Polycyclic aromatic hydrocarbons and metals in transplanted lichen (Pseudovernia furfuracea) at sites adjacent to a solid-waste landfill in central Italy

Heavy Metal Bioaccumulation in Peruvian Food and Medicinal Products

To better query regional sources of metal(loid) exposure in an under-communicated region, available scientific literature from 50 national universities (undergraduate and graduate theses and dissertations), peer-reviewed journals, and reports published in Spanish and English were synthesized with a focus on metal(loid) bioaccumulation in Peruvian food and medicinal products utilized locally. The study considered 16 metal(loid)s that are known to exert toxic impacts on humans (Hg, Al, Sb, As, Ba, Be, Cd, Cr, Sn, Ni, Ag, Pb, Se, Tl, Ti, and U). A total of 1907 individual analyses contained within 231 scientific publications largely conducted by Peruvian universities were analyzed. These analyses encompassed 239 reported species classified into five main food/medicinal groups-plants, fish, macroinvertebrates and mollusks, mammals, and "others" category. Our benchmark for comparison was the World Health Organization (Codex Alimentarius) standards. The organisms most frequently investigated included plants such as asparagus, corn, cacao, and rice; fish varieties like trout, tuna, and catfish; macroinvertebrates and mollusks including crab and shrimp; mammals such as alpaca, cow, chicken eggs, and milk; and other categories represented by propolis, honey, lichen, and edible frog. Bioaccumulation-related research increased from 2 to more than 25 publications per year between 2006 and 2022. The results indicate that Peruvian food and natural medicinal products can have dangerous levels of metal(loid)s, which can cause health problems for consumers. Many common and uncommon food/medicinal products and harmful metals identified in this analysis are not regulated on the WHO's advisory lists, suggesting the urgent need for stronger regulations to ensure public safety. In general, Cd and Pb are the metals that violated WHO standards the most, although commonly non-WHO regulated metals such as Hg, Al, As, Cr, and Ni are also a concern. Metal concentrations found in Peru are on many occasions much higher than what has been reported elsewhere. We conclude that determining the safety of food/medicinal products is challenging due to varying metal concentrations that are influenced not only by metal type but also geographical location. Given the scarcity of research findings in many regions of Peru, urgent attention is required to address this critical knowledge gap and implement effective regulatory measures to protect public health.

Determination of Polycyclic Aromatic Hydrocarbons (PAHs) in Leaf and Bark Samples of Sambucus nigra Using High-Performance Liquid Chromatography (HPLC)

Polycyclic aromatic hydrocarbons (PAHs) are ubiquitous organic compounds coming from natural or anthropogenic activities. Tree organs such as leaves and barks have been used to monitor urban air quality and have achieved remarkable ecological importance. However, the potential of many tree species as biomonitors is still unknown and efforts should be focused on conducting studies that analyze their capabilities with a viable analytical method. In this work, an analytical method for quantification of the 16 EPA priority PAHs from the leaves and bark of Sambucus nigra was validated. In general, the method showed good linearity, detection limits, precision, and recoveries, demonstrating that it is suitable for analyzing PAHs in both the leaves and bark of the Sambucus nigra species for which no analytical method for PAHs is yet available. The high prevalence of fluoranthene in the samples, which is a PAH related to coal combustion and biomass burning, and benzo[a]pyrene, which has a carcinogenic effect, was identified.

Determination of polycyclic aromatic hydrocarbons extracted from lichens by gas chromatography–mass spectrometry

Lichens are well-known biomonitors for semi-volatile pollutants, due to their ability to absorb and retain different chemical compounds such as Polycyclic Aromatic Hydrocarbons (PAHs), directly linked to levels in the atmosphere. Based on that, this paper proposes an analytical method capable of quantifying 16 EPA-PAHs from lichens found in an intertropical zone, as a natural alternative to typical capture methods, with the aim of monitoring atmospheres polluted by toxic compounds. An analytical protocol, including sample pre-treatment, followed by ultrasound extraction, clean-up in a chromatographic column, concentration and quantification by Gas Chromatography-Mass Spectrometry (GC-MS) using Selective Ion Monitoring has been developed. Additionally, a set of guidelines on lichen collection and sample handling is given, in order to achieve representative samples.•

Limits of quantification (LOQ) and detection (LOD) varied from 2.0 to 16 µg/L and 1.0 to 5.0 µg/L, respectively. Calibration curves had correlation coefficients higher than 0.99 in all cases.

•

Validation of the method for determining PAHs concentration associated to 30 lichen samples collected along two roads, with high and low traffic volumes was carried out.

•

The method showed good performance according to the sources of PAHs, traffic patterns and gradient in roads.

High spatial resolution analysis of polybrominated diphenyl ethers (PBDEs) using transplanted lichen Evernia prunastri: A case study in central Italy

The ability of transplanted lichen Evernia (E.) prunastri (L.) to act as a high spatial biomonitoring tool for 14 polybrominated diphenyl ethers (PBDEs) was evaluated at 23 monitoring sites in a very polluted area in central Italy. The selected area is characterized by the presence of numerous emission sources, such as waste-to-energy plant, steel plant, vehicular traffic, and domestic heating. Transplanted E. prunastri proved to be a useful tool to biomonitor PBDEs, due to its ability to bioaccumulate individual congeners in varying concentrations in relation to the strength of the emission sources present over the territory. PBDEs levels widely ranged from 132 to 24,237 ng kg^-1 dry weight, according to the sources of emission located around the monitoring sites. The highest concentrations were detected at the sites close to the municipal solid waste incinerator, steel plant, and high busy roads, confirming their important role as PBDEs emissions sources.

Polycyclic aromatic compounds (PACs) in the Canadian environment: A review of sampling techniques, strategies and instrumentation

A wide variety of sampling techniques and strategies are needed to analyze polycyclic aromatic compounds (PACs) and interpret their distributions in various environmental media (i.e., air, water, snow, soils, sediments, peat and biological material). In this review, we provide a summary of commonly employed sampling methods and strategies, as well as a discussion of routine and innovative approaches used to quantify and characterize PACs in frequently targeted environmental samples, with specific examples and applications in Canadian investigations. The pros and cons of different analytical techniques, including gas chromatography - flame ionization detection (GC-FID), GC low-resolution mass spectrometry (GC-LRMS), high performance liquid chromatography (HPLC) with ultraviolet, fluorescence or MS detection, GC high-resolution MS (GC-HRMS) and compound-specific stable (δ¹³C, δ²H) and radiocarbon (Δ¹⁴C) isotope analysis are considered. Using as an example research carried out in Canada's Athabasca oil sands region (AOSR), where alkylated polycyclic aromatic hydrocarbons and sulfur-containing dibenzothiophenes are frequently targeted, the need to move beyond the standard list of sixteen EPA priority PAHs and for adoption of an AOSR bitumen PAC reference standard are highlighted.

Forest health effects due to atmospheric deposition: Findings from long-term forest health monitoring in the Athabasca Oil Sands Region

Oil sands developments release acidifying compounds (SO₂ and NO₂) with the potential for acidifying deposition and impacts to forest health. This article integrates the findings presented in the Oil Sands Forest Health Special Issue, which reports on the results of 20 years of forest health monitoring, and addresses the key questions asked by WBEA's Forest Health Monitoring (FHM) Program: 1) is there evidence of deposition affecting the environment?, 2) have there been changes in deposition or effects over time?, 3) do acid deposition levels require management intervention?, 4) what are major sources of deposited substances? and 5) how can the program be improved? Deposition of sulphur, nitrogen, base cations (BC), polycyclic aromatic compounds and trace elements decline exponentially with distance from sources. There is little evidence for acidification effects on forest soils or on understory plant communities or tree growth, but there is evidence of nitrogen accumulation in jack pine needles and fertilization effects on understory plant communities. Sulphur, BC and trace metal concentrations in lichens increased between 2008 and 2014. Source apportionment studies suggest fugitive dust in proximity to mining is a primary source of BC, trace element and organic compound deposition, and BC deposition may be neutralizing acidifying deposition. Sulphur accumulation in soils and nitrogen effects on vegetation may indicate early stages of acidification. Deposition estimates for sites close to emissions sources exceed proposed regulatory trigger levels, suggesting a detailed assessment of acidification risk close to the emission sources is warranted. However, there is no evidence of widespread acidification as suggested by recent modeling studies, likely due to high BC deposition. FHM Program evolution should include continued integration with modeling approaches, ongoing collection and assessment of monitoring data and testing for change over time, and addition of monitoring sites to fill gaps in regional coverage.

Combined magnetic, chemical and morphoscopic analyses on lichens from a complex anthropic context in Rome, Italy

Native and transplanted lichens were analyzed as bioaccumulators of airborne particulate matter (PM) in an eastern district of Rome, Italy, where frequent fraudulent fires are set to recover metals, mostly copper, from waste electrical and electronic equipment (WEEE). The presence of native lichens was scarce, due to the drought of spring-summer 2017, thus, sampling was extended to a neighboring area for toughening the dataset to a similar context. The magnetic analyses revealed intense properties connected to the anthropic complexity of the zone, where industrial, traffic and arson-related dusts are emitted and bio-accumulated. Magnetic and chemical analyses were compared, leading to significant linear correlations between the concentration dependent magnetic parameters (susceptibility, saturation magnetization and saturation remanence) and the concentration of heavy metals, among which copper, chrome, lead and zinc. Moreover, selected magnetic particles were chemically and morphologically characterized by Scanning Electron Microscope and Energy Dispersion System microanalyses. Magnetic particles resulted incorporated into the lichens' tissues and their composition, morphology and grain size strongly supported their anthropogenic, mostly combustion-related, origin. Even if, given the complexity of the area, it was not feasible to fully discriminate the multiple anthropogenic sources, magnetic biomonitoring of lichens, especially when combined with microtextural and compositional analyses, confirmed to be an excellent methodology for a rapid characterization of environmental pollution.

Air quality assessment in different environmental scenarios by the determination of typical heavy metals and Persistent Organic Pollutants in native lichen Xanthoria parietina

The study was aimed to evaluate the ability of native lichen Xanthoria (X.) parietina to biomonitor and bioaccumulate some heavy metals (As, Cd, Co, Cr, Ni, Pb), PAHs, PCDDs, PCDFs, PCBs and PBDEs and to evaluate the use of the native X. parietina as a multi-tracer tool for scenarios characterized by different anthropogenic pressures. Samples of native X. parietina were collected in six different sites (two green, two residential and two industrial areas, respectively) and analyzed for the target compounds. The results show that X. parietina was a useful tool for the biomonitoring of air quality in the selected areas, and was able to bioaccumulate all the studied metals and POPs. In particular, the total concentrations dry weight (dw) ranged between 8.1 and 103.4 mg kg^-1 for metals, from 113 × 10³ to 183 × 10³ ng kg^-1 for PAHs, from 868 to 7685 ng kg^-1 for PCBs, from 14.3 to 113.8 ng kg^-1 for PCDDs/Fs (∑TEq = 0.9-7.1), and from 194 to 554 ng kg^-1 for PBDEs. Besides, in general, the levels of analytes recovered in the different samples of lichen show an increasing trend from green to industrial sites, especially for PCBs (mean values equal to 1218, 4253 and 7192 ng kg^-1 respectively for green, residential and industrial areas). The statistical approach, based on Pearson's correlation and principal component analysis tests, showed that one of the industrial sites was well-separated from the others, that resulted grouped due to some similarities.

Lichens as a spatial record of metal air pollution in the industrialized city of Huelva (SW Spain)

Huelva is a highly industrialized city in SW Spain hosting, among others, a Cu smelter, a phosphate fertilizer plant, a power plant, and oil refineries. This study aims to evaluate metal concentrations in lichens as bioindicators of atmospheric pollution in the impacted urban areas. Xanthoria parietina species from Huelva and nearby villages, as well as reference samples from remote, non-contaminated urban areas, were analyzed for trace elements (V, Cr, Mn, Co, Ni, Cu, Zn, Sr, As, Cd, Sb, Cs, Ba, La, Ce, Pr, Nd, Sm, Er, Tm, Yb, Lu, Pb, Th, U) using Inductively Coupled Plasma-Mass Spectrometry; and for major elements (Ca, K, Mg, P, and S) by Inductively Coupled Plasma-Optical Emission Spectrometry after acid digestion. The metal composition of X. parietina exhibits spatial distribution patterns with extremely elevated concentrations (Co, Ni, Cu, Zn, As, Cd, Sb, Ba, Pb, U, and S) in the surroundings of the industrial estates to <1 km distance. Mean concentrations were significantly lower in the urban areas >1 km from the pollution sources. However, air pollution persists in the urban areas up to 4 km away, as the mean concentrations of Cu, Zn, As, Cd, Sb and S remained considerably elevated in comparison to the reference samples. Though rigorous source apportionment analysis was not the aim of this study, a good positive correlation of our results with metal abundances in ambient particulate matter and in pollution sources points to the Cu smelter as the main source of pollution. Hence, the severe air pollution affecting Huelva and nearby urban areas may be considered a serious health risk to local residents.

Impact factor assessment of the uptake and accumulation of polycyclic aromatic hydrocarbons by plant leaves: Morphological characteristics have the greatest impact

Polycyclic aromatic hydrocarbons (PAHs) have toxic, teratogenic, mutagenic and carcinogenic effects on living organisms. Plants can function as pollutant bioindicators and bioaccumulators due to their wide surface distribution and specific responses to atmospheric pollutants. However, various plants exhibit significant differences in their capacities to accumulate PAHs. At present, research has mainly focused on the effects of leaf morphology and physiological characteristics, and few studies have evaluated the effects of the leaf surface on PAH accumulation. We aimed to assess the factors impacting the uptake and accumulation of PAHs by leaves. We selected 8 common tree species in Shanghai, China, and used supercritical fluid extraction technology to determine the content of PAHs in their leaves. Specific measurements of leaf area, width/length, wax content, and stomatal density were applied to index the morphological and physiological characteristics; surface roughness, surface free energy, polar components, and dispersion components were compiled into an adsorption performance index. Principal component analysis (PCA) and canonical correlation analysis (CCA) were used to assess the effects of different leaf characteristics on PAH accumulation. We found that the mean concentrations of ΣPAHs ranged from 300 to 2000 ng·g^-1 and that the proportions of different benzene rings were significantly different among the different tree species. Leaf morphology and physiological characteristics had more significant effects compared to surface adsorption. CCA showed a significant negative correlation between leaf morphological characteristics and wax content, but had no significant correlation with surface adsorption. Low-molecular-weight PAHs were found to be mainly affected by the morphological characteristics, while medium- and high-molecular-weight PAHs were influenced by wax content and adsorption. Our conclusions provide a theoretical basis for the establishment of a reliable plant atmosphere-monitoring system and a method for screening tree species with strong PAH adsorption capacity.

Metal accumulation and physiological response of the lichens transplanted near a landfill in central Lithuania

Landfilling is the most widely used method for disposal of municipal waste. The waste disposal sites are a matter of concern due to their adverse effects on the environment and health. Lichen Evernia prunastri and Ramalina farinacea were used for biomonitoring the effect of air pollution around the largest municipal landfill in Lithuania. Lichen transplants were exposed for 3.5 months up to 400 m from the landfill. Accumulation of heavy metals, except Cd, did not showed relevant differences in samples between landfill and control. Potential quantum yield expressed as F_V/F_M in thalli was affected at the closest to the pollution source sites and the values were lower in comparison with the control. The conductivity of leachate and peroxidated membrane lipids (TBARS) increased in lichen material transplanted at sites facing the landfill.

Assessing indoor air quality of school environments: transplanted lichen Pseudovernia furfuracea as a new tool for biomonitoring and bioaccumulation

The aim of this research is to evaluate the ability of transplanted lichen Pseudovernia (P). furfuracea to biomonitor and bioaccumulate in urban indoor environments. The elements As, Cd, Cr, Cu, Hg, Ni and Pb and 12 selected polycyclic aromatic hydrocarbons (PAHs) were used to assess P. furfuracea as a biomonitoring tool for the indoor air quality of school environments. To achieve this purpose, lichen samples were exposed for 2 months in the outdoor and indoor environments of five school settings located in urban and rural areas. The results demonstrated that transplanted lichen P. furfuracea is a suitable biomonitoring tool for metals and PAHs in indoor settings and can discriminate between different levels of air pollution related to urbanisation and indoor conditions, such as those characterised by school environments. A transplanted lichen biomonitoring strategy is cost-effective, "green", educational for attending children and less "invasive" than traditional air sampling methods. The feasibility of indoor monitoring by P. furfuracea is a relevant finding and could be a key tool to improve air quality monitoring programmes in school scenarios and thus focus on health prevention interventions for children, who are one of the most susceptible groups in the population.

Monitoring PAHs in the petrochemical area of Tarragona County, Spain: comparing passive air samplers with lichen transplants

The levels of 16 polycyclic aromatic hydrocarbons (PAHs) were determined in 8 passive air samples (PAS) and 6 lichen transplants (Ramalina fastigiata) deployed for a period of 2 months in different zones of Tarragona County (Catalonia, Spain), an area with an important number of chemical and petrochemical industries. The accumulated amount of the sum of the 16 PAHs ranged between 1363 to 7866 ng/sample in air samples. The highest concentration was found in the neighborhood of Puigdelfí (village of Perafort), in the vicinity of a big oil refinery and well under the potential influence of the petrochemical emissions. In lichen samples, the sum of the 16 PAHs ranged between 247 and 841 ng/g (dry weight), being the greatest value also observed in Puigdelfí. Data on the levels and profiles of PAHs in both passive monitoring methods were compared. A significant positive linear correlation was found between the concentrations of low molecular weight PAHs in lichens and the amounts accumulated in passive air samples (R = 0.827, P < 0.05), being especially significant the correlation of 4-ring PAHs (R = 0.941, P < 0.05). These results strongly suggest that lichens can be used to monitor gas-phase PAHs, providing data that can be quantitatively translated into equivalents for air.

Heavy element accumulation in Evernia prunastri lichen transplants around a municipal solid waste landfill in central Italy

This paper presents the results of a biomonitoring study to evaluate the environmental impact of airborne emissions from a municipal solid waste landfill in central Italy. Concentrations of 11 heavy elements, as well as photosynthetic efficiency and cell membrane integrity were measured in Evernia prunastri lichens transplanted for 4months in 17 monitoring sites around the waste landfill. Heavy element contents were also determined in surface soils. Analytical data indicated that emissions from the landfill affected Cd, Co, Cr, Cu, Ni, Pb, Sb and Zn concentrations in lichens transplanted within the landfill and along the fallout direction. In these sites moderate to severe accumulation of these heavy elements in lichens was coupled with an increase in cell membrane damage and decrease in photosynthetic efficiency. Nevertheless, results indicated that landfill emissions had no relevant impact on lichens, as heavy element accumulation and weak stress symptoms were detected only in lichen transplants from sites close to solid waste. The appropriate management of this landfill poses a low risk of environmental contamination by heavy elements.

Epiphytic lichens as indicators of environmental quality around a municipal solid waste landfill (C Italy)

Epiphytic lichens have been used as indicators of environmental quality around a municipal solid waste landfill in C Italy. An integrated approach, using the diversity of epiphytic lichens, as well as element bioaccumulation and physiological parameters in the lichen Flavoparmelia caperata (L.) Hale was applied along a transect from the facility. The results highlighted the biological effects of air pollution around the landfill. The Index of Lichen Diversity (ILD) increased and the content of heavy metals (Cr, Cd, Cu, Fe, Ni and Zn) decreased with distance from the landfill. Clear stress signals were observed in lichens growing in front of the facility, i.e. discoloration, necrosis, membrane lipid peroxidation, lower ergosterol content, higher dehydrogenase activity. Decreased photosynthetic efficiency, altered chlorophyll integrity and production of secondary metabolites were also found. The results suggested that lichens can be profitably used as bioindicators of environmental quality around landfills.

Retention and mitigation of metals in sediment, soil, water, and plant of a newly constructed root-channel wetland (China) from slightly polluted source water

Constructed root-channel wetland (CRCW) is a term for pre-pond/wetland/post-pond complexes, where the wetland includes plant-bed/ditch landscape and root-channel structure. Source water out of pre-ponds flows through alternate small ditches and plant beds with root-channels via a big ditch under hydraulic regulation. Then source water flows into post-ponds to finish final polishing. This article aims to explore the potential of components of a pilot CRCW in China on mitigating metals in micro-polluted source water during its initial operation stage. We investigated six heavy metals (Cd, Cr, Cu, Ni, Zn, and Pb) in surface sediment, plant-bed subsurface soil, water, and aquatic plants during 2012–2013. Monitoring results showed that pond/ditch sediments and plant-bed soil retained a significant amount of Cr, Ni, and Zn with 93.1%, 72.4%, and 57.5% samples showing contamination factor above limit 1 respectively. Remarkably the high values of metal enrichment factor (EF) occurred in root-channel zones. Water monitoring results indicated that Ni, Zn, and Pb were removed by 78.5% (66.7%), 57.6% (59.6%), and 26.0% (7.5%) in east (west) wetland respectively. Mass balance estimation revealed that heavy metal mass in the pond/ditch sediments accounted for 63.30% and that in plant-bed soil 36.67%, while plant uptake occupied only 0.03%. The heavy metal accretion flux in sediments was 0.41 - 211.08 μg · cm^-2 · a^-1, less than that in plant-bed soil (0.73 - 543.94 μg · cm^-2 · a^-1). The 1.83 ha wetland has retained about 86.18 kg total heavy metals within 494 days after operation. This pilot case study proves that constructed root-channel wetland can reduce the potential ecological risk of purified raw water and provide a new and effective method for the removal of heavy metals from drinking water sources.