, and sensitive analysis that could be applied in the analysis of biological samples with emphasis on the separation of both hydroxylated and esterified metabolites, including isomeric forms.

A powerful two-dimensional chromatography method for the non-target analysis of depolymerised lignin

BACKGROUND

Lignin is an abundant natural polymer obtained as a by-product from the fractionation of lignocellulosic biomass. In the name of a circular economy, lignin should be valorised into valuable chemicals or biomaterials and utilised instead of petrochemicals. For the development of efficient valorisation processes, the structural characterisation of lignin can be highly beneficial. However, this is an arduous task, as the isolated (and sometimes processed) lignin mainly consists of various neutral monomers but also oligomers. In addition, the material contains isomers, which can be especially problematic to separate and identify.

RESULTS

We present a powerful off-line comprehensive two-dimensional (2D) chromatography method combining liquid chromatography (LC), supercritical fluid chromatography (SFC), and high-resolution mass spectrometry for the non-target analysis of depolymerised lignin. The implementation of a 1-aminoanthracene column in the second dimension enabled a class separation of potential lignin monomers, dimers, trimers, and tetramers with an additional separation based on the number of hydroxyl groups and steric effects. The pentafluorophenyl column in the first dimension additionally improved the separation based on hydrophobicity. The comparison of off-line 2D LC × SFC to 1D SFC showed that besides the overall improved performance, the first method is also superior for the separation of isomers. Advanced data analysis methods (MS-DIAL, SIRIUS, and Feature-Based Molecular Network) were integrated into the non-target workflow to rapidly visualise and study the detected compounds, which proved to be especially beneficial for the characterisation of the separated isomers.

SIGNIFICANCE

The method yielded the first 2D LC plot demonstrating a classification of lignin compounds, which can be applied to compare various lignin sources and processing methods. In addition, the technique demonstrated improved separation of compounds, including isomers, which was especially beneficial as 77 % of the detected compounds had at least one isomer in the same lignin sample.

Applicability of supercritical fluid chromatography for oligonucleotide analysis: A proof-of-concept study

We evaluated the suitability of supercritical fluid chromatography (SFC) for oligonucleotide analysis using 4-mer oligonucleotides with various phosphorothioate (PS) contents as model compounds. Column screening showed that the diol-modified column was able to separate sequences with different PS contents. Optimization of the column body and additives allowed us to analyze polar oligonucleotides using SFC. Various sequences were also analyzed using the optimized method. A good peak shape was obtained when the guanine plus cytosine content of the analyte was two or less in the 4-mer oligonucleotides. Furthermore, we found that the retention times of the selected sequences were positively correlated with polar surface areas, indicating that oligonucleotides interact with polar stationary phases. In contrast, more hydrophobic full PS sequences were retained more strongly in the diol column than the full phosphodiester (PO) sequences. This suggests that the diol column has unique selectivity for PO and PS linkages. These results indicate that SFC is potentially applicable to oligonucleotide analysis with a separation mechanism that is different from that of ion-pair reversed-phase liquid chromatography.

Extractability, selectivity, and comprehensiveness in supercritical fluid extraction of seaweed using ternary mixtures of carbon dioxide, ethanol, and water

It is well-known that an ideal extraction method enabling quantitative analysis should give complete extraction of the target analytes as well as minimal co-extraction of unwanted matrix substances. If the extraction method is part of a nontarget screening protocol, the desired analytes can differ widely in terms of chemical properties. In chromatography, terminologies such as recovery, selectivity, and comprehensiveness are well-established and can easily be determined. However, in extraction, these concepts are much less developed. Hence, the aim of our research is to develop and scrutinize theory in extraction with respect to numerical descriptors for extractability, selectivity, and comprehensiveness. Our approach is based on experiments determining the extractability of target analytes and selected interferences. As a case study, we use a pooled sample of three species of seaweed (Alaria esculenta, Laminaria digitata and Ascophyllum nodosum). Target analytes are β-carotene, fucoxanthin, δ-tocopherol, and phloroglucinol; and selected interferences are carbohydrates, proteins, ash, arsenic, and chlorophyll a. As a "green and clean" extraction technique, supercritical fluid extraction (SFE) using mixtures of CO2, ethanol and water were explored using a design of experiment. The temperature was varied between 40-80°C, and the pressure was held constant at 300 bar. Obtained results clearly demonstrate that highest relative selectivity was achieved with CO2 containing only 5 vol% of ethanol and no water, which primarily enabled high extractability of β-carotene, and yielding an extract free of carbohydrates, proteins, and toxic metals such as arsenic. Best methods for highest extractability of the other target analytes varied quite widely. Analytes requiring the highest water content (fucoxanthin and phloroglucinol), also resulted in the lowest relative selectivity. Maximum relative comprehensiveness was achieved using CO2/ethanol/water (40/55/5, v/v/v) at 70°C and 300 bar. Our study demonstrates the feasibility of using relative quantitative descriptors for extractability, selectivity, and comprehensiveness, in optimization strategies for analytical extractions.

Advanced Development of Supercritical Fluid Chromatography in Herbal Medicine Analysis

The greatest challenge in the analysis of herbal components lies in their variety and complexity. Therefore, efficient analytical tools for the separation and qualitative and quantitative analysis of multi-components are essential. In recent years, various emerging analytical techniques have offered significant support for complicated component analysis, with breakthroughs in selectivity, sensitivity, and rapid analysis. Among these techniques, supercritical fluid chromatography (SFC) has attracted much attention because of its high column efficiency and environmental protection. SFC can be used to analyze a wide range of compounds, including non-polar and polar compounds, making it a prominent analytical platform. The applicability of SFC for the separation and determination of natural products in herbal medicines is overviewed in this article. The range of applications was expanded through the selection and optimization of stationary phases and mobile phases. We also focus on the two-dimensional SFC analysis. This paper provides new insight into SFC method development for herbal medicine analysis.

iTRAQ-Based Quantitative Proteomics Analysis Reveals the Mechanism of Golden-Yellow Leaf Mutant in Hybrid Paper Mulberry

Plant growth and development relies on the conversion of light energy into chemical energy, which takes place in the leaves. Chlorophyll mutant variations are important for studying certain physiological processes, including chlorophyll metabolism, chloroplast biogenesis, and photosynthesis. To uncover the mechanisms of the golden-yellow phenotype of the hybrid paper mulberry plant, this study used physiological, cytological, and iTRAQ-based proteomic analyses to compare the green and golden-yellow leaves of hybrid paper mulberry. Physiological results showed that the mutants of hybrid paper mulberry showed golden-yellow leaves, reduced chlorophyll, and carotenoid content, and increased flavonoid content compared with wild-type plants. Cytological observations revealed defective chloroplasts in the mesophyll cells of the mutants. Results demonstrated that 4766 proteins were identified from the hybrid paper mulberry leaves, of which 168 proteins displayed differential accumulations between the green and mutant leaves. The differentially accumulated proteins were primarily involved in chlorophyll synthesis, carotenoid metabolism, and photosynthesis. In addition, differentially accumulated proteins are associated with ribosome pathways and could enable plants to adapt to environmental conditions by regulating the proteome to reduce the impact of chlorophyll reduction on growth and survival. Altogether, this study provides a better understanding of the formation mechanism of the golden-yellow leaf phenotype by combining proteomic approaches.

A technical overview of supercritical fluid chromatography-mass spectrometry (SFC-MS) and its recent applications in pharmaceutical research and development

In this paper, we review the growing development and applications of supercritical fluid chromatography-mass spectrometry (SFC-MS) for the analysis of small molecular analytes and biomarkers in drug discovery. As an alternative chromatographic technique, SFC instrumentation and methodology have dramatically advanced over the last decade. Mass spectrometry (MS) provides the powerful detection capability as it couples with SFC. A growing number of SFC-MS/MS applications were reported over the last decade and the application areas of SFC-MS/MS is rapidly expanding. The first part of this review is devoted to the different aspects of SFC-MS development and recent technological advancements. In the second part of this review, we highlight the recent application areas in pharmaceutical research and development.

Supercritical fluid chromatography for the analysis of natural dyes: From carotenoids to flavonoids

Plant-derived natural dyes are used in a variety of formulated products, from food to cosmetics and pharmaceutics. In addition to their color, they also provide some bioactivity. While they are mostly analyzed with high-performance liquid chromatography, supercritical fluid chromatography was also employed for several dye families, mostly for carotenoids and chlorophylls, and more recently for anthraquinones and flavonoids. These supercritical fluid chromatography methods are described in this review. Because the dyes have different structures and structural variations (polarity, isomers, etc.), the best chromatographic system to achieve their separation is not always the same. Hydrophobic stationary phases are preferred for the most hydrophobic dyes (chlorophylls and carotenoids) while polar stationary phases are preferred for the polar dyes (anthraquinones and flavonoids). Regarding the mobile phase composition, chlorophylls and carotenoids are best eluted with moderate proportions of co-solvent in CO₂ (about 40%), while the most polar glycosylated flavonoids require higher proportions of co-solvent and acidic additives. Because dyes are colorful, ultraviolet-visible detection is often sufficient, while mass spectrometry offers additional structural information. Furthermore, fundamental information can also be gained through chromatographic analysis of dyes: either solubility in supercritical fluids, in view of their extraction, or retention behavior providing an understanding of stationary phase properties.

Unified chromatography - Mass spectrometry as a versatile tool for determination of food dyes

Unified chromatography with mass spectrometric detection was assessed for determination of food dyes. Nineteen substances representing azo, triphenylmethane, xanthone, indigoid, quinoline and polyene classes covering an unprecedented range from nonpolar β-Carotene (logD 13.6) to ionic Tartrazine (logD -7.5) were analyzed simultaneously. The dyes were separated in a single experimental run by an 18-min gradient elution from 98% CO₂ to 100% aqueous-methanolic modifier on a diol column. Isomeric substances were resolved, and Isatin Sulfonic acid was detected as a degradation product of Indigo Carmine. Mobile phase properties reproducibly changed from supercritical to liquid state ensuring stable retention times (inter-day RSD<0.5%). Quantitative analysis of sports drinks after straightforward 10- or 25-fold dilution with dimethyl sulfoxide confirmed the method applicability to real-life samples. Sufficient limits of detection (typically 0.025 mg L^-1 in processed samples, equivalent to 0.25 mg L^-1 in drink) and a wide linear range (typically 0.5-50 mg L^-1 or 1.3-125 mg L^-1 in drink for 10× or 25× dilution, respectively) were demonstrated during validation. A comparison of method performance with competitive liquid chromatography procedures is also provided. Unified chromatography is a promising tool for comprehensive multiclass analysis of dyes in the context of food safety.

A comprehensive review on carotenoids in foods and feeds: status quo, applications, patents, and research needs

Carotenoids are isoprenoids widely distributed in foods that have been always part of the diet of humans. Unlike the other so-called food bioactives, some carotenoids can be converted into retinoids exhibiting vitamin A activity, which is essential for humans. Furthermore, they are much more versatile as they are relevant in foods not only as sources of vitamin A, but also as natural pigments, antioxidants, and health-promoting compounds. Lately, they are also attracting interest in the context of nutricosmetics, as they have been shown to provide cosmetic benefits when ingested in appropriate amounts. In this work, resulting from the collaborative work of participants of the COST Action European network to advance carotenoid research and applications in agro-food and health (EUROCAROTEN, www.eurocaroten.eu, https://www.cost.eu/actions/CA15136/#tabs|Name:overview) research on carotenoids in foods and feeds is thoroughly reviewed covering aspects such as analysis, carotenoid food sources, carotenoid databases, effect of processing and storage conditions, new trends in carotenoid extraction, daily intakes, use as human, and feed additives are addressed. Furthermore, classical and recent patents regarding the obtaining and formulation of carotenoids for several purposes are pinpointed and briefly discussed. Lastly, emerging research lines as well as research needs are highlighted.

Carotenoid and Apocarotenoid Analysis by SFE-SFC-QqQ/MS

Carotenoids and carotenoids oxidative and enzymatic cleavage products called apocarotenoids are very important bioactive molecules in plants and humans, with different biological functions. Both central and noncentral carotenoid cleavage products have been reported to occur in food and in humans, where they may act as bioactive molecules with functions that were previously attributed to the parent carotenoid. However, relatively few studies are available in the literature on the apocarotenoid occurrence in food and biological fluids which were mainly based on liquid chromatographic separation approaches and even fewer reports are available on the carotenoid and apocarotenoid separation by a direct online supercritical fluid extraction-supercritical fluid chromatography with triple-quadrupole mass spectrometry detection (SFE-SFC-QqQ/MS) methodology. In comparison with offline approaches the online nature of the system drastically reduces the extraction time required in traditional solid/liquid extraction, which may require a few hours. Moreover, it reduces the analysis run time, as well as the risks of sample contamination and the possible occurrence of operator errors, improves run-to-run precision, and enables the setting of batch-type applications. The purpose of this contribution was to provide an updated description of the SFE-SFC-QqQ/MS methodology applied to carotenoid and apocarotenoid analysis in various matrices, although with a particular focus on the apocarotenoid applications.

Engineering the carotenoid biosynthetic pathway in Rhodothermus marinus for lycopene production

Rhodothermus marinus has the potential to be well suited for biorefineries, as an aerobic thermophile that produces thermostable enzymes and is able to utilize polysaccharides from different 2nd and 3rd generation biomass. The bacterium produces valuable chemicals such as carotenoids. However, the native carotenoids are not established for industrial production and R. marinus needs to be genetically modified to produce higher value carotenoids. Here we genetically modified the carotenoid biosynthetic gene cluster resulting in three different mutants, most importantly the lycopene producing mutant TK-3 (ΔtrpBΔpurAΔcruFcrtB::trpBcrtB_{T.thermophilus}). The genetic modifications and subsequent structural analysis of carotenoids helped clarify the carotenoid biosynthetic pathway in R. marinus. The nucleotide sequences encoding the enzymes phytoene synthase (CrtB) and the previously unidentified 1′,2′-hydratase (CruF) were found fused together and encoded by a single gene in R. marinus. Deleting only the cruF part of the gene did not result in an active CrtB enzyme. However, by deleting the entire gene and inserting the crtB gene from Thermus thermophilus, a mutant strain was obtained, producing lycopene as the sole carotenoid. The lycopene produced by TK-3 was quantified as 0.49 ​g/kg CDW (cell dry weight).

•

Genetically engineered Rhodothermus marinus produces lycopene instead of native γ-carotenoids.

•

A gene encoding 1′,2′-hydratase (cruF) was identified in the genome, fused with the gene encoding phytoene synthase (crtB).

•

Marker-replacement of the cruF-crtB gene with the crtB from Thermus thermophilus resulted in the R. marinus mutant TK-3.

•

The mutant strain TK-3 produced lycopene as the sole carotenoid (0.49 ​g/kg CDW).

Two-dimensional liquid chromatography analysis of all-trans-, 9-cis-, and 13-cis-astaxanthin in raw extracts from Phaffia rhodozyma

An effective two-dimensional liquid chromatography method has been established for the analysis of all-trans-astaxanthin and its geometric isomers from Phaffia rhodozyma employing a C18 column at the first dimension and a C30 column in the second dimension, connected by a 10-port valve using the photo-diode array detector. The regression equation of astaxanthin calibration curve was established, and the precision and accuracy values were found to be in the range of 0.32-1.14% and 98.21-106.13%, respectively. By using two-dimensional liquid chromatography, it was found that day light, ultrasonic treatment, and heat treatment have significant influence on the content of all-trans-astaxanthin in the extract from P. rhodozyma due to the transformation of all-trans-astaxanthin to cis-astaxanthin. The day light and ultrasonic treatments more likely transform all-trans-astaxanthin to 9-cis-astaxanthin, and the thermal treatment transforms all-trans-astaxanthin to 13-cis-astaxanthin. These results indicate that the two-dimensional liquid chromatography method can facilitate monitoring astaxanthin isomerization in the raw extract from P. rhodozyma. In addition, the study will provide a general reference for monitoring other medicals and bioactive chemicals with geometric isomers.

Chromatographic Fingerprint Analysis of Radix Hedysari Using Supercritical Fluid Chromatography Coupled with Diode Array Detector

A newly and rapid supercritical fluid chromatography method for the simultaneous determination of 11 active compounds in Radix Hedysari samples has been developed and validated. Optimum separation was achieved on a HSS SB C18 column with a gradient elution at a flow rate of 1.5 mL/min, back pressure of 11.03 Mpa and diode array detector at 260 nm. The results from the quantitative data showed that contents of these 11 active compounds were different from plant regions. Especially the contents of formononetin in the Minxian county are ~6-fold than in wild Radix Hedysari. The chromatographic fingerprint of Radix Hedysari was recorded under the same chromatographic condition. Data analytic procedure was performed to differentiate the 25 batches of Radix Hedysari samples. Data from chromatographic fingerprint were also analyzed using hierarchical cluster analysis. The results showed that 23 batches of Radix Hedysari samples had a high similarity (> 0.90) and overall 25 batches of sample were divided into two clusters. Moreover, according to the comparison contents of active compounds in each Radix Hedysari samples, the cultivated location of Radix Hedysari was successfully distinguished. This method presented good stability, repeatability and precision and would be a useful and reliable approach for the quality control of Radix Hedysari. Moreover, all target compounds were quantified by ultra-high performance liquid chromatography-time-of-flight mass spectrometry.

Green Extraction Approaches for Carotenoids and Esters: Characterization of Native Composition from Orange Peel

Orange peel is a by-product produced in large amounts that acts as a source of natural pigments such as carotenoids. Xanthophylls, the main carotenoid class found in citrus fruit, can be present in its free form or esterified with fatty acids, forming esters. This esterification modifies the compound’s chemical properties, affecting their bioavailability in the human body, and making it important to characterize the native carotenoid composition of food matrices. We aimed to evaluate the non-saponified carotenoid extracts of orange peel (cv. Pera) obtained using alternative green approaches: extraction with ionic liquid (IL), analyzed by high performance liquid chromatography coupled to a diode array detector with atmospheric pressure chemical ionization and mass spectrometry HPLC-DAD-APCI-MS, and supercritical fluid extraction (SFE), followed by supercritical fluid chromatography with atmospheric pressure chemical ionization and triple quadrupole mass spectrometry detection (SFC-APCI/QqQ/MS) in an online system. Both alternative green methods were successfully applied, allowing the total identification of five free carotenoids, one apocarotenoid, seven monoesters, and 11 diesters in the extract obtained with IL and analyzed by HPLC-DAD-APCI-MS, and nine free carotenoids, six carotenoids esters, 19 apocarotenoids, and eight apo-esters with the SFE-SFC-APCI/QqQ/MS approach, including several free apocarotenoids and apocarotenoid esters identified for the first time in oranges, and particularly in the Pera variety, which could be used as a fruit authenticity parameter.

Supercritical fluid chromatography-a technical overview and its applications in medicinal plant analysis: an update covering 2012-2018

Medicinal plants with complex matrices are endowed with a wide scope of biological activities. The separation, quantification, characterization and purification of bioactive components from herbal medicine extracts have always challenged analysts. Fortunately, the advancement of various emerging techniques has provided potent support for improving the method selectivity, sensitivity and run speeds in medicinal plant analyses. In recent years, the advent of new-generation supercritical fluid chromatography (SFC) instruments and a wide diversity of column chemistries, coupled with the intrinsic technical features of SFC, have made it an alternative and prominent analytical platform in the medicinal plant research area. This work aims to give a comprehensive overview of the fundamentals, technical advancement and investigating parameters of SFC in combination with three prevalent detectors. Moreover, the latest research progress of SFC applications in medicinal plant analyses is illuminated, with focus on herbal medicine-related SFC papers on the analytical and preparative scale that were published during the period of 2012 to December 2018. The most relevant applications were classified based on the constituents to be analysed. As for the respective research cases, analytical protocols and data processing strategies were provided, along with the indicated restrictions or superiority of the method; thus, the current status of SFC in medicinal plant analysis was presented.

Comparative transcriptome analyses reveal genes related to pigmentation in the petals of red and white Primula vulgaris cultivars

Primula vulgaris is an important ornamental plant species with various flower color. To explore the molecular mechanism of its color formation, comparative transcriptome analyses of the petals in red and white cultivars was performed. A total of 4451 differentially expressed genes were identified and annotated into 128 metabolic pathways. Candidate genes FLS, F3'H, DFR, ANS and AOMT in the anthocyanin pathway were expressed significantly higher in the red cultivar than the white and may be responsible for the red coloration. In the red petals, a putative transcription factors bHLH (c52273.graph_c0) was up-regulated about 14-fold, while a R2R3-MYB unigene (c36140.graph_c0) was identified as a repressor involved in anthocyanin regulation and was significantly down-regulated. In addition, the anatomy analyses and pigments composition in the red and white petals were also analyzed. The papillae on the adaxial epidermis of the red petals of P. vulgaris display a triangle-shapes, in contrast with a spherical shape for the white petals. Although flavonoids were detected in both cultivars, anthocyanins could only be identified in the red cultivar. Gossypetin and peonidin/rosinin were the most abundant pigments in red petals. This study shed light on the genetic and biochemistry mechanisms underlying the flower coloration in Primula.

Supercritical Fluid Chromatography with Photodiode Array Detection in the Determination of Fat-Soluble Vitamins in Hemp Seed Oil and Waste Fish Oil

In the presented study for the first time a new, optimized, fast SFC (supercritical fluid chromatography) method was applied to separate in one run fat-soluble vitamins from waste fish oil, including cis-and trans-retinyl palmitate, cis- and trans-retinyl acetate, retinol, α-tocopherol, β-tocopherol, γ‑tocopherol, δ-tocopherol, ergocalciferol (D₂), cholecalciferol (D₃), cis- and trans-phylloquinone (K₁) and menaquinone-4 (K₂-MK4). Vitamins were baseline separated on an Acquity UPC² (ultra performance convergence chromatography) HSS C18 SB (highly strength chemically modified silica) column within 13 min. The influence of the stationary phase, such as Torus 1-AA (1-aminoanthracene), Torus Diol (high density diol), Torus DEA (diethylamine), BEH (silica with no bonding), BEH-2EP (2-ethylpirydine), CSH Fluoro-Phenyl (silica with fluoro-phenyl groups), column temperature, flow rate and back pressure on the separation of the compounds was described. The application of the modified saponification procedure allowed us to increase concentration in the sample prepared for the analysis of γ‑tocopherol from less than 1% (wt %) to 14% for the first time. In addition, α‑tocopherol, γ‑tocopherol, δ‑tocopherol and retinol were identified in waste fish oil. Vitamin purification and analysis in waste fish oil are reported for the first time here. Due to the short time and effectiveness of the proposed method, it can be easily applied in industrial processes.

Rapid and Green Separation of Mono- and Diesters of Monochloropropanediols by Ultrahigh Performance Supercritical Fluid Chromatography-Mass Spectrometry Using Neat Carbon Dioxide as a Mobile Phase

This study demonstrates the effect of column selectivity and density of supercritical carbon dioxide (SC-CO₂) on the separation of monochloropropanediol (MCPD) esters, known as food toxicants, using SC-CO₂ without addition of cosolvent in ultrahigh performance supercritical fluid chromatography-mass spectrometry (UHPSFC-MS). This study shows that over 20 2-monochloropropanediol (2-MCPD) and 3-monochloropropanediol (3-MCPD) mono- and diesters are separated on a 2-picolylamine column in less than 12 min. The presence and position of a hydroxyl group in the structure, the number of unsaturated bonds, and the acyl chain length play a significant role in the separation of MCPD esters. The flow rate, backpressure, and column oven temperature, which affect the density of the mobile phase, were shown to have a substantial impact on retention, efficiency, and selectivity. The developed method was successfully applied for the determination of MCPD esters in refined oils and showed a close to excellent green analysis score using the Analytical Eco-Scale.