Critical assessment of digital PCR for the detection and quantification of genetically modified organisms

High-Resolution Melting (HRM) analysis of DNA methylation using semiconductor chip-based digital PCR

BACKGROUND

Digital PCR (dPCR) technology allows absolute quantification and detection of disease-associated rare variants, and thus the use of dPCR technology has been increasing in clinical research and diagnostics. The high-resolution melting curve analysis (HRM) of qPCR is widely used to distinguish true positives from false positives and detect rare variants. In particular, qPCR-HRM is commonly used for methylation assessment in research and diagnostics due to its simplicity and high reproducibility. Most dPCR instruments have limited fluorescence channels available and separate heating and imaging systems. Therefore, it is difficult to perform HRM analysis using dPCR instruments.

OBJECTIVE

A new digital real-time PCR instrument (LOAA) has been recently developed to integrate partitioning, thermocycling, and imaging in a single dPCR instrument. In addition, a new technique to perform HRM analysis is utilized in LOAA. The aim of the present study is to evaluate the efficiency and accuracy of LOAA dPCR on HRM analysis for the detection of methylation.

METHODS

In this study, comprehensive comparison with Bio-Rad qRT-PCR and droplet-based dPCR equipment was performed to verify the HRM analysis-based methylation detection efficiency of the LOAA digital PCR equipment. Here, sodium bisulfite modification method was applied to detect methylated DNA sequences by each PCR method.

RESULTS

Melting curve analysis detected four different Tm values using LOAA and qPCR, and found that LOAA, unlike qPCR, successfully distinguished between different Tm values when the Tm values were very similar. In addition, melting temperatures increased by each methylation were about 0.5℃ for qPCR and about 0.2 ~ 0.6℃ for LOAA. The melting temperature analyses of methylated and unmethylated DNA samples were conducted using LOAA dPCR with TaqMan probes and EvaGreen, and the result found that Tm values of methylated DNA samples are higher than those of unmethylated DNA samples.

CONCLUSION

The present study shows that LOAA dPCR could detect different melting temperatures according to methylation status of target sequences, indicating that LOAA dPCR would be useful for diagnostic applications that require the accurate quantification and assessment of DNA methylation.

First nanoplate digital PCR method to trace allergenic foods: Improved sensitivity for the detection of sesame

Sesame (Sesamum indicum L.) is an important allergenic food whose presence can be the cause of severe allergic reactions in sensitised individuals. In this work, nanoplate digital PCR (ndPCR) was used to develop two methods to detect trace amounts of sesame in processed foods and compared with previously proposed real-time PCR assays. Two independent ndPCR approaches were successfully advanced, achieving sensitivities of 5 and 0.1 mg/kg of sesame in dough/biscuits, targeting the CO6b-1 and ITS regions, respectively. The sensitivity using both targets was improved by one order of magnitude comparing with real-time PCR and was not affected by food processing. CO6b-1 system was not influenced by food matrix, exhibiting similar performance regardless the use of complex matrix extracts or serial diluted DNA. Herein, ndPCR was proposed for the first time for the detection of allergenic foods with the advantage of providing better performance than real-time PCR regarding sensitivity and robustness.

Present and Future Applications of Digital PCR in Infectious Diseases Diagnosis

Infectious diseases account for about 3 million deaths per year. The advent of molecular techniques has led to an enormous improvement in their diagnosis, both in terms of sensitivity and specificity and in terms of the speed with which a clinically useful result can be obtained. Digital PCR, or 3rd generation PCR, is based on a series of technical modifications that result in more sensitive techniques, more resistant to the action of inhibitors and capable of direct quantification without the need for standard curves. This review presents the main applications that have been developed for the diagnosis of viral, bacterial, and parasitic infections and the potential prospects for the clinical use of this technology.

Digital PCR for the characterization of reference materials

Well-characterized reference materials support harmonization and accuracy when conducting nucleic acid-based tests (such as qPCR); digital PCR (dPCR) can measure the absolute concentration of a specific nucleic acid sequence in a background of non-target sequences, making it ideal for the characterization of nucleic acid-based reference materials. National Metrology Institutes are increasingly using dPCR to characterize and certify their reference materials, as it offers several advantages over indirect methods, such as UV-spectroscopy. While dPCR is gaining widespread adoption, it requires optimization and has certain limitations and considerations that users should be aware of when characterizing reference materials. This review highlights the technical considerations of dPCR, as well as its role when developing and characterizing nucleic acid-based reference materials.

A digital PCR approach to assess the purity of oregano

Herbs and spices are food categories known to be at high risk of adulteration. Presence of undeclared foreign plant species has often been reported in oregano and may have a direct impact on its organoleptic quality and potentially the safety of this aromatic herb. A droplet digital PCR approach was developed to assess the purity of oregano by quantifying the DNA copies of oregano versus the total plant DNA copies. Nuclear single-copy genes were selected by targeting the terpene synthase 5 gene from oregano and the plant phosphoenolpyruvate carboxylase 2 gene. The reactions were specific to the Origanum genus and plant materials respectively, whereas trueness and precision data confirmed the reliability of the method to quantify oregano. The applicability of the method was further verified on proficiency test samples before being applied on commercial oregano samples.

The Development of a Series of Genomic DNA Reference Materials with Specific Copy Number Ratios for The Detection of Genetically Modified Maize DBN9936

The genetically modified (GM) maize DBN9936 with a biosafety certificate will soon undergo commercial application. To monitor the safety of DBN9936 maize, three genomic DNA (gDNA) reference materials (RMs) (DBN9936a, DBN9936b, and DBN9936c) were prepared with nominal copy number ratios of 100%, 3%, and 1% for the DBN9936 event, respectively. DBN9936a was prepared from the leaf tissue gDNA of DBN9936 homozygotes, while DBN9936b and DBN9936c were prepared by the quantitative mixing of gDNA from the leaf tissues of DBN9936 homozygotes and non-GM counterparts. Validated DBN9936/zSSIIb duplex droplet digital PCR was demonstrated to be an accurate reference method for conducting homogeneity study, stability study, and collaborative characterization. The minimum intake for one measurement was determined to be 2 μL, and the gDNA RMs were stable during transport at 37 °C for 14 days and storage at -20 °C for 18 months. Each gDNA RM was certified for three property values: DBN9936 event copy number concentration, zSSIIb reference gene copy number concentration, and DBN9936/zSSIIb copy number ratio. The measurement uncertainty of the certified values took the uncertainty components related to possible inhomogeneity, instability, and characterization into account. This batch of gDNA RMs can be used for calibration and quality control when quantifying DBN9936 events.

Digital PCR for Single-Cell Analysis

Single-cell analysis provides an overwhelming strategy for revealing cellular heterogeneity and new perspectives for understanding the biological function and disease mechanism. Moreover, it promotes the basic and clinical research in many fields at a single-cell resolution. A digital polymerase chain reaction (dPCR) is an absolute quantitative analysis technology with high sensitivity and precision for DNA/RNA or protein. With the development of microfluidic technology, digital PCR has been used to achieve absolute quantification of single-cell gene expression and single-cell proteins. For single-cell specific-gene or -protein detection, digital PCR has shown great advantages. So, this review will introduce the significance and process of single-cell analysis, including single-cell isolation, single-cell lysis, and single-cell detection methods, mainly focusing on the microfluidic single-cell digital PCR technology and its biological application at a single-cell level. The challenges and opportunities for the development of single-cell digital PCR are also discussed.

Applications of Digital Polymerase Chain Reaction (dPCR) in Molecular and Clinical Testing

BACKGROUND

Digital polymerase chain reaction (dPCR) is an accurate and sensitive molecular method that can be used in clinical diagnostic, prognostic, and predictive tests. The key component of the dPCR method is the partitioning of a single reaction into many thousands of droplets, nanochannels or other nano- or picoliter-sized reactions. This results in high enough sensitivity to detect rare nucleic acid targets and provides an absolute quantification of target sequences or alleles compared to other PCR-based methods.

CONTENT

An increasing number of dPCR platforms have been introduced commercially in recent years and more are being developed. These platforms differ in the method of partitioning, degree of automation, and multiplexing capabilities but all can be used in similar ways for sensitive and highly accurate quantification of a variety of nucleic acid targets. Currently, clinical applications of dPCR include oncology, microbiology and infectious disease, genetics, and prenatal/newborn screening. Commercially available tests for clinical applications are being developed for variants with diagnostic, prognostic, and therapeutic significance in specific disease types.

SUMMARY

The power of dPCR technology relies on the partitioning of the reactions and results in increased sensitivity and accuracy compared to qPCR. More recently, the sensitivity of dPCR has been applied to the detection of known variants in cell-free DNA and circulating tumor DNA. Future clinical applications of dPCR include liquid biopsy, treatment resistance detection, screening for minimal residual disease, and monitoring allograft engraftment in transplanted patients.

Fast and Accurate Multiplex Identification and Quantification of Seven Genetically Modified Soybean Lines Using Six-Color Digital PCR

The proliferation of genetically modified organisms (GMOs) presents challenges to GMO testing laboratories and policymakers. Traditional methods, like quantitative real-time PCR (qPCR), face limitations in quantifying the increasing number of GMOs in a single sample. Digital PCR (dPCR), specifically multiplexing, offers a solution by enabling simultaneous quantification of multiple GMO targets. This study explores the use of the Naica six-color Crystal dPCR platform for quantifying five GM soybean lines within a single six-plex assay. Two four-color assays were also developed for added flexibility. These assays demonstrated high specificity, sensitivity (limit of detection or LOD < 25 copies per reaction) and precision (bias to an estimated copy number concentration <15%). Additionally, two approaches for the optimization of data analysis were implemented. By applying a limit-of-blank (LOB) correction, the limit of quantification (LOQ) and LOD could be more precisely determined. Pooling of reactions additionally lowered the LOD, with a two- to eight-fold increase in sensitivity. Real-life samples from routine testing were used to confirm the assays' applicability for quantifying GM soybean lines in complex samples. This study showcases the potential of the six-color Crystal dPCR platform to revolutionize GMO testing, facilitating comprehensive analysis of GMOs in complex samples.

A Molecular Toolbox to Identify and Quantify Grape Varieties: On the Trace of "Glera"

A pillar of wine authenticity is the variety/ies used. Ampelographic descriptors and SSR markers, included in several national and international databases, are extensively used for varietal identification purposes. Recently, SNP markers have been proposed as useful for grape varietal identification and traceability. Our study has been directed toward the development of a molecular toolbox able to track grape varieties from the nursery to the must. Two complementary approaches were developed, exploiting SNP markers with two different technologies, i.e., a high-throughput platform for varietal identification and a digital PCR system for varietal quantification. As proof-of-concept, the toolbox was successfully applied to the identification and quantification of the "Glera" variety along the Prosecco wine production chain. The assays developed found their limits in commercial, aged wines.

A Chamber-Based Digital PCR Based on a Microfluidic Chip for the Absolute Quantification and Analysis of KRAS Mutation

The Kirsten rat sarcoma virus gene (KRAS) is the most common tumor in human cancer, and KRAS plays an important role in the growth of tumor cells. Normal KRAS inhibits tumor cell growth. When mutated, it will continuously stimulate cell growth, resulting in tumor development. There are currently few drugs that target the KRAS gene. Here, we developed a microfluidic chip. The chip design uses parallel fluid channels combined with cylindrical chamber arrays to generate 20,000 cylindrical microchambers. The microfluidic chip designed by us can be used for the microsegmentation of KRAS gene samples. The thermal cycling required for the PCR stage is performed on a flat-panel instrument and detected using a four-color fluorescence system. "Glass-PDMS-glass" sandwich structure effectively reduces reagent volatilization; in addition, a valve is installed at the sample inlet and outlet on the upper layer of the chip to facilitate automatic control. The liquid separation performance of the chip was verified by an automated platform. Finally, using the constructed KRAS gene mutation detection system, it is verified that the chip has good application potential for digital polymerase chain reaction (dPCR). The experimental results show that the chip has a stable performance and can achieve a dynamic detection range of four orders of magnitude and a gene mutation detection of 0.2%. In addition, the four-color fluorescence detection system developed based on the chip can distinguish three different KRAS gene mutation types simultaneously on a single chip.

Research Progress of Nucleic Acid Detection Technology for Genetically Modified Maize

Genetically modified (GM) maize is one of the earliest GM crops to have achieved large-scale commercial cultivation globally, and it is of great significance to excel in the development and implementation of safety policy regarding GM, and in its technical oversight. This article describes the general situation regarding genetically modified maize, including its varieties, applications, relevant laws and regulations, and so on. From a technical point of view, we summarize and critically analyze the existing methods for detecting nucleic acid levels in genetically modified maize. The nucleic acid extraction technology used for maize is explained, and the introduction of traditional detection techniques, which cover variable-temperature and isothermal amplification detection technology and gene chip technology, applications in maize are described. Moreover, new technologies are proposed, with special attention paid to nucleic acid detection methods using sensors. Finally, we review the current limitations and challenges of GM maize nucleic acid testing and share our vision for the future direction of this field.

Effect of Soybean Protein Concentrate Preparation on Copy Numbers and Structural Characteristics of DNA from Genetically Modified Soybean

To regulate the degradation of transgenic DNA and lay theoretical foundations for the rational utilization of genetically modified (GM) products, variations in copy numbers and structural characteristics of DNA from GM soybean event GTS 40-3-2 during soybean protein concentrate (SPC) preparation were evaluated. Results showed that defatting and the first ethanol extraction were key procedures inducing DNA degradation. After these two procedures, copy numbers of the lectin and cp4 epsps targets decreased by more than 4 × 10⁸, occupying 36.88-49.30% of the total copy numbers from raw soybean. Atomic force microscopy images visually revealed the degradation of DNA that thinned and shortened during SPC preparation. Circular dichroism spectra suggested a lower helicity of DNA from defatted soybean kernel flour and a conformation transition of DNA from B-type to A-type after ethanol extraction. The fluorescence intensity of DNA decreased during SPC preparation, verifying the DNA damage along this preparation chain.

Duplex droplet digital PCR (ddPCR) for simultaneous quantification of bovine and porcine gelatin in capsules

Detection of bovine and porcine in gelatin-based products is important as species fraud and product mislabeling may have a detrimental impact on customers who have health, ethical, and religious concerns about animal products. The duplex droplet digital PCR (ddPCR) assay using double-quenched probes has been developed for quantification and detection of porcine and bovine DNA in gelatin capsules. A DNA mixture derived from gelatin was found to have a limit of detection as low as 0.001 ng/µl for porcine samples and 0.01 ng/µl for bovine samples. DNA from 12 other distinct species was tested with the bovine and porcine probes, showing high specificity for this method. The test was validated using fifty-five commercial supplement and pharmaceutical capsules, of which 17 were positive for bovine and/or porcine DNA. This study shows that the duplex ddPCR is reliable for routine analysis in the identification of bovine and porcine origins for gelatin capsules.

Supplementary Information

The online version contains supplementary material available at 10.1007/s10068-022-01204-x.

Development of Digital Droplet PCR Targeting the Influenza H3N2 Oseltamivir-Resistant E119V Mutation and Its Performance through the Use of Reverse Genetics Mutants

The monitoring of antiviral-resistant influenza virus strains is important for public health given the availability and use of neuraminidase inhibitors and other antivirals to treat infected patients. Naturally occurring oseltamivir-resistant seasonal H3N2 influenza virus strains often carry a glutamate-to-valine substitution at position 119 in the neuraminidase (E119V-NA). Early detection of resistant influenza viruses is important for patient management and for the rapid containment of antiviral resistance. The neuraminidase inhibition assay allows the phenotypical identification of resistant strains; however, this test often has limited sensitivity with high variability depending on the virus strain, drugs and assays. Once a mutation such as E119V-NA is known, highly sensitive PCR-based genotypic assays can be used to identify the prevalence of such mutant influenza viruses in clinical samples. In this study, based on an existing reverse transcriptase real-time PCR (RT-qPCR) assay, we developed a reverse transcriptase droplet digital PCR assay (RT-ddPCR) to detect and quantify the frequency of the E119V-NA mutation. Furthermore, reverse genetics viruses carrying this mutation were created to test the performance of the RT-ddPCR assay and compare it to the standard phenotypic NA assay. We also discuss the advantage of using an RT-ddPCR instead of qPCR method in the context of viral diagnostics and surveillance.

Rapid Identification of Insecticide- and Herbicide-Tolerant Genetically Modified Maize Using Mid-Infrared Spectroscopy

Genetically modified (GM) technology is of great significance for increasing crop production, protecting biodiversity, and reducing environmental pollution. However, with the frequent occurrence of safety events regarding GM foods, more and more disputes have arisen over the potential safety of transgenic technology. It is particularly necessary to find a fast and accurate method for transgenic product identification. In this research, mid-infrared spectroscopy, coupled with chemometric methods, was applied to discriminate GM maize from its non-GM parent. A total of 120 GM maize and 120 non-GM maize samples were prepared, and the spectral information in the range of 400–4000 cm−1 was collected. After acquiring the spectra, wavelet transform (WT) was used to preprocess the data, and k-means was carried out to split all samples into calibration and prediction sets in the ratio of 2:1. Principal component analysis (PCA) was then conducted to qualitatively distinguish the two types of samples, and an apparent cluster was observed. Since the full spectrum covered a large amount of data and redundant information, we adopted the successive projections algorithm (SPA) to select optimal wavelengths for further analysis. Chemometrics, including partial least squares-discriminant analysis (PLS-DA), the k-nearest neighbor algorithm (KNN), and the extreme learning machine (ELM), were performed to establish classification models based on full spectra and optimal wavelengths. The overall results indicated that ELM models based on full spectra and optimal spectra showed better accuracy and reliability, with a 100% recognition rate in the calibration set and a 98.75% recognition rate in the prediction set. It has been confirmed that mid-infrared spectroscopy, combined with chemometric methods, can be a novel approach to identify transgenic maize.

IMPLANT: a new technique for transgene copy number estimation in plants using a single end-point PCR reaction

BACKGROUND

Copy number determination is one of the first steps in the characterization of transgenic plant lines. The classical approach to this, Southern blotting, is time-consuming, expensive and requires massive amounts of high-quality genomic DNA. Other PCR-based techniques are either inaccurate, laborious, or expensive.

RESULTS

Here, we propose a new technique, IMPLANT (Insertion of competitive PCR calibrator for copy number estimation), a competitive PCR-based technique in which the competitor (based on an endogenous gene) is also incorporated in the T-DNA, which then gets integrated in the genome together with the gene of interest. As the number of integrated competitor molecules directly corresponds to the number of transgene copies, the transgene copy number can be determined by a single PCR reaction. We demonstrate that the results of this technique closely correspond with those obtained by segregation analysis in Arabidopsis and digital PCR In rice, indicating that it is a powerful alternative for other techniques for copy number determination.

CONCLUSIONS

We show that this technique is not only reliable, but is also faster, easier, and cheaper as compared with other techniques. Accurate results are obtained in both Arabidopsis and rice, but this technique can be easily extended to other organisms and as such can be widely adopted in the field of biotechnology.

Quantitative analysis of CRISPR/Cas9-mediated provirus deletion in blue egg layer chicken PGCs by digital PCR

Primordial germ cells (PGCs), the precursors of sperm and oocytes, pass on the genetic material to the next generation. The previously established culture system of chicken PGCs holds many possibilities for functional genomics studies and the rapid introduction of desired traits. Here, we established a CRISPR/Cas9-mediated genome editing protocol for the genetic modification of PGCs derived from chickens with blue eggshell color. The sequence targeted in the present report is a provirus (EAV-HP) insertion in the 5'-flanking region of the SLCO1B3 gene on chromosome 1 in Araucana chickens, which is supposedly responsible for the blue eggshell color. We designed pairs of guide RNAs (gRNAs) targeting the entire 4.2 kb provirus region. Following transfection of PGCs with the gRNA, genomic DNA was isolated and analyzed by mismatch cleavage assay (T7EI). For absolute quantification of the targeting efficiencies in homozygous blue-allele bearing PGCs a digital PCR was established, which revealed deletion efficiencies of 29% when the wildtype Cas9 was used, and 69% when a high-fidelity Cas9 variant was employed. Subsequent single cell dilutions of edited PGCs yielded 14 cell clones with homozygous deletion of the provirus. A digital PCR assay proved the complete absence of this provirus in cell clones. Thus, we demonstrated the high efficiency of the CRISPR/Cas9 system in introducing a large provirus deletion in chicken PGCs. Our presented workflow is a cost-effective and rapid solution for screening the editing success in transfected PGCs.

Establishment and Validation of Reference Genes of Brassica napus L. for Digital PCR Detection of Genetically Modified Canola

As an effective tool for genetically modified organism (GMO) quantification in complex matrices, digital PCR (dPCR) has been widely used for the quantification of genetically modified (GM) canola events; however, little is known about the quantification of GM canola events using endogenous reference gene (ERG) characteristics by dPCR. To calculate and quantify the content of GM canola using endogenous reference gene (ERG) characteristics, the suitability of several ERGs of canola, such as cruciferin A (CruA), acetyl-CoA carboxylase (BnAcc), phosphoenolpyruvate carboxylase (PEP), cruciferin storage (BnC1), oleoyl hydrolase (Fat(A)), and high-mobility-group protein I/Y (HMG-I/Y), was investigated by droplet dPCR. BnAcc and BnC1 were more specific and stable in copy number in the genome of Brassica napus L. than the other genes. By performing intra-laboratory validation of the suitability of ERG characteristics for the quantification of GM canola events, the ddPCR methods for BnAcc and BnC1 were comprehensively demonstrated in dPCR assays. The methods could provide technical support for GM labeling regulations.

Advances in Electrochemical Techniques for the Detection and Analysis of Genetically Modified Organisms: An Analysis Based on Bibliometrics

Since the first successful transgenic plants obtained in 1983, dozens of plants have been tested. On the one hand, genetically modified plants solve the problems of agricultural production. However, due to exogenous genes of transgenic plants, such as its seeds or pollen drift, diffusion between populations will likely lead to superweeds or affect the original traits. The detection technology of transgenic plants and their products have received considerable attention. Electrochemical sensing technology is a fast, low-cost, and portable analysis technology. This review interprets the application of electrochemical technology in the analysis and detection of transgenic products through bibliometrics. A total of 83 research articles were analyzed, spanning 2001 to 2021. We described the different stages in the development history of the subject and the contributions of countries and institutions to the topic. Although there were more annual publications in some years, there was no explosive growth in any period. The lack of breakthroughs in this technology is a significant factor in the lack of experts from other fields cross-examining the subject. Through keyword co-occurrence analysis, different research directions on this topic were discussed. The use of nanomaterials with excellent electrical conductivity allows for more sensitive detection of GM crops by electrochemical sensors. Furthermore, co-citation analysis was used to interpret the most popular reports on the topic. In the end, we predict the future development of this topic according to the analysis results.

Single and multi-laboratory validation of a droplet digital PCR method

The authorisation of genetically modified food and feed in the EU is subject to the provision of evidence of safety and of the availability of reliable analytical methods. These methods represent an essential tool for official laboratories to enforce a harmonised market control.

Here the validation of droplet digital PCR (dPCR) methods has been performed for studying if the performance and acceptance parameters set by EU and other international guidelines for the analysis of genetically modified organisms (GMO) in food and feed are suitable and achievable also with such methods. The single-laboratory validation study showed that performance requirements set for GMO analysis by real time PCR can also be used to assess dPCR-based methods. Moreover, trueness and precision were assessed for both simplex and duplex formats in a multi-laboratory validation study organised according to international standards. Overall, the data on trueness, repeatability and reproducibility precision resulting from the collaborative study are satisfying the acceptance criteria for the respective parameters as stipulated in the EU and other international guidance such as the Codex Committee on Methods of Analysis and Sampling (CCMAS). For instance, the duplex droplet dPCR method for MON810 showed relative repeatability standard deviations from 1.8% to 15.7%, while the relative reproducibility standard deviation was found to be between 2.1% and 16.5% over the dynamic range studied. Moreover, the relative bias of the dPCR methods was well below 25% across the entire dynamic range.

In addition, other aspects supporting the application of digital PCR for the control of GMOs on the market were experimentally assessed such as the conversion of the measurement results from copy number ratio to mass fraction, the influence of the DNA extraction step and of the ingredient content. It was found that the DNA extraction step added only a limited contribution to the variability of the measurement results under the studied conditions. The decreasing amount of the target ingredient content may decrease the level of precision of the method, although within the acceptance range of GMO performance parameters.

•

In-house and collaborative validation studies of a droplet digital PCR method.

•

Trueness and precision assessed and compared for simplex and duplex formats in a collaborative study.

•

Evaluation of the influence of DNA extraction and ingredient content.

•

Description of compliance to EU and other international performance requirements for GMO analysis methods.

•

Application of conversion of measurement results from copy number ratios to mass fractions.

Ultrasensitive detection and quantification of viral nucleic acids with Raindance droplet digital PCR (ddPCR)

Sensitive detection of viral nucleic acids is critically important for diagnosis and monitoring of the progression of infectious diseases such as those caused by SARS-CoV2, HIV-1, and other viruses. In HIV-1 infection cases, assessing the efficacy of treatment interventions that are superimposed on combination antiretroviral therapy (cART) has benefited tremendously from the development of sensitive HIV-1 DNA and RNA quantitation assays. Simian immunodeficiency virus (SIV) infection of Rhesus macaques is similar in many key aspects to human HIV-1 infection and consequently this non-human primate (NHP) model has and continues to prove instrumental in evaluating HIV prevention, treatment and eradication approaches. Cell and tissue associated HIV-1 viral nucleic acids have been found to serve as useful predictors of disease outcome and indicators of treatment efficacy, highlighting the value of and the need for sensitive detection of viruses in cells/tissues from infected individuals or animal models. However, viral nucleic acid detection and quantitation in such sample sources can often be complicated by high nucleic acid input (that is required to detect ultralow level viruses in, for example, cure research) or inhibitors, leading to reduced detection sensitivity and under-quantification, and confounded result interpretation. Here, we present a step-by-step procedure to quantitatively recover cell/tissue associated viral DNA and RNA, using SIV-infected Rhesus macaque cells and tissues as model systems, and subsequently quantify the viral DNA and RNA with an ultrasensitive SIV droplet digital PCR (ddPCR) assay and reverse transcription ddPCR (RT-ddPCR) assay, respectively, on the Raindance ddPCR platform. The procedure can be readily adapted for a broad range of applications where highly sensitive nucleic acid detection and quantitation are required.

Development of an Event-Specific Droplet Digital PCR Assay for Quantification and Evaluation of the Transgene DNAs in Trace Samples of GM PRNP-Knockout Goat

The prion protein (PRNP) gene encoding prion protein is considered a prerequisite for the occurrence of scrapie disease, and knockout of the PRNP gene in transgenic goat is one effective approach to avoid scrapie. This study aims to establish an event-specific droplet digital polymerase chain reaction (ddPCR) assay to detect and quantify the content of genetically modified (GM) PRNP-knockout goat event KoP1. The developed ddPCR assay presents high specificity, sensitivity, accuracy, precision and wide dynamic range. The limits of detection and quantification were as low as 1.44 and 7.2 haploid genome equivalent (HGE) per reaction, respectively. Furthermore, this assay was successfully applied in quantifying the goat KoP1 GM content in milk, feces and living environmental soil samples. We believe that the developed ddPCR assay has the potential to be used in the evaluation of horizontal gene transfer and the practical risk assessment of GM goat event KoP1 and its derivatives.

Current commercial dPCR platforms: technology and market review

Digital polymerase chain reaction (dPCR) technology has provided a new technique for molecular diagnostics, with superior advantages, such as higher sensitivity, precision, and specificity over quantitative real-time PCRs (qPCR). Eight companies have offered commercial dPCR instruments: Fluidigm Corporation, Bio-Rad, RainDance Technologies, Life Technologies, Qiagen, JN MedSys Clarity, Optolane, and Stilla Technologies Naica. This paper discusses the working principle of each offered dPCR device and compares the associated: technical aspects, usability, costs, and current applications of each dPCR device. Lastly, up-and-coming dPCR technologies are also presented, as anticipation of how the dPCR device landscape may likely morph in the next few years.

A New Approach: Determining cyt b G143A Allele Frequency in Zymoseptoria tritici by Digital Droplet PCR

Z. tritici first appeared in Italy later than in northern-central European countries. QoIs fungicides currently play a role in STB control, used in combination with Demethylation Inhibitors (DMIs) or Succinate dehydrogenase Inhibitors (SDHIs). In this study, we set up a fast, sensitive, and accurate ddPCR protocol in order to investigate the presence and frequency of G143A substitution, causing a reduction in strobilurins’ efficacy in Z. tritici. The best PCR conditions for the clear separation of positive and negative droplets were identified. The lowest wild-type and resistant alleles frequencies were accurately determined on samples consisting of mixed DNAs from monoconidial cultures of Z. tritici and were expressed as fractional abundance. The protocol was tested by determining the copy number and frequency of alleles on gDNA purified in three Italian Z. tritici field populations representative of different fungicide management strategies. For the first time, the determination of allele concentration and the frequency of a mutation involved in Z. tritici fungicide resistance was carried out by employing digital PCR. This new approach provides a diagnostic tool that is rapid and able to detect very low G143A substitution percentages, which is very useful for fungicide resistance detection at early stages, thus, informing field management strategies for contrasting STB disease.

The Perspective of DMPK on Recombinant Adeno-Associated Virus-Based Gene Therapy: Past Learning, Current Support, and Future Contribution

Given the recent success of gene therapy modalities and the growing number of cell and gene-based therapies in clinical development across many different therapeutic areas, it is evident that this evolving field holds great promise for the unmet medical needs of patients. The recent approvals of Luxturna® and Zolgensma® prove that recombinant adeno-associated virus (rAAV)-based gene therapy is a transformative modality that enables curative treatment for genetic disorders. Over the last decade, Takeda has accumulated significant experience with rAAV-based gene therapies, especially in the early stage of development. In this review, based on the learnings from Takeda and publicly available information, we aim to provide a guiding perspective on Drug Metabolism and Pharmacokinetics (DMPK) substantial role in advancing therapeutic gene therapy modalities from nonclinical research to clinical development, in particular the characterization of gene therapy product biodistribution, elimination (shedding), immunogenicity assessment, multiple platform bioanalytical assays, and first-in-human (FIH) dose projection strategies.

Increasing the Efficiency of Canola and Soybean GMO Detection and Quantification Using Multiplex Droplet Digital PCR

Simple Summary

Digital PCR (dPCR) technology has been used for absolute quantification of genetically modified (GM) events. Duplex dPCR consisting of a target gene and a reference gene is mostly used for absolute quantification of GM events. We investigated the feasibility of absolute quantification of two, three, and four GM canola and soybean events at the same time using the QX200 Droplet Digital PCR (ddPCR) system. Adjustments of the probe concentrations and labels for some of the assays were needed for successful multiplex ddPCR. Absolute quantification of GM canola and soybean events was achieved for duplex, triplex, and tetraplex ddPCR at 0.1%, 1%, and 5% concentrations.

Abstract

The number of genetically modified (GM) events for canola, maize, and soybean has been steadily increasing. Real-time PCR is widely used for the detection and quantification of individual GM events. Digital PCR (dPCR) has also been used for absolute quantification of GM events. A duplex dPCR assay consisting of one reference gene and one GM event has been carried out in most cases. The detection of more than one GM event in a single assay will increase the efficiency of dPCR. The feasibility of detection and quantification of two, three, and four GM canola and soybean events at the same time was investigated at 0.1%, 1%, and 5% levels using the QX200 Droplet Digital PCR (ddPCR) system. The reference gene assay was carried out on the same plate but in different wells. For some of the assays, optimization of the probe concentrations and labels was needed for successful ddPCR. Results close to the expected result were achieved for duplex, triplex, and tetraplex ddPCR assays for GM canola events. Similar ddPCR results were also achieved for some GM soybean events with some exceptions. Overall, absolute quantification of up to four GM events at the same time improves the efficiency of GM detection.

Precise RNA Quantification by Counting Individual RNA Molecules Using High-Sensitivity Capillary Flow Cytometry

Precise determination of ribonucleic acid (RNA) concentration without the need for calibration was pursued by sequence-specific counting of individual RNA molecules. This approach eliminates the reverse transcription (RT) step required for polymerase chain reaction (PCR)-based quantification, which may hamper accurate measurements owing to uncertain yields of RT reactions. Target RNAs were tagged with a number of fluorescent oligonucleotide probes with complementary sequences. Tagged RNAs were exhaustively counted one by one using a high-sensitivity capillary-based flow cytometric setup. MS2 viral RNA was quantified as a model RNA for which essential parameters, including probe numbers, probe concentration, and hybridization conditions, were optimized for the best performance. Using 70 oligonucleotide probes, MS2 RNA was quantified with 2.0% relative standard deviation, and its validity was assessed by comparison with other RNA quantification methods such as droplet digital PCR and UV spectrophotometry. The observed comparability indicated that the proposed method is unlikely to have a substantial bias. It works for a substantially lower-level RNA than UV and avoids the potential variability in the yield of the RT reaction of RT-qPCR. Therefore, the proposed method could be a valuable addition to current methods and could be further developed as a standard reference method for RNA quantification.

One-Step Reverse Transcription Droplet Digital PCR Protocols for SARS-CoV-2 Detection and Quantification

Droplet digital polymerase chain reaction (ddPCR) is a third generation of PCR that was recently developed to overcome the limitation of direct quantification observed in real-time quantification PCR (qPCR). Recent studies have shown that ddPCR is more sensitive than the gold standard reverse transcription real-time quantitative polymerase chain reaction (RT-qPCR) in detecting severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) samples. In combination with multiplexing, multiple RT-ddPCR assays can be developed to directly quantify different SARS-CoV-2 nucleic acid targets within a single sample, significantly saving on cost and time. Since ddPCR is tolerant to a number of inhibitors unlike qPCR, it can be used to detect and quantify samples from complex environments like wastewater. Here we present three one-step RT-ddPCR protocols on how to develop simplex (one target), duplex (two targets), and triplex probe mix (three targets) assays for SARS-CoV-2 detection and quantification. The assays can be used for diagnosis or other research-related SARS-CoV-2 applications.

ddPCR allows 16S rRNA gene amplicon sequencing of very small DNA amounts from low-biomass samples

BACKGROUND

One limiting factor of short amplicon 16S rRNA gene sequencing approaches is the use of low DNA amounts in the amplicon generation step. Especially for low-biomass samples, insufficient or even commonly undetectable DNA amounts can limit or prohibit further analysis in standard protocols.

RESULTS

Using a newly established protocol, very low DNA input amounts were found sufficient for reliable detection of bacteria using 16S rRNA gene sequencing compared to standard protocols. The improved protocol includes an optimized amplification strategy by using a digital droplet PCR. We demonstrate how PCR products are generated even when using very low concentrated DNA, unable to be detected by using a Qubit. Importantly, the use of different 16S rRNA gene primers had a greater effect on the resulting taxonomical profiles compared to using high or very low initial DNA amounts.

CONCLUSION

Our improved protocol takes advantage of ddPCR and allows faithful amplification of very low amounts of template. With this, samples of low bacterial biomass become comparable to those with high amounts of bacteria, since the first and most biasing steps are the same. Besides, it is imperative to state DNA concentrations and volumes used and to include negative controls indicating possible shifts in taxonomical profiles. Despite this, results produced by using different primer pairs cannot be easily compared.

Droplet digital PCR as a tool for investigating dynamics of cryptic symbionts

Interactions among symbiotic organisms and their hosts are major drivers of ecological and evolutionary processes. Monitoring the infection patterns among natural populations and identifying factors affecting these interactions are critical for understanding symbiont-host relationships. However, many of these interactions remain understudied since the knowledge about the symbiont species is lacking, which hinders the development of appropriate tools. In this study, we developed a digital droplet PCR (ddPCR) assay based on apicomplexan COX1 gene to detect an undescribed agamococcidian symbiont. We show that the method gives precise and reproducible results and enables detecting cryptic symbionts in low target concentration. We further exemplify the assay's use to survey seasonally sampled natural host (Pygospio elegans) populations for symbiont infection dynamics. We found that symbiont prevalence differs spatially but does not show seasonal changes. Infection load differed between populations and was low in spring and significantly increased towards fall in all populations. We also found that the symbiont prevalence is affected by host length and population density. Larger hosts were more likely to be infected, and high host densities were found to have a lower probability of infection. The observed variations could be due to characteristics of both symbiont and host biology, especially the seasonal variation in encounter rates. Our findings show that the developed ddPCR assay is a robust tool for detecting undescribed symbionts that are otherwise difficult to quantify, enabling further insight into the impact cryptic symbionts have on their hosts.

High-Throughput and Accurate Determination of Transgene Copy Number and Zygosity in Transgenic Maize: From DNA Extraction to Data Analysis

It is vital to develop high-throughput methods to determine transgene copy numbers initially and zygosity during subsequent breeding. In this study, the target sequence of the previously reported endogenous reference gene hmg was analyzed using 633 maize inbred lines, and two SNPs were observed. These SNPs significantly increased the PCR efficiency, while the newly developed hmg gene assay (hmg-taq-F2/R2) excluding these SNPs reduced the efficiency into normal ranges. The TaqMan amplification efficiency of bar and hmg with newly developed primers was calculated as 0.993 and 1.000, respectively. The inter-assay coefficient of variation (CV) values for the bar and hmg genes varied from 1.18 to 2.94%. The copy numbers of the transgene bar using new TaqMan assays were identical to those using dPCR. Significantly, the precision of one repetition reached 96.7% of that of three repetitions of single-copy plants analyzed by simple random sampling, and the actual accuracy reached 95.8%, confirmed by T₁ and T₂ progeny. With the high-throughput DNA extraction and automated data analysis procedures developed in this study, nearly 2700 samples could be analyzed within eight hours by two persons. The combined results suggested that the new hmg gene assay developed here could be a universal maize reference gene system, and the new assay has high throughput and high accuracy for large-scale screening of maize varieties around the world.

Wastewater-Based Surveillance of Antibiotic Resistance Genes Associated with Tuberculosis Treatment Regimen in KwaZulu Natal, South Africa

Essential components of public health include strengthening the surveillance of infectious diseases and developing early detection and prevention policies. This is particularly important for drug-resistant tuberculosis (DR-TB), which can be explored by using wastewater-based surveillance. This study aimed to use molecular techniques to determine the occurrence and concentration of antibiotic-resistance genes (ARGs) associated with tuberculosis (TB) resistance in untreated and treated wastewater. Raw/untreated and treated (post-chlorination) wastewater samples were taken from three wastewater treatment plants (WWTPs) in South Africa. The ARGs were selected to target drugs used for first- and second-line TB treatment. Both conventional polymerase chain reaction (PCR) and the more advanced droplet digital PCR (ddPCR) were evaluated as surveillance strategies to determine the distribution and concentration of the selected ARGs. The most abundant ARG in the untreated wastewater was the rrs gene, associated with resistance to the aminoglycosides, specifically streptomycin, with median concentration ranges of 4.69–5.19 log copies/mL. In contrast, pncA gene, associated with resistance to the TB drug pyrazinamide, was the least detected (1.59 to 2.27 log copies/mL). Resistance genes associated with bedaquiline was detected, which is a significant finding because this is a new drug introduced in South Africa for the treatment of multi-drug resistant TB. This study, therefore, establishes the potential of molecular surveillance of wastewater for monitoring antibiotic resistance to TB treatment in communities.

A Digital PCR Assay to Quantify the Percentages of Hulled vs. Hulless Wheat in Flours and Flour-Based Products

Several food products, made from hulled wheats, are now offered by the market, ranging from grains and pasta to flour and bakery products. The possibility of verifying the authenticity of wheat species used at any point in the production chain is relevant, in defense of both producers and consumers. A chip digital PCR assay has been developed to detect and quantify percentages of hulless (i.e., common and durum wheat) and hulled (i.e., einkorn, emmer and spelt) wheats in grains, flours and food products. The assay has been designed on a polymorphism in the miRNA172 target site of the AP2-5 transcription factor localized on chromosome 5A and involved in wheat spike morphogenesis and grain threshability. The assay has been evaluated even in a real-time PCR system to assess its applicability and to compare the analytical costs between dPCR and real-time PCR approaches.

Simple, precise, and less-biased GMO quantification by multiplexed genetic element-specific digital PCR

BACKGROUND

To provide the consumer with choices of GMO or non-GMO, official food labeling systems were established in many countries. Because the threshold GMO content values were set to distinguish between "non-GMO" and "GMO" designations, GMO content quantification method are required for ensuring the appropriateness of labeling.

OBJECTIVE

As the number of GMOs is continuously increasing around the world, we set out to develop a low-cost, simple and less-biased analytical strategy to cover all necessary detection targets.

METHODS

Digital PCR methods are advantageous compared to the conventional quantitative real-time PCR methods. We developed a digital PCR-based GMO quantification method to evaluate the GMO content in maize grains. To minimize the analytical workload, we adopted multiplex digital PCR targeting 35S promoter and NOS terminator, which are genetic elements commonly introduced in many GMOs.

RESULTS

Our method is significantly simpler and more precise than the conventional real-time PCR-based methods. Additionally, we found that this method enables to quantify the copy number of GM DNA without double counting multiple elements (P35S and TNOS) tandemly placed in a recombinant DNA construct.

CONCLUSION

This is the first report on the development of a GM maize quantification method using the multiplexed genetic element-specific digital PCR method. The tandem effect we report here is quite useful for reducing the bias in the analytical results.

HIGHLIGHTS

Multiplexed genetic element-specific digital PCR can simplify weight-based GMO quantification and thus should prove useful in light of the continuous increase in the numbers of GM events.

Low-copy transgene detection using nested digital polymerase chain reaction for gene-doping control

Gene doping is prohibited for fair competition in human and horse sports. One style of gene doping is the administration of an exogeneous gene, called a transgene, to postnatal humans and horses. Although many transgene detection methods based on quantitative polymerase chain reaction (PCR), including real-time PCR and digital PCR, have been recently developed, it remains difficult to reliably detect low-copy transgenes. In this study, we developed and validated a nested digital PCR method to specifically detect low-copy transgenes. The nested digital PCR consists of (1) preamplification using conventional PCR and (2) droplet digital PCR detection using a hydrolysis probe. Using 5, 10, 20, 60 and 120 transgene copies as template, 496.0, 1089.7, 1820.7, 4313.3 and 7840.0 copies per microlitre, respectively, were detected using our nested digital PCR. Although high concentrations of phenol, proteinase K, ethanol, EDTA, heparin and genomic DNA all inhibited preamplification, their effects on the digital PCR detection were limited. Once preamplification was successful, even substitution of bases within the primers and probes had minimal effects on transgene detection. The nested digital PCR developed in this study successfully detected low-copy transgenes and can be used to perform a qualitative test, indicating its usefulness in the prevention of false positives and false negatives in gene-doping detection.

GmoDetector: An accurate and efficient GMO identification approach and its applications

The rapid increase of genetically modified organisms (GMOs) entering the food and feed markets, and the contamination of donor (micro)organisms of transgenic elements make it more challenging for the existing GMO detection. In this study, we developed a high-throughput and contamination-removal GMO detection approach named as GmoDetector. GmoDetector targeted 64 common transgenic elements and 76 GMO-specific events collected from 251 singular GM events, and combined with next generation sequencing (NGS) and target enrichment technology to detect various GMOs. As a result, GmoDetector was able to exclude the donor (micro)organism contamination, and detect the authorized and unauthorized GMOs (UGMOs) in any forms of food or feed, such as processed or unprocessed. The sensitivity of GmoDetector is as low as 0.1% (GMO content), which has met the GMO labeling threshold for all countries. Therefore, GmoDetector is a robust tool for accurate and efficient detection of the authorized and UGMOs.

Super Magnetic Niosomal Nanocarrier as a New Approach for Treatment of Breast Cancer: A Case Study on SK-BR-3 and MDA-MB-231 Cell Lines

In the present study, a magnetic niosomal nanocarrier for co-delivery of curcumin and letrozole into breast cancer cells has been designed. The magnetic NiCoFe2O4 core was coated by a thin layer of silica, followed by a niosomal structure, allowing us to load letrozole and curcumin into the silica layer and niosomal layer, respectively, and investigate their synergic effects on breast cancer cells. Furthermore, the nanocarriers demonstrated a pH-dependent release due to the niosomal structure at their outer layer, which is a promising behavior for cancer treatment. Additionally, cellular assays revealed that the nanocarriers had low cellular uptake in the case of non-tumorigenic cells (i.e., MCF-10A) and related high viability but high cellular uptake in cancer cell lines (i.e., MDA-MB-231 and SK-BR-3) and related low viability, which is evidenced in their high cytotoxicity against different breast cancer cell lines. The cytotoxicity of the letrozole/curcumin co-loaded nanocarrier is higher than that of the aqueous solutions of both drugs, indicating their enhanced cellular uptake in their encapsulated states. In particular, NiCoFe2O4@L-Silica-L@C-Niosome showed the highest cytotoxicity effects on MDA-MB-231 and SK-BR-3 breast cancer cells. The observed cytotoxicity was due to regulation of the expression levels of the studied genes in breast cancer cells, where downregulation was observed for the Bcl-2, MMP 2, MMP 9, cyclin D, and cyclin E genes while upregulation of the expression of the Bax, caspase-3, and caspase-9 genes was observed. The flow cytometry results also revealed that NiCoFe2O4@L-Silica-L@C-Niosome enhanced the apoptosis rate in both MDA-MB-231 and SK-BR-3 cells compared to the control samples. The findings of our research show the potential of designing magnetic niosomal formulations for simultaneous targeted delivery of both hydrophobic and hydrophilic drugs into cancer cells in order to enhance their synergic chemotherapeutic effects. These results could open new avenues into the future of nanomedicine and the development of theranostic agents.

Molecular Approaches to Agri-Food Traceability and Authentication: An Updated Review

In the last decades, the demand for molecular tools for authenticating and tracing agri-food products has significantly increased. Food safety and quality have gained an increased interest for consumers, producers, and retailers, therefore, the availability of analytical methods for the determination of food authenticity and the detection of major adulterations takes on a fundamental role. Among the different molecular approaches, some techniques such as the molecular markers-based methods are well established, while some innovative approaches such as isothermal amplification-based methods and DNA metabarcoding have only recently found application in the agri-food sector. In this review, we provide an overview of the most widely used molecular techniques for fresh and processed agri-food authentication and traceability, showing their recent advances and applications and discussing their main advantages and limitations. The application of these techniques to agri-food traceability and authentication can contribute a great deal to the reassurance of consumers in terms of transparency and food safety and may allow producers and retailers to adequately promote their products.

Pre-Degassed Microfluidic Chamber-Based Digital PCR Device for Meat Authentication Applications

Droplet digital polymerase chain reaction (ddPCR) suffers from the need for specific equipment and skilled personnel; thus, we here present a chamber-based digital PCR microfluidic device that is compatible with fluorescence image read-out systems and removes bubbles by a pre-degassed microfluidic device that consists of a pilot channel and micro chamber arrays. Digitalized PCR reagents are introduced into micro chambers, and thermocycles are taken to perform a DNA amplification process. Then, fluorescence images of a micro chamber array are read out and analyzed to obtain the total number of positive chambers. Thereby, the copy numbers of target DNA are calculated for quantitative detections. As a validation, this device is evaluated by the application of meat authentication. We performed dPCR tests using DNA templates extracted from a pure mutton DNA template with different dilutions. Then, the dPCR chip was used to identify the meat authentication using mutton–chicken mixtures with different mass ratios, showing its performance in real biotechnical applications.

Multiplexed digital polymerase chain reaction as a powerful diagnostic tool

The digital polymerase chain reaction (dPCR) multiplexing method can simultaneously detect and quantify closely related deoxyribonucleic acid sequences in complex mixtures. The dPCR concept is continuously improved by the development of microfluidics and micro- and nanofabrication, and different complex techniques are introduced. In this review, we introduce dPCR techniques based on sample compartmentalization, droplet- and chip-based systems, and their combinations. We then discuss dPCR multiplexing methods in both laboratory research settings and advanced or routine clinical applications. We focus on their strengths and weaknesses with regard to the character of biological samples and to the required precision of such analysis, as well as showing recently published work based on those methods. Finally, we envisage possible future achievements in this field.

Wastewater-Based Epidemiology as an Early Warning System for the Spreading of SARS-CoV-2 and Its Mutations in the Population

New methodologies based on the principle of "sewage epidemiology" have been successfully applied before in the detection of illegal drugs. The study describes the idea of early detection of a virus, e.g., SARS-CoV-2, in wastewater in order to focus on the area of virus occurrence and supplement the results obtained from clinical examination. By monitoring temporal variation in viral loads in wastewater in combination with other analysis, a virus outbreak can be detected and its spread can be suppressed early. The use of biosensors for virus detection also seems to be an interesting application. Biosensors are highly sensitive, selective, and portable and offer a way for fast analysis. This manuscript provides an overview of the current situation in the area of wastewater analysis, including genetic sequencing regarding viral detection and the technological solution of an early warning system for wastewater monitoring based on biosensors.

Development and assessment of a duplex droplet digital PCR method for quantification of GM rice Kemingdao

The implementation of genetically modified organism (GMO) labeling policies requires accurate quantitative methods to measure the GMO content in test samples. A Kemingdao/phospholipase D (KMD/PLD) duplex ddPCR method was established with rice genomic DNA (gDNA) of homozygous KMD as template by optimizing the annealing temperature and cycle number. Duplex ddPCR showed a linear response over the dynamic range from 68 to 175,000 copies, covering four orders of magnitude. The limit of detection (LOD) and limit of quantification (LOQ) for duplex ddPCR were determined to be 9 copies and 34 copies of the rice haploid genome, respectively. A very high dilution factor would result in unacceptable bias and coefficients of variation for determining copy number of the gDNA solution, and more than 1000 copies of the DNA template in one reaction is preferred to obtain accurate quantitative results by duplex PCR. Five blinded DNA samples with copy number ratio of 10%, 5%, 1%, 0.1%, and 0.05%, and three blinded real-life matrix samples with mass fraction of 5%, 1%, and 0.5% were quantified by duplex ddPCR, simplex ddPCR, and qPCR. These three methods all gave comparable GMO content and copy numbers within the required precision, but the duplex ddPCR showed the narrowest uncertainty interval and provided the highest precision in comparison to simplex ddPCR and qPCR. The ddPCR is a more appealing and reliable technology for the accurate quantification of GMO content than simplex ddPCR and qPCR considering the uncertainty and precision of quantitative results, the time consumption of generating droplets, and the cost of ddPCR reagents.

Challenges Using Droplet Digital PCR for Environmental Samples

Droplet digital polymerase chain reaction (ddPCR) is a method used to detect and quantify nucleic acids even when present in exceptionally low numbers. While it has proven to be valuable for clinical studies, it has failed to be widely adopted for environmental studies but despite some limitations, ddPCR may represent a better option than classical qPCR for environmental samples. Due to the complexity of the chemical and biological composition of environmental samples, protocols tailored to clinical studies are not appropriate, and results are difficult to interpret. We used environmental DNA samples originating from field studies to determine a protocol for environmental samples. Samples included field soils which had been inoculated with the soil fungus Rhizophagus irregularis (environmental positive control), field soils that had not been inoculated and the targeted fungus was not naturally present (environmental negative control), and root samples from both field categories. To control for the effect of soil inhibitors, we also included DNA samples of an organismal control extracted from pure fungal spores (organismal positive control). Finally, we included a no-template control consisting only of the PCR reaction reagents and nuclease free water instead of template DNA. Using original data, we examined which factors contribute to poor resolution in root and soil samples and propose best practices to ensure accuracy and repeatability. Furthermore, we evaluated manual and automatic threshold determination methods and we propose a novel protocol based on multiple controls that is more appropriate for environmental samples.

Muscat Flavor in Grapevine: A Digital PCR Assay to Track Allelic Variation in VvDXS Gene

The aroma of grapes and derived wines has long been one of the major traits considered in the selection of grapevine varieties through the centuries. In particular, Muscat aromatic grapes have been highly appreciated and widespread since ancient times. Monoterpenes are the key compounds responsible for the Muscat flavor. A major QTL affecting monoterpene level has been found to co-localize with the 1-deoxy-D-xylulose 5-phosphate synthase (VvDXS) gene, encoding for the 1-deoxy-D-xylulose 5-phosphate synthase enzyme involved in the plastidial pathway of terpene biosynthesis. In more detail, a single nucleotide polymorphism (SNP 1822) in the coding region of the gene causes a "gain of function" mutation, which is involved in Muscat flavor. In this work, we have developed a digital PCR-based assay to target allelic variations in the VvDXS gene, SNP1822, with the aim to propose a fast and sensitive analytical tool for targeting Muscat-flavored grapevine genotypes. The assay accurately predicts the genetic structure at 1822 SNP, critical for the development of the aroma in the great majority of Muscats. In the case of grapes in which the aromatic component is due to mutations other than SNP 1822 (e.g., Chasselas Musqué and Chardonnay Muscat), further specific assays can be developed.

Digital PCR for Genotype Quantification: A Case Study in a Pasta Production Chain

Simple Summary

Digital polymerase chain reaction (dPCR) is a breakthrough technology able to provide an absolute quantification of the target sequence through the compartmentalization of the sample and independent amplifications of the numerous separate compartments. Such technology has recently found several applications in plant science; however, to the best of our knowledge, it has never been applied until now for the detection and quantification of a specific plant variety along a production chain. As proof of concept, a dPCR assay targeted to the quantification of a durum wheat variety routinely used in an Italian premium pasta production chain has been developed.

Abstract

Digital polymerase chain reaction (dPCR) is a breakthrough technology based on the partitioning of the analytical sample and detection of individual end-point amplifications into the separate compartments. Among the numerous applications of this technology, its suitability in mutation detection is relevant and characterized by unprecedented levels of precision. The actual applicability of this analytical technique to quantify the presence of a specific plant genotype, in both raw materials and transformed products, by exploiting a point polymorphism has been evaluated. As proof of concept, an Italian premium pasta production chain was considered and a dPCR assay based on a durum wheat target variety private point mutation was designed and evaluated in supply-chain samples. From the results obtained, the assay can be applied to confirm the presence of a target variety and to quantify it in raw materials and transformed products, such as commercial grain lots and pasta. The performance, costs, and applicability of the assay has been compared to analytical alternatives, namely simple sequence repeats (SSRs) and genotype-by-sequencing based on Diversity Arrays Technology sequencing (DArTseq^TM).